Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86

Raspberry Pi 3 Model B Plus latest raspbian

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1904104-OBIY-190409245
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Disable Color Branding
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
View Logs
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 2 Model B
March 19 2018
 
Raspberry Pi 3 Model B
March 21 2018
 
Raspberry Pi 3 Model B Plus
March 21 2018
 
ASUS TinkerBoard
March 20 2018
 
ODROID-C2
March 21 2018
 
Pine A64
March 20 2018
 
Jetson TX1
March 21 2018
 
Jetson TX2
March 21 2018
 
Orange Pi PC v1.2
March 20 2018
 
Celeron N2820
March 20 2018
 
Celeron J3455
March 20 2018
 
Core i3 8100
March 20 2018
 
apu1d4
April 03 2019
  2 Hours, 12 Minutes
Raspberry Pi 2 Model B latest raspbian
April 09 2019
  3 Hours, 43 Minutes
Raspberry Pi 3 Model B Plus latest raspbian
April 09 2019
  2 Hours, 25 Minutes
Invert Behavior (Only Show Selected Data)
  34 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model B

Changed Processor to ARMv7 rev 4 @ 1.20GHz (4 Cores).

Changed Motherboard to BCM2835 Raspberry Pi 3 Model B Rev 1.2.

Raspberry Pi 3 Model B Plus

Changed Processor to ARMv7 rev 4 @ 1.40GHz (4 Cores).

Changed Motherboard to BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3.

ASUS TinkerBoard

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 8GB SD, Graphics: LLVMpipe, Monitor: VE228

OS: Debian 9.4, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits), Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

ODROID-C2

Processor: Unknown @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.14.79-108 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: meson_cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Pine A64

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 8GB SL08G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 3.10.96-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 24.2.1, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: __GL_PERFMON_MODE=1
Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.00GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: GP10B, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.15-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 27.1.0, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.2

Orange Pi PC v1.2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB GB2MW

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand
Python Notes: Python 2.7.3 + Python 3.2.3

Celeron N2820

Processor: Intel Celeron N2820 @ 2.40GHz (2 Cores), Motherboard: Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS), Chipset: Intel Atom Z36xxx/Z37xxx, Memory: 8192MB, Disk: 60GB OCZ VERTEX2, Graphics: Intel Bay Trail 1536MB (756MHz), Audio: Realtek ALC283, Monitor: DELL P2415Q, Network: Realtek RTL8111/8168/8411 + Intel Wireless 7260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.2 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 2048x1280

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Celeron J3455

Processor: Intel Celeron J3455 @ 2.30GHz (4 Cores), Motherboard: Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 8192MB, Disk: 127GB NT-128, Graphics: Intel HD 500 3072MB (750MHz), Audio: Realtek ALC1150, Monitor: DELL P2415Q, Network: Intel I211 Gigabit Connection + Intel Wireless 8260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.5 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Core i3 8100

Processor: Intel Core i3-8100 @ 3.60GHz (4 Cores), Motherboard: ASRock Z370M-ITX/ac (P1.20 BIOS), Chipset: Intel Device 3e1f, Memory: 8192MB, Disk: 60GB DREVO X1 SSD, Graphics: (1100MHz), Audio: Realtek ALC892, Network: Intel Connection + Intel Device 24fb

OS: Ubuntu 17.10, Kernel: 4.15.0-999-generic (x86_64) 20171231, Desktop: GNOME Shell 3.26.1, Compiler: GCC 8.0.1 20180319, File-System: ext4

Compiler Notes: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortran
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14 + Python 3.6.3

apu1d4

Processor: AMD G-T40E @ 1.00GHz (2 Cores), Motherboard: PC Engines apu1 v1.0 (v4.9.0.3 BIOS), Chipset: AMD Family 14h Root Complex, Memory: 4096MB, Disk: 16GB SATA SSD, Network: 3 x Realtek RTL8111/8168/8411

OS: Debian GNU/Linux 9, Kernel: 4.9.0-3-amd64 (x86_64), Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 2 Model B latest raspbian

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 923MB, Disk: 32GB SL32G, Graphics: BCM2708

OS: Raspbian 9.8, Kernel: 4.14.79-v7+ (armv7l), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model B Plus latest raspbian

