Raspberry Pi 3 Linux Benchmark Comparison, MickMake Orange Pi Zero 512MB

Plus Orange Pi Zero

MickMake Orange Pi Zero 512MB: MickMake Orange Pi Zero 512MB

Raspberry Pi 3 Linux Benchmark Comparison: Extending Phoronix.com comparo to Orange Pi Zero

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero and other SBCs

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1612154-TA-1603058GA04
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 3
March 04 2016
 
Raspberry Pi 2
January 06 2016
 
Raspberry Pi Zero
January 06 2016
 
Banana Pi M2
January 10 2016
 
ODROID C1 Plus
January 05 2016
 
Orange Pi PC
January 07 2016
 
Orange Pi Plus
January 07 2016
 
Jetson TK1
January 08 2016
 
Jetson TX1
January 08 2016
 
ARMv7 rev 5
December 13 2016
 
Plus Orange Pi Zero
December 15 2016
 
Orange Pi Zero
December 15 2016
 
MickMake Orange Pi Zero 512MB
December 15 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1
March 04 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1
January 06 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1
January 06 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1
January 10 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1
January 05 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1
January 07 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1
January 07 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1
January 08 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1
January 08 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero
December 08 2016
 
Orange Pi Zero 2
December 08 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2
March 04 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2
January 06 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2
January 06 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2
January 10 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2
January 05 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2
January 07 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2
January 07 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2
January 08 2016
 
Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2
January 08 2016
 
Adding in Orange Pi Zero
December 09 2016
 
Invert Behavior (Only Show Selected Data)
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ODROID C1 Plus

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1

Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Raspberry Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Raspberry Pi 2

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Orange Pi Plus

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Orange Pi PC

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2

Changed Processor to ARMv7 rev 5 @ 1.20GHz (4 Cores).

Jetson TX1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Jetson TK1

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Banana Pi M2

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1

Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Raspberry Pi 3

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Orange Pi Zero 2

Adding in Orange Pi Zero

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 241MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.4.113-sun8i (armv7l), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 720x1152

ARMv7 rev 5

Changed Disk to 32GB 00000.

MickMake Orange Pi Zero 512MB

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 494MB, Disk: 250GB VER + 8GB 00000, Graphics: Intel HD 4000

OS: Debian 8.6, Kernel: 3.4.113-sun8i (armv7l), OpenGL: 1.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 3360x1027

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Plus Orange Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Orange Pi Zero

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 241MB, Disk: 32GB 00000

OS: Ubuntu 16.04, Kernel: 3.4.113-sun8i (armv7l), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 720x1152

