dmesg - tom

Return To tom System Information

microcode: microcode updated early to revision 0xa, date = 2018-05-08
Linux version 5.15.0-112-generic (buildd@lcy02-amd64-051) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #122-Ubuntu SMP Thu May 23 07:48:21 UTC 2024 (Ubuntu 5.15.0-112.122-generic 5.15.152)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cbc4dfff] usable
BIOS-e820: [mem 0x00000000cbc4e000-0x00000000cbc4efff] reserved
BIOS-e820: [mem 0x00000000cbc4f000-0x00000000cbc93fff] ACPI NVS
BIOS-e820: [mem 0x00000000cbc94000-0x00000000cbe0efff] reserved
BIOS-e820: [mem 0x00000000cbe0f000-0x00000000cbe0ffff] ACPI data
BIOS-e820: [mem 0x00000000cbe10000-0x00000000cbe10fff] ACPI NVS
BIOS-e820: [mem 0x00000000cbe11000-0x00000000cbe18fff] ACPI data
BIOS-e820: [mem 0x00000000cbe19000-0x00000000cbe19fff] ACPI NVS
BIOS-e820: [mem 0x00000000cbe1a000-0x00000000cbe1bfff] ACPI data
BIOS-e820: [mem 0x00000000cbe1c000-0x00000000cbe23fff] ACPI NVS
BIOS-e820: [mem 0x00000000cbe24000-0x00000000cbe44fff] reserved
BIOS-e820: [mem 0x00000000cbe45000-0x00000000cbe87fff] ACPI NVS
BIOS-e820: [mem 0x00000000cbe88000-0x00000000cbffffff] usable
BIOS-e820: [mem 0x00000000cc000000-0x00000000cf7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x02739018-0x02749057] usable ==> usable
e820: update [mem 0x02739018-0x02749057] usable ==> usable
e820: update [mem 0x02983018-0x02991e57] usable ==> usable
e820: update [mem 0x02983018-0x02991e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000002739017] usable
reserve setup_data: [mem 0x0000000002739018-0x0000000002749057] usable
reserve setup_data: [mem 0x0000000002749058-0x0000000002983017] usable
reserve setup_data: [mem 0x0000000002983018-0x0000000002991e57] usable
reserve setup_data: [mem 0x0000000002991e58-0x00000000cbc4dfff] usable
reserve setup_data: [mem 0x00000000cbc4e000-0x00000000cbc4efff] reserved
reserve setup_data: [mem 0x00000000cbc4f000-0x00000000cbc93fff] ACPI NVS
reserve setup_data: [mem 0x00000000cbc94000-0x00000000cbe0efff] reserved
reserve setup_data: [mem 0x00000000cbe0f000-0x00000000cbe0ffff] ACPI data
reserve setup_data: [mem 0x00000000cbe10000-0x00000000cbe10fff] ACPI NVS
reserve setup_data: [mem 0x00000000cbe11000-0x00000000cbe18fff] ACPI data
reserve setup_data: [mem 0x00000000cbe19000-0x00000000cbe19fff] ACPI NVS
reserve setup_data: [mem 0x00000000cbe1a000-0x00000000cbe1bfff] ACPI data
reserve setup_data: [mem 0x00000000cbe1c000-0x00000000cbe23fff] ACPI NVS
reserve setup_data: [mem 0x00000000cbe24000-0x00000000cbe44fff] reserved
reserve setup_data: [mem 0x00000000cbe45000-0x00000000cbe87fff] ACPI NVS
reserve setup_data: [mem 0x00000000cbe88000-0x00000000cbffffff] usable
reserve setup_data: [mem 0x00000000cc000000-0x00000000cf7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000022fffffff] usable
efi: EFI v2.00 by American Megatrends
efi: ACPI 2.0=0xcbe1bf98 SMBIOS=0xcbe43d18 MOKvar=0xcbc4e000 
secureboot: Secure boot disabled
SMBIOS 2.6 present.
