Raspberry Pi Model 4 Benchmarks

ARMv7 rev 3 testing with a BCM2835 Raspberry Pi 4 Model B Rev 1.1 and V3D 4.2 2GB by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 2301231-NE-1907127HV04
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 7 Tests
CPU Massive 8 Tests
Creator Workloads 5 Tests
Encoding 3 Tests
Multi-Core 5 Tests
Programmer / Developer System Benchmarks 2 Tests
Server 3 Tests
Server CPU Tests 4 Tests
Single-Threaded 7 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
RPi Model 3 B+
June 28 2019
  12 Hours, 20 Minutes
ASUS Tinker Board
July 01 2019
  3 Hours, 39 Minutes
Libre Board ALL-H3-CC H5
July 02 2019
  3 Hours, 34 Minutes
Firefly ROC-RK3328-CC
July 04 2019
  2 Hours, 14 Minutes
RPi Model 4 B 4GB
July 11 2019
  4 Hours, 45 Minutes
RPi Model 4 B 2GB
July 11 2019
  2 Hours, 24 Minutes
tm8372tg
January 23 2023
  55 Minutes
Invert Hiding All Results Option
  4 Hours, 16 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

RPi Model 4 B 2GB

Changed Memory to 2048MB.

Changed Graphics to V3D 4.2 2GB.

tm8372tg

Processor: Intel Core i5 450M @ 2.40GHz (2 Cores / 4 Threads), Motherboard: Acer TravelMate 8372 (V1.10 BIOS), Chipset: Intel Core DRAM, Memory: 8GB, Disk: 250GB Western Digital WD2500BEVS-1, Graphics: Intel HD ILK 2GB, Audio: Conexant CX20585, Network: Broadcom NetXtreme BCM57760 PCIe + Broadcom BCM43225 802.11b/g/n

OS: Debian 11, Kernel: 6.0.0-4mx-amd64 (x86_64), Desktop: Xfce 4.18, Display Server: X Server 1.20.14, OpenGL: 2.1 Mesa 22.0.5, Compiler: GCC 10.2.1 20210110, File-System: ext4, Screen Resolution: 1366x768

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-mutex --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand (Boost: Enabled) - CPU Microcode: 0x7
Python Notes: Python 3.9.2
Security Notes: itlb_multihit: KVM: Mitigation of VMX disabled + l1tf: Mitigation of PTE Inversion; VMX: conditional cache flushes SMT vulnerable + mds: Vulnerable: Clear buffers attempted no microcode; SMT vulnerable + meltdown: Mitigation of PTI + mmio_stale_data: Unknown: No mitigations + retbleed: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Retpolines IBPB: conditional IBRS_FW STIBP: conditional RSB filling PBRSB-eIBRS: Not affected + srbds: Not affected + tsx_async_abort: Not affected

Raspberry Pi Model 4 BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDisplay ServerCompilerFile-SystemScreen ResolutionDesktopDisplay DriverOpenGLRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBtm8372tgARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3926MB32GB GB2MWBCM2708Raspbian 104.19.42-v7+ (armv7l)X Server 1.20.4GCC 8.3.0ext4656x416ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161024x768ARMv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H5Raspbian 9.64.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CCUbuntu 18.044.4.114 (aarch64)X Server 1.18.4GCC 7.4.01024x768ARMv7 rev 3 @ 1.50GHz (4 Cores)BCM2835 Raspberry Pi 4 Model B Rev 1.14096MB16GB SC16GV3D 4.2 4GBDELL P2415QRaspbian 104.19.50-v7l+ (armv7l)LXDE 0.10.0X Server 1.20.4modesetting 1.20.42.1 Mesa 19.1.0-develGCC 8.3.02048MBV3D 4.2 2GBIntel Core i5 450M @ 2.40GHz (2 Cores / 4 Threads)Acer TravelMate 8372 (V1.10 BIOS)Intel Core DRAM8GB250GB Western Digital WD2500BEVS-1Intel HD ILK 2GBConexant CX20585Broadcom NetXtreme BCM57760 PCIe + Broadcom BCM43225 802.11b/g/nDebian 116.0.0-4mx-amd64 (x86_64)Xfce 4.18X Server 1.20.142.1 Mesa 22.0.5GCC 10.2.1 202101101366x768OpenBenchmarking.orgCompiler Details- RPi Model 3 B+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Libre Board ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v - RPi Model 4 B 4GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - RPi Model 4 B 2GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - tm8372tg: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-mutex --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v Processor Details- RPi Model 3 B+: Scaling Governor: BCM2835 Freq ondemand- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- RPi Model 4 B 4GB: Scaling Governor: BCM2835 Freq ondemand- RPi Model 4 B 2GB: Scaling Governor: BCM2835 Freq ondemand- tm8372tg: Scaling Governor: acpi-cpufreq ondemand (Boost: Enabled) - CPU Microcode: 0x7Python Details- RPi Model 3 B+: Python 2.7.16 + Python 3.7.3- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Libre Board ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.7- RPi Model 4 B 4GB: Python 2.7.16 + Python 3.7.3- RPi Model 4 B 2GB: Python 2.7.16 + Python 3.7.3- tm8372tg: Python 3.9.2Kernel Details- tm8372tg: Transparent Huge Pages: alwaysSecurity Details- tm8372tg: itlb_multihit: KVM: Mitigation of VMX disabled + l1tf: Mitigation of PTE Inversion; VMX: conditional cache flushes SMT vulnerable + mds: Vulnerable: Clear buffers attempted no microcode; SMT vulnerable + meltdown: Mitigation of PTI + mmio_stale_data: Unknown: No mitigations + retbleed: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Retpolines IBPB: conditional IBRS_FW STIBP: conditional RSB filling PBRSB-eIBRS: Not affected + srbds: Not affected + tsx_async_abort: Not affected

RPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBtm8372tgLogarithmic Result OverviewPhoronix Test SuiteLAME MP3 EncodingPerl BenchmarksSciMarkGraphicsMagickSmallptFLAC Audio EncodingZstd CompressionPyBenchPHPBench

Raspberry Pi Model 4 Benchmarksx264: H.264 Video Encodingrust-prime: Prime Number Test To 200,000,000nginx: Static Web Page Servingencode-flac: WAV To FLACcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19pybench: Total For Average Test Timessmallpt: Global Illumination Renderer; 128 Samplesperl-benchmark: Pod2htmlencode-mp3: WAV To MP3phpbench: PHP Benchmark Suiteperl-benchmark: Interpretergraphics-magick: Rotategraphics-magick: Resizingscimark2: CompositeRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBtm8372tg0.143106.152012.06777.65787.0129609744.552.56511278658.82202750.03173653161548.803.321052.483880.15135.25239.989312273.300.78254268162.41594500.012298046653141.72566.40402.1340683424.022.57273250518.49213450.01091688242228.762.31140.20288.92343.3113542251.361.31659761295.44541310.00491447443651.133.101104.334745.75111.09291.485249260.720.61207402125.341015640.007784056345142.174.91657.765104.85111.48291.555233145.500.62136299125.221006780.008260856453143.028216.2322.793219.4262326119.6250.3261313467.2223136750.0030452912587257.49OpenBenchmarking.org

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-09-25H.264 Video EncodingRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Firefly ROC-RK3328-CCASUS Tinker Board1.10482.20963.31444.41925.524SE +/- 0.08, N = 12SE +/- 0.06, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.06, N = 123.104.910.142.313.321. (CC) gcc options: -ldl -lm -lpthread

H.264 Video Encoding

tm8372tg: The test quit with a non-zero exit status. The test quit with a non-zero exit status. The test quit with a non-zero exit status. E: ./x264: 2: ./x264_/bin/x264: not found

Rust Prime Benchmark

Based on petehunt/rust-benchmark, this is a prime number benchmark that is multi-threaded and written in Rustlang. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterRust Prime BenchmarkPrime Number Test To 200,000,000RPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Firefly ROC-RK3328-CCASUS Tinker Board7001400210028003500SE +/- 3.97, N = 3SE +/- 0.03, N = 3SE +/- 18.94, N = 3SE +/- 0.21, N = 3SE +/- 5.80, N = 31104.33657.763106.15140.201052.48-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil1. (CC) gcc options: -pie -nodefaultlibs

Prime Number Test To 200,000,000

tm8372tg: The test quit with a non-zero exit status. The test quit with a non-zero exit status. The test quit with a non-zero exit status. E: ./rust-prime: 3: ./prime_rust: not found

NGINX Benchmark

This is a test of ab, which is the Apache Benchmark program running against nginx. This test profile measures how many requests per second a given system can sustain when carrying out 2,000,000 requests with 500 requests being carried out concurrently. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterNGINX Benchmark 1.9.9Static Web Page Servingtm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+ASUS Tinker Board2K4K6K8K10KSE +/- 18.80, N = 3SE +/- 48.94, N = 9SE +/- 4.09, N = 3SE +/- 7.80, N = 3SE +/- 35.02, N = 38216.234745.755104.852012.063880.15-lcrypto-lcrypto-lcrypto-lcrypto1. (CC) gcc options: -lpthread -lcrypt -lz -O3 -march=native

