dmesg - 202411201631

Return To 202411201631 System Information

Booting Linux on physical CPU 0x0000000200 [0x700f3034]
Linux version 5.4.18-63.52-e2000-rc17-20230601-generic (build@build-kvmvirtualmachine) (gcc version 9.3.0 (Ubuntu 9.3.0-10kylin2)) #20230601 SMP PREEMPT Mon Dec 4 10:35:12 CST 2023 (KYLINOS 5.4.18-63.52-e2000-rc16-generic 5.4.18-63)
efi: Getting EFI parameters from FDT:
efi: EFI v2.70 by Cherry Platform
efi:  SMBIOS=0xf6c20000  SMBIOS 3.0=0xf6c00000  ACPI 2.0=0xf6cf0018  MEMATTR=0xf8a70018  MEMRESERVE=0xf2a54e98 
secureboot: Secure boot disabled
cma: Reserved 32 MiB at 0x00000000f9c00000
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000F6CF0018 000024 (v02 PHYLTD)
ACPI: XSDT 0x00000000F6CFFE98 00006C (v01 PHYLTD PHYTIUM. 00000001      01000013)
ACPI: FACP 0x00000000F6CFFA98 000114 (v06 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: DSDT 0x00000000F6CF7518 004625 (v02 PHYLTD PHYTIUM. 20200308 INTL 20190509)
ACPI: GTDT 0x00000000F6CFFC18 000098 (v02 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: IORT 0x00000000F6CFFD18 0000D8 (v00 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: APIC 0x00000000F6CFE998 000198 (v04 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: MCFG 0x00000000F6CFFE18 00003C (v01 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: PCCT 0x00000000F6CFF698 0000EA (v02 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: SSDT 0x00000000F6CFEC18 0004AC (v02 PHYLTD PHYTIUM. 00000001 INTL 20190509)
ACPI: SPCR 0x00000000F6CFFF98 000050 (v02 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: PPTT 0x00000000F6CFF818 0001D2 (v01 PHYLTD PHYTIUM. 00000001 PHYT 00000001)
ACPI: SPCR: console: pl011,mmio32,0x2800d000,115200
ACPI: NUMA: Failed to initialise from firmware
NUMA: Faking a node at [mem 0x0000000080000000-0x000000207fffffff]
NUMA: NODE_DATA [mem 0x207ffea180-0x207ffecfff]
Zone ranges:
  DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000207fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x00000000dfc1cfff]
  node   0: [mem 0x00000000dfc1d000-0x00000000e3c1cfff]
  node   0: [mem 0x00000000e3c1d000-0x00000000f2a2ffff]
  node   0: [mem 0x00000000f2a30000-0x00000000f2a4ffff]
  node   0: [mem 0x00000000f2a50000-0x00000000f2a5afff]
  node   0: [mem 0x00000000f2a5b000-0x00000000f6a5afff]
  node   0: [mem 0x00000000f6a5b000-0x00000000f6beffff]
  node   0: [mem 0x00000000f6bf0000-0x00000000f6ceffff]
  node   0: [mem 0x00000000f6cf0000-0x00000000f6cfffff]
  node   0: [mem 0x00000000f6d00000-0x00000000f6f7ffff]
  node   0: [mem 0x00000000f6f80000-0x00000000f94d1fff]
  node   0: [mem 0x00000000f94d2000-0x00000000f97d1fff]
  node   0: [mem 0x00000000f97d2000-0x00000000fbf4ffff]
  node   0: [mem 0x00000000fbf50000-0x00000000fbf8ffff]
  node   0: [mem 0x00000000fbf90000-0x00000000fbf9ffff]
  node   0: [mem 0x00000000fbfa0000-0x00000000fbfeffff]
  node   0: [mem 0x00000000fbff0000-0x00000000fbffffff]
  node   0: [mem 0x0000002000000000-0x000000207fffffff]
Zeroed struct page in unavailable ranges: 1382 pages
Initmem setup node 0 [mem 0x0000000080000000-0x000000207fffffff]
On node 0 totalpages: 1032192
  DMA32 zone: 8192 pages used for memmap
  DMA32 zone: 0 pages reserved
  DMA32 zone: 507904 pages, LIFO batch:63
  Normal zone: 8192 pages used for memmap
  Normal zone: 524288 pages, LIFO batch:63
psci: probing for conduit method from ACPI.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.0
ACPI: SRAT not present
percpu: Embedded 22 pages/cpu s53208 r8192 d28712 u90112
pcpu-alloc: s53208 r8192 d28712 u90112 alloc=22*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: kernel page table isolation forced OFF by mitigations=off
spectrev2 mitigation disabled by command line option
Built 1 zonelists, mobility grouping on.  Total pages: 1015808
Policy zone: Normal
audit: disabled (until reboot)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0xea0f0000-0xee0f0000] (64MB)
Memory: 3772856K/4128768K available (11580K kernel code, 1450K rwdata, 6760K rodata, 768K init, 3172K bss, 323144K reserved, 32768K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 256 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: no VLPI support, no direct LPI support
GICv3: CPU0: found redistributor 200 region 0:0x00000000308c0000
ACPI: SRAT not present
ITS [mem 0x30820000-0x3083ffff]
ITS@0x0000000030820000: allocated 65536 Devices @207b080000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x000000207b040000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x000000207b050000
random: get_random_bytes called from start_kernel+0x2f8/0x490 with crng_init=0
arch_timer: cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
ACPI: Core revision 20190816
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Box:  Initializing.
Box :  Initialized successfully.
KYEXTEND: Initialized successfully.
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
ASID allocator initialised with 32768 entries
rcu: Hierarchical SRCU implementation.
Platform MSI: ITS@0x30820000 domain created
PCI/MSI: ITS@0x30820000 domain created
Remapping and enabling EFI services.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 201 region 1:0x00000000308e0000
GICv3: CPU1: using allocated LPI pending table @0x000000207b060000
CPU1: Booted secondary processor 0x0000000201 [0x700f3034]
Detected PIPT I-cache on CPU2
CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64ISAR0_EL1. Boot CPU: 0x00011100012120, CPU2: 0x00000100012120
CPU features: SANITY CHECK: Unexpected variation in SYS_MVFR0_EL1. Boot CPU: 0x00000010110222, CPU2: 0x00000010111222
CPU features: Unsupported CPU feature variation detected.
GICv3: CPU2: found redistributor 0 region 2:0x0000000030880000
GICv3: CPU2: using allocated LPI pending table @0x000000207b070000
CPU2: Booted secondary processor 0x0000000000 [0x701f6643]
Detected PIPT I-cache on CPU3
CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64ISAR0_EL1. Boot CPU: 0x00011100012120, CPU3: 0x00000100012120
CPU features: SANITY CHECK: Unexpected variation in SYS_MVFR0_EL1. Boot CPU: 0x00000010110222, CPU3: 0x00000010111222
GICv3: CPU3: found redistributor 100 region 3:0x00000000308a0000
GICv3: CPU3: using allocated LPI pending table @0x000000207b100000
CPU3: Booted secondary processor 0x0000000100 [0x701f6643]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
device: 'platform': device_add
PM: Adding info for No Bus:platform
bus: 'platform': registered
bus: 'cpu': registered
device: 'cpu': device_add
PM: Adding info for No Bus:cpu
bus: 'memory': registered
device: 'memory': device_add
PM: Adding info for No Bus:memory
device: 'memory2': device_add
bus: 'memory': add device memory2
PM: Adding info for memory:memory2
device: 'memory3': device_add
bus: 'memory': add device memory3
PM: Adding info for memory:memory3
device: 'memory128': device_add
bus: 'memory': add device memory128
PM: Adding info for memory:memory128
device: 'memory129': device_add
bus: 'memory': add device memory129
PM: Adding info for memory:memory129
bus: 'container': registered
device: 'container': device_add
PM: Adding info for No Bus:container
Registered cp15_barrier emulation handler
Registered setend emulation handler
bus: 'workqueue': registered
device: 'workqueue': device_add
PM: Adding info for No Bus:workqueue
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
bus: 'platform': add driver ARM-CCI
pinctrl core: initialized pinctrl subsystem
bus: 'gpio': registered
bus: 'virtio': registered
device class 'regulator': registering
Registering platform device 'reg-dummy'. Parent at platform
device: 'reg-dummy': device_add
bus: 'platform': add device reg-dummy
PM: Adding info for platform:reg-dummy
bus: 'platform': add driver reg-dummy
bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy
bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
reg-dummy reg-dummy: no default pinctrl state
device: 'regulator.0': device_add
PM: Adding info for No Bus:regulator.0
driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
bus: 'genpd': registered
bus: 'soc': registered
bus: 'platform': add driver vexpress-syscfg
bus: 'platform': add driver vexpress-sysreg
SMBIOS 3.3.0 present.
DMI: anntec.cn S-E2004/S-E2004, BIOS 0 Sep 25 2024
bus: 'platform': add driver hi3660-clk
bus: 'platform': add driver hi3670-clk
bus: 'platform': add driver vexpress-osc
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic allocations
device class 'bdi': registering
device class 'gpio': registering
device class 'pci_bus': registering
bus: 'pci': registered
bus: 'pci_express': registered
device class 'rapidio_port': registering
bus: 'rapidio': registered
device class 'lcd': registering
device class 'backlight': registering
bus: 'amba': registered
bus: 'platform': add driver reset-hi6220
device class 'tty': registering
device class 'vtconsole': registering
device: 'vtcon0': device_add
PM: Adding info for No Bus:vtcon0
bus: 'serial': registered
device class 'iommu': registering
device class 'wakeup': registering
bus: 'node': registered
device: 'node': device_add
PM: Adding info for No Bus:node
bus: 'platform': add driver sram
bus: 'platform': add driver syscon
bus: 'mipi-dsi': registered
bus: 'spi': registered
device class 'spi_master': registering
device class 'spi_slave': registering
bus: 'i2c': registered
bus: 'i2c': add driver dummy
Detected 3 PCC Subspaces
Registering platform device 'PCCT'. Parent at platform
device: 'PCCT': device_add
bus: 'platform': add device PCCT
PM: Adding info for platform:PCCT
bus: 'platform': add driver PCCT
bus: 'platform': driver_probe_device: matched device PCCT with driver PCCT
bus: 'platform': really_probe: probing driver PCCT with device PCCT
PCCT PCCT: no default pinctrl state
Registering PCC driver as Mailbox controller
driver: 'PCCT': driver_bound: bound to device 'PCCT'
bus: 'platform': really_probe: bound device PCCT to driver PCCT
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
device class 'dma': registering
bus: 'platform': add driver hi3660-reset
bus: 'platform': add driver sbsa-uart
bus: 'amba': add driver uart-pl011
device class 'dmi': registering
device: 'id': device_add
PM: Adding info for No Bus:id
bus: 'platform': add driver phytium clock
device: 'node0': device_add
bus: 'node': add device node0
PM: Adding info for node:node0
device: 'cpu0': device_add
bus: 'cpu': add device cpu0
PM: Adding info for cpu:cpu0
device: 'cpu1': device_add
bus: 'cpu': add device cpu1
PM: Adding info for cpu:cpu1
device: 'cpu2': device_add
bus: 'cpu': add device cpu2
PM: Adding info for cpu:cpu2
device: 'cpu3': device_add
bus: 'cpu': add device cpu3
PM: Adding info for cpu:cpu3
device: 'writeback': device_add
bus: 'workqueue': add device writeback
PM: Adding info for workqueue:writeback
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
device class 'block': registering
device: 'blkcg_punt_bio': device_add
bus: 'workqueue': add device blkcg_punt_bio
PM: Adding info for workqueue:blkcg_punt_bio
bus: 'platform': add driver gpio-phytium-platform
bus: 'platform': add driver palmas-gpio
bus: 'platform': add driver rc5t583-gpio
bus: 'platform': add driver stmpe-gpio
bus: 'platform': add driver tc3589x-gpio
bus: 'platform': add driver tps6586x-gpio
bus: 'platform': add driver tps65910-gpio
device class 'pwm': registering
bus: 'platform': add driver xgene-msi
bus: 'platform': add driver altera-msi
device class 'graphics': registering
device: 'fbcon': device_add
PM: Adding info for No Bus:fbcon
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: Using GIC for interrupt routing
bus: 'acpi': registered
ACPI: MCFG table detected, 1 entries
Registering platform device 'arm-smmu-v3.0.auto'. Parent at platform
device: 'arm-smmu-v3.0.auto': device_add
bus: 'platform': add device arm-smmu-v3.0.auto
PM: Adding info for platform:arm-smmu-v3.0.auto
device: 'LNXSYSTM:00': device_add
bus: 'acpi': add device LNXSYSTM:00
PM: Adding info for acpi:LNXSYSTM:00
device: 'LNXSYBUS:00': device_add
bus: 'acpi': add device LNXSYBUS:00
PM: Adding info for acpi:LNXSYBUS:00
device: 'ACPI0010:00': device_add
bus: 'acpi': add device ACPI0010:00
PM: Adding info for acpi:ACPI0010:00
device: 'ACPI0007:00': device_add
bus: 'acpi': add device ACPI0007:00
PM: Adding info for acpi:ACPI0007:00
device: 'ACPI0007:01': device_add
bus: 'acpi': add device ACPI0007:01
PM: Adding info for acpi:ACPI0007:01
device: 'ACPI0010:01': device_add
bus: 'acpi': add device ACPI0010:01
PM: Adding info for acpi:ACPI0010:01
device: 'ACPI0007:02': device_add
bus: 'acpi': add device ACPI0007:02
PM: Adding info for acpi:ACPI0007:02
device: 'ACPI0010:02': device_add
bus: 'acpi': add device ACPI0010:02
PM: Adding info for acpi:ACPI0010:02
device: 'ACPI0007:03': device_add
bus: 'acpi': add device ACPI0007:03
PM: Adding info for acpi:ACPI0007:03
device: 'PHYT8002:00': device_add
bus: 'acpi': add device PHYT8002:00
PM: Adding info for acpi:PHYT8002:00
device: 'ARMH0011:00': device_add
bus: 'acpi': add device ARMH0011:00
PM: Adding info for acpi:ARMH0011:00
device: 'ARMH0011:01': device_add
bus: 'acpi': add device ARMH0011:01
PM: Adding info for acpi:ARMH0011:01
device: 'ARMH0011:02': device_add
bus: 'acpi': add device ARMH0011:02
PM: Adding info for acpi:ARMH0011:02
device: 'ARMH0011:03': device_add
bus: 'acpi': add device ARMH0011:03
PM: Adding info for acpi:ARMH0011:03
device: 'ARMH0011:04': device_add
bus: 'acpi': add device ARMH0011:04
PM: Adding info for acpi:ARMH0011:04
device: 'ARMH0011:05': device_add
bus: 'acpi': add device ARMH0011:05
PM: Adding info for acpi:ARMH0011:05
device: 'ARMH0011:06': device_add
bus: 'acpi': add device ARMH0011:06
PM: Adding info for acpi:ARMH0011:06
device: 'ARMH0011:07': device_add
bus: 'acpi': add device ARMH0011:07
PM: Adding info for acpi:ARMH0011:07
device: 'ARMH0011:08': device_add
bus: 'acpi': add device ARMH0011:08
PM: Adding info for acpi:ARMH0011:08
device: 'ARMH0011:09': device_add
bus: 'acpi': add device ARMH0011:09
PM: Adding info for acpi:ARMH0011:09
device: 'ARMH0011:0a': device_add
bus: 'acpi': add device ARMH0011:0a
PM: Adding info for acpi:ARMH0011:0a
device: 'ARMH0011:0b': device_add
bus: 'acpi': add device ARMH0011:0b
PM: Adding info for acpi:ARMH0011:0b
device: 'ARMH0011:0c': device_add
