Various ARM Linux Benchmarks - Spetember 2018

Various ARM board benchmarks... Tests for a future article on Phoronix.com by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1809186-RA-1809111RA60
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
AML-S905X-CC Le Potato
September 03 2018
  6 Hours, 58 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
RockPro64
September 17 2018
  6 Hours, 33 Minutes
Invert Behavior (Only Show Selected Data)
  8 Hours, 11 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H3

Changed Memory to 1024MB.

Changed Disk to 32GB GB1QT.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskMonitorGraphicsAudioOSKernelCompilerFile-SystemScreen ResolutionDisplay ServerDesktopDisplay DriverVulkanALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64ARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H3493MB32GB SC32GVE228Ubuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.0ext41920x10801024MB32GB GB1QTARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.44.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516Unknown @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32GAcer P243W4.14.53-00653-gc01abe8ba6bc (aarch64)LXDE1920x1200ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)X Server 1.18.4GCC 4.9.21280x720Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)GCC 7.3.01920x1080p60ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.8GCC 5.4.0 201606091920x1200ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34DELL P2415Q3840x2160ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)1920x2160Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)X Server 1.18.4GCC 5.4.0 201606091920x1080ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.44.14.50-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QT4.14.62-v7+ (armv7l)656x416ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1920x1200Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.01920x1080ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTAcer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516SiFive RISC-V @ 1.42GHz (6 Cores)Pine64 RockPro644096MB2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32GLG TVArch Linux ARM4.18.0-rc8-1 (aarch64)X Server 1.20.1GCC 8.2.0OpenBenchmarking.orgCompiler Details- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- AML-S905X-CC Le Potato: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- RockPro64: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnuProcessor Details- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- AML-S905X-CC Le Potato: Scaling Governor: arm-big-little ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID-C1+: Scaling Governor: meson_cpufreq performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Tinker Board: Scaling Governor: cpufreq-dt interactive- RockPro64: Scaling Governor: cpufreq-dt ondemandPython Details- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- AML-S905X-CC Le Potato: Python 2.7.13 + Python 3.5.3- Banana Pi M3: Python 2.7.9 + Python 3.4.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- RockPro64: Python 3.7.0Disk Mount Options Details- Jetson TX2: data=ordered,relatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024- Raspberry Pi 2 B: data=ordered,noatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- Raspberry Pi 3 B+: data=ordered,noatime,rw- Tinker Board: data=ordered,noatime,rwDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rw

ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro64Result OverviewPhoronix Test Suite100%353%607%860%1113%PyBenchFLAC Audio EncodingPerl BenchmarksPHPBenchLAME MP3 EncodingTinymembenchAOBenchZstd CompressionHierarchical INTegrationC-Ray

Various ARM Linux Benchmarks - Spetember 2018compress-7zip: Compress Speed Testaobench: 2048 x 2048 - Total Timec-ray: Total Time - 4K, 16 Rays Per Pixelencode-flac: WAV To FLACgit: Time To Complete Common Git Commandshint: FLOATencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpreterphpbench: PHP Benchmark Suitepgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writeprimesieve: 1e12 Prime Number Generationpybench: Total For Average Test Timesredis: GETredis: SETscikit-learn: tinymembench: Standard Memcpyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingcompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5AML-S905X-CC Le PotatoBanana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardRockPro6411626984166537.2791.8334637880535.902.273662230.010121652662219752940982710.731.13140711977004156537.4287.3734640333536.622.266156290.0101096526642194029389224691210.831.14138313014913088566.3877.1934003720518.512.575798690.010577182132416234068054779379271515133911.91121922092821755334.6354.4159121388300.961.493777500.007760803785555026038912287610295371525954209520.3080826544611669279.9267935371266.352.596381130.03473245182028761599012421579881221738106919512891773293.3740.0461129612296.201.313661230.005147615380229772639341403026560818962365015662.12848452616585178.8623.6688381313113.140.600710340.002358691119791607912224016348484688333535434386245.055.96441565013467565.1517.5710398808795.910.487469040.009870311331751442717935357660813432278379845514774572720344.2369.2355729881331.011.731624180.00814231340525199345159123773167346100561163192814.151.4697821982601537263.2838.9967673261266.801.118933610.0055119359176605971959912775271547194581664168823.072.898223522342352.2052.6450185204350.191.404496210.0102578636988455545694320196255546159810853137715.732.12103411256674375534.5997.3235952660514.112.465045750.0134515520836385613318973790711311167210232895610.941.10131518633332357387.0957.1950009135352.661.294479020.00842084344206640409154324349213067131764844129715.662.0393417962902074336.0751.8457957193301.981.118339730.00742901401656526144111320923240761150337785128816.822.098679368400391390.7646.3744150376406.391.570880610.006588403892231506416613319386235721160053899154389.2812.4193134721921048122.0526.0680755325145.590.694156800.00428081663981330911429256326351218747474150227.804.425732923235.071250.15240.79152.5594934888.59276.180.924795940.008494757130411587.65114.925211319017.45219557.431836.80807.52OpenBenchmarking.org

