Various ARM Linux Benchmarks - Spetember 2018

ARM Workstation vs SBC

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1905313-JONA-190527343
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
Atomic Pi
May 24 2019
 
Atomic Pi - Stock
May 24 2019
  4 Hours, 48 Minutes
Atomic Pi - Performance Governor
May 27 2019
  4 Hours, 31 Minutes
ClearFog-ITX
May 31 2019
  1 Hour, 40 Minutes
Invert Behavior (Only Show Selected Data)
  7 Hours, 10 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H3

Changed Memory to 1024MB.

Changed Disk to 32GB GB1QT.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Atomic Pi

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Atomic Pi - Stock

Atomic Pi - Performance Governor

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON MF-001 (MFC1AM12 BIOS), Chipset: Intel Atom/Celeron/Pentium, Memory: 2048MB, Disk: 16GB M52516, Graphics: Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz), Monitor: DELL P2312H, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.15.18-dli (x86_64), Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

ClearFog-ITX

Processor: ARMv8 Cortex-A72 @ 2.00GHz (16 Cores), Motherboard: SolidRun LX2160A COM type 7 module, Memory: 14336MB, Disk: 250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064

OS: Ubuntu 19.04, Kernel: 4.14.83-dirty (aarch64), Compiler: GCC 8.3.0, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: qoriq_cpufreq performance
Python Notes: Python 2.7.16 + Python 3.7.3

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskMonitorGraphicsAudioChipsetNetworkOSKernelCompilerFile-SystemScreen ResolutionDisplay ServerDesktopDisplay DriverVulkanALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAtomic PiAtomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITXARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H3493MB32GB SC32GVE228Ubuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.0ext41920x10801024MB32GB GB1QTARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.44.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GAcer P243W4.14.53-00653-gc01abe8ba6bc (aarch64)LXDE1920x1200ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)X Server 1.18.4GCC 4.9.21280x720Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)GCC 7.3.01920x1080p60ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.8GCC 5.4.0 201606091920x1200ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34DELL P2415Q3840x2160ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)1920x2160Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)X Server 1.18.4GCC 5.4.0 201606091920x1080ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.44.14.50-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QT4.14.62-v7+ (armv7l)656x416ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1920x1200Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.01920x1080ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTAcer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516Intel Atom x5-Z8350 @ 1.92GHz (4 Cores)AAEON MF-001 (MFC1AM12 BIOS)Intel Atom/Celeron/Pentium16GB M52516Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz)DELL P2312HRealtek RTL8111/8168/8411Ubuntu 18.044.15.18-dli (x86_64)X Server 1.19.6modesetting 1.19.6GCC 7.4.0ARMv8 Cortex-A72 @ 2.00GHz (16 Cores)SolidRun LX2160A COM type 7 module14336MB250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064Ubuntu 19.044.14.83-dirty (aarch64)GCC 8.3.0OpenBenchmarking.orgCompiler Details- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- Atomic Pi: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Atomic Pi - Stock: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Atomic Pi - Performance Governor: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- ClearFog-ITX: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -vProcessor Details- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID-C1+: Scaling Governor: meson_cpufreq performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Tinker Board: Scaling Governor: cpufreq-dt interactive- Atomic Pi: Scaling Governor: intel_pstate powersave- Atomic Pi - Stock: Scaling Governor: intel_pstate powersave- Atomic Pi - Performance Governor: Scaling Governor: intel_pstate performance- ClearFog-ITX: Scaling Governor: qoriq_cpufreq performancePython Details- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- Banana Pi M3: Python 2.7.9 + Python 3.4.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- Atomic Pi: Python 2.7.15rc1 + Python 3.6.7- Atomic Pi - Stock: Python 2.7.15rc1 + Python 3.6.7- Atomic Pi - Performance Governor: Python 2.7.15rc1 + Python 3.6.7- ClearFog-ITX: Python 2.7.16 + Python 3.7.3Disk Mount Options Details- Jetson TX2: data=ordered,relatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024- Raspberry Pi 2 B: data=ordered,noatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- Raspberry Pi 3 B+: data=ordered,noatime,rw- Tinker Board: data=ordered,noatime,rwDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rwSecurity Details- Atomic Pi, Atomic Pi - Stock, Atomic Pi - Performance Governor: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Various ARM Linux Benchmarks - Spetember 2018encode-flac: WAV To FLACpybench: Total For Average Test Timesphpbench: PHP Benchmark Suitescikit-learn: aobench: 2048 x 2048 - Total Timetinymembench: Standard Memcpyperl-benchmark: Pod2htmlencode-mp3: WAV To MP3hint: FLOATc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19x264: H.264 Video Encodingpgbench: Buffer Test - Normal Load - Read Onlyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingcompress-7zip: Compress Speed Testredis: GETredis: SETperl-benchmark: Interpretergit: Time To Complete Common Git Commandspgbench: Buffer Test - Normal Load - Read WriteALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAtomic PiAtomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX537.2729409266226988272.27366223535.90346378804166197514071.1310.7311620.0101216591.83537.42293892664222467009122.26615629536.62346403334156194013831.1410.8311970.0101096587.37566.384068021324151549113392.57579869518.513400372030881623121911.91130154779379270.0105771877.19334.63228763785595428220951.49377750300.96591213881755891808550220.302209102953715250.0077608054.41603279.9215990182022214617382.59638113266.3567935371166987610692654124215798810.03473245293.37140305380265028915661.31366123296.206112961217739348482.12297719512656081896230.0051476140.0426378.86634811197943416538620.60071034113.14883813138514014415.961607945.0545264846883335350.0023586923.66122265.15535713317513437980.4874690495.911039880876754551442756506608134322780.0098703117.571793344.23237733405216314579281.73162418331.0155729881272015919781.46519914.1514771673461005610.0081423169.23345263.28127755917666426016881.11893361266.806767326115375998222.89605923.0721982715471945810.0055119338.99719352.20201963698885335213771.40449621350.1950185204234294310342.12455515.732555461598100.0102578652.64456534.59379072083623286679562.46504575514.11359526604375189713151.10385610.941125113111672100.0134515597.32133387.09243493442084433312971.29447902352.6650009135235715439342.03664015.6618632130671317640.0084208457.19409336.07209234016578529012881.11833973301.9857957193207411138672.09652616.8217962407611503370.0074290151.84144390.76193863892289940015431.57088061406.394415037639113393112.413150689.2893682357211600530.0065884046.374166122.0592566639847419215020.69415680145.598075532510485734.421330927.8034723263512187470.0042808126.06114264.18707110337438327326270.89794910176.077375585415263428044.28991030.4035623552022518270.0078757030.84114064.17706010353738227327720.90904345175.857373602715263418024.30995130.3635843161142503310.0048730830.70115059.00427315669030.3592.6048770.4189956290.6914148865411562.0835629.2777507239.50230799003076008310.0025315914.363089OpenBenchmarking.org

