Raspberry Pi 3 Model A+ Benchmarks

Raspberry Pi 3 Model A Plus Benchmarks by Michael Larabel for a future article.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1812090-SK-1811243RA11
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

C/C++ Compiler Tests 5 Tests
CPU Massive 7 Tests
Creator Workloads 6 Tests
Encoding 2 Tests
Multi-Core 5 Tests
Programmer / Developer System Benchmarks 2 Tests
Renderers 3 Tests
Server 2 Tests
Server CPU Tests 6 Tests
Single-Threaded 5 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Disable Color Branding
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 2 Model B
November 20 2018
  9 Hours, 56 Minutes
Raspberry Pi 3 Model B
November 20 2018
  5 Hours, 44 Minutes
Raspberry Pi 3 Model B+
November 19 2018
  6 Hours, 17 Minutes
Raspberry Pi 3 Model A+
November 22 2018
  5 Hours, 2 Minutes
ASUS Tinker Board
November 20 2018
  3 Hours, 59 Minutes
Firefly ROC-RK3328-CC
November 21 2018
  5 Hours, 38 Minutes
ODROID-C2
November 21 2018
  3 Hours, 57 Minutes
Odroid XU4
November 24 2018
  3 Hours
Asrock J5005
November 24 2018
 
Pentium J5005
November 24 2018
  1 Hour, 23 Minutes
Pentium J5005 Clear Linux
December 09 2018
  1 Hour, 19 Minutes
Invert Hiding All Results Option
  4 Hours, 12 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model B

Changed Processor to ARMv7 rev 4 @ 1.20GHz (4 Cores).

Changed Motherboard to BCM2835 Raspberry Pi 3 Model B Rev 1.2.

Changed Disk to 32GB GB1QT.

Raspberry Pi 3 Model B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1824x984

Raspberry Pi 3 Model A+

Changed Motherboard to BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0.

Changed Memory to 431MB.

Changed Disk to 32GB SC32G.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ODROID-C2

Processor: Amlogic ARMv8 Cortex-A53 @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Odroid XU4

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4 Hardkernel Odroid XU4, Memory: 2048MB, Disk: 32GB Wireless Stick + 64GB SR64G, Graphics: llvmpipe 2048MB, Monitor: IPS224

OS: Ubuntu 16.04, Kernel: 4.14.73-136 (armv7l), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: usbhid.quirks=0x0eef:0x0005:0x0004
Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.12 + Python 3.5.2

Asrock J5005

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15+ + Python 3.6.7
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp

Pentium J5005

Processor: Intel Pentium Silver J5005 @ 2.80GHz (4 Cores), Motherboard: ASRock J5005-ITX (P1.00 BIOS), Chipset: Intel Device 31f0, Memory: 16384MB, Disk: 32GB ADATA SP800 + 32GB Wireless Stick, Graphics: Intel UHD 605 3072MB (800MHz), Audio: Realtek ALC892, Monitor: IPS224, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.10, Kernel: 4.18.0-11-generic (x86_64), Desktop: Xfce 4.12, Display Server: X Server 1.20.1, Display Driver: modesetting 1.20.1, OpenGL: 4.5 Mesa 18.2.2, Compiler: GCC 8.2.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15+ + Python 3.6.7
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp

Pentium J5005 Clear Linux

Processor: Intel Pentium Silver J5005 @ 2.80GHz (4 Cores), Motherboard: ASRock J5005-ITX (P1.00 BIOS), Chipset: Intel Device 31f0, Memory: 8192MB, Disk: 250GB Crucial_CT250MX2 + 32GB Wireless Stick, Graphics: Intel UHD 605 3GB (800MHz), Audio: Realtek ALC892, Monitor: IPS224, Network: Realtek RTL8111/8168/8411