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACtm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board2004006008001000SE +/- 0.09, N = 5SE +/- 0.69, N = 25SE +/- 0.35, N = 5SE +/- 3.13, N = 5SE +/- 0.71, N = 5SE +/- 0.88, N = 5SE +/- 2.04, N = 522.79111.09111.48777.65566.40288.92135.25-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19tm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board2004006008001000SE +/- 0.62, N = 3SE +/- 2.54, N = 3SE +/- 1.74, N = 3SE +/- 1.73, N = 3SE +/- 7.90, N = 3SE +/- 0.30, N = 3SE +/- 0.46, N = 3219.43291.48291.55787.01402.13343.31239.98-pthread -lz-pthread -lz-pthread -lz -llzma-pthread -lz -llzma-pthread -lz -llzma-pthread -lz -llzma1. (CC) gcc options: -O3

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test Timestm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board9K18K27K36K45KSE +/- 2.33, N = 3SE +/- 6.93, N = 3SE +/- 10.37, N = 3SE +/- 81.94, N = 3SE +/- 186.40, N = 3SE +/- 15.60, N = 3SE +/- 24.84, N = 32326524952332960940683135429312

Smallpt

Smallpt is a C++ global illumination renderer written in less than 100 lines of code. Global illumination is done via unbiased Monte Carlo path tracing and there is multi-threading support via the OpenMP library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 128 Samplestm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board160320480640800SE +/- 0.21, N = 3SE +/- 3.41, N = 3SE +/- 1.73, N = 6SE +/- 0.52, N = 3SE +/- 0.66, N = 3SE +/- 1.61, N = 3SE +/- 1.48, N = 3119.63260.72145.50744.55424.02251.36273.301. (CXX) g++ options: -fopenmp -O3

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmltm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.57891.15781.73672.31562.8945SE +/- 0.00146084, N = 3SE +/- 0.00287922, N = 3SE +/- 0.00462631, N = 3SE +/- 0.04479638, N = 9SE +/- 0.00916360, N = 3SE +/- 0.01503227, N = 3SE +/- 0.00901113, N = 30.326131340.612074020.621362992.565112782.572732501.316597610.78254268

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3tm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board140280420560700SE +/- 0.04, N = 3SE +/- 0.05, N = 3SE +/- 0.10, N = 3SE +/- 9.15, N = 3SE +/- 0.09, N = 3SE +/- 0.43, N = 3SE +/- 0.53, N = 367.22125.34125.22658.82518.49295.44162.411. (CC) gcc options: -lm

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark Suitetm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board70K140K210K280K350KSE +/- 1535.80, N = 3SE +/- 239.15, N = 3SE +/- 519.36, N = 3SE +/- 53.36, N = 3SE +/- 16.22, N = 3SE +/- 53.78, N = 3SE +/- 993.16, N = 431367510156410067820275213455413159450

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Interpretertm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.00710.01420.02130.02840.0355SE +/- 0.00001812, N = 3SE +/- 0.00011281, N = 15SE +/- 0.00016552, N = 12SE +/- 0.00039106, N = 8SE +/- 0.00001867, N = 3SE +/- 0.00001338, N = 3SE +/- 0.00002723, N = 30.003045290.007784050.008260850.031736530.010916880.004914470.01229804

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests to stress the system's CPU. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: Rotatetm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board306090120150SE +/- 0.58, N = 3SE +/- 0.67, N = 3SE +/- 0.75, N = 9125636416244466-lXext -lSM -lICE-lSM -lICE-lSM -lICE-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lX11 -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: Resizingtm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board20406080100SE +/- 0.58, N = 5SE +/- 0.55, N = 1187455315223653-lXext -lSM -lICE-lSM -lICE-lSM -lICE-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lX11 -lz -lm -lgomp -lpthread

SciMark

This test runs the ANSI C version of SciMark 2.0, which is a benchmark for scientific and numerical computing developed by programmers at the National Institute of Standards and Technology. This test is made up of Fast Foruier Transform, Jacobi Successive Over-relaxation, Monte Carlo, Sparse Matrix Multiply, and dense LU matrix factorization benchmarks. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Compositetm8372tgRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board60120180240300SE +/- 3.15, N = 4SE +/- 1.27, N = 3SE +/- 0.87, N = 3SE +/- 0.11, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3257.49142.17143.0248.8028.7651.13141.721. (CC) gcc options: -lm

