Raspberry Pi Model 4 Benchmarks

ARMv8 with R8A774A1

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 2311271-NE-1907127HV04
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 7 Tests
CPU Massive 8 Tests
Creator Workloads 5 Tests
Encoding 3 Tests
Multi-Core 5 Tests
Programmer / Developer System Benchmarks 2 Tests
Server 3 Tests
Server CPU Tests 4 Tests
Single-Threaded 7 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
RPi Model 3 B+
June 28 2019
  12 Hours, 20 Minutes
ASUS Tinker Board
July 01 2019
  3 Hours, 39 Minutes
Libre Board ALL-H3-CC H5
July 02 2019
  3 Hours, 34 Minutes
Firefly ROC-RK3328-CC
July 04 2019
  2 Hours, 14 Minutes
RPi Model 4 B 4GB
July 11 2019
  4 Hours, 45 Minutes
RPi Model 4 B 2GB
July 11 2019
  2 Hours, 24 Minutes
Beacon RZ/G2M
November 27 2023
  2 Hours, 22 Minutes
Beacon RZ/G2M-64
November 27 2023
  2 Hours, 13 Minutes
Invert Hiding All Results Option
  4 Hours, 11 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

RPi Model 4 B 2GB

Changed Memory to 2048MB.

Changed Graphics to V3D 4.2 2GB.

Beacon RZ/G2M

Processor: ARMv8 Cortex-A53 @ 1.50GHz (2 Cores / 6 Threads), Motherboard: Beacon EmbeddedWorks RZ/G2M Development Kit, Memory: 4096MB, Disk: 64GB SD64G + 31GB DG4032, Graphics: DRM emulated, Monitor: LG HDR 4K

OS: Ubuntu 23.10, Kernel: 4.19.198-cip54-yocto-standard-gcf2469b18e55-dirty (aarch64), Compiler: GCC 13.2.0, File-System: ext4, Screen Resolution: 720x480

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-serialization=2 --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 3.11.6
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Vulnerable + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Vulnerable + srbds: Not affected + tsx_async_abort: Not affected

Beacon RZ/G2M-64

OS: Ubuntu 23.10, Kernel: 4.19.198-cip54-yocto-standard-gcf2469b18e55-dirty (aarch64), Compiler: GCC 13.2.0, File-System: ext4, Screen Resolution: 3840x2160

Raspberry Pi Model 4 BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorOSKernelDisplay ServerCompilerFile-SystemScreen ResolutionDesktopDisplay DriverOpenGLRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBBeacon RZ/G2MBeacon RZ/G2M-64ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3926MB32GB GB2MWBCM2708Raspbian 104.19.42-v7+ (armv7l)X Server 1.20.4GCC 8.3.0ext4656x416ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161024x768ARMv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H5Raspbian 9.64.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CCUbuntu 18.044.4.114 (aarch64)X Server 1.18.4GCC 7.4.01024x768ARMv7 rev 3 @ 1.50GHz (4 Cores)BCM2835 Raspberry Pi 4 Model B Rev 1.14096MB16GB SC16GV3D 4.2 4GBDELL P2415QRaspbian 104.19.50-v7l+ (armv7l)LXDE 0.10.0X Server 1.20.4modesetting 1.20.42.1 Mesa 19.1.0-develGCC 8.3.02048MBV3D 4.2 2GBARMv8 Cortex-A53 @ 1.50GHz (2 Cores / 6 Threads)Beacon EmbeddedWorks RZ/G2M Development Kit4096MB64GB SD64G + 31GB DG4032DRM emulatedLG HDR 4KUbuntu 23.104.19.198-cip54-yocto-standard-gcf2469b18e55-dirty (aarch64)GCC 13.2.0720x4803840x2160OpenBenchmarking.orgCompiler Details- RPi Model 3 B+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Libre Board ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v - RPi Model 4 B 4GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - RPi Model 4 B 2GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - Beacon RZ/G2M: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-serialization=2 --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v - Beacon RZ/G2M-64: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-serialization=2 --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v Processor Details- RPi Model 3 B+: Scaling Governor: BCM2835 Freq ondemand- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- RPi Model 4 B 4GB: Scaling Governor: BCM2835 Freq ondemand- RPi Model 4 B 2GB: Scaling Governor: BCM2835 Freq ondemand- Beacon RZ/G2M: Scaling Governor: cpufreq-dt performance- Beacon RZ/G2M-64: Scaling Governor: cpufreq-dt performancePython Details- RPi Model 3 B+: Python 2.7.16 + Python 3.7.3- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Libre Board ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.7- RPi Model 4 B 4GB: Python 2.7.16 + Python 3.7.3- RPi Model 4 B 2GB: Python 2.7.16 + Python 3.7.3- Beacon RZ/G2M: Python 3.11.6- Beacon RZ/G2M-64: Python 3.11.6Kernel Details- Beacon RZ/G2M, Beacon RZ/G2M-64: Transparent Huge Pages: alwaysSecurity Details- Beacon RZ/G2M, Beacon RZ/G2M-64: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Vulnerable + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Vulnerable + srbds: Not affected + tsx_async_abort: Not affected

RPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBBeacon RZ/G2MBeacon RZ/G2M-64Result OverviewPhoronix Test Suite100%338%575%813%1050%FLAC Audio EncodingSmallptLAME MP3 EncodingPerl BenchmarksSciMarkGraphicsMagickZstd CompressionPyBench

Raspberry Pi Model 4 Benchmarksx264: H.264 Video Encodingrust-prime: Prime Number Test To 200,000,000encode-flac: WAV To FLACnginx: Static Web Page Servingcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19pybench: Total For Average Test Timessmallpt: Global Illumination Renderer; 128 Samplesperl-benchmark: Pod2htmlencode-mp3: WAV To MP3phpbench: PHP Benchmark Suiteperl-benchmark: Interpretergraphics-magick: Rotategraphics-magick: Resizingscimark2: CompositeRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBBeacon RZ/G2MBeacon RZ/G2M-640.143106.15777.652012.06787.0129609744.552.56511278658.82202750.03173653161548.803.321052.48135.253880.15239.989312273.300.78254268162.41594500.012298046653141.72566.40402.1340683424.022.57273250518.49213450.01091688242228.762.31140.20288.92343.3113542251.361.31659761295.44541310.00491447443651.133.101104.33111.094745.75291.485249260.720.61207402125.341015640.007784056345142.174.91657.76111.485104.85291.555233145.500.62136299125.221006780.008260856453143.025.92155.446125.129803.6514794139.1090.67471395130.2440.004798527561120.265.84155.433127.868806.7684812139.1410.67412224130.2850.004952257061120.16OpenBenchmarking.org

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-09-25H.264 Video EncodingBeacon RZ/G2MBeacon RZ/G2M-64RPi Model 4 B 2GBASUS Tinker BoardRPi Model 4 B 4GBFirefly ROC-RK3328-CCRPi Model 3 B+1.3322.6643.9965.3286.66SE +/- 0.05, N = 9SE +/- 0.08, N = 3SE +/- 0.06, N = 3SE +/- 0.06, N = 12SE +/- 0.08, N = 12SE +/- 0.00, N = 3SE +/- 0.00, N = 35.925.844.913.323.102.310.141. (CC) gcc options: -ldl -lm -lpthread

Rust Prime Benchmark

Based on petehunt/rust-benchmark, this is a prime number benchmark that is multi-threaded and written in Rustlang. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterRust Prime BenchmarkPrime Number Test To 200,000,000Firefly ROC-RK3328-CCBeacon RZ/G2M-64Beacon RZ/G2MRPi Model 4 B 2GBASUS Tinker BoardRPi Model 4 B 4GBRPi Model 3 B+7001400210028003500SE +/- 0.21, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 5.80, N = 3SE +/- 3.97, N = 3SE +/- 18.94, N = 3140.20155.43155.45657.761052.481104.333106.15-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil1. (CC) gcc options: -pie -nodefaultlibs

