dmesg - 2024.10.28_n100
microcode: microcode updated early to revision 0x17, date = 2023-12-07
Linux version 6.1.0-25-amd64 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26)
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007263bfff] usable
BIOS-e820: [mem 0x000000007263c000-0x000000007573bfff] reserved
BIOS-e820: [mem 0x000000007573c000-0x0000000075812fff] ACPI data
BIOS-e820: [mem 0x0000000075813000-0x00000000758d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000758d3000-0x0000000075f65fff] reserved
BIOS-e820: [mem 0x0000000075f66000-0x0000000075ffefff] type 20
BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable
BIOS-e820: [mem 0x0000000076000000-0x0000000079ffffff] reserved
BIOS-e820: [mem 0x000000007aa00000-0x000000007abfffff] reserved
BIOS-e820: [mem 0x000000007b000000-0x00000000803fffff] reserved
BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fbfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.80 by American Megatrends
efi: ACPI=0x75812000 ACPI 2.0=0x75812014 TPMFinalLog=0x75880000 SMBIOS=0x75d8e000 SMBIOS 3.0=0x75d8d000 MEMATTR=0x6f8f2198 ESRT=0x6be4bb98
secureboot: Secure boot disabled
SMBIOS 3.5.0 present.
DMI: Default string Default string/Default string, BIOS 5.26 03/28/2024
tsc: Detected 800.000 MHz processor
tsc: Detected 806.400 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x47fc00 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x76000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000006be4bb98 to 0x000000006be4bce8.
e820: update [mem 0x6be4b000-0x6be4bfff] usable ==> reserved
Using GB pages for direct mapping
RAMDISK: [mem 0x2e8d5000-0x33461fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000075812014 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000075811728 00010C (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x0000000075810000 000114 (v06 ALASKA A M I 01072009 AMI 01000013)
ACPI: DSDT 0x0000000075798000 077878 (v02 ALASKA A M I 01072009 INTL 20200717)
ACPI: FACS 0x00000000758D2000 000040
ACPI: FIDT 0x0000000075797000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MSDM 0x0000000075796000 000055 (v03 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000075795000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
ACPI: SSDT 0x000000007578F000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717)
ACPI: SSDT 0x000000007578C000 002A45 (v02 SaSsdt SaSsdt 00003000 INTL 20200717)
ACPI: SSDT 0x0000000075788000 0033D3 (v02 INTEL IgfxSsdt 00003000 INTL 20200717)
ACPI: HPET 0x0000000075787000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: APIC 0x0000000075786000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x0000000075785000 00003C (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000075783000 001FFD (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
ACPI: UEFI 0x0000000075867000 000048 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: PSDS 0x0000000075782000 000052 (v01 INTEL EDK2 00000005 INTL 0100000D)
ACPI: NHLT 0x0000000075781000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x0000000075780000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000007577C000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
ACPI: SSDT 0x0000000075779000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
ACPI: DBGP 0x0000000075778000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x0000000075777000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: DMAR 0x0000000075776000 000088 (v02 INTEL EDK2 00000002 01000013)
ACPI: FPDT 0x0000000075775000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x0000000075774000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717)
ACPI: SSDT 0x0000000075770000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717)
ACPI: SSDT 0x000000007576C000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717)
ACPI: SSDT 0x000000007576B000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717)
ACPI: BGRT 0x000000007576A000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x0000000075769000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: PHAT 0x0000000075768000 000671 (v01 ALASKA A M I 00000005 MSFT 0100000D)
ACPI: WSMT 0x000000007577F000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0x75810000-0x75810113]
ACPI: Reserving DSDT table memory at [mem 0x75798000-0x7580f877]
ACPI: Reserving FACS table memory at [mem 0x758d2000-0x758d203f]
ACPI: Reserving FIDT table memory at [mem 0x75797000-0x7579709b]
ACPI: Reserving MSDM table memory at [mem 0x75796000-0x75796054]
ACPI: Reserving SSDT table memory at [mem 0x75795000-0x7579538b]
ACPI: Reserving SSDT table memory at [mem 0x7578f000-0x75794d0a]
ACPI: Reserving SSDT table memory at [mem 0x7578c000-0x7578ea44]
ACPI: Reserving SSDT table memory at [mem 0x75788000-0x7578b3d2]
ACPI: Reserving HPET table memory at [mem 0x75787000-0x75787037]
ACPI: Reserving APIC table memory at [mem 0x75786000-0x757861db]
ACPI: Reserving MCFG table memory at [mem 0x75785000-0x7578503b]
ACPI: Reserving SSDT table memory at [mem 0x75783000-0x75784ffc]
ACPI: Reserving UEFI table memory at [mem 0x75867000-0x75867047]
ACPI: Reserving PSDS table memory at [mem 0x75782000-0x75782051]
