Raspberry Pi 3 Linux Benchmark Comparison

No enclosure, lying flat on the table, 23°C ambient temperature, only cheap heatsink

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1603114-GA-1603116GA70
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
View Logs
Performance Per
Dollar
Date
Run
  Test
  Duration
Raspberry Pi 3
March 04 2016
 
Raspberry Pi 2
January 06 2016
 
Raspberry Pi Zero
January 06 2016
 
Banana Pi M2
January 10 2016
 
ODROID C1 Plus
January 05 2016
 
Orange Pi PC
January 07 2016
 
Orange Pi Plus
January 07 2016
 
Jetson TK1
January 08 2016
 
Jetson TX1
January 08 2016
 
Pine64+
March 06 2016
 
Pine64+ take 2
March 06 2016
 
Pine64+ take 3
March 06 2016
 
Pine64+ take4
March 06 2016
 
Pine64+ ARMv8
March 08 2016
 
Orange Pi PC Armbian
March 08 2016
 
Pine64+ ARMv8 -O3
March 08 2016
 
Pine64+ in enclosure
March 10 2016
 
Pine64+ enclosure+heatsink
March 10 2016
 
Pine64+ encl/heatsink/cpufreq
March 10 2016
 
Pine64+ encl/heatsink/trip points
March 11 2016
 
Pine+64 only fan
March 11 2016
 
Pine+64 only heatsink
March 11 2016
 
Invert Behavior (Only Show Selected Data)
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Orange Pi Plus

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Orange Pi PC

Changed Processor to ARMv7 rev 5 @ 1.20GHz (4 Cores).

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Pine64+

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Desktop: Xfce 4.12, Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Pine64+ take 2

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Pine64+ take 3

Pine64+ take4

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1440x878

Pine64+ ARMv8

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Orange Pi PC Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Pine64+ ARMv8 -O3

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Pine64+ in enclosure

Changed Processor to AArch64 rev 4 @ 1.10GHz (4 Cores).

Processor Change: Scaling Governor: cpufreq-sunxi interactive

Pine64+ enclosure+heatsink

Pine64+ encl/heatsink/cpufreq

Pine64+ encl/heatsink/trip points

Pine+64 only fan

Pine+64 only heatsink

Changed Processor to AArch64 rev 4 @ 1.15GHz (4 Cores).

