Raspberry Pi Model 4 Benchmarks

ARMv8 Cortex-A53 @ 1.40GHz on AAEON AM62 2GB - Bookworm

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 2408239-NE-1907127HV04
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
RPi Model 3 B+
June 28 2019
  12 Hours, 20 Minutes
ASUS Tinker Board
July 01 2019
  3 Hours, 39 Minutes
Libre Board ALL-H3-CC H5
July 02 2019
  3 Hours, 34 Minutes
Firefly ROC-RK3328-CC
July 04 2019
  2 Hours, 14 Minutes
RPi Model 4 B 4GB
July 11 2019
  4 Hours, 45 Minutes
RPi Model 4 B 2GB
July 11 2019
  2 Hours, 24 Minutes
bommeltje-am62
August 22
  50 Minutes
AAEON AM62 2GB - Bommeltje
August 22
  2 Hours, 42 Minutes
Invert Behavior (Only Show Selected Data)
  4 Hours, 3 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

RPi Model 4 B 2GB

Changed Memory to 2048MB.

Changed Graphics to V3D 4.2 2GB.

bommeltje-am62

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt schedutil
Python Notes: Python 3.11.2
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + mmio_stale_data: Not affected + retbleed: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Not affected + srbds: Not affected + tsx_async_abort: Not affected

AAEON AM62 2GB - Bommeltje

Processor: ARMv8 Cortex-A53 @ 1.40GHz (4 Cores), Motherboard: Texas Instruments AM625 SK, Memory: 2048MB, Disk: 16GB DG4016, Graphics: tidssdrmfb, Monitor: MPI5001

OS: Debian 12, Kernel: 6.1.33-00001-ge4769b223d98-dirty (aarch64), Display Server: X Server 1.21.1.7, Compiler: GCC 12.2.0, File-System: ext4, Screen Resolution: 800x480

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 3.11.2
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + mmio_stale_data: Not affected + retbleed: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Not affected + srbds: Not affected + tsx_async_abort: Not affected

Raspberry Pi Model 4 BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorOSKernelDisplay ServerCompilerFile-SystemScreen ResolutionDesktopDisplay DriverOpenGLRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBbommeltje-am62AAEON AM62 2GB - BommeltjeARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3926MB32GB GB2MWBCM2708Raspbian 104.19.42-v7+ (armv7l)X Server 1.20.4GCC 8.3.0ext4656x416ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161024x768ARMv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H5Raspbian 9.64.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CCUbuntu 18.044.4.114 (aarch64)X Server 1.18.4GCC 7.4.01024x768ARMv7 rev 3 @ 1.50GHz (4 Cores)BCM2835 Raspberry Pi 4 Model B Rev 1.14096MB16GB SC16GV3D 4.2 4GBDELL P2415QRaspbian 104.19.50-v7l+ (armv7l)LXDE 0.10.0X Server 1.20.4modesetting 1.20.42.1 Mesa 19.1.0-develGCC 8.3.02048MBV3D 4.2 2GBARMv8 Cortex-A53 @ 1.40GHz (4 Cores)Texas Instruments AM625 SK16GB DG4016tidssdrmfbMPI5001Debian 126.1.33-00001-ge4769b223d98-dirty (aarch64)X Server 1.21.1.7GCC 12.2.0800x480OpenBenchmarking.orgCompiler Details- RPi Model 3 B+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Libre Board ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v - RPi Model 4 B 4GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - RPi Model 4 B 2GB: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v - bommeltje-am62: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v - AAEON AM62 2GB - Bommeltje: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v Processor Details- RPi Model 3 B+: Scaling Governor: BCM2835 Freq ondemand- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- RPi Model 4 B 4GB: Scaling Governor: BCM2835 Freq ondemand- RPi Model 4 B 2GB: Scaling Governor: BCM2835 Freq ondemand- bommeltje-am62: Scaling Governor: cpufreq-dt schedutil- AAEON AM62 2GB - Bommeltje: Scaling Governor: cpufreq-dt performancePython Details- RPi Model 3 B+: Python 2.7.16 + Python 3.7.3- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Libre Board ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.7- RPi Model 4 B 4GB: Python 2.7.16 + Python 3.7.3- RPi Model 4 B 2GB: Python 2.7.16 + Python 3.7.3- bommeltje-am62: Python 3.11.2- AAEON AM62 2GB - Bommeltje: Python 3.11.2Kernel Details- bommeltje-am62, AAEON AM62 2GB - Bommeltje: Transparent Huge Pages: alwaysSecurity Details- bommeltje-am62, AAEON AM62 2GB - Bommeltje: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + mmio_stale_data: Not affected + retbleed: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Not affected + srbds: Not affected + tsx_async_abort: Not affected

RPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBbommeltje-am62AAEON AM62 2GB - BommeltjeResult OverviewPhoronix Test Suite100%203%306%410%513%SmallptSciMarkGraphicsMagick

Raspberry Pi Model 4 Benchmarksx264: H.264 Video Encodingrust-prime: Prime Number Test To 200,000,000encode-flac: WAV To FLACnginx: Static Web Page Servingcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19pybench: Total For Average Test Timessmallpt: Global Illumination Renderer; 128 Samplesencode-mp3: WAV To MP3perl-benchmark: Pod2htmlphpbench: PHP Benchmark Suiteperl-benchmark: Interpretergraphics-magick: Resizinggraphics-magick: Rotatescimark2: CompositeRPi Model 3 B+ASUS Tinker BoardLibre Board ALL-H3-CC H5Firefly ROC-RK3328-CCRPi Model 4 B 4GBRPi Model 4 B 2GBbommeltje-am62AAEON AM62 2GB - Bommeltje0.143106.15777.652012.06787.0129609744.55658.822.56511278202750.03173653151648.803.321052.48135.253880.15239.989312273.30162.410.78254268594500.012298045366141.72566.40402.1340683424.02518.492.57273250213450.01091688222428.762.31140.20288.92343.3113542251.36295.441.31659761541310.00491447364451.133.101104.33111.094745.75291.485249260.72125.340.612074021015640.007784054563142.174.91657.76111.485104.85291.555233145.50125.220.621362991006780.008260855364143.022.35135.710241.500322947.412.55135.723290.5081218.9529680241.402288.3611.191216980.00894181343047.55OpenBenchmarking.org

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-09-25H.264 Video EncodingAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am621.10482.20963.31444.41925.524SE +/- 0.01, N = 3SE +/- 0.06, N = 12SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.06, N = 3SE +/- 0.08, N = 12SE +/- 0.02, N = 32.553.322.310.144.913.102.351. (CC) gcc options: -ldl -lm -lpthread

Rust Prime Benchmark

Based on petehunt/rust-benchmark, this is a prime number benchmark that is multi-threaded and written in Rustlang. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterRust Prime BenchmarkPrime Number Test To 200,000,000AAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am627001400210028003500SE +/- 0.02, N = 3SE +/- 5.80, N = 3SE +/- 0.21, N = 3SE +/- 18.94, N = 3SE +/- 0.03, N = 3SE +/- 3.97, N = 3SE +/- 0.04, N = 3135.721052.48140.203106.15657.761104.33135.71-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil-ldl -lrt -lpthread -lgcc_s -lc -lm -lutil1. (CC) gcc options: -pie -nodefaultlibs

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB2004006008001000SE +/- 0.13, N = 5SE +/- 2.04, N = 5SE +/- 0.88, N = 5SE +/- 0.71, N = 5SE +/- 3.13, N = 5SE +/- 0.35, N = 5SE +/- 0.69, N = 25290.51135.25288.92566.40777.65111.48111.09-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

NGINX Benchmark

This is a test of ab, which is the Apache Benchmark program running against nginx. This test profile measures how many requests per second a given system can sustain when carrying out 2,000,000 requests with 500 requests being carried out concurrently. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterNGINX Benchmark 1.9.9Static Web Page ServingASUS Tinker BoardRPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB11002200330044005500SE +/- 35.02, N = 3SE +/- 7.80, N = 3SE +/- 4.09, N = 3SE +/- 48.94, N = 93880.152012.065104.854745.751. (CC) gcc options: -lpthread -lcrypt -lcrypto -lz -O3 -march=native

Static Web Page Serving

AAEON AM62 2GB - Bommeltje: The test quit with a non-zero exit status. E: ./nginx: 2: ./nginx_/ab: not found

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19AAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB30060090012001500SE +/- 2.44, N = 3SE +/- 0.46, N = 3SE +/- 0.30, N = 3SE +/- 7.90, N = 3SE +/- 1.73, N = 3SE +/- 1.74, N = 3SE +/- 2.54, N = 31218.95239.98343.31402.13787.01291.55291.48-pthread -lz -llzma-pthread -lz -llzma-pthread -lz -llzma-pthread -lz -llzma-pthread -lz-pthread -lz1. (CC) gcc options: -O3