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACClearFog-ITXAtomic Pi - Performance GovernorAtomic Pi - StockJetson TX2Jetson TX1Tinker BoardODROID-C2Banana Pi M3Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5120240360480600SE +/- 0.03, N = 5SE +/- 0.74, N = 5SE +/- 0.41, N = 22SE +/- 0.17, N = 5SE +/- 0.39, N = 5SE +/- 1.28, N = 5SE +/- 1.35, N = 5SE +/- 1.17, N = 5SE +/- 1.63, N = 5SE +/- 0.86, N = 5SE +/- 0.93, N = 5SE +/- 1.72, N = 5SE +/- 0.17, N = 5SE +/- 0.55, N = 5SE +/- 0.03, N = 5SE +/- 2.05, N = 5SE +/- 0.65, N = 5SE +/- 0.68, N = 5SE +/- 0.29, N = 559.0064.1764.1865.1578.86122.05263.28279.92293.37334.63336.07344.23352.20387.09390.76534.59537.27537.42566.38-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesClearFog-ITXJetson TX2Jetson TX1Atomic Pi - Performance GovernorAtomic Pi - StockTinker BoardODROID-C2Firefly ROC-RK3328-CCBanana Pi M3Socionext DeveloperboxPine64 1GBRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C1+Raspberry Pi 3 BALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BALL-H3-CC H59K18K27K36K45KSE +/- 1.76, N = 3SE +/- 16.86, N = 3SE +/- 21.11, N = 3SE +/- 11.67, N = 3SE +/- 6.89, N = 3SE +/- 16.41, N = 3SE +/- 167.68, N = 3SE +/- 46.73, N = 3SE +/- 60.92, N = 3SE +/- 13.74, N = 3SE +/- 32.08, N = 3SE +/- 85.92, N = 3SE +/- 50.54, N = 3SE +/- 37.03, N = 3SE +/- 25.83, N = 3SE +/- 35.56, N = 3SE +/- 50.90, N = 3SE +/- 51.49, N = 3SE +/- 54.78, N = 342735357634870607071925612775140301599019386201962092322876237732434929389294093790740680

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyTinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C1+ODROID-C2Firefly ROC-RK3328-CCJetson TX1Socionext DeveloperboxJetson TX250100150200250234.11189.77164.05122.27106.1096.2559.5433.7126.2626.231. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Jetson TX1: $476.99 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Jetson TX2: $549.99 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteClearFog-ITXJetson TX2Jetson TX1Atomic Pi - Performance GovernorAtomic Pi - StockTinker BoardODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxAML-S905X-CC Le PotatoPine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 2 BBanana Pi M330K60K90K120K150KSE +/- 1282.46, N = 3SE +/- 871.71, N = 3SE +/- 1075.34, N = 3SE +/- 22.01, N = 3SE +/- 38.84, N = 3SE +/- 222.05, N = 3SE +/- 287.89, N = 3SE +/- 238.66, N = 3SE +/- 65.58, N = 3SE +/- 16.44, N = 3SE +/- 52.26, N = 3SE +/- 17.90, N = 3SE +/- 58.48, N = 3SE +/- 82.63, N = 3SE +/- 27.36, N = 3SE +/- 26.01, N = 3SE +/- 7.80, N = 3SE +/- 141.51, N = 3SE +/- 84.14, N = 31566901331751119791035371033746639859176538024016538922378553698834420340522664226622213242083618202