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACRPi Model 4 B 4GBRPi Model 4 B 2GBBeacon RZ/G2MBeacon RZ/G2M-64ASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+2004006008001000SE +/- 0.69, N = 25SE +/- 0.35, N = 5SE +/- 0.99, N = 20SE +/- 0.86, N = 20SE +/- 2.04, N = 5SE +/- 0.88, N = 5SE +/- 0.71, N = 5SE +/- 3.13, N = 5111.09111.48125.13127.87135.25288.92566.40777.65-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

NGINX Benchmark

This is a test of ab, which is the Apache Benchmark program running against nginx. This test profile measures how many requests per second a given system can sustain when carrying out 2,000,000 requests with 500 requests being carried out concurrently. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterNGINX Benchmark 1.9.9Static Web Page ServingRPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardRPi Model 3 B+11002200330044005500SE +/- 4.09, N = 3SE +/- 48.94, N = 9SE +/- 35.02, N = 3SE +/- 7.80, N = 35104.854745.753880.152012.061. (CC) gcc options: -lpthread -lcrypt -lcrypto -lz -O3 -march=native

Static Web Page Serving

Beacon RZ/G2M: The test quit with a non-zero exit status. The test quit with a non-zero exit status. The test quit with a non-zero exit status. E: ./nginx: 2: ./nginx_/ab: not found

Beacon RZ/G2M-64: The test quit with a non-zero exit status. The test quit with a non-zero exit status. The test quit with a non-zero exit status. E: ./nginx: 2: ./nginx_/ab: not found

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ASUS Tinker BoardRPi Model 4 B 4GBRPi Model 4 B 2GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+Beacon RZ/G2MBeacon RZ/G2M-642004006008001000SE +/- 0.46, N = 3SE +/- 2.54, N = 3SE +/- 1.74, N = 3SE +/- 0.30, N = 3SE +/- 7.90, N = 3SE +/- 1.73, N = 3SE +/- 1.76, N = 3SE +/- 5.99, N = 3239.98291.48291.55343.31402.13787.01803.65806.77-pthread -lz -llzma-pthread -lz-pthread -lz-pthread -lz -llzma-pthread -lz -llzma-pthread -lz -llzma1. (CC) gcc options: -O3

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesBeacon RZ/G2MBeacon RZ/G2M-64RPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+Libre Board ALL-H3-CC H59K18K27K36K45KSE +/- 2.60, N = 3SE +/- 5.04, N = 3SE +/- 10.37, N = 3SE +/- 6.93, N = 3SE +/- 24.84, N = 3SE +/- 15.60, N = 3SE +/- 81.94, N = 3SE +/- 186.40, N = 347944812523352499312135422960940683

Smallpt

Smallpt is a C++ global illumination renderer written in less than 100 lines of code. Global illumination is done via unbiased Monte Carlo path tracing and there is multi-threading support via the OpenMP library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 128 SamplesBeacon RZ/G2MBeacon RZ/G2M-64RPi Model 4 B 2GBFirefly ROC-RK3328-CCRPi Model 4 B 4GBASUS Tinker BoardLibre Board ALL-H3-CC H5RPi Model 3 B+160320480640800SE +/- 0.34, N = 3SE +/- 0.13, N = 3SE +/- 1.73, N = 6SE +/- 1.61, N = 3SE +/- 3.41, N = 3SE +/- 1.48, N = 3SE +/- 0.66, N = 3SE +/- 0.52, N = 3139.11139.14145.50251.36260.72273.30424.02744.551. (CXX) g++ options: -fopenmp -O3

