Various ARM Linux Benchmarks - Spetember 2018

ARM Workstation vs SBC

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1905313-JONA-190527343
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 8 Tests
Compression Tests 2 Tests
CPU Massive 14 Tests
Creator Workloads 6 Tests
Database Test Suite 2 Tests
Encoding 3 Tests
Common Kernel Benchmarks 2 Tests
Multi-Core 8 Tests
Programmer / Developer System Benchmarks 3 Tests
Python 2 Tests
Renderers 3 Tests
Server 4 Tests
Server CPU Tests 8 Tests
Single-Threaded 8 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
Atomic Pi
May 24 2019
 
Atomic Pi - Stock
May 24 2019
  4 Hours, 48 Minutes
Atomic Pi - Performance Governor
May 27 2019
  4 Hours, 31 Minutes
ClearFog-ITX
May 31 2019
  1 Hour, 40 Minutes
Invert Hiding All Results Option
  7 Hours, 10 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H2+

Changed Memory to 493MB.

Changed Disk to 32GB SC32G.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Atomic Pi

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Atomic Pi - Stock

Atomic Pi - Performance Governor

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON MF-001 (MFC1AM12 BIOS), Chipset: Intel Atom/Celeron/Pentium, Memory: 2048MB, Disk: 16GB M52516, Graphics: Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz), Monitor: DELL P2312H, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.15.18-dli (x86_64), Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

ClearFog-ITX

Processor: ARMv8 Cortex-A72 @ 2.00GHz (16 Cores), Motherboard: SolidRun LX2160A COM type 7 module, Memory: 14336MB, Disk: 250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064

OS: Ubuntu 19.04, Kernel: 4.14.83-dirty (aarch64), Compiler: GCC 8.3.0, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: qoriq_cpufreq performance
Python Notes: Python 2.7.16 + Python 3.7.3