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB SL32G, Graphics: BCM2708

OS: Raspbian 9.8, Kernel: 4.14.98-v7+ (armv7l), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86ProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDesktopDisplay ServerDisplay DriverOpenGLCompilerFile-SystemScreen ResolutionVulkanRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B PlusASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100apu1d4Raspberry Pi 2 Model B latest raspbianRaspberry Pi 3 Model B Plus latest raspbianARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1926MB32GB GB2MWVC4 V3D 2.1 1024MBVE228Raspbian 9.44.9.80-v7+ (armv7l)LXDE 0.9.3X Server 1.19.2modesetting 1.19.22.1 Mesa 13.0.6 Gallium 0.4GCC 6.3.0 20170516ext41920x1080ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.2ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB8GB SDLLVMpipeDebian 9.44.4.16-00006-g4431f98-dirty (armv7l)3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits)Unknown @ 1.54GHz (4 Cores)ODROID-C216GB SD16GUbuntu 16.043.14.79-108 (aarch64)MATE 1.12.1X Server 1.18.43.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits)GCC 5.4.0 20160609AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB8GB SL08G3.10.104 (aarch64)3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits)ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1DELL P2415Q3.10.96-tegra (aarch64)Unity 7.4.0X Server 1.18.3NVIDIA 24.2.14.5.01.0.8GCC 5.4.0 20160609 + CUDA 8.0ARMv8 rev 3 @ 2.00GHz (6 Cores)quill8192MB31GB 032G34GP10B4.4.15-tegra (aarch64)NVIDIA 27.1.0ARMv7 rev 5 @ 1.20GHz (3 Cores)sun8i1024MB32GB GB2MWRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720Intel Celeron N2820 @ 2.40GHz (2 Cores)Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS)Intel Atom Z36xxx/Z37xxx8192MB60GB OCZ VERTEX2Intel Bay Trail 1536MB (756MHz)Realtek ALC283DELL P2415QRealtek RTL8111/8168/8411 + Intel Wireless 7260Ubuntu 18.044.15.0-10-generic (x86_64)GNOME Shell 3.27.91modesetting 1.19.64.2 Mesa 18.0.0-rc4GCC 7.3.02048x1280Intel Celeron J3455 @ 2.30GHz (4 Cores)Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS)Intel Celeron N3350/Pentium127GB NT-128Intel HD 500 3072MB (750MHz)Realtek ALC1150Intel I211 Gigabit Connection + Intel Wireless 82604.5 Mesa 18.0.0-rc41920x1080Intel Core i3-8100 @ 3.60GHz (4 Cores)ASRock Z370M-ITX/ac (P1.20 BIOS)Intel Device 3e1f60GB DREVO X1 SSD(1100MHz)Realtek ALC892Intel Connection + Intel Device 24fbUbuntu 17.104.15.0-999-generic (x86_64) 20171231GNOME Shell 3.26.1GCC 8.0.1 20180319AMD G-T40E @ 1.00GHz (2 Cores)PC Engines apu1 v1.0 (v4.9.0.3 BIOS)AMD Family 14h Root Complex4096MB16GB SATA SSD3 x Realtek RTL8111/8168/8411Debian GNU/Linux 94.9.0-3-amd64 (x86_64)GCC 6.3.0 20170516ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1923MB32GB SL32GBCM2708Raspbian 9.84.14.79-v7+ (armv7l)X Server 1.19.21920x1080ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3927MB4.14.98-v7+ (armv7l)OpenBenchmarking.orgCompiler Details- Raspberry Pi 2 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 Model B Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ASUS TinkerBoard: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- ODROID-C2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine A64: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Orange Pi PC v1.2: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Celeron N2820: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Celeron J3455: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v- Core i3 8100: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortran- apu1d4: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic -v- Raspberry Pi 2 Model B latest raspbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 Model B Plus latest raspbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -vProcessor Details- Raspberry Pi 2 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B Plus: Scaling Governor: BCM2835 Freq ondemand- ASUS TinkerBoard: Scaling Governor: cpufreq-dt interactive- ODROID-C2: Scaling Governor: meson_cpufreq interactive- Pine A64: Scaling Governor: cpufreq-sunxi interactive- Jetson TX1: Scaling Governor: tegra interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- Orange Pi PC v1.2: Scaling Governor: cpufreq-sunxi ondemand- Celeron N2820: Scaling Governor: intel_pstate powersave- Celeron J3455: Scaling Governor: intel_pstate powersave- Core i3 8100: Scaling Governor: intel_pstate powersave- apu1d4: Scaling Governor: acpi-cpufreq ondemand- Raspberry Pi 2 Model B latest raspbian: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B Plus latest raspbian: Scaling Governor: BCM2835 Freq ondemandPython Details- Raspberry Pi 2 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B Plus: Python 2.7.13 + Python 3.5.3- ASUS TinkerBoard: Python 2.7.13 + Python 3.5.3- ODROID-C2: Python 2.7.12 + Python 3.5.2- Pine A64: Python 2.7.12 + Python 3.5.2- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- Orange Pi PC v1.2: Python 2.7.3 + Python 3.2.3- Celeron N2820: Python 2.7.14+ + Python 3.6.4+- Celeron J3455: Python 2.7.14+ + Python 3.6.4+- Core i3 8100: Python 2.7.14 + Python 3.6.3- apu1d4: Python 2.7.13 + Python 3.5.3- Raspberry Pi 2 Model B latest raspbian: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B Plus latest raspbian: Python 2.7.13 + Python 3.5.3Environment Details- Jetson TX1: __GL_PERFMON_MODE=1Security Details- Celeron N2820, Celeron J3455: KPTI + __user pointer sanitization + Full generic retpoline Protection

Raspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B PlusASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100apu1d4Raspberry Pi 2 Model B latest raspbianRaspberry Pi 3 Model B Plus latest raspbianLogarithmic Result OverviewPhoronix Test SuiteCacheBenchC-RayebizzyPHPBenchRedisStockfishGitPyBenchSciMarkPerl BenchmarksLAME MP3 EncodingAOBench