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlRPi Model 4 B 4GBRPi Model 4 B 2GBBeacon RZ/G2M-64Beacon RZ/G2MASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+Libre Board ALL-H3-CC H50.57891.15781.73672.31562.8945SE +/- 0.00287922, N = 3SE +/- 0.00462631, N = 3SE +/- 0.00675119, N = 3SE +/- 0.00814516, N = 4SE +/- 0.00901113, N = 3SE +/- 0.01503227, N = 3SE +/- 0.04479638, N = 9SE +/- 0.00916360, N = 30.612074020.621362990.674122240.674713950.782542681.316597612.565112782.57273250

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3RPi Model 4 B 2GBRPi Model 4 B 4GBBeacon RZ/G2MBeacon RZ/G2M-64ASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+140280420560700SE +/- 0.10, N = 3SE +/- 0.05, N = 3SE +/- 0.03, N = 3SE +/- 0.10, N = 3SE +/- 0.53, N = 3SE +/- 0.43, N = 3SE +/- 0.09, N = 3SE +/- 9.15, N = 3125.22125.34130.24130.29162.41295.44518.49658.821. (CC) gcc options: -lm

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteRPi Model 4 B 4GBRPi Model 4 B 2GBASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+20K40K60K80K100KSE +/- 239.15, N = 3SE +/- 519.36, N = 3SE +/- 993.16, N = 4SE +/- 53.78, N = 3SE +/- 16.22, N = 3SE +/- 53.36, N = 310156410067859450541312134520275

PHP Benchmark Suite

Beacon RZ/G2M: The test run did not produce a result. The test run did not produce a result. The test run did not produce a result.

Beacon RZ/G2M-64: The test run did not produce a result. The test run did not produce a result. The test run did not produce a result.

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterBeacon RZ/G2MFirefly ROC-RK3328-CCBeacon RZ/G2M-64RPi Model 4 B 4GBRPi Model 4 B 2GBLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+0.00710.01420.02130.02840.0355SE +/- 0.00000986, N = 3SE +/- 0.00001338, N = 3SE +/- 0.00000701, N = 3SE +/- 0.00011281, N = 15SE +/- 0.00016552, N = 12SE +/- 0.00001867, N = 3SE +/- 0.00002723, N = 3SE +/- 0.00039106, N = 80.004798520.004914470.004952250.007784050.008260850.010916880.012298040.03173653

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests to stress the system's CPU. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: RotateBeacon RZ/G2MBeacon RZ/G2M-64ASUS Tinker BoardRPi Model 4 B 2GBRPi Model 4 B 4GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+20406080100SE +/- 0.88, N = 3SE +/- 0.87, N = 4SE +/- 0.75, N = 9SE +/- 0.67, N = 37570666463442416-ljbig -lwebp -lwebpmux -ltiff -ljpeg -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -lSM -lICE-pthread -lSM -lICE-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma1. (CC) gcc options: -fopenmp -O2 -lX11 -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: ResizingBeacon RZ/G2M-64Beacon RZ/G2MRPi Model 4 B 2GBASUS Tinker BoardRPi Model 4 B 4GBFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+1428425670SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.55, N = 11SE +/- 0.58, N = 56161535345362215-ljbig -lwebp -lwebpmux -ltiff -ljpeg -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -llzma-pthread -lSM -lICE-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -lSM -lICE-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma1. (CC) gcc options: -fopenmp -O2 -lX11 -lz -lm -lgomp -lpthread

SciMark

This test runs the ANSI C version of SciMark 2.0, which is a benchmark for scientific and numerical computing developed by programmers at the National Institute of Standards and Technology. This test is made up of Fast Foruier Transform, Jacobi Successive Over-relaxation, Monte Carlo, Sparse Matrix Multiply, and dense LU matrix factorization benchmarks. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: CompositeRPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardBeacon RZ/G2MBeacon RZ/G2M-64Firefly ROC-RK3328-CCRPi Model 3 B+Libre Board ALL-H3-CC H5306090120150SE +/- 0.87, N = 3SE +/- 1.27, N = 3SE +/- 0.06, N = 3SE +/- 0.06, N = 3SE +/- 0.16, N = 3SE +/- 0.01, N = 3SE +/- 0.11, N = 3SE +/- 0.02, N = 3143.02142.17141.72120.26120.1651.1348.8028.761. (CC) gcc options: -lm