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskGraphicsAudioMonitorChipsetNetworkOSKernelCompilerFile-SystemScreen ResolutionDesktopDisplay ServerDisplay DriverVulkanSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic PiAtomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITXUnknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.0ext41920x1080ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3927MB32GB GB2MWBCM2708Raspbian 9.44.14.62-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.14.14.50-v7+ (armv7l)ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34NVIDIA TEGRADELL P2415QUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5X Server 1.18.4NVIDIA 1.0.0GCC 5.4.0 201606093840x2160ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.2927MB32GB GB1QTBCM2708Raspbian 9.44.14.62-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 20170516656x416Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)Acer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161920x1080AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)GCC 5.4.0 20160609Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC2048MB32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)LXDEGCC 7.3.01920x1080p60Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GRaspbian 9.44.14.53-00653-gc01abe8ba6bc (aarch64)X Server 1.19.2GCC 6.3.0 201705161920x1200ARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H532GB GB1QT4.18.0-rc3-gfc36def997cf-dirty (aarch64)ARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H31024MBUbuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.01920x1080493MB32GB SC32GVE228ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i2048MB32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)LXDEX Server 1.18.4GCC 4.9.21280x720ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM MaliUbuntu 16.043.10.107-190 (armv7l)GCC 5.4.0 201606091920x2160ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRA4.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.81920x1200Intel Atom x5-Z8350 @ 1.92GHz (4 Cores)AAEON MF-001 (MFC1AM12 BIOS)Intel Atom/Celeron/Pentium2048MB16GB M52516Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz)DELL P2312HRealtek RTL8111/8168/8411Ubuntu 18.044.15.18-dli (x86_64)X Server 1.19.6modesetting 1.19.6GCC 7.4.01920x1080ARMv8 Cortex-A72 @ 2.00GHz (16 Cores)SolidRun LX2160A COM type 7 module14336MB250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064Ubuntu 19.044.14.83-dirty (aarch64)GCC 8.3.0OpenBenchmarking.orgCompiler Details- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Atomic Pi: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Atomic Pi - Stock: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Atomic Pi - Performance Governor: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- ClearFog-ITX: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -vDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rwPython Details- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Jetson TX2: Python 2.7.12 + Python 3.5.2- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- Banana Pi M3: Python 2.7.9 + Python 3.4.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- Jetson TX1: Python 2.7.12 + Python 3.5.2- Atomic Pi: Python 2.7.15rc1 + Python 3.6.7- Atomic Pi - Stock: Python 2.7.15rc1 + Python 3.6.7- Atomic Pi - Performance Governor: Python 2.7.15rc1 + Python 3.6.7- ClearFog-ITX: Python 2.7.16 + Python 3.7.3Processor Details- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- ODROID-C2: Scaling Governor: meson_cpufreq performance- Tinker Board: Scaling Governor: cpufreq-dt interactive- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- ODROID-C1+: Scaling Governor: meson_cpufreq performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Atomic Pi: Scaling Governor: intel_pstate powersave- Atomic Pi - Stock: Scaling Governor: intel_pstate powersave- Atomic Pi - Performance Governor: Scaling Governor: intel_pstate performance- ClearFog-ITX: Scaling Governor: qoriq_cpufreq performanceDisk Mount Options Details- Raspberry Pi 3 B+: data=ordered,noatime,rw- Raspberry Pi 2 B: data=ordered,noatime,rw- Jetson TX2: data=ordered,relatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Tinker Board: data=ordered,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024Security Details- Atomic Pi, Atomic Pi - Stock, Atomic Pi - Performance Governor: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Various ARM Linux Benchmarks - Spetember 2018encode-flac: WAV To FLACpybench: Total For Average Test Timesphpbench: PHP Benchmark Suitescikit-learn: aobench: 2048 x 2048 - Total Timetinymembench: Standard Memcpyperl-benchmark: Pod2htmlencode-mp3: WAV To MP3hint: FLOATc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19x264: H.264 Video Encodingpgbench: Buffer Test - Normal Load - Read Onlyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingcompress-7zip: Compress Speed Testredis: GETredis: SETperl-benchmark: Interpretergit: Time To Complete Common Git Commandspgbench: Buffer Test - Normal Load - Read WriteSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic PiAtomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX390.76193863892289940015431.57088061406.394415037639113393112.413150689.2893682357211600530.0065884046.374166336.07209234016578529012881.11833973301.9857957193207411138672.09652616.8217962407611503370.0074290151.84144534.59379072083623286679562.46504575514.11359526604375189713151.10385610.941125113111672100.0134515597.3213365.15535713317513437980.4874690495.911039880876754551442756506608134322780.0098703117.571793387.09243493442084433312971.29447902352.6650009135235715439342.03664015.6618632130671317640.0084208457.19409263.28127755917666426016881.11893361266.806767326115375998222.89605923.0721982715471945810.0055119338.99719122.0592566639847419215020.69415680145.598075532510485734.421330927.8034723263512187470.0042808126.061142352.20201963698885335213771.40449621350.1950185204234294310342.12455515.732555461598100.0102578652.64456293.37140305380265028915661.31366123296.206112961217739348482.12297719512656081896230.0051476140.04263334.63228763785595428220951.49377750300.96591213881755891808550220.302209102953715250.0077608054.41603566.384068021324151549113392.57579869518.513400372030881623121911.91130154779379270.0105771877.19537.42293892664222467009122.26615629536.62346403334156194013831.1410.8311970.0101096587.37537.2729409266226988272.27366223535.90346378804166197514071.1310.7311620.0101216591.83279.9215990182022214617382.59638113266.3567935371166987610692654124215798810.03473245344.23237733405216314579281.73162418331.0155729881272015919781.46519914.1514771673461005610.0081423169.2334578.86634811197943416538620.60071034113.14883813138514014415.961607945.0545264846883335350.0023586923.66122264.18707110337438327326270.89794910176.077375585415263428044.28991030.4035623552022518270.0078757030.84114064.17706010353738227327720.90904345175.857373602715263418024.30995130.3635843161142503310.0048730830.70115059.00427315669030.3592.6048770.4189956290.6914148865411562.0835629.2777507239.50230799003076008310.0025315914.363089OpenBenchmarking.org

