SSD February 2019

Samsung SM961 256GB

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1902173-SP-1902157SP22
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Disable Color Branding
Prefer Vertical Bar Graphs
No Box Plots
On Line Graphs With Missing Data, Connect The Line Gaps

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable
Show Perf Per RAM Channel Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Intel 600p 512GB
February 12 2019
  3 Hours, 11 Minutes
Intel DC P3600 800GB
February 13 2019
  2 Hours, 19 Minutes
Intel Optane 900p 280GB
February 13 2019
  2 Hours, 15 Minutes
Samsung 850 PRO 256GB
February 12 2019
  9 Hours, 59 Minutes
Samsung 970 EVO 250GB
February 12 2019
  2 Hours, 32 Minutes
Samsung 970 EVO 500GB
February 11 2019
  3 Hours, 33 Minutes
Samsung 970 EVO Plus 500GB
February 15 2019
  1 Hour, 55 Minutes
Samsung 970 PRO 512GB
February 12 2019
  1 Hour, 46 Minutes
Samsung SM961 256GB
February 16 2019
  2 Hours, 8 Minutes
Invert Behavior (Only Show Selected Data)
  3 Hours, 17 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Intel 600p 512GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: 512GB INTEL SSDPEKNW512G8, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Intel DC P3600 800GB

Changed Disk to 800GB INTEL SSDPE2ME800G4.

Intel Optane 900p 280GB

Changed Disk to 280GB INTEL SSDPE21D280GA.

Disk Change: NONE / relatime,rw,stripe=256

Samsung 850 PRO 256GB

Changed Disk to 256GB Samsung SSD 850.

Disk Change: MQ-DEADLINE / relatime,rw,stripe=8191

Samsung 970 EVO 250GB

Changed Disk to Samsung SSD 970 EVO 250GB.

Samsung 970 EVO 500GB

Changed Disk to Samsung SSD 970 EVO 500GB.

Disk Change: NONE / errors=remount-ro,relatime,rw

Samsung 970 EVO Plus 500GB

Changed Disk to Samsung SSD 970 EVO Plus 500GB.

Samsung 970 PRO 512GB

Changed Disk to Samsung SSD 970 PRO 512GB.

Samsung SM961 256GB

Processor: Intel Core i5-8259U @ 3.80GHz (4 Cores / 8 Threads), Motherboard: Intel NUC8BEB (BECFL357.86A.0056.2018.1128.1717 BIOS), Chipset: Intel Cannon Point-LP Shared SRAM, Memory: 2 x 4096 MB DDR4-2400MT/s PSD44G240041S, Disk: 256GB SAMSUNG MZVPW256HEGL-00000 + 160GB INTEL SSDSA2BW16, Graphics: Intel HD 3GB (1050MHz), Audio: Realtek ALC233, Monitor: Acer E211H, Network: Intel I219-V + Intel Cannon Point-LP CNVi

OS: Fedora 29, Kernel: 4.20.7-200.fc29.x86_64 (x86_64), Desktop: Xfce 4.12, Display Server: X Server 1.20.3, Display Driver: modesetting 1.20.3, OpenGL: 4.5 Mesa 18.2.8, Compiler: GCC 8.2.1 20181215, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-redhat-linux --disable-libunwind-exceptions --enable-__cxa_atexit --enable-bootstrap --enable-cet --enable-checking=release --enable-gnu-indirect-function --enable-gnu-unique-object --enable-initfini-array --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,lto --enable-libmpx --enable-multilib --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --mandir=/usr/share/man --with-arch_32=i686 --with-gcc-major-version-only --with-isl --with-linker-hash-style=gnu --with-tune=generic --without-cuda-driver
Disk Notes: NONE / relatime,rw,seclabel
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15 + Python 3.7.2
Security Notes: SELinux + KPTI + __user pointer sanitization + Full generic retpoline IBPB: conditional IBRS_FW STIBP: conditional RSB filling + SSB disabled via prctl and seccomp + PTE Inversion; VMX: conditional cache flushes SMT vulnerable