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-09-25Performance / Cost - H.264 Video EncodingRPi Model 4 B 4GBRPi Model 4 B 2GBFirefly ROC-RK3328-CCASUS Tinker Board0.02480.04960.07440.09920.1240.060.110.070.051. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board50010001500200025001846.622237.29579.29609.861546.60837.321. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

NGINX Benchmark

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterNGINX Benchmark 1.9.9Performance / Cost - Static Web Page ServingRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+ASUS Tinker Board30609012015086.29113.4457.4954.651. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. ASUS Tinker Board: $71 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board300K600K900K1200K1500K288695.00235485.001036315.001423905.00473970.00661152.001. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.24980.49960.74940.99921.2490.430.371.110.380.170.871. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board2040608010033.6627.9689.7890.0546.0855.561. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3RPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board5K10K15K20K25K6893.705634.9023058.7018147.1510340.4011531.111. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board6K12K18K24K30K6109.955016.6027217.7519824.0010112.209602.751. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19RPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board6K12K18K24K30K16031.4013119.7527545.3514074.5512015.8517038.581. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

Smallpt

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterSmallpt 1.0Performance / Cost - Global Illumination Renderer; 128 SamplesRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board6K12K18K24K30K14339.606547.5026059.2514840.708797.6019404.301. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

Rust Prime Benchmark

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterRust Prime BenchmarkPerformance / Cost - Prime Number Test To 200,000,000RPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Firefly ROC-RK3328-CCASUS Tinker Board20K40K60K80K100K60738.1529599.20108715.254907.0074726.081. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. ASUS Tinker Board: $71 reported cost.

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: ResizingRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.26550.5310.79651.0621.32750.821.180.430.631.030.751. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: RotateRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.31950.6390.95851.2781.59751.151.420.460.691.260.931. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

SciMark

OpenBenchmarking.orgMflops Per Dollar, More Is BetterSciMark 2.0Performance / Cost - Computational Test: CompositeRPi Model 4 B 4GBRPi Model 4 B 2GBRPi Model 3 B+Libre Board ALL-H3-CC H5Firefly ROC-RK3328-CCASUS Tinker Board0.71551.4312.14652.8623.57752.583.181.390.821.462.001. RPi Model 4 B 4GB: $55 reported cost.2. RPi Model 4 B 2GB: $45 reported cost.3. RPi Model 3 B+: $35 reported cost.4. Libre Board ALL-H3-CC H5: $35 reported cost.5. Firefly ROC-RK3328-CC: $35 reported cost.6. ASUS Tinker Board: $71 reported cost.

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 28 June 2019 07:52 by user pi.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 1 July 2019 13:20 by user linaro.

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 2 July 2019 12:42 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 4 July 2019 11:05 by user firefly.

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 10:32 by user pi.

RPi Model 4 B 2GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 16GB SC16G, Graphics: V3D 4.2 2GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 20:46 by user pi.

tm8372tg

Processor: Intel Core i5 450M @ 2.40GHz (2 Cores / 4 Threads), Motherboard: Acer TravelMate 8372 (V1.10 BIOS), Chipset: Intel Core DRAM, Memory: 8GB, Disk: 250GB Western Digital WD2500BEVS-1, Graphics: Intel HD ILK 2GB, Audio: Conexant CX20585, Network: Broadcom NetXtreme BCM57760 PCIe + Broadcom BCM43225 802.11b/g/n

OS: Debian 11, Kernel: 6.0.0-4mx-amd64 (x86_64), Desktop: Xfce 4.18, Display Server: X Server 1.20.14, OpenGL: 2.1 Mesa 22.0.5, Compiler: GCC 10.2.1 20210110, File-System: ext4, Screen Resolution: 1366x768

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-link-mutex --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-10-Km9U7s/gcc-10-10.2.1/debian/tmp-gcn/usr,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-build-config=bootstrap-lto-lean --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand (Boost: Enabled) - CPU Microcode: 0x7
Python Notes: Python 3.9.2
Security Notes: itlb_multihit: KVM: Mitigation of VMX disabled + l1tf: Mitigation of PTE Inversion; VMX: conditional cache flushes SMT vulnerable + mds: Vulnerable: Clear buffers attempted no microcode; SMT vulnerable + meltdown: Mitigation of PTI + mmio_stale_data: Unknown: No mitigations + retbleed: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Retpolines IBPB: conditional IBRS_FW STIBP: conditional RSB filling PBRSB-eIBRS: Not affected + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 23 January 2023 18:00 by user connor.