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX120240360480600SE +/- 0.03, N = 5SE +/- 0.93, N = 5SE +/- 2.05, N = 5SE +/- 0.17, N = 5SE +/- 0.55, N = 5SE +/- 1.35, N = 5SE +/- 1.28, N = 5SE +/- 0.17, N = 5SE +/- 1.63, N = 5SE +/- 0.86, N = 5SE +/- 0.29, N = 5SE +/- 0.68, N = 5SE +/- 0.65, N = 5SE +/- 1.17, N = 5SE +/- 1.72, N = 5SE +/- 0.39, N = 5SE +/- 0.41, N = 22SE +/- 0.74, N = 5SE +/- 0.03, N = 5390.76336.07534.5965.15387.09263.28122.05352.20293.37334.63566.38537.42537.27279.92344.2378.8664.1864.1759.00-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX9K18K27K36K45KSE +/- 13.74, N = 3SE +/- 85.92, N = 3SE +/- 51.49, N = 3SE +/- 16.86, N = 3SE +/- 25.83, N = 3SE +/- 167.68, N = 3SE +/- 16.41, N = 3SE +/- 32.08, N = 3SE +/- 46.73, N = 3SE +/- 50.54, N = 3SE +/- 54.78, N = 3SE +/- 35.56, N = 3SE +/- 50.90, N = 3SE +/- 60.92, N = 3SE +/- 37.03, N = 3SE +/- 21.11, N = 3SE +/- 6.89, N = 3SE +/- 11.67, N = 3SE +/- 1.76, N = 319386209233790753572434912775925620196140302287640680293892940915990237736348707170604273

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlySocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoODROID-C1+Jetson TX15010015020025026.26164.0526.23189.7796.25234.1159.54122.27106.1033.711. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX30K60K90K120K150KSE +/- 16.44, N = 3SE +/- 65.58, N = 3SE +/- 141.51, N = 3SE +/- 871.71, N = 3SE +/- 58.48, N = 3SE +/- 287.89, N = 3SE +/- 222.05, N = 3SE +/- 17.90, N = 3SE +/- 238.66, N = 3SE +/- 52.26, N = 3SE +/- 7.80, N = 3SE +/- 27.36, N = 3SE +/- 26.01, N = 3SE +/- 84.14, N = 3SE +/- 82.63, N = 3SE +/- 1075.34, N = 3SE +/- 38.84, N = 3SE +/- 22.01, N = 3SE +/- 1282.46, N = 33892240165208361331753442059176663983698853802378552132426642266221820234052111979103374103537156690

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX10.0180.0360.0540.0720.090.010.050.060.050.080.040.040.050.030.011. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. Tinker Board: $56.85 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. ALL-H3-CC H3: $30.00 reported cost.8. ALL-H3-CC H2+: $25.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BRaspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX5001000150020002500SE +/- 0.74, N = 3SE +/- 1.26, N = 3SE +/- 7.83, N = 3SE +/- 0.80, N = 3SE +/- 1.01, N = 3SE +/- 1.43, N = 3SE +/- 0.51, N = 3SE +/- 1.06, N = 3SE +/- 1.54, N = 3SE +/- 1.25, N = 3SE +/- 1.01, N = 3SE +/- 0.29, N = 3SE +/- 2.27, N = 3SE +/- 1.69, N = 3SE +/- 0.66, N = 3SE +/- 0.27, N = 3SE +/- 0.14, N = 3899.00785.002328.00844.00664.00474.00853.00650.00954.001515.002246.00221.001631.00434.00383.00382.0030.35

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1100K200K300K400K500K469200.0082503.72371243.2582471.4396754.1559578.8088650.0078975.00123520.00124680.00104150.00133280.00405918.491. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoODROID-C1+Jetson TX15101520253.473.623.2611.6911.4220.095.2613.407.042.561. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ODROID-C1+: $49.00 reported cost.10. Jetson TX1: $476.99 reported cost.

7-Zip Compression

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX114284256707.8145.1510.2753.2434.9261.0739.0249.0932.5339.9046.4830.149.491. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX150300450600750SE +/- 0.28, N = 3SE +/- 3.87, N = 6SE +/- 0.55, N = 3SE +/- 0.07, N = 3SE +/- 0.44, N = 3SE +/- 0.05, N = 3SE +/- 0.05, N = 3SE +/- 0.24, N = 3SE +/- 0.18, N = 3SE +/- 0.12, N = 3SE +/- 1.23, N = 3SE +/- 0.21, N = 3SE +/- 0.03, N = 3SE +/- 5.31, N = 3SE +/- 2.17, N = 3SE +/- 0.11, N = 3SE +/- 0.59, N = 3SE +/- 0.38, N = 3SE +/- 0.02, N = 3400.00290.00667.00134.00333.00260.00192.00352.00289.00282.00491.00700.00698.00461.00457.00165.00273.00273.0092.601. (CC) gcc options: -lm -O3