bus: 'acpi': add device ARMH0011:0c
PM: Adding info for acpi:ARMH0011:0c
device: 'ARMH0011:0d': device_add
bus: 'acpi': add device ARMH0011:0d
PM: Adding info for acpi:ARMH0011:0d
device: 'ARMH0011:0e': device_add
bus: 'acpi': add device ARMH0011:0e
PM: Adding info for acpi:ARMH0011:0e
device: 'ARMH0011:0f': device_add
bus: 'acpi': add device ARMH0011:0f
PM: Adding info for acpi:ARMH0011:0f
device: 'ARMH0011:10': device_add
bus: 'acpi': add device ARMH0011:10
PM: Adding info for acpi:ARMH0011:10
device: 'ARMH0011:11': device_add
bus: 'acpi': add device ARMH0011:11
PM: Adding info for acpi:ARMH0011:11
device: 'ARMH0011:12': device_add
bus: 'acpi': add device ARMH0011:12
PM: Adding info for acpi:ARMH0011:12
device: 'ARMH0011:13': device_add
bus: 'acpi': add device ARMH0011:13
PM: Adding info for acpi:ARMH0011:13
device: 'PHYT0001:00': device_add
bus: 'acpi': add device PHYT0001:00
PM: Adding info for acpi:PHYT0001:00
device: 'device:00': device_add
bus: 'acpi': add device device:00
PM: Adding info for acpi:device:00
device: 'PHYT0001:01': device_add
bus: 'acpi': add device PHYT0001:01
PM: Adding info for acpi:PHYT0001:01
device: 'device:01': device_add
bus: 'acpi': add device device:01
PM: Adding info for acpi:device:01
device: 'PHYT0001:02': device_add
bus: 'acpi': add device PHYT0001:02
PM: Adding info for acpi:PHYT0001:02
device: 'device:02': device_add
bus: 'acpi': add device device:02
PM: Adding info for acpi:device:02
device: 'PHYT0001:03': device_add
bus: 'acpi': add device PHYT0001:03
PM: Adding info for acpi:PHYT0001:03
device: 'device:03': device_add
bus: 'acpi': add device device:03
PM: Adding info for acpi:device:03
device: 'PHYT0001:04': device_add
bus: 'acpi': add device PHYT0001:04
PM: Adding info for acpi:PHYT0001:04
device: 'device:04': device_add
bus: 'acpi': add device device:04
PM: Adding info for acpi:device:04
device: 'PHYT0001:05': device_add
bus: 'acpi': add device PHYT0001:05
PM: Adding info for acpi:PHYT0001:05
device: 'device:05': device_add
bus: 'acpi': add device device:05
PM: Adding info for acpi:device:05
device: 'PHYT8002:01': device_add
bus: 'acpi': add device PHYT8002:01
PM: Adding info for acpi:PHYT8002:01
device: 'PHYT0038:00': device_add
bus: 'acpi': add device PHYT0038:00
PM: Adding info for acpi:PHYT0038:00
device: 'PHYT0038:01': device_add
bus: 'acpi': add device PHYT0038:01
PM: Adding info for acpi:PHYT0038:01
device: 'PHYT0038:02': device_add
bus: 'acpi': add device PHYT0038:02
PM: Adding info for acpi:PHYT0038:02
device: 'PHYT0038:03': device_add
bus: 'acpi': add device PHYT0038:03
PM: Adding info for acpi:PHYT0038:03
device: 'PHYT0038:04': device_add
bus: 'acpi': add device PHYT0038:04
PM: Adding info for acpi:PHYT0038:04
device: 'PHYT0038:05': device_add
bus: 'acpi': add device PHYT0038:05
PM: Adding info for acpi:PHYT0038:05
device: 'PHYT0038:06': device_add
bus: 'acpi': add device PHYT0038:06
PM: Adding info for acpi:PHYT0038:06
device: 'PHYT0038:07': device_add
bus: 'acpi': add device PHYT0038:07
PM: Adding info for acpi:PHYT0038:07
device: 'PHYT0038:08': device_add
bus: 'acpi': add device PHYT0038:08
PM: Adding info for acpi:PHYT0038:08
device: 'PHYT0038:09': device_add
bus: 'acpi': add device PHYT0038:09
PM: Adding info for acpi:PHYT0038:09
device: 'PHYT0038:0a': device_add
bus: 'acpi': add device PHYT0038:0a
PM: Adding info for acpi:PHYT0038:0a
device: 'PHYT0038:0b': device_add
bus: 'acpi': add device PHYT0038:0b
PM: Adding info for acpi:PHYT0038:0b
device: 'PHYT0038:0c': device_add
bus: 'acpi': add device PHYT0038:0c
PM: Adding info for acpi:PHYT0038:0c
device: 'PHYT0038:0d': device_add
bus: 'acpi': add device PHYT0038:0d
PM: Adding info for acpi:PHYT0038:0d
device: 'PHYT0038:0e': device_add
bus: 'acpi': add device PHYT0038:0e
PM: Adding info for acpi:PHYT0038:0e
device: 'PHYT0038:0f': device_add
bus: 'acpi': add device PHYT0038:0f
PM: Adding info for acpi:PHYT0038:0f
device: 'LNXTHERM:00': device_add
bus: 'acpi': add device LNXTHERM:00
PM: Adding info for acpi:LNXTHERM:00
device: 'PHYT0015:00': device_add
bus: 'acpi': add device PHYT0015:00
PM: Adding info for acpi:PHYT0015:00
device: 'PHYT0016:00': device_add
bus: 'acpi': add device PHYT0016:00
PM: Adding info for acpi:PHYT0016:00
device: 'PHYT0016:01': device_add
bus: 'acpi': add device PHYT0016:01
PM: Adding info for acpi:PHYT0016:01
device: 'PHYT8006:00': device_add
bus: 'acpi': add device PHYT8006:00
PM: Adding info for acpi:PHYT8006:00
device: 'PHYT0017:00': device_add
bus: 'acpi': add device PHYT0017:00
PM: Adding info for acpi:PHYT0017:00
device: 'PHYT0017:01': device_add
bus: 'acpi': add device PHYT0017:01
PM: Adding info for acpi:PHYT0017:01
device: 'PHYT000E:00': device_add
bus: 'acpi': add device PHYT000E:00
PM: Adding info for acpi:PHYT000E:00
device: 'SPT0001:00': device_add
bus: 'acpi': add device SPT0001:00
PM: Adding info for acpi:SPT0001:00
device: 'PHYT000E:01': device_add
bus: 'acpi': add device PHYT000E:01
PM: Adding info for acpi:PHYT000E:01
device: 'SPT0001:01': device_add
bus: 'acpi': add device SPT0001:01
PM: Adding info for acpi:SPT0001:01
device: 'PHYT000E:02': device_add
bus: 'acpi': add device PHYT000E:02
PM: Adding info for acpi:PHYT000E:02
device: 'SPT0001:02': device_add
bus: 'acpi': add device SPT0001:02
PM: Adding info for acpi:SPT0001:02
device: 'PHYT000E:03': device_add
bus: 'acpi': add device PHYT000E:03
PM: Adding info for acpi:PHYT000E:03
device: 'SPT0001:03': device_add
bus: 'acpi': add device SPT0001:03
PM: Adding info for acpi:SPT0001:03
device: 'PHYT0006:00': device_add
bus: 'acpi': add device PHYT0006:00
PM: Adding info for acpi:PHYT0006:00
device: 'PHYT0037:00': device_add
bus: 'acpi': add device PHYT0037:00
PM: Adding info for acpi:PHYT0037:00
device: 'PHYT0037:01': device_add
bus: 'acpi': add device PHYT0037:01
PM: Adding info for acpi:PHYT0037:01
device: 'PHYT0037:02': device_add
bus: 'acpi': add device PHYT0037:02
PM: Adding info for acpi:PHYT0037:02
device: 'PHYT0039:00': device_add
bus: 'acpi': add device PHYT0039:00
PM: Adding info for acpi:PHYT0039:00
device: 'PHYT0039:01': device_add
bus: 'acpi': add device PHYT0039:01
PM: Adding info for acpi:PHYT0039:01
device: 'PHYT0020:00': device_add
bus: 'acpi': add device PHYT0020:00
PM: Adding info for acpi:PHYT0020:00
device: 'PHYT0020:01': device_add
bus: 'acpi': add device PHYT0020:01
PM: Adding info for acpi:PHYT0020:01
device: 'PHYT0011:00': device_add
bus: 'acpi': add device PHYT0011:00
PM: Adding info for acpi:PHYT0011:00
device: 'SPT0001:04': device_add
bus: 'acpi': add device SPT0001:04
PM: Adding info for acpi:SPT0001:04
device: 'PHYT0029:00': device_add
bus: 'acpi': add device PHYT0029:00
PM: Adding info for acpi:PHYT0029:00
device: 'PHYT0029:01': device_add
bus: 'acpi': add device PHYT0029:01
PM: Adding info for acpi:PHYT0029:01
device: 'PHYT0029:02': device_add
bus: 'acpi': add device PHYT0029:02
PM: Adding info for acpi:PHYT0029:02
device: 'PHYT0029:03': device_add
bus: 'acpi': add device PHYT0029:03
PM: Adding info for acpi:PHYT0029:03
device: 'PHYT0029:04': device_add
bus: 'acpi': add device PHYT0029:04
PM: Adding info for acpi:PHYT0029:04
device: 'PHYT0029:05': device_add
bus: 'acpi': add device PHYT0029:05
PM: Adding info for acpi:PHYT0029:05
device: 'PHYT0029:06': device_add
bus: 'acpi': add device PHYT0029:06
PM: Adding info for acpi:PHYT0029:06
device: 'PHYT0029:07': device_add
bus: 'acpi': add device PHYT0029:07
PM: Adding info for acpi:PHYT0029:07
device: 'PHYT8002:02': device_add
bus: 'acpi': add device PHYT8002:02
PM: Adding info for acpi:PHYT8002:02
device: 'PHYT000A:00': device_add
bus: 'acpi': add device PHYT000A:00
PM: Adding info for acpi:PHYT000A:00
device: 'PHYT000A:01': device_add
bus: 'acpi': add device PHYT000A:01
PM: Adding info for acpi:PHYT000A:01
device: 'PHYT0019:00': device_add
bus: 'acpi': add device PHYT0019:00
PM: Adding info for acpi:PHYT0019:00
device: 'PHYT0036:00': device_add
bus: 'acpi': add device PHYT0036:00
PM: Adding info for acpi:PHYT0036:00
device: 'PHYT0036:01': device_add
bus: 'acpi': add device PHYT0036:01
PM: Adding info for acpi:PHYT0036:01
device: 'PHYT0036:02': device_add
bus: 'acpi': add device PHYT0036:02
PM: Adding info for acpi:PHYT0036:02
device: 'PHYT0036:03': device_add
bus: 'acpi': add device PHYT0036:03
PM: Adding info for acpi:PHYT0036:03
device: 'ESSX8336:00': device_add
bus: 'acpi': add device ESSX8336:00
PM: Adding info for acpi:ESSX8336:00
device: 'PHYT8005:00': device_add
bus: 'acpi': add device PHYT8005:00
PM: Adding info for acpi:PHYT8005:00
device: 'PHYT0016:02': device_add
bus: 'acpi': add device PHYT0016:02
PM: Adding info for acpi:PHYT0016:02
device: 'PNP0C0F:00': device_add
bus: 'acpi': add device PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:00
device: 'PNP0C0F:01': device_add
bus: 'acpi': add device PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:01
device: 'PNP0C0F:02': device_add
bus: 'acpi': add device PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:02
device: 'PNP0C0F:03': device_add
bus: 'acpi': add device PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:03
device: 'PNP0C02:00': device_add
bus: 'acpi': add device PNP0C02:00
PM: Adding info for acpi:PNP0C02:00
device: 'PNP0A08:00': device_add
bus: 'acpi': add device PNP0A08:00
PM: Adding info for acpi:PNP0A08:00
device: 'LNXSYBUS:01': device_add
bus: 'acpi': add device LNXSYBUS:01
PM: Adding info for acpi:LNXSYBUS:01
Registering platform device 'PHYT8002:00'. Parent at platform
device: 'PHYT8002:00': device_add
bus: 'platform': add device PHYT8002:00
PM: Adding info for platform:PHYT8002:00
bus: 'platform': driver_probe_device: matched device PHYT8002:00 with driver phytium clock
bus: 'platform': really_probe: probing driver phytium clock with device PHYT8002:00
phytium clock PHYT8002:00: no default pinctrl state
device: 'wakeup0': device_add
driver: 'phytium clock': driver_bound: bound to device 'PHYT8002:00'
bus: 'platform': really_probe: bound device PHYT8002:00 to driver phytium clock
Registering platform device 'ARMH0011:00'. Parent at platform
device: 'ARMH0011:00': device_add
bus: 'platform': add device ARMH0011:00
PM: Adding info for platform:ARMH0011:00
bus: 'platform': driver_probe_device: matched device ARMH0011:00 with driver sbsa-uart
bus: 'platform': really_probe: probing driver sbsa-uart with device ARMH0011:00
sbsa-uart ARMH0011:00: no default pinctrl state
device: 'wakeup1': device_add
ARMH0011:00: ttyAMA0 at MMIO 0x2800c000 (irq = 9, base_baud = 0) is a SBSA
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyAMA0': device_add
PM: Adding info for No Bus:ttyAMA0
driver: 'sbsa-uart': driver_bound: bound to device 'ARMH0011:00'
bus: 'platform': really_probe: bound device ARMH0011:00 to driver sbsa-uart
Registering platform device 'ARMH0011:01'. Parent at platform
device: 'ARMH0011:01': device_add
bus: 'platform': add device ARMH0011:01
PM: Adding info for platform:ARMH0011:01
bus: 'platform': driver_probe_device: matched device ARMH0011:01 with driver sbsa-uart
bus: 'platform': really_probe: probing driver sbsa-uart with device ARMH0011:01
sbsa-uart ARMH0011:01: no default pinctrl state
device: 'wakeup2': device_add
ARMH0011:01: ttyAMA1 at MMIO 0x2800d000 (irq = 10, base_baud = 0) is a SBSA
printk: console [ttyAMA1] enabled
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyAMA1': device_add
PM: Adding info for No Bus:ttyAMA1
driver: 'sbsa-uart': driver_bound: bound to device 'ARMH0011:01'
bus: 'platform': really_probe: bound device ARMH0011:01 to driver sbsa-uart
Registering platform device 'ARMH0011:05'. Parent at platform
device: 'ARMH0011:05': device_add
bus: 'platform': add device ARMH0011:05
PM: Adding info for platform:ARMH0011:05
bus: 'platform': driver_probe_device: matched device ARMH0011:05 with driver sbsa-uart
bus: 'platform': really_probe: probing driver sbsa-uart with device ARMH0011:05
sbsa-uart ARMH0011:05: no default pinctrl state
device: 'wakeup3': device_add
ARMH0011:05: ttyAMA2 at MMIO 0x28016000 (irq = 11, base_baud = 0) is a SBSA
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyAMA2': device_add
PM: Adding info for No Bus:ttyAMA2
driver: 'sbsa-uart': driver_bound: bound to device 'ARMH0011:05'
bus: 'platform': really_probe: bound device ARMH0011:05 to driver sbsa-uart
Registering platform device 'ARMH0011:06'. Parent at platform
device: 'ARMH0011:06': device_add
bus: 'platform': add device ARMH0011:06
PM: Adding info for platform:ARMH0011:06
bus: 'platform': driver_probe_device: matched device ARMH0011:06 with driver sbsa-uart
bus: 'platform': really_probe: probing driver sbsa-uart with device ARMH0011:06
sbsa-uart ARMH0011:06: no default pinctrl state
device: 'wakeup4': device_add
ARMH0011:06: ttyAMA3 at MMIO 0x28018000 (irq = 12, base_baud = 0) is a SBSA
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyAMA3': device_add
PM: Adding info for No Bus:ttyAMA3
driver: 'sbsa-uart': driver_bound: bound to device 'ARMH0011:06'
bus: 'platform': really_probe: bound device ARMH0011:06 to driver sbsa-uart
Registering platform device 'ARMH0011:07'. Parent at platform
device: 'ARMH0011:07': device_add
bus: 'platform': add device ARMH0011:07
PM: Adding info for platform:ARMH0011:07
bus: 'platform': driver_probe_device: matched device ARMH0011:07 with driver sbsa-uart
bus: 'platform': really_probe: probing driver sbsa-uart with device ARMH0011:07
sbsa-uart ARMH0011:07: no default pinctrl state
device: 'wakeup5': device_add
ARMH0011:07: ttyAMA4 at MMIO 0x2801a000 (irq = 13, base_baud = 0) is a SBSA
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyAMA4': device_add
PM: Adding info for No Bus:ttyAMA4
driver: 'sbsa-uart': driver_bound: bound to device 'ARMH0011:07'
bus: 'platform': really_probe: bound device ARMH0011:07 to driver sbsa-uart
Registering platform device 'PHYT0001:00'. Parent at platform
device: 'PHYT0001:00': device_add
bus: 'platform': add device PHYT0001:00
PM: Adding info for platform:PHYT0001:00
bus: 'platform': driver_probe_device: matched device PHYT0001:00 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:00
gpio-phytium-platform PHYT0001:00: no default pinctrl state
device: 'wakeup6': device_add
gpio-phytium-platform PHYT0001:00: Found GPIO irq count: 16.