DMI: wortmann MBR1|1400G/DH55TC, BIOS TCIBX10H.86A.0039.2010.0722.1419 07/22/2010
tsc: Fast TSC calibration using PIT
tsc: Detected 2793.024 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x230000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 8192M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 6  	lose cover RAM: 0G
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccf0-0x000fccff]
secureboot: Secure boot disabled
RAMDISK: [mem 0xc4364000-0xcbc4dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CBE1BF98 000024 (v02 INTEL )
ACPI: XSDT 0x00000000CBE1AE18 00005C (v01 INTEL  DH55TC   01072009 MSFT 00010013)
ACPI: FACP 0x00000000CBE18D98 0000F4 (v04 INTEL  DH55TC   01072009 MSFT 00010013)
ACPI: DSDT 0x00000000CBE11018 006B88 (v01 INTEL  DH55TC   00000000 INTL 20051117)
ACPI: FACS 0x00000000CBE19F40 000040
ACPI: FACS 0x00000000CBE19E40 000040
ACPI: APIC 0x00000000CBE18F18 0000CC (v02 INTEL  DH55TC   01072009 MSFT 00010013)
ACPI: SSDT 0x00000000CBE0FE18 0001D6 (v01 INTEL  DH55TC   00000001 MSFT 03000001)
ACPI: MCFG 0x00000000CBE1BF18 00003C (v01 INTEL  DH55TC   01072009 MSFT 00000097)
ACPI: HPET 0x00000000CBE1BE98 000038 (v01 INTEL  DH55TC   01072009 AMI. 00000003)
ACPI: ASF! 0x00000000CBE1AC18 0000A0 (v32 INTEL  DH55TC   00000001 TFSM 000F4240)
ACPI: DMAR 0x00000000CBE1AB18 000068 (v01 INTEL  DH55TC   00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0xcbe18d98-0xcbe18e8b]
ACPI: Reserving DSDT table memory at [mem 0xcbe11018-0xcbe17b9f]
ACPI: Reserving FACS table memory at [mem 0xcbe19f40-0xcbe19f7f]
ACPI: Reserving FACS table memory at [mem 0xcbe19e40-0xcbe19e7f]
ACPI: Reserving APIC table memory at [mem 0xcbe18f18-0xcbe18fe3]
ACPI: Reserving SSDT table memory at [mem 0xcbe0fe18-0xcbe0ffed]
ACPI: Reserving MCFG table memory at [mem 0xcbe1bf18-0xcbe1bf53]
ACPI: Reserving HPET table memory at [mem 0xcbe1be98-0xcbe1becf]
ACPI: Reserving ASF! table memory at [mem 0xcbe1ac18-0xcbe1acb7]
ACPI: Reserving DMAR table memory at [mem 0xcbe1ab18-0xcbe1ab7f]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
NODE_DATA(0) allocated [mem 0x22ffd2000-0x22fffbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000022fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x00000000cbc4dfff]
  node   0: [mem 0x00000000cbe88000-0x00000000cbffffff]
  node   0: [mem 0x0000000100000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 570 pages in unavailable ranges
On node 0, zone Normal: 16384 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x02739000-0x02739fff]
PM: hibernation: Registered nosave memory: [mem 0x02749000-0x02749fff]
PM: hibernation: Registered nosave memory: [mem 0x02983000-0x02983fff]
PM: hibernation: Registered nosave memory: [mem 0x02991000-0x02991fff]
PM: hibernation: Registered nosave memory: [mem 0xcbc4e000-0xcbc4efff]
PM: hibernation: Registered nosave memory: [mem 0xcbc4f000-0xcbc93fff]
PM: hibernation: Registered nosave memory: [mem 0xcbc94000-0xcbe0efff]
PM: hibernation: Registered nosave memory: [mem 0xcbe0f000-0xcbe0ffff]
PM: hibernation: Registered nosave memory: [mem 0xcbe10000-0xcbe10fff]
PM: hibernation: Registered nosave memory: [mem 0xcbe11000-0xcbe18fff]
PM: hibernation: Registered nosave memory: [mem 0xcbe19000-0xcbe19fff]
PM: hibernation: Registered nosave memory: [mem 0xcbe1a000-0xcbe1bfff]
PM: hibernation: Registered nosave memory: [mem 0xcbe1c000-0xcbe23fff]
PM: hibernation: Registered nosave memory: [mem 0xcbe24000-0xcbe44fff]
PM: hibernation: Registered nosave memory: [mem 0xcbe45000-0xcbe87fff]
PM: hibernation: Registered nosave memory: [mem 0xcc000000-0xcf7fffff]
PM: hibernation: Registered nosave memory: [mem 0xcf800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: hibernation: Registered nosave memory: [mem 0xe4000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe4000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Built 1 zonelists, mobility grouping on.  Total pages: 2047438
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-112-generic", will be passed to user space.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 7895092K/8320404K available (16393K kernel code, 4395K rwdata, 10952K rodata, 3368K init, 18700K bss, 425052K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 50718 entries in 199 pages
ftrace: allocated 199 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9078010ef0462 ecap f020e2
DMAR: RMRR base: 0x000000cbdf7000 end: 0x000000cbe0bfff
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x284282d51d2, max_idle_ns: 440795214011 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.04 BogoMIPS (lpj=11172096)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 44K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1072
smpboot: CPU0: Intel(R) Xeon(R) CPU           X3460  @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
signal: max sigframe size: 1440
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
MDS CPU bug present and SMT on, data leak possible. See  for more details.