OS: Clear Linux OS 26730, Kernel: 4.19.6-669.native (x86_64), Desktop: GNOME Shell 3.30.2, Display Server: X Server 1.20.3, Display Driver: modesetting 1.20.3, OpenGL: 4.5 Mesa 19.0.0-devel, Vulkan: 1.1.90, Compiler: GCC 8.2.1 20180502 + Clang 7.0.0 + LLVM 7.0.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: CFFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl now-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl-sort-common-Wl--enable-new-dtags MESA_GLSL_CACHE_DISABLE=0 CFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags CXXFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags-fvisibility-inlines-hidden-Wl--enable-new-dtags FFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl--enable-new-dtags THEANO_FLAGS=floatX=float32 openmp=true gcc.cxxflags="-ftree-vectorize-mavx"
Compiler Notes: --build=x86_64-generic-linux --disable-libmpx --disable-libunwind-exceptions --disable-multiarch --disable-vtable-verify --enable-__cxa_atexit --enable-bootstrap --enable-clocale=gnu --enable-gnu-indirect-function --enable-languages=c,c++,fortran,go --enable-ld=default --enable-libstdcxx-pch --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --exec-prefix=/usr --includedir=/usr/include --target=x86_64-generic-linux --with-arch=westmere --with-glibc-version=2.19 --with-gnu-ld --with-isl --with-ppl=yes --with-tune=haswell
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 3.7.1
Security Notes: KPTI + __user pointer sanitization + Enhanced IBRS IBPB

Raspberry Pi 3 Model A+ BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorChipsetAudioNetworkOSKernelDesktopDisplay ServerCompilerFile-SystemScreen ResolutionOpenGLDisplay DriverVulkanRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+Raspberry Pi 3 Model A+ASUS Tinker BoardFirefly ROC-RK3328-CCODROID-C2Odroid XU4Asrock J5005Pentium J5005Pentium J5005 Clear LinuxARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.64.14.79-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 20170516ext4656x416ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QTARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1824x984BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0431MB32GB SC32GARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)X Server 1.18.41024x768Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CCUbuntu 18.044.4.114 (aarch64)GCC 7.3.0Amlogic ARMv8 Cortex-A53 @ 1.54GHz (4 Cores)ODROID-C2OSD3.16.57-20 (aarch64)X Server 1.19.61920x1080ARMv7 rev 3 @ 1.50GHz (8 Cores)ODROID-XU4 Hardkernel Odroid XU432GB Wireless Stick + 64GB SR64Gllvmpipe 2048MBIPS224Ubuntu 16.044.14.73-136 (armv7l)MATE 1.12.1X Server 1.18.43.3 Mesa 18.0.5 (LLVM 6.0 128 bits)GCC 5.4.0 20160609Intel Pentium Silver J5005 @ 2.80GHz (4 Cores)ASRock J5005-ITX (P1.00 BIOS)Intel Device 31f016384MB32GB ADATA SP800 + 32GB Wireless StickIntel UHD 605 3072MB (800MHz)Realtek ALC892Realtek RTL8111/8168/8411Ubuntu 18.104.18.0-11-generic (x86_64)Xfce 4.12X Server 1.20.1modesetting 1.20.14.5 Mesa 18.2.2GCC 8.2.08192MB250GB Crucial_CT250MX2 + 32GB Wireless StickIntel UHD 605 3GB (800MHz)Clear Linux OS 267304.19.6-669.native (x86_64)GNOME Shell 3.30.2X Server 1.20.3modesetting 1.20.34.5 Mesa 19.0.0-devel1.1.90GCC 8.2.1 20180502 + Clang 7.0.0 + LLVM 7.0.0OpenBenchmarking.orgCompiler Details- Raspberry Pi 2 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model A+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v - ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v - Odroid XU4: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - Asrock J5005: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Pentium J5005: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v - Pentium J5005 Clear Linux: --build=x86_64-generic-linux --disable-libmpx --disable-libunwind-exceptions --disable-multiarch --disable-vtable-verify --enable-__cxa_atexit --enable-bootstrap --enable-clocale=gnu --enable-gnu-indirect-function --enable-languages=c,c++,fortran,go --enable-ld=default --enable-libstdcxx-pch --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --exec-prefix=/usr --includedir=/usr/include --target=x86_64-generic-linux --with-arch=westmere --with-glibc-version=2.19 --with-gnu-ld --with-isl --with-ppl=yes --with-tune=haswell Processor Details- Raspberry Pi 2 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B+: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model A+: Scaling Governor: BCM2835 Freq ondemand- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Odroid XU4: Scaling Governor: cpufreq-dt performance- Asrock J5005: Scaling Governor: intel_pstate powersave- Pentium J5005: Scaling Governor: intel_pstate performance- Pentium J5005 Clear Linux: Scaling Governor: intel_pstate performancePython Details- Raspberry Pi 2 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B+: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model A+: Python 2.7.13 + Python 3.5.3- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Odroid XU4: Python 2.7.12 + Python 3.5.2- Asrock J5005: Python 2.7.15+ + Python 3.6.7- Pentium J5005: Python 2.7.15+ + Python 3.6.7- Pentium J5005 Clear Linux: Python 3.7.1Kernel Details- Odroid XU4: usbhid.quirks=0x0eef:0x0005:0x0004Security Details- Asrock J5005: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp- Pentium J5005: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp- Pentium J5005 Clear Linux: KPTI + __user pointer sanitization + Enhanced IBRS IBPBEnvironment Details- Pentium J5005 Clear Linux: CFFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl now-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl-sort-common-Wl--enable-new-dtags MESA_GLSL_CACHE_DISABLE=0 CFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags CXXFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags-fvisibility-inlines-hidden-Wl--enable-new-dtags FFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl--enable-new-dtags THEANO_FLAGS=floatX=float32 openmp=true gcc.cxxflags="-ftree-vectorize-mavx"