Raspberry Pi 3 Linux Benchmark ComparisonProcessorMotherboardMemoryDiskGraphicsMonitorNetworkOSKernelDesktopDisplay ServerOpenGLCompilerFile-SystemScreen ResolutionDisplay DriverODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Pine64+Pine64+ take 2Pine64+ take 3Pine64+ take4Pine64+ ARMv8Orange Pi PC ArmbianPine64+ ARMv8 -O3Pine64+ in enclosurePine64+ enclosure+heatsinkPine64+ encl/heatsink/cpufreqPine64+ encl/heatsink/trip pointsPine+64 only fanPine+64 only heatsinkARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC836MB8GB SDUbuntu 14.043.10.80-135 (armv7l)LXDE 0.6.1X Server 1.15.12.1 Mesa 10.1.3GCC 4.9.3ext41920x1080ARMv6-compatible rev 7 @ 1.00GHz (1 Core)BCM2708 Raspberry Pi ? Rev 1.2434MB8GB SL08GRaspbian 8.04.1.13+ (armv6l)LXDE 0.7.2X Server 1.16.4GCC 4.9.21776x952ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2709 Raspberry Pi 2 Model B Rev 1.1925MB8GB SD4.1.13-v7+ (armv7l)1824x984ARMv7 rev 5 @ 1.20GHz (3 Cores)sun8i1024MB16GB SL16GRaspbian GNU/Linux 73.4.39 (armv7l)LXDE 0.7.1X Server 1.12.4GCC 4.6.31280x720ARMv7 rev 5 @ 1.20GHz (4 Cores)Cortex A57 rev 1 @ 1.91GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA Tegra X1 (nvgpu)/Acer G237HLUbuntu 14.043.10.67-g3a5c467 (aarch64)Unity 7.2.2X Server 1.15.1NVIDIA 23.1.14.3.0GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.01920x1080ARMv7 rev 3 @ 2.32GHz (4 Cores)jetson-tk12048MB16GB SEM16GGK20A/NullRM/AXIRealtek RTL8111/8168/84113.10.40-gdacac96 (armv7l)NVIDIA 21.4GCC 4.8.4 + CUDA 6.5ARMv7 rev 3 @ 1.01GHz (4 Cores)Allwinner sun6i (A31) Family Banana Pi BPI-M21024MB8GB SDDebian 8.14.2.0-BPI-kernel+ (armv7l)GCC 4.9.2ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2709 Raspberry Pi 3 Model B Rev 1.2925MB16GB SD16GLLVMpipeRaspbian 8.04.1.18-v7+ (armv7l)LXDE 0.7.2X Server 1.17.23.0 Mesa 11.1.0 Gallium 0.41824x984AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SE32GNVIDIA GeForce GT 650MUbuntu 16.043.10.65+ (aarch64)Xfce 4.12X Server 1.17.3modesetting 1.17.31.4GCC 5.3.1 201602252560x15781440x878AArch64 rev 4 @ 1.34GHz (4 Cores)16GB SD16G3.10.65-2-pine64-longsleep (aarch64)1920x2160ARMv7 rev 5 @ 1.30GHz (4 Cores)sun8i8GB SU08GDebian 8.33.4.110-sun8i (armv7l)GCC 4.9.2AArch64 rev 4 @ 1.34GHz (4 Cores)sun50iw1p116GB SD16GUbuntu 16.043.10.65-2-pine64-longsleep (aarch64)GCC 5.3.1 20160225AArch64 rev 4 @ 1.10GHz (4 Cores)AArch64 rev 4 @ 1.15GHz (4 Cores)OpenBenchmarking.orgCompiler Details- ODROID C1 Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi Zero: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi Plus: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Orange Pi PC: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Jetson TX1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Jetson TK1: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Pine64+: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take 2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take 3: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ take4: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ ARMv8: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Orange Pi PC Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Pine64+ ARMv8 -O3: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ in enclosure: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ enclosure+heatsink: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ encl/heatsink/cpufreq: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine64+ encl/heatsink/trip points: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine+64 only fan: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Pine+64 only heatsink: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -vProcessor Details- ODROID C1 Plus: Scaling Governor: meson_cpufreq performance- Raspberry Pi Zero: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 2: Scaling Governor: BCM2835 Freq ondemand- Orange Pi Plus: Scaling Governor: cpufreq-sunxi ondemand- Orange Pi PC: Scaling Governor: cpufreq-sunxi ondemand- Jetson TX1: Scaling Governor: tegra interactive- Jetson TK1: Scaling Governor: tegra interactive- Banana Pi M2: Scaling Governor: cpufreq-dt ondemand- Raspberry Pi 3: Scaling Governor: BCM2835 Freq ondemand- Pine64+: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take 2: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take 3: Scaling Governor: cpufreq-sunxi interactive- Pine64+ take4: Scaling Governor: cpufreq-sunxi interactive- Pine64+ ARMv8: Scaling Governor: cpufreq-sunxi performance- Orange Pi PC Armbian: Scaling Governor: cpufreq-sunxi performance- Pine64+ ARMv8 -O3: Scaling Governor: cpufreq-sunxi performance- Pine64+ in enclosure: Scaling Governor: cpufreq-sunxi interactive- Pine64+ enclosure+heatsink: Scaling Governor: cpufreq-sunxi interactive- Pine64+ encl/heatsink/cpufreq: Scaling Governor: cpufreq-sunxi interactive- Pine64+ encl/heatsink/trip points: Scaling Governor: cpufreq-sunxi interactive- Pine+64 only fan: Scaling Governor: cpufreq-sunxi interactive- Pine+64 only heatsink: Scaling Governor: cpufreq-sunxi interactive