device: 'gpiochip0': device_add
bus: 'gpio': add device gpiochip0
PM: Adding info for gpio:gpiochip0
device: 'gpiochip496': device_add
PM: Adding info for No Bus:gpiochip496
gpio-phytium-platform PHYT0001:00: Phytium GPIO controller @0x0000000028034000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:00'
bus: 'platform': really_probe: bound device PHYT0001:00 to driver gpio-phytium-platform
Registering platform device 'PHYT0001:01'. Parent at platform
device: 'PHYT0001:01': device_add
bus: 'platform': add device PHYT0001:01
PM: Adding info for platform:PHYT0001:01
bus: 'platform': driver_probe_device: matched device PHYT0001:01 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:01
gpio-phytium-platform PHYT0001:01: no default pinctrl state
device: 'wakeup7': device_add
gpio-phytium-platform PHYT0001:01: Found GPIO irq count: 16.
device: 'gpiochip1': device_add
bus: 'gpio': add device gpiochip1
PM: Adding info for gpio:gpiochip1
device: 'gpiochip480': device_add
PM: Adding info for No Bus:gpiochip480
gpio-phytium-platform PHYT0001:01: Phytium GPIO controller @0x0000000028035000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:01'
bus: 'platform': really_probe: bound device PHYT0001:01 to driver gpio-phytium-platform
Registering platform device 'PHYT0001:02'. Parent at platform
device: 'PHYT0001:02': device_add
bus: 'platform': add device PHYT0001:02
PM: Adding info for platform:PHYT0001:02
bus: 'platform': driver_probe_device: matched device PHYT0001:02 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:02
gpio-phytium-platform PHYT0001:02: no default pinctrl state
device: 'wakeup8': device_add
gpio-phytium-platform PHYT0001:02: Found GPIO irq count: 16.
device: 'gpiochip2': device_add
bus: 'gpio': add device gpiochip2
PM: Adding info for gpio:gpiochip2
device: 'gpiochip464': device_add
PM: Adding info for No Bus:gpiochip464
gpio-phytium-platform PHYT0001:02: Phytium GPIO controller @0x0000000028036000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:02'
bus: 'platform': really_probe: bound device PHYT0001:02 to driver gpio-phytium-platform
Registering platform device 'PHYT0001:03'. Parent at platform
device: 'PHYT0001:03': device_add
bus: 'platform': add device PHYT0001:03
PM: Adding info for platform:PHYT0001:03
bus: 'platform': driver_probe_device: matched device PHYT0001:03 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:03
gpio-phytium-platform PHYT0001:03: no default pinctrl state
device: 'wakeup9': device_add
gpio-phytium-platform PHYT0001:03: Found GPIO irq count: 1.
device: 'gpiochip3': device_add
bus: 'gpio': add device gpiochip3
PM: Adding info for gpio:gpiochip3
device: 'gpiochip448': device_add
PM: Adding info for No Bus:gpiochip448
gpio-phytium-platform PHYT0001:03: Phytium GPIO controller @0x0000000028037000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:03'
bus: 'platform': really_probe: bound device PHYT0001:03 to driver gpio-phytium-platform
Registering platform device 'PHYT0001:04'. Parent at platform
device: 'PHYT0001:04': device_add
bus: 'platform': add device PHYT0001:04
PM: Adding info for platform:PHYT0001:04
bus: 'platform': driver_probe_device: matched device PHYT0001:04 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:04
gpio-phytium-platform PHYT0001:04: no default pinctrl state
device: 'wakeup10': device_add
gpio-phytium-platform PHYT0001:04: Found GPIO irq count: 1.
device: 'gpiochip4': device_add
bus: 'gpio': add device gpiochip4
PM: Adding info for gpio:gpiochip4
device: 'gpiochip432': device_add
PM: Adding info for No Bus:gpiochip432
gpio-phytium-platform PHYT0001:04: Phytium GPIO controller @0x0000000028038000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:04'
bus: 'platform': really_probe: bound device PHYT0001:04 to driver gpio-phytium-platform
Registering platform device 'PHYT0001:05'. Parent at platform
device: 'PHYT0001:05': device_add
bus: 'platform': add device PHYT0001:05
PM: Adding info for platform:PHYT0001:05
bus: 'platform': driver_probe_device: matched device PHYT0001:05 with driver gpio-phytium-platform
bus: 'platform': really_probe: probing driver gpio-phytium-platform with device PHYT0001:05
gpio-phytium-platform PHYT0001:05: no default pinctrl state
device: 'wakeup11': device_add
gpio-phytium-platform PHYT0001:05: Found GPIO irq count: 1.
device: 'gpiochip5': device_add
bus: 'gpio': add device gpiochip5
PM: Adding info for gpio:gpiochip5
device: 'gpiochip416': device_add
PM: Adding info for No Bus:gpiochip416
gpio-phytium-platform PHYT0001:05: Phytium GPIO controller @0x0000000028039000 registered
driver: 'gpio-phytium-platform': driver_bound: bound to device 'PHYT0001:05'
bus: 'platform': really_probe: bound device PHYT0001:05 to driver gpio-phytium-platform
Registering platform device 'PHYT8002:01'. Parent at platform
device: 'PHYT8002:01': device_add
bus: 'platform': add device PHYT8002:01
PM: Adding info for platform:PHYT8002:01
bus: 'platform': driver_probe_device: matched device PHYT8002:01 with driver phytium clock
bus: 'platform': really_probe: probing driver phytium clock with device PHYT8002:01
phytium clock PHYT8002:01: no default pinctrl state
device: 'wakeup12': device_add
driver: 'phytium clock': driver_bound: bound to device 'PHYT8002:01'
bus: 'platform': really_probe: bound device PHYT8002:01 to driver phytium clock
Registering platform device 'PHYT0038:06'. Parent at platform
device: 'PHYT0038:06': device_add
bus: 'platform': add device PHYT0038:06
PM: Adding info for platform:PHYT0038:06
Registering platform device 'PHYT0038:09'. Parent at platform
device: 'PHYT0038:09': device_add
bus: 'platform': add device PHYT0038:09
PM: Adding info for platform:PHYT0038:09
Registering platform device 'PHYT0038:0e'. Parent at platform
device: 'PHYT0038:0e': device_add
bus: 'platform': add device PHYT0038:0e
PM: Adding info for platform:PHYT0038:0e
Registering platform device 'PHYT0038:0f'. Parent at platform
device: 'PHYT0038:0f': device_add
bus: 'platform': add device PHYT0038:0f
PM: Adding info for platform:PHYT0038:0f
Registering platform device 'PHYT0015:00'. Parent at platform
device: 'PHYT0015:00': device_add
bus: 'platform': add device PHYT0015:00
PM: Adding info for platform:PHYT0015:00
Registering platform device 'PHYT0016:01'. Parent at platform
device: 'PHYT0016:01': device_add
bus: 'platform': add device PHYT0016:01
PM: Adding info for platform:PHYT0016:01
Registering platform device 'PHYT8006:00'. Parent at platform
device: 'PHYT8006:00': device_add
bus: 'platform': add device PHYT8006:00
PM: Adding info for platform:PHYT8006:00
Registering platform device 'PHYT0017:00'. Parent at platform
device: 'PHYT0017:00': device_add
bus: 'platform': add device PHYT0017:00
PM: Adding info for platform:PHYT0017:00
Registering platform device 'PHYT0037:00'. Parent at platform
device: 'PHYT0037:00': device_add
bus: 'platform': add device PHYT0037:00
PM: Adding info for platform:PHYT0037:00
Registering platform device 'PHYT0037:01'. Parent at platform
device: 'PHYT0037:01': device_add
bus: 'platform': add device PHYT0037:01
PM: Adding info for platform:PHYT0037:01
Registering platform device 'PHYT0037:02'. Parent at platform
device: 'PHYT0037:02': device_add
bus: 'platform': add device PHYT0037:02
PM: Adding info for platform:PHYT0037:02
Registering platform device 'PHYT0039:00'. Parent at platform
device: 'PHYT0039:00': device_add
bus: 'platform': add device PHYT0039:00
PM: Adding info for platform:PHYT0039:00
Registering platform device 'PHYT0039:01'. Parent at platform
device: 'PHYT0039:01': device_add
bus: 'platform': add device PHYT0039:01
PM: Adding info for platform:PHYT0039:01
Registering platform device 'PHYT0020:00'. Parent at platform
device: 'PHYT0020:00': device_add
bus: 'platform': add device PHYT0020:00
PM: Adding info for platform:PHYT0020:00
Registering platform device 'PHYT0011:00'. Parent at platform
device: 'PHYT0011:00': device_add
bus: 'platform': add device PHYT0011:00
PM: Adding info for platform:PHYT0011:00
Registering platform device 'PHYT0029:00'. Parent at platform
device: 'PHYT0029:00': device_add
bus: 'platform': add device PHYT0029:00
PM: Adding info for platform:PHYT0029:00
Registering platform device 'PHYT0029:01'. Parent at platform
device: 'PHYT0029:01': device_add
bus: 'platform': add device PHYT0029:01
PM: Adding info for platform:PHYT0029:01
Registering platform device 'PHYT8002:02'. Parent at platform
device: 'PHYT8002:02': device_add
bus: 'platform': add device PHYT8002:02
PM: Adding info for platform:PHYT8002:02
bus: 'platform': driver_probe_device: matched device PHYT8002:02 with driver phytium clock
bus: 'platform': really_probe: probing driver phytium clock with device PHYT8002:02
phytium clock PHYT8002:02: no default pinctrl state
device: 'wakeup13': device_add
driver: 'phytium clock': driver_bound: bound to device 'PHYT8002:02'
bus: 'platform': really_probe: bound device PHYT8002:02 to driver phytium clock
Registering platform device 'PHYT0036:02'. Parent at platform
device: 'PHYT0036:02': device_add
bus: 'platform': add device PHYT0036:02
PM: Adding info for platform:PHYT0036:02
Registering platform device 'PHYT0036:03'. Parent at platform
device: 'PHYT0036:03': device_add
bus: 'platform': add device PHYT0036:03
PM: Adding info for platform:PHYT0036:03
Registering platform device 'PHYT8005:00'. Parent at platform
device: 'PHYT8005:00': device_add
bus: 'platform': add device PHYT8005:00
PM: Adding info for platform:PHYT8005:00
Registering platform device 'PHYT0016:02'. Parent at platform
device: 'PHYT0016:02': device_add
bus: 'platform': add device PHYT0016:02
PM: Adding info for platform:PHYT0016:02
ACPI: PCI Interrupt Link [LNKA] (IRQs *36)
ACPI: PCI Interrupt Link [LNKB] (IRQs *37)
ACPI: PCI Interrupt Link [LNKC] (IRQs *38)
ACPI: PCI Interrupt Link [LNKD] (IRQs *39)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: ECAM area [mem 0x40000000-0x4fffffff] reserved by PNP0C02:00
acpi PNP0A08:00: ECAM at [mem 0x40000000-0x4fffffff] for [bus 00-ff]
Remapped I/O 0x0000000050000000 to [io  0x0000-0xefffff window]
device: 'pci0000:00': device_add
PM: Adding info for No Bus:pci0000:00
device: '0000:00': device_add
PM: Adding info for No Bus:0000:00
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x1000000000-0x1fffffffff window]
pci_bus 0000:00: root bus resource [io  0x0000-0xefffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1db7:dc01] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x58000000-0x58000fff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
device: '0000:00:00.0': device_add
bus: 'pci': add device 0000:00:00.0
PM: Adding info for pci:0000:00:00.0
pci 0000:00:02.0: [1db7:dc01] type 01 class 0x060400
pci 0000:00:02.0: reg 0x10: [mem 0x1000000000-0x10000fffff 64bit pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
device: '0000:00:02.0': device_add
bus: 'pci': add device 0000:00:02.0
PM: Adding info for pci:0000:00:02.0
pci 0000:00:03.0: [1db7:dc01] type 01 class 0x060400
pci 0000:00:03.0: reg 0x10: [mem 0x1000100000-0x10001fffff 64bit pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
device: '0000:00:03.0': device_add
bus: 'pci': add device 0000:00:03.0
PM: Adding info for pci:0000:00:03.0
pci 0000:00:04.0: [1db7:dc01] type 01 class 0x060400
pci 0000:00:04.0: reg 0x10: [mem 0x1000200000-0x10002fffff 64bit pref]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
device: '0000:00:04.0': device_add
bus: 'pci': add device 0000:00:04.0
PM: Adding info for pci:0000:00:04.0
device: '0000:01': device_add
PM: Adding info for No Bus:0000:01
device: '0000:02': device_add
PM: Adding info for No Bus:0000:02
device: '0000:03': device_add
PM: Adding info for No Bus:0000:03
device: '0000:04': device_add
PM: Adding info for No Bus:0000:04
pci 0000:00:00.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:03.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:04.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:00.0: BAR 14: assigned [mem 0x58000000-0x581fffff]
pci 0000:00:00.0: BAR 15: assigned [mem 0x1000000000-0x10001fffff 64bit pref]
pci 0000:00:02.0: BAR 0: assigned [mem 0x1000200000-0x10002fffff 64bit pref]
pci 0000:00:02.0: BAR 14: assigned [mem 0x58200000-0x583fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0x1000300000-0x10004fffff 64bit pref]
pci 0000:00:03.0: BAR 0: assigned [mem 0x1000500000-0x10005fffff 64bit pref]
pci 0000:00:03.0: BAR 14: assigned [mem 0x58400000-0x585fffff]
pci 0000:00:03.0: BAR 15: assigned [mem 0x1000600000-0x10007fffff 64bit pref]
pci 0000:00:04.0: BAR 0: assigned [mem 0x1000800000-0x10008fffff 64bit pref]
pci 0000:00:04.0: BAR 14: assigned [mem 0x58600000-0x587fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0x1000900000-0x1000afffff 64bit pref]
pci 0000:00:00.0: BAR 0: assigned [mem 0x58800000-0x58800fff]
pci 0000:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:02.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:03.0: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:04.0: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:00.0:   bridge window [mem 0x58000000-0x581fffff]
pci 0000:00:00.0:   bridge window [mem 0x1000000000-0x10001fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:02.0:   bridge window [mem 0x58200000-0x583fffff]
pci 0000:00:02.0:   bridge window [mem 0x1000300000-0x10004fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:03.0:   bridge window [mem 0x58400000-0x585fffff]
pci 0000:00:03.0:   bridge window [mem 0x1000600000-0x10007fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 04]
pci 0000:00:04.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:04.0:   bridge window [mem 0x58600000-0x587fffff]
pci 0000:00:04.0:   bridge window [mem 0x1000900000-0x1000afffff 64bit pref]
pci_bus 0000:00: resource 4 [mem 0x58000000-0x7fffffff window]
pci_bus 0000:00: resource 5 [mem 0x1000000000-0x1fffffffff window]
pci_bus 0000:00: resource 6 [io  0x0000-0xefffff window]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x58000000-0x581fffff]
pci_bus 0000:01: resource 2 [mem 0x1000000000-0x10001fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x58200000-0x583fffff]
pci_bus 0000:02: resource 2 [mem 0x1000300000-0x10004fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0x58400000-0x585fffff]
pci_bus 0000:03: resource 2 [mem 0x1000600000-0x10007fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0x58600000-0x587fffff]
pci_bus 0000:04: resource 2 [mem 0x1000900000-0x1000afffff 64bit pref]
device: 'wakeup14': device_add
bus: 'acpi': add driver ec
bus: 'pnp': registered
bus: 'amba': add driver pl08xdmac
device class 'misc': registering
device class 'tpm': registering
device class 'tpmrm': registering
iommu: Default domain type: Passthrough 
bus: 'platform': add driver phytium-lpc
bus: 'i2c': add driver 88PM860x
bus: 'i2c': add driver stmpe-i2c
bus: 'spi': add driver stmpe-spi
bus: 'i2c': add driver tc3589x
bus: 'i2c': add driver lochnagar
bus: 'i2c': add driver WM8400
bus: 'i2c': add driver wm831x
bus: 'spi': add driver wm831x
bus: 'i2c': add driver wm8350
bus: 'i2c': add driver tps65910
bus: 'i2c': add driver tps80031
bus: 'spi': add driver ezx-pcap
bus: 'i2c': add driver da903x
bus: 'spi': add driver da9052
bus: 'i2c': add driver da9052
bus: 'i2c': add driver lp8788
bus: 'i2c': add driver da9055-pmic
bus: 'i2c': add driver max77843
bus: 'i2c': add driver max8925
bus: 'i2c': add driver max8997
bus: 'i2c': add driver max8998
bus: 'i2c': add driver ab3100
bus: 'i2c': add driver tps6586x
bus: 'i2c': add driver tps65090
bus: 'i2c': add driver aat2870
bus: 'i2c': add driver palmas
bus: 'i2c': add driver rc5t583
bus: 'i2c': add driver as3711
bus: 'nd': registered
device class 'nd': registering
bus: 'nd': add driver nd_bus
bus: 'nd': add driver nvdimm
bus: 'nd': add driver nd_region
bus: 'dax': registered
device class 'ata_link': registering
device class 'ata_port': registering
device class 'ata_device': registering
libata version 3.00 loaded.