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+2K4K6K8K10KSE +/- 36.57, N = 3SE +/- 58.09, N = 3SE +/- 85.04, N = 6SE +/- 16.51, N = 3SE +/- 3.84, N = 3SE +/- 8.84, N = 3SE +/- 17.25, N = 3SE +/- 13.74, N = 3SE +/- 11.46, N = 3SE +/- 28.68, N = 3SE +/- 0.67, N = 3SE +/- 43.13, N = 9SE +/- 4.16, N = 3SE +/- 1.20, N = 3SE +/- 1.45, N = 334729368292317961863112521981477565045261951265422091301119711621. (CXX) g++ options: -pipe -lpthread

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+142842567061.077.8145.1553.2434.9230.1410.279.4939.0249.0932.5339.9046.481. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+150300450600750SE +/- 0.05, N = 3SE +/- 0.28, N = 3SE +/- 12.69, N = 6SE +/- 3.87, N = 6SE +/- 0.44, N = 3SE +/- 0.55, N = 3SE +/- 0.24, N = 3SE +/- 0.05, N = 3SE +/- 2.17, N = 3SE +/- 0.07, N = 3SE +/- 0.11, N = 3SE +/- 0.18, N = 3SE +/- 5.31, N = 3SE +/- 0.12, N = 3SE +/- 1.23, N = 3SE +/- 0.21, N = 3SE +/- 0.03, N = 3192.00400.00235.07290.00333.00667.00352.00260.00457.00134.00165.00289.00461.00282.00491.00700.00698.001. (CC) gcc options: -lm -O3

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+100K200K300K400K500K10915.20480000.0011536.2011651.6716367.0022393.0073698.6678703.3514450.0012690.0019640.0021000.0017450.001. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+9001800270036004500SE +/- 5.86, N = 3SE +/- 1.67, N = 3SE +/- 18.57, N = 3SE +/- 2.67, N = 3SE +/- 16.16, N = 3SE +/- 6.73, N = 3SE +/- 3.98, N = 3SE +/- 0.45, N = 3SE +/- 5.34, N = 3SE +/- 60.69, N = 9SE +/- 60.87, N = 9SE +/- 10.58, N = 3SE +/- 22.18, N = 3SE +/- 2.44, N = 3SE +/- 5.10, N = 3SE +/- 1.59, N = 3SE +/- 6.17, N = 31048.00391.001250.152074.002357.004375.002342.001537.002720.00675.00851.001773.001669.001755.003088.004156.004166.001. (CC) gcc options: -lm -lpthread -O3