SSD February 2019ProcessorMotherboardChipsetMemoryDiskGraphicsAudioNetworkMonitorOSKernelDesktopDisplay ServerDisplay DriverOpenGLCompilerFile-SystemScreen ResolutionIntel 600p 512GBIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 850 PRO 256GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung SM961 256GBAMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads)ASUS ROG ZENITH EXTREME (1601 BIOS)AMD Family 17h4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX512GB INTEL SSDPEKNW512G8llvmpipeRealtek ALC1220Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11adUbuntu 18.045.0.0-050000rc6-generic (x86_64) 20190210GNOME Shell 3.28.3X Server 1.19.6modesetting 1.19.63.3 Mesa 18.0.5 (LLVM 6.0 128 bits)GCC 7.3.0ext41280x1024800GB INTEL SSDPE2ME800G4280GB INTEL SSDPE21D280GA256GB Samsung SSD 850Samsung SSD 970 EVO 250GBSamsung SSD 970 EVO 500GBSamsung SSD 970 EVO Plus 500GBSamsung SSD 970 PRO 512GBIntel Core i5-8259U @ 3.80GHz (4 Cores / 8 Threads)Intel NUC8BEB (BECFL357.86A.0056.2018.1128.1717 BIOS)Intel Cannon Point-LP Shared SRAM2 x 4096 MB DDR4-2400MT/s PSD44G240041S256GB SAMSUNG MZVPW256HEGL-00000 + 160GB INTEL SSDSA2BW16Intel HD 3GB (1050MHz)Realtek ALC233Acer E211HIntel I219-V + Intel Cannon Point-LP CNViFedora 294.20.7-200.fc29.x86_64 (x86_64)Xfce 4.12X Server 1.20.3modesetting 1.20.34.5 Mesa 18.2.8GCC 8.2.1 201812151920x1080OpenBenchmarking.orgCompiler Details- Intel 600p 512GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Intel DC P3600 800GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Intel Optane 900p 280GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung 850 PRO 256GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung 970 EVO 250GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung 970 EVO 500GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung 970 EVO Plus 500GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung 970 PRO 512GB: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Samsung SM961 256GB: --build=x86_64-redhat-linux --disable-libunwind-exceptions --enable-__cxa_atexit --enable-bootstrap --enable-cet --enable-checking=release --enable-gnu-indirect-function --enable-gnu-unique-object --enable-initfini-array --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,lto --enable-libmpx --enable-multilib --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --mandir=/usr/share/man --with-arch_32=i686 --with-gcc-major-version-only --with-isl --with-linker-hash-style=gnu --with-tune=generic --without-cuda-driver Disk Details- Intel 600p 512GB: NONE / relatime,rw- Intel DC P3600 800GB: NONE / relatime,rw- Intel Optane 900p 280GB: NONE / relatime,rw,stripe=256- Samsung 850 PRO 256GB: MQ-DEADLINE / relatime,rw,stripe=8191- Samsung 970 EVO 250GB: NONE / relatime,rw- Samsung 970 EVO 500GB: NONE / errors=remount-ro,relatime,rw- Samsung 970 EVO Plus 500GB: NONE / relatime,rw- Samsung 970 PRO 512GB: NONE / relatime,rw- Samsung SM961 256GB: NONE / relatime,rw,seclabelProcessor Details- Intel 600p 512GB: Scaling Governor: acpi-cpufreq ondemand- Intel DC P3600 800GB: Scaling Governor: acpi-cpufreq ondemand- Intel Optane 900p 280GB: Scaling Governor: acpi-cpufreq ondemand- Samsung 850 PRO 256GB: Scaling Governor: acpi-cpufreq ondemand- Samsung 970 EVO 250GB: Scaling Governor: acpi-cpufreq ondemand- Samsung 970 EVO 500GB: Scaling Governor: acpi-cpufreq ondemand- Samsung 970 EVO Plus 500GB: Scaling Governor: acpi-cpufreq ondemand- Samsung 970 PRO 512GB: Scaling Governor: acpi-cpufreq ondemand- Samsung SM961 256GB: Scaling Governor: intel_pstate powersavePython Details- Intel 600p 512GB: Python 2.7.15rc1 + Python 3.6.7- Intel DC P3600 800GB: Python 2.7.15rc1 + Python 3.6.7- Intel Optane 900p 280GB: Python 2.7.15rc1 + Python 3.6.7- Samsung 850 PRO 256GB: Python 2.7.15rc1 + Python 3.6.7- Samsung 970 EVO 250GB: Python 2.7.15rc1 + Python 3.6.7- Samsung 970 EVO 500GB: Python 2.7.15rc1 + Python 3.6.7- Samsung 970 EVO Plus 500GB: Python 2.7.15rc1 + Python 3.6.7- Samsung 970 PRO 512GB: Python 2.7.15rc1 + Python 3.6.7- Samsung SM961 256GB: Python 2.7.15 + Python 3.7.2Security Details- Intel 600p 512GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Intel DC P3600 800GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Intel Optane 900p 280GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung 850 PRO 256GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung 970 EVO 250GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung 970 EVO 500GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung 970 EVO Plus 500GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung 970 PRO 512GB: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp- Samsung SM961 256GB: SELinux + KPTI + __user pointer sanitization + Full generic retpoline IBPB: conditional IBRS_FW STIBP: conditional RSB filling + SSB disabled via prctl and seccomp + PTE Inversion; VMX: conditional cache flushes SMT vulnerable