Raspberry Pi 3 Linux Benchmark Comparisonencode-flac: WAV To FLACopenssl: RSA 4096-bit Performancehimeno: Poisson Pressure Solvermafft: Multiple Sequence Alignmentsmallpt: Global Illumination Renderer; 100 Samplesc-ray: Total Timejohn-the-ripper: BlowfishODROID C1 PlusRaspberry Pi ZeroRaspberry Pi 2Orange Pi PlusOrange Pi PCJetson TX1Jetson TK1Banana Pi M2Raspberry Pi 3Pine64+Pine64+ take 2Pine64+ take 3Pine64+ take4Pine64+ ARMv8Orange Pi PC ArmbianPine64+ ARMv8 -O3Pine64+ in enclosurePine64+ enclosure+heatsinkPine64+ encl/heatsink/cpufreqPine64+ encl/heatsink/trip pointsPine+64 only fanPine+64 only heatsink200.5018.8081.9751.541590323.08494606.762.6010.00501.11120293037.5788.73314.5811.9333.2975.462175505.44387257.877.8364.38103.0530421424.86322261.8311.9359.2477.161982951.1031547.6424.6783.4016.5661385.30156350.2954.40141.3015.10288895.01422269.6313.4060.0871.581984436.18427228.3720.2562.5453.621388247.37629290.58497215.9213.8358.9457.611489289.96513215.2413.9762.6257.911470281.87547177.5818.4772.0042.031045210.23763223.1117.1766.2963.581550346.72542177.3518.5066.3743.74215208.71866234.339.4060.1680.651920354.50418217.0212.7062.4260.821574303.39532216.5013.5064.4462.181488283.69581208.5913.7061.0459.12299287.04661206.9514.4560.1152.82277265.88685206.9714.5762.2053.79280269.98712OpenBenchmarking.org

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarRaspberry Pi 3Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus2468106.781.030.795.072.923.588.084.071. Raspberry Pi 3: $35 reported cost. Average result: 237.26.2. Jetson TK1: $192 reported cost. Average result: 196.81.3. Jetson TX1: $599 reported cost. Average result: 471.18.4. Orange Pi PC: $25 reported cost. Average result: 126.84.5. Orange Pi Plus: $45 reported cost. Average result: 131.24.6. Raspberry Pi 2: $37 reported cost. Average result: 132.57.7. Raspberry Pi Zero: $5 reported cost. Average result: 40.41.8. ODROID C1 Plus: $45 reported cost. Average result: 183.06.

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format three times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.1WAV To FLACPine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus130260390520650SE +/- 0.12, N = 5SE +/- 0.11, N = 5SE +/- 1.24, N = 5SE +/- 0.65, N = 5SE +/- 1.09, N = 5SE +/- 0.68, N = 5SE +/- 0.16, N = 5SE +/- 0.63, N = 5SE +/- 0.19, N = 5SE +/- 0.33, N = 5SE +/- 0.25, N = 5SE +/- 0.36, N = 5SE +/- 0.15, N = 5SE +/- 0.02, N = 5SE +/- 0.05, N = 5SE +/- 2.52, N = 5SE +/- 1.28, N = 5SE +/- 1.30, N = 5SE +/- 3.95, N = 5SE +/- 2.46, N = 5206.97206.95208.59216.50217.02234.33177.35223.11177.58215.24215.92228.37269.6350.2947.64261.83257.87314.58606.76200.501. (CXX) g++ options: -fvisibility=hidden -lm