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+100K200K300K400K500K59578.80469200.0082503.7282471.4396754.15133280.00371243.25405918.4988650.0078975.00123520.00124680.00104150.001. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+120240360480600SE +/- 1.28, N = 5SE +/- 0.03, N = 5SE +/- 8.06, N = 10SE +/- 0.93, N = 5SE +/- 0.55, N = 5SE +/- 2.05, N = 5SE +/- 0.17, N = 5SE +/- 1.35, N = 5SE +/- 1.72, N = 5SE +/- 0.17, N = 5SE +/- 0.39, N = 5SE +/- 1.63, N = 5SE +/- 1.17, N = 5SE +/- 0.86, N = 5SE +/- 0.29, N = 5SE +/- 0.68, N = 5SE +/- 0.65, N = 5122.05390.76240.79336.07387.09534.59352.20263.28344.2365.1578.86293.37279.92334.63566.38537.42537.27-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+100K200K300K400K500K6938.54468912.0013368.8613544.2816573.4816867.2735831.8537615.4314668.5015058.3522655.2016122.6013431.751. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+306090120150SE +/- 0.68, N = 12SE +/- 0.01, N = 3SE +/- 25.10, N = 6SE +/- 1.49, N = 12SE +/- 1.07, N = 3SE +/- 1.28, N = 12SE +/- 0.83, N = 3SE +/- 1.18, N = 12SE +/- 0.83, N = 12SE +/- 0.20, N = 3SE +/- 0.67, N = 12SE +/- 0.91, N = 12SE +/- 0.94, N = 12SE +/- 1.24, N = 12SE +/- 1.30, N = 12SE +/- 0.78, N = 326.0646.37152.5551.8457.1997.3252.6438.9969.2317.5723.6640.0454.4177.1987.3791.831. Tinker Board: git version 2.11.02. Socionext Developerbox: git version 2.17.13. RockPro64: git version 2.19.04. Raspberry Pi 3 B+: git version 2.11.05. Raspberry Pi 3 B: git version 2.11.06. Raspberry Pi 2 B: git version 2.11.07. Pine64 1GB: git version 2.7.48. ODROID-C2: git version 2.17.19. ODROID-C1+: git version 2.7.410. Jetson TX2: git version 2.7.411. Jetson TX1: git version 2.7.412. Firefly ROC-RK3328-CC: git version 2.17.113. AML-S905X-CC Le Potato: git version 2.11.014. ALL-H3-CC H5: git version 2.11.015. ALL-H3-CC H3: git version 2.17.116. ALL-H3-CC H2+: git version 2.17.1

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+12K24K36K48K60K1481.5155644.002062.202001.082454.423392.279663.3211285.582002.002448.453087.602621.102295.751. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+20M40M60M80M100MSE +/- 3664.18, N = 3SE +/- 3286.77, N = 3SE +/- 9860994.78, N = 6SE +/- 271590.74, N = 3SE +/- 73922.97, N = 3SE +/- 113633.28, N = 3SE +/- 27122.74, N = 3SE +/- 19085.92, N = 3SE +/- 359364.97, N = 3SE +/- 187708.64, N = 3SE +/- 466387.18, N = 3SE +/- 19531.90, N = 3SE +/- 132627.22, N = 3SE +/- 7375.88, N = 3SE +/- 9829.94, N = 3SE +/- 1696.71, N = 3SE +/- 1621.71, N = 380755325.0044150376.0094934888.5957957193.0050009135.0035952660.0050185204.0067673261.0055729881.00103988087.0088381313.0061129612.0067935371.0059121388.0034003720.0034640333.0034637880.001. (CC) gcc options: -O3 -march=native -lm

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+300K600K900K1200K1500K1420498.2436791.981456943.011429240.781075031.951137344.51189072.69185289.661222592.241313808.62850093.001154677.771385515.201. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3Tinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+120240360480600SE +/- 0.06, N = 3SE +/- 0.07, N = 3SE +/- 5.13, N = 3SE +/- 0.49, N = 3SE +/- 0.10, N = 3SE +/- 0.40, N = 3SE +/- 0.11, N = 3SE +/- 2.55, N = 3SE +/- 0.99, N = 3SE +/- 0.11, N = 3SE +/- 0.15, N = 3SE +/- 0.24, N = 3SE +/- 2.53, N = 3SE +/- 0.09, N = 3SE +/- 0.09, N = 3SE +/- 0.28, N = 3SE +/- 0.29, N = 3145.59406.39276.18301.98352.66514.11350.19266.80331.0195.91113.14296.20266.35300.96518.51536.62535.90-lncurses-lncurses1. (CC) gcc options: -lm

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3Tinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+100K200K300K400K500K8276.79487668.0012012.7612339.5716795.0616219.4952749.5453966.6514810.0013543.2020740.4016098.6013397.501. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+0.58421.16841.75262.33682.921SE +/- 0.00065111, N = 3SE +/- 0.00683757, N = 3SE +/- 0.24776293, N = 6SE +/- 0.01837187, N = 4SE +/- 0.00473476, N = 3SE +/- 0.04245993, N = 9SE +/- 0.00496104, N = 3SE +/- 0.02171209, N = 3SE +/- 0.06022970, N = 6SE +/- 0.00383151, N = 3SE +/- 0.00322779, N = 3SE +/- 0.01051258, N = 3SE +/- 0.02860806, N = 3SE +/- 0.00368669, N = 3SE +/- 0.01160841, N = 3SE +/- 0.00913039, N = 3SE +/- 0.00906752, N = 30.694156801.570880610.924795941.118339731.294479022.465045751.404496211.118933611.731624180.487469040.600710341.313661232.596381131.493777502.575798692.266156292.27366223