Raspberry Pi Model 3 B+ Benchmarks vs. ARM SBCs vs. x86scimark2: Compositescimark2: Monte Carloscimark2: Fast Fourier Transformscimark2: Sparse Matrix Multiplyscimark2: Dense LU Matrix Factorizationscimark2: Jacobi Successive Over-Relaxationcachebench: Readcachebench: Writeencode-mp3: WAV To MP3stockfish: Total Timeaobench: 2048 x 2048 - Total Timegraphics-magick: Resizingc-ray: Total Timenetperf: 192.168.1.55 - TCP Send File - 10 Secondsnetperf: 192.168.1.55 - TCP Stream - Client To Server - 10 Secondsnetperf: 192.168.1.55 - TCP Stream - Server To Client - 10 Secondsnetperf: 192.168.1.55 - UDP Stream - Server To Client - 10G - 10 Secondsopenssl: RSA 4096-bit Performancephpbench: PHP Benchmark Suiteredis: GETredis: SETebizzy: perl-benchmark: Pod2htmlperl-benchmark: Interpretergit: Time To Complete Common Git Commandspybench: Total For Average Test TimesRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B PlusASUS TinkerBoardODROID-C2Pine A64Jetson TX1Jetson TX2Orange Pi PC v1.2Celeron N2820Celeron J3455Core i3 8100apu1d4Raspberry Pi 2 Model B latest raspbianRaspberry Pi 3 Model B Plus latest raspbian25.6613.999.2619.5531.4754.0416572238513.4368581668.6019490.4593.5494.0593.5896.0225.77209521125596614945002.457806460.01265626106.883820041.7421.2813.8035.7253.3884.5217953013351.9836549333.7529239.9993.8994.0594.0096.0052.873468217866913109876221.340277810.0070159369.852438048.4524.8115.5641.0262.1098.7921023495301.7931658285.7133222.75321.61226.59322.32272.7829.774039224570715450881021.164408760.0061930165.7820841139.6640.9321.26112.89168.10355.1327358814145.6119893192.1255155.40938.85783.73939.90634.1985.4265900315326216013192000.713104430.0041059429.57927350.6128.1215.4639.5665.43104.4923083847271.7822868271.76187.5481.504742325630617201249141.130250500.0053356080.451512439.4521.5912.7531.6750.1281.0916962830350.3831725353.89277.1960.433698625818516147245561.420368210.01063092162.1520338155.3746.5636.92139.14205.74348.4926386439112.7013136165.5862102.57109.33110745511506342886229770.593429060.0118108324.896375167.3850.8337.09144.77228.98375.1928036956104.1311581144.907288.38120469644759413681318650.539501710.0082467119.36580831.9018.3411.3622.9439.7067.1521962983400.2252564654.65151421.6194.2094.1494.1996.1616.87133831078756424239182.139849660.0094156375.0524555125.9352.4425.79141.07158.34252.0119598770124.3812859190.1052252.32938.88787.16938.88959.5556.5714119242683833511951270.670225590.0033281121.525912195.3250.9344.83220.67191.92468.2519351027085.638852109.238671.83938.86786.12938.86959.56215.5720837573349960159391970.452045290.0040234315.874215562.39121.61201.86653.78813.801020.9030482525633.59338744.8718721.61941.39787.50941.30961.581056.93537078326442621583162114170.132023310.000951085.73144577.7022.3318.0568.8897.88181.365062523239.0127873361.2520440.8139.275948823459314690643721.260910880.0076656347.301274423.8413.928.9617.5329.1549.6516622233520.0367890667.6418492.0025.73210521073396559737932.502175230.01478614162.113812240.5921.3112.4233.4552.1583.6018333000352.4237524333.8327239.7058.333477921076312909867381.376565250.0115090962.7924380OpenBenchmarking.org

SciMark

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: CompositeCore i3 8100Celeron J3455Jetson TX2Jetson TX1ASUS TinkerBoardCeleron N2820apu1d4ODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64Orange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian120240360480600SE +/- 0.02, N = 3SE +/- 0.04, N = 3SE +/- 0.29, N = 3SE +/- 0.46, N = 3SE +/- 1.66, N = 3SE +/- 0.01, N = 3SE +/- 0.26, N = 3SE +/- 0.86, N = 3SE +/- 0.25, N = 3SE +/- 0.02, N = 3SE +/- 0.14, N = 3SE +/- 0.12, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.21, N = 3562.39195.32167.38155.37139.66125.9377.7050.6148.4541.7440.5939.4531.9025.6623.841. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Monte CarloCore i3 8100Celeron N2820Celeron J3455Jetson TX2Jetson TX1ASUS TinkerBoardODROID-C2Raspberry Pi 3 Model B Plusapu1d4Pine A64Raspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model BOrange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian306090120150SE +/- 0.08, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.05, N = 3SE +/- 0.16, N = 3SE +/- 0.50, N = 3SE +/- 0.39, N = 3SE +/- 0.09, N = 3SE +/- 0.04, N = 3SE +/- 0.08, N = 3SE +/- 0.04, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.07, N = 3121.6152.4450.9350.8346.5640.9328.1224.8122.3321.5921.3121.2818.3413.9913.921. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Fast Fourier TransformCore i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardapu1d4Raspberry Pi 3 Model B PlusODROID-C2Raspberry Pi 3 Model BPine A64Raspberry Pi 3 Model B Plus latest raspbianOrange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian4080120160200SE +/- 0.14, N = 3SE +/- 0.02, N = 3SE +/- 0.04, N = 3SE +/- 0.01, N = 3SE +/- 0.09, N = 3SE +/- 0.05, N = 3SE +/- 0.02, N = 3SE +/- 0.07, N = 3SE +/- 0.19, N = 3SE +/- 0.14, N = 3SE +/- 0.17, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.00, N = 3SE +/- 0.04, N = 3201.8644.8337.0936.9225.7921.2618.0515.5615.4613.8012.7512.4211.369.268.961. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Sparse Matrix MultiplyCore i3 8100Celeron J3455Jetson TX2Celeron N2820Jetson TX1ASUS TinkerBoardapu1d4Raspberry Pi 3 Model B PlusODROID-C2Raspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64Orange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian140280420560700SE +/- 0.06, N = 3SE +/- 0.14, N = 3SE +/- 0.11, N = 3SE +/- 0.01, N = 3SE +/- 0.78, N = 3SE +/- 3.08, N = 3SE +/- 0.88, N = 3SE +/- 0.22, N = 3SE +/- 0.70, N = 3SE +/- 0.04, N = 3SE +/- 0.11, N = 3SE +/- 0.31, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.10, N = 3653.78220.67144.77141.07139.14112.8968.8841.0239.5635.7233.4531.6722.9419.5517.531. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Dense LU Matrix FactorizationCore i3 8100Jetson TX2Jetson TX1Celeron J3455ASUS TinkerBoardCeleron N2820apu1d4ODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64Orange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian2004006008001000SE +/- 0.25, N = 3SE +/- 0.82, N = 3SE +/- 1.99, N = 3SE +/- 0.11, N = 3SE +/- 2.61, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 1.23, N = 3SE +/- 0.36, N = 3SE +/- 0.04, N = 3SE +/- 0.25, N = 3SE +/- 0.98, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.30, N = 3813.80228.98205.74191.92168.10158.3497.8865.4362.1053.3852.1550.1239.7031.4729.151. (CC) gcc options: -lm