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingTinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2ALL-H3-CC H2+Firefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+Socionext DeveloperboxJetson TX10.0180.0360.0540.0720.090.080.060.050.050.050.040.040.030.010.011. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. ODROID-C2: $62.95 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Jetson TX1: $476.99 reported cost.

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1ClearFog-ITXBanana Pi M3Atomic Pi - Performance GovernorAtomic Pi - StockJetson TX1Tinker BoardFirefly ROC-RK3328-CCODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BPine64 1GBSocionext DeveloperboxAML-S905X-CC Le PotatoALL-H3-CC H5ODROID-C1+ALL-H3-CC H3Raspberry Pi 2 B5001000150020002500SE +/- 0.14, N = 3SE +/- 0.29, N = 3SE +/- 0.27, N = 3SE +/- 0.66, N = 3SE +/- 1.69, N = 3SE +/- 1.43, N = 3SE +/- 1.06, N = 3SE +/- 1.01, N = 3SE +/- 1.26, N = 3SE +/- 0.80, N = 3SE +/- 0.51, N = 3SE +/- 0.74, N = 3SE +/- 1.54, N = 3SE +/- 1.25, N = 3SE +/- 2.27, N = 3SE +/- 1.01, N = 3SE +/- 7.83, N = 330.35221.00382.00383.00434.00474.00650.00664.00785.00844.00853.00899.00954.001515.001631.002246.002328.00

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelTinker BoardAML-S905X-CC Le PotatoRaspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2ALL-H3-CC H2+ALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K59578.8078975.0082471.4382503.7288650.0096754.15104150.00123520.00124680.00133280.00371243.25405918.49469200.001. Tinker Board: $56.85 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteTinker BoardAML-S905X-CC Le PotatoRaspberry Pi 3 BODROID-C2ODROID-C1+Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxJetson TX2Jetson TX151015202520.0913.4011.6911.427.045.263.623.473.262.561. Tinker Board: $56.85 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. ODROID-C1+: $49.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. Raspberry Pi 3 B+: $39.78 reported cost.8. Socionext Developerbox: $1200.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.

7-Zip Compression

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestTinker BoardRaspberry Pi 3 BAML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+ALL-H3-CC H3Firefly ROC-RK3328-CCODROID-C2ALL-H3-CC H5ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox142842567061.0753.2449.0946.4845.1539.9039.0234.9232.5330.1410.279.497.811. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. ALL-H3-CC H3: $30.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeClearFog-ITXJetson TX2Jetson TX1Tinker BoardODROID-C2Atomic Pi - StockAtomic Pi - Performance GovernorAML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BPine64 1GBSocionext DeveloperboxODROID-C1+Banana Pi M3ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H2+ALL-H3-CC H3150300450600750SE +/- 0.02, N = 3SE +/- 0.07, N = 3SE +/- 0.11, N = 3SE +/- 0.05, N = 3SE +/- 0.05, N = 3SE +/- 0.59, N = 3SE +/- 0.38, N = 3SE +/- 0.12, N = 3SE +/- 0.18, N = 3SE +/- 3.87, N = 6SE +/- 0.44, N = 3SE +/- 0.24, N = 3SE +/- 0.28, N = 3SE +/- 2.17, N = 3SE +/- 5.31, N = 3SE +/- 1.23, N = 3SE +/- 0.55, N = 3SE +/- 0.03, N = 3SE +/- 0.21, N = 392.60134.00165.00192.00260.00273.00273.00282.00289.00290.00333.00352.00400.00457.00461.00491.00667.00698.00700.001. (CC) gcc options: -lm -O3