Raspberry Pi 3 Linux Benchmark Comparison, MickMake Orange Pi Zero 512MBProcessorMotherboardMemoryDiskGraphicsMonitorNetworkOSKernelDesktopDisplay ServerOpenGLCompilerFile-SystemScreen ResolutionDisplay DriverODROID C1 PlusRaspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2Raspberry Pi ZeroRaspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2Raspberry Pi 2Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2Orange Pi PlusRaspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2Orange Pi PCRaspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2Jetson TX1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2Jetson TK1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2Banana Pi M2Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2Raspberry Pi 3Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi ZeroOrange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBPlus Orange Pi ZeroOrange Pi ZeroARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC836MB8GB SDUbuntu 14.043.10.80-135 (armv7l)LXDE 0.6.1X Server 1.15.12.1 Mesa 10.1.3GCC 4.9.3ext41920x1080ARMv6-compatible rev 7 @ 1.00GHz (1 Core)BCM2708 Raspberry Pi ? Rev 1.2434MB8GB SL08GRaspbian 8.04.1.13+ (armv6l)LXDE 0.7.2X Server 1.16.4GCC 4.9.21776x952ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2709 Raspberry Pi 2 Model B Rev 1.1925MB8GB SD4.1.13-v7+ (armv7l)1824x984ARMv7 rev 5 @ 1.20GHz (3 Cores)sun8i1024MB16GB SL16GRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720ARMv7 rev 5 @ 1.20GHz (4 Cores)Cortex A57 rev 1 @ 1.91GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1 (nvgpu)/Acer G237HLUbuntu 14.043.10.67-g3a5c467 (aarch64)Unity 7.2.2X Server 1.15.1NVIDIA 23.1.14.3.0GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.01920x1080ARMv7 rev 3 @ 2.32GHz (4 Cores)jetson-tk12048MB16GB SEM16GGK20A/NullRM/AXIRealtek RTL8111/8168/84113.10.40-gdacac96 (armv7l)NVIDIA 21.4GCC 4.8.4 + CUDA 6.5ARMv7 rev 3 @ 1.01GHz (4 Cores)Allwinner sun6i (A31) Family Banana Pi BPI-M21024MB8GB SDDebian 8.14.2.0-BPI-kernel+ (armv7l)GCC 4.9.2ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2709 Raspberry Pi 3 Model B Rev 1.2925MB16GB SD16GLLVMpipeRaspbian 8.04.1.18-v7+ (armv7l)LXDE 0.7.2X Server 1.17.23.0 Mesa 11.1.0 Gallium 0.41824x984ARMv7 rev 5 @ 1.20GHz (4 Cores)sun8i241MBUbuntu 16.043.4.113-sun8i (armv7l)GCC 5.4.0 20160609720x115232GB 00000494MB250GB VER + 8GB 00000Intel HD 4000Debian 8.61.4GCC 4.9.23360x1027241MB32GB 00000Ubuntu 16.04GCC 5.4.0 20160609720x1152OpenBenchmarking.orgCompiler Details- ODROID C1 Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi Plus: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi PC: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Jetson TX1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Jetson TK1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Orange Pi Zero 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Adding in Orange Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ARMv7 rev 5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- MickMake Orange Pi Zero 512MB: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Plus Orange Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Orange Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -vProcessor Details- ODROID C1 Plus: Scaling Governor: meson_cpufreq performance- Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1: Scaling Governor: meson_cpufreq performance- Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2: Scaling Governor: meson_cpufreq performance- Raspberry Pi Zero: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2: Scaling Governor: BCM2835 Freq ondemand- Orange Pi Plus: Scaling Governor: cpufreq-sunxi ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1: Scaling Governor: cpufreq-sunxi ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2: Scaling Governor: cpufreq-sunxi ondemand- Orange Pi PC: Scaling Governor: cpufreq-sunxi ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1: Scaling Governor: cpufreq-sunxi ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2: Scaling Governor: cpufreq-sunxi ondemand- Jetson TX1: Scaling Governor: tegra interactive- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1: Scaling Governor: tegra interactive- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2: Scaling Governor: tegra interactive- Jetson TK1: Scaling Governor: tegra interactive- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1: Scaling Governor: tegra interactive- Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2: Scaling Governor: tegra interactive- Banana Pi M2: Scaling Governor: cpufreq-dt ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1: Scaling Governor: cpufreq-dt ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2: Scaling Governor: cpufreq-dt ondemand- Raspberry Pi 3: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero: Scaling Governor: cpufreq-sunxi interactive- Orange Pi Zero 2: Scaling Governor: cpufreq-sunxi interactive- Adding in Orange Pi Zero: Scaling Governor: cpufreq-sunxi interactive- ARMv7 rev 5: Scaling Governor: cpufreq-sunxi interactive- MickMake Orange Pi Zero 512MB: Scaling Governor: cpufreq-sunxi interactive- Plus Orange Pi Zero: Scaling Governor: cpufreq-sunxi interactive- Orange Pi Zero: Scaling Governor: cpufreq-sunxi interactive