Raspberry Pi 3 Model A+ Benchmarkstinymembench: Standard Memcpyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingcompress-7zip: Compress Speed Testc-ray: Total Time - 4K, 16 Rays Per Pixelaobench: 2048 x 2048 - Total Timeencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpretergimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskpybench: Total For Average Test Timesphpbench: PHP Benchmark Suitegit: Time To Complete Common Git Commandsgimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskgimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskgimp: resizegimp: rotategimp: auto-levelsgimp: unsharp-maskRaspberry Pi 2 Model BRaspberry Pi 3 Model BRaspberry Pi 3 Model B+Raspberry Pi 3 Model A+ASUS Tinker BoardFirefly ROC-RK3328-CCODROID-C2Odroid XU4Asrock J5005Pentium J5005Pentium J5005 Clear Linux100011.201.13116843646685152.391983710.01409889103.09231209549380872092096.99130215.992.03185823173343521.299323920.0084304160.14134126328243283442659.52128516.512.08180321112983021.210610750.0080797455.28128116311212063808749.17130017.25199320682863041.159524010.0097168750.82118104286208744033858.67153222.383.36294615792141580.743728820.0042746693186141525.7212401.65153626042983151.703258770.00598828142425285241.47171822.512.88216515592622651.088939650.00548034126195966442.08221449.725.0741877861571230.678310000.0059529389298033231.4148.5983.1975.64212.16562691.15799439577.6557.190.264379740.00161768218532244410.9420.4430.3237.2143.06556813.46861441576.6916.520.278294040.00260848204337435511.7417.6031.5738.6845.38OpenBenchmarking.org

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyPentium J5005Pentium J5005 Clear LinuxOdroid XU4ODROID-C2ASUS Tinker BoardRaspberry Pi 3 Model BRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Firefly ROC-RK3328-CCRaspberry Pi 2 Model B12002400360048006000SE +/- 12.27, N = 3SE +/- 63.17, N = 3SE +/- 41.43, N = 3SE +/- 3.71, N = 3SE +/- 2.90, N = 3SE +/- 2.30, N = 3SE +/- 9.55, N = 3SE +/- 8.69, N = 3SE +/- 17.20, N = 6SE +/- 14.55, N = 35626556822141718153213021300128512401000-O3 -pipe -fexceptions -fstack-protector -m64 -ffat-lto-objects -fno-signed-zeros -fno-trapping-math -fassociative-math1. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetPentium J5005 Clear LinuxPentium J5005Firefly ROC-RK3328-CCOdroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B16003200480064008000SE +/- 77.73, N = 3SE +/- 6.72, N = 3SE +/- 121.56, N = 6SE +/- 3.70, N = 3SE +/- 0.69, N = 3SE +/- 2.73, N = 3SE +/- 35.55, N = 3SE +/- 24.88, N = 3SE +/- 16.88, N = 3SE +/- 3.17, N = 37453647956284832419937371833182617731188-O3 -pipe -fexceptions -fstack-protector -m64 -ffat-lto-objects -fno-signed-zeros -fno-trapping-math -fassociative-math1. (CC) gcc options: -O2 -lm