ACPI: Reserving NHLT table memory at [mem 0x75781000-0x7578102c]
ACPI: Reserving LPIT table memory at [mem 0x75780000-0x757800cb]
ACPI: Reserving SSDT table memory at [mem 0x7577c000-0x7577ea82]
ACPI: Reserving SSDT table memory at [mem 0x75779000-0x7577b356]
ACPI: Reserving DBGP table memory at [mem 0x75778000-0x75778033]
ACPI: Reserving DBG2 table memory at [mem 0x75777000-0x75777053]
ACPI: Reserving DMAR table memory at [mem 0x75776000-0x75776087]
ACPI: Reserving FPDT table memory at [mem 0x75775000-0x75775043]
ACPI: Reserving SSDT table memory at [mem 0x75774000-0x75774739]
ACPI: Reserving SSDT table memory at [mem 0x75770000-0x75773ae9]
ACPI: Reserving SSDT table memory at [mem 0x7576c000-0x7576f9d9]
ACPI: Reserving SSDT table memory at [mem 0x7576b000-0x7576b143]
ACPI: Reserving BGRT table memory at [mem 0x7576a000-0x7576a037]
ACPI: Reserving TPM2 table memory at [mem 0x75769000-0x7576904b]
ACPI: Reserving PHAT table memory at [mem 0x75768000-0x75768670]
ACPI: Reserving WSMT table memory at [mem 0x7577f000-0x7577f027]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047fbfffff]
NODE_DATA(0) allocated [mem 0x47fbd5000-0x47fbfffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fbfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000007263bfff]
node 0: [mem 0x0000000075fff000-0x0000000075ffffff]
node 0: [mem 0x0000000100000000-0x000000047fbfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fbfffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 14787 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
On node 0, zone Normal: 1024 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x6bd36000-0x6bd88fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x6bd36000-0x6bd88fff]
PM: hibernation: Registered nosave memory: [mem 0x6be4b000-0x6be4bfff]
PM: hibernation: Registered nosave memory: [mem 0x7263c000-0x7573bfff]
PM: hibernation: Registered nosave memory: [mem 0x7573c000-0x75812fff]
PM: hibernation: Registered nosave memory: [mem 0x75813000-0x758d2fff]
PM: hibernation: Registered nosave memory: [mem 0x758d3000-0x75f65fff]
PM: hibernation: Registered nosave memory: [mem 0x75f66000-0x75ffefff]
PM: hibernation: Registered nosave memory: [mem 0x76000000-0x79ffffff]
PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff]
PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff]
PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff]
PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff]
PM: hibernation: Registered nosave memory: [mem 0x80400000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80400000-0xbfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 4072628
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 4.
Memory: 1799036K/16549740K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 545536K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 40246 entries in 158 pages
ftrace: allocated 158 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 1612.80 BogoMIPS (lpj=3225600)
CPU0: Thermal monitoring enabled (TM1)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced / Automatic IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Register File Data Sampling: Mitigation: Clear Register File
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Gracemont events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 5
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000003f
signal: max sigframe size: 3632
Estimated ratio of average max frequency by base frequency (times 1024): 3712
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (6451.20 BogoMIPS)
node 0 deferred pages initialised in 20ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x75813000-0x758d2fff] (786432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1730046055.032:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F28257B4E00 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F25C1269000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F28257B4400 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F2825761000 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F282575E000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F282575C000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F282575A000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8F25C0126000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI: PM: Power Resource [WRST]
ACPI: PM: Power Resource [FN00]
ACPI: PM: Power Resource [FN01]
ACPI: PM: Power Resource [FN02]
ACPI: PM: Power Resource [FN03]
ACPI: PM: Power Resource [FN04]
ACPI: PM: Power Resource [PIN]
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window]
pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:461c] type 00 class 0x060000
pci 0000:00:02.0: [8086:46d1] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
pci 0000:00:14.0: [8086:54ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:54ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001117fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x600111b000-0x600111bfff 64bit]
pci 0000:00:16.0: [8086:54e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x600111a000-0x600111afff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:54d3] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0x80700000-0x80701fff]