device class 'scsi_host': registering
bus: 'scsi': registered
device class 'scsi_device': registering
SCSI subsystem initialized
device: 'vga_arbiter': device_add
PM: Adding info for No Bus:vga_arbiter
vgaarb: loaded
device class 'mdio_bus': registering
bus: 'mdio_bus': registered
bus: 'mdio_bus': add driver Generic Clause 45 PHY
bus: 'mdio_bus': add driver Generic PHY
ACPI: bus type USB registered
bus: 'usb': registered
bus: 'usb': add driver usbfs
usbcore: registered new interface driver usbfs
bus: 'usb': add driver hub
usbcore: registered new interface driver hub
bus: 'usb': add driver usb
usbcore: registered new device driver usb
device class 'udc': registering
device class 'usb_role': registering
bus: 'serio': registered
device class 'input': registering
device class 'rtc': registering
bus: 'platform': add driver i2c_designware
mc: Linux media interface: v0.10
bus: 'media': registered
videodev: Linux video capture interface: v2.00
device class 'video4linux': registering
device class 'dvb': registering
bus: 'cec': registered
device class 'pps': registering
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
device class 'ptp': registering
PTP clock support registered
bus: 'platform': add driver brcmstb-reboot
bus: 'platform': remove driver brcmstb-reboot
driver: 'brcmstb-reboot': driver_release
device class 'power_supply': registering
device class 'hwmon': registering
EDAC MC: Ver: 3.0.0
bus: 'edac': registered
device: 'edac': device_add
PM: Adding info for No Bus:edac
device: 'mc': device_add
bus: 'edac': add device mc
PM: Adding info for edac:mc
bus: 'mmc': registered
device class 'mmc_host': registering
bus: 'sdio': registered
device class 'leds': registering
bus: 'amba': add driver pl320
bus: 'scmi_protocol': registered
Registered efivars operations
Registering platform device 'efi-framebuffer.0'. Parent at platform
device: 'efi-framebuffer.0': device_add
bus: 'platform': add device efi-framebuffer.0
PM: Adding info for platform:efi-framebuffer.0
device: 'ion': device_add
PM: Adding info for No Bus:ion
bus: 'platform': add driver hi6220-stub-clk
bus: 'platform': add driver hi3660-stub-clk
device class 'devfreq': registering
device class 'devfreq-event': registering
bus: 'vme': registered
bus: 'nvmem': registered
device class 'tee': registering
bus: 'tee': registered
device class 'sound': registering
Advanced Linux Sound Architecture Driver Initialized.
bus: 'snd_seq': registered
bus: 'ac97': registered
device class 'net': registering
device: 'lo': device_add
PM: Adding info for No Bus:lo
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
device class 'watchdog': registering
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
Init box entries under sysfs SUCCESS!
Init kysecfs SUCCESS!
bus: 'platform': add driver simple-framebuffer
bus: 'pnp': add driver system
pnp: PnP ACPI init
device: 'pnp0': device_add
PM: Adding info for No Bus:pnp0
device: '00:00': device_add
bus: 'pnp': add device 00:00
PM: Adding info for pnp:00:00
bus: 'pnp': driver_probe_device: matched device 00:00 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:00
system 00:00: no default pinctrl state
system 00:00: [mem 0x40000000-0x4fffffff] could not be reserved
driver: 'system': driver_bound: bound to device '00:00'
bus: 'pnp': really_probe: bound device 00:00 to driver system
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 1 devices
device class 'mem': registering
device: 'mem': device_add
PM: Adding info for No Bus:mem
device: 'null': device_add
PM: Adding info for No Bus:null
device: 'port': device_add
PM: Adding info for No Bus:port
device: 'zero': device_add
PM: Adding info for No Bus:zero
device: 'full': device_add
PM: Adding info for No Bus:full
device: 'random': device_add
PM: Adding info for No Bus:random
device: 'urandom': device_add
PM: Adding info for No Bus:urandom
device: 'kmsg': device_add
PM: Adding info for No Bus:kmsg
device: 'tty': device_add
PM: Adding info for No Bus:tty
device: 'console': device_add
PM: Adding info for No Bus:console
device: 'tty0': device_add
PM: Adding info for No Bus:tty0
device class 'vc': registering
device: 'vcs': device_add
PM: Adding info for No Bus:vcs
device: 'vcsu': device_add
PM: Adding info for No Bus:vcsu
device: 'vcsa': device_add
PM: Adding info for No Bus:vcsa
device: 'vcs1': device_add
PM: Adding info for No Bus:vcs1
device: 'vcsu1': device_add
PM: Adding info for No Bus:vcsu1
device: 'vcsa1': device_add
PM: Adding info for No Bus:vcsa1
device: 'tty1': device_add
PM: Adding info for No Bus:tty1
device: 'tty2': device_add
PM: Adding info for No Bus:tty2
device: 'tty3': device_add
PM: Adding info for No Bus:tty3
device: 'tty4': device_add
PM: Adding info for No Bus:tty4
device: 'tty5': device_add
PM: Adding info for No Bus:tty5
device: 'tty6': device_add
PM: Adding info for No Bus:tty6
device: 'tty7': device_add
PM: Adding info for No Bus:tty7
device: 'tty8': device_add
PM: Adding info for No Bus:tty8
device: 'tty9': device_add
PM: Adding info for No Bus:tty9
device: 'tty10': device_add
PM: Adding info for No Bus:tty10
device: 'tty11': device_add
PM: Adding info for No Bus:tty11
device: 'tty12': device_add
PM: Adding info for No Bus:tty12
device: 'tty13': device_add
PM: Adding info for No Bus:tty13
device: 'tty14': device_add
PM: Adding info for No Bus:tty14
device: 'tty15': device_add
PM: Adding info for No Bus:tty15
device: 'tty16': device_add
PM: Adding info for No Bus:tty16
device: 'tty17': device_add
PM: Adding info for No Bus:tty17
device: 'tty18': device_add
PM: Adding info for No Bus:tty18
device: 'tty19': device_add
PM: Adding info for No Bus:tty19
device: 'tty20': device_add
PM: Adding info for No Bus:tty20
device: 'tty21': device_add
PM: Adding info for No Bus:tty21
device: 'tty22': device_add
PM: Adding info for No Bus:tty22
device: 'tty23': device_add
PM: Adding info for No Bus:tty23
device: 'tty24': device_add
PM: Adding info for No Bus:tty24
device: 'tty25': device_add
PM: Adding info for No Bus:tty25
device: 'tty26': device_add
PM: Adding info for No Bus:tty26
device: 'tty27': device_add
PM: Adding info for No Bus:tty27
device: 'tty28': device_add
PM: Adding info for No Bus:tty28
device: 'tty29': device_add
PM: Adding info for No Bus:tty29
device: 'tty30': device_add
PM: Adding info for No Bus:tty30
device: 'tty31': device_add
PM: Adding info for No Bus:tty31
device: 'tty32': device_add
PM: Adding info for No Bus:tty32
device: 'tty33': device_add
PM: Adding info for No Bus:tty33
device: 'tty34': device_add
PM: Adding info for No Bus:tty34
device: 'tty35': device_add
PM: Adding info for No Bus:tty35
device: 'tty36': device_add
PM: Adding info for No Bus:tty36
device: 'tty37': device_add
PM: Adding info for No Bus:tty37
device: 'tty38': device_add
PM: Adding info for No Bus:tty38
device: 'tty39': device_add
PM: Adding info for No Bus:tty39
device: 'tty40': device_add
PM: Adding info for No Bus:tty40
device: 'tty41': device_add
PM: Adding info for No Bus:tty41
device: 'tty42': device_add
PM: Adding info for No Bus:tty42
device: 'tty43': device_add
PM: Adding info for No Bus:tty43
device: 'tty44': device_add
PM: Adding info for No Bus:tty44
device: 'tty45': device_add
PM: Adding info for No Bus:tty45
device: 'tty46': device_add
PM: Adding info for No Bus:tty46
device: 'tty47': device_add
PM: Adding info for No Bus:tty47
device: 'tty48': device_add
PM: Adding info for No Bus:tty48
device: 'tty49': device_add
PM: Adding info for No Bus:tty49
device: 'tty50': device_add
PM: Adding info for No Bus:tty50
device: 'tty51': device_add
PM: Adding info for No Bus:tty51
device: 'tty52': device_add
PM: Adding info for No Bus:tty52
device: 'tty53': device_add
PM: Adding info for No Bus:tty53
device: 'tty54': device_add
PM: Adding info for No Bus:tty54
device: 'tty55': device_add
PM: Adding info for No Bus:tty55
device: 'tty56': device_add
PM: Adding info for No Bus:tty56
device: 'tty57': device_add
PM: Adding info for No Bus:tty57
device: 'tty58': device_add
PM: Adding info for No Bus:tty58
device: 'tty59': device_add
PM: Adding info for No Bus:tty59
device: 'tty60': device_add
PM: Adding info for No Bus:tty60
device: 'tty61': device_add
PM: Adding info for No Bus:tty61
device: 'tty62': device_add
PM: Adding info for No Bus:tty62
device: 'tty63': device_add
PM: Adding info for No Bus:tty63
device class 'firmware': registering
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
device class 'thermal': registering
device class 'powercap': registering
NET: Registered protocol family 2
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NET: Registered protocol family 44
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 22736K
hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
device: 'snapshot': device_add
PM: Adding info for No Bus:snapshot
bus: 'clocksource': registered
device: 'clocksource': device_add
PM: Adding info for No Bus:clocksource
device: 'clocksource0': device_add
bus: 'clocksource': add device clocksource0
PM: Adding info for clocksource:clocksource0
bus: 'platform': add driver alarmtimer
Registering platform device 'alarmtimer'. Parent at platform
device: 'alarmtimer': device_add
bus: 'platform': add device alarmtimer
PM: Adding info for platform:alarmtimer
bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer
bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer
alarmtimer alarmtimer: no default pinctrl state
driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer'
bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer
bus: 'clockevents': registered
device: 'clockevents': device_add
PM: Adding info for No Bus:clockevents
device: 'clockevent0': device_add
bus: 'clockevents': add device clockevent0
PM: Adding info for clockevents:clockevent0
device: 'clockevent1': device_add
bus: 'clockevents': add device clockevent1
PM: Adding info for clockevents:clockevent1
device: 'clockevent2': device_add
bus: 'clockevents': add device clockevent2
PM: Adding info for clockevents:clockevent2
device: 'clockevent3': device_add
bus: 'clockevents': add device clockevent3
PM: Adding info for clockevents:clockevent3
device: 'broadcast': device_add
bus: 'clockevents': add device broadcast
PM: Adding info for clockevents:broadcast
bus: 'event_source': registered
device: 'armv8_pmuv3_1': device_add
bus: 'event_source': add device armv8_pmuv3_1
PM: Adding info for event_source:armv8_pmuv3_1
device: 'armv8_pmuv3_0': device_add
bus: 'event_source': add device armv8_pmuv3_0
PM: Adding info for event_source:armv8_pmuv3_0
device: 'breakpoint': device_add
bus: 'event_source': add device breakpoint
PM: Adding info for event_source:breakpoint
device: 'software': device_add
bus: 'event_source': add device software
PM: Adding info for event_source:software
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
device: 'ecryptfs': device_add
PM: Adding info for No Bus:ecryptfs
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
device: 'autofs': device_add
PM: Adding info for No Bus:autofs
fuse: init (API version 7.31)
device: 'fuse': device_add
PM: Adding info for No Bus:fuse
fileoops: register fileoops with properties:
fileoops: 	kmsg size : 65536 Bytes
fileoops: registered fileoops as backend for kmsg(Oops,panic_write)
pstore: Registered fileoops as persistent store backend
Key type asymmetric registered
Asymmetric key parser 'x509' registered
device class 'bsg': registering
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed
bus: 'platform': add driver Hisilicon MBIGEN-V2
bus: 'platform': add driver phytium-ixic
bus: 'platform': add driver hisi-lpc
bus: 'platform': add driver brcm-gisb-arb
bus: 'platform': remove driver brcm-gisb-arb
driver: 'brcm-gisb-arb': driver_release
bus: 'platform': add driver simple-pm-bus
device class 'phy': registering
bus: 'platform': add driver xgene-phy
bus: 'platform': add driver pinctrl-ocelot
bus: 'platform': add driver basic-mmio-gpio
bus: 'pci': add driver gpio-phytium-pci
bus: 'platform': add driver gpio_phytium_sgpio
bus: 'platform': add driver ftgpio010-gpio
bus: 'amba': add driver pl061_gpio
bus: 'platform': add driver tps68470-gpio
bus: 'platform': add driver xgene-gpio
bus: 'platform': add driver stmpe-pwm
bus: 'platform': remove driver stmpe-pwm
driver: 'stmpe-pwm': driver_release
bus: 'pci_express': add driver aer
bus: 'pci_express': add driver pcie_pme
bus: 'pci_express': add driver dpc
bus: 'pci_express': add driver pciehp
bus: 'pci': add driver pcieport
bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:00.0
pcieport 0000:00:00.0: no default pinctrl state
pci 0000:00:00.0: Driver pcieport requests probe deferral
pci 0000:00:00.0: Added to deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
pcieport 0000:00:02.0: no default pinctrl state
pci 0000:00:02.0: Driver pcieport requests probe deferral
pci 0000:00:02.0: Added to deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:03.0
pcieport 0000:00:03.0: no default pinctrl state
pci 0000:00:03.0: Driver pcieport requests probe deferral
pci 0000:00:03.0: Added to deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:04.0
pcieport 0000:00:04.0: no default pinctrl state
pci 0000:00:04.0: Driver pcieport requests probe deferral
pci 0000:00:04.0: Added to deferred list
bus: 'pci': add driver shpchp
bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver shpchp
bus: 'pci': really_probe: probing driver shpchp with device 0000:00:00.0
shpchp 0000:00:00.0: no default pinctrl state
pci 0000:00:00.0: Driver shpchp requests probe deferral
bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver shpchp
bus: 'pci': really_probe: probing driver shpchp with device 0000:00:02.0
shpchp 0000:00:02.0: no default pinctrl state
pci 0000:00:02.0: Driver shpchp requests probe deferral
bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver shpchp
bus: 'pci': really_probe: probing driver shpchp with device 0000:00:03.0
shpchp 0000:00:03.0: no default pinctrl state
pci 0000:00:03.0: Driver shpchp requests probe deferral
bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver shpchp
bus: 'pci': really_probe: probing driver shpchp with device 0000:00:04.0
shpchp 0000:00:04.0: no default pinctrl state
pci 0000:00:04.0: Driver shpchp requests probe deferral
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
device class 'pci_epc': registering
bus: 'pci-epf': registered
bus: 'platform': add driver cdns-pcie-host
bus: 'platform': add driver cdns-pcie-ep
bus: 'platform': add driver ftpci100
bus: 'platform': add driver pci-host-generic
bus: 'platform': add driver xilinx-pcie
bus: 'platform': add driver altera-pcie
bus: 'platform': add driver dw-pcie
bus: 'platform': add driver kirin-pcie
bus: 'platform': add driver histb-pcie
bus: 'platform': add driver al-pcie
bus: 'platform': add driver hisi-pcie
bus: 'platform': add driver hisi-pcie-almost-ecam
bus: 'platform': add driver pci_thunder_ecam
bus: 'platform': add driver pci_thunder_pem
bus: 'platform': add driver xgene-pcie
bus: 'platform': add driver generic-bl
bus: 'pci': add driver imsttfb
bus: 'amba': add driver clcd-pl11x
bus: 'pci': add driver asiliantfb
bus: 'platform': add driver efi-framebuffer
bus: 'platform': driver_probe_device: matched device efi-framebuffer.0 with driver efi-framebuffer
bus: 'platform': really_probe: probing driver efi-framebuffer with device efi-framebuffer.0
efi-framebuffer efi-framebuffer.0: no default pinctrl state
efifb pci dev is NULL
efi-framebuffer: probe of efi-framebuffer.0 rejects match -19
bus: 'platform': add driver acpi-ged
bus: 'acpi': add driver ac
bus: 'acpi': add driver button
bus: 'platform': add driver acpi-fan
bus: 'cpu': add driver processor
bus: 'cpu': driver_probe_device: matched device cpu0 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu0
processor cpu0: no default pinctrl state
device: 'cooling_device0': device_add
PM: Adding info for No Bus:cooling_device0
driver: 'processor': driver_bound: bound to device 'cpu0'
bus: 'cpu': really_probe: bound device cpu0 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu1 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu1
processor cpu1: no default pinctrl state
device: 'cooling_device1': device_add
PM: Adding info for No Bus:cooling_device1
driver: 'processor': driver_bound: bound to device 'cpu1'
bus: 'cpu': really_probe: bound device cpu1 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu2 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu2
processor cpu2: no default pinctrl state
device: 'cooling_device2': device_add
PM: Adding info for No Bus:cooling_device2
driver: 'processor': driver_bound: bound to device 'cpu2'
bus: 'cpu': really_probe: bound device cpu2 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu3 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu3
processor cpu3: no default pinctrl state
device: 'cooling_device3': device_add
PM: Adding info for No Bus:cooling_device3
driver: 'processor': driver_bound: bound to device 'cpu3'
bus: 'cpu': really_probe: bound device cpu3 to driver processor
bus: 'acpi': add driver hardware_error_device
bus: 'acpi': add driver battery
EINJ: EINJ table not found.