OpenBenchmarking.orgMflops, More Is BetterSciMark 2.0Computational Test: Jacobi Successive Over-RelaxationCore i3 8100Celeron J3455Jetson TX2ASUS TinkerBoardJetson TX1Celeron N2820apu1d4ODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64Orange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian2004006008001000SE +/- 0.08, N = 3SE +/- 0.11, N = 3SE +/- 0.56, N = 3SE +/- 2.17, N = 3SE +/- 0.36, N = 3SE +/- 0.05, N = 3SE +/- 0.41, N = 3SE +/- 1.82, N = 3SE +/- 0.55, N = 3SE +/- 0.03, N = 3SE +/- 0.30, N = 3SE +/- 0.73, N = 3SE +/- 0.08, N = 3SE +/- 0.01, N = 3SE +/- 0.53, N = 31020.90468.25375.19355.13348.49252.01181.36104.4998.7984.5283.6081.0967.1554.0449.651. (CC) gcc options: -lm

CacheBench

OpenBenchmarking.orgMB/s, More Is BetterCacheBenchTest: ReadCore i3 8100Jetson TX2ASUS TinkerBoardJetson TX1ODROID-C2Orange Pi PC v1.2Raspberry Pi 3 Model B PlusCeleron N2820Celeron J3455Raspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model BPine A64Raspberry Pi 2 Model B latest raspbianRaspberry Pi 2 Model Bapu1d47001400210028003500SE +/- 3.20, N = 3SE +/- 45.23, N = 4SE +/- 7.48, N = 3SE +/- 3.38, N = 3SE +/- 2.22, N = 3SE +/- 20.69, N = 3SE +/- 4.05, N = 3SE +/- 38.99, N = 3SE +/- 0.36, N = 3SE +/- 33.80, N = 3SE +/- 1.76, N = 3SE +/- 14.20, N = 3SE +/- 5.23, N = 3SE +/- 6.59, N = 3SE +/- 0.07, N = 3304828032735263823082196210219591935183317951696166216575061. (CC) gcc options: -lrt

OpenBenchmarking.orgMB/s, More Is BetterCacheBenchTest: WriteCore i3 8100Celeron J3455ASUS TinkerBoardCeleron N2820Jetson TX2Jetson TX1ODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianOrange Pi PC v1.2Pine A64apu1d4Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian5K10K15K20K25KSE +/- 1.03, N = 3SE +/- 5.31, N = 3SE +/- 28.35, N = 3SE +/- 6.16, N = 3SE +/- 8.80, N = 3SE +/- 0.46, N = 3SE +/- 0.02, N = 3SE +/- 12.95, N = 3SE +/- 0.05, N = 3SE +/- 0.96, N = 3SE +/- 5.72, N = 3SE +/- 32.22, N = 3SE +/- 44.37, N = 9SE +/- 0.58, N = 3SE +/- 6.40, N = 3252561027088148770695664393847349530133000298328302523223822331. (CC) gcc options: -lrt

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Core i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardapu1d4ODROID-C2Raspberry Pi 3 Model B PlusPine A64Raspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianOrange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian110220330440550SE +/- 0.00, N = 3SE +/- 0.06, N = 3SE +/- 0.23, N = 3SE +/- 0.08, N = 3SE +/- 0.03, N = 3SE +/- 0.06, N = 3SE +/- 0.16, N = 3SE +/- 4.56, N = 3SE +/- 0.55, N = 3SE +/- 0.11, N = 3SE +/- 0.25, N = 3SE +/- 0.39, N = 3SE +/- 0.26, N = 3SE +/- 0.03, N = 3SE +/- 0.95, N = 333.5985.63104.13112.70124.38145.61239.01271.78301.79350.38351.98352.42400.22513.43520.031. (CC) gcc options: -lm