Intel 600p 512GBIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 850 PRO 256GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung SM961 256GBLogarithmic Result OverviewPhoronix Test SuiteFlexible IO TesterSQLiteIOzoneFS-MarkPostgreSQL pgbenchApplication Start-up TimeCompile Bench

SSD February 2019fio: Seq Read - Linux AIO - No - Yes - 2MB - Default Test Directorystartup-time: Only Seq Reads - GNOME Terminal - Default Test Directorystartup-time: Only Seq Reads - LibreOffice Writer - Default Test Directoryfio: Rand Write - Linux AIO - No - Yes - 2MB - Default Test Directoryfio: Rand Read - Linux AIO - No - Yes - 2MB - Default Test Directorysqlite: Timed SQLite Insertionsfio: Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfs-mark: 4000 Files, 32 Sub Dirs, 1MB Sizefs-mark: 1000 Files, 1MB Sizestartup-time: Seq Reads + Writes - GNOME Terminal - Default Test Directorypgbench: Mostly RAM - Normal Load - Read Writefio: Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Seq Write - Linux AIO - No - Yes - 2MB - Default Test Directoryblogbench: Writecompilebench: Compileiozone: 1MB - 8GB - Write Performancestartup-time: Seq Reads + Writes - LibreOffice Writer - Default Test Directorystartup-time: Only Seq Reads - xterm - Default Test DirectoryIntel 600p 512GBIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 850 PRO 256GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung SM961 256GB2363.162.33943160814.57321822003603502.519682133338339431316514742352.030.7318921.351.1689023792.361005257333707.47650.932.8319678156364610874463601895744.282.600.3523342.071.40130223382.351081276667583.66594.773.621924711300044212782382620411071.032.080.535078.286.1749.6453150.603749583325.4025.9155.1412921485058.081934505132736.6039.811.895574.624.041464329237.094201080002192213.88400024933397414641672416883693.130.9310312.361.992372335436.157021796671262313.22495924966797623993068719376433.030.619121.501.233110341333.59723185333243.70244.072.8365132426679473134375632056924.362.160.3613810.980.862228341343.847521920001971973.227595252000984223454241203715352.350.2516481.501.2314552714117.57113529033394.57954.552316252667987148013951342.373.390.38OpenBenchmarking.org

Flexible IO Tester

Fio is an advanced disk benchmark that depends upon the kernel's AIO access library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryIntel Optane 900p 280GBIntel DC P3600 800GBSamsung SM961 256GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 850 PRO 256GBIntel 600p 512GB5001000150020002500SE +/- 0.33, N = 3SE +/- 15.50, N = 3SE +/- 1.00, N = 323341892164813811031912557507236-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

Application Start-up Time

This benchmark measures the start-up time of applications when there is some I/O in the background. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: GNOME Terminal - Disk Target: Default Test DirectorySamsung 970 PRO 512GBIntel DC P3600 800GBSamsung 970 EVO Plus 500GBSamsung SM961 256GBIntel Optane 900p 280GBSamsung 970 EVO 500GBIntel 600p 512GBSamsung 970 EVO 250GBSamsung 850 PRO 256GB246810SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.04, N = 3SE +/- 0.05, N = 30.981.351.501.502.072.363.164.628.28

OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectorySamsung 970 PRO 512GBIntel DC P3600 800GBSamsung 970 EVO Plus 500GBSamsung SM961 256GBIntel Optane 900p 280GBSamsung 970 EVO 500GBIntel 600p 512GBSamsung 970 EVO 250GBSamsung 850 PRO 256GB246810SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 9SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 30.861.161.231.231.401.992.334.046.17

Flexible IO Tester

Fio is an advanced disk benchmark that depends upon the kernel's AIO access library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBSamsung 970 EVO 250GBSamsung SM961 256GBIntel Optane 900p 280GBIntel 600p 512GBIntel DC P3600 800GBSamsung 850 PRO 256GB7001400210028003500SE +/- 0.58, N = 3SE +/- 1.45, N = 3SE +/- 2.65, N = 3SE +/- 0.33, N = 3SE +/- 2.52, N = 3SE +/- 6.44, N = 3SE +/- 0.33, N = 3SE +/- 3.76, N = 93110.002372.002228.001464.001455.001302.00943.00890.0049.64-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 PRO 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung SM961 256GBIntel DC P3600 800GBIntel Optane 900p 280GBIntel 600p 512GBSamsung 850 PRO 256GB7001400210028003500SE +/- 11.00, N = 3SE +/- 12.17, N = 3SE +/- 2.89, N = 334133413335432922714237923381608531-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