bus: 'platform': add driver tps68470_pmic_opregion
Registering platform device 'sbsa-gwdt.0'. Parent at platform
device: 'sbsa-gwdt.0': device_add
bus: 'platform': add device sbsa-gwdt.0
PM: Adding info for platform:sbsa-gwdt.0
platform sbsa-gwdt.1: failed to claim resource 0: [mem 0x28004300-0x280052ff]
ACPI GTDT: found 1 SBSA generic Watchdog(s).
bus: 'platform': add driver mv_xor_v2
bus: 'pci': add driver phytium_dmac_pci
bus: 'platform': add driver virtio-mmio
bus: 'pci': add driver virtio-pci
bus: 'virtio': add driver virtio_balloon
device: 'ptmx': device_add
PM: Adding info for No Bus:ptmx
bus: 'pnp': add driver serial
Registering platform device 'serial8250'. Parent at platform
device: 'serial8250': device_add
bus: 'platform': add device serial8250
PM: Adding info for platform:serial8250
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS0': device_add
PM: Adding info for No Bus:ttyS0
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS1': device_add
PM: Adding info for No Bus:ttyS1
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS2': device_add
PM: Adding info for No Bus:ttyS2
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS3': device_add
PM: Adding info for No Bus:ttyS3
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS4': device_add
PM: Adding info for No Bus:ttyS4
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS5': device_add
PM: Adding info for No Bus:ttyS5
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS6': device_add
PM: Adding info for No Bus:ttyS6
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS7': device_add
PM: Adding info for No Bus:ttyS7
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS8': device_add
PM: Adding info for No Bus:ttyS8
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS9': device_add
PM: Adding info for No Bus:ttyS9
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS10': device_add
PM: Adding info for No Bus:ttyS10
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS11': device_add
PM: Adding info for No Bus:ttyS11
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS12': device_add
PM: Adding info for No Bus:ttyS12
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS13': device_add
PM: Adding info for No Bus:ttyS13
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS14': device_add
PM: Adding info for No Bus:ttyS14
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS15': device_add
PM: Adding info for No Bus:ttyS15
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS16': device_add
PM: Adding info for No Bus:ttyS16
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS17': device_add
PM: Adding info for No Bus:ttyS17
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS18': device_add
PM: Adding info for No Bus:ttyS18
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS19': device_add
PM: Adding info for No Bus:ttyS19
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS20': device_add
PM: Adding info for No Bus:ttyS20
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS21': device_add
PM: Adding info for No Bus:ttyS21
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS22': device_add
PM: Adding info for No Bus:ttyS22
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS23': device_add
PM: Adding info for No Bus:ttyS23
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS24': device_add
PM: Adding info for No Bus:ttyS24
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS25': device_add
PM: Adding info for No Bus:ttyS25
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS26': device_add
PM: Adding info for No Bus:ttyS26
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS27': device_add
PM: Adding info for No Bus:ttyS27
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS28': device_add
PM: Adding info for No Bus:ttyS28
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS29': device_add
PM: Adding info for No Bus:ttyS29
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS30': device_add
PM: Adding info for No Bus:ttyS30
device: 'serial0': device_add
bus: 'serial': add device serial0
bus: 'serial': remove device serial0
device: 'ttyS31': device_add
PM: Adding info for No Bus:ttyS31
bus: 'platform': add driver serial8250
bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
bus: 'platform': really_probe: probing driver serial8250 with device serial8250
serial8250 serial8250: no default pinctrl state
driver: 'serial8250': driver_bound: bound to device 'serial8250'
bus: 'platform': really_probe: bound device serial8250 to driver serial8250
bus: 'platform': add driver dw-apb-uart
bus: 'platform': add driver of_serial
device: 'ttyprintk': device_add
PM: Adding info for No Bus:ttyprintk
device class 'virtio-ports': registering
bus: 'virtio': add driver virtio_console
bus: 'virtio': add driver virtio_rproc_serial
device: 'hw_random': device_add
PM: Adding info for No Bus:hw_random
bus: 'tee': add driver optee-rng
bus: 'acpi': add driver tpm_crb
bus: 'platform': add driver arm-smmu
bus: 'platform': add driver arm-smmu-v3
bus: 'platform': driver_probe_device: matched device arm-smmu-v3.0.auto with driver arm-smmu-v3
bus: 'platform': really_probe: probing driver arm-smmu-v3 with device arm-smmu-v3.0.auto
arm-smmu-v3 arm-smmu-v3.0.auto: no default pinctrl state
arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0
arm-smmu-v3 arm-smmu-v3.0.auto: ias 40-bit, oas 40-bit (features 0x00001fbf)
arm-smmu-v3 arm-smmu-v3.0.auto: allocated 65536 entries for cmdq
arm-smmu-v3 arm-smmu-v3.0.auto: allocated 32768 entries for evtq
arm-smmu-v3 arm-smmu-v3.0.auto: allocated 65536 entries for priq
arm-smmu-v3 arm-smmu-v3.0.auto: msi_domain absent - falling back to wired irqs
device: 'smmu3.0x0000000030000000': device_add
PM: Adding info for No Bus:smmu3.0x0000000030000000
driver: 'arm-smmu-v3': driver_bound: bound to device 'arm-smmu-v3.0.auto'
bus: 'platform': really_probe: bound device arm-smmu-v3.0.auto to driver arm-smmu-v3
bus: 'virtio': add driver virtio_iommu
device: 'lightnvm': device_add
PM: Adding info for No Bus:lightnvm
device: 'cache': device_add
device: 'index0': device_add
device: 'index1': device_add
device: 'index2': device_add
device: 'cache': device_add
device: 'index0': device_add
device: 'index1': device_add
device: 'index2': device_add
device: 'cache': device_add
device: 'index0': device_add
device: 'index1': device_add
device: 'index2': device_add
device: 'cache': device_add
device: 'index0': device_add
device: 'index1': device_add
device: 'index2': device_add
device class 'devcoredump': registering
device: 'loop-control': device_add
PM: Adding info for No Bus:loop-control
device: '7:0': device_add
PM: Adding info for No Bus:7:0
device: 'loop0': device_add
PM: Adding info for No Bus:loop0
device: '7:1': device_add
PM: Adding info for No Bus:7:1
device: 'loop1': device_add
PM: Adding info for No Bus:loop1
device: '7:2': device_add
PM: Adding info for No Bus:7:2
device: 'loop2': device_add
PM: Adding info for No Bus:loop2
device: '7:3': device_add
PM: Adding info for No Bus:7:3
device: 'loop3': device_add
PM: Adding info for No Bus:loop3
device: '7:4': device_add
PM: Adding info for No Bus:7:4
device: 'loop4': device_add
PM: Adding info for No Bus:loop4
device: '7:5': device_add
PM: Adding info for No Bus:7:5
device: 'loop5': device_add
PM: Adding info for No Bus:loop5
device: '7:6': device_add
PM: Adding info for No Bus:7:6
device: 'loop6': device_add
PM: Adding info for No Bus:loop6
device: '7:7': device_add
PM: Adding info for No Bus:7:7
device: 'loop7': device_add
PM: Adding info for No Bus:loop7
loop: module loaded
bus: 'virtio': add driver virtio_blk
bus: 'i2c': add driver at24
bus: 'i2c': add driver htcpld-chip
bus: 'platform': add driver i2c-htcpld
bus: 'platform': remove driver i2c-htcpld
driver: 'i2c-htcpld': driver_release
bus: 'i2c': add driver tps68470
bus: 'i2c': add driver twl
bus: 'platform': add driver twl4030-audio
bus: 'i2c': add driver twl6040
bus: 'i2c': add driver smsc
bus: 'i2c': add driver max77620
bus: 'i2c': add driver adp5520
bus: 'pci': add driver phytium_x100_mfd_i2s
bus: 'pci': add driver phytium_x100_mfd_mmd
device: 'udmabuf': device_add
PM: Adding info for No Bus:udmabuf
device: 'nvme-wq': device_add
bus: 'workqueue': add device nvme-wq
PM: Adding info for workqueue:nvme-wq
device: 'nvme-reset-wq': device_add
bus: 'workqueue': add device nvme-reset-wq
PM: Adding info for workqueue:nvme-reset-wq
device: 'nvme-delete-wq': device_add
bus: 'workqueue': add device nvme-delete-wq
PM: Adding info for workqueue:nvme-delete-wq
device class 'nvme': registering
device class 'nvme-subsystem': registering
bus: 'pci': add driver nvme
bus: 'pci': add driver ahci
bus: 'platform': add driver ahci
bus: 'platform': driver_probe_device: matched device PHYT0020:00 with driver ahci
bus: 'platform': really_probe: probing driver ahci with device PHYT0020:00
ahci PHYT0020:00: no default pinctrl state
device: 'wakeup15': device_add
ahci PHYT0020:00: PHYT0020:00 supply ahci not found, using dummy regulator
devices_kset: Moving PHYT0020:00 to end of list
PM: Moving platform:PHYT0020:00 to end of list
ahci PHYT0020:00: Linked as a consumer to regulator.0
ahci PHYT0020:00: PHYT0020:00 supply phy not found, using dummy regulator
ahci PHYT0020:00: PHYT0020:00 supply target not found, using dummy regulator
ahci PHYT0020:00: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
ahci PHYT0020:00: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst 
device: 'ata1': device_add
PM: Adding info for No Bus:ata1
device: 'ata1': device_add
PM: Adding info for No Bus:ata1
device: 'link1': device_add
PM: Adding info for No Bus:link1
device: 'link1': device_add
PM: Adding info for No Bus:link1
device: 'dev1.0': device_add
PM: Adding info for No Bus:dev1.0
device: 'dev1.0': device_add
PM: Adding info for No Bus:dev1.0
scsi host0: ahci
device: 'host0': device_add
bus: 'scsi': add device host0
PM: Adding info for scsi:host0
device: 'host0': device_add
PM: Adding info for No Bus:host0
ata1: SATA max UDMA/133 mmio [mem 0x31a40000-0x31a41fff] port 0x100 irq 77
driver: 'ahci': driver_bound: bound to device 'PHYT0020:00'
bus: 'platform': really_probe: bound device PHYT0020:00 to driver ahci
bus: 'pci': add driver sata_sil24
bus: 'platform': add driver ahci-ceva
bus: 'platform': add driver xgene-ahci
bus: 'platform': add driver ahci-qoriq
bus: 'platform': add driver pata_platform
bus: 'platform': add driver pata_of_platform
device class 'sas_host': registering
device class 'sas_phy': registering
device class 'sas_port': registering
device class 'sas_device': registering
device class 'sas_end_device': registering
device class 'sas_expander': registering
bus: 'platform': add driver ufshcd-hisi
bus: 'virtio': add driver virtio_scsi
device class 'scsi_disk': registering
bus: 'scsi': add driver sd
bus: 'scsi': add driver sr
device class 'scsi_generic': registering
Registering platform device 'Fixed MDIO bus.0'. Parent at platform
device: 'Fixed MDIO bus.0': device_add
bus: 'platform': add device Fixed MDIO bus.0
PM: Adding info for platform:Fixed MDIO bus.0
device: 'fixed-0': device_add
PM: Adding info for No Bus:fixed-0
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
device: 'tun': device_add
PM: Adding info for No Bus:tun
bus: 'virtio': add driver virtio_net
bus: 'platform': add driver dwc2
bus: 'platform': add driver phytium-otg
bus: 'platform': driver_probe_device: matched device PHYT0037:00 with driver phytium-otg
bus: 'platform': really_probe: probing driver phytium-otg with device PHYT0037:00
phytium-otg PHYT0037:00: no default pinctrl state
device: 'wakeup16': device_add
phytium-otg PHYT0037:00: Phytium Host USB Driver
phytium-otg PHYT0037:00: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Phytium Host USB Driver
usb usb1: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic phytium-hcd
usb usb1: SerialNumber: PHYT0037:00
device: 'usb1': device_add
bus: 'usb': add device usb1
PM: Adding info for usb:usb1
bus: 'usb': driver_probe_device: matched device usb1 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb1
device: '1-0:1.0': device_add
bus: 'usb': add device 1-0:1.0
PM: Adding info for usb:1-0:1.0
bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
hub 1-0:1.0: no default pinctrl state
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
device: 'usb1-port1': device_add
PM: Adding info for No Bus:usb1-port1
driver: 'hub': driver_bound: bound to device '1-0:1.0'
bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb1'
bus: 'usb': really_probe: bound device usb1 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: 'phytium-otg': driver_bound: bound to device 'PHYT0037:00'
bus: 'platform': really_probe: bound device PHYT0037:00 to driver phytium-otg
bus: 'platform': driver_probe_device: matched device PHYT0037:01 with driver phytium-otg
bus: 'platform': really_probe: probing driver phytium-otg with device PHYT0037:01
phytium-otg PHYT0037:01: no default pinctrl state
device: 'wakeup17': device_add
phytium-otg PHYT0037:01: Phytium Host USB Driver
phytium-otg PHYT0037:01: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Phytium Host USB Driver
usb usb2: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic phytium-hcd
usb usb2: SerialNumber: PHYT0037:01
device: 'usb2': device_add
bus: 'usb': add device usb2
PM: Adding info for usb:usb2
bus: 'usb': driver_probe_device: matched device usb2 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb2
device: '2-0:1.0': device_add
bus: 'usb': add device 2-0:1.0
PM: Adding info for usb:2-0:1.0
bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
hub 2-0:1.0: no default pinctrl state
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
device: 'usb2-port1': device_add
PM: Adding info for No Bus:usb2-port1
driver: 'hub': driver_bound: bound to device '2-0:1.0'
bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb2'
bus: 'usb': really_probe: bound device usb2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: 'phytium-otg': driver_bound: bound to device 'PHYT0037:01'
bus: 'platform': really_probe: bound device PHYT0037:01 to driver phytium-otg
bus: 'platform': driver_probe_device: matched device PHYT0037:02 with driver phytium-otg
bus: 'platform': really_probe: probing driver phytium-otg with device PHYT0037:02
phytium-otg PHYT0037:02: no default pinctrl state
device: 'wakeup18': device_add
phytium-otg PHYT0037:02: Phytium Host USB Driver
phytium-otg PHYT0037:02: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Phytium Host USB Driver