TTSIOD 3D Renderer

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingTinker BoardRaspberry Pi 3 BAML-S905X-CC Le PotatoALL-H3-CC H2+Raspberry Pi 3 B+ODROID-C2ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Jetson TX1Socionext Developerbox0.11030.22060.33090.44120.55150.490.450.450.430.420.370.360.300.290.090.071. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACTinker BoardRaspberry Pi 3 B+ALL-H3-CC H2+Raspberry Pi 3 BFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H3ODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K6938.5413368.8613431.7513544.2814668.5015058.3516122.6016573.4816867.2722655.2035831.8537615.43468912.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyClearFog-ITXJetson TX1Jetson TX2Atomic Pi - Performance GovernorAtomic Pi - StockAML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxTinker BoardPine64 1GBALL-H3-CC H5Raspberry Pi 3 BRaspberry Pi 3 B+Raspberry Pi 2 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M310002000300040005000487738623798277226272095168815661543150213771339129712889569289128277381. (CC) gcc options: -O2 -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlClearFog-ITXJetson TX2Jetson TX1Tinker BoardAtomic Pi - StockAtomic Pi - Performance GovernorRaspberry Pi 3 B+ODROID-C2Raspberry Pi 3 BFirefly ROC-RK3328-CCPine64 1GBAML-S905X-CC Le PotatoSocionext DeveloperboxODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 BALL-H3-CC H5Banana Pi M30.58421.16841.75262.33682.921SE +/- 0.00119166, N = 3SE +/- 0.00383151, N = 3SE +/- 0.00322779, N = 3SE +/- 0.00065111, N = 3SE +/- 0.00162921, N = 3SE +/- 0.00485288, N = 3SE +/- 0.01837187, N = 4SE +/- 0.02171209, N = 3SE +/- 0.00473476, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00496104, N = 3SE +/- 0.00368669, N = 3SE +/- 0.00683757, N = 3SE +/- 0.06022970, N = 6SE +/- 0.00913039, N = 3SE +/- 0.00906752, N = 3SE +/- 0.04245993, N = 9SE +/- 0.01160841, N = 3SE +/- 0.02860806, N = 30.418995620.487469040.600710340.694156800.897949100.909043451.118339731.118933611.294479021.313661231.404496211.493777501.570880611.731624182.266156292.273662232.465045752.575798692.59638113

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Tinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H2+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+ODROID-C2ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K8276.7912012.7612339.5713397.5013543.2014810.0016098.6016219.4916795.0620740.4052749.5453966.65487668.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ODROID-C2: $62.95 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ClearFog-ITXJetson TX2Jetson TX1Tinker BoardAtomic Pi - Performance GovernorAtomic Pi - StockBanana Pi M3ODROID-C2Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H5ALL-H3-CC H2+ALL-H3-CC H3120240360480600SE +/- 0.07, N = 3SE +/- 0.11, N = 3SE +/- 0.15, N = 3SE +/- 0.06, N = 3SE +/- 0.11, N = 3SE +/- 0.21, N = 3SE +/- 2.53, N = 3SE +/- 2.55, N = 3SE +/- 0.24, N = 3SE +/- 0.09, N = 3SE +/- 0.49, N = 3SE +/- 0.99, N = 3SE +/- 0.11, N = 3SE +/- 0.10, N = 3SE +/- 0.07, N = 3SE +/- 0.40, N = 3SE +/- 0.09, N = 3SE +/- 0.29, N = 3SE +/- 0.28, N = 390.6995.91113.14145.59175.85176.07266.35266.80296.20300.96301.98331.01350.19352.66406.39514.11518.51535.90536.62-lncurses1. (CC) gcc options: -lm

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationODROID-C2AML-S905X-CC Le PotatoRaspberry Pi 3 B+Firefly ROC-RK3328-CCALL-H3-CC H2+Raspberry Pi 3 BALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Socionext DeveloperboxJetson TX140K80K120K160K200K37707.0540095.0044275.1446700.0049375.0053989.5758200.0064920.0077959.00159600.00191272.991. ODROID-C2: $62.95 reported cost.2. AML-S905X-CC Le Potato: $45.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Socionext Developerbox: $1200.00 reported cost.11. Jetson TX1: $476.99 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlTinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H2+Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H3ODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox40080012001600200039.4644.4945.2956.8465.6867.2267.9870.4484.85103.03268.10286.531885.061. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesTinker BoardFirefly ROC-RK3328-CCALL-H3-CC H2+ODROID-C2Raspberry Pi 3 B+Raspberry Pi 3 BALL-H3-CC H3AML-S905X-CC Le PotatoODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox5M10M15M20M25M526203.60701500.00735225.00804186.25832316.94851971.51881670.001029420.001164877.001627200.002946296.433027932.5223263200.001. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ODROID-C2: $62.95 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeTinker BoardRaspberry Pi 3 B+Raspberry Pi 3 BAML-S905X-CC Le PotatoFirefly ROC-RK3328-CCODROID-C2ALL-H3-CC H2+ALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox100K200K300K400K500K10915.2011536.2011651.6712690.0014450.0016367.0017450.0019640.0021000.0022393.0073698.6678703.35480000.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H2+: $25.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Tinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+Firefly ROC-RK3328-CCODROID-C2AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX1Socionext Developerbox200K400K600K800K1000K26946.9029531.5631227.3032500.0041798.8042930.0060600.0067380.0079919.00207013.661078800.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H5: $40.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATClearFog-ITXJetson TX2Jetson TX1Tinker BoardAtomic Pi - StockAtomic Pi - Performance GovernorBanana Pi M3ODROID-C2Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoRaspberry Pi 3 B+ODROID-C1+Pine64 1GBRaspberry Pi 3 BSocionext DeveloperboxRaspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H530M60M90M120M150MSE +/- 25533.70, N = 3SE +/- 187708.64, N = 3SE +/- 466387.18, N = 3SE +/- 3664.18, N = 3SE +/- 25305.03, N = 3SE +/- 33051.09, N = 3SE +/- 132627.22, N = 3SE +/- 19085.92, N = 3SE +/- 19531.90, N = 3SE +/- 7375.88, N = 3SE +/- 271590.74, N = 3SE +/- 359364.97, N = 3SE +/- 27122.74, N = 3SE +/- 73922.97, N = 3SE +/- 3286.77, N = 3SE +/- 113633.28, N = 3SE +/- 1696.71, N = 3SE +/- 1621.71, N = 3SE +/- 9829.94, N = 314148865410398808788381313807553257375585473736027679353716767326161129612591213885795719355729881501852045000913544150376359526603464033334637880340037201. (CC) gcc options: -O3 -march=native -lm