pci 0000:00:17.0: reg 0x14: [mem 0x80703000-0x807030ff]
pci 0000:00:17.0: reg 0x18: [io 0x6090-0x6097]
pci 0000:00:17.0: reg 0x1c: [io 0x6080-0x6083]
pci 0000:00:17.0: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:17.0: reg 0x24: [mem 0x80702000-0x807027ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1a.0: [8086:54c4] type 00 class 0x080501
pci 0000:00:1a.0: reg 0x10: [mem 0x6001119000-0x6001119fff 64bit]
pci 0000:00:1c.0: [8086:54bb] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:54b2] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.3: [8086:54b3] type 01 class 0x060400
pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:5481] type 00 class 0x060100
pci 0000:00:1f.3: [8086:54c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:54a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x6001118000-0x60011180ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:54a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x5000-0x50ff]
pci 0000:01:00.0: reg 0x18: [mem 0x80604000-0x80604fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x80600000-0x80603fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x80600000-0x806fffff]
pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:02:00.0: reg 0x18: [mem 0x80500000-0x8050ffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1d.0: bridge window [mem 0x80500000-0x805fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0x80404000-0x80404fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0x80400000-0x80403fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.3: bridge window [mem 0x80400000-0x804fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 1
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6bd36000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6be4b000-0x6bffffff]
e820: reserve RAM buffer [mem 0x7263c000-0x73ffffff]
e820: reserve RAM buffer [mem 0x76000000-0x77ffffff]
e820: reserve RAM buffer [mem 0x47fc00000-0x47fffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1854-0x1857] has been reserved
pnp 00:02: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
system 00:02: [mem 0xfedc0000-0xfedc7fff] has been reserved
system 00:02: [mem 0xfeda0000-0xfeda0fff] has been reserved
system 00:02: [mem 0xfeda1000-0xfeda1fff] has been reserved
system 00:02: [mem 0xfed20000-0xfed7ffff] could not be reserved
system 00:02: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: [io 0x2000-0x20fe] has been reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
pci 0000:00:1f.5: BAR 0: assigned [mem 0x80704000-0x80704fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x80600000-0x806fffff]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1d.0: bridge window [mem 0x80500000-0x805fffff]
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.3: bridge window [mem 0x80400000-0x804fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window]
pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0x80600000-0x806fffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x80500000-0x805fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0x80400000-0x804fffff]
PCI: CLS 64 bytes, default 64
DMAR: No ATSR found
DMAR: No SATC found
DMAR: IOMMU feature fl1gp_support inconsistent
DMAR: IOMMU feature pgsel_inv inconsistent
DMAR: IOMMU feature nwfs inconsistent
DMAR: IOMMU feature dit inconsistent
DMAR: IOMMU feature sc_support inconsistent
DMAR: IOMMU feature dev_iotlb_support inconsistent
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
Trying to unpack rootfs image as initramfs...
pci 0000:00:02.0: Adding to iommu group 0
pci 0000:00:00.0: Adding to iommu group 1
pci 0000:00:14.0: Adding to iommu group 2
pci 0000:00:14.2: Adding to iommu group 2
pci 0000:00:16.0: Adding to iommu group 3
pci 0000:00:17.0: Adding to iommu group 4
pci 0000:00:1a.0: Adding to iommu group 5
pci 0000:00:1c.0: Adding to iommu group 6
pci 0000:00:1d.0: Adding to iommu group 7
pci 0000:00:1d.3: Adding to iommu group 8
pci 0000:00:1f.0: Adding to iommu group 9
pci 0000:00:1f.3: Adding to iommu group 9
pci 0000:00:1f.4: Adding to iommu group 9
pci 0000:00:1f.5: Adding to iommu group 9
pci 0000:01:00.0: Adding to iommu group 10
pci 0000:02:00.0: Adding to iommu group 11
pci 0000:03:00.0: Adding to iommu group 12
DMAR: Intel(R) Virtualization Technology for Directed I/O
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000067d36000-0x000000006bd36000] (64MB)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
clocksource: Switched to clocksource tsc
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 77364K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: AER: enabled with IRQ 122
pcieport 0000:00:1d.0: AER: enabled with IRQ 123
pcieport 0000:00:1d.3: AER: enabled with IRQ 124
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2024-10-27T16:20:56 UTC (1730046056)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: framebuffer at 0x4000000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: sig=0xb06e0, pf=0x1, revision=0x17
microcode: Microcode Update Driver: v2.2.