OpenBenchmarking.orgIOPS Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB50010001500200025002524.891866.811468.721099.72418.531. Samsung 970 EVO 250GB: $98.75 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB36912159.867.295.744.291.641. Samsung 970 EVO 250GB: $98.75 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

SQLite

This is a simple benchmark of SQLite. At present this test profile just measures the time to perform a pre-defined number of insertions on an indexed database. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSQLite 3.22Timed SQLite InsertionsIntel Optane 900p 280GBIntel DC P3600 800GBIntel 600p 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 970 PRO 512GBSamsung 850 PRO 256GBSamsung SM961 256GB306090120150SE +/- 0.02, N = 3SE +/- 0.00, N = 3SE +/- 0.18, N = 3SE +/- 0.07, N = 3SE +/- 0.06, N = 3SE +/- 0.12, N = 3SE +/- 0.05, N = 3SE +/- 0.62, N = 12SE +/- 0.06, N = 32.352.3614.5733.5936.1537.0943.8450.60117.57-lz-lz-lz-lz-lz1. (CC) gcc options: -O2 -ldl -lpthread

Flexible IO Tester

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Sequential Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB61218243024.1114.8314.119.754.731. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB61218243023.9214.8313.959.724.821. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB81624324033.3426.2619.7314.898.661. Samsung 970 EVO 250GB: $98.75 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung SM961 256GBIntel Optane 900p 280GBIntel DC P3600 800GBSamsung 970 PRO 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 850 PRO 256GBIntel 600p 512GB2004006008001000SE +/- 5.21, N = 3SE +/- 2.40, N = 3SE +/- 10.50, N = 3SE +/- 2.03, N = 3SE +/- 2.52, N = 3SE +/- 1.53, N = 3SE +/- 0.33, N = 3113510811005752723702420374321-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

OpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung SM961 256GBIntel Optane 900p 280GBIntel DC P3600 800GBSamsung 970 PRO 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 850 PRO 256GBIntel 600p 512GB60K120K180K240K300KSE +/- 1452.97, N = 3SE +/- 666.67, N = 3SE +/- 2666.67, N = 3SE +/- 577.35, N = 3SE +/- 666.67, N = 3SE +/- 333.33, N = 3SE +/- 66.67, N = 32903332766672573331920001853331796671080009583382200-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

BlogBench

OpenBenchmarking.orgFinal Score Per Dollar, More Is BetterBlogBench 1.1Performance / Cost - Test: WriteSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBIntel Optane 900p 280GB60120180240300288.97236.71180.52169.3688.251. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 PRO 512GB: $229.15 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 EVO 250GB: $98.75 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

Application Start-up Time

OpenBenchmarking.orgsec x Dollar, Fewer Is BetterApplication Start-up Time 2.4.0Performance / Cost - Background I/O Mix: Only Sequential Reads - Application To Start: xterm - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBIntel Optane 900p 280GB30609012015046.8057.2991.84103.69143.091. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 PRO 512GB: $229.15 reported cost.3. Samsung 970 EVO 250GB: $98.75 reported cost.4. Samsung 970 EVO 500GB: $169.99 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

FS-Mark

OpenBenchmarking.orgFiles/s Per Dollar, More Is BetterFS-Mark 3.3Performance / Cost - Test: 4000 Files, 32 Sub Dirs, 1MB SizeSamsung 970 EVO 250GBIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung 970 EVO 500GB0.49950.9991.49851.9982.49752.222.161.870.860.741. Samsung 970 EVO 250GB: $98.75 reported cost.2. Intel Optane 900p 280GB: $269.99 reported cost.3. Samsung 970 EVO Plus 500GB: $129.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Samsung 970 EVO 500GB: $169.99 reported cost.

OpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 4000 Files, 32 Sub Dirs, 1MB SizeIntel DC P3600 800GBIntel Optane 900p 280GBIntel 600p 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung SM961 256GBSamsung 850 PRO 256GB150300450600750SE +/- 3.10, N = 3SE +/- 6.45, N = 10SE +/- 2.15, N = 3SE +/- 0.85, N = 3SE +/- 0.15, N = 3SE +/- 0.81, N = 3SE +/- 7.53, N = 12SE +/- 0.03, N = 3SE +/- 0.30, N = 3707.47583.66360.00243.70219.00197.00126.0094.5725.401. (CC) gcc options: -static

OpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 1000 Files, 1MB SizeIntel DC P3600 800GBIntel Optane 900p 280GBIntel 600p 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 970 PRO 512GBSamsung SM961 256GBSamsung 850 PRO 256GB140280420560700SE +/- 6.59, N = 12SE +/- 3.26, N = 3SE +/- 3.16, N = 3SE +/- 1.62, N = 3SE +/- 1.87, N = 3SE +/- 0.67, N = 3SE +/- 0.46, N = 3SE +/- 0.33, N = 3SE +/- 0.51, N = 12650.93594.77350.00244.07231.00221.00197.0095.0025.911. (CC) gcc options: -static

Application Start-up Time

This benchmark measures the start-up time of applications when there is some I/O in the background. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: GNOME Terminal - Disk Target: Default Test DirectoryIntel 600p 512GBIntel DC P3600 800GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GBSamsung 970 EVO 250GBSamsung SM961 256GBSamsung 850 PRO 256GB1224364860SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.04, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.20, N = 9SE +/- 0.02, N = 3SE +/- 0.07, N = 9SE +/- 1.25, N = 92.512.832.833.223.223.623.884.5555.14

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Mostly RAM - Test: Normal Load - Mode: Read WriteIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 970 PRO 512GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung SM961 256GBSamsung 850 PRO 256GBIntel 600p 512GB4K8K12K16K20KSE +/- 52.60, N = 3SE +/- 94.10, N = 3SE +/- 164.86, N = 3SE +/- 86.63, N = 3SE +/- 316.84, N = 6SE +/- 34.53, N = 3SE +/- 4.56, N = 3SE +/- 10.27, N = 319678192477595651349594000231612929681. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Application Start-up Time

OpenBenchmarking.orgsec x Dollar, Fewer Is BetterApplication Start-up Time 2.4.0Performance / Cost - Background I/O Mix: Only Sequential Reads - Application To Start: GNOME Terminal - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBIntel Optane 900p 280GB120240360480600194.99224.57401.18456.23558.881. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 PRO 512GB: $229.15 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 EVO 250GB: $98.75 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

OpenBenchmarking.orgsec x Dollar, Fewer Is BetterApplication Start-up Time 2.4.0Performance / Cost - Background I/O Mix: Sequential Reads + Writes - Application To Start: GNOME Terminal - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB2004006008001000367.87383.15547.37737.86977.361. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

FS-Mark

OpenBenchmarking.orgFiles/s Per Dollar, More Is BetterFS-Mark 3.3Performance / Cost - Test: 1000 Files, 1MB SizeSamsung 970 EVO 250GBIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GB0.5041.0081.5122.0162.522.242.201.881.360.861. Samsung 970 EVO 250GB: $98.75 reported cost.2. Intel Optane 900p 280GB: $269.99 reported cost.3. Samsung 970 EVO Plus 500GB: $129.99 reported cost.4. Samsung 970 EVO 500GB: $169.99 reported cost.5. Samsung 970 PRO 512GB: $229.15 reported cost.

Application Start-up Time

OpenBenchmarking.orgsec x Dollar, Fewer Is BetterApplication Start-up Time 2.4.0Performance / Cost - Background I/O Mix: Only Sequential Reads - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBIntel Optane 900p 280GBSamsung 970 EVO 250GB90180270360450159.89197.07338.28377.99398.951. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 PRO 512GB: $229.15 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Intel Optane 900p 280GB: $269.99 reported cost.5. Samsung 970 EVO 250GB: $98.75 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Mostly RAM - Test: Normal Load - Mode: Read WriteIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 PRO 512GBSamsung 970 EVO 500GB163248648071.2950.1040.5133.1429.171. Intel Optane 900p 280GB: $269.99 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 250GB: $98.75 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Samsung 970 EVO 500GB: $169.99 reported cost.

Compile Bench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterCompile Bench 0.6Performance / Cost - Test: CompileSamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB4812162017.0915.8211.398.897.561. Samsung 970 EVO 250GB: $98.75 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

Application Start-up Time

OpenBenchmarking.orgsec x Dollar, Fewer Is BetterApplication Start-up Time 2.4.0Performance / Cost - Background I/O Mix: Sequential Reads + Writes - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GB120240360480600280.78309.09515.07538.50561.581. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Intel Optane 900p 280GB: $269.99 reported cost.