Raspberry Pi 3 Linux Benchmark Comparison, MickMake Orange Pi Zero 512MBc-ray: Total Timemafft: Multiple Sequence Alignmentopenssl: RSA 4096-bit Performancesmallpt: Global Illumination Renderer; 100 Samplesjohn-the-ripper: Blowfishhimeno: Poisson Pressure Solverencode-flac: WAV To FLACpgbench: Buffer Test - Heavy Contention - Read Writepgbench: Mostly RAM - Heavy Contention - Read Writepgbench: Buffer Test - Heavy Contention - Read Onlypgbench: Mostly RAM - Heavy Contention - Read Onlypgbench: Buffer Test - Single Thread - Read Writepgbench: On-Disk - Heavy Contention - Read Writepgbench: Mostly RAM - Single Thread - Read Writepgbench: Buffer Test - Single Thread - Read Onlypgbench: On-Disk - Heavy Contention - Read Onlypgbench: Buffer Test - Normal Load - Read Writepgbench: Mostly RAM - Normal Load - Read Writepgbench: Buffer Test - Normal Load - Read Onlypgbench: On-Disk - Single Thread - Read Writepgbench: Mostly RAM - Normal Load - Read Onlypgbench: On-Disk - Single Thread - Read Onlypgbench: On-Disk - Normal Load - Read Writepgbench: On-Disk - Normal Load - Read Onlymencoder: AVI To LAVCencode-wavpack: WAV To WavPackencode-ogg: WAV To Oggcrafty: Elapsed Timebuild-php: Time To Compilebuild-apache: Time To Compilecompress-7zip: Compress Speed Testhimeno: Poisson Pressure Solvergraphics-magick: Local Adaptive Thresholdinggraphics-magick: HWB Color Spacegraphics-magick: Resizinggraphics-magick: Sharpengraphics-magick: Blurttsiod-renderer: Phong Rendering With Soft-Shadow Mappingjohn-the-ripper: MD5john-the-ripper: Traditional DEStscp: AI Chess Performancegcrypt: CAMELLIA256-ECB Cipherhmmer: Pfam Database Searchnpb: SP.Anpb: LU.Anpb: EP.Cnpb: BT.Apgbench: Mostly RAM - Single Thread - Read Onlycompress-pbzip2: 256MB File CompressionODROID C1 PlusRaspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2Raspberry Pi ZeroRaspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2Raspberry Pi 2Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2Orange Pi PlusRaspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2Orange Pi PCRaspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2Jetson TX1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2Jetson TK1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2Banana Pi M2Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2Raspberry Pi 3Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi ZeroOrange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBPlus Orange Pi ZeroOrange Pi Zero323.0851.5418.80159049481.97200.503037.57501.112.601202988.7310.00606.76505.4475.4611.93217538733.29314.581424.86103.057.83304232264.38257.87951.1077.1611.93198231559.24261.8385.3016.5624.67613156383.4047.6495.0115.1054.402888422141.3050.29436.1871.5813.40198442760.08269.63247.3753.6220.25138862962.54228.37470.6680.77207240059.94235.95477.0783.62217640359.45239.46484.3382.24215740859.38238.78369.9370.4015.731690497233.42204.86241.753614.52432.81232.8668.77150.222423.3476.66308.76314.593832.6350.85631.9173.9972.2878.19352.2281.2873.580.13520.92489.65110461.2710281915911.31788242323333313698912973184.6760.89277.4815.78160.52590.2137.30510.1588.08226740754.06256.19OpenBenchmarking.org

John The Ripper

OpenBenchmarking.orgReal C/S Per Dollar, More Is BetterJohn The Ripper 1.8.0Performance / Cost - Test: BlowfishODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Raspberry Pi 34812162010.9817.7510.467.1612.602.612.2017.971. ODROID C1 Plus: $45 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. Raspberry Pi 2: $37 reported cost.4. Orange Pi Plus: $45 reported cost.5. Orange Pi PC: $25 reported cost.6. Jetson TX1: $599 reported cost.7. Jetson TK1: $192 reported cost.8. Raspberry Pi 3: $35 reported cost.

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBOrange Pi Zero7001400210028003500SE +/- 1.77, N = 3SE +/- 15.62, N = 3SE +/- 0.74, N = 3SE +/- 16.48, N = 3SE +/- 5.09, N = 3SE +/- 1.22, N = 6SE +/- 5.21, N = 6SE +/- 0.38, N = 3SE +/- 0.58, N = 3SE +/- 1.55, N = 3SE +/- 1.27, N = 3SE +/- 0.24, N = 3SE +/- 0.31, N = 3SE +/- 9.04, N = 3323.083037.57505.441424.86951.1085.3095.01436.18247.37470.66477.07484.33369.93510.151. (CC) gcc options: -lm -lpthread -O3

Timed MAFFT Alignment

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 6.864Multiple Sequence AlignmentODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBOrange Pi Zero110220330440550SE +/- 0.25, N = 3SE +/- 5.19, N = 3SE +/- 1.02, N = 3SE +/- 2.30, N = 6SE +/- 0.42, N = 3SE +/- 0.07, N = 3SE +/- 0.34, N = 6SE +/- 2.05, N = 6SE +/- 1.03, N = 3SE +/- 0.39, N = 3SE +/- 0.68, N = 3SE +/- 2.07, N = 6SE +/- 0.19, N = 3SE +/- 1.32, N = 351.54501.1175.46103.0577.1616.5615.1071.5853.6280.7783.6282.2470.4088.081. (CC) gcc options: -O3 -lm -lpthread

