Various ARM Linux Benchmarks - Spetember 2018

Various ARM board benchmarks... Tests for a future article on Phoronix.com by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1809186-RA-1809111RA60
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
RockPro64
September 17 2018
  6 Hours, 33 Minutes
Invert Behavior (Only Show Selected Data)
  8 Hours, 11 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H2+

Changed Memory to 493MB.

Changed Disk to 32GB SC32G.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskGraphicsAudioMonitorOSKernelCompilerFile-SystemScreen ResolutionDesktopDisplay ServerDisplay DriverVulkanSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1RockPro64Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.0ext41920x1080ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3927MB32GB GB2MWBCM2708Raspbian 9.44.14.62-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.14.14.50-v7+ (armv7l)ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34NVIDIA TEGRADELL P2415QUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5X Server 1.18.4NVIDIA 1.0.0GCC 5.4.0 201606093840x2160ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.2927MB32GB GB1QTBCM2708Raspbian 9.44.14.62-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 20170516656x416Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)Acer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 201705161920x1080AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)GCC 5.4.0 20160609Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC2048MB32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)LXDEGCC 7.3.01920x1080p60Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GRaspbian 9.44.14.53-00653-gc01abe8ba6bc (aarch64)X Server 1.19.2GCC 6.3.0 201705161920x1200ARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H532GB GB1QT4.18.0-rc3-gfc36def997cf-dirty (aarch64)ARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H31024MBUbuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.01920x1080493MB32GB SC32GVE228ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i2048MB32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)LXDEX Server 1.18.4GCC 4.9.21280x720ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM MaliUbuntu 16.043.10.107-190 (armv7l)GCC 5.4.0 201606091920x2160ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRA4.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.81920x1200SiFive RISC-V @ 1.42GHz (6 Cores)Pine64 RockPro642000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32GLG TVArch Linux ARM4.18.0-rc8-1 (aarch64)X Server 1.20.1GCC 8.2.0OpenBenchmarking.orgCompiler Details- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- RockPro64: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnuDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rwPython Details- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Jetson TX2: Python 2.7.12 + Python 3.5.2- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- Banana Pi M3: Python 2.7.9 + Python 3.4.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- Jetson TX1: Python 2.7.12 + Python 3.5.2- RockPro64: Python 3.7.0Processor Details- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- ODROID-C2: Scaling Governor: meson_cpufreq performance- Tinker Board: Scaling Governor: cpufreq-dt interactive- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- ODROID-C1+: Scaling Governor: meson_cpufreq performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- RockPro64: Scaling Governor: cpufreq-dt ondemandDisk Mount Options Details- Raspberry Pi 3 B+: data=ordered,noatime,rw- Raspberry Pi 2 B: data=ordered,noatime,rw- Jetson TX2: data=ordered,relatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Tinker Board: data=ordered,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024

Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1RockPro64Result OverviewPhoronix Test Suite100%353%607%860%1113%PyBenchFLAC Audio EncodingPerl BenchmarksPHPBenchLAME MP3 EncodingTinymembenchAOBenchZstd CompressionHierarchical INTegrationC-Ray