TTSIOD 3D Renderer

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2Tinker BoardAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX10.11030.22060.33090.44120.55150.070.420.450.370.490.450.300.360.430.290.091. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. Tinker Board: $56.85 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H5: $40.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ALL-H3-CC H2+: $25.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1100K200K300K400K500K468912.0013368.8635831.8513544.2816573.486938.5414668.5015058.3522655.2016122.6013431.7516867.2737615.431. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpySocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX10002000300040005000154312889563798129716881502137715662095133991282773892838622627277248771. (CC) gcc options: -O2 -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX0.58421.16841.75262.33682.921SE +/- 0.00683757, N = 3SE +/- 0.01837187, N = 4SE +/- 0.04245993, N = 9SE +/- 0.00383151, N = 3SE +/- 0.00473476, N = 3SE +/- 0.02171209, N = 3SE +/- 0.00065111, N = 3SE +/- 0.00496104, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00368669, N = 3SE +/- 0.01160841, N = 3SE +/- 0.00913039, N = 3SE +/- 0.00906752, N = 3SE +/- 0.02860806, N = 3SE +/- 0.06022970, N = 6SE +/- 0.00322779, N = 3SE +/- 0.00162921, N = 3SE +/- 0.00485288, N = 3SE +/- 0.00119166, N = 31.570880611.118339732.465045750.487469041.294479021.118933610.694156801.404496211.313661231.493777502.575798692.266156292.273662232.596381131.731624180.600710340.897949100.909043450.41899562

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Socionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1100K200K300K400K500K487668.0012012.7652749.5412339.5716795.068276.7914810.0013543.2020740.4016098.6013397.5016219.4953966.651. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX120240360480600SE +/- 0.07, N = 3SE +/- 0.49, N = 3SE +/- 0.40, N = 3SE +/- 0.11, N = 3SE +/- 0.10, N = 3SE +/- 2.55, N = 3SE +/- 0.06, N = 3SE +/- 0.11, N = 3SE +/- 0.24, N = 3SE +/- 0.09, N = 3SE +/- 0.09, N = 3SE +/- 0.28, N = 3SE +/- 0.29, N = 3SE +/- 2.53, N = 3SE +/- 0.99, N = 3SE +/- 0.15, N = 3SE +/- 0.21, N = 3SE +/- 0.11, N = 3SE +/- 0.07, N = 3406.39301.98514.1195.91352.66266.80145.59350.19296.20300.96518.51536.62535.90266.35331.01113.14176.07175.8590.69-lncurses1. (CC) gcc options: -lm

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX140K80K120K160K200K159600.0044275.1453989.5737707.0546700.0040095.0064920.0058200.0049375.0077959.00191272.991. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. ALL-H3-CC H5: $40.00 reported cost.8. ALL-H3-CC H3: $30.00 reported cost.9. ALL-H3-CC H2+: $25.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX14008001200160020001885.0644.49268.1045.2970.4439.4665.6867.22103.0367.9856.8484.85286.531. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX15M10M15M20M25M23263200.00832316.942946296.43851971.51804186.25526203.60701500.001029420.001627200.00881670.00735225.001164877.003027932.521. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1100K200K300K400K500K480000.0011536.2073698.6611651.6716367.0010915.2014450.0012690.0019640.0021000.0017450.0022393.0078703.351. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ODROID-C1+Jetson TX1200K400K600K800K1000K1078800.0031227.3029531.5641798.8026946.9032500.0042930.0060600.0067380.0079919.00207013.661. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. Tinker Board: $56.85 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. AML-S905X-CC Le Potato: $45.00 reported cost.8. ALL-H3-CC H5: $40.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX30M60M90M120M150MSE +/- 3286.77, N = 3SE +/- 271590.74, N = 3SE +/- 113633.28, N = 3SE +/- 187708.64, N = 3SE +/- 73922.97, N = 3SE +/- 19085.92, N = 3SE +/- 3664.18, N = 3SE +/- 27122.74, N = 3SE +/- 19531.90, N = 3SE +/- 7375.88, N = 3SE +/- 9829.94, N = 3SE +/- 1696.71, N = 3SE +/- 1621.71, N = 3SE +/- 132627.22, N = 3SE +/- 359364.97, N = 3SE +/- 466387.18, N = 3SE +/- 25305.03, N = 3SE +/- 33051.09, N = 3SE +/- 25533.70, N = 344150376579571933595266010398808750009135676732618075532550185204611296125912138834003720346403333463788067935371557298818838131373755854737360271414886541. (CC) gcc options: -O3 -march=native -lm