resctrl: L2 allocation detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (778241097, 6860188)->(798421730, -13320445)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2796K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1168K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i2c i2c-0: 4/8 memory slots populated (from DMI)
i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
cryptd: max_cpu_qlen set to 1000
ACPI: bus type drm_connector registered
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
libata version 3.00 loaded.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0)
mmc0: CQHCI version 5.10
mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
scsi host0: ahci
scsi host1: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0x80702000 port 0x80702180 irq 126
r8169 0000:01:00.0 eth0: RTL8168h/8111h, 68:1d:ef:45:64:9c, XID 541, IRQ 127
r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth1: RTL8168h/8111h, 68:1d:ef:45:64:9d, XID 541, IRQ 128
r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
usb 1-1: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: SK800-512GB, V0915A0, max UDMA/133
ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SK800-512GB 5A0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=0bda, idProduct=c821, bcdDevice= 1.10
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Bluetooth Radio
usb 1-1: Manufacturer: Realtek
usb 1-1: SerialNumber: 00e04c000001
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
usb 1-3: new full-speed USB device number 3 using xhci_hcd
i915 0000:00:02.0: [drm] VT-d active for gfx access
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: [drm] Using Transparent Hugepages
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_guc_70.bin
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16)
i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_huc.bin
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
usb 1-3: New USB device found, idVendor=25a7, idProduct=fa61, bcdDevice= 6.94
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Baseus F02 Mouse
usb 1-3: Manufacturer: CX
hid: raw HID events driver (C) Jiri Kosina
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CX Baseus F02 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:25A7:FA61.0001/input/input4
usb 1-4: new full-speed USB device number 4 using xhci_hcd
hid-generic 0003:25A7:FA61.0001: input,hidraw0: USB HID v1.11 Keyboard [CX Baseus F02 Mouse] on usb-0000:00:14.0-3/input0
input: CX Baseus F02 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:25A7:FA61.0002/input/input5
input: CX Baseus F02 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:25A7:FA61.0002/input/input6
input: CX Baseus F02 Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:25A7:FA61.0002/input/input7
usb 1-4: New USB device found, idVendor=2b89, idProduct=3632, bcdDevice= 6.25
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: UGREEN Slim Mouse
usb 1-4: Manufacturer: CX
input: CX UGREEN Slim Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2B89:3632.0003/input/input10
input: CX Baseus F02 Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:25A7:FA61.0002/input/input8
hid-generic 0003:2B89:3632.0003: input,hidraw1: USB HID v1.10 Keyboard [CX UGREEN Slim Mouse] on usb-0000:00:14.0-4/input0
hid-generic 0003:25A7:FA61.0002: input,hiddev0,hidraw2: USB HID v1.11 Mouse [CX Baseus F02 Mouse] on usb-0000:00:14.0-3/input1
input: CX UGREEN Slim Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:2B89:3632.0004/input/input11
input: CX UGREEN Slim Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:2B89:3632.0004/input/input12
input: CX UGREEN Slim Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:2B89:3632.0004/input/input13
input: CX UGREEN Slim Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:2B89:3632.0004/input/input14
hid-generic 0003:2B89:3632.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [CX UGREEN Slim Mouse] on usb-0000:00:14.0-4/input1
raid6: avx2x4 gen() 23195 MB/s
usb 1-6: new full-speed USB device number 5 using xhci_hcd
raid6: avx2x2 gen() 25614 MB/s
raid6: avx2x1 gen() 21440 MB/s
raid6: using algorithm avx2x2 gen() 25614 MB/s
usb 1-6: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Audio and HID
usb 1-6: Manufacturer: CSCTEK
usb 1-6: SerialNumber: A34004801402
usbhid 1-6:1.3: couldn't find an input interrupt endpoint
raid6: .... xor() 14691 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
usb 1-7: new full-speed USB device number 6 using xhci_hcd
usb 1-7: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice=81.34
usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-7: Product: USB Serial
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
PM: Image not found (code -22)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none.
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
intel_pmc_core INT33A1:00: initialized
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
sd 1:0:0:0: Attached scsi generic sg0 type 0
iTCO_vendor_support: vendor-support=0
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
platform regulatory.0: firmware: direct-loading firmware regulatory.db
platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003)
rtw_8821ce 0000:02:00.0: firmware: direct-loading firmware rtw88/rtw8821c_fw.bin
rtw_8821ce 0000:02:00.0: Firmware version 24.11.0, H2C version 12
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
mc: Linux media interface: v0.10
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ch341
ch341 1-7:1.0: ch341-uart converter detected
usb 1-7: ch341-uart converter now attached to ttyUSB0
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
usb 1-6: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16
usb 1-6: Warning! Unlikely big volume range (=896), cval->res is probably wrong.
usb 1-6: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16
usbcore: registered new interface driver snd-usb-audio
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EXT4-fs (dm-0): re-mounted. Quota mode: none.