Stockfish

OpenBenchmarking.orgms, Fewer Is BetterStockfish 2014-11-26Total TimeCore i3 8100Celeron J3455Jetson TX2Celeron N2820Jetson TX1ASUS TinkerBoardODROID-C2apu1d4Raspberry Pi 3 Model B PlusPine A64Raspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianOrange Pi PC v1.2Raspberry Pi 2 Model B latest raspbianRaspberry Pi 2 Model B15K30K45K60K75KSE +/- 2.33, N = 3SE +/- 13.58, N = 3SE +/- 49.11, N = 3SE +/- 5.13, N = 3SE +/- 47.03, N = 3SE +/- 372.92, N = 6SE +/- 387.61, N = 4SE +/- 60.47, N = 3SE +/- 56.64, N = 3SE +/- 290.41, N = 3SE +/- 76.51, N = 3SE +/- 128.38, N = 3SE +/- 246.35, N = 3SE +/- 1090.06, N = 3SE +/- 845.64, N = 33387885211581128591313619893228682787331658317253654937524525646789068581-msse -msse3 -mpopcnt-msse -msse3 -mpopcnt1. (CXX) g++ options: -lpthread -fno-exceptions -fno-rtti -ansi -pedantic -O3 -flto

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeCore i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64apu1d4Orange Pi PC v1.2Raspberry Pi 2 Model B latest raspbianRaspberry Pi 2 Model B140280420560700SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.11, N = 3SE +/- 0.14, N = 3SE +/- 0.08, N = 3SE +/- 0.10, N = 3SE +/- 3.74, N = 3SE +/- 0.49, N = 3SE +/- 0.57, N = 3SE +/- 0.42, N = 3SE +/- 0.42, N = 3SE +/- 0.25, N = 3SE +/- 0.16, N = 3SE +/- 0.48, N = 3SE +/- 1.11, N = 344.87109.23144.90165.58190.10192.12271.76285.71333.75333.83353.89361.25654.65667.64668.601. (CC) gcc options: -lm -O3

GraphicsMagick

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.28Operation: ResizingCore i3 8100Celeron J3455Jetson TX2Jetson TX1ASUS TinkerBoardCeleron N2820Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianapu1d4Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbianOrange Pi PC v1.24080120160200SE +/- 0.33, N = 3SE +/- 0.67, N = 3SE +/- 0.33, N = 3187867262555233292720191815-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -ldl-lXext -lSM -lICE -lX11 -lgomp-ljpeg -lpng12 -lXext -lSM -lICE -lX11 -lxml2 -lgomp-ljpeg -lpng12 -lXext -lSM -lICE -lX11 -lxml2 -lgomp-lgomp-lXext -lSM -lICE -lX11 -lgomp-lgomp-lgomp-lgomp-lgomp-lgomp-lgomp1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lpthread

C-Ray

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeCore i3 8100Celeron J3455Jetson TX2Jetson TX1ASUS TinkerBoardODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model BCeleron N2820Pine A64apu1d4Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbianOrange Pi PC v1.230060090012001500SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 10.79, N = 6SE +/- 7.80, N = 6SE +/- 1.29, N = 3SE +/- 0.92, N = 3SE +/- 1.59, N = 3SE +/- 2.85, N = 3SE +/- 1.56, N = 3SE +/- 0.04, N = 3SE +/- 1.63, N = 3SE +/- 0.02, N = 3SE +/- 0.93, N = 3SE +/- 1.79, N = 3SE +/- 6.71, N = 321.6171.8388.38102.57155.40187.54222.75239.70239.99252.32277.19440.81490.45492.001421.611. (CC) gcc options: -lm -lpthread -O3

Netperf

Netperf is a network bandwidth testing software. This test profile is used for automated testing of a netperf client and requires you have access to a netperf server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Send File - Duration: 10 SecondsCore i3 8100Celeron N2820Celeron J3455ASUS TinkerBoardRaspberry Pi 3 Model B PlusOrange Pi PC v1.2Raspberry Pi 3 Model BRaspberry Pi 2 Model B2004006008001000SE +/- 0.04, N = 3SE +/- 0.30, N = 3SE +/- 0.12, N = 3SE +/- 0.93, N = 3SE +/- 0.09, N = 3SE +/- 0.01, N = 3SE +/- 0.08, N = 3SE +/- 0.05, N = 3941.39938.88938.86938.85321.6194.2093.8993.54-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Stream - Client To Server - Duration: 10 SecondsCore i3 8100Celeron N2820Celeron J3455ASUS TinkerBoardRaspberry Pi 3 Model B PlusOrange Pi PC v1.2Raspberry Pi 3 Model BRaspberry Pi 2 Model B2004006008001000SE +/- 0.13, N = 3SE +/- 0.60, N = 3SE +/- 0.99, N = 3SE +/- 0.80, N = 3SE +/- 0.25, N = 3SE +/- 0.00, N = 3SE +/- 0.04, N = 3SE +/- 0.05, N = 3787.50787.16786.12783.73226.5994.1494.0594.05-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: TCP Stream - Server To Client - Duration: 10 SecondsCore i3 8100ASUS TinkerBoardCeleron N2820Celeron J3455Raspberry Pi 3 Model B PlusOrange Pi PC v1.2Raspberry Pi 3 Model BRaspberry Pi 2 Model B2004006008001000SE +/- 0.02, N = 3SE +/- 0.89, N = 3SE +/- 0.03, N = 3SE +/- 0.09, N = 3SE +/- 0.14, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.22, N = 3941.30939.90938.88938.86322.3294.1994.0093.58-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenBenchmarking.orgMegabits/sec Throughput, More Is BetterNetperf 2.7.0Server: 192.168.1.55 - Test: UDP Stream - Server To Client - 10G - Duration: 10 SecondsCore i3 8100Celeron J3455Celeron N2820ASUS TinkerBoardRaspberry Pi 3 Model B PlusOrange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 3 Model B2004006008001000SE +/- 0.00, N = 3SE +/- 0.25, N = 3SE +/- 0.33, N = 3SE +/- 161.98, N = 6SE +/- 1.51, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.14, N = 3961.58959.56959.55634.19272.7896.1696.0296.00-march=native-march=native-march=native-march=native-march=native1. (CC) gcc options: -O3 -lm