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATRaspberry Pi 3 B+Raspberry Pi 3 BTinker BoardALL-H3-CC H2+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCALL-H3-CC H3ODROID-C1+ODROID-C2ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox300K600K900K1200K1500K1456943.011429240.781420498.241385515.201313808.621222592.241154677.771137344.511075031.95850093.00189072.69185289.6636791.981. Raspberry Pi 3 B+: $39.78 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Tinker Board: $56.85 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ODROID-C2: $62.95 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelClearFog-ITXSocionext DeveloperboxJetson TX2Jetson TX1Tinker BoardAtomic Pi - StockAtomic Pi - Performance GovernorODROID-C2Banana Pi M3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCRaspberry Pi 3 B+Pine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B9001800270036004500SE +/- 3.80, N = 3SE +/- 1.67, N = 3SE +/- 60.69, N = 9SE +/- 60.87, N = 9SE +/- 5.86, N = 3SE +/- 0.55, N = 3SE +/- 0.61, N = 3SE +/- 0.45, N = 3SE +/- 22.18, N = 3SE +/- 2.44, N = 3SE +/- 10.58, N = 3SE +/- 2.67, N = 3SE +/- 3.98, N = 3SE +/- 16.16, N = 3SE +/- 5.34, N = 3SE +/- 5.10, N = 3SE +/- 1.59, N = 3SE +/- 6.17, N = 3SE +/- 6.73, N = 31153916758511048152615261537166917551773207423422357272030884156416643751. (CC) gcc options: -lm -lpthread -O3

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsTinker BoardRaspberry Pi 3 BFirefly ROC-RK3328-CCRaspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoODROID-C2ALL-H3-CC H3ALL-H3-CC H5ODROID-C1+Jetson TX2Jetson TX1Socionext Developerbox12K24K36K48K60K1481.512001.082002.002062.202295.752448.452454.422621.103087.603392.279663.3211285.5855644.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. ALL-H3-CC H2+: $25.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyAML-S905X-CC Le PotatoRaspberry Pi 3 BALL-H3-CC H5ALL-H3-CC H2+Raspberry Pi 3 B+Firefly ROC-RK3328-CCALL-H3-CC H3ODROID-C2Tinker BoardODROID-C1+Jetson TX1Jetson TX2Socionext Developerbox112233445546.5637.0733.4833.0832.3831.3230.4026.8126.4218.948.106.911.291. AML-S905X-CC Le Potato: $45.00 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. Raspberry Pi 3 B+: $39.78 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Tinker Board: $56.85 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteTinker BoardFirefly ROC-RK3328-CCALL-H3-CC H2+Raspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ALL-H3-CC H3AML-S905X-CC Le PotatoODROID-C1+ALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox300600900120015001167.951076.041064.881009.68983.71940.05888.07841.22694.94533.10242.14234.7632.441. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. Raspberry Pi 3 B+: $39.78 reported cost.5. Raspberry Pi 3 B: $34.99 reported cost.6. ODROID-C2: $62.95 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX2: $549.99 reported cost.12. Jetson TX1: $476.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Tinker BoardRaspberry Pi 3 BRaspberry Pi 3 B+ALL-H3-CC H2+AML-S905X-CC Le PotatoALL-H3-CC H3Firefly ROC-RK3328-CCODROID-C1+ALL-H3-CC H5ODROID-C2Jetson TX1Jetson TX2Socionext Developerbox200K400K600K800K1000K32575.0532680.6634489.2635175.0036360.0041490.0042400.0047922.0048760.0051744.90210352.59250245.451117200.001. Tinker Board: $56.85 reported cost.2. Raspberry Pi 3 B: $34.99 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. ALL-H3-CC H2+: $25.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. ALL-H3-CC H3: $30.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ODROID-C1+: $49.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C2: $62.95 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterTinker BoardALL-H3-CC H2+Firefly ROC-RK3328-CCRaspberry Pi 3 BALL-H3-CC H3Raspberry Pi 3 B+AML-S905X-CC Le PotatoODROID-C2ODROID-C1+ALL-H3-CC H5Jetson TX1Jetson TX2Socionext Developerbox2468100.240.250.260.290.300.300.350.350.400.421.135.437.911. Tinker Board: $56.85 reported cost.2. ALL-H3-CC H2+: $25.00 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ALL-H3-CC H3: $30.00 reported cost.6. Raspberry Pi 3 B+: $39.78 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. ODROID-C1+: $49.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. Jetson TX1: $476.99 reported cost.12. Jetson TX2: $549.99 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationClearFog-ITXSocionext DeveloperboxAtomic Pi - Performance GovernorAtomic Pi - StockJetson TX1ODROID-C2Banana Pi M3AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+400800120016002000SE +/- 0.28, N = 3SE +/- 0.13, N = 3SE +/- 0.15, N = 3SE +/- 0.13, N = 3SE +/- 15.34, N = 9SE +/- 3.10, N = 3SE +/- 13.52, N = 5SE +/- 4.98, N = 3SE +/- 15.71, N = 3SE +/- 14.59, N = 5SE +/- 11.17, N = 3SE +/- 21.17, N = 5SE +/- 31.20, N = 3SE +/- 19.70, N = 9SE +/- 5.62, N = 3SE +/- 15.03, N = 3SE +/- 21.10, N = 362.08133.00341.00342.00401.00599.00876.00891.00934.00943.001113.001543.001591.001623.001897.001940.001975.001. (CXX) g++ options: -O3 -lpthread