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingPentium J5005Odroid XU4ODROID-C2ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B20406080100SE +/- 0.04, N = 3SE +/- 0.04, N = 3SE +/- 0.29, N = 3SE +/- 0.34, N = 3SE +/- 0.16, N = 3SE +/- 0.03, N = 3SE +/- 0.31, N = 3SE +/- 0.03, N = 391.1549.7222.5122.3817.2516.5115.9911.20-msse -mrecip -mfpmath=sse -msse2 -mssse31. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-09-25H.264 Video EncodingPentium J5005 Clear LinuxOdroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model B+Raspberry Pi 3 Model BFirefly ROC-RK3328-CCRaspberry Pi 2 Model B3691215SE +/- 0.19, N = 3SE +/- 0.08, N = 4SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 313.465.073.362.882.082.031.651.13-m64 -O3 -ffast-math -pipe -fexceptions -fstack-protector -ffat-lto-objects -fno-signed-zeros -fno-trapping-math -fassociative-math -std=gnu99 -fPIC -fomit-frame-pointer -fno-tree-vectorize-lavformat -lavcodec -lavutil -lswscale1. (CC) gcc options: -ldl -lm -lpthread

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestPentium J5005 Clear LinuxPentium J5005Odroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model A+Raspberry Pi 3 Model BRaspberry Pi 3 Model B+Firefly ROC-RK3328-CCRaspberry Pi 2 Model B2K4K6K8K10KSE +/- 29.14, N = 3SE +/- 27.97, N = 3SE +/- 77.30, N = 12SE +/- 33.93, N = 12SE +/- 5.03, N = 3SE +/- 7.97, N = 3SE +/- 3.18, N = 3SE +/- 31.01, N = 3SE +/- 4.51, N = 3SE +/- 2.91, N = 386147994418729462165199318581803153611681. (CXX) g++ options: -pipe -lpthread

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelPentium J5005Pentium J5005 Clear LinuxOdroid XU4ODROID-C2ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BFirefly ROC-RK3328-CCRaspberry Pi 2 Model B9001800270036004500SE +/- 0.15, N = 3SE +/- 0.06, N = 3SE +/- 15.80, N = 3SE +/- 17.47, N = 3SE +/- 2.53, N = 3SE +/- 4.77, N = 3SE +/- 2.21, N = 3SE +/- 11.39, N = 3SE +/- 12.43, N = 3SE +/- 39.73, N = 33954157861559157920682111231726044364-pipe -fexceptions -fstack-protector -m64 -ffat-lto-objects -fno-signed-zeros -fno-trapping-math -fassociative-math1. (CC) gcc options: -lm -lpthread -O3

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimePentium J5005 Clear LinuxPentium J5005Odroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model A+Raspberry Pi 3 Model B+Firefly ROC-RK3328-CCRaspberry Pi 3 Model BRaspberry Pi 2 Model B140280420560700SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.17, N = 3SE +/- 3.61, N = 4SE +/- 1.31, N = 3SE +/- 0.69, N = 3SE +/- 4.72, N = 9SE +/- 0.61, N = 3SE +/- 0.11, N = 3SE +/- 1.37, N = 376.6977.65157.00214.00262.00286.00298.00298.00334.00668.001. (CC) gcc options: -lm -O3

