Raspberry Pi 3 Linux Benchmark Comparison

No enclosure, lying flat on the table, 23°C ambient temperature, only cheap heatsink

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1603114-GA-1603116GA70
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts

Limit displaying results to tests within:

Bioinformatics 2 Tests
C/C++ Compiler Tests 6 Tests
CPU Massive 6 Tests
Creator Workloads 3 Tests
Cryptography 2 Tests
HPC - High Performance Computing 2 Tests
Multi-Core 3 Tests
Renderers 2 Tests
Scientific Computing 2 Tests
Server CPU Tests 4 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
View Logs
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 3
March 04 2016
 
Raspberry Pi 2
January 06 2016
 
Raspberry Pi Zero
January 06 2016
 
Banana Pi M2
January 10 2016
 
ODROID C1 Plus
January 05 2016
 
Orange Pi PC
January 07 2016
 
Orange Pi Plus
January 07 2016
 
Jetson TK1
January 08 2016
 
Jetson TX1
January 08 2016
 
Pine64+
March 06 2016
 
Pine64+ take 2
March 06 2016
 
Pine64+ take 3
March 06 2016
 
Pine64+ take4
March 06 2016
 
Pine64+ ARMv8
March 08 2016
 
Orange Pi PC Armbian
March 08 2016
 
Pine64+ ARMv8 -O3
March 08 2016
 
Pine64+ in enclosure
March 10 2016
 
Pine64+ enclosure+heatsink
March 10 2016
 
Pine64+ encl/heatsink/cpufreq
March 10 2016
 
Pine64+ encl/heatsink/trip points
March 11 2016
 
Pine+64 only fan
March 11 2016
 
Pine+64 only heatsink
March 11 2016
 
Invert Hiding All Results Option
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Orange Pi PC

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Orange Pi Plus

Changed Processor to ARMv7 rev 5 @ 1.20GHz (3 Cores).

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Pine64+

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Desktop: Xfce 4.12, Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Pine64+ take 2

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Pine64+ take 3

Pine64+ take4

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1440x878

Pine64+ ARMv8

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Orange Pi PC Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Pine64+ ARMv8 -O3

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Pine64+ in enclosure

Changed Processor to AArch64 rev 4 @ 1.10GHz (4 Cores).

Processor Change: Scaling Governor: cpufreq-sunxi interactive

Pine64+ enclosure+heatsink

Pine64+ encl/heatsink/cpufreq

Pine64+ encl/heatsink/trip points

Pine+64 only fan

Pine+64 only heatsink

Changed Processor to AArch64 rev 4 @ 1.15GHz (4 Cores).