OpenSSL

OpenBenchmarking.orgSigns Per Second Per Dollar, More Is BetterOpenSSL 1.0.1gPerformance / Cost - RSA 4096-bit PerformanceRaspberry Pi 3Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus0.13050.2610.39150.5220.65250.580.280.040.480.170.320.520.421. Raspberry Pi 3: $35 reported cost.2. Jetson TK1: $192 reported cost.3. Jetson TX1: $599 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi Zero: $5 reported cost.8. ODROID C1 Plus: $45 reported cost.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.0.1gRSA 4096-bit PerformancePine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus1224364860SE +/- 0.23, N = 3SE +/- 0.22, N = 6SE +/- 0.25, N = 3SE +/- 0.17, N = 3SE +/- 0.23, N = 6SE +/- 0.50, N = 6SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.12, N = 3SE +/- 0.18, N = 3SE +/- 0.71, N = 6SE +/- 0.00, N = 3SE +/- 0.06, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.03, N = 3SE +/- 0.00, N = 3SE +/- 0.00, N = 314.5714.4513.7013.5012.709.4018.5017.1718.4713.9713.8320.2513.4054.4024.6711.937.8311.932.6018.801. (CC) gcc options: -O3 -lssl -lcrypto -ldl

Himeno Benchmark

OpenBenchmarking.orgMFLOPS Per Dollar, More Is BetterHimeno Benchmark 3.0Performance / Cost - Poisson Pressure SolverRaspberry Pi 3Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus0.53331.06661.59992.13322.66651.790.740.142.371.430.902.001.821. Raspberry Pi 3: $35 reported cost.2. Jetson TK1: $192 reported cost.3. Jetson TX1: $599 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi Zero: $5 reported cost.8. ODROID C1 Plus: $45 reported cost.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverPine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus306090120150SE +/- 0.13, N = 3SE +/- 0.60, N = 3SE +/- 0.90, N = 5SE +/- 0.30, N = 3SE +/- 0.33, N = 3SE +/- 0.25, N = 3SE +/- 0.78, N = 3SE +/- 0.47, N = 3SE +/- 1.45, N = 3SE +/- 0.86, N = 3SE +/- 1.18, N = 3SE +/- 1.51, N = 6SE +/- 0.79, N = 3SE +/- 1.48, N = 3SE +/- 0.85, N = 3SE +/- 0.40, N = 3SE +/- 0.06, N = 3SE +/- 0.47, N = 3SE +/- 0.07, N = 3SE +/- 1.42, N = 362.2060.1161.0464.4462.4260.1666.3766.2972.0062.6258.9462.5460.08141.3083.4059.2464.3833.2910.0081.971. (CC) gcc options: -O3

Timed MAFFT Alignment

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 6.864Multiple Sequence AlignmentPine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus110220330440550SE +/- 1.35, N = 6SE +/- 0.47, N = 3SE +/- 1.31, N = 6SE +/- 0.63, N = 3SE +/- 1.79, N = 6SE +/- 1.33, N = 6SE +/- 0.79, N = 3SE +/- 0.08, N = 3SE +/- 0.64, N = 5SE +/- 1.53, N = 6SE +/- 0.51, N = 3SE +/- 1.03, N = 3SE +/- 2.05, N = 6SE +/- 0.34, N = 6SE +/- 0.07, N = 3SE +/- 0.42, N = 3SE +/- 2.30, N = 6SE +/- 1.02, N = 3SE +/- 5.19, N = 3SE +/- 0.25, N = 353.7952.8259.1262.1860.8280.6543.7463.5842.0357.9157.6153.6271.5815.1016.5677.16103.0575.46501.1151.541. (CC) gcc options: -O3 -lm -lpthread