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Pentium J5005 Clear LinuxPentium J5005Odroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model B+Raspberry Pi 3 Model A+Firefly ROC-RK3328-CCRaspberry Pi 3 Model BRaspberry Pi 2 Model B110220330440550SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.15, N = 3SE +/- 0.54, N = 3SE +/- 0.21, N = 3SE +/- 0.45, N = 3SE +/- 1.06, N = 3SE +/- 0.28, N = 3SE +/- 0.32, N = 3SE +/- 0.82, N = 316.5257.19123.00158.00265.00302.00304.00315.00352.00515.001. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlPentium J5005Pentium J5005 Clear LinuxOdroid XU4ASUS Tinker BoardODROID-C2Raspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BFirefly ROC-RK3328-CCRaspberry Pi 2 Model B0.53821.07641.61462.15282.691SE +/- 0.00042909, N = 3SE +/- 0.00027146, N = 3SE +/- 0.00184379, N = 3SE +/- 0.00463075, N = 3SE +/- 0.01698561, N = 9SE +/- 0.00092390, N = 3SE +/- 0.00526666, N = 3SE +/- 0.01280566, N = 3SE +/- 0.02244345, N = 3SE +/- 0.02647362, N = 30.264379740.278294040.678310000.743728821.088939651.159524011.210610751.299323921.703258772.39198371

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterPentium J5005Pentium J5005 Clear LinuxASUS Tinker BoardODROID-C2Odroid XU4Firefly ROC-RK3328-CCRaspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 3 Model A+Raspberry Pi 2 Model B0.00320.00640.00960.01280.016SE +/- 0.00000204, N = 3SE +/- 0.00000433, N = 3SE +/- 0.00008878, N = 12SE +/- 0.00002918, N = 3SE +/- 0.00006134, N = 3SE +/- 0.00000741, N = 3SE +/- 0.00016248, N = 12SE +/- 0.00015906, N = 3SE +/- 0.00040707, N = 12SE +/- 0.00023188, N = 120.001617680.002608480.004274660.005480340.005952930.005988280.008079740.008430410.009716870.01409889

GIMP

GIMP is an open-source image manipulaton program. This test profile will use the system-provided GIMP program otherwise on Windows relys upon a pre-packaged Windows binary from upstream GIMP.org. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.18Test: resizeRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B20406080100SE +/- 0.68, N = 6SE +/- 0.91, N = 12SE +/- 0.94, N = 3SE +/- 1.78, N = 1250.8255.2860.14103.09

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.18Test: rotateRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B50100150200250SE +/- 0.27, N = 3SE +/- 1.79, N = 3SE +/- 1.04, N = 3SE +/- 0.92, N = 3118128134231

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.18Test: auto-levelsRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B50100150200250SE +/- 0.10, N = 3SE +/- 0.66, N = 3SE +/- 1.98, N = 3SE +/- 0.53, N = 3104116126209

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.18Test: unsharp-maskRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B120240360480600SE +/- 0.38, N = 3SE +/- 0.31, N = 3SE +/- 0.37, N = 3SE +/- 0.59, N = 3286311328549

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesPentium J5005 Clear LinuxPentium J5005Odroid XU4ASUS Tinker BoardODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B8K16K24K32K40KSE +/- 4.04, N = 3SE +/- 28.10, N = 3SE +/- 42.81, N = 3SE +/- 10.12, N = 3SE +/- 29.79, N = 3SE +/- 26.74, N = 3SE +/- 49.32, N = 3SE +/- 54.84, N = 3SE +/- 82.23, N = 32043218589299318126191424220874212062432838087

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuitePentium J5005 Clear LinuxPentium J5005Odroid XU4ASUS Tinker BoardODROID-C2Firefly ROC-RK3328-CCRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Raspberry Pi 3 Model BRaspberry Pi 2 Model B80K160K240K320K400KSE +/- 457.27, N = 3SE +/- 849.56, N = 3SE +/- 580.58, N = 3SE +/- 241.65, N = 3SE +/- 81.27, N = 3SE +/- 154.37, N = 3SE +/- 38.37, N = 3SE +/- 154.15, N = 3SE +/- 37.95, N = 3SE +/- 55.17, N = 33743553224448033261415596645285240338380873442620920