Various ARM Linux Benchmarks - Spetember 2018ttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingtinymembench: Standard Memcpycompress-7zip: Compress Speed Testhint: FLOATredis: GETredis: SETphpbench: PHP Benchmark Suitepgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writepybench: Total For Average Test Timesc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationaobench: 2048 x 2048 - Total Timecompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-flac: WAV To FLACencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpretergit: Time To Complete Common Git Commandsscikit-learn: Socionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 2 BJetson TX2Raspberry Pi 3 BODROID-C2Tinker BoardPine64 1GBFirefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+Banana Pi M3ODROID-C1+Jetson TX1RockPro6489.2812.4115439368441503762357211600533892231506416619386391133400931390.76406.391.570880610.0065884046.3789916.822.0912881796579571932407611503374016565261442092320741113290867336.07301.981.118339730.0074290151.8478510.941.109561125359526601131116721020836385613337907437518976671315534.59514.112.465045750.0134515597.32232837985650103988087660813432278133175144271793535767513445565.1595.910.487469040.0098703117.5715.662.0312971863500091352130671317643442066404092434923571543333934387.09352.661.294479020.0084208457.1984423.072.891688219867673261271547194581591766059719127751537599260822263.28266.801.118933610.0055119338.9966427.804.4215023472807553253263512187476639813309114292561048192573122.05145.590.694156800.0042808126.0647415.732.121377501852042555461598103698845554562019623429433521034352.20350.191.404496210.0102578652.648532.121566195161129612265608189623538022977263140301773934289848293.37296.201.313661230.0051476140.0465020.30209522095912138810295371525378555502603228761755891282808334.63300.961.493777500.0077608054.4195411.91133913013400372054779379272132440680308816234911219566.38518.512.575798690.0105771877.19151510.831.149121197346403332664229389415619407001383537.42536.622.266156290.0101096587.37224610.731.138271162346378802662229409416619756981407537.27535.902.273662230.0101216591.8373826546793537112421579881182021599016698764611069279.92266.352.596381130.0347324522114.151.469281477557298811673461005613405251993452377327201591457978344.23331.011.731624180.0081423169.23163145.055.963862452688381313484688333535111979160791222634885140116544178.86113.140.600710340.0023586923.664341836.80292394934888.59319017.45219557.437130411587.65114.9252111250.15235.07807.52240.79276.180.924795940.00849475152.55OpenBenchmarking.org

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox20406080100SE +/- 0.07, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.05, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.25, N = 4SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.07, N = 345.0514.1510.7310.8311.9120.3015.7327.8023.0715.6610.9416.8289.281. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext Developerbox0.11030.22060.33090.44120.55150.090.290.430.360.300.450.490.370.450.420.071. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Tinker Board: $56.85 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3Firefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext Developerbox0.0180.0360.0540.0720.090.010.030.050.040.040.080.050.060.050.011. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. Tinker Board: $56.85 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3Firefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox3691215SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 35.961.461.131.142.122.124.422.892.031.102.0912.411. (CC) gcc options: -ldl -lm -lpthread

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox80016002400320040001836.803862.00928.00738.00827.00912.001339.002095.001566.001377.001502.001688.001297.003798.00956.001288.001543.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox3K6K9K12K15K8265.8010374.002881.001064.002277.002278.002193.005535.007336.003093.004192.003604.001738.0013913.001177.001871.007359.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox11223344558.1018.9433.0830.4033.4846.5631.3226.4226.8137.076.9132.381.291. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox2K4K6K8K10KSE +/- 85.04, N = 6SE +/- 28.68, N = 3SE +/- 13.74, N = 3SE +/- 43.13, N = 9SE +/- 1.45, N = 3SE +/- 1.20, N = 3SE +/- 4.16, N = 3SE +/- 0.67, N = 3SE +/- 36.57, N = 3SE +/- 17.25, N = 3SE +/- 3.84, N = 3SE +/- 11.46, N = 3SE +/- 8.84, N = 3SE +/- 16.51, N = 3SE +/- 58.09, N = 329234526147726541162119713012209195134722198186356501125179693681. (CXX) g++ options: -pipe -lpthread

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox14284256709.4930.1446.4839.9032.5349.0939.0261.0734.9253.2410.2745.157.811. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox20M40M60M80M100MSE +/- 9860994.78, N = 6SE +/- 466387.18, N = 3SE +/- 359364.97, N = 3SE +/- 132627.22, N = 3SE +/- 1621.71, N = 3SE +/- 1696.71, N = 3SE +/- 9829.94, N = 3SE +/- 7375.88, N = 3SE +/- 19531.90, N = 3SE +/- 27122.74, N = 3SE +/- 3664.18, N = 3SE +/- 19085.92, N = 3SE +/- 73922.97, N = 3SE +/- 187708.64, N = 3SE +/- 113633.28, N = 3SE +/- 271590.74, N = 3SE +/- 3286.77, N = 394934888.5988381313.0055729881.0067935371.0034637880.0034640333.0034003720.0059121388.0061129612.0050185204.0080755325.0067673261.0050009135.00103988087.0035952660.0057957193.0044150376.001. (CC) gcc options: -O3 -march=native -lm