Raspberry Pi 3 Linux Benchmark ComparisonProcessorMotherboardMemoryDiskGraphicsNetworkMonitorOSKernelDesktopDisplay ServerOpenGLCompilerFile-SystemScreen ResolutionDisplay DriverRaspberry Pi 3Raspberry Pi 2Raspberry Pi ZeroBanana Pi M2ODROID C1 PlusOrange Pi PCOrange Pi PlusJetson TK1Jetson TX1Pine64+Pine64+ take 2Pine64+ take 3Pine64+ take4Pine64+ ARMv8Orange Pi PC ArmbianPine64+ ARMv8 -O3Pine64+ in enclosurePine64+ enclosure+heatsinkPine64+ encl/heatsink/cpufreqPine64+ encl/heatsink/trip pointsPine+64 only fanPine+64 only heatsinkARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2709 Raspberry Pi 3 Model B Rev 1.2925MB16GB SD16GLLVMpipeRaspbian 8.04.1.18-v7+ (armv7l)LXDE 0.7.2X Server 1.17.23.0 Mesa 11.1.0 Gallium 0.4GCC 4.9.2ext41824x984ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2709 Raspberry Pi 2 Model B Rev 1.18GB SD4.1.13-v7+ (armv7l)X Server 1.16.4ARMv6-compatible rev 7 @ 1.00GHz (1 Core)BCM2708 Raspberry Pi ? Rev 1.2434MB8GB SL08G4.1.13+ (armv6l)1776x952ARMv7 rev 3 @ 1.01GHz (4 Cores)Allwinner sun6i (A31) Family Banana Pi BPI-M21024MB8GB SDDebian 8.14.2.0-BPI-kernel+ (armv7l)1920x1080ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC836MBUbuntu 14.043.10.80-135 (armv7l)LXDE 0.6.1X Server 1.15.12.1 Mesa 10.1.3GCC 4.9.3ARMv7 rev 5 @ 1.20GHz (4 Cores)sun8i1024MB16GB SL16GRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720ARMv7 rev 5 @ 1.20GHz (3 Cores)ARMv7 rev 3 @ 2.32GHz (4 Cores)jetson-tk12048MB16GB SEM16GGK20A/NullRM/AXIRealtek RTL8111/8168/8411Ubuntu 14.043.10.40-gdacac96 (armv7l)Unity 7.2.2X Server 1.15.1NVIDIA 21.44.3.0GCC 4.8.4 + CUDA 6.51920x1080Cortex A57 rev 1 @ 1.91GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1 (nvgpu)/Acer G237HL3.10.67-g3a5c467 (aarch64)NVIDIA 23.1.1GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SE32GNVIDIA GeForce GT 650MUbuntu 16.043.10.65+ (aarch64)Xfce 4.12X Server 1.17.3modesetting 1.17.31.4GCC 5.3.1 201602252560x15781440x878AArch64 rev 4 @ 1.34GHz (4 Cores)16GB SD16G3.10.65-2-pine64-longsleep (aarch64)1920x2160ARMv7 rev 5 @ 1.30GHz (4 Cores)sun8i8GB SU08GDebian 8.33.4.110-sun8i (armv7l)GCC 4.9.2AArch64 rev 4 @ 1.34GHz (4 Cores)sun50iw1p116GB SD16GUbuntu 16.043.10.65-2-pine64-longsleep (aarch64)GCC 5.3.1 20160225AArch64 rev 4 @ 1.10GHz (4 Cores)AArch64 rev 4 @ 1.15GHz (4 Cores)OpenBenchmarking.orgCompiler Details- Raspberry Pi 3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Banana Pi M2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID C1 Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Orange Pi PC: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi Plus: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Jetson TK1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Jetson TX1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Pine64+: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take 2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take 3: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take4: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ ARMv8: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Orange Pi PC Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Pine64+ ARMv8 -O3: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ in enclosure: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ enclosure+heatsink: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ encl/heatsink/cpufreq: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ encl/heatsink/trip points: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine+64 only fan: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine+64 only heatsink: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -vProcessor Details- Raspberry Pi 3: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi Zero: Scaling Governor: BCM2835 Freq ondemand- Banana Pi M2: Scaling Governor: cpufreq-dt ondemand- ODROID C1 Plus: Scaling Governor: meson_cpufreq performance- Orange Pi PC: Scaling Governor: cpufreq-sunxi ondemand- Orange Pi Plus: Scaling Governor: cpufreq-sunxi ondemand- Jetson TK1: Scaling Governor: tegra interactive- Jetson TX1: Scaling Governor: tegra interactive- Pine64+: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take 2: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take 3: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take4: Scaling Governor: cpufreq-sunxi interactive- Pine64+ ARMv8: Scaling Governor: cpufreq-sunxi performance- Orange Pi PC Armbian: Scaling Governor: cpufreq-sunxi performance- Pine64+ ARMv8 -O3: Scaling Governor: cpufreq-sunxi performance- Pine64+ in enclosure: Scaling Governor: cpufreq-sunxi interactive- Pine64+ enclosure+heatsink: Scaling Governor: cpufreq-sunxi interactive- Pine64+ encl/heatsink/cpufreq: Scaling Governor: cpufreq-sunxi interactive- Pine64+ encl/heatsink/trip points: Scaling Governor: cpufreq-sunxi interactive- Pine+64 only fan: Scaling Governor: cpufreq-sunxi interactive- Pine+64 only heatsink: Scaling Governor: cpufreq-sunxi interactive