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETRaspberry Pi 3 BRaspberry Pi 3 B+Tinker BoardFirefly ROC-RK3328-CCODROID-C2ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox130026003900520065006089.376052.315740.565312.164313.693415.222287.841369.481201.501016.14196.431. Raspberry Pi 3 B: $34.99 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Tinker Board: $56.85 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ClearFog-ITXJetson TX1Jetson TX2Tinker BoardAtomic Pi - Performance GovernorAtomic Pi - StockAML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 B+Socionext DeveloperboxRaspberry Pi 3 BODROID-C1+Pine64 1GBBanana Pi M3ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+30060090012001500SE +/- 0.94, N = 3SE +/- 1.94, N = 3SE +/- 0.02, N = 3SE +/- 0.74, N = 3SE +/- 1.61, N = 3SE +/- 0.75, N = 3SE +/- 1.29, N = 3SE +/- 1.06, N = 3SE +/- 2.33, N = 3SE +/- 0.57, N = 3SE +/- 2.72, N = 3SE +/- 0.31, N = 3SE +/- 6.01, N = 3SE +/- 0.98, N = 3SE +/- 3.00, N = 3SE +/- 1.72, N = 3SE +/- 6.35, N = 3SE +/- 0.40, N = 3SE +/- 1.50, N = 3356441455573802804808822848867931934978103410691219131513831407-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETTinker BoardFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+AML-S905X-CC Le PotatoALL-H3-CC H5Jetson TX2Jetson TX1Socionext Developerbox80016002400320040003847.793792.463779.213765.763091.042052.271589.44948.18785.97699.25133.381. Tinker Board: $56.85 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. Jetson TX2: $549.99 reported cost.10. Jetson TX1: $476.99 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingClearFog-ITXSocionext DeveloperboxJetson TX1Tinker BoardAtomic Pi - Performance GovernorAtomic Pi - StockODROID-C2Pine64 1GBFirefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B714212835SE +/- 0.22, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.05, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 329.2712.415.964.424.304.282.892.122.122.092.031.461.141.131.10-lavformat -lavcodec -lavutil -lswscale -m64 -O3 -ffast-math -std=gnu99 -fPIC -fomit-frame-pointer -fno-tree-vectorize-lavformat -lavcodec -lavutil -lswscale -m64 -O3 -ffast-math -std=gnu99 -fPIC -fomit-frame-pointer -fno-tree-vectorize1. (CC) gcc options: -ldl -lm -lpthread