  #2  #3  #4  #5  #6  #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (44688.38 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xcbc4f000-0xcbc93fff] (282624 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xcbe10000-0xcbe10fff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xcbe19000-0xcbe19fff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xcbe1c000-0xcbe23fff] (32768 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xcbe45000-0xcbe87fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 15:03:49, date: 2024-06-19
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1718809429.184:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF945B00EEA000 0006F4 (v01 AMI    IST      00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x3F, should be 0x91 (20210730/tbprint-173)
ACPI: SSDT 0xFFFF945B00216400 0000E4 (v01 AMI    CST      00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 14 GPEs in block 00 to 3F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
pci 0000:00:00.0: [8086:d130] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfe729000-0xfe72900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io  0xf150-0xf157]
pci 0000:00:16.2: reg 0x14: [io  0xf140-0xf143]
pci 0000:00:16.2: reg 0x18: [io  0xf130-0xf137]
pci 0000:00:16.2: reg 0x1c: [io  0xf120-0xf123]
pci 0000:00:16.2: reg 0x20: [io  0xf110-0xf11f]
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io  0xf100-0xf107]
pci 0000:00:16.3: reg 0x14: [mem 0xfe728000-0xfe728fff]
pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe727000-0xfe727fff]
pci 0000:00:19.0: reg 0x18: [io  0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfe726000-0xfe7263ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe720000-0xfe723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfe725000-0xfe7253ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x20: [io  0xf0b0-0xf0bf]
pci 0000:00:1f.2: reg 0x24: [io  0xf0a0-0xf0af]
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe724000-0xfe7240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.5: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.5: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.5: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.5: reg 0x20: [io  0xf050-0xf05f]
pci 0000:00:1f.5: reg 0x24: [io  0xf040-0xf04f]
pci 0000:01:00.0: [1002:6707] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 0: assigned to efifb
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:02:00.0: [104c:8020] type 00 class 0x0c0010
pci 0000:02:00.0: reg 0x10: [mem 0xfe504000-0xfe5047ff]
pci 0000:02:00.0: reg 0x14: [mem 0xfe500000-0xfe503fff]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 3
ACPI: PCI: Interrupt link LNKF configured for IRQ 11
ACPI: PCI: Interrupt link LNKG configured for IRQ 7
ACPI: PCI: Interrupt link LNKH configured for IRQ 4
iommu: Default domain type: Translated 
iommu: DMA domain TLB invalidation policy: lazy mode 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:3f:00.0: [8086:2c50] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:3f:03.2: [8086:2c9a] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x02739018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02983018-0x03ffffff]
e820: reserve RAM buffer [mem 0xcbc4e000-0xcbffffff]
hpet: 8 channels of 5 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 28
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x0400-0x047f] has been reserved
system 00:04: [io  0x1180-0x119f] has been reserved
system 00:04: [io  0x0500-0x057f] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x160 took 26648 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x160 took 23414 usecs
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000c0364000-0x00000000c4364000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:03.0: PME: Signaling with IRQ 29
pcieport 0000:00:03.0: AER: enabled with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
0000:00:16.3: ttyS4 at I/O 0xf100 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
ata4: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
scsi host4: ata_generic
scsi host5: ata_generic
ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe726000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-112-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe725000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-112-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2024-06-19T15:03:50 UTC (1718809430)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xd0000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: TOSHIBA HDWD110, MS2OA8R0, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: ATAPI: TSSTcorp CDDVDW TS-H653J, FT02, max UDMA/100
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/100
usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
Freeing initrd memory: 123816K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: sig=0x106e5, pf=0x2, revision=0xa
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1379194948, 283157)->(1404336707, -24858602)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 75d1bbbfdd5df9cb55bc893247a9a76b9677b161'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
CE: hpet increased min_delta_ns to 20115 nsec
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 75d1bbbfdd5df9cb55bc893247a9a76b9677b161'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 12:531:83
RAS: Correctable Errors collector initialized.