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox300K600K900K1200K1500K185289.661137344.511385515.201154677.77850093.001313808.621222592.241420498.241075031.951429240.78189072.691456943.0136791.981. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox140K280K420K560K700KSE +/- 3406.66, N = 3SE +/- 2915.59, N = 3SE +/- 1992.94, N = 12SE +/- 1833.04, N = 3SE +/- 336.63, N = 3SE +/- 263.42, N = 3SE +/- 3573.20, N = 6SE +/- 3541.46, N = 3SE +/- 4435.65, N = 3SE +/- 777.10, N = 3SE +/- 1229.44, N = 3SE +/- 2540.60, N = 3SE +/- 1911.33, N = 3SE +/- 1090.67, N = 3SE +/- 2599.96, N = 3319017.45484688.00167346.00124215.0054779.00102953.00265608.00255546.00326351.00271547.00213067.00660813.00113111.00240761.00235721.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox90K180K270K360K450KSE +/- 512.69, N = 3SE +/- 3890.46, N = 3SE +/- 1526.07, N = 5SE +/- 1043.53, N = 3SE +/- 313.11, N = 3SE +/- 405.28, N = 3SE +/- 335.35, N = 3SE +/- 1081.64, N = 3SE +/- 2798.54, N = 3SE +/- 2273.51, N = 3SE +/- 881.60, N = 3SE +/- 436.19, N = 3SE +/- 744.95, N = 3SE +/- 677.69, N = 3SE +/- 368.39, N = 3219557.43333535.00100561.0079881.0037927.0071525.00189623.00159810.00218747.00194581.00131764.00432278.0067210.00150337.00160053.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETJetson TX1ODROID-C1+ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox130026003900520065001016.143415.221369.482287.845312.165740.564313.696089.371201.506052.31196.431. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. Tinker Board: $56.85 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Jetson TX2: $549.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETJetson TX1ODROID-C1+ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox8001600240032004000699.252052.27948.181589.443792.463847.793091.043765.76785.973779.21133.381. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. AML-S905X-CC Le Potato: $45.00 reported cost.5. Firefly ROC-RK3328-CC: $50.00 reported cost.6. Tinker Board: $56.85 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Jetson TX2: $549.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox30K60K90K120K150KSE +/- 9690.22, N = 6SE +/- 1075.34, N = 3SE +/- 82.63, N = 3SE +/- 84.14, N = 3SE +/- 26.01, N = 3SE +/- 27.36, N = 3SE +/- 7.80, N = 3SE +/- 52.26, N = 3SE +/- 238.66, N = 3SE +/- 17.90, N = 3SE +/- 222.05, N = 3SE +/- 287.89, N = 3SE +/- 58.48, N = 3SE +/- 871.71, N = 3SE +/- 141.51, N = 3SE +/- 65.58, N = 3SE +/- 16.44, N = 3713041119793405218202266222664221324378555380236988663985917634420133175208364016538922

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox30060090012001500234.76694.941064.88888.07533.10841.221076.041167.95940.05983.71242.141009.6832.441. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyJetson TX1ODROID-C1+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox5010015020025033.71106.10122.2759.54234.1196.25189.7726.23164.0526.261. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Tinker Board: $56.85 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Jetson TX2: $549.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyRockPro64Jetson TX1ODROID-C1+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox7K14K21K28K35KSE +/- 203.37, N = 3SE +/- 112.24, N = 3SE +/- 17.10, N = 3SE +/- 32.74, N = 3SE +/- 8.74, N = 3SE +/- 9.36, N = 3SE +/- 143.40, N = 3SE +/- 103.97, N = 4SE +/- 61.95, N = 3SE +/- 29.83, N = 3SE +/- 57.37, N = 3SE +/- 115.45, N = 3SE +/- 64.76, N = 311587.6516079.005199.005502.002977.004555.0013309.006059.006640.0014427.003856.006526.0031506.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteRockPro64Jetson TX1ODROID-C1+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox9001800270036004500SE +/- 12.70, N = 6SE +/- 11.36, N = 3SE +/- 9.10, N = 12SE +/- 2.18, N = 3SE +/- 8.44, N = 12SE +/- 3.93, N = 3SE +/- 34.75, N = 12SE +/- 26.05, N = 12SE +/- 6.52, N = 12SE +/- 17.07, N = 3SE +/- 1.32, N = 3SE +/- 1.99, N = 6SE +/- 1.88, N = 3114.921222.00345.00603.00263.00456.001142.00719.00409.001793.00133.00144.004166.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteJetson TX1ODROID-C1+AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox5101520252.567.0413.405.2620.0911.4211.693.263.623.471. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. AML-S905X-CC Le Potato: $45.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Tinker Board: $56.85 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Jetson TX2: $549.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Socionext Developerbox: $1200.00 reported cost.