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Bluetooth: hci0: RTL: fw version 0x75b8f098
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
loop: module loaded
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
Adding 20344828k swap on /swap/swap. Priority:-2 extents:23 across:92364796k SSFS
networking done
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input20
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
NET: Registered PF_QIPCRTR protocol family
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
QNX4 filesystem 0.2.3 registered.
fuse: init (API version 7.37)
pcieport 0000:00:1d.0: AER: Multiple Corrected error message received from 0000:02:00.0
rtw_8821ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
rtw_8821ce 0000:02:00.0: device [10ec:c821] error status/mask=00000080/0000e000
rtw_8821ce 0000:02:00.0: [ 7] BadDLLP
r8169 0000:03:00.0 eth1: Link is Down
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
ata2.00: configured for UDMA/133
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
Bluetooth: hci0: RTL: fw version 0x75b8f098
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
Bluetooth: MGMT ver 1.22
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:02:00.0
rtw_8821ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
rtw_8821ce 0000:02:00.0: device [10ec:c821] error status/mask=00000080/0000e000
rtw_8821ce 0000:02:00.0: [ 7] BadDLLP
r8169 0000:03:00.0 eth1: Link is Down
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
PM: suspend entry (deep)
Filesystems sync: 0.001 seconds
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.003 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
r8169 0000:03:00.0 eth1: Link is Down
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:01:00.0 eth0: Link is Down
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
ata2.00: configured for UDMA/133
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
r8169 0000:03:00.0 eth1: Link is Down
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.003 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
r8169 0000:03:00.0 eth1: Link is Down
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
r8169 0000:01:00.0 eth0: Link is Down
r8169 0000:03:00.0 eth1: Link is Down
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata2.00: configured for UDMA/133
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
Bluetooth: MGMT ver 1.22
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.003 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
r8169 0000:03:00.0 eth1: Link is Down
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:01:00.0 eth0: Link is Down
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
ata2.00: configured for UDMA/133
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
traps: codium[111973] trap int3 ip:56095236e76a sp:7fff685c22f0 error:0 in codium[56094e6d1000+83b5000]
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
(NULL device *): firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.004 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
r8169 0000:03:00.0 eth1: Link is Down
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:01:00.0 eth0: Link is Down
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
ata2.00: configured for UDMA/133
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
r8169 0000:01:00.0 eth0: Link is Down
Bluetooth: MGMT ver 1.22
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
traps: codium[117216] trap int3 ip:562ba790676a sp:7ffcfc638ef0 error:0 in codium[562ba3c69000+83b5000]
traps: obsidian[122943] trap int3 ip:56233788b4aa sp:7ffc2518db00 error:0 in obsidian[562333a3f000+8657000]
pcieport 0000:00:1d.0: AER: Multiple Corrected error message received from 0000:02:00.0
rtw_8821ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
rtw_8821ce 0000:02:00.0: device [10ec:c821] error status/mask=00000080/0000e000
rtw_8821ce 0000:02:00.0: [ 7] BadDLLP
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
(NULL device *): firmware: direct-loading firmware regulatory.db
(NULL device *): firmware: direct-loading firmware regulatory.db.p7s
(NULL device *): firmware: direct-loading firmware i915/adlp_dmc_ver2_16.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_guc_70.bin
(NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
r8169 0000:03:00.0 eth1: Link is Down
sd 1:0:0:0: [sda] Synchronizing SCSI cache
ata2.00: Entering standby power mode
ACPI: PM: Preparing to enter system sleep state S3
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: PM: Low-level resume complete
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: PM: Waking up from system sleep state S3
i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 70.20.0
i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
i915 0000:00:02.0: [drm] HuC authenticated
i915 0000:00:02.0: [drm] GuC submission enabled
i915 0000:00:02.0: [drm] GuC SLPC enabled
i915 0000:00:02.0: [drm] GuC RC: enabled
r8169 0000:01:00.0 eth0: Link is Down
r8169 0000:03:00.0 eth1: Link is Down
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: Entering active power mode
ata2.00: configured for UDMA/133
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
usb 1-6: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
r8169 0000:01:00.0 eth0: Link is Down
Bluetooth: MGMT ver 1.22
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
pcieport 0000:00:1d.0: AER: Multiple Corrected error message received from 0000:02:00.0
rtw_8821ce 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
rtw_8821ce 0000:02:00.0: device [10ec:c821] error status/mask=00000080/0000e000
rtw_8821ce 0000:02:00.0: [ 7] BadDLLP
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
process 'trsteep/Downloads/Geekbench-6.3.0-Linux/geekbench_avx2' started with executable stack