usb usb3: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic phytium-hcd
usb usb3: SerialNumber: PHYT0037:02
device: 'usb3': device_add
bus: 'usb': add device usb3
PM: Adding info for usb:usb3
bus: 'usb': driver_probe_device: matched device usb3 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb3
device: '3-0:1.0': device_add
bus: 'usb': add device 3-0:1.0
PM: Adding info for usb:3-0:1.0
bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
hub 3-0:1.0: no default pinctrl state
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
device: 'usb3-port1': device_add
PM: Adding info for No Bus:usb3-port1
driver: 'hub': driver_bound: bound to device '3-0:1.0'
bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb3'
bus: 'usb': really_probe: bound device usb3 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: 'phytium-otg': driver_bound: bound to device 'PHYT0037:02'
bus: 'platform': really_probe: bound device PHYT0037:02 to driver phytium-otg
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
bus: 'pci': add driver ehci-pci
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
bus: 'pci': add driver ohci-pci
uhci_hcd: USB Universal Host Controller Interface driver
bus: 'pci': add driver uhci_hcd
bus: 'pci': add driver xhci_hcd
device: 'mice': device_add
PM: Adding info for No Bus:mice
device: 'psaux': device_add
PM: Adding info for No Bus:psaux
mousedev: PS/2 mouse device common for all mice
bus: 'serio': add driver atkbd
device: 'uinput': device_add
PM: Adding info for No Bus:uinput
Registering platform device 'rtc-efi'. Parent at platform
device: 'rtc-efi': device_add
bus: 'platform': add device rtc-efi
PM: Adding info for platform:rtc-efi
bus: 'i2c': add driver rtc-ds3232
bus: 'spi': add driver ds3234
bus: 'platform': add driver rtc-efi
bus: 'platform': driver_probe_device: matched device rtc-efi with driver rtc-efi
bus: 'platform': really_probe: probing driver rtc-efi with device rtc-efi
rtc-efi rtc-efi: no default pinctrl state
device: 'wakeup19': device_add
device: 'rtc0': device_add
PM: Adding info for No Bus:rtc0
device: 'wakeup20': device_add
rtc-efi rtc-efi: registered as rtc0
rtc-efi rtc-efi: setting system clock to 2024-11-20T05:53:27 UTC (1732082007)
driver: 'rtc-efi': driver_bound: bound to device 'rtc-efi'
bus: 'platform': really_probe: bound device rtc-efi to driver rtc-efi
bus: 'platform': add driver max77686-rtc
bus: 'i2c': add driver smbus_alert
i2c /dev entries driver
device class 'i2c-dev': registering
bus: 'pci': add driver i2c-designware-pci
bus: 'pci': add driver i2c-phytium-pci
bus: 'platform': add driver i2c-phytium-platform
bus: 'platform': driver_probe_device: matched device PHYT0038:06 with driver i2c-phytium-platform
bus: 'platform': really_probe: probing driver i2c-phytium-platform with device PHYT0038:06
i2c-phytium-platform PHYT0038:06: no default pinctrl state
device: 'wakeup21': device_add
device: 'i2c-6': device_add
bus: 'i2c': add device i2c-6
PM: Adding info for i2c:i2c-6
device: 'i2c-6': device_add
PM: Adding info for No Bus:i2c-6
driver: 'i2c-phytium-platform': driver_bound: bound to device 'PHYT0038:06'
bus: 'platform': really_probe: bound device PHYT0038:06 to driver i2c-phytium-platform
bus: 'platform': driver_probe_device: matched device PHYT0038:09 with driver i2c-phytium-platform
bus: 'platform': really_probe: probing driver i2c-phytium-platform with device PHYT0038:09
i2c-phytium-platform PHYT0038:09: no default pinctrl state
device: 'wakeup22': device_add
device: 'i2c-9': device_add
bus: 'i2c': add device i2c-9
PM: Adding info for i2c:i2c-9
device: 'i2c-9': device_add
PM: Adding info for No Bus:i2c-9
driver: 'i2c-phytium-platform': driver_bound: bound to device 'PHYT0038:09'
bus: 'platform': really_probe: bound device PHYT0038:09 to driver i2c-phytium-platform
bus: 'platform': driver_probe_device: matched device PHYT0038:0e with driver i2c-phytium-platform
bus: 'platform': really_probe: probing driver i2c-phytium-platform with device PHYT0038:0e
i2c-phytium-platform PHYT0038:0e: no default pinctrl state
device: 'wakeup23': device_add
device: 'i2c-14': device_add
bus: 'i2c': add device i2c-14
PM: Adding info for i2c:i2c-14
device: 'i2c-14': device_add
PM: Adding info for No Bus:i2c-14
device: 'i2c-ESSX8336:00': device_add
bus: 'i2c': add device i2c-ESSX8336:00
PM: Adding info for i2c:i2c-ESSX8336:00
driver: 'i2c-phytium-platform': driver_bound: bound to device 'PHYT0038:0e'
bus: 'platform': really_probe: bound device PHYT0038:0e to driver i2c-phytium-platform
bus: 'platform': driver_probe_device: matched device PHYT0038:0f with driver i2c-phytium-platform
bus: 'platform': really_probe: probing driver i2c-phytium-platform with device PHYT0038:0f
i2c-phytium-platform PHYT0038:0f: no default pinctrl state
device: 'wakeup24': device_add
device: 'i2c-15': device_add
bus: 'i2c': add device i2c-15
PM: Adding info for i2c:i2c-15
device: 'i2c-15': device_add
PM: Adding info for No Bus:i2c-15
driver: 'i2c-phytium-platform': driver_bound: bound to device 'PHYT0038:0f'
bus: 'platform': really_probe: bound device PHYT0038:0f to driver i2c-phytium-platform
bus: 'platform': add driver rk3x-i2c
bus: 'platform': add driver as3722-power-off
bus: 'platform': add driver poweroff-gpio
bus: 'platform': add driver restart-gpio
bus: 'platform': add driver hisi-reboot
bus: 'platform': add driver ltc2952-poweroff
bus: 'platform': add driver poweroff-restart
bus: 'platform': add driver vexpress-reset
bus: 'platform': add driver xgene-reboot
bus: 'platform': add driver syscon-reboot
bus: 'platform': add driver syscon-poweroff
bus: 'platform': add driver syscon-reboot-mode
bus: 'platform': add driver scpi-hwmon
device-mapper: uevent: version 1.0.3
device: 'device-mapper': device_add
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
bus: 'mmc_rpmb': registered
bus: 'mmc': add driver mmcblk
bus: 'amba': add driver mmci-pl18x
bus: 'spi': add driver mmc_spi
bus: 'platform': add driver sdci-phytium
bus: 'platform': add driver phytium-mci-platform
bus: 'platform': driver_probe_device: matched device PHYT0017:00 with driver phytium-mci-platform
bus: 'platform': really_probe: probing driver phytium-mci-platform with device PHYT0017:00
phytium-mci-platform PHYT0017:00: no default pinctrl state
device: 'wakeup25': device_add
phytium-mci-platform PHYT0017:00: init hardware done!
device: 'mmc0': device_add
PM: Adding info for No Bus:mmc0
phytium-mci-platform PHYT0017:00: phytium_mci_probe 94: probe phytium mci successful.
driver: 'phytium-mci-platform': driver_bound: bound to device 'PHYT0017:00'
bus: 'platform': really_probe: bound device PHYT0017:00 to driver phytium-mci-platform
bus: 'platform': add driver leds-syscon
ledtrig-cpu: registered to indicate activity on CPUs
bus: 'platform': add driver mhu-acpi
bus: 'platform': add driver platform-mhu
bus: 'platform': add driver scpi_protocol
bus: 'platform': add driver scpi_power_domain
bus: 'platform': add driver arm-scmi
EFI Variables Facility v0.08 2004-May-17
device: 'ashmem': device_add
PM: Adding info for No Bus:ashmem
ashmem: initialized
bus: 'platform': add driver inspur-laptop
bus: 'platform': add driver rongda-laptop
bus: 'platform': add driver casic-laptop
bus: 'platform': add driver changcheng-laptop
bus: 'platform': add driver czc-laptop
bus: 'platform': add driver bitland-laptop
bus: 'platform': add driver lenovo-sensors
bus: 'platform': add driver bitland-sensors
bus: 'pnp': add driver tcm_tis
bus: 'platform': add driver phytium-ec-bl
bus: 'platform': add driver of_fixed_factor_clk
bus: 'platform': add driver of_fixed_clk
bus: 'platform': add driver gpio-clk
bus: 'platform': add driver of_fixed_mmio_clk
bus: 'platform': add driver hsdk-gp-pll-clock
bus: 'platform': add driver scpi_clocks
bus: 'platform': add driver cpufreq-dt
bus: 'platform': add driver scpi-cpufreq
device class 'remoteproc': registering
device class 'extcon': registering
bus: 'platform': add driver ARM-CCI PMU
bus: 'platform': add driver arm-ccn
bus: 'platform': add driver hisi_l3c_pmu
bus: 'platform': add driver hisi_hha_pmu
bus: 'platform': add driver hisi_ddrc_pmu
device: 'binder': device_add
PM: Adding info for No Bus:binder
device: 'hwbinder': device_add
PM: Adding info for No Bus:hwbinder
device: 'vndbinder': device_add
PM: Adding info for No Bus:vndbinder
bus: 'platform': add driver optee
device: 'timer': device_add
PM: Adding info for No Bus:timer
bus: 'usb': add driver snd_usb_toneport
usbcore: registered new interface driver snd_usb_toneport
Registering platform device 'snd-soc-dummy'. Parent at platform
device: 'snd-soc-dummy': device_add
bus: 'platform': add device snd-soc-dummy
PM: Adding info for platform:snd-soc-dummy
bus: 'platform': add driver snd-soc-dummy
bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummy
bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy
snd-soc-dummy snd-soc-dummy: no default pinctrl state
driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy'
bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy
bus: 'platform': add driver soc-audio
bus: 'i2c': add driver es8336
bus: 'i2c': driver_probe_device: matched device i2c-ESSX8336:00 with driver es8336
bus: 'i2c': really_probe: probing driver es8336 with device i2c-ESSX8336:00
es8336 i2c-ESSX8336:00: no default pinctrl state
device: 'wakeup26': device_add
es8336 i2c-ESSX8336:00: Can not get spk_ctl_gpio
driver: 'es8336': driver_bound: bound to device 'i2c-ESSX8336:00'
bus: 'i2c': really_probe: bound device i2c-ESSX8336:00 to driver es8336
bus: 'i2c': add driver es8388
bus: 'platform': add driver phytium-i2s
bus: 'platform': driver_probe_device: matched device PHYT0016:01 with driver phytium-i2s
bus: 'platform': really_probe: probing driver phytium-i2s with device PHYT0016:01
phytium-i2s PHYT0016:01: no default pinctrl state
device: 'wakeup27': device_add
driver: 'phytium-i2s': driver_bound: bound to device 'PHYT0016:01'
bus: 'platform': really_probe: bound device PHYT0016:01 to driver phytium-i2s
bus: 'platform': driver_probe_device: matched device PHYT0016:02 with driver phytium-i2s
bus: 'platform': really_probe: probing driver phytium-i2s with device PHYT0016:02
phytium-i2s PHYT0016:02: no default pinctrl state
device: 'wakeup28': device_add
driver: 'phytium-i2s': driver_bound: bound to device 'PHYT0016:02'
bus: 'platform': really_probe: bound device PHYT0016:02 to driver phytium-i2s
bus: 'platform': add driver pmdk_es8336
bus: 'platform': driver_probe_device: matched device PHYT8005:00 with driver pmdk_es8336
bus: 'platform': really_probe: probing driver pmdk_es8336 with device PHYT8005:00
pmdk_es8336 PHYT8005:00: no default pinctrl state
device: 'wakeup29': device_add
pmdk_es8336 PHYT8005:00: get card-name failed, use default 
pmdk_es8336 PHYT8005:00: pmdk_set_jk_value: dmic-exist 0,headphone-exist 1, speaker-exist 1, headset-mic 2 , internal-mic 0 
phytium-mci-platform PHYT0017:00: exceeding card's volts
mmc0: Voltage range not supported for power class
mmc0: power class selection to bus width 8 ddr 0 failed
mmc0: new high speed MMC card at address 0001
device: 'mmc0:0001': device_add
bus: 'mmc': add device mmc0:0001
PM: Adding info for mmc:mmc0:0001
bus: 'mmc': driver_probe_device: matched device mmc0:0001 with driver mmcblk
bus: 'mmc': really_probe: probing driver mmcblk with device mmc0:0001
mmcblk mmc0:0001: no default pinctrl state
mmcblk0: mmc0:0001 A3A55B 28.9 GiB 
mmcblk0boot0: mmc0:0001 A3A55B partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 A3A55B partition 2 4.00 MiB
device: 'mmcblk0rpmb': device_add
bus: 'mmc_rpmb': add device mmcblk0rpmb
PM: Adding info for mmc_rpmb:mmcblk0rpmb
mmcblk0rpmb: mmc0:0001 A3A55B partition 3 16.0 MiB, chardev (240:0)
device: '179:0': device_add
PM: Adding info for No Bus:179:0
device: 'mmcblk0': device_add
PM: Adding info for No Bus:mmcblk0
 mmcblk0: p1 p2 p3
device: 'mmcblk0p1': device_add
PM: Adding info for No Bus:mmcblk0p1
device: 'mmcblk0p2': device_add
PM: Adding info for No Bus:mmcblk0p2
device: 'mmcblk0p3': device_add
PM: Adding info for No Bus:mmcblk0p3
blk_init ok, step 10, over 30
device: '179:16': device_add
PM: Adding info for No Bus:179:16
device: 'mmcblk0boot1': device_add
PM: Adding info for No Bus:mmcblk0boot1
blk_init ok, step 10, over 30
device: '179:8': device_add
PM: Adding info for No Bus:179:8
device: 'mmcblk0boot0': device_add
PM: Adding info for No Bus:mmcblk0boot0
blk_init ok, step 10, over 30
driver: 'mmcblk': driver_bound: bound to device 'mmc0:0001'
bus: 'mmc': really_probe: bound device mmc0:0001 to driver mmcblk
blk load period jiffies over
blk load period jiffies over
blk load period jiffies over
pmdk_es8336 PHYT8005:00: ASoC: DAPM unknown pin Speaker Phantom
pmdk_es8336 PHYT8005:00: ASoC: DAPM unknown pin Speaker Phantom
device: 'ES8336 HIFI': device_add
PM: Adding info for No Bus:ES8336 HIFI
pmdk_es8336 PHYT8005:00: i2c-ESSX8336:00  PHYT0016:02 mapping ok
debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
device: 'card0': device_add
PM: Adding info for No Bus:card0
device: 'pcmC0D0p': device_add
PM: Adding info for No Bus:pcmC0D0p
device: 'pcmC0D0c': device_add
PM: Adding info for No Bus:pcmC0D0c
device: 'dsp': device_add
PM: Adding info for No Bus:dsp
device: 'audio': device_add
PM: Adding info for No Bus:audio
device: 'input0': device_add
PM: Adding info for No Bus:input0
input: PMDK-I2S Headset as /devices/platform/PHYT8005:00/sound/card0/input0
device: 'event0': device_add
PM: Adding info for No Bus:event0
device: 'input1': device_add
PM: Adding info for No Bus:input1
input: PMDK-I2S Speaker as /devices/platform/PHYT8005:00/sound/card0/input1
device: 'event1': device_add
PM: Adding info for No Bus:event1
device: 'controlC0': device_add
PM: Adding info for No Bus:controlC0
device: 'mixer': device_add
PM: Adding info for No Bus:mixer
driver: 'pmdk_es8336': driver_bound: bound to device 'PHYT8005:00'
bus: 'platform': really_probe: bound device PHYT8005:00 to driver pmdk_es8336
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
NET: Registered protocol family 17
Key type dns_resolver registered
device: 'cpu_dma_latency': device_add
PM: Adding info for No Bus:cpu_dma_latency
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f687adf1de7c2cbaa38e7a05220f45c12fd088b0'
zswap: loaded using pool lz4/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
ata1: SATA link down (SStatus 0 SControl 300)
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
devices_kset: Moving 0000:00:00.0 to end of list
PM: Moving pci:0000:00:00.0 to end of list
devices_kset: Moving 0000:01 to end of list