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox9K18K27K36K45KSE +/- 44.05, N = 3SE +/- 21.11, N = 3SE +/- 37.03, N = 3SE +/- 60.92, N = 3SE +/- 50.90, N = 3SE +/- 35.56, N = 3SE +/- 54.78, N = 3SE +/- 50.54, N = 3SE +/- 46.73, N = 3SE +/- 32.08, N = 3SE +/- 16.41, N = 3SE +/- 167.68, N = 3SE +/- 25.83, N = 3SE +/- 16.86, N = 3SE +/- 51.49, N = 3SE +/- 85.92, N = 3SE +/- 13.74, N = 3521163482377315990294092938940680228761403020196925612775243495357379072092319386

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox5M10M15M20M25M3027932.521164877.00735225.00881670.001627200.001029420.00701500.00526203.60804186.25851971.512946296.43832316.9423263200.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox9001800270036004500SE +/- 18.57, N = 3SE +/- 60.87, N = 9SE +/- 5.34, N = 3SE +/- 22.18, N = 3SE +/- 6.17, N = 3SE +/- 1.59, N = 3SE +/- 5.10, N = 3SE +/- 2.44, N = 3SE +/- 10.58, N = 3SE +/- 3.98, N = 3SE +/- 5.86, N = 3SE +/- 0.45, N = 3SE +/- 16.16, N = 3SE +/- 60.69, N = 9SE +/- 6.73, N = 3SE +/- 2.67, N = 3SE +/- 1.67, N = 31250.15851.002720.001669.004166.004156.003088.001755.001773.002342.001048.001537.002357.00675.004375.002074.00391.001. (CC) gcc options: -lm -lpthread -O3

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationJetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBODROID-C2Raspberry Pi 3 BRaspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox400800120016002000SE +/- 15.34, N = 9SE +/- 31.20, N = 3SE +/- 13.52, N = 5SE +/- 21.10, N = 3SE +/- 15.03, N = 3SE +/- 19.70, N = 9SE +/- 4.98, N = 3SE +/- 15.71, N = 3SE +/- 14.59, N = 5SE +/- 3.10, N = 3SE +/- 21.17, N = 5SE +/- 5.62, N = 3SE +/- 11.17, N = 3SE +/- 0.13, N = 340115918761975194016238919349435991543189711131331. (CXX) g++ options: -O3 -lpthread