Flexible IO Tester

Fio is an advanced disk benchmark that depends upon the kernel's AIO access library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung SM961 256GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBIntel 600p 512GBIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 850 PRO 256GB50K100K150K200K250KSE +/- 1333.33, N = 3SE +/- 1732.05, N = 3SE +/- 2333.33, N = 3SE +/- 1333.33, N = 3SE +/- 3282.95, N = 3SE +/- 1666.67, N = 3SE +/- 1641.91, N = 11SE +/- 232.74, N = 425266725200024966724933324266721333315636411300014850-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung SM961 256GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBIntel 600p 512GBIntel DC P3600 800GBIntel Optane 900p 280GBSamsung 850 PRO 256GB2004006008001000SE +/- 5.90, N = 3SE +/- 6.64, N = 3SE +/- 9.02, N = 3SE +/- 5.03, N = 3SE +/- 12.81, N = 3SE +/- 6.17, N = 3SE +/- 6.44, N = 11SE +/- 0.33, N = 3SE +/- 0.96, N = 4987.00984.00976.00974.00947.00833.00610.00442.0058.08-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBSamsung SM961 256GBSamsung 970 EVO 250GBIntel Optane 900p 280GBIntel 600p 512GBIntel DC P3600 800GBSamsung 850 PRO 256GB7001400210028003500SE +/- 0.67, N = 3SE +/- 4.00, N = 3SE +/- 2.00, N = 3SE +/- 2.33, N = 3SE +/- 0.33, N = 3SE +/- 15.36, N = 11SE +/- 11.74, N = 12313423992234148014641278943874193-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz-ll -lnuma -libverbs -lz1. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lrt -laio -lm -lpthread -ldl

SQLite

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterSQLite 3.22Performance / Cost - Timed SQLite InsertionsIntel Optane 900p 280GBSamsung 970 EVO 250GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GB2K4K6K8K10K634.483662.644366.366145.1410045.941. Intel Optane 900p 280GB: $269.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO Plus 500GB: $129.99 reported cost.4. Samsung 970 EVO 500GB: $169.99 reported cost.5. Samsung 970 PRO 512GB: $229.15 reported cost.

BlogBench

BlogBench is designed to replicate the load of a real-world busy file server by stressing the file-system with multiple threads of random reads, writes, and rewrites. The behavior is mimicked of that of a blog by creating blogs with content and pictures, modifying blog posts, adding comments to these blogs, and then reading the content of the blogs. All of these blogs generated are created locally with fake content and pictures. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFinal Score, More Is BetterBlogBench 1.1Test: WriteSamsung 970 PRO 512GBIntel DC P3600 800GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBIntel Optane 900p 280GBSamsung 970 EVO 250GBIntel 600p 512GBSamsung 850 PRO 256GB12K24K36K48K60KSE +/- 410.04, N = 3SE +/- 302.37, N = 3SE +/- 964.50, N = 3SE +/- 987.49, N = 3SE +/- 278.70, N = 3SE +/- 176.21, N = 3SE +/- 395.45, N = 3SE +/- 39.57, N = 35424146360375633068723826167241316545051. (CC) gcc options: -O2 -pthread

IOzone

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterIOzone 3.465Performance / Cost - Record Size: 1MB - File Size: 8GB - Disk Test: Write PerformanceSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBIntel Optane 900p 280GBSamsung 970 EVO 500GBSamsung 970 EVO 250GB2468107.116.703.973.783.741. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 PRO 512GB: $229.15 reported cost.3. Intel Optane 900p 280GB: $269.99 reported cost.4. Samsung 970 EVO 500GB: $169.99 reported cost.5. Samsung 970 EVO 250GB: $98.75 reported cost.

Flexible IO Tester

OpenBenchmarking.orgIOPS Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBIntel Optane 900p 280GBSamsung 970 PRO 512GB300600900120015001425.751093.671056.931024.73837.881. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Intel Optane 900p 280GB: $269.99 reported cost.5. Samsung 970 PRO 512GB: $229.15 reported cost.

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectorySamsung 970 EVO Plus 500GBSamsung 970 EVO 250GBSamsung 970 EVO 500GBIntel Optane 900p 280GBSamsung 970 PRO 512GB1.2512.5023.7535.0046.2555.564.254.134.003.281. Samsung 970 EVO Plus 500GB: $129.99 reported cost.2. Samsung 970 EVO 250GB: $98.75 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Intel Optane 900p 280GB: $269.99 reported cost.5. Samsung 970 PRO 512GB: $229.15 reported cost.

Compile Bench

Compilebench tries to age a filesystem by simulating some of the disk IO common in creating, compiling, patching, stating and reading kernel trees. It indirectly measures how well filesystems can maintain directory locality as the disk fills up and directories age. This current test is setup to use the makej mode with 10 initial directories Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterCompile Bench 0.6Test: CompileSamsung 970 EVO Plus 500GBIntel Optane 900p 280GBSamsung 970 PRO 512GBSamsung 970 EVO 500GBIntel DC P3600 800GBSamsung 970 EVO 250GBIntel 600p 512GBSamsung SM961 256GBSamsung 850 PRO 256GB400800120016002000SE +/- 23.43, N = 3SE +/- 11.12, N = 3SE +/- 16.82, N = 3SE +/- 6.56, N = 3SE +/- 28.60, N = 4SE +/- 89.18, N = 3SE +/- 54.56, N = 3SE +/- 24.95, N = 3SE +/- 8.37, N = 3205620412037193718951688147413951327