OpenSSL

OpenSSL is an open-source toolkit that implements SSL (Secure Sockets Layer) and TLS (Transport Layer Security) protocols. This test measures the RSA 4096-bit performance of OpenSSL. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.0.1gRSA 4096-bit PerformanceODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3MickMake Orange Pi Zero 512MB1224364860SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.06, N = 3SE +/- 0.00, N = 3SE +/- 0.71, N = 6SE +/- 0.03, N = 318.802.6011.937.8311.9324.6754.4013.4020.2515.73-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-fomit-frame-pointer-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a1. (CC) gcc options: -O3 -lssl -lcrypto -ldl

Smallpt

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 100 SamplesODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBOrange Pi Zero3K6K9K12K15KSE +/- 1.53, N = 3SE +/- 32.94, N = 3SE +/- 5.90, N = 3SE +/- 2.19, N = 3SE +/- 0.67, N = 3SE +/- 0.33, N = 3SE +/- 1.53, N = 3SE +/- 0.88, N = 3SE +/- 2.96, N = 3SE +/- 0.88, N = 3SE +/- 15.92, N = 3SE +/- 1.67, N = 3SE +/- 1.00, N = 3SE +/- 2.52, N = 3159012029217530421982613288819841388207221762157169022671. (CXX) g++ options: -fopenmp

John The Ripper

This is a benchmark of John The Ripper, which is a password cracker. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: BlowfishODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBOrange Pi Zero30060090012001500SE +/- 0.33, N = 3SE +/- 1.73, N = 3SE +/- 0.67, N = 3SE +/- 0.00, N = 3SE +/- 14.50, N = 6SE +/- 1.73, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 9.50, N = 3SE +/- 5.93, N = 6SE +/- 7.27, N = 6SE +/- 8.47, N = 6SE +/- 3.71, N = 3SE +/- 7.36, N = 3494.0088.73387.00322.00315.001563.00422.00427.00629.00400.00403.00408.00497.00407.001. (CC) gcc options: -fopenmp

Himeno Benchmark

OpenBenchmarking.orgMFLOPS Per Dollar, More Is BetterHimeno Benchmark 3.0Performance / Cost - Poisson Pressure SolverODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Raspberry Pi 30.53331.06661.59992.13322.66651.822.000.901.432.370.140.741.791. ODROID C1 Plus: $45 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. Raspberry Pi 2: $37 reported cost.4. Orange Pi Plus: $45 reported cost.5. Orange Pi PC: $25 reported cost.6. Jetson TX1: $599 reported cost.7. Jetson TK1: $192 reported cost.8. Raspberry Pi 3: $35 reported cost.

OpenSSL

OpenBenchmarking.orgSigns Per Second Per Dollar, More Is BetterOpenSSL 1.0.1gPerformance / Cost - RSA 4096-bit PerformanceODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Raspberry Pi 30.13050.2610.39150.5220.65250.420.520.320.170.480.040.280.581. ODROID C1 Plus: $45 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. Raspberry Pi 2: $37 reported cost.4. Orange Pi Plus: $45 reported cost.5. Orange Pi PC: $25 reported cost.6. Jetson TX1: $599 reported cost.7. Jetson TK1: $192 reported cost.8. Raspberry Pi 3: $35 reported cost.

Himeno Benchmark

The Himeno benchmark is a linear solver of pressure Poisson using a point-Jacobi method. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5Orange Pi Zero306090120150SE +/- 1.42, N = 3SE +/- 0.07, N = 3SE +/- 0.47, N = 3SE +/- 0.06, N = 3SE +/- 0.40, N = 3SE +/- 0.85, N = 3SE +/- 1.48, N = 3SE +/- 0.79, N = 3SE +/- 1.51, N = 6SE +/- 0.08, N = 3SE +/- 0.51, N = 3SE +/- 0.35, N = 3SE +/- 0.33, N = 381.9710.0033.2964.3859.2483.40141.3060.0862.5459.9459.4559.3854.061. (CC) gcc options: -O3