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+0.00780.01560.02340.03120.039SE +/- 0.00014579, N = 12SE +/- 0.00001488, N = 3SE +/- 0.00007220, N = 3SE +/- 0.00021301, N = 12SE +/- 0.00021052, N = 11SE +/- 0.00021832, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00001616, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00012375, N = 3SE +/- 0.00001414, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00011530, N = 3SE +/- 0.00008543, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001117, N = 30.004280810.006588400.008494750.007429010.008420840.013451550.010257860.005511930.008142310.009870310.002358690.005147610.034732450.007760800.010577180.010109650.01012165

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+40080012001600200039.461885.0644.4945.2970.4484.85268.10286.5365.6867.22103.0367.9856.841. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+2468100.247.910.300.290.350.405.431.130.260.350.420.300.251. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+30K60K90K120K150KSE +/- 222.05, N = 3SE +/- 16.44, N = 3SE +/- 9690.22, N = 6SE +/- 65.58, N = 3SE +/- 58.48, N = 3SE +/- 141.51, N = 3SE +/- 17.90, N = 3SE +/- 287.89, N = 3SE +/- 82.63, N = 3SE +/- 871.71, N = 3SE +/- 1075.34, N = 3SE +/- 238.66, N = 3SE +/- 84.14, N = 3SE +/- 52.26, N = 3SE +/- 7.80, N = 3SE +/- 27.36, N = 3SE +/- 26.01, N = 3663983892271304401653442020836369885917634052133175111979538021820237855213242664226622

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+300600900120015001167.9532.441009.68983.71940.05694.94242.14234.761076.04841.22533.10888.071064.881. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le Potato7K14K21K28K35KSE +/- 143.40, N = 3SE +/- 64.76, N = 3SE +/- 203.37, N = 3SE +/- 115.45, N = 3SE +/- 61.95, N = 3SE +/- 57.37, N = 3SE +/- 9.36, N = 3SE +/- 103.97, N = 4SE +/- 17.10, N = 3SE +/- 29.83, N = 3SE +/- 112.24, N = 3SE +/- 8.74, N = 3SE +/- 32.74, N = 313309.0031506.0011587.656526.006640.003856.004555.006059.005199.0014427.0016079.002977.005502.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le Potato9001800270036004500SE +/- 34.75, N = 12SE +/- 1.88, N = 3SE +/- 12.70, N = 6SE +/- 1.99, N = 6SE +/- 6.52, N = 12SE +/- 1.32, N = 3SE +/- 3.93, N = 3SE +/- 26.05, N = 12SE +/- 9.10, N = 12SE +/- 17.07, N = 3SE +/- 11.36, N = 3SE +/- 8.44, N = 12SE +/- 2.18, N = 31142.004166.00114.92144.00409.00133.00456.00719.00345.001793.001222.00263.00603.001. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le Potato50100150200250234.1126.26164.05189.7796.25106.1026.2333.7159.54122.271. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le Potato51015202520.093.473.6211.6911.427.043.262.565.2613.401. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+400800120016002000SE +/- 0.13, N = 3SE +/- 11.17, N = 3SE +/- 21.17, N = 5SE +/- 5.62, N = 3SE +/- 14.59, N = 5SE +/- 3.10, N = 3SE +/- 31.20, N = 3SE +/- 15.34, N = 9SE +/- 15.71, N = 3SE +/- 13.52, N = 5SE +/- 4.98, N = 3SE +/- 19.70, N = 9SE +/- 15.03, N = 3SE +/- 21.10, N = 313311131543189794359915914019348768911623194019751. (CXX) g++ options: -O3 -lpthread