Flexible IO Tester

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterFlexible IO Tester 3.1Performance / Cost - Type: Sequential Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBSamsung 970 EVO 500GBSamsung 970 PRO 512GBSamsung 970 EVO 250GB2468108.647.026.076.035.641. Intel Optane 900p 280GB: $269.99 reported cost.2. Samsung 970 EVO Plus 500GB: $129.99 reported cost.3. Samsung 970 EVO 500GB: $169.99 reported cost.4. Samsung 970 PRO 512GB: $229.15 reported cost.5. Samsung 970 EVO 250GB: $98.75 reported cost.

Drive Temperature (nvme0n1) Monitor

OpenBenchmarking.orgCelsiusDrive Temperature (nvme0n1) MonitorPhoronix Test Suite System MonitoringIntel 600p 512GBSamsung 970 EVO Plus 500GB816243240Min: 34 / Avg: 34.39 / Max: 36Min: 31 / Avg: 35.31 / Max: 36

IOzone

The IOzone benchmark tests the hard disk drive / file-system performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterIOzone 3.465Record Size: 1MB - File Size: 8GB - Disk Test: Write PerformanceSamsung 970 PRO 512GBSamsung SM961 256GBIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBIntel DC P3600 800GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBIntel 600p 512GBSamsung 850 PRO 256GB30060090012001500SE +/- 24.72, N = 3SE +/- 20.25, N = 12SE +/- 1.51, N = 3SE +/- 64.32, N = 3SE +/- 15.68, N = 12SE +/- 16.55, N = 12SE +/- 59.58, N = 3SE +/- 45.05, N = 3SE +/- 2.73, N = 61535.001342.371071.03924.36744.28643.00369.00235.0036.601. (CC) gcc options: -O3

Application Start-up Time

This benchmark measures the start-up time of applications when there is some I/O in the background. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectoryIntel 600p 512GBIntel Optane 900p 280GBSamsung 970 EVO Plus 500GBSamsung 970 PRO 512GBIntel DC P3600 800GBSamsung 970 EVO 500GBSamsung 970 EVO 250GBSamsung SM961 256GBSamsung 850 PRO 256GB918273645SE +/- 0.15, N = 3SE +/- 0.12, N = 9SE +/- 0.08, N = 3SE +/- 0.03, N = 3SE +/- 0.04, N = 4SE +/- 0.19, N = 6SE +/- 0.02, N = 3SE +/- 0.05, N = 4SE +/- 1.53, N = 62.032.082.162.352.603.033.133.3939.81

OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: xterm - Disk Target: Default Test DirectorySamsung 970 PRO 512GBIntel DC P3600 800GBSamsung 970 EVO Plus 500GBSamsung SM961 256GBIntel Optane 900p 280GBSamsung 970 EVO 500GBIntel 600p 512GBSamsung 970 EVO 250GBSamsung 850 PRO 256GB0.42530.85061.27591.70122.1265SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 9SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.16, N = 3SE +/- 0.03, N = 30.250.350.360.380.530.610.730.931.89

41 Results Shown

Flexible IO Tester
Application Start-up Time:
  Only Seq Reads - GNOME Terminal - Default Test Directory
  Only Seq Reads - LibreOffice Writer - Default Test Directory
Flexible IO Tester:
  Rand Write - Linux AIO - No - Yes - 2MB - Default Test Directory
  Rand Read - Linux AIO - No - Yes - 2MB - Default Test Directory
Flexible IO Tester:
  Performance / Cost - Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directory:
    IOPS Per Dollar
    MB/s Per Dollar
SQLite
Flexible IO Tester:
  Performance / Cost - Seq Write - Linux AIO - No - Yes - 2MB - Default Test Directory
  Performance / Cost - Rand Write - Linux AIO - No - Yes - 2MB - Default Test Directory
  Performance / Cost - Rand Read - Linux AIO - No - Yes - 2MB - Default Test Directory
Flexible IO Tester:
  Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directory:
    MB/s
    IOPS
BlogBench:
  Performance / Cost - Write
  Performance / Cost - Only Seq Reads - xterm - Default Test Directory
  Performance / Cost - 4000 Files, 32 Sub Dirs, 1MB Size
FS-Mark:
  4000 Files, 32 Sub Dirs, 1MB Size
  1000 Files, 1MB Size
Application Start-up Time
PostgreSQL pgbench
Application Start-up Time:
  Performance / Cost - Only Seq Reads - GNOME Terminal - Default Test Directory
  Performance / Cost - Seq Reads + Writes - GNOME Terminal - Default Test Directory
  Performance / Cost - 1000 Files, 1MB Size
  Performance / Cost - Only Seq Reads - LibreOffice Writer - Default Test Directory
  Performance / Cost - Mostly RAM - Normal Load - Read Write
  Performance / Cost - Compile
  Performance / Cost - Seq Reads + Writes - LibreOffice Writer - Default Test Directory
Flexible IO Tester:
  Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directory:
    IOPS
    MB/s
  Seq Write - Linux AIO - No - Yes - 2MB - Default Test Directory:
    MB/s
SQLite
BlogBench
IOzone:
  Performance / Cost - 1MB - 8GB - Write Performance
  Performance / Cost - Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directory
  Performance / Cost - Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directory
Compile Bench
Flexible IO Tester:
  Performance / Cost - Seq Read - Linux AIO - No - Yes - 2MB - Default Test Directory
  Phoronix Test Suite System Monitoring
IOzone
Application Start-up Time:
  Seq Reads + Writes - LibreOffice Writer - Default Test Directory
  Only Seq Reads - xterm - Default Test Directory