PM: Moving No Bus:0000:01 to end of list
pci 0000:00:00.0: Retrying from deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:00.0
pcieport 0000:00:00.0: no default pinctrl state
pcieport 0000:00:00.0: Adding to iommu group 0
PCI Interrupt Link [LNKA] enabled at IRQ 36
device: '0000:00:00.0:pcie010': device_add
bus: 'pci_express': add device 0000:00:00.0:pcie010
PM: Adding info for pci_express:0000:00:00.0:pcie010
driver: 'pcieport': driver_bound: bound to device '0000:00:00.0'
bus: 'pci': really_probe: bound device 0000:00:00.0 to driver pcieport
devices_kset: Moving 0000:00:02.0 to end of list
PM: Moving pci:0000:00:02.0 to end of list
devices_kset: Moving 0000:02 to end of list
PM: Moving No Bus:0000:02 to end of list
pci 0000:00:02.0: Retrying from deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
pcieport 0000:00:02.0: no default pinctrl state
pcieport 0000:00:02.0: Adding to iommu group 1
device: '0000:00:02.0:pcie010': device_add
bus: 'pci_express': add device 0000:00:02.0:pcie010
PM: Adding info for pci_express:0000:00:02.0:pcie010
driver: 'pcieport': driver_bound: bound to device '0000:00:02.0'
bus: 'pci': really_probe: bound device 0000:00:02.0 to driver pcieport
devices_kset: Moving 0000:00:03.0 to end of list
PM: Moving pci:0000:00:03.0 to end of list
devices_kset: Moving 0000:03 to end of list
PM: Moving No Bus:0000:03 to end of list
pci 0000:00:03.0: Retrying from deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:03.0
pcieport 0000:00:03.0: no default pinctrl state
pcieport 0000:00:03.0: Adding to iommu group 2
device: '0000:00:03.0:pcie010': device_add
bus: 'pci_express': add device 0000:00:03.0:pcie010
PM: Adding info for pci_express:0000:00:03.0:pcie010
driver: 'pcieport': driver_bound: bound to device '0000:00:03.0'
bus: 'pci': really_probe: bound device 0000:00:03.0 to driver pcieport
devices_kset: Moving 0000:00:04.0 to end of list
PM: Moving pci:0000:00:04.0 to end of list
devices_kset: Moving 0000:04 to end of list
PM: Moving No Bus:0000:04 to end of list
pci 0000:00:04.0: Retrying from deferred list
bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:04.0
pcieport 0000:00:04.0: no default pinctrl state
pcieport 0000:00:04.0: Adding to iommu group 3
device: '0000:00:04.0:pcie010': device_add
bus: 'pci_express': add device 0000:00:04.0:pcie010
PM: Adding info for pci_express:0000:00:04.0:pcie010
driver: 'pcieport': driver_bound: bound to device '0000:00:04.0'
bus: 'pci': really_probe: bound device 0000:00:04.0 to driver pcieport
bus: 'platform': add driver charger-manager
ALSA device list:
  #0: anntec.cn-S_E2004-NotSet-S_E2004
Freeing unused kernel memory: 768K
Run /init as init process
bus: 'platform': add driver xhci-hcd
bus: 'platform': driver_probe_device: matched device PHYT0039:00 with driver xhci-hcd
bus: 'platform': really_probe: probing driver xhci-hcd with device PHYT0039:00
xhci-hcd PHYT0039:00: no default pinctrl state
device: 'wakeup30': device_add
xhci-hcd PHYT0039:00: xHCI Host Controller
xhci-hcd PHYT0039:00: new USB bus registered, assigned bus number 4
xhci-hcd PHYT0039:00: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000010090
xhci-hcd PHYT0039:00: irq 75, io mem 0x31a08000
xhci-hcd PHYT0039:00: xHCI Host Controller
xhci-hcd PHYT0039:00: new USB bus registered, assigned bus number 5
xhci-hcd PHYT0039:00: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic xhci-hcd
usb usb4: SerialNumber: PHYT0039:00
device: 'usb4': device_add
bus: 'usb': add device usb4
PM: Adding info for usb:usb4
bus: 'usb': driver_probe_device: matched device usb4 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb4
device: '4-0:1.0': device_add
bus: 'usb': add device 4-0:1.0
PM: Adding info for usb:4-0:1.0
bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 4-0:1.0
hub 4-0:1.0: no default pinctrl state
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
device: 'usb4-port1': device_add
PM: Adding info for No Bus:usb4-port1
driver: 'hub': driver_bound: bound to device '4-0:1.0'
bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb4'
bus: 'usb': really_probe: bound device usb4 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic xhci-hcd
usb usb5: SerialNumber: PHYT0039:00
device: 'usb5': device_add
bus: 'usb': add device usb5
PM: Adding info for usb:usb5
bus: 'usb': driver_probe_device: matched device usb5 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb5
device: '5-0:1.0': device_add
bus: 'usb': add device 5-0:1.0
PM: Adding info for usb:5-0:1.0
bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 5-0:1.0
hub 5-0:1.0: no default pinctrl state
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
device: 'usb5-port1': device_add
PM: Adding info for No Bus:usb5-port1
driver: 'hub': driver_bound: bound to device '5-0:1.0'
bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb5'
bus: 'usb': really_probe: bound device usb5 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: 'xhci-hcd': driver_bound: bound to device 'PHYT0039:00'
bus: 'platform': really_probe: bound device PHYT0039:00 to driver xhci-hcd
bus: 'platform': driver_probe_device: matched device PHYT0039:01 with driver xhci-hcd
bus: 'platform': really_probe: probing driver xhci-hcd with device PHYT0039:01
xhci-hcd PHYT0039:01: no default pinctrl state
device: 'wakeup31': device_add
xhci-hcd PHYT0039:01: xHCI Host Controller
xhci-hcd PHYT0039:01: new USB bus registered, assigned bus number 6
xhci-hcd PHYT0039:01: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000010090
xhci-hcd PHYT0039:01: irq 76, io mem 0x31a28000
xhci-hcd PHYT0039:01: xHCI Host Controller
xhci-hcd PHYT0039:01: new USB bus registered, assigned bus number 7
xhci-hcd PHYT0039:01: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic xhci-hcd
usb usb6: SerialNumber: PHYT0039:01
device: 'usb6': device_add
bus: 'usb': add device usb6
PM: Adding info for usb:usb6
bus: 'usb': driver_probe_device: matched device usb6 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb6
device: '6-0:1.0': device_add
bus: 'usb': add device 6-0:1.0
PM: Adding info for usb:6-0:1.0
bus: 'usb': driver_probe_device: matched device 6-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 6-0:1.0
hub 6-0:1.0: no default pinctrl state
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
device: 'usb6-port1': device_add
PM: Adding info for No Bus:usb6-port1
driver: 'hub': driver_bound: bound to device '6-0:1.0'
bus: 'usb': really_probe: bound device 6-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb6'
bus: 'usb': really_probe: bound device usb6 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.4.18-63.52-e2000-rc17-20230601-generic xhci-hcd
usb usb7: SerialNumber: PHYT0039:01
device: 'usb7': device_add
bus: 'usb': add device usb7
PM: Adding info for usb:usb7
bus: 'usb': driver_probe_device: matched device usb7 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb7
device: '7-0:1.0': device_add
bus: 'usb': add device 7-0:1.0
PM: Adding info for usb:7-0:1.0
bus: 'usb': driver_probe_device: matched device 7-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 7-0:1.0
hub 7-0:1.0: no default pinctrl state
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
device: 'usb7-port1': device_add
PM: Adding info for No Bus:usb7-port1
driver: 'hub': driver_bound: bound to device '7-0:1.0'
bus: 'usb': really_probe: bound device 7-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device 'usb7'
bus: 'usb': really_probe: bound device usb7 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: 'xhci-hcd': driver_bound: bound to device 'PHYT0039:01'
bus: 'platform': really_probe: bound device PHYT0039:01 to driver xhci-hcd
device class 'drm': registering
device class 'drm_dp_aux_dev': registering
bus: 'platform': add driver phytium_display_platform
bus: 'platform': driver_probe_device: matched device PHYT0015:00 with driver phytium_display_platform
bus: 'platform': really_probe: probing driver phytium_display_platform with device PHYT0015:00
phytium_display_platform PHYT0015:00: no default pinctrl state
device: 'wakeup32': device_add
device: 'card0': device_add
PM: Adding info for No Bus:card0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Registering platform device 'hdmi-audio-codec.1346918656'. Parent at PHYT0015:00
device: 'hdmi-audio-codec.1346918656': device_add
bus: 'platform': add device hdmi-audio-codec.1346918656
PM: Adding info for platform:hdmi-audio-codec.1346918656
device: 'card0-DP-1': device_add
PM: Adding info for No Bus:card0-DP-1
Registering platform device 'hdmi-audio-codec.1346918657'. Parent at PHYT0015:00
device: 'hdmi-audio-codec.1346918657': device_add
bus: 'platform': add device hdmi-audio-codec.1346918657
PM: Adding info for platform:hdmi-audio-codec.1346918657
device: 'card0-DP-2': device_add
PM: Adding info for No Bus:card0-DP-2
[drm] Cannot find any crtc or sizes
[drm] Initialized dc 1.1.0 20201220 for PHYT0015:00 on minor 0
random: fast init done
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
device: 'fb0': device_add
PM: Adding info for No Bus:fb0
fbcon: Deferring console take-over
phytium_display_platform PHYT0015:00: fb0: dcdrmfb frame buffer device
driver: 'phytium_display_platform': driver_bound: bound to device 'PHYT0015:00'
bus: 'platform': really_probe: bound device PHYT0015:00 to driver phytium_display_platform
bus: 'pci': add driver phytium_display_pci
usb 4-1: new high-speed USB device number 2 using xhci-hcd
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB2.1 Hub
usb 4-1: Manufacturer: GenesysLogic
device: '4-1': device_add
bus: 'usb': add device 4-1
PM: Adding info for usb:4-1
bus: 'usb': driver_probe_device: matched device 4-1 with driver usb
bus: 'usb': really_probe: probing driver usb with device 4-1
usb 4-1: no default pinctrl state
device: '4-1:1.0': device_add
bus: 'usb': add device 4-1:1.0
PM: Adding info for usb:4-1:1.0
bus: 'usb': driver_probe_device: matched device 4-1:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 4-1:1.0
hub 4-1:1.0: no default pinctrl state
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
device: '4-1-port1': device_add
PM: Adding info for No Bus:4-1-port1
device: '4-1-port2': device_add
PM: Adding info for No Bus:4-1-port2
device: '4-1-port3': device_add
PM: Adding info for No Bus:4-1-port3
device: '4-1-port4': device_add
PM: Adding info for No Bus:4-1-port4
driver: 'hub': driver_bound: bound to device '4-1:1.0'
bus: 'usb': really_probe: bound device 4-1:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device '4-1'
bus: 'usb': really_probe: bound device 4-1 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
usb 4-1.2: new low-speed USB device number 3 using xhci-hcd
systemd[1]: systemd 245.4-4kylin3.11k33 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
usb 4-1.2: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.50
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.2: Product: USB Keyboard
usb 4-1.2: Manufacturer: SIGMACHIP
device: '4-1.2': device_add
bus: 'usb': add device 4-1.2
PM: Adding info for usb:4-1.2
bus: 'usb': driver_probe_device: matched device 4-1.2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 4-1.2
usb 4-1.2: no default pinctrl state
device: '4-1.2:1.0': device_add
bus: 'usb': add device 4-1.2:1.0
PM: Adding info for usb:4-1.2:1.0
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
device: '4-1.2:1.1': device_add
bus: 'usb': add device 4-1.2:1.1
PM: Adding info for usb:4-1.2:1.1
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
driver: 'usb': driver_bound: bound to device '4-1.2'
bus: 'usb': really_probe: bound device 4-1.2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
systemd[1]: Set hostname to .
usb 4-1.3: new high-speed USB device number 4 using xhci-hcd
usb 4-1.3: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 2.00
usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.3: Product: Disk 2.0
usb 4-1.3: Manufacturer: USB
usb 4-1.3: SerialNumber: 0963221026158386052
device: '4-1.3': device_add
bus: 'usb': add device 4-1.3
PM: Adding info for usb:4-1.3
bus: 'usb': driver_probe_device: matched device 4-1.3 with driver usb
bus: 'usb': really_probe: probing driver usb with device 4-1.3
usb 4-1.3: no default pinctrl state
device: '4-1.3:1.0': device_add
bus: 'usb': add device 4-1.3:1.0
PM: Adding info for usb:4-1.3:1.0
device: 'ep_01': device_add
PM: Adding info for No Bus:ep_01
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
driver: 'usb': driver_bound: bound to device '4-1.3'
bus: 'usb': really_probe: bound device 4-1.3 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
usb 4-1.4: new low-speed USB device number 5 using xhci-hcd
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
systemd[1]: Finished Load Kernel Modules.
device: 'vcs2': device_add
PM: Adding info for No Bus:vcs2
device: 'vcsu2': device_add
PM: Adding info for No Bus:vcsu2
device: 'vcsa2': device_add
PM: Adding info for No Bus:vcsa2
device: 'vcs3': device_add
PM: Adding info for No Bus:vcs3
device: 'vcsu3': device_add
PM: Adding info for No Bus:vcsu3
device: 'vcsa3': device_add
PM: Adding info for No Bus:vcsa3
device: 'vcs4': device_add
PM: Adding info for No Bus:vcs4
device: 'vcsu4': device_add
PM: Adding info for No Bus:vcsu4
device: 'vcsa4': device_add
PM: Adding info for No Bus:vcsa4
device: 'vcs5': device_add
PM: Adding info for No Bus:vcs5
device: 'vcsu5': device_add
PM: Adding info for No Bus:vcsu5
device: 'vcsa5': device_add
PM: Adding info for No Bus:vcsa5
systemd[1]: Mounting FUSE Control File System...
usb 4-1.4: New USB device found, idVendor=17ef, idProduct=6050, bcdDevice= 0.09
usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1.4: Product: Lenovo Precision USB Mouse
device: '4-1.4': device_add
bus: 'usb': add device 4-1.4
PM: Adding info for usb:4-1.4
bus: 'usb': driver_probe_device: matched device 4-1.4 with driver usb
bus: 'usb': really_probe: probing driver usb with device 4-1.4
usb 4-1.4: no default pinctrl state
device: '4-1.4:1.0': device_add
bus: 'usb': add device 4-1.4:1.0
PM: Adding info for usb:4-1.4:1.0
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb': driver_bound: bound to device '4-1.4'
bus: 'usb': really_probe: bound device 4-1.4 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
systemd[1]: Mounting Kernel Configuration File System...
device: 'vcs6': device_add
PM: Adding info for No Bus:vcs6
device: 'vcsu6': device_add
PM: Adding info for No Bus:vcsu6
device: 'vcsa6': device_add
PM: Adding info for No Bus:vcsa6
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Started Journal Service.