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+40K80K120K160K200K159600.0044275.1453989.5737707.0577959.00191272.9946700.0040095.0064920.0058200.0049375.001. Socionext Developerbox: $1200.00 reported cost.2. Raspberry Pi 3 B+: $39.78 reported cost.3. Raspberry Pi 3 B: $34.99 reported cost.4. ODROID-C2: $62.95 reported cost.5. ODROID-C1+: $49.00 reported cost.6. Jetson TX1: $476.99 reported cost.7. Firefly ROC-RK3328-CC: $50.00 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+9K18K27K36K45KSE +/- 16.41, N = 3SE +/- 13.74, N = 3SE +/- 44.05, N = 3SE +/- 85.92, N = 3SE +/- 25.83, N = 3SE +/- 51.49, N = 3SE +/- 32.08, N = 3SE +/- 167.68, N = 3SE +/- 37.03, N = 3SE +/- 16.86, N = 3SE +/- 21.11, N = 3SE +/- 46.73, N = 3SE +/- 60.92, N = 3SE +/- 50.54, N = 3SE +/- 54.78, N = 3SE +/- 35.56, N = 3SE +/- 50.90, N = 3925619386521120923243493790720196127752377353576348140301599022876406802938929409

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+5M10M15M20M25M526203.6023263200.00832316.94851971.51804186.251164877.002946296.433027932.52701500.001029420.001627200.00881670.00735225.001. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5140K280K420K560K700KSE +/- 4435.65, N = 3SE +/- 2599.96, N = 3SE +/- 3406.66, N = 3SE +/- 1090.67, N = 3SE +/- 1229.44, N = 3SE +/- 1911.33, N = 3SE +/- 3541.46, N = 3SE +/- 777.10, N = 3SE +/- 1992.94, N = 12SE +/- 2540.60, N = 3SE +/- 2915.59, N = 3SE +/- 3573.20, N = 6SE +/- 1833.04, N = 3SE +/- 263.42, N = 3SE +/- 336.63, N = 3326351.00235721.00319017.45240761.00213067.00113111.00255546.00271547.00167346.00660813.00484688.00265608.00124215.00102953.0054779.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H590K180K270K360K450KSE +/- 2798.54, N = 3SE +/- 368.39, N = 3SE +/- 512.69, N = 3SE +/- 677.69, N = 3SE +/- 881.60, N = 3SE +/- 744.95, N = 3SE +/- 1081.64, N = 3SE +/- 2273.51, N = 3SE +/- 1526.07, N = 5SE +/- 436.19, N = 3SE +/- 3890.46, N = 3SE +/- 335.35, N = 3SE +/- 1043.53, N = 3SE +/- 405.28, N = 3SE +/- 313.11, N = 3218747.00160053.00219557.43150337.00131764.0067210.00159810.00194581.00100561.00432278.00333535.00189623.0079881.0071525.0037927.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5130026003900520065005740.56196.436052.316089.374313.693415.221201.501016.145312.162287.841369.481. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H580016002400320040003847.79133.383779.213765.763091.042052.27785.97699.253792.461589.44948.181. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1Tinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H35001000150020002500SE +/- 1.43, N = 3SE +/- 0.74, N = 3SE +/- 1.26, N = 3SE +/- 0.80, N = 3SE +/- 7.83, N = 3SE +/- 0.51, N = 3SE +/- 1.01, N = 3SE +/- 2.27, N = 3SE +/- 1.69, N = 3SE +/- 1.06, N = 3SE +/- 0.29, N = 3SE +/- 1.54, N = 3SE +/- 1.25, N = 3SE +/- 1.01, N = 34748997858442328853664163143465022195415152246

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -Tinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3200K400K600K800K1000K26946.901078800.0031227.3029531.5641798.8079919.00207013.6632500.0042930.0060600.0067380.001. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX1: $476.99 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. AML-S905X-CC Le Potato: $45.00 reported cost.10. ALL-H3-CC H5: $40.00 reported cost.11. ALL-H3-CC H3: $30.00 reported cost.

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+80016002400320040001502.001543.001836.801288.001297.00956.001377.001688.00928.003798.003862.001566.00738.002095.001339.00912.00827.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetTinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+3K6K9K12K15K4192.007359.008265.801871.001738.001177.003093.003604.002881.0013913.0010374.007336.001064.005535.002193.002278.002277.001. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+112233445526.421.2932.3837.0726.8118.946.918.1031.3246.5633.4830.4033.081. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX1AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+20406080100SE +/- 0.02, N = 3SE +/- 0.07, N = 3SE +/- 0.03, N = 3SE +/- 0.25, N = 4SE +/- 0.02, N = 3SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.07, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 327.8089.2816.8215.6610.9415.7323.0714.1545.0520.3011.9110.8310.731. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX1AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+0.11030.22060.33090.44120.55150.490.070.420.450.370.290.090.450.300.360.431. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX1: $476.99 reported cost.8. AML-S905X-CC Le Potato: $45.00 reported cost.9. ALL-H3-CC H5: $40.00 reported cost.10. ALL-H3-CC H3: $30.00 reported cost.11. ALL-H3-CC H2+: $25.00 reported cost.