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB9K18K27K36K45KSE +/- 95.17, N = 3SE +/- 24.84, N = 3SE +/- 15.60, N = 3SE +/- 186.40, N = 3SE +/- 81.94, N = 3SE +/- 10.37, N = 3SE +/- 6.93, N = 39680931213542406832960952335249

Smallpt

Smallpt is a C++ global illumination renderer written in less than 100 lines of code. Global illumination is done via unbiased Monte Carlo path tracing and there is multi-threading support via the OpenMP library. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 128 SamplesAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am62160320480640800SE +/- 0.02, N = 3SE +/- 1.48, N = 3SE +/- 1.61, N = 3SE +/- 0.66, N = 3SE +/- 0.52, N = 3SE +/- 1.73, N = 6SE +/- 3.41, N = 3SE +/- 0.13, N = 3241.40273.30251.36424.02744.55145.50260.72241.501. (CXX) g++ options: -fopenmp -O3

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3AAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB140280420560700SE +/- 0.09, N = 3SE +/- 0.53, N = 3SE +/- 0.43, N = 3SE +/- 0.09, N = 3SE +/- 9.15, N = 3SE +/- 0.10, N = 3SE +/- 0.05, N = 3288.36162.41295.44518.49658.82125.22125.34-lncurses1. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.57891.15781.73672.31562.8945SE +/- 0.00657849, N = 3SE +/- 0.00901113, N = 3SE +/- 0.01503227, N = 3SE +/- 0.00916360, N = 3SE +/- 0.04479638, N = 9SE +/- 0.00462631, N = 3SE +/- 0.00287922, N = 31.191216980.782542681.316597612.572732502.565112780.621362990.61207402

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB20K40K60K80K100KSE +/- 993.16, N = 4SE +/- 53.78, N = 3SE +/- 16.22, N = 3SE +/- 53.36, N = 3SE +/- 519.36, N = 3SE +/- 239.15, N = 359450541312134520275100678101564

PHP Benchmark Suite

AAEON AM62 2GB - Bommeltje: The test run did not produce a result.

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.00710.01420.02130.02840.0355SE +/- 0.00000310, N = 3SE +/- 0.00002723, N = 3SE +/- 0.00001338, N = 3SE +/- 0.00001867, N = 3SE +/- 0.00039106, N = 8SE +/- 0.00016552, N = 12SE +/- 0.00011281, N = 150.008941810.012298040.004914470.010916880.031736530.008260850.00778405

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests to stress the system's CPU. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: ResizingAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am621224364860SE +/- 0.00, N = 3SE +/- 0.55, N = 11SE +/- 0.58, N = 5SE +/- 0.52, N = 123453362215534532-lxml2-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma-pthread -lSM -lICE-pthread -lSM -lICE-lxml21. (CC) gcc options: -fopenmp -O2 -lX11 -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: RotateAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am621530456075SE +/- 0.00, N = 3SE +/- 0.75, N = 9SE +/- 0.67, N = 3SE +/- 0.33, N = 33066442416646329-lxml2-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -llzma-pthread -ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -llzma-pthread -lSM -lICE-pthread -lSM -lICE-lxml21. (CC) gcc options: -fopenmp -O2 -lX11 -lz -lm -lgomp -lpthread

SciMark

This test runs the ANSI C version of SciMark 2.0, which is a benchmark for scientific and numerical computing developed by programmers at the National Institute of Standards and Technology. This test is made up of Fast Foruier Transform, Jacobi Successive Over-relaxation, Monte Carlo, Sparse Matrix Multiply, and dense LU matrix factorization benchmarks. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: CompositeAAEON AM62 2GB - BommeltjeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GBbommeltje-am62306090120150SE +/- 0.02, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.11, N = 3SE +/- 0.87, N = 3SE +/- 1.27, N = 3SE +/- 0.01, N = 347.55141.7251.1328.7648.80143.02142.1747.411. (CC) gcc options: -lm

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-09-25Performance / Cost - H.264 Video EncodingASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 4 B 2GBRPi Model 4 B 4GB0.02480.04960.07440.09920.1240.050.070.110.061. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 4 B 2GB: $45 reported cost.4. RPi Model 4 B 4GB: $55 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB5001000150020002500837.321546.60609.86579.292237.291846.621. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