OpenSSL

OpenSSL is an open-source toolkit that implements SSL (Secure Sockets Layer) and TLS (Transport Layer Security) protocols. This test measures the RSA 4096-bit performance of OpenSSL. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.1.0fRSA 4096-bit PerformanceCore i3 8100Celeron J3455Jetson TX1ASUS TinkerBoardODROID-C2Pine A64Raspberry Pi 3 Model B Plus latest raspbianCeleron N2820Raspberry Pi 3 Model Bapu1d4Raspberry Pi 3 Model B PlusRaspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbianOrange Pi PC v1.22004006008001000SE +/- 0.15, N = 3SE +/- 0.20, N = 3SE +/- 0.24, N = 3SE +/- 3.22, N = 6SE +/- 0.06, N = 3SE +/- 0.64, N = 3SE +/- 0.03, N = 3SE +/- 0.09, N = 3SE +/- 1.86, N = 6SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 31056.93215.57109.3385.4281.5060.4358.3356.5752.8739.2729.7725.7725.7316.87-m64-m641. (CC) gcc options: -O3 -pthread -lssl -lcrypto -ldl

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteCore i3 8100Celeron J3455Celeron N2820Jetson TX2Jetson TX1ASUS TinkerBoardapu1d4ODROID-C2Raspberry Pi 3 Model B PlusPine A64Raspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model BRaspberry Pi 2 Model B latest raspbianRaspberry Pi 2 Model BOrange Pi PC v1.2120K240K360K480K600KSE +/- 365.01, N = 3SE +/- 342.93, N = 3SE +/- 71.72, N = 3SE +/- 256.97, N = 3SE +/- 682.38, N = 3SE +/- 49.03, N = 3SE +/- 36.93, N = 3SE +/- 625.53, N = 3SE +/- 55.25, N = 3SE +/- 7.80, N = 3SE +/- 13.54, N = 3SE +/- 39.18, N = 3SE +/- 105.21, N = 3SE +/- 114.02, N = 3SE +/- 11.79, N = 353707820837514119212046911074565900594884742340392369863477934682210522095213383

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETCore i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardPine A64ODROID-C2Raspberry Pi 3 Model B Plusapu1d4Raspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model BRaspberry Pi 2 Model BOrange Pi PC v1.2Raspberry Pi 2 Model B latest raspbian700K1400K2100K2800K3500KSE +/- 3548.42, N = 3SE +/- 997.32, N = 3SE +/- 2098.75, N = 3SE +/- 4628.81, N = 3SE +/- 4492.02, N = 3SE +/- 2325.31, N = 3SE +/- 2618.64, N = 3SE +/- 857.57, N = 3SE +/- 940.39, N = 3SE +/- 2020.56, N = 3SE +/- 170.90, N = 3SE +/- 2202.38, N = 3SE +/- 560.95, N = 3SE +/- 1373.57, N = 3SE +/- 662.41, N = 332644267334996447595115064268383153262581852563062457072345932107631786691125591078751073391. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETCore i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardODROID-C2Pine A64Raspberry Pi 3 Model B Plusapu1d4Raspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbianOrange Pi PC v1.2500K1000K1500K2000K2500KSE +/- 6761.21, N = 3SE +/- 6734.69, N = 3SE +/- 636.08, N = 3SE +/- 2230.70, N = 3SE +/- 2444.94, N = 3SE +/- 2568.46, N = 3SE +/- 2790.78, N = 3SE +/- 2887.44, N = 3SE +/- 972.61, N = 3SE +/- 648.08, N = 3SE +/- 1414.83, N = 3SE +/- 1308.07, N = 3SE +/- 495.26, N = 3SE +/- 571.58, N = 3SE +/- 1036.24, N = 321583166015934136813428863351192160131720121614721545081469061310981290986614965597642421. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

ebizzy

This is a test of ebizzy, a program to generate workloads resembling web server workloads. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRecords/s, More Is Betterebizzy 0.3Core i3 8100Jetson TX2Jetson TX1ASUS TinkerBoardCeleron J3455Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianCeleron N2820ODROID-C2Pine A64Raspberry Pi 2 Model Bapu1d4Orange Pi PC v1.2Raspberry Pi 2 Model B latest raspbian50K100K150K200K250KSE +/- 296.45, N = 3SE +/- 896.20, N = 6SE +/- 1266.17, N = 6SE +/- 220.50, N = 3SE +/- 25.58, N = 3SE +/- 47.17, N = 3SE +/- 49.17, N = 3SE +/- 22.55, N = 3SE +/- 12.12, N = 3SE +/- 4.73, N = 3SE +/- 194.60, N = 6SE +/- 8.89, N = 3SE +/- 73.23, N = 3SE +/- 112.53, N = 6SE +/- 0.88, N = 321141731865229771920091978102762267385127491445564500437239183793-march=native1. (CC) gcc options: -pthread -lpthread -O3