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsPentium J5005Pentium J5005 Clear LinuxASUS Tinker BoardOdroid XU4Firefly ROC-RK3328-CCODROID-C2Raspberry Pi 3 Model B+Raspberry Pi 3 Model A+Raspberry Pi 3 Model BRaspberry Pi 2 Model B20406080100SE +/- 0.20, N = 3SE +/- 0.08, N = 3SE +/- 0.36, N = 6SE +/- 1.52, N = 12SE +/- 0.59, N = 3SE +/- 1.69, N = 12SE +/- 1.71, N = 9SE +/- 0.59, N = 3SE +/- 1.75, N = 12SE +/- 1.54, N = 1210.9411.7425.7231.4141.4742.0849.1758.6759.5296.991. Pentium J5005: git version 2.19.12. Pentium J5005 Clear Linux: git version 2.19.23. ASUS Tinker Board: git version 2.11.04. Odroid XU4: git version 2.7.45. Firefly ROC-RK3328-CC: git version 2.17.16. ODROID-C2: git version 2.17.17. Raspberry Pi 3 Model B+: git version 2.11.08. Raspberry Pi 3 Model A+: git version 2.11.09. Raspberry Pi 3 Model B: git version 2.11.010. Raspberry Pi 2 Model B: git version 2.11.0

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Firefly ROC-RK3328-CCODROID-C2ASUS Tinker Board122436486052.0036.7135.4328.6323.571. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ODROID-C2: $60 reported cost.5. ASUS Tinker Board: $65 reported cost.

TTSIOD 3D Renderer

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+ODROID-C2ASUS Tinker Board0.15530.31060.46590.62120.77650.690.470.380.341. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. ODROID-C2: $60 reported cost.4. ASUS Tinker Board: $65 reported cost.

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-09-25Performance / Cost - H.264 Video EncodingRaspberry Pi 3 Model B+ODROID-C2Firefly ROC-RK3328-CCASUS Tinker Board0.01350.0270.04050.0540.06750.060.050.050.051. Raspberry Pi 3 Model B+: $35 reported cost.2. ODROID-C2: $60 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $65 reported cost.

7-Zip Compression

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+ASUS Tinker BoardFirefly ROC-RK3328-CCODROID-C22040608010079.7251.5145.3243.8936.081. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. ASUS Tinker Board: $65 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. ODROID-C2: $60 reported cost.

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Firefly ROC-RK3328-CCODROID-C2ASUS Tinker Board20K40K60K80K100K51700.0073885.0091140.0093540.00102635.001. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ODROID-C2: $60 reported cost.5. ASUS Tinker Board: $65 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Firefly ROC-RK3328-CCASUS Tinker BoardODROID-C23K6K9K12K15K7150.0010430.0010430.0013910.0015720.001. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. Firefly ROC-RK3328-CC: $35 reported cost.4. ASUS Tinker Board: $65 reported cost.5. ODROID-C2: $60 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Raspberry Pi 3 Model A+ASUS Tinker BoardRaspberry Pi 3 Model B+Firefly ROC-RK3328-CCODROID-C23K6K9K12K15K7600.0010270.0010570.0011025.0015900.001. Raspberry Pi 3 Model A+: $25 reported cost.2. ASUS Tinker Board: $65 reported cost.3. Raspberry Pi 3 Model B+: $35 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. ODROID-C2: $60 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+ASUS Tinker BoardFirefly ROC-RK3328-CCODROID-C2153045607528.9942.3748.3459.6165.341. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.3. ASUS Tinker Board: $65 reported cost.4. Firefly ROC-RK3328-CC: $35 reported cost.5. ODROID-C2: $60 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterFirefly ROC-RK3328-CCRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+ASUS Tinker BoardODROID-C20.07430.14860.22290.29720.37150.210.240.280.280.331. Firefly ROC-RK3328-CC: $35 reported cost.2. Raspberry Pi 3 Model A+: $25 reported cost.3. Raspberry Pi 3 Model B+: $35 reported cost.4. ASUS Tinker Board: $65 reported cost.5. ODROID-C2: $60 reported cost.