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCALL-H3-CC H3ALL-H3-CC H2+3691215SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 34.4212.412.092.031.102.122.891.465.962.121.141.131. (CC) gcc options: -ldl -lm -lpthread

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingTinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX1Firefly ROC-RK3328-CCALL-H3-CC H3ALL-H3-CC H2+0.0180.0360.0540.0720.090.080.010.050.060.050.030.010.040.040.051. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX1: $476.99 reported cost.8. Firefly ROC-RK3328-CC: $50.00 reported cost.9. ALL-H3-CC H3: $30.00 reported cost.10. ALL-H3-CC H2+: $25.00 reported cost.

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Tinker BoardSocionext DeveloperboxRockPro64Raspberry Pi 3 B+Raspberry Pi 3 BRaspberry Pi 2 BPine64 1GBODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCBanana Pi M3AML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+30060090012001500SE +/- 0.74, N = 3SE +/- 2.72, N = 3SE +/- 13.18, N = 4SE +/- 0.57, N = 3SE +/- 0.31, N = 3SE +/- 6.35, N = 3SE +/- 0.98, N = 3SE +/- 1.06, N = 3SE +/- 6.01, N = 3SE +/- 0.02, N = 3SE +/- 1.94, N = 3SE +/- 2.33, N = 3SE +/- 3.00, N = 3SE +/- 1.29, N = 3SE +/- 1.72, N = 3SE +/- 0.40, N = 3SE +/- 1.50, N = 3573.00931.00807.52867.00934.001315.001034.00822.00978.00455.00441.00848.001069.00808.001219.001383.001407.00-llzma-llzma-llzma -llz4-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19Tinker BoardSocionext DeveloperboxRaspberry Pi 3 B+Raspberry Pi 3 BODROID-C2ODROID-C1+Jetson TX2Jetson TX1Firefly ROC-RK3328-CCAML-S905X-CC Le PotatoALL-H3-CC H5ALL-H3-CC H3ALL-H3-CC H2+200K400K600K800K1000K32575.051117200.0034489.2632680.6651744.9047922.00250245.45210352.5942400.0036360.0048760.0041490.0035175.001. Tinker Board: $56.85 reported cost.2. Socionext Developerbox: $1200.00 reported cost.3. Raspberry Pi 3 B+: $39.78 reported cost.4. Raspberry Pi 3 B: $34.99 reported cost.5. ODROID-C2: $62.95 reported cost.6. ODROID-C1+: $49.00 reported cost.7. Jetson TX2: $549.99 reported cost.8. Jetson TX1: $476.99 reported cost.9. Firefly ROC-RK3328-CC: $50.00 reported cost.10. AML-S905X-CC Le Potato: $45.00 reported cost.11. ALL-H3-CC H5: $40.00 reported cost.12. ALL-H3-CC H3: $30.00 reported cost.13. ALL-H3-CC H2+: $25.00 reported cost.

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

AML-S905X-CC Le Potato

Processor: Unknown @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G, Monitor: Acer P243W

OS: Raspbian 9.4, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 3 September 2018 15:59 by user pi.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

RockPro64

Processor: SiFive RISC-V @ 1.42GHz (6 Cores), Motherboard: Pine64 RockPro64, Memory: 4096MB, Disk: 2000GB SAMSUNG HD204UI + 1000GB Seagate ST1000LM024 HN-M + 32GB SU32G, Monitor: LG TV

OS: Arch Linux ARM, Kernel: 4.18.0-rc8-1 (aarch64), Display Server: X Server 1.20.1, Compiler: GCC 8.2.0, File-System: ext4

Compiler Notes: --build=aarch64-unknown-linux-gnu --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-multilib --disable-werror --enable-__cxa_atexit --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-fix-cortex-a53-835769 --enable-fix-cortex-a53-843419 --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-languages=c,c++,fortran,go,lto,objc,obj-c++ --enable-lto --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-unknown-linux-gnu --mandir=/usr/share/man --with-arch=armv8-a --with-isl --with-linker-hash-style=gnu
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 3.7.0

Testing initiated at 17 September 2018 20:13 by user andreas.