Smallpt

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 100 SamplesPine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus3K6K9K12K15KSE +/- 0.33, N = 3SE +/- 4.33, N = 3SE +/- 0.33, N = 3SE +/- 6.89, N = 3SE +/- 5.51, N = 3SE +/- 33.22, N = 3SE +/- 1.00, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 4.37, N = 3SE +/- 6.77, N = 3SE +/- 2.96, N = 3SE +/- 0.88, N = 3SE +/- 1.53, N = 3SE +/- 0.33, N = 3SE +/- 0.67, N = 3SE +/- 2.19, N = 3SE +/- 5.90, N = 3SE +/- 32.94, N = 3SE +/- 1.53, N = 328027729914881574192021515501045147014891388198428886131982304221751202915901. (CXX) g++ options: -fopenmp

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimePine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Pine64+Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus7001400210028003500SE +/- 1.51, N = 3SE +/- 0.41, N = 3SE +/- 1.69, N = 3SE +/- 2.61, N = 3SE +/- 2.49, N = 3SE +/- 0.50, N = 3SE +/- 0.18, N = 3SE +/- 2.00, N = 3SE +/- 1.60, N = 3SE +/- 1.06, N = 3SE +/- 0.45, N = 3SE +/- 1.51, N = 3SE +/- 0.58, N = 3SE +/- 0.38, N = 3SE +/- 5.21, N = 6SE +/- 1.22, N = 6SE +/- 5.09, N = 3SE +/- 16.48, N = 3SE +/- 0.74, N = 3SE +/- 15.62, N = 3SE +/- 1.77, N = 3269.98265.88287.04283.69303.39354.50208.71346.72210.23281.87289.96290.58247.37436.1895.0185.30951.101424.86505.443037.57323.081. (CC) gcc options: -lm -lpthread -O3

John The Ripper

OpenBenchmarking.orgReal C/S Per Dollar, More Is BetterJohn The Ripper 1.8.0Performance / Cost - Test: BlowfishRaspberry Pi 3Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus4812162017.972.202.6112.607.1610.4617.7510.981. Raspberry Pi 3: $35 reported cost.2. Jetson TK1: $192 reported cost.3. Jetson TX1: $599 reported cost.4. Orange Pi PC: $25 reported cost.5. Orange Pi Plus: $45 reported cost.6. Raspberry Pi 2: $37 reported cost.7. Raspberry Pi Zero: $5 reported cost.8. ODROID C1 Plus: $45 reported cost.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: BlowfishPine+64 only heatsinkPine+64 only fanPine64+ encl/heatsink/trip pointsPine64+ encl/heatsink/cpufreqPine64+ enclosure+heatsinkPine64+ in enclosurePine64+ ARMv8 -O3Orange Pi PC ArmbianPine64+ ARMv8Pine64+ take4Pine64+ take 2Pine64+Raspberry Pi 3Banana Pi M2Jetson TK1Jetson TX1Orange Pi PCOrange Pi PlusRaspberry Pi 2Raspberry Pi ZeroODROID C1 Plus30060090012001500SE +/- 11.02, N = 3SE +/- 4.67, N = 3SE +/- 9.35, N = 3SE +/- 10.53, N = 3SE +/- 12.09, N = 6SE +/- 8.73, N = 6SE +/- 14.63, N = 6SE +/- 2.40, N = 3SE +/- 8.69, N = 3SE +/- 9.10, N = 4SE +/- 17.62, N = 6SE +/- 19.34, N = 6SE +/- 9.50, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 1.73, N = 3SE +/- 14.50, N = 6SE +/- 0.00, N = 3SE +/- 0.67, N = 3SE +/- 1.73, N = 3SE +/- 0.33, N = 3712.00685.00661.00581.00532.00418.00866.00542.00763.00547.00513.00497.00629.00427.00422.001563.00315.00322.00387.0088.73494.001. (CC) gcc options: -fopenmp

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 836MB, Disk: 8GB SD

OS: Ubuntu 14.04, Kernel: 3.10.80-135 (armv7l), Desktop: LXDE 0.6.1, Display Server: X Server 1.15.1, OpenGL: 2.1 Mesa 10.1.3, Compiler: GCC 4.9.3, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance

Testing initiated at 5 January 2016 20:42 by user odroid.