Raspberry Pi 3 Linux Benchmark Comparisonencode-flac: WAV To FLACopenssl: RSA 4096-bit Performancehimeno: Poisson Pressure Solvermafft: Multiple Sequence Alignmentsmallpt: Global Illumination Renderer; 100 Samplesc-ray: Total Timejohn-the-ripper: BlowfishRaspberry Pi 3Raspberry Pi 2Raspberry Pi ZeroBanana Pi M2ODROID C1 PlusOrange Pi PCOrange Pi PlusJetson TK1Jetson TX1Pine64+Pine64+ take 2Pine64+ take 3Pine64+ take4Pine64+ ARMv8Orange Pi PC ArmbianPine64+ ARMv8 -O3Pine64+ in enclosurePine64+ enclosure+heatsinkPine64+ encl/heatsink/cpufreqPine64+ encl/heatsink/trip pointsPine+64 only fanPine+64 only heatsink228.3720.2562.5453.621388247.37629314.5811.9333.2975.462175505.44387606.762.6010.00501.11120293037.5788.73269.6313.4060.0871.581984436.18427200.5018.8081.9751.541590323.08494261.8311.9359.2477.161982951.10315257.877.8364.38103.0530421424.8632250.2954.40141.3015.10288895.0142247.6424.6783.4016.5661385.301563290.58497215.9213.8358.9457.611489289.96513215.2413.9762.6257.911470281.87547177.5818.4772.0042.031045210.23763223.1117.1766.2963.581550346.72542177.3518.5066.3743.74215208.71866234.339.4060.1680.651920354.50418217.0212.7062.4260.821574303.39532216.5013.5064.4462.181488283.69581208.5913.7061.0459.12299287.04661206.9514.4560.1152.82277265.88685206.9714.5762.2053.79280269.98712OpenBenchmarking.org

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarRaspberry Pi ZeroRaspberry Pi 3Orange Pi PCODROID C1 PlusRaspberry Pi 2Orange Pi PlusJetson TK1Jetson TX12468108.086.785.074.073.582.921.030.791. Raspberry Pi Zero: $5 reported cost. Average result: 40.41.2. Raspberry Pi 3: $35 reported cost. Average result: 237.26.3. Orange Pi PC: $25 reported cost. Average result: 126.84.4. ODROID C1 Plus: $45 reported cost. Average result: 183.06.5. Raspberry Pi 2: $37 reported cost. Average result: 132.57.6. Orange Pi Plus: $45 reported cost. Average result: 131.24.7. Jetson TK1: $192 reported cost. Average result: 196.81.8. Jetson TX1: $599 reported cost. Average result: 471.18.

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format three times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.1WAV To FLACJetson TX1Jetson TK1Pine64+ ARMv8 -O3Pine64+ ARMv8ODROID C1 PlusPine+64 only fanPine+64 only heatsinkPine64+ encl/heatsink/trip pointsPine64+ take4Pine64+ take 2Pine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkOrange Pi PC ArmbianRaspberry Pi 3Pine64+ in enclosureOrange Pi PlusOrange Pi PCBanana Pi M2Raspberry Pi 2Raspberry Pi Zero130260390520650SE +/- 0.05, N = 5SE +/- 0.02, N = 5SE +/- 0.16, N = 5SE +/- 0.19, N = 5SE +/- 2.46, N = 5SE +/- 0.11, N = 5SE +/- 0.12, N = 5SE +/- 1.24, N = 5SE +/- 0.33, N = 5SE +/- 0.25, N = 5SE +/- 0.65, N = 5SE +/- 1.09, N = 5SE +/- 0.63, N = 5SE +/- 0.36, N = 5SE +/- 0.68, N = 5SE +/- 1.28, N = 5SE +/- 2.52, N = 5SE +/- 0.15, N = 5SE +/- 1.30, N = 5SE +/- 3.95, N = 547.6450.29177.35177.58200.50206.95206.97208.59215.24215.92216.50217.02223.11228.37234.33257.87261.83269.63314.58606.761. (CXX) g++ options: -fvisibility=hidden -lm