Intel 600p 512GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: 512GB INTEL SSDPEKNW512G8, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 12 February 2019 15:55 by user root.

Intel DC P3600 800GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: 800GB INTEL SSDPE2ME800G4, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 13 February 2019 13:51 by user root.

Intel Optane 900p 280GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: 280GB INTEL SSDPE21D280GA, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=256
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 13 February 2019 18:03 by user root.

Samsung 850 PRO 256GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: 256GB Samsung SSD 850, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,stripe=8191
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 12 February 2019 19:54 by user root.

Samsung 970 EVO 250GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: Samsung SSD 970 EVO 250GB, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 12 February 2019 09:44 by user root.

Samsung 970 EVO 500GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: Samsung SSD 970 EVO 500GB, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / errors=remount-ro,relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 11 February 2019 18:07 by user root.

Samsung 970 EVO Plus 500GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: Samsung SSD 970 EVO Plus 500GB, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 15 February 2019 07:09 by user root.

Samsung 970 PRO 512GB

Processor: AMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads), Motherboard: ASUS ROG ZENITH EXTREME (1601 BIOS), Chipset: AMD Family 17h, Memory: 4 x 8192 MB DDR4-1600MT/s F4-3200C14-8GFX, Disk: Samsung SSD 970 PRO 512GB, Graphics: llvmpipe, Audio: Realtek ALC1220, Network: Intel I211 + Qualcomm Atheros QCA6174 802.11ac + Wilocity Wil6200 802.11ad

OS: Ubuntu 18.04, Kernel: 5.0.0-050000rc6-generic (x86_64) 20190210, Desktop: GNOME Shell 3.28.3, Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1280x1024

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

Testing initiated at 12 February 2019 13:14 by user root.

Samsung SM961 256GB

Processor: Intel Core i5-8259U @ 3.80GHz (4 Cores / 8 Threads), Motherboard: Intel NUC8BEB (BECFL357.86A.0056.2018.1128.1717 BIOS), Chipset: Intel Cannon Point-LP Shared SRAM, Memory: 2 x 4096 MB DDR4-2400MT/s PSD44G240041S, Disk: 256GB SAMSUNG MZVPW256HEGL-00000 + 160GB INTEL SSDSA2BW16, Graphics: Intel HD 3GB (1050MHz), Audio: Realtek ALC233, Monitor: Acer E211H, Network: Intel I219-V + Intel Cannon Point-LP CNVi

OS: Fedora 29, Kernel: 4.20.7-200.fc29.x86_64 (x86_64), Desktop: Xfce 4.12, Display Server: X Server 1.20.3, Display Driver: modesetting 1.20.3, OpenGL: 4.5 Mesa 18.2.8, Compiler: GCC 8.2.1 20181215, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-redhat-linux --disable-libunwind-exceptions --enable-__cxa_atexit --enable-bootstrap --enable-cet --enable-checking=release --enable-gnu-indirect-function --enable-gnu-unique-object --enable-initfini-array --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,lto --enable-libmpx --enable-multilib --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --mandir=/usr/share/man --with-arch_32=i686 --with-gcc-major-version-only --with-isl --with-linker-hash-style=gnu --with-tune=generic --without-cuda-driver
Disk Notes: NONE / relatime,rw,seclabel
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15 + Python 3.7.2
Security Notes: SELinux + KPTI + __user pointer sanitization + Full generic retpoline IBPB: conditional IBRS_FW STIBP: conditional RSB filling + SSB disabled via prctl and seccomp + PTE Inversion; VMX: conditional cache flushes SMT vulnerable

Testing initiated at 16 February 2019 16:59 by user root.