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format three times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.1WAV To FLACODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Orange Pi Zero 2Adding in Orange Pi ZeroARMv7 rev 5MickMake Orange Pi Zero 512MBOrange Pi Zero130260390520650SE +/- 2.46, N = 5SE +/- 3.95, N = 5SE +/- 1.30, N = 5SE +/- 1.28, N = 5SE +/- 2.52, N = 5SE +/- 0.05, N = 5SE +/- 0.02, N = 5SE +/- 0.15, N = 5SE +/- 0.36, N = 5SE +/- 1.89, N = 5SE +/- 0.27, N = 5SE +/- 3.32, N = 5SE +/- 0.20, N = 5SE +/- 1.34, N = 5200.50606.76314.58257.87261.8347.6450.29269.63228.37235.95239.46238.78233.42256.19-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Raspberry Pi 32468104.078.083.582.925.070.791.036.781. ODROID C1 Plus: $45 reported cost. Average result: 183.06.2. Raspberry Pi Zero: $5 reported cost. Average result: 40.41.3. Raspberry Pi 2: $37 reported cost. Average result: 132.57.4. Orange Pi Plus: $45 reported cost. Average result: 131.24.5. Orange Pi PC: $25 reported cost. Average result: 126.84.6. Jetson TX1: $599 reported cost. Average result: 471.18.7. Jetson TK1: $192 reported cost. Average result: 196.81.8. Raspberry Pi 3: $35 reported cost. Average result: 237.26.

PostgreSQL pgbench

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Heavy Contention - Mode: Read WriteMickMake Orange Pi Zero 512MB4080120160200SE +/- 3.45, N = 4204.861. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Heavy Contention - Mode: Read WriteMickMake Orange Pi Zero 512MB50100150200250SE +/- 3.87, N = 3241.751. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Heavy Contention - Mode: Read OnlyMickMake Orange Pi Zero 512MB8001600240032004000SE +/- 8.18, N = 33614.521. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Heavy Contention - Mode: Read OnlyMickMake Orange Pi Zero 512MB90180270360450SE +/- 8.53, N = 3432.811. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Single Thread - Mode: Read WriteMickMake Orange Pi Zero 512MB50100150200250SE +/- 0.08, N = 3232.861. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Heavy Contention - Mode: Read WriteMickMake Orange Pi Zero 512MB1530456075SE +/- 0.21, N = 368.771. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Single Thread - Mode: Read WriteMickMake Orange Pi Zero 512MB306090120150SE +/- 2.21, N = 5150.221. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Single Thread - Mode: Read OnlyMickMake Orange Pi Zero 512MB5001000150020002500SE +/- 5.39, N = 32423.341. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Heavy Contention - Mode: Read OnlyMickMake Orange Pi Zero 512MB20406080100SE +/- 0.35, N = 376.661. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteMickMake Orange Pi Zero 512MB70140210280350SE +/- 0.09, N = 3308.761. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Normal Load - Mode: Read WriteMickMake Orange Pi Zero 512MB70140210280350SE +/- 4.56, N = 6314.591. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyMickMake Orange Pi Zero 512MB8001600240032004000SE +/- 11.05, N = 33832.631. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Single Thread - Mode: Read WriteMickMake Orange Pi Zero 512MB1122334455SE +/- 0.08, N = 350.851. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Normal Load - Mode: Read OnlyMickMake Orange Pi Zero 512MB140280420560700SE +/- 3.66, N = 3631.911. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Single Thread - Mode: Read OnlyMickMake Orange Pi Zero 512MB1632486480SE +/- 0.41, N = 373.991. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Normal Load - Mode: Read WriteMickMake Orange Pi Zero 512MB1632486480SE +/- 0.99, N = 572.281. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: On-Disk - Test: Normal Load - Mode: Read OnlyMickMake Orange Pi Zero 512MB20406080100SE +/- 0.69, N = 378.191. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Mencoder

OpenBenchmarking.orgSeconds, Fewer Is BetterMencoder 1.1AVI To LAVCMickMake Orange Pi Zero 512MB80160240320400SE +/- 0.48, N = 3352.221. (CC) gcc options: -lm -ffast-math -lpng -lz -ljpeg -lasound -ldl -lpthread -lfreetype -lpng12 -lfontconfig -lmad -rdynamic

WavPack Audio Encoding

OpenBenchmarking.orgSeconds, Fewer Is BetterWavPack Audio Encoding 4.41.0WAV To WavPackMickMake Orange Pi Zero 512MB20406080100SE +/- 0.06, N = 581.281. (CC) gcc options: -O2 -lm