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyClearFog-ITXSocionext DeveloperboxJetson TX1Jetson TX2Tinker BoardAtomic Pi - Performance GovernorAtomic Pi - StockRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C2AML-S905X-CC Le PotatoODROID-C1+Pine64 1GBRaspberry Pi 2 BFirefly ROC-RK3328-CC17K34K51K68K85KSE +/- 56.81, N = 3SE +/- 64.76, N = 3SE +/- 112.24, N = 3SE +/- 29.83, N = 3SE +/- 143.40, N = 3SE +/- 11.58, N = 3SE +/- 28.58, N = 3SE +/- 61.95, N = 3SE +/- 115.45, N = 3SE +/- 103.97, N = 4SE +/- 32.74, N = 3SE +/- 17.10, N = 3SE +/- 9.36, N = 3SE +/- 57.37, N = 3SE +/- 8.74, N = 3775073150616079144271330999519910664065266059550251994555385629771. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingClearFog-ITXSocionext DeveloperboxJetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorTinker BoardODROID-C2AML-S905X-CC Le PotatoRaspberry Pi 3 B+Pine64 1GBRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5Raspberry Pi 2 BALL-H3-CC H3ALL-H3-CC H2+50100150200250SE +/- 0.29, N = 3SE +/- 0.07, N = 3SE +/- 0.07, N = 3SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.05, N = 3SE +/- 0.25, N = 4SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3239.5089.2845.0530.4030.3627.8023.0720.3016.8215.7315.6614.1511.9110.9410.8310.731. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestClearFog-ITXSocionext DeveloperboxJetson TX2Jetson TX1Atomic Pi - Performance GovernorAtomic Pi - StockTinker BoardBanana Pi M3AML-S905X-CC Le PotatoODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 BRaspberry Pi 3 B+ODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B5K10K15K20K25KSE +/- 59.12, N = 3SE +/- 58.09, N = 3SE +/- 11.46, N = 3SE +/- 28.68, N = 3SE +/- 6.33, N = 3SE +/- 6.56, N = 3SE +/- 36.57, N = 3SE +/- 43.13, N = 9SE +/- 4.16, N = 3SE +/- 17.25, N = 3SE +/- 0.67, N = 3SE +/- 3.84, N = 3SE +/- 16.51, N = 3SE +/- 13.74, N = 3SE +/- 1.20, N = 3SE +/- 1.45, N = 3SE +/- 8.84, N = 323079936856504526358435623472265422092198195118631796147713011197116211251. (CXX) g++ options: -pipe -lpthread

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETClearFog-ITXJetson TX2Jetson TX1Atomic Pi - StockTinker BoardAtomic Pi - Performance GovernorODROID-C2Firefly ROC-RK3328-CCPine64 1GBRaspberry Pi 3 B+Socionext DeveloperboxRaspberry Pi 3 BODROID-C1+Banana Pi M3Raspberry Pi 2 BAML-S905X-CC Le PotatoALL-H3-CC H5200K400K600K800K1000KSE +/- 14685.04, N = 3SE +/- 2540.60, N = 3SE +/- 2915.59, N = 3SE +/- 860.84, N = 3SE +/- 4435.65, N = 3SE +/- 4332.49, N = 4SE +/- 777.10, N = 3SE +/- 3573.20, N = 6SE +/- 3541.46, N = 3SE +/- 1090.67, N = 3SE +/- 2599.96, N = 3SE +/- 1229.44, N = 3SE +/- 1992.94, N = 12SE +/- 1833.04, N = 3SE +/- 1911.33, N = 3SE +/- 263.42, N = 3SE +/- 336.63, N = 3900307660813484688355202326351316114271547265608255546240761235721213067167346124215113111102953547791. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETClearFog-ITXJetson TX2Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorTinker BoardODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxPine64 1GBRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C1+Banana Pi M3AML-S905X-CC Le PotatoRaspberry Pi 2 BALL-H3-CC H5130K260K390K520K650KSE +/- 20955.92, N = 3SE +/- 436.19, N = 3SE +/- 3890.46, N = 3SE +/- 381.07, N = 3SE +/- 2194.75, N = 3SE +/- 2798.54, N = 3SE +/- 2273.51, N = 3SE +/- 335.35, N = 3SE +/- 368.39, N = 3SE +/- 1081.64, N = 3SE +/- 677.69, N = 3SE +/- 881.60, N = 3SE +/- 1526.07, N = 5SE +/- 1043.53, N = 3SE +/- 405.28, N = 3SE +/- 744.95, N = 3SE +/- 313.11, N = 3600831432278333535251827250331218747194581189623160053159810150337131764100561798817152567210379271. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterJetson TX1ClearFog-ITXTinker BoardAtomic Pi - Performance GovernorFirefly ROC-RK3328-CCODROID-C2Socionext DeveloperboxRaspberry Pi 3 B+AML-S905X-CC Le PotatoAtomic Pi - StockODROID-C1+Raspberry Pi 3 BJetson TX2ALL-H3-CC H3ALL-H3-CC H2+Pine64 1GBALL-H3-CC H5Raspberry Pi 2 BBanana Pi M30.00780.01560.02340.03120.039SE +/- 0.00001414, N = 3SE +/- 0.00000292, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00000939, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00001616, N = 3SE +/- 0.00001488, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00008543, N = 3SE +/- 0.00010617, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00012375, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001117, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00021832, N = 3SE +/- 0.00011530, N = 30.002358690.002531590.004280810.004873080.005147610.005511930.006588400.007429010.007760800.007875700.008142310.008420840.009870310.010109650.010121650.010257860.010577180.013451550.03473245