OpenSSL

OpenBenchmarking.orgSigns Per Second Per Dollar, More Is BetterOpenSSL 1.0.1gPerformance / Cost - RSA 4096-bit PerformanceRaspberry Pi 3Raspberry Pi ZeroOrange Pi PCODROID C1 PlusRaspberry Pi 2Jetson TK1Orange Pi PlusJetson TX10.13050.2610.39150.5220.65250.580.520.480.420.320.280.170.041. Raspberry Pi 3: $35 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. Orange Pi PC: $25 reported cost.4. ODROID C1 Plus: $45 reported cost.5. Raspberry Pi 2: $37 reported cost.6. Jetson TK1: $192 reported cost.7. Orange Pi Plus: $45 reported cost.8. Jetson TX1: $599 reported cost.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.0.1gRSA 4096-bit PerformanceJetson TK1Jetson TX1Raspberry Pi 3ODROID C1 PlusPine64+ ARMv8 -O3Pine64+ ARMv8Orange Pi PC ArmbianPine+64 only heatsinkPine+64 only fanPine64+ take4Pine64+ take 2Pine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqBanana Pi M2Pine64+ enclosure+heatsinkOrange Pi PCRaspberry Pi 2Pine64+ in enclosureOrange Pi PlusRaspberry Pi Zero1224364860SE +/- 0.06, N = 3SE +/- 0.03, N = 3SE +/- 0.71, N = 6SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.23, N = 3SE +/- 0.22, N = 6SE +/- 0.12, N = 3SE +/- 0.18, N = 3SE +/- 0.25, N = 3SE +/- 0.17, N = 3SE +/- 0.00, N = 3SE +/- 0.23, N = 6SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.50, N = 6SE +/- 0.03, N = 3SE +/- 0.00, N = 354.4024.6720.2518.8018.5018.4717.1714.5714.4513.9713.8313.7013.5013.4012.7011.9311.939.407.832.601. (CC) gcc options: -O3 -lssl -lcrypto -ldl

Himeno Benchmark

OpenBenchmarking.orgMFLOPS Per Dollar, More Is BetterHimeno Benchmark 3.0Performance / Cost - Poisson Pressure SolverOrange Pi PCRaspberry Pi ZeroODROID C1 PlusRaspberry Pi 3Orange Pi PlusRaspberry Pi 2Jetson TK1Jetson TX10.53331.06661.59992.13322.66652.372.001.821.791.430.900.740.141. Orange Pi PC: $25 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. ODROID C1 Plus: $45 reported cost.4. Raspberry Pi 3: $35 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Jetson TK1: $192 reported cost.8. Jetson TX1: $599 reported cost.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverJetson TK1Jetson TX1ODROID C1 PlusPine64+ ARMv8Pine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ encl/heatsink/cpufreqOrange Pi PlusPine64+ take4Raspberry Pi 3Pine64+ enclosure+heatsinkPine+64 only heatsinkPine64+ encl/heatsink/trip pointsPine64+ in enclosurePine+64 only fanBanana Pi M2Orange Pi PCPine64+ take 2Raspberry Pi 2Raspberry Pi Zero306090120150SE +/- 1.48, N = 3SE +/- 0.85, N = 3SE +/- 1.42, N = 3SE +/- 1.45, N = 3SE +/- 0.78, N = 3SE +/- 0.47, N = 3SE +/- 0.30, N = 3SE +/- 0.06, N = 3SE +/- 0.86, N = 3SE +/- 1.51, N = 6SE +/- 0.33, N = 3SE +/- 0.13, N = 3SE +/- 0.90, N = 5SE +/- 0.25, N = 3SE +/- 0.60, N = 3SE +/- 0.79, N = 3SE +/- 0.40, N = 3SE +/- 1.18, N = 3SE +/- 0.47, N = 3SE +/- 0.07, N = 3141.3083.4081.9772.0066.3766.2964.4464.3862.6262.5462.4262.2061.0460.1660.1160.0859.2458.9433.2910.001. (CC) gcc options: -O3