bus: 'hid': registered
device class 'hidraw': registering
hidraw: raw HID events driver (C) Jiri Kosina
bus: 'usb': add driver usbhid
bus: 'usb': driver_probe_device: matched device 4-1.2:1.0 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 4-1.2:1.0
usbhid 4-1.2:1.0: no default pinctrl state
device: '0003:1C4F:0002.0001': device_add
bus: 'hid': add device 0003:1C4F:0002.0001
PM: Adding info for hid:0003:1C4F:0002.0001
driver: 'usbhid': driver_bound: bound to device '4-1.2:1.0'
bus: 'usb': really_probe: bound device 4-1.2:1.0 to driver usbhid
bus: 'usb': driver_probe_device: matched device 4-1.2:1.1 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 4-1.2:1.1
usbhid 4-1.2:1.1: no default pinctrl state
device: '0003:1C4F:0002.0002': device_add
bus: 'hid': add device 0003:1C4F:0002.0002
PM: Adding info for hid:0003:1C4F:0002.0002
driver: 'usbhid': driver_bound: bound to device '4-1.2:1.1'
bus: 'usb': really_probe: bound device 4-1.2:1.1 to driver usbhid
bus: 'usb': driver_probe_device: matched device 4-1.4:1.0 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 4-1.4:1.0
usbhid 4-1.4:1.0: no default pinctrl state
device: '0003:17EF:6050.0003': device_add
bus: 'hid': add device 0003:17EF:6050.0003
PM: Adding info for hid:0003:17EF:6050.0003
driver: 'usbhid': driver_bound: bound to device '4-1.4:1.0'
bus: 'usb': really_probe: bound device 4-1.4:1.0 to driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device: 'wakeup33': device_add
bus: 'acpi': add driver thermal
bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal
bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00
thermal LNXTHERM:00: no default pinctrl state
bus: 'platform': add driver hdmi-audio-codec
bus: 'platform': driver_probe_device: matched device hdmi-audio-codec.1346918656 with driver hdmi-audio-codec
bus: 'platform': really_probe: probing driver hdmi-audio-codec with device hdmi-audio-codec.1346918656
hdmi-audio-codec hdmi-audio-codec.1346918656: no default pinctrl state
driver: 'hdmi-audio-codec': driver_bound: bound to device 'hdmi-audio-codec.1346918656'
bus: 'platform': really_probe: bound device hdmi-audio-codec.1346918656 to driver hdmi-audio-codec
bus: 'platform': driver_probe_device: matched device hdmi-audio-codec.1346918657 with driver hdmi-audio-codec
bus: 'platform': really_probe: probing driver hdmi-audio-codec with device hdmi-audio-codec.1346918657
hdmi-audio-codec hdmi-audio-codec.1346918657: no default pinctrl state
driver: 'hdmi-audio-codec': driver_bound: bound to device 'hdmi-audio-codec.1346918657'
bus: 'platform': really_probe: bound device hdmi-audio-codec.1346918657 to driver hdmi-audio-codec
device: 'thermal_zone0': device_add
PM: Adding info for No Bus:thermal_zone0
device: 'hwmon0': device_add
PM: Adding info for No Bus:hwmon0
bus: 'platform': add driver pmdk_dp
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup34': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
bus: 'platform': add driver macb
bus: 'platform': driver_probe_device: matched device PHYT0036:02 with driver macb
bus: 'platform': really_probe: probing driver macb with device PHYT0036:02
macb PHYT0036:02: no default pinctrl state
device: 'wakeup34': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (93 C)
driver: 'thermal': driver_bound: bound to device 'LNXTHERM:00'
bus: 'acpi': really_probe: bound device LNXTHERM:00 to driver thermal
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup34': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup34': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
device: 'wakeup34': device_add
device: 'PHYT0036:02-ffffffff': device_add
PM: Adding info for No Bus:PHYT0036:02-ffffffff
bus: 'mdio_bus': add driver YT8010 Automotive Ethernet
bus: 'mdio_bus': add driver YT8510 100/10Mb Ethernet
bus: 'mdio_bus': add driver YT8511 Gigabit Ethernet
bus: 'mdio_bus': add driver YT8512 Ethernet
bus: 'mdio_bus': add driver YT8512B Ethernet
bus: 'mdio_bus': add driver YT8521 Ethernet
bus: 'mdio_bus': add driver YT8531S Ethernet
bus: 'mdio_bus': add driver YT8531 Gigabit Ethernet
bus: 'mdio_bus': add driver YT8618 Ethernet
bus: 'mdio_bus': add driver YT8614 Ethernet
bus: 'mdio_bus': add driver YT8821 2.5Gb Ethernet
device: 'PHYT0036:02-ffffffff:00': device_add
bus: 'mdio_bus': add device PHYT0036:02-ffffffff:00
PM: Adding info for mdio_bus:PHYT0036:02-ffffffff:00
bus: 'mdio_bus': driver_probe_device: matched device PHYT0036:02-ffffffff:00 with driver YT8531S Ethernet
bus: 'mdio_bus': really_probe: probing driver YT8531S Ethernet with device PHYT0036:02-ffffffff:00
YT8531S Ethernet PHYT0036:02-ffffffff:00: no default pinctrl state
driver: 'YT8531S Ethernet': driver_bound: bound to device 'PHYT0036:02-ffffffff:00'
bus: 'mdio_bus': really_probe: bound device PHYT0036:02-ffffffff:00 to driver YT8531S Ethernet
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
device: 'PHYT0036:02-ffffffff:03': device_add
bus: 'mdio_bus': add device PHYT0036:02-ffffffff:03
PM: Adding info for mdio_bus:PHYT0036:02-ffffffff:03
bus: 'mdio_bus': driver_probe_device: matched device PHYT0036:02-ffffffff:03 with driver YT8531S Ethernet
bus: 'mdio_bus': really_probe: probing driver YT8531S Ethernet with device PHYT0036:02-ffffffff:03
YT8531S Ethernet PHYT0036:02-ffffffff:03: no default pinctrl state
driver: 'YT8531S Ethernet': driver_bound: bound to device 'PHYT0036:02-ffffffff:03'
bus: 'mdio_bus': really_probe: bound device PHYT0036:02-ffffffff:03 to driver YT8531S Ethernet
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
libphy: MACB_mii_bus: probed
macb PHYT0036:02 (unnamed net_device) (uninitialized): yt8521_config_init done, phy addr: 0, strap mode = 0, polling mode = 2
device: 'eth0': device_add
PM: Adding info for No Bus:eth0
YT8531S Ethernet PHYT0036:02-ffffffff:00: attached PHY driver [YT8531S Ethernet] (mii_bus:phy_addr=PHYT0036:02-ffffffff:00, irq=POLL)
macb PHYT0036:02 eth0: Cadence GEM rev 0x400c010d at 0x32010000 irq 82 (24:dc:0f:56:8d:06)
driver: 'macb': driver_bound: bound to device 'PHYT0036:02'
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
bus: 'platform': really_probe: bound device PHYT0036:02 to driver macb
bus: 'platform': driver_probe_device: matched device PHYT0036:03 with driver macb
bus: 'platform': really_probe: probing driver macb with device PHYT0036:03
macb PHYT0036:03: no default pinctrl state
device: 'wakeup35': device_add
device: 'PHYT0036:03-ffffffff': device_add
PM: Adding info for No Bus:PHYT0036:03-ffffffff
libphy: MACB_mii_bus: probed
macb PHYT0036:03 (unnamed net_device) (uninitialized): no PHY found
PM: Removing info for No Bus:PHYT0036:03-ffffffff
device: 'wakeup36': device_add
device: 'wakeup36': device_unregister
device: 'wakeup36': device_add
bus: 'hid': add driver hid-generic
bus: 'hid': driver_probe_device: matched device 0003:1C4F:0002.0001 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:1C4F:0002.0001
hid-generic 0003:1C4F:0002.0001: no default pinctrl state
device: 'wakeup37': device_add
device: 'wakeup37': device_unregister
device: 'input2': device_add
PM: Adding info for No Bus:input2
input: SIGMACHIP USB Keyboard as /devices/platform/PHYT0039:00/usb4/4-1/4-1.2/4-1.2:1.0/0003:1C4F:0002.0001/input/input2
device: 'wakeup35': device_unregister
macb: probe of PHYT0036:03 rejects match -6
device: 'input2::numlock': device_add
PM: Adding info for No Bus:input2::numlock
device: 'input2::capslock': device_add
PM: Adding info for No Bus:input2::capslock
device: 'input2::scrolllock': device_add
PM: Adding info for No Bus:input2::scrolllock
device: 'event2': device_add
PM: Adding info for No Bus:event2
device: 'hidraw0': device_add
PM: Adding info for No Bus:hidraw0
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-PHYT0039:00-1.2/input0
driver: 'hid-generic': driver_bound: bound to device '0003:1C4F:0002.0001'
bus: 'hid': really_probe: bound device 0003:1C4F:0002.0001 to driver hid-generic
bus: 'hid': driver_probe_device: matched device 0003:1C4F:0002.0002 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:1C4F:0002.0002
hid-generic 0003:1C4F:0002.0002: no default pinctrl state
device: 'input3': device_add
PM: Adding info for No Bus:input3
input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/PHYT0039:00/usb4/4-1/4-1.2/4-1.2:1.1/0003:1C4F:0002.0002/input/input3
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
device: 'event3': device_add
PM: Adding info for No Bus:event3
device: 'input4': device_add
PM: Adding info for No Bus:input4
input: SIGMACHIP USB Keyboard System Control as /devices/platform/PHYT0039:00/usb4/4-1/4-1.2/4-1.2:1.1/0003:1C4F:0002.0002/input/input4
device: 'event4': device_add
PM: Adding info for No Bus:event4
device: 'hidraw1': device_add
PM: Adding info for No Bus:hidraw1
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-PHYT0039:00-1.2/input1
driver: 'hid-generic': driver_bound: bound to device '0003:1C4F:0002.0002'
bus: 'hid': really_probe: bound device 0003:1C4F:0002.0002 to driver hid-generic
bus: 'hid': driver_probe_device: matched device 0003:17EF:6050.0003 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:17EF:6050.0003
hid-generic 0003:17EF:6050.0003: no default pinctrl state
device: 'input5': device_add
PM: Adding info for No Bus:input5
input: Lenovo Precision USB Mouse as /devices/platform/PHYT0039:00/usb4/4-1/4-1.4/4-1.4:1.0/0003:17EF:6050.0003/input/input5
device: 'mouse0': device_add
PM: Adding info for No Bus:mouse0
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
device: 'event5': device_add
PM: Adding info for No Bus:event5
device: 'hidraw2': device_add
PM: Adding info for No Bus:hidraw2
hid-generic 0003:17EF:6050.0003: input,hidraw2: USB HID v1.11 Mouse [Lenovo Precision USB Mouse] on usb-PHYT0039:00-1.4/input0
driver: 'hid-generic': driver_bound: bound to device '0003:17EF:6050.0003'
bus: 'hid': really_probe: bound device 0003:17EF:6050.0003 to driver hid-generic
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
device: 'wakeup35': device_add
device: 'wakeup37': device_add
device: 'wakeup35': device_unregister
device: 'wakeup37': device_unregister
bus: 'usb': add driver usb-storage
bus: 'usb': driver_probe_device: matched device 4-1.3:1.0 with driver usb-storage
bus: 'usb': really_probe: probing driver usb-storage with device 4-1.3:1.0
usb-storage 4-1.3:1.0: no default pinctrl state
usb-storage 4-1.3:1.0: USB Mass Storage device detected
scsi host1: usb-storage 4-1.3:1.0
device: 'host1': device_add
bus: 'scsi': add device host1
PM: Adding info for scsi:host1
device: 'host1': device_add
PM: Adding info for No Bus:host1
driver: 'usb-storage': driver_bound: bound to device '4-1.3:1.0'
bus: 'usb': really_probe: bound device 4-1.3:1.0 to driver usb-storage
usbcore: registered new interface driver usb-storage
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
bus: 'usb': add driver uas
usbcore: registered new interface driver uas
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[drm] can not get n_m for link_rate(540000) and sample_rate(0)
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
scsi 1:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
device: 'target1:0:0': device_add
bus: 'scsi': add device target1:0:0
PM: Adding info for scsi:target1:0:0
device: '1:0:0:0': device_add
bus: 'scsi': add device 1:0:0:0
PM: Adding info for scsi:1:0:0:0
bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sr
bus: 'scsi': really_probe: probing driver sr with device 1:0:0:0
sr 1:0:0:0: no default pinctrl state
sr: probe of 1:0:0:0 rejects match -19
scsi 1:0:0:0: scheduling asynchronous probe
device: '1:0:0:0': device_add
bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sd
PM: Adding info for No Bus:1:0:0:0
bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
sd 1:0:0:0: no default pinctrl state
device: 'sg0': device_add
device: '1:0:0:0': device_add
PM: Adding info for No Bus:sg0
PM: Adding info for No Bus:1:0:0:0
sd 1:0:0:0: Attached scsi generic sg0 type 0
device: '1:0:0:0': device_add
PM: Adding info for No Bus:1:0:0:0
sd 1:0:0:0: [sda] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 1:0:0:0: [sda] No Caching mode page found
sd 1:0:0:0: [sda] Assuming drive cache: write through
device: '8:0': device_add
PM: Adding info for No Bus:8:0
device: 'sda': device_add
PM: Adding info for No Bus:sda
 sda:
sd 1:0:0:0: [sda] Attached SCSI removable disk
driver: 'sd': driver_bound: bound to device '1:0:0:0'
devices_kset: Moving PHYT8006:00 to end of list
PM: Moving platform:PHYT8006:00 to end of list
platform PHYT8006:00: Retrying from deferred list
bus: 'platform': driver_probe_device: matched device PHYT8006:00 with driver pmdk_dp
bus: 'platform': really_probe: probing driver pmdk_dp with device PHYT8006:00
pmdk_dp PHYT8006:00: no default pinctrl state
device: 'wakeup35': device_add
pmdk_sound_probe-183: num_dp: 2
pmdk_sound_probe-211
pmdk_dp PHYT8006:00: ASoC: CPU DAI phytium-i2s-dp0 not registered
device: 'wakeup35': device_unregister
platform PHYT8006:00: Driver pmdk_dp requests probe deferral
platform PHYT8006:00: Added to deferred list
bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
sd 1:0:0:0: async probe completed
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
get i2c adapter failed.
device class 'rfkill': registering
device: 'rfkill': device_add
PM: Adding info for No Bus:rfkill
device: 'vcs7': device_add
PM: Adding info for No Bus:vcs7
device: 'vcsu7': device_add
PM: Adding info for No Bus:vcsu7
device: 'vcsa7': device_add
PM: Adding info for No Bus:vcsa7
device: 'pps0': device_add
PM: Adding info for No Bus:pps0
pps pps0: new PPS source ptp0
device: 'ptp0': device_add
PM: Adding info for No Bus:ptp0
macb PHYT0036:02: gem-ptp-timer ptp clock registered.
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
macb PHYT0036:02 eth0: yt8521_read_status, phy addr: 0, link up, media: UTP, mii reg 0x11 = 0xbc00
macb PHYT0036:02 eth0: link up (1000/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
[drm] can not get n_m for link_rate(540000) and sample_rate(0)
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
systemd-journald[312]: Received client request to flush runtime journal.
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
usb 4-1.3: USB disconnect, device number 4
device: 'ep_01': device_unregister
PM: Removing info for No Bus:ep_01
device: 'ep_82': device_unregister
PM: Removing info for No Bus:ep_82
bus: 'usb': remove device 4-1.3:1.0
device: '1:0:0:0': device_unregister
PM: Removing info for No Bus:1:0:0:0
device: '1:0:0:0': device_create_release
device: '1:0:0:0': device_unregister
device: 'sg0': device_unregister
PM: Removing info for No Bus:sg0
device: 'sg0': device_create_release
PM: Removing info for No Bus:1:0:0:0
bus: 'scsi': remove device 1:0:0:0
PM: Removing info for No Bus:1:0:0:0
device: '8:0': device_unregister
PM: Removing info for No Bus:8:0
device: '8:0': device_create_release
PM: Removing info for No Bus:sda
PM: Removing info for scsi:1:0:0:0
bus: 'scsi': remove device target1:0:0
PM: Removing info for scsi:target1:0:0
device: 'host1': device_unregister
PM: Removing info for No Bus:host1
bus: 'scsi': remove device host1
PM: Removing info for scsi:host1
PM: Removing info for usb:4-1.3:1.0
device: 'ep_00': device_unregister
PM: Removing info for No Bus:ep_00
bus: 'usb': remove device 4-1.3
PM: Removing info for usb:4-1.3
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
device: 'lo': device_add
PM: Adding info for No Bus:lo
device: 'sit0': device_add
PM: Adding info for No Bus:sit0
device: 'ip6tnl0': device_add
PM: Adding info for No Bus:ip6tnl0
PM: Removing info for No Bus:ip6tnl0
PM: Removing info for No Bus:sit0
PM: Removing info for No Bus:lo
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out
i2c-phytium-platform PHYT0038:0f: controller timed out

Return To 202411201631 System Information