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlCore i3 8100Celeron J3455Jetson TX2Jetson TX1Celeron N2820ASUS TinkerBoardODROID-C2Raspberry Pi 3 Model B Plusapu1d4Raspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianPine A64Orange Pi PC v1.2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian0.5631.1261.6892.2522.815SE +/- 0.00061183, N = 3SE +/- 0.00054440, N = 3SE +/- 0.00279271, N = 3SE +/- 0.00299646, N = 3SE +/- 0.00045652, N = 3SE +/- 0.01896498, N = 6SE +/- 0.02597362, N = 6SE +/- 0.00441133, N = 3SE +/- 0.00757445, N = 3SE +/- 0.00197500, N = 3SE +/- 0.00406165, N = 3SE +/- 0.00367742, N = 3SE +/- 0.03956969, N = 6SE +/- 0.00655717, N = 3SE +/- 0.01895136, N = 30.132023310.452045290.539501710.593429060.670225590.713104431.130250501.164408761.260910881.340277811.376565251.420368212.139849662.457806462.50217523

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterCore i3 8100Celeron N2820Celeron J3455ASUS TinkerBoardODROID-C2Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model Bapu1d4Jetson TX2Orange Pi PC v1.2Pine A64Raspberry Pi 3 Model B Plus latest raspbianJetson TX1Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbian0.00330.00660.00990.01320.0165SE +/- 0.00005500, N = 6SE +/- 0.00004880, N = 3SE +/- 0.00001924, N = 3SE +/- 0.00009055, N = 6SE +/- 0.00000285, N = 3SE +/- 0.00010890, N = 3SE +/- 0.00008168, N = 3SE +/- 0.00000114, N = 3SE +/- 0.00001889, N = 3SE +/- 0.00007243, N = 3SE +/- 0.00000996, N = 3SE +/- 0.00046710, N = 12SE +/- 0.00013674, N = 3SE +/- 0.00001921, N = 3SE +/- 0.00013360, N = 30.000951080.003328110.004023430.004105940.005335600.006193010.007015930.007665630.008246710.009415630.010630920.011509090.011810830.012656260.01478614

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsCore i3 8100Celeron J3455Jetson TX2Celeron N2820Jetson TX1ASUS TinkerBoardapu1d4Raspberry Pi 3 Model B Plus latest raspbianRaspberry Pi 3 Model B PlusRaspberry Pi 3 Model BOrange Pi PC v1.2ODROID-C2Raspberry Pi 2 Model BRaspberry Pi 2 Model B latest raspbianPine A644080120160200SE +/- 0.02, N = 3SE +/- 0.22, N = 6SE +/- 0.69, N = 6SE +/- 0.36, N = 6SE +/- 0.88, N = 6SE +/- 3.14, N = 6SE +/- 0.54, N = 12SE +/- 0.92, N = 5SE +/- 4.17, N = 6SE +/- 2.24, N = 6SE +/- 2.09, N = 6SE +/- 8.61, N = 6SE +/- 5.53, N = 6SE +/- 9.90, N = 9SE +/- 2.46, N = 55.7315.8719.3621.5224.8929.5747.3062.7965.7869.8575.0580.45106.88162.11162.151. Core i3 8100: git version 2.14.12. Celeron J3455: git version 2.15.13. Jetson TX2: git version 2.7.44. Celeron N2820: git version 2.15.15. Jetson TX1: git version 2.7.46. ASUS TinkerBoard: git version 2.11.07. apu1d4: git version 2.11.08. Raspberry Pi 3 Model B Plus latest raspbian: git version 2.11.09. Raspberry Pi 3 Model B Plus: git version 2.11.010. Raspberry Pi 3 Model B: git version 2.11.011. Orange Pi PC v1.2: git version 1.7.10.412. ODROID-C2: git version 2.7.413. Raspberry Pi 2 Model B: git version 2.11.014. Raspberry Pi 2 Model B latest raspbian: git version 2.11.015. Pine A64: git version 2.7.4

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesCore i3 8100Celeron J3455Jetson TX2Celeron N2820Jetson TX1ASUS TinkerBoardapu1d4ODROID-C2Pine A64Raspberry Pi 3 Model B PlusRaspberry Pi 3 Model BRaspberry Pi 3 Model B Plus latest raspbianOrange Pi PC v1.2Raspberry Pi 2 Model B latest raspbianRaspberry Pi 2 Model B8K16K24K32K40KSE +/- 6.23, N = 3SE +/- 13.91, N = 3SE +/- 7.22, N = 3SE +/- 4.33, N = 3SE +/- 4.81, N = 3SE +/- 17.24, N = 3SE +/- 55.67, N = 3SE +/- 22.24, N = 3SE +/- 25.48, N = 3SE +/- 11.46, N = 3SE +/- 52.45, N = 3SE +/- 46.28, N = 3SE +/- 51.60, N = 3SE +/- 89.36, N = 3SE +/- 113.95, N = 3144542155808591263759273127441512420338208412438024380245553812238200

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 19 March 2018 20:08 by user pi.