Timed MAFFT Alignment

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 6.864Multiple Sequence AlignmentJetson TK1Jetson TX1Pine64+ ARMv8Pine64+ ARMv8 -O3ODROID C1 PlusPine+64 only fanRaspberry Pi 3Pine+64 only heatsinkPine64+ take 2Pine64+ take4Pine64+ encl/heatsink/trip pointsPine64+ enclosure+heatsinkPine64+ encl/heatsink/cpufreqOrange Pi PC ArmbianBanana Pi M2Raspberry Pi 2Orange Pi PCPine64+ in enclosureOrange Pi PlusRaspberry Pi Zero110220330440550SE +/- 0.34, N = 6SE +/- 0.07, N = 3SE +/- 0.64, N = 5SE +/- 0.79, N = 3SE +/- 0.25, N = 3SE +/- 0.47, N = 3SE +/- 1.03, N = 3SE +/- 1.35, N = 6SE +/- 0.51, N = 3SE +/- 1.53, N = 6SE +/- 1.31, N = 6SE +/- 1.79, N = 6SE +/- 0.63, N = 3SE +/- 0.08, N = 3SE +/- 2.05, N = 6SE +/- 1.02, N = 3SE +/- 0.42, N = 3SE +/- 1.33, N = 6SE +/- 2.30, N = 6SE +/- 5.19, N = 315.1016.5642.0343.7451.5452.8253.6253.7957.6157.9159.1260.8262.1863.5871.5875.4677.1680.65103.05501.111. (CC) gcc options: -O3 -lm -lpthread

Smallpt

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 100 SamplesPine64+ ARMv8 -O3Pine+64 only fanPine+64 only heatsinkPine64+ encl/heatsink/trip pointsJetson TX1Pine64+ ARMv8Raspberry Pi 3Pine64+ take4Pine64+ encl/heatsink/cpufreqPine64+ take 2Orange Pi PC ArmbianPine64+ enclosure+heatsinkODROID C1 PlusPine64+ in enclosureOrange Pi PCBanana Pi M2Raspberry Pi 2Jetson TK1Orange Pi PlusRaspberry Pi Zero3K6K9K12K15KSE +/- 1.00, N = 3SE +/- 4.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 2.96, N = 3SE +/- 4.37, N = 3SE +/- 6.89, N = 3SE +/- 6.77, N = 3SE +/- 0.33, N = 3SE +/- 5.51, N = 3SE +/- 1.53, N = 3SE +/- 33.22, N = 3SE +/- 0.67, N = 3SE +/- 0.88, N = 3SE +/- 5.90, N = 3SE +/- 1.53, N = 3SE +/- 2.19, N = 3SE +/- 32.94, N = 321527728029961310451388147014881489155015741590192019821984217528883042120291. (CXX) g++ options: -fopenmp