tsc: Refined TSC clocksource calibration: 2793.008 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284273cb9ca, max_idle_ns: 440795340288 ns
clocksource: Switched to clocksource tsc
usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: USB2.0-Serial
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
ata2.00: failed to resume link (SControl 0)
usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: 802.11 n WLAN
usb 1-1.3: Manufacturer: MediaTek
usb 1-1.3: SerialNumber: 1.0
usb 1-1.5: new low-speed USB device number 5 using ehci-pci
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c018, bcdDevice=43.01
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Optical Mouse
usb 1-1.5: Manufacturer: Logitech
ata1.01: failed to resume link (SControl 0)
usb 1-1.6: new low-speed USB device number 6 using ehci-pci
usb 1-1.6: New USB device found, idVendor=04ca, idProduct=0020, bcdDevice= 1.07
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Keyboard
usb 1-1.6: Manufacturer: LITEON Technology
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: SanDisk SSD PLUS 240 GB, UF3600RL, max UDMA/133
ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: Features: Dev-Sleep
ata2.01: ATA-10: WDC WD5003AZEX-00K3CA0, 01.01A01, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: Direct-Access     ATA      WDC WD5003AZEX-0 1A01 PQ: 0 ANSI: 5
sd 1:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:1:0: [sdb] 4096-byte physical blocks
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653J  FT02 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1
sd 1:0:1:0: [sdb] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8R0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3368K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1336K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/boot/vmlinuz-5.15.0-112-generic
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
hid: raw HID events driver (C) Jiri Kosina
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000549-0x0000000000000549 (\_SB.PCI0.SBRG.AY34) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 4/4 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
i2c i2c-0: Successfully instantiated SPD at 0x51
i2c i2c-0: Successfully instantiated SPD at 0x52
i2c i2c-0: Successfully instantiated SPD at 0x53
firewire_ohci 0000:02:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C018.0001/input/input2
hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
gpio_ich gpio_ich.2.auto: GPIO from 948 to 1023
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:0020.0002/input/input3
firewire_ohci 0000:02:00.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (CAYMAN 0x1002:0x6707 0x1002:0x0B06 0x00).
ATOM BIOS: Cayman
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAYMAN Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
hid-generic 0003:04CA:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.6/input0
input: LITEON Technology USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:0020.0003/input/input4
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:2e:33:05
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
input: LITEON Technology USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:0020.0003/input/input5
hid-generic 0003:04CA:0020.0003: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.6/input1
e1000e 0000:00:19.0 eno1: renamed from eth0
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
firewire_core 0000:02:00.0: created device fw0: GUID 003095268001bb28, S400
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD5
[drm]   DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD4
[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DVI-I-1
[drm]   HPD1
[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD0371000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
fbcon: Deferring console take-over
radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
random: lvm: uninitialized urandom read (4 bytes read)
random: lvm: uninitialized urandom read (4 bytes read)
raid6: sse2x4   gen()  9842 MB/s
raid6: sse2x4   xor()  7851 MB/s
raid6: sse2x2   gen() 13757 MB/s
raid6: sse2x2   xor()  8239 MB/s
raid6: sse2x1   gen() 10929 MB/s
raid6: sse2x1   xor()  6651 MB/s
raid6: using algorithm sse2x2 gen() 13757 MB/s
raid6: .... xor() 8239 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse  : 18296 MB/sec
   generic_sse     : 15682 MB/sec
xor: using function: prefetch64-sse (18296 MB/sec)
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
random: crng init done
systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: /lib/systemd/system/clamav-freshclam.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Activating swap /swapfile...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted Kernel Configuration File System.
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Adding 2097148k swap on /swapfile.  Priority:-2 extents:18 across:217260032k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swaps.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
systemd-journald[407]: Received client request to flush runtime journal.
systemd-journald[407]: File /var/log/journal/e7d0df732b0649e49e97a4d764308014/system.journal corrupted or uncleanly shut down, renaming and replacing.