GIMP

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGIMP 2.8.18Performance / Cost - Test: resizeRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+4008001200160020001270.501934.801. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGIMP 2.8.18Performance / Cost - Test: rotateRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+100020003000400050002950.004480.001. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGIMP 2.8.18Performance / Cost - Test: auto-levelsRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+90018002700360045002600.004060.001. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGIMP 2.8.18Performance / Cost - Test: unsharp-maskRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+2K4K6K8K10K7150.0010885.001. Raspberry Pi 3 Model A+: $25 reported cost.2. Raspberry Pi 3 Model B+: $35 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesFirefly ROC-RK3328-CCRaspberry Pi 3 Model A+ASUS Tinker BoardRaspberry Pi 3 Model B+ODROID-C2160K320K480K640K800K498470.00521850.00605670.00742210.00757140.001. Firefly ROC-RK3328-CC: $35 reported cost.2. Raspberry Pi 3 Model A+: $25 reported cost.3. ASUS Tinker Board: $65 reported cost.4. Raspberry Pi 3 Model B+: $35 reported cost.5. ODROID-C2: $60 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteRaspberry Pi 3 Model A+Firefly ROC-RK3328-CCRaspberry Pi 3 Model B+ODROID-C2ASUS Tinker Board300600900120015001613.521510.061088.20994.40944.851. Raspberry Pi 3 Model A+: $25 reported cost.2. Firefly ROC-RK3328-CC: $35 reported cost.3. Raspberry Pi 3 Model B+: $35 reported cost.4. ODROID-C2: $60 reported cost.5. ASUS Tinker Board: $65 reported cost.

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsFirefly ROC-RK3328-CCRaspberry Pi 3 Model A+ASUS Tinker BoardRaspberry Pi 3 Model B+ODROID-C250010001500200025001451.451466.751671.801720.952524.801. Firefly ROC-RK3328-CC: $35 reported cost.2. Raspberry Pi 3 Model A+: $25 reported cost.3. ASUS Tinker Board: $65 reported cost.4. Raspberry Pi 3 Model B+: $35 reported cost.5. ODROID-C2: $60 reported cost.

GIMP

GIMP is an open-source image manipulaton program. This test profile will use the system-provided GIMP program otherwise on Windows relys upon a pre-packaged Windows binary from upstream GIMP.org. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.16Test: resizeOdroid XU41122334455SE +/- 0.31, N = 348.59

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.16Test: rotateOdroid XU420406080100SE +/- 1.62, N = 383.19

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.16Test: auto-levelsOdroid XU420406080100SE +/- 0.03, N = 375.64

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.8.16Test: unsharp-maskOdroid XU450100150200250SE +/- 4.00, N = 3212.16

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.6Test: resizePentium J5005510152025SE +/- 0.09, N = 320.43

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.6Test: rotatePentium J5005714212835SE +/- 0.04, N = 330.21

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.6Test: auto-levelsPentium J5005918273645SE +/- 0.10, N = 337.21

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.6Test: unsharp-maskPentium J50051020304050SE +/- 0.04, N = 343.06

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: resizePentium J5005 Clear Linux48121620SE +/- 0.04, N = 317.60

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: rotatePentium J5005 Clear Linux714212835SE +/- 0.02, N = 331.43

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: auto-levelsPentium J5005 Clear Linux918273645SE +/- 0.19, N = 338.68

OpenBenchmarking.orgSeconds, Fewer Is BetterGIMP 2.10.8Test: unsharp-maskPentium J5005 Clear Linux1020304050SE +/- 0.04, N = 345.14

Raspberry Pi 2 Model B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 20 November 2018 17:17 by user pi.

Raspberry Pi 3 Model B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 20 November 2018 06:02 by user pi.

Raspberry Pi 3 Model B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 19 November 2018 20:16 by user pi.

Raspberry Pi 3 Model A+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0, Memory: 431MB, Disk: 32GB SC32G, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 22 November 2018 16:40 by user pi.

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 20 November 2018 12:25 by user linaro.

Firefly ROC-RK3328-CC

Processor: Rockchip ARMv8 Cortex-A53 @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 21 November 2018 04:08 by user firefly.

ODROID-C2

Processor: Amlogic ARMv8 Cortex-A53 @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 21 November 2018 22:14 by user odroid.

Odroid XU4

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4 Hardkernel Odroid XU4, Memory: 2048MB, Disk: 32GB Wireless Stick + 64GB SR64G, Graphics: llvmpipe 2048MB, Monitor: IPS224

OS: Ubuntu 16.04, Kernel: 4.14.73-136 (armv7l), Desktop: MATE 1.12.1, Display Server: X Server 1.18.4, OpenGL: 3.3 Mesa 18.0.5 (LLVM 6.0 128 bits), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: usbhid.quirks=0x0eef:0x0005:0x0004
Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 24 November 2018 01:39 by user odroid.