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox150300450600750SE +/- 12.69, N = 6SE +/- 0.11, N = 3SE +/- 2.17, N = 3SE +/- 5.31, N = 3SE +/- 0.03, N = 3SE +/- 0.21, N = 3SE +/- 1.23, N = 3SE +/- 0.12, N = 3SE +/- 0.18, N = 3SE +/- 0.24, N = 3SE +/- 0.05, N = 3SE +/- 0.05, N = 3SE +/- 0.44, N = 3SE +/- 0.07, N = 3SE +/- 0.55, N = 3SE +/- 3.87, N = 6SE +/- 0.28, N = 3235.07165.00457.00461.00698.00700.00491.00282.00289.00352.00192.00260.00333.00134.00667.00290.00400.001. (CC) gcc options: -lm -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19RockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox30060090012001500SE +/- 13.18, N = 4SE +/- 1.94, N = 3SE +/- 6.01, N = 3SE +/- 3.00, N = 3SE +/- 1.50, N = 3SE +/- 0.40, N = 3SE +/- 1.72, N = 3SE +/- 1.29, N = 3SE +/- 2.33, N = 3SE +/- 0.98, N = 3SE +/- 0.74, N = 3SE +/- 1.06, N = 3SE +/- 0.31, N = 3SE +/- 0.02, N = 3SE +/- 6.35, N = 3SE +/- 0.57, N = 3SE +/- 2.72, N = 3807.52441.00978.001069.001407.001383.001219.00808.00848.001034.00573.00822.00934.00455.001315.00867.00931.00-llzma -llz4-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox120240360480600SE +/- 8.06, N = 10SE +/- 0.39, N = 5SE +/- 1.72, N = 5SE +/- 1.17, N = 5SE +/- 0.65, N = 5SE +/- 0.68, N = 5SE +/- 0.29, N = 5SE +/- 0.86, N = 5SE +/- 1.63, N = 5SE +/- 0.17, N = 5SE +/- 1.28, N = 5SE +/- 1.35, N = 5SE +/- 0.55, N = 5SE +/- 0.17, N = 5SE +/- 2.05, N = 5SE +/- 0.93, N = 5SE +/- 0.03, N = 5240.7978.86344.23279.92537.27537.42566.38334.63293.37352.20122.05263.28387.0965.15534.59336.07390.76-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3RockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox120240360480600SE +/- 5.13, N = 3SE +/- 0.15, N = 3SE +/- 0.99, N = 3SE +/- 2.53, N = 3SE +/- 0.29, N = 3SE +/- 0.28, N = 3SE +/- 0.09, N = 3SE +/- 0.09, N = 3SE +/- 0.24, N = 3SE +/- 0.11, N = 3SE +/- 0.06, N = 3SE +/- 2.55, N = 3SE +/- 0.10, N = 3SE +/- 0.11, N = 3SE +/- 0.40, N = 3SE +/- 0.49, N = 3SE +/- 0.07, N = 3276.18113.14331.01266.35535.90536.62518.51300.96296.20350.19145.59266.80352.6695.91514.11301.98406.39-lncurses-lncurses1. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox0.58421.16841.75262.33682.921SE +/- 0.24776293, N = 6SE +/- 0.00322779, N = 3SE +/- 0.06022970, N = 6SE +/- 0.02860806, N = 3SE +/- 0.00906752, N = 3SE +/- 0.00913039, N = 3SE +/- 0.01160841, N = 3SE +/- 0.00368669, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00496104, N = 3SE +/- 0.00065111, N = 3SE +/- 0.02171209, N = 3SE +/- 0.00473476, N = 3SE +/- 0.00383151, N = 3SE +/- 0.04245993, N = 9SE +/- 0.01837187, N = 4SE +/- 0.00683757, N = 30.924795940.600710341.731624182.596381132.273662232.266156292.575798691.493777501.313661231.404496210.694156801.118933611.294479020.487469042.465045751.118339731.57088061

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterRockPro64Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox0.00780.01560.02340.03120.039SE +/- 0.00007220, N = 3SE +/- 0.00001414, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00011530, N = 3SE +/- 0.00001117, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00008543, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00001616, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00012375, N = 3SE +/- 0.00021832, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00001488, N = 30.008494750.002358690.008142310.034732450.010121650.010109650.010577180.007760800.005147610.010257860.004280810.005511930.008420840.009870310.013451550.007429010.00658840

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsRockPro64Jetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox306090120150SE +/- 25.10, N = 6SE +/- 0.67, N = 12SE +/- 0.83, N = 12SE +/- 0.78, N = 3SE +/- 1.30, N = 12SE +/- 1.24, N = 12SE +/- 0.94, N = 12SE +/- 0.91, N = 12SE +/- 0.83, N = 3SE +/- 0.68, N = 12SE +/- 1.18, N = 12SE +/- 1.07, N = 3SE +/- 0.20, N = 3SE +/- 1.28, N = 12SE +/- 1.49, N = 12SE +/- 0.01, N = 3152.5523.6669.2391.8387.3777.1954.4140.0452.6426.0638.9957.1917.5797.3251.8446.371. RockPro64: git version 2.19.02. Jetson TX1: git version 2.7.43. ODROID-C1+: git version 2.7.44. ALL-H3-CC H2+: git version 2.17.15. ALL-H3-CC H3: git version 2.17.16. ALL-H3-CC H5: git version 2.11.07. AML-S905X-CC Le Potato: git version 2.11.08. Firefly ROC-RK3328-CC: git version 2.17.19. Pine64 1GB: git version 2.7.410. Tinker Board: git version 2.11.011. ODROID-C2: git version 2.17.112. Raspberry Pi 3 B: git version 2.11.013. Jetson TX2: git version 2.7.414. Raspberry Pi 2 B: git version 2.11.015. Raspberry Pi 3 B+: git version 2.11.016. Socionext Developerbox: git version 2.17.1