Raspberry Pi Zero

Processor: ARMv6-compatible rev 7 @ 1.00GHz (1 Core), Motherboard: BCM2708 Raspberry Pi ? Rev 1.2, Memory: 434MB, Disk: 8GB SL08G

OS: Raspbian 8.0, Kernel: 4.1.13+ (armv6l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1776x952

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 01:22 by user pi.

Raspberry Pi 2

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Orange Pi Plus

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 01:35 by user root.

Orange Pi PC

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 16GB SL16G

OS: Raspbian GNU/Linux 7, Kernel: 3.4.39 (armv7l), Desktop: LXDE 0.7.1, Display Server: X Server 1.12.4, Compiler: GCC 4.6.3, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-languages=c,c++,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 7 January 2016 19:03 by user root.

Jetson TX1

Processor: Cortex A57 rev 1 @ 1.91GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA Tegra X1 (nvgpu)/, Monitor: Acer G237HL

OS: Ubuntu 14.04, Kernel: 3.10.67-g3a5c467 (aarch64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 23.1.1, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + Clang 3.4-1ubuntu3 + CUDA 7.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 20:16 by user ubuntu.

Jetson TK1

Processor: ARMv7 rev 3 @ 2.32GHz (4 Cores), Motherboard: jetson-tk1, Memory: 2048MB, Disk: 16GB SEM16G, Graphics: GK20A/NullRM/AXI, Network: Realtek RTL8111/8168/8411

OS: Ubuntu 14.04, Kernel: 3.10.40-gdacac96 (armv7l), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 21.4, OpenGL: 4.3.0, Compiler: GCC 4.8.4 + CUDA 6.5, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: tegra interactive

Testing initiated at 8 January 2016 22:06 by user ubuntu.

Banana Pi M2

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Banana Pi BPI-M2, Memory: 1024MB, Disk: 8GB SD

OS: Debian 8.1, Kernel: 4.2.0-BPI-kernel+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 10 January 2016 14:02 by user pi.

Raspberry Pi 3

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 16GB SD16G, Graphics: LLVMpipe

OS: Raspbian 8.0, Kernel: 4.1.18-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.17.2, OpenGL: 3.0 Mesa 11.1.0 Gallium 0.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 4 March 2016 23:10 by user pi.

Pine64+

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Desktop: Xfce 4.12, Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 11:28 by user ubuntu.

Pine64+ take 2

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 2560x1578

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 12:11 by user ubuntu.

Pine64+ take 3

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 18:19 by user ubuntu.

Pine64+ take4

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SE32G, Graphics: NVIDIA GeForce GT 650M

OS: Ubuntu 16.04, Kernel: 3.10.65+ (aarch64), Display Server: X Server 1.17.3, Display Driver: modesetting 1.17.3, OpenGL: 1.4, Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1440x878

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 6 March 2016 18:24 by user ubuntu.

Pine64+ ARMv8

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 11:07 by user tk.

Orange Pi PC Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 14:12 by user tk.

Pine64+ ARMv8 -O3

Processor: AArch64 rev 4 @ 1.34GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi performance

Testing initiated at 8 March 2016 17:04 by user tk.

Pine64+ in enclosure

Processor: AArch64 rev 4 @ 1.10GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 08:00 by user tk.

Pine64+ enclosure+heatsink

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 13:42 by user tk.

Pine64+ encl/heatsink/cpufreq

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 10 March 2016 17:32 by user tk.

Pine64+ encl/heatsink/trip points

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 09:42 by user tk.

Pine+64 only fan

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 13:29 by user tk.

Pine+64 only heatsink

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 16GB SD16G

OS: Ubuntu 16.04, Kernel: 3.10.65-2-pine64-longsleep (aarch64), Compiler: GCC 5.3.1 20160225, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 11 March 2016 14:40 by user tk.