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0050: 256 byte spd EEPROM, read-only
at24 0-0051: supply vcc not found, using dummy regulator
at24 0-0051: 256 byte spd EEPROM, read-only
at24 0-0052: supply vcc not found, using dummy regulator
at24 0-0052: 256 byte spd EEPROM, read-only
at24 0-0053: supply vcc not found, using dummy regulator
at24 0-0053: 256 byte spd EEPROM, read-only
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ch341
ch341 1-1.2:1.0: ch341-uart converter detected
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
usb 1-1.2: ch341-uart converter now attached to ttyUSB0
input: PC Speaker as /devices/platform/pcspkr/input/input6
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input7
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
mt7601u 1-1.3:1.0: ASIC revision: 76010001 MAC revision: 76010500
mt7601u 1-1.3:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
input: BRLTTY 6.4 Linux Screen Driver Keyboard as /devices/virtual/input/input13
mt7601u 1-1.3:1.0: EEPROM ver:0d fae:00
usb 1-1.2: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1
ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
ch341 1-1.2:1.0: device disconnected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver mt7601u
mt7601u 1-1.3:1.0 wlx00e0433d8610: renamed from wlan0
spl: loading out-of-tree module taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v2.1.5-1ubuntu6~22.04.3, ZFS pool version 5000, ZFS filesystem version 5
audit: type=1400 audit(1718809440.342:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1718809440.342:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1718809440.346:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1718809440.346:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=819 comm="apparmor_parser"
audit: type=1400 audit(1718809440.346:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=819 comm="apparmor_parser"
audit: type=1400 audit(1718809440.346:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=819 comm="apparmor_parser"
audit: type=1400 audit(1718809440.362:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1718809440.362:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=822 comm="apparmor_parser"
audit: type=1400 audit(1718809440.362:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=821 comm="apparmor_parser"
audit: type=1400 audit(1718809440.362:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=818 comm="apparmor_parser"
wlx00e0433d8610: authenticate with 60:38:e0:c5:38:31
wlx00e0433d8610: send auth to 60:38:e0:c5:38:31 (try 1/3)
wlx00e0433d8610: authenticated
wlx00e0433d8610: associating with AP with corrupt beacon and probe response
wlx00e0433d8610: associate with 60:38:e0:c5:38:31 (try 1/3)
wlx00e0433d8610: RX AssocResp from 60:38:e0:c5:38:31 (capab=0x411 status=0 aid=3)
wlx00e0433d8610: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx00e0433d8610: link becomes ready
systemd-journald[407]: File /var/log/journal/e7d0df732b0649e49e97a4d764308014/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1718809447.834:27): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/usr/local/lib/libclamunrar_iface.so.12.0.2" pid=1617 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1718809447.850:28): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1618 comm="cups-browsed" capability=23  capname="sys_nice"
usb 1-1.6: USB disconnect, device number 6
perf: interrupt took too long (2748 > 2500), lowering kernel.perf_event_max_sample_rate to 72750
usb 1-1.5: USB disconnect, device number 5
perf: interrupt took too long (3437 > 3435), lowering kernel.perf_event_max_sample_rate to 58000
perf: interrupt took too long (4411 > 4296), lowering kernel.perf_event_max_sample_rate to 45250
usb 1-1.6: new low-speed USB device number 7 using ehci-pci
usb 1-1.6: New USB device found, idVendor=046d, idProduct=c018, bcdDevice=43.01
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Optical Mouse
usb 1-1.6: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C018.0004/input/input14
hid-generic 0003:046D:C018.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0
usb 1-1.5: new low-speed USB device number 8 using ehci-pci
usb 1-1.5: New USB device found, idVendor=04ca, idProduct=0020, bcdDevice= 1.07
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Keyboard
usb 1-1.5: Manufacturer: LITEON Technology
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04CA:0020.0005/input/input15
hid-generic 0003:04CA:0020.0005: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.5/input0
input: LITEON Technology USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:04CA:0020.0006/input/input16
input: LITEON Technology USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:04CA:0020.0006/input/input17
hid-generic 0003:04CA:0020.0006: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.5/input1

Return To tom System Information