Ogg Encoding

OpenBenchmarking.orgSeconds, Fewer Is BetterOgg Encoding 1.3.0WAV To OggMickMake Orange Pi Zero 512MB1632486480SE +/- 0.41, N = 573.581. (CC) gcc options: -O2 -ffast-math -fsigned-char -logg

Crafty

OpenBenchmarking.orgSeconds, Fewer Is BetterCrafty 23.4Elapsed TimeMickMake Orange Pi Zero 512MB0.02930.05860.08790.11720.1465SE +/- 0.00, N = 50.131. (CC) gcc options: -lstdc++ -lm

Timed PHP Compilation

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed PHP Compilation 5.2.9Time To CompileMickMake Orange Pi Zero 512MB110220330440550SE +/- 7.63, N = 3520.921. (CC) gcc options: -O2 -pedantic -ldl -lz -lm

Timed Apache Compilation

This test times how long it takes to build the Apache HTTP Server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed Apache Compilation 2.4.7Time To CompileMickMake Orange Pi Zero 512MB110220330440550SE +/- 0.43, N = 3489.65

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 9.20.1Compress Speed TestMickMake Orange Pi Zero 512MB2004006008001000SE +/- 5.78, N = 311041. (CXX) g++ options: -pipe -lpthread

Himeno Benchmark

The Himeno benchmark is a linear solver of pressure Poisson using a point-Jacobi method. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverMickMake Orange Pi Zero 512MB1428425670SE +/- 0.55, N = 361.271. (CC) gcc options: -O3

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests to stress the system's CPU. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.19Operation: Local Adaptive ThresholdingMickMake Orange Pi Zero 512MB3691215SE +/- 0.00, N = 3101. (CC) gcc options: -std=gnu99 -fopenmp -O2 -pthread -ljbig -lwebp -ljpeg -lXext -lSM -lICE -lX11 -llzma -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.19Operation: HWB Color SpaceMickMake Orange Pi Zero 512MB714212835SE +/- 0.00, N = 3281. (CC) gcc options: -std=gnu99 -fopenmp -O2 -pthread -ljbig -lwebp -ljpeg -lXext -lSM -lICE -lX11 -llzma -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.19Operation: ResizingMickMake Orange Pi Zero 512MB510152025SE +/- 0.00, N = 3191. (CC) gcc options: -std=gnu99 -fopenmp -O2 -pthread -ljbig -lwebp -ljpeg -lXext -lSM -lICE -lX11 -llzma -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.19Operation: SharpenMickMake Orange Pi Zero 512MB48121620SE +/- 0.25, N = 4151. (CC) gcc options: -std=gnu99 -fopenmp -O2 -pthread -ljbig -lwebp -ljpeg -lXext -lSM -lICE -lX11 -llzma -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.19Operation: BlurMickMake Orange Pi Zero 512MB3691215SE +/- 0.00, N = 391. (CC) gcc options: -std=gnu99 -fopenmp -O2 -pthread -ljbig -lwebp -ljpeg -lXext -lSM -lICE -lX11 -llzma -lz -lm -lgomp -lpthread

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3aPhong Rendering With Soft-Shadow MappingMickMake Orange Pi Zero 512MB3691215SE +/- 0.22, N = 611.311. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -lstdc++

John The Ripper

This is a benchmark of John The Ripper, which is a password cracker. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: MD5MickMake Orange Pi Zero 512MB2K4K6K8K10KSE +/- 31.59, N = 378821. (CC) gcc options: -fopenmp

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: Traditional DESMickMake Orange Pi Zero 512MB90M180M270M360M450MSE +/- 3477030.84, N = 34232333331. (CC) gcc options: -fopenmp

TSCP

This is a performance test of TSCP, Tom Kerrigan's Simple Chess Program, which has a built-in performance benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgNodes Per Second, More Is BetterTSCP 1.81AI Chess PerformanceMickMake Orange Pi Zero 512MB30K60K90K120K150KSE +/- 54.58, N = 51369891. (CC) gcc options: -O3 -march=native

Gcrypt Library

OpenBenchmarking.orgMicroseconds, Fewer Is BetterGcrypt Library 1.4.4CAMELLIA256-ECB CipherMickMake Orange Pi Zero 512MB3K6K9K12K15KSE +/- 14.53, N = 3129731. (CC) gcc options: -O2 -fvisibility=hidden