Raspberry Pi 3 Model B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 21 March 2018 22:59 by user pi.

Raspberry Pi 3 Model B Plus

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 926MB, Disk: 32GB GB2MW, Graphics: VC4 V3D 2.1 1024MB, Monitor: VE228

OS: Raspbian 9.4, Kernel: 4.9.80-v7+ (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 2.1 Mesa 13.0.6 Gallium 0.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 21 March 2018 17:55 by user pi.

ASUS TinkerBoard

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 8GB SD, Graphics: LLVMpipe, Monitor: VE228

OS: Debian 9.4, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE 0.9.3, Display Server: X Server 1.19.2, Display Driver: modesetting 1.19.2, OpenGL: 3.3 Mesa 13.0.6 Gallium 0.4 (LLVM 3.9 128 bits), Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 20 March 2018 12:31 by user linaro.

ODROID-C2

Processor: Unknown @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.14.79-108 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 12.0.6 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: meson_cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 09:06 by user odroid.

Pine A64

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 8GB SL08G, Graphics: LLVMpipe

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 11.2.0 Gallium 0.4 (LLVM 3.8 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 20 March 2018 23:03 by user ubuntu.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 3.10.96-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 24.2.1, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: __GL_PERFMON_MODE=1
Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 13:53 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.00GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: GP10B, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.15-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 27.1.0, OpenGL: 4.5.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609 + CUDA 8.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 21 March 2018 12:17 by user NVIDIA.

Orange Pi PC v1.2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB GB2MW

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand
Python Notes: Python 2.7.3 + Python 3.2.3

Testing initiated at 20 March 2018 17:14 by user root.

Celeron N2820

Processor: Intel Celeron N2820 @ 2.40GHz (2 Cores), Motherboard: Intel DN2820FYK (FYBYT10H.86A.0050.2015.0326.1731 BIOS), Chipset: Intel Atom Z36xxx/Z37xxx, Memory: 8192MB, Disk: 60GB OCZ VERTEX2, Graphics: Intel Bay Trail 1536MB (756MHz), Audio: Realtek ALC283, Monitor: DELL P2415Q, Network: Realtek RTL8111/8168/8411 + Intel Wireless 7260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.2 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 2048x1280

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Testing initiated at 20 March 2018 19:13 by user phoronix.

Celeron J3455

Processor: Intel Celeron J3455 @ 2.30GHz (4 Cores), Motherboard: Compulab fitlet2 v1.1 (FLT2.0.38.01.00 BIOS), Chipset: Intel Celeron N3350/Pentium, Memory: 8192MB, Disk: 127GB NT-128, Graphics: Intel HD 500 3072MB (750MHz), Audio: Realtek ALC1150, Monitor: DELL P2415Q, Network: Intel I211 Gigabit Connection + Intel Wireless 8260

OS: Ubuntu 18.04, Kernel: 4.15.0-10-generic (x86_64), Desktop: GNOME Shell 3.27.91, Display Driver: modesetting 1.19.6, OpenGL: 4.5 Mesa 18.0.0-rc4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14+ + Python 3.6.4+
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline Protection

Testing initiated at 20 March 2018 17:35 by user phoronix.

Core i3 8100

Processor: Intel Core i3-8100 @ 3.60GHz (4 Cores), Motherboard: ASRock Z370M-ITX/ac (P1.20 BIOS), Chipset: Intel Device 3e1f, Memory: 8192MB, Disk: 60GB DREVO X1 SSD, Graphics: (1100MHz), Audio: Realtek ALC892, Network: Intel Connection + Intel Device 24fb

OS: Ubuntu 17.10, Kernel: 4.15.0-999-generic (x86_64) 20171231, Desktop: GNOME Shell 3.26.1, Compiler: GCC 8.0.1 20180319, File-System: ext4

Compiler Notes: --disable-multilib --enable-checking=release --enable-languages=c,c++,fortran
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.14 + Python 3.6.3

Testing initiated at 20 March 2018 16:12 by user phoronix.

apu1d4

Processor: AMD G-T40E @ 1.00GHz (2 Cores), Motherboard: PC Engines apu1 v1.0 (v4.9.0.3 BIOS), Chipset: AMD Family 14h Root Complex, Memory: 4096MB, Disk: 16GB SATA SSD, Network: 3 x Realtek RTL8111/8168/8411

OS: Debian GNU/Linux 9, Kernel: 4.9.0-3-amd64 (x86_64), Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-vtable-verify --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-default-libstdcxx-abi=new --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic -v
Processor Notes: Scaling Governor: acpi-cpufreq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 April 2019 16:42 by user root.

Raspberry Pi 2 Model B latest raspbian

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 923MB, Disk: 32GB SL32G, Graphics: BCM2708

OS: Raspbian 9.8, Kernel: 4.14.79-v7+ (armv7l), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 9 April 2019 11:37 by user obiyo.

Raspberry Pi 3 Model B Plus latest raspbian

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB SL32G, Graphics: BCM2708

OS: Raspbian 9.8, Kernel: 4.14.98-v7+ (armv7l), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 9 April 2019 16:31 by user obiyo.