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1300K600K900K1200K1500K36791.981456943.01189072.691429240.781075031.951420498.241222592.241313808.62850093.001154677.771385515.201137344.51185289.661. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX9001800270036004500SE +/- 1.67, N = 3SE +/- 2.67, N = 3SE +/- 6.73, N = 3SE +/- 60.69, N = 9SE +/- 16.16, N = 3SE +/- 0.45, N = 3SE +/- 5.86, N = 3SE +/- 3.98, N = 3SE +/- 10.58, N = 3SE +/- 2.44, N = 3SE +/- 5.10, N = 3SE +/- 1.59, N = 3SE +/- 6.17, N = 3SE +/- 22.18, N = 3SE +/- 5.34, N = 3SE +/- 60.87, N = 9SE +/- 0.55, N = 3SE +/- 0.61, N = 3SE +/- 3.80, N = 33912074437567523571537104823421773175530884156416616692720851152615261151. (CC) gcc options: -lm -lpthread -O3

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX112K24K36K48K60K55644.002062.209663.322001.082454.421481.512002.002448.453087.602621.102295.753392.2711285.581. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpySocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX111223344551.2932.386.9137.0726.8126.4231.3246.5633.4830.4033.0818.948.101. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX13006009001200150032.441009.68242.14983.71940.051167.951076.04841.22533.10888.071064.88694.94234.761. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Socionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1200K400K600K800K1000K1117200.0034489.26250245.4532680.6651744.9032575.0542400.0036360.0048760.0041490.0035175.0047922.00210352.591. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX12468107.910.305.430.290.350.240.260.350.420.300.250.401.131. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.12. ODROID-C1+: $49.00 reported cost.13. Jetson TX1: $476.99 reported cost.

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BRaspberry Pi 3 BODROID-C2Pine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX400800120016002000SE +/- 0.13, N = 3SE +/- 11.17, N = 3SE +/- 5.62, N = 3SE +/- 21.17, N = 5SE +/- 3.10, N = 3SE +/- 14.59, N = 5SE +/- 15.71, N = 3SE +/- 4.98, N = 3SE +/- 19.70, N = 9SE +/- 15.03, N = 3SE +/- 21.10, N = 3SE +/- 13.52, N = 5SE +/- 31.20, N = 3SE +/- 15.34, N = 9SE +/- 0.13, N = 3SE +/- 0.15, N = 3SE +/- 0.28, N = 3133.001113.001897.001543.00599.00943.00934.00891.001623.001940.001975.00876.001591.00401.00342.00341.0062.081. (CXX) g++ options: -O3 -lpthread

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ODROID-C1+Jetson TX113002600390052006500196.436052.311201.506089.374313.695740.565312.162287.841369.483415.221016.141. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX30060090012001500SE +/- 2.72, N = 3SE +/- 0.57, N = 3SE +/- 6.35, N = 3SE +/- 0.02, N = 3SE +/- 0.31, N = 3SE +/- 1.06, N = 3SE +/- 0.74, N = 3SE +/- 0.98, N = 3SE +/- 2.33, N = 3SE +/- 1.29, N = 3SE +/- 1.72, N = 3SE +/- 0.40, N = 3SE +/- 1.50, N = 3SE +/- 3.00, N = 3SE +/- 6.01, N = 3SE +/- 1.94, N = 3SE +/- 0.75, N = 3SE +/- 1.61, N = 3SE +/- 0.94, N = 3931867131545593482257310348488081219138314071069978441804802356-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETSocionext DeveloperboxRaspberry Pi 3 B+Jetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ODROID-C1+Jetson TX18001600240032004000133.383779.21785.973765.763091.043847.793792.461589.44948.182052.27699.251. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Jetson TX2: $549.99 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. Tinker Board: $56.85 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ODROID-C1+: $49.00 reported cost.11. Jetson TX1: $476.99 reported cost.