NGINX Benchmark

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterNGINX Benchmark 1.9.9Performance / Cost - Static Web Page ServingASUS Tinker BoardRPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB30609012015054.6557.49113.4486.291. ASUS Tinker Board: $71 reported cost.2. RPi Model 3 B+: $35 reported cost.3. RPi Model 4 B 2GB: $45 reported cost.4. RPi Model 4 B 4GB: $55 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB300K600K900K1200K1500K661152.00473970.001423905.001036315.00235485.00288695.001. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.24980.49960.74940.99921.2490.870.170.381.110.370.431. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB2040608010055.5646.0890.0589.7827.9633.661. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3ASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB5K10K15K20K25K11531.1110340.4018147.1523058.705634.906893.701. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB6K12K18K24K30K9602.7510112.2019824.0027217.755016.606109.951. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB6K12K18K24K30K17038.5812015.8514074.5527545.3513119.7516031.401. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

Smallpt

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterSmallpt 1.0Performance / Cost - Global Illumination Renderer; 128 SamplesASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB6K12K18K24K30K19404.308797.6014840.7026059.256547.5014339.601. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

Rust Prime Benchmark

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterRust Prime BenchmarkPerformance / Cost - Prime Number Test To 200,000,000ASUS Tinker BoardFirefly ROC-RK3328-CCRPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB20K40K60K80K100K74726.084907.00108715.2529599.2060738.151. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. RPi Model 3 B+: $35 reported cost.4. RPi Model 4 B 2GB: $45 reported cost.5. RPi Model 4 B 4GB: $55 reported cost.

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: ResizingASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.26550.5310.79651.0621.32750.751.030.630.431.180.821. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

OpenBenchmarking.orgIterations Per Minute Per Dollar, More Is BetterGraphicsMagick 1.3.30Performance / Cost - Operation: RotateASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.31950.6390.95851.2781.59750.931.260.690.461.421.151. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

SciMark

OpenBenchmarking.orgMflops Per Dollar, More Is BetterSciMark 2.0Performance / Cost - Computational Test: CompositeASUS Tinker BoardFirefly ROC-RK3328-CCLibre Board ALL-H3-CC H5RPi Model 3 B+RPi Model 4 B 2GBRPi Model 4 B 4GB0.71551.4312.14652.8623.57752.001.460.821.393.182.581. ASUS Tinker Board: $71 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Libre Board ALL-H3-CC H5: $35 reported cost.4. RPi Model 3 B+: $35 reported cost.5. RPi Model 4 B 2GB: $45 reported cost.6. RPi Model 4 B 4GB: $55 reported cost.

RPi Model 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 10, Kernel: 4.19.42-v7+ (armv7l), Display Server: X Server 1.20.4, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 28 June 2019 07:52 by user pi.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 1 July 2019 13:20 by user linaro.

Libre Board ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 2 July 2019 12:42 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 4 July 2019 11:05 by user firefly.

RPi Model 4 B 4GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 4096MB, Disk: 16GB SC16G, Graphics: V3D 4.2 4GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 10:32 by user pi.

RPi Model 4 B 2GB

Processor: ARMv7 rev 3 @ 1.50GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 4 Model B Rev 1.1, Memory: 2048MB, Disk: 16GB SC16G, Graphics: V3D 4.2 2GB, Monitor: DELL P2415Q

OS: Raspbian 10, Kernel: 4.19.50-v7l+ (armv7l), Desktop: LXDE 0.10.0, Display Server: X Server 1.20.4, Display Driver: modesetting 1.20.4, OpenGL: 2.1 Mesa 19.1.0-devel, Compiler: GCC 8.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-gcc-major-version-only --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 11 July 2019 20:46 by user pi.

bommeltje-am62

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt schedutil
Python Notes: Python 3.11.2
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + mmio_stale_data: Not affected + retbleed: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Not affected + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 22 August 2024 18:30 by user root.

AAEON AM62 2GB - Bommeltje

Processor: ARMv8 Cortex-A53 @ 1.40GHz (4 Cores), Motherboard: Texas Instruments AM625 SK, Memory: 2048MB, Disk: 16GB DG4016, Graphics: tidssdrmfb, Monitor: MPI5001

OS: Debian 12, Kernel: 6.1.33-00001-ge4769b223d98-dirty (aarch64), Display Server: X Server 1.21.1.7, Compiler: GCC 12.2.0, File-System: ext4, Screen Resolution: 800x480

Kernel Notes: Transparent Huge Pages: always
Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2 --enable-libphobos-checking=release --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-target-system-zlib=auto -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 3.11.2
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + mmio_stale_data: Not affected + retbleed: Not affected + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Not affected + srbds: Not affected + tsx_async_abort: Not affected

Testing initiated at 22 August 2024 20:25 by user root.