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-09-25Performance / Cost - H.264 Video EncodingRPi Model 4 B 2GBFirefly ROC-RK3328-CCRPi Model 4 B 4GBASUS Tinker Board0.02480.04960.07440.09920.1240.110.070.060.051. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 4 B 4GB: $55 reported cost.4. ASUS Tinker Board: $71 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteRPi Model 4 B 2GBRPi Model 4 B 4GBFirefly ROC-RK3328-CCASUS Tinker BoardLibre Board ALL-H3-CC H5RPi Model 3 B+50010001500200025002237.291846.621546.60837.32609.86579.291. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. Libre Board ALL-H3-CC H5: $35 reported cost.6. RPi Model 3 B+: $35 reported cost.

NGINX Benchmark

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterNGINX Benchmark 1.9.9Performance / Cost - Static Web Page ServingRPi Model 4 B 2GBRPi Model 4 B 4GBRPi Model 3 B+ASUS Tinker Board306090120150113.4486.2957.4954.651. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. RPi Model 3 B+: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesRPi Model 4 B 2GBRPi Model 4 B 4GBFirefly ROC-RK3328-CCASUS Tinker BoardRPi Model 3 B+Libre Board ALL-H3-CC H5300K600K900K1200K1500K235485.00288695.00473970.00661152.001036315.001423905.001. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.6. Libre Board ALL-H3-CC H5: $35 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterFirefly ROC-RK3328-CCRPi Model 4 B 2GBLibre Board ALL-H3-CC H5RPi Model 4 B 4GBASUS Tinker BoardRPi Model 3 B+0.24980.49960.74940.99921.2490.170.370.380.430.871.111. Firefly ROC-RK3328-CC: $35 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 4 B 4GB: $55 reported cost.5. ASUS Tinker Board: $71 reported cost.6. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlRPi Model 4 B 2GBRPi Model 4 B 4GBFirefly ROC-RK3328-CCASUS Tinker BoardRPi Model 3 B+Libre Board ALL-H3-CC H52040608010027.9633.6646.0855.5689.7890.051. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.6. Libre Board ALL-H3-CC H5: $35 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3RPi Model 4 B 2GBRPi Model 4 B 4GBFirefly ROC-RK3328-CCASUS Tinker BoardLibre Board ALL-H3-CC H5RPi Model 3 B+5K10K15K20K25K5634.906893.7010340.4011531.1118147.1523058.701. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.5. Libre Board ALL-H3-CC H5: $35 reported cost.6. RPi Model 3 B+: $35 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACRPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+6K12K18K24K30K5016.606109.959602.7510112.2019824.0027217.751. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. ASUS Tinker Board: $71 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. Libre Board ALL-H3-CC H5: $35 reported cost.6. RPi Model 3 B+: $35 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Firefly ROC-RK3328-CCRPi Model 4 B 2GBLibre Board ALL-H3-CC H5RPi Model 4 B 4GBASUS Tinker BoardRPi Model 3 B+6K12K18K24K30K12015.8513119.7514074.5516031.4017038.5827545.351. Firefly ROC-RK3328-CC: $35 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 4 B 4GB: $55 reported cost.5. ASUS Tinker Board: $71 reported cost.6. RPi Model 3 B+: $35 reported cost.

Smallpt

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterSmallpt 1.0Performance / Cost - Global Illumination Renderer; 128 SamplesRPi Model 4 B 2GBFirefly ROC-RK3328-CCRPi Model 4 B 4GBLibre Board ALL-H3-CC H5ASUS Tinker BoardRPi Model 3 B+6K12K18K24K30K6547.508797.6014339.6014840.7019404.3026059.251. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 4 B 4GB: $55 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. ASUS Tinker Board: $71 reported cost.6. RPi Model 3 B+: $35 reported cost.