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeJetson TX1Jetson TK1Pine64+ ARMv8 -O3Pine64+ ARMv8Raspberry Pi 3Pine+64 only fanPine+64 only heatsinkPine64+ take4Pine64+ encl/heatsink/cpufreqPine64+ encl/heatsink/trip pointsPine64+ take 2Pine64+Pine64+ enclosure+heatsinkODROID C1 PlusOrange Pi PC ArmbianPine64+ in enclosureBanana Pi M2Raspberry Pi 2Orange Pi PCOrange Pi PlusRaspberry Pi Zero7001400210028003500SE +/- 1.22, N = 6SE +/- 5.21, N = 6SE +/- 0.18, N = 3SE +/- 1.60, N = 3SE +/- 0.58, N = 3SE +/- 0.41, N = 3SE +/- 1.51, N = 3SE +/- 1.06, N = 3SE +/- 2.61, N = 3SE +/- 1.69, N = 3SE +/- 0.45, N = 3SE +/- 1.51, N = 3SE +/- 2.49, N = 3SE +/- 1.77, N = 3SE +/- 2.00, N = 3SE +/- 0.50, N = 3SE +/- 0.38, N = 3SE +/- 0.74, N = 3SE +/- 5.09, N = 3SE +/- 16.48, N = 3SE +/- 15.62, N = 385.3095.01208.71210.23247.37265.88269.98281.87283.69287.04289.96290.58303.39323.08346.72354.50436.18505.44951.101424.863037.571. (CC) gcc options: -lm -lpthread -O3

John The Ripper

OpenBenchmarking.orgReal C/S Per Dollar, More Is BetterJohn The Ripper 1.8.0Performance / Cost - Test: BlowfishRaspberry Pi 3Raspberry Pi ZeroOrange Pi PCODROID C1 PlusRaspberry Pi 2Orange Pi PlusJetson TX1Jetson TK14812162017.9717.7512.6010.9810.467.162.612.201. Raspberry Pi 3: $35 reported cost.2. Raspberry Pi Zero: $5 reported cost.3. Orange Pi PC: $25 reported cost.4. ODROID C1 Plus: $45 reported cost.5. Raspberry Pi 2: $37 reported cost.6. Orange Pi Plus: $45 reported cost.7. Jetson TX1: $599 reported cost.8. Jetson TK1: $192 reported cost.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: BlowfishJetson TX1Pine64+ ARMv8 -O3Pine64+ ARMv8Pine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsRaspberry Pi 3Pine64+ encl/heatsink/cpufreqPine64+ take4Orange Pi PC ArmbianPine64+ enclosure+heatsinkPine64+ take 2Pine64+ODROID C1 PlusBanana Pi M2Jetson TK1Pine64+ in enclosureRaspberry Pi 2Orange Pi PlusOrange Pi PCRaspberry Pi Zero30060090012001500SE +/- 1.73, N = 3SE +/- 14.63, N = 6SE +/- 8.69, N = 3SE +/- 11.02, N = 3SE +/- 4.67, N = 3SE +/- 9.35, N = 3SE +/- 9.50, N = 3SE +/- 10.53, N = 3SE +/- 9.10, N = 4SE +/- 2.40, N = 3SE +/- 12.09, N = 6SE +/- 17.62, N = 6SE +/- 19.34, N = 6SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 8.73, N = 6SE +/- 0.67, N = 3SE +/- 0.00, N = 3SE +/- 14.50, N = 6SE +/- 1.73, N = 31563.00866.00763.00712.00685.00661.00629.00581.00547.00542.00532.00513.00497.00494.00427.00422.00418.00387.00322.00315.0088.731. (CC) gcc options: -fopenmp

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Orange Pi PC

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Orange Pi Plus

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Pine64+

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Desktop: Xfce 4.12, Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 11:28 by user ubuntu.

Pine64+ take 2

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 12:11 by user ubuntu.

Pine64+ take 3

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 18:19 by user ubuntu.

Pine64+ take4

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1440x878

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 18:24 by user ubuntu.

Pine64+ ARMv8

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 11:07 by user tk.

Orange Pi PC Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 14:12 by user tk.

Pine64+ ARMv8 -O3

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 17:04 by user tk.

Pine64+ in enclosure

Processor: AArch64 rev 4 @ 1.10GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 08:00 by user tk.

Pine64+ enclosure+heatsink

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 13:42 by user tk.

Pine64+ encl/heatsink/cpufreq

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 17:32 by user tk.

Pine64+ encl/heatsink/trip points

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 09:42 by user tk.

Pine+64 only fan

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 13:29 by user tk.

Pine+64 only heatsink

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 14:40 by user tk.