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BRaspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX714212835SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.05, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.22, N = 312.412.091.102.032.894.422.122.121.141.131.465.964.284.3029.27-lavformat -lavcodec -lavutil -lswscale -m64 -O3 -ffast-math -std=gnu99 -fPIC -fomit-frame-pointer -fno-tree-vectorize-lavformat -lavcodec -lavutil -lswscale -m64 -O3 -ffast-math -std=gnu99 -fPIC -fomit-frame-pointer -fno-tree-vectorize1. (CC) gcc options: -ldl -lm -lpthread

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlySocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX17K34K51K68K85KSE +/- 64.76, N = 3SE +/- 115.45, N = 3SE +/- 57.37, N = 3SE +/- 29.83, N = 3SE +/- 61.95, N = 3SE +/- 103.97, N = 4SE +/- 143.40, N = 3SE +/- 9.36, N = 3SE +/- 8.74, N = 3SE +/- 32.74, N = 3SE +/- 17.10, N = 3SE +/- 112.24, N = 3SE +/- 28.58, N = 3SE +/- 11.58, N = 3SE +/- 56.81, N = 3315066526385614427664060591330945552977550251991607999109951775071. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BRaspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX50100150200250SE +/- 0.07, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.25, N = 4SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.05, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.07, N = 3SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.29, N = 389.2816.8210.9415.6623.0727.8015.7320.3011.9110.8310.7314.1545.0530.4030.36239.501. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX5K10K15K20K25KSE +/- 58.09, N = 3SE +/- 16.51, N = 3SE +/- 8.84, N = 3SE +/- 11.46, N = 3SE +/- 3.84, N = 3SE +/- 17.25, N = 3SE +/- 36.57, N = 3SE +/- 0.67, N = 3SE +/- 4.16, N = 3SE +/- 1.20, N = 3SE +/- 1.45, N = 3SE +/- 43.13, N = 9SE +/- 13.74, N = 3SE +/- 28.68, N = 3SE +/- 6.56, N = 3SE +/- 6.33, N = 3SE +/- 59.12, N = 393681796112556501863219834721951220913011197116226541477452635623584230791. (CXX) g++ options: -pipe -lpthread

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX200K400K600K800K1000KSE +/- 2599.96, N = 3SE +/- 1090.67, N = 3SE +/- 1911.33, N = 3SE +/- 2540.60, N = 3SE +/- 1229.44, N = 3SE +/- 777.10, N = 3SE +/- 4435.65, N = 3SE +/- 3541.46, N = 3SE +/- 3573.20, N = 6SE +/- 263.42, N = 3SE +/- 336.63, N = 3SE +/- 1833.04, N = 3SE +/- 1992.94, N = 12SE +/- 2915.59, N = 3SE +/- 860.84, N = 3SE +/- 4332.49, N = 4SE +/- 14685.04, N = 3235721240761113111660813213067271547326351255546265608102953547791242151673464846883552023161149003071. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX130K260K390K520K650KSE +/- 368.39, N = 3SE +/- 677.69, N = 3SE +/- 744.95, N = 3SE +/- 436.19, N = 3SE +/- 881.60, N = 3SE +/- 2273.51, N = 3SE +/- 2798.54, N = 3SE +/- 1081.64, N = 3SE +/- 335.35, N = 3SE +/- 405.28, N = 3SE +/- 313.11, N = 3SE +/- 1043.53, N = 3SE +/- 1526.07, N = 5SE +/- 3890.46, N = 3SE +/- 381.07, N = 3SE +/- 2194.75, N = 3SE +/- 20955.92, N = 3160053150337672104322781317641945812187471598101896237152537927798811005613335352518272503316008311. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX0.00780.01560.02340.03120.039SE +/- 0.00001488, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00021832, N = 3SE +/- 0.00012375, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00001616, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00011141, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00008543, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001117, N = 3SE +/- 0.00011530, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00001414, N = 3SE +/- 0.00010617, N = 3SE +/- 0.00000939, N = 3SE +/- 0.00000292, N = 30.006588400.007429010.013451550.009870310.008420840.005511930.004280810.010257860.005147610.007760800.010577180.010109650.010121650.034732450.008142310.002358690.007875700.004873080.00253159

Tinymembench

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX3K6K9K12K15K73591871117713913173836044192309373365535219322782277106428811037429632971147531. (CC) gcc options: -O2 -lm