Tinymembench

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetClearFog-ITXJetson TX2Jetson TX1Socionext DeveloperboxFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoTinker BoardODROID-C2Pine64 1GBAtomic Pi - Performance GovernorAtomic Pi - StockODROID-C1+ALL-H3-CC H3ALL-H3-CC H2+ALL-H3-CC H5Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BBanana Pi M33K6K9K12K15K14753139131037473597336553541923604309329712963288122782277219318711738117710641. (CC) gcc options: -O2 -lm

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsClearFog-ITXJetson TX2Jetson TX1Tinker BoardAtomic Pi - Performance GovernorAtomic Pi - StockODROID-C2Firefly ROC-RK3328-CCSocionext DeveloperboxRaspberry Pi 3 B+Pine64 1GBAML-S905X-CC Le PotatoRaspberry Pi 3 BODROID-C1+ALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Raspberry Pi 2 B20406080100SE +/- 0.08, N = 3SE +/- 0.20, N = 3SE +/- 0.67, N = 12SE +/- 0.68, N = 12SE +/- 0.43, N = 3SE +/- 0.43, N = 3SE +/- 1.18, N = 12SE +/- 0.91, N = 12SE +/- 0.01, N = 3SE +/- 1.49, N = 12SE +/- 0.83, N = 3SE +/- 0.94, N = 12SE +/- 1.07, N = 3SE +/- 0.83, N = 12SE +/- 1.24, N = 12SE +/- 1.30, N = 12SE +/- 0.78, N = 3SE +/- 1.28, N = 1214.3617.5723.6626.0630.7030.8438.9940.0446.3751.8452.6454.4157.1969.2377.1987.3791.8397.321. ClearFog-ITX: git version 2.20.12. Jetson TX2: git version 2.7.43. Jetson TX1: git version 2.7.44. Tinker Board: git version 2.11.05. Atomic Pi - Performance Governor: git version 2.17.16. Atomic Pi - Stock: git version 2.17.17. ODROID-C2: git version 2.17.18. Firefly ROC-RK3328-CC: git version 2.17.19. Socionext Developerbox: git version 2.17.110. Raspberry Pi 3 B+: git version 2.11.011. Pine64 1GB: git version 2.7.412. AML-S905X-CC Le Potato: git version 2.11.013. Raspberry Pi 3 B: git version 2.11.014. ODROID-C1+: git version 2.7.415. ALL-H3-CC H5: git version 2.11.016. ALL-H3-CC H3: git version 2.17.117. ALL-H3-CC H2+: git version 2.17.118. Raspberry Pi 2 B: git version 2.11.0

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteSocionext DeveloperboxClearFog-ITXJetson TX2Jetson TX1Atomic Pi - Performance GovernorTinker BoardAtomic Pi - StockODROID-C2AML-S905X-CC Le PotatoPine64 1GBRaspberry Pi 3 BODROID-C1+Firefly ROC-RK3328-CCRaspberry Pi 3 B+Raspberry Pi 2 B9001800270036004500SE +/- 1.88, N = 3SE +/- 270.79, N = 3SE +/- 17.07, N = 3SE +/- 11.36, N = 3SE +/- 17.27, N = 3SE +/- 34.75, N = 12SE +/- 3.78, N = 3SE +/- 26.05, N = 12SE +/- 2.18, N = 3SE +/- 3.93, N = 3SE +/- 6.52, N = 12SE +/- 9.10, N = 12SE +/- 8.44, N = 12SE +/- 1.99, N = 6SE +/- 1.32, N = 341663089179312221150114211407196034564093452631441331. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 September 2018 15:59 by user pi.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

Atomic Pi

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 24 May 2019 14:27 by user atomicpi.

Atomic Pi - Stock

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 24 May 2019 14:28 by user atomicpi.

Atomic Pi - Performance Governor

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON MF-001 (MFC1AM12 BIOS), Chipset: Intel Atom/Celeron/Pentium, Memory: 2048MB, Disk: 16GB M52516, Graphics: Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz), Monitor: DELL P2312H, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.15.18-dli (x86_64), Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 27 May 2019 11:32 by user atomicpi.

ClearFog-ITX

Processor: ARMv8 Cortex-A72 @ 2.00GHz (16 Cores), Motherboard: SolidRun LX2160A COM type 7 module, Memory: 14336MB, Disk: 250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064

OS: Ubuntu 19.04, Kernel: 4.14.83-dirty (aarch64), Compiler: GCC 8.3.0, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: qoriq_cpufreq performance
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 31 May 2019 09:44 by user jonatsolidrun.