Timed HMMer Search

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed HMMer Search 2.3.2Pfam Database SearchMickMake Orange Pi Zero 512MB4080120160200SE +/- 0.10, N = 3184.671. (CC) gcc options: -O2 -pthread -lhmmer -lsquid -lm

NAS Parallel Benchmarks

OpenBenchmarking.orgTotal Mop/s, More Is BetterNAS Parallel Benchmarks 3.3Test / Class: SP.AMickMake Orange Pi Zero 512MB1428425670SE +/- 0.08, N = 360.891. (F9X) gfortran options: -O3 -march=native -pthread -lmpi_f77 -lmpi -ldl -lhwloc2. Open MPI 1.6.5

OpenBenchmarking.orgTotal Mop/s, More Is BetterNAS Parallel Benchmarks 3.3Test / Class: LU.AMickMake Orange Pi Zero 512MB60120180240300SE +/- 0.68, N = 3277.481. (F9X) gfortran options: -O3 -march=native -pthread -lmpi_f77 -lmpi -ldl -lhwloc2. Open MPI 1.6.5

OpenBenchmarking.orgTotal Mop/s, More Is BetterNAS Parallel Benchmarks 3.3Test / Class: EP.CMickMake Orange Pi Zero 512MB48121620SE +/- 0.02, N = 315.781. (F9X) gfortran options: -O3 -march=native -pthread -lmpi_f77 -lmpi -ldl -lhwloc2. Open MPI 1.6.5

OpenBenchmarking.orgTotal Mop/s, More Is BetterNAS Parallel Benchmarks 3.3Test / Class: BT.AMickMake Orange Pi Zero 512MB4080120160200SE +/- 0.19, N = 3160.521. (F9X) gfortran options: -O3 -march=native -pthread -lmpi_f77 -lmpi -ldl -lhwloc2. Open MPI 1.6.5

PostgreSQL pgbench

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 9.4.3Scaling: Mostly RAM - Test: Single Thread - Mode: Read OnlyMickMake Orange Pi Zero 512MB130260390520650SE +/- 18.14, N = 6590.211. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -pthread -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Parallel BZIP2 Compression

This test measures the time needed to compress a file (a .tar package of the Linux kernel source code) using BZIP2 compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterParallel BZIP2 Compression 1.1.12256MB File CompressionMickMake Orange Pi Zero 512MB918273645SE +/- 3.83, N = 637.301. (CXX) g++ options: -O2 -pthread -lbz2 -lpthread

ODROID C1 Plus

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Raspberry Pi 3 Linux Benchmark Comparison: ODROID C1 Plus #2

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Raspberry Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi Zero #2

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Raspberry Pi 2

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 2 #2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Orange Pi Plus

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Plus #2

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

Orange Pi PC

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi PC #2

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Jetson TX1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TX1 #2

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Jetson TK1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Raspberry Pi 3 Linux Benchmark Comparison: Jetson TK1 #2

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Banana Pi M2

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Banana Pi M2 #2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

Raspberry Pi 3

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #1

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Raspberry Pi 3 #2

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Raspberry Pi 3 Linux Benchmark Comparison: Orange Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 8 December 2016 21:52 by user root.

Orange Pi Zero 2

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 8 December 2016 22:03 by user root.

Adding in Orange Pi Zero

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 241MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.4.113-sun8i (armv7l), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 720x1152

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 9 December 2016 10:09 by user root.

ARMv7 rev 5

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 241MB, Disk: 32GB 00000

OS: Ubuntu 16.04, Kernel: 3.4.113-sun8i (armv7l), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 720x1152

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 13 December 2016 11:42 by user root.

MickMake Orange Pi Zero 512MB

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 494MB, Disk: 250GB VER + 8GB 00000, Graphics: Intel HD 4000

OS: Debian 8.6, Kernel: 3.4.113-sun8i (armv7l), OpenGL: 1.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 3360x1027

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 15 December 2016 07:33 by user mickmake.

Plus Orange Pi Zero

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 15 December 2016 10:15 by user root.

Orange Pi Zero

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 241MB, Disk: 32GB 00000

OS: Ubuntu 16.04, Kernel: 3.4.113-sun8i (armv7l), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 720x1152

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 15 December 2016 10:16 by user root.