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+ODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX20406080100SE +/- 0.01, N = 3SE +/- 1.49, N = 12SE +/- 1.28, N = 12SE +/- 0.20, N = 3SE +/- 1.07, N = 3SE +/- 1.18, N = 12SE +/- 0.68, N = 12SE +/- 0.83, N = 3SE +/- 0.91, N = 12SE +/- 0.94, N = 12SE +/- 1.24, N = 12SE +/- 1.30, N = 12SE +/- 0.78, N = 3SE +/- 0.83, N = 12SE +/- 0.67, N = 12SE +/- 0.43, N = 3SE +/- 0.43, N = 3SE +/- 0.08, N = 346.3751.8497.3217.5757.1938.9926.0652.6440.0454.4177.1987.3791.8369.2323.6630.8430.7014.361. Socionext Developerbox: git version 2.17.12. Raspberry Pi 3 B+: git version 2.11.03. Raspberry Pi 2 B: git version 2.11.04. Jetson TX2: git version 2.7.45. Raspberry Pi 3 B: git version 2.11.06. ODROID-C2: git version 2.17.17. Tinker Board: git version 2.11.08. Pine64 1GB: git version 2.7.49. Firefly ROC-RK3328-CC: git version 2.17.110. AML-S905X-CC Le Potato: git version 2.11.011. ALL-H3-CC H5: git version 2.11.012. ALL-H3-CC H3: git version 2.17.113. ALL-H3-CC H2+: git version 2.17.114. ODROID-C1+: git version 2.7.415. Jetson TX1: git version 2.7.416. Atomic Pi - Stock: git version 2.17.117. Atomic Pi - Performance Governor: git version 2.17.118. ClearFog-ITX: git version 2.20.1

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoODROID-C1+Jetson TX1Atomic Pi - StockAtomic Pi - Performance GovernorClearFog-ITX9001800270036004500SE +/- 1.88, N = 3SE +/- 1.99, N = 6SE +/- 1.32, N = 3SE +/- 17.07, N = 3SE +/- 6.52, N = 12SE +/- 26.05, N = 12SE +/- 34.75, N = 12SE +/- 3.93, N = 3SE +/- 8.44, N = 12SE +/- 2.18, N = 3SE +/- 9.10, N = 12SE +/- 11.36, N = 3SE +/- 3.78, N = 3SE +/- 17.27, N = 3SE +/- 270.79, N = 341661441331793409719114245626360334512221140115030891. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 September 2018 15:59 by user pi.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

Atomic Pi

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 24 May 2019 14:27 by user atomicpi.

Atomic Pi - Stock

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 24 May 2019 14:28 by user atomicpi.

Atomic Pi - Performance Governor

Processor: Intel Atom x5-Z8350 @ 1.92GHz (4 Cores), Motherboard: AAEON MF-001 (MFC1AM12 BIOS), Chipset: Intel Atom/Celeron/Pentium, Memory: 2048MB, Disk: 16GB M52516, Graphics: Intel Atom/Celeron/Pentium x5-E8000/J3xxx/N3xxx PCI Configuration Registers (500MHz), Monitor: DELL P2312H, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.04, Kernel: 4.15.18-dli (x86_64), Display Server: X Server 1.19.6, Display Driver: modesetting 1.19.6, Compiler: GCC 7.4.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7
Security Notes: KPTI + l1tf: Not affected + meltdown: Mitigation of PTI + spec_store_bypass: Not affected + spectre_v1: Mitigation of __user pointer sanitization + spectre_v2: Mitigation of Full generic retpoline

Testing initiated at 27 May 2019 11:32 by user atomicpi.

ClearFog-ITX

Processor: ARMv8 Cortex-A72 @ 2.00GHz (16 Cores), Motherboard: SolidRun LX2160A COM type 7 module, Memory: 14336MB, Disk: 250GB Samsung SSD 860 + 8GB SL08G + 63GB DF4064

OS: Ubuntu 19.04, Kernel: 4.14.83-dirty (aarch64), Compiler: GCC 8.3.0, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-libphobos --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: qoriq_cpufreq performance
Python Notes: Python 2.7.16 + Python 3.7.3

Testing initiated at 31 May 2019 09:44 by user jonatsolidrun.