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1Jetson TX1ODROID-C1+Banana Pi M3ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCPine64 1GBTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 2 BRaspberry Pi 3 B+Socionext Developerbox5001000150020002500SE +/- 1.69, N = 3SE +/- 2.27, N = 3SE +/- 0.29, N = 3SE +/- 1.01, N = 3SE +/- 1.25, N = 3SE +/- 1.54, N = 3SE +/- 1.06, N = 3SE +/- 0.51, N = 3SE +/- 1.43, N = 3SE +/- 1.01, N = 3SE +/- 0.80, N = 3SE +/- 7.83, N = 3SE +/- 1.26, N = 3SE +/- 0.74, N = 34341631221224615159546508534746648442328785899

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox100K200K300K400K500K405918.49133280.00104150.00124680.00123520.0078975.0088650.0059578.8096754.1582471.43371243.2582503.72469200.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext Developerbox40K80K120K160K200K191272.9977959.0049375.0058200.0064920.0040095.0046700.0037707.0553989.5744275.14159600.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox100K200K300K400K500K78703.3522393.0017450.0021000.0019640.0012690.0014450.0010915.2016367.0011651.6773698.6611536.20480000.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Jetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox200K400K600K800K1000K210352.5947922.0035175.0041490.0048760.0036360.0042400.0032575.0551744.9032680.66250245.4534489.261117200.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox100K200K300K400K500K37615.4316867.2713431.7516122.6022655.2015058.3514668.506938.5416573.4813544.2835831.8513368.86468912.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Jetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox100K200K300K400K500K53966.6516219.4913397.5016098.6020740.4013543.2014810.008276.7916795.0612339.5752749.5412012.76487668.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox400800120016002000286.5384.8556.8467.98103.0367.2265.6839.4670.4445.29268.1044.491885.061. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox2468101.130.400.250.300.420.350.260.240.350.295.430.307.911. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsJetson TX1ODROID-C1+ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BJetson TX2Raspberry Pi 3 B+Socionext Developerbox12K24K36K48K60K11285.583392.272295.752621.103087.602448.452002.001481.512454.422001.089663.322062.2055644.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H2+: $25.00 reported cost.4. ALL-H3-CC H3: $30.00 reported cost.5. ALL-H3-CC H5: $40.00 reported cost.6. AML-S905X-CC Le Potato: $45.00 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. Tinker Board: $56.85 reported cost.9. ODROID-C2: $62.95 reported cost.10. Raspberry Pi 3 B: $34.99 reported cost.11. Jetson TX2: $549.99 reported cost.12. Raspberry Pi 3 B+: $39.78 reported cost.13. Socionext Developerbox: $1200.00 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Jetson TX1ODROID-C1+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoFirefly ROC-RK3328-CCTinker BoardODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext Developerbox200K400K600K800K1000K207013.6679919.0067380.0060600.0042930.0032500.0026946.9041798.8029531.5631227.301078800.001. Jetson TX1: $476.99 reported cost.2. ODROID-C1+: $49.00 reported cost.3. ALL-H3-CC H3: $30.00 reported cost.4. ALL-H3-CC H5: $40.00 reported cost.5. AML-S905X-CC Le Potato: $45.00 reported cost.6. Firefly ROC-RK3328-CC: $50.00 reported cost.7. Tinker Board: $56.85 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 September 2018 15:59 by user pi.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Testing initiated at 17 September 2018 20:13 by user andreas.