Asrock J5005

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate powersave
Python Notes: Python 2.7.15+ + Python 3.6.7
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp

Testing initiated at 24 November 2018 13:26 by user tester.

Pentium J5005

Processor: Intel Pentium Silver J5005 @ 2.80GHz (4 Cores), Motherboard: ASRock J5005-ITX (P1.00 BIOS), Chipset: Intel Device 31f0, Memory: 16384MB, Disk: 32GB ADATA SP800 + 32GB Wireless Stick, Graphics: Intel UHD 605 3072MB (800MHz), Audio: Realtek ALC892, Monitor: IPS224, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 18.10, Kernel: 4.18.0-11-generic (x86_64), Desktop: Xfce 4.12, Display Server: X Server 1.20.1, Display Driver: modesetting 1.20.1, OpenGL: 4.5 Mesa 18.2.2, Compiler: GCC 8.2.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 2.7.15+ + Python 3.6.7
Security Notes: KPTI + __user pointer sanitization + Full generic retpoline IBPB IBRS_FW + SSB disabled via prctl and seccomp

Testing initiated at 24 November 2018 13:28 by user tester.

Pentium J5005 Clear Linux

Processor: Intel Pentium Silver J5005 @ 2.80GHz (4 Cores), Motherboard: ASRock J5005-ITX (P1.00 BIOS), Chipset: Intel Device 31f0, Memory: 8192MB, Disk: 250GB Crucial_CT250MX2 + 32GB Wireless Stick, Graphics: Intel UHD 605 3GB (800MHz), Audio: Realtek ALC892, Monitor: IPS224, Network: Realtek RTL8111/8168/8411

OS: Clear Linux OS 26730, Kernel: 4.19.6-669.native (x86_64), Desktop: GNOME Shell 3.30.2, Display Server: X Server 1.20.3, Display Driver: modesetting 1.20.3, OpenGL: 4.5 Mesa 19.0.0-devel, Vulkan: 1.1.90, Compiler: GCC 8.2.1 20180502 + Clang 7.0.0 + LLVM 7.0.0, File-System: ext4, Screen Resolution: 1920x1080

Environment Notes: CFFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl now-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl-sort-common-Wl--enable-new-dtags MESA_GLSL_CACHE_DISABLE=0 CFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags CXXFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wformat-Wformat-security-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-fno-semantic-interposition-ffat-lto-objects-fno-signed-zeros-fno-trapping-math-fassociative-math-Wl-sort-common-Wl--enable-new-dtags-fvisibility-inlines-hidden-Wl--enable-new-dtags FFLAGS=-g-O3-feliminate-unused-debug-types-pipe-Wall-Wp-D_FORTIFY_SOURCE=2-fexceptions-fstack-protector--param=ssp-buffer-size=32-Wl--copy-dt-needed-entries-m64-fasynchronous-unwind-tables-Wp-D_REENTRANT-ftree-loop-distribute-patterns-Wl-z-Wl relro-malign-data=abi-fno-semantic-interposition-ftree-vectorize-ftree-loop-vectorize-Wl--enable-new-dtags THEANO_FLAGS=floatX=float32 openmp=true gcc.cxxflags="-ftree-vectorize-mavx"
Compiler Notes: --build=x86_64-generic-linux --disable-libmpx --disable-libunwind-exceptions --disable-multiarch --disable-vtable-verify --enable-__cxa_atexit --enable-bootstrap --enable-clocale=gnu --enable-gnu-indirect-function --enable-languages=c,c++,fortran,go --enable-ld=default --enable-libstdcxx-pch --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --exec-prefix=/usr --includedir=/usr/include --target=x86_64-generic-linux --with-arch=westmere --with-glibc-version=2.19 --with-gnu-ld --with-isl --with-ppl=yes --with-tune=haswell
Processor Notes: Scaling Governor: intel_pstate performance
Python Notes: Python 3.7.1
Security Notes: KPTI + __user pointer sanitization + Enhanced IBRS IBPB

Testing initiated at 9 December 2018 17:12 by user tester.