Rust Prime Benchmark

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterRust Prime BenchmarkPerformance / Cost - Prime Number Test To 200,000,000Firefly ROC-RK3328-CCRPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardRPi Model 3 B+20K40K60K80K100K4907.0029599.2060738.1574726.08108715.251. Firefly ROC-RK3328-CC: $35 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 4 B 4GB: $55 reported cost.4. ASUS Tinker Board: $71 reported cost.5. RPi Model 3 B+: $35 reported cost.

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: ResizingRPi Model 4 B 2GBFirefly ROC-RK3328-CCRPi Model 4 B 4GBASUS Tinker BoardLibre Board ALL-H3-CC H5RPi Model 3 B+0.26550.5310.79651.0621.32751.181.030.820.750.630.431. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 4 B 4GB: $55 reported cost.4. ASUS Tinker Board: $71 reported cost.5. Libre Board ALL-H3-CC H5: $35 reported cost.6. RPi Model 3 B+: $35 reported cost.

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: RotateRPi Model 4 B 2GBFirefly ROC-RK3328-CCRPi Model 4 B 4GBASUS Tinker BoardLibre Board ALL-H3-CC H5RPi Model 3 B+0.31950.6390.95851.2781.59751.421.261.150.930.690.461. RPi Model 4 B 2GB: $45 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 4 B 4GB: $55 reported cost.4. ASUS Tinker Board: $71 reported cost.5. Libre Board ALL-H3-CC H5: $35 reported cost.6. RPi Model 3 B+: $35 reported cost.

SciMark

OpenBenchmarking.orgMflops Per Dollar, More Is BetterSciMark 2.0Performance / Cost - Computational Test: CompositeRPi Model 4 B 2GBRPi Model 4 B 4GBASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+Libre Board ALL-H3-CC H50.71551.4312.14652.8623.57753.182.582.001.461.390.821. RPi Model 4 B 2GB: $45 reported cost.2. RPi Model 4 B 4GB: $55 reported cost.3. ASUS Tinker Board: $71 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. RPi Model 3 B+: $35 reported cost.6. Libre Board ALL-H3-CC H5: $35 reported cost.

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 28 June 2019 07:52 by user pi.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 1 July 2019 13:20 by user linaro.

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 2 July 2019 12:42 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 4 July 2019 11:05 by user firefly.

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 10:32 by user pi.

RPi Model 4 B 2GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 16GB SC16G, Graphics: V3D 4.2 2GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 20:46 by user pi.

Beacon RZ/G2M

Processor: ARMv8 Cortex-A53 @ 1.50GHz (2 Cores / 6 Threads), Motherboard: Beacon EmbeddedWorks RZ/G2M Development Kit, Memory: 4096MB, Disk: 64GB SD64G + 31GB DG4032, Graphics: DRM emulated, Monitor: LG HDR 4K

OS: Ubuntu 23.10, Kernel: 4.19.198-cip54-yocto-standard-gcf2469b18e55-dirty (aarch64), Compiler: GCC 13.2.0, File-System: ext4, Screen Resolution: 720x480

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-serialization=2 --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 3.11.6
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Vulnerable + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Vulnerable + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 27 November 2023 13:46 by user root.

Beacon RZ/G2M-64

Processor: ARMv8 Cortex-A53 @ 1.50GHz (2 Cores / 6 Threads), Motherboard: Beacon EmbeddedWorks RZ/G2M Development Kit, Memory: 4096MB, Disk: 64GB SD64G + 31GB DG4032, Graphics: DRM emulated, Monitor: LG HDR 4K

OS: Ubuntu 23.10, Kernel: 4.19.198-cip54-yocto-standard-gcf2469b18e55-dirty (aarch64), Compiler: GCC 13.2.0, File-System: ext4, Screen Resolution: 3840x2160

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-serialization=2 --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 3.11.6
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Vulnerable + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Vulnerable + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 27 November 2023 17:52 by user root.