dmesg - bio3

Return To bio3 System Information

microcode: microcode updated early to revision 0x2007006, date = 2023-03-06
Linux version 5.14.0-362.24.1.el9_3.0.1.x86_64 ([email protected]) (gcc (GCC) 11.4.1 20230605 (Red Hat 11.4.1-2), GNU ld version 2.35.2-42.el9_3.1) #1 SMP PREEMPT_DYNAMIC Thu Apr 4 22:31:43 UTC 2024
The list of certified hardware and cloud instances for Enterprise Linux 9 can be viewed at the Red Hat Ecosystem Catalog, .
Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.0-362.24.1.el9_3.0.1.x86_64 root=/dev/mapper/rl-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl-swap rd.lvm.lv=rl/root rd.lvm.lv=rl/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: xstate_offset[5]:  960, xstate_sizes[5]:   64
x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]:  512
x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
x86/fpu: Enabled xstate features 0xff, context size is 2560 bytes, using 'compacted' format.
signal: max sigframe size: 3632
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003c9affff] usable
BIOS-e820: [mem 0x000000003c9b0000-0x000000003ed29fff] reserved
BIOS-e820: [mem 0x000000003ed2a000-0x000000003edb2fff] ACPI data
BIOS-e820: [mem 0x000000003edb3000-0x000000003fe6afff] ACPI NVS
BIOS-e820: [mem 0x000000003fe6b000-0x0000000040b6efff] reserved
BIOS-e820: [mem 0x0000000040b6f000-0x000000004fffffff] usable
BIOS-e820: [mem 0x0000000050000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000069fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/TUF X299 MARK 2, BIOS 0802 09/06/2017
tsc: Detected 3600.000 MHz processor
[Firmware Bug]: TSC ADJUST: CPU0: -42254609808 force to 0
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x6a0000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 24560M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 0G
e820: update [mem 0x5f000000-0xffffffff] usable ==> reserved
last_pfn = 0x50000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf70-0x000fcf7f]
Using GB pages for direct mapping
RAMDISK: [mem 0x31026000-0x3480afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003ED450D0 000114 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000003ED65070 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000003ED45278 01FDF8 (v02 ALASKA A M I    01072009 INTL 20160422)
ACPI: FACS 0x000000003FE38080 000040
ACPI: FPDT 0x000000003ED65188 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000003ED651D0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: WSMT 0x000000003EDB2BD8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: UEFI 0x000000003ED652C8 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: MCFG 0x000000003ED65310 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x000000003ED65350 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: APIC 0x000000003ED65388 00071E (v03 ALASKA A M I    00000000 INTL 20091013)
ACPI: MCFG 0x000000003ED65AA8 00003C (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MIGT 0x000000003ED65AE8 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: MSCT 0x000000003ED65B28 00004E (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: PCCT 0x000000003ED65B78 0000AC (v01 ALASKA A M I    00000002 INTL 20091013)
ACPI: RASF 0x000000003ED65C28 000030 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x000000003ED65C58 00006C (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x000000003ED65CC8 000A30 (v03 ALASKA A M I    00000002 INTL 20091013)
ACPI: SVOS 0x000000003ED666F8 000032 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: WDDT 0x000000003ED66730 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: OEM4 0x000000003ED66770 029A72 (v02 INTEL  CPU  CST 00003000 INTL 20160422)
ACPI: OEM1 0x000000003ED901E8 00ABCB (v02 INTEL  CPU EIST 00003000 INTL 20160422)
ACPI: OEM2 0x000000003ED9ADB8 006AB0 (v02 INTEL  CPU  HWP 00003000 INTL 20160422)
ACPI: SSDT 0x000000003EDA1868 00D427 (v02 INTEL  SSDT  PM 00004000 INTL 20160422)
ACPI: NITR 0x000000003EDAEC90 000071 (v02 ALASKA A M I    00000001 INTL 20091013)
ACPI: SSDT 0x000000003EDAED08 0009EB (v02 ALASKA A M I    00000000 INTL 20091013)
ACPI: LPIT 0x000000003EDAF6F8 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003EDAF790 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000003EDAFA30 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000003EDB2A38 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x000000003EDB2A70 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: TPM2 0x000000003EDB2AC8 000034 (v03 ALASKA A M I    00000001 AMI  00000000)
ACPI: DMAR 0x000000003EDB2B00 0000D8 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: Reserving FACP table memory at [mem 0x3ed65070-0x3ed65183]
ACPI: Reserving DSDT table memory at [mem 0x3ed45278-0x3ed6506f]
ACPI: Reserving FACS table memory at [mem 0x3fe38080-0x3fe380bf]
ACPI: Reserving FPDT table memory at [mem 0x3ed65188-0x3ed651cb]
ACPI: Reserving FIDT table memory at [mem 0x3ed651d0-0x3ed6526b]
ACPI: Reserving WSMT table memory at [mem 0x3edb2bd8-0x3edb2bff]
ACPI: Reserving UEFI table memory at [mem 0x3ed652c8-0x3ed65309]
ACPI: Reserving MCFG table memory at [mem 0x3ed65310-0x3ed6534b]
ACPI: Reserving HPET table memory at [mem 0x3ed65350-0x3ed65387]
ACPI: Reserving APIC table memory at [mem 0x3ed65388-0x3ed65aa5]
ACPI: Reserving MCFG table memory at [mem 0x3ed65aa8-0x3ed65ae3]
ACPI: Reserving MIGT table memory at [mem 0x3ed65ae8-0x3ed65b27]
ACPI: Reserving MSCT table memory at [mem 0x3ed65b28-0x3ed65b75]
ACPI: Reserving PCCT table memory at [mem 0x3ed65b78-0x3ed65c23]
ACPI: Reserving RASF table memory at [mem 0x3ed65c28-0x3ed65c57]
ACPI: Reserving SLIT table memory at [mem 0x3ed65c58-0x3ed65cc3]
ACPI: Reserving SRAT table memory at [mem 0x3ed65cc8-0x3ed666f7]
ACPI: Reserving SVOS table memory at [mem 0x3ed666f8-0x3ed66729]
ACPI: Reserving WDDT table memory at [mem 0x3ed66730-0x3ed6676f]
ACPI: Reserving OEM4 table memory at [mem 0x3ed66770-0x3ed901e1]
ACPI: Reserving OEM1 table memory at [mem 0x3ed901e8-0x3ed9adb2]
ACPI: Reserving OEM2 table memory at [mem 0x3ed9adb8-0x3eda1867]
ACPI: Reserving SSDT table memory at [mem 0x3eda1868-0x3edaec8e]
ACPI: Reserving NITR table memory at [mem 0x3edaec90-0x3edaed00]
ACPI: Reserving SSDT table memory at [mem 0x3edaed08-0x3edaf6f2]
ACPI: Reserving LPIT table memory at [mem 0x3edaf6f8-0x3edaf78b]
ACPI: Reserving SSDT table memory at [mem 0x3edaf790-0x3edafa2e]
ACPI: Reserving SSDT table memory at [mem 0x3edafa30-0x3edb2a31]
ACPI: Reserving DBGP table memory at [mem 0x3edb2a38-0x3edb2a6b]
ACPI: Reserving DBG2 table memory at [mem 0x3edb2a70-0x3edb2ac3]
ACPI: Reserving TPM2 table memory at [mem 0x3edb2ac8-0x3edb2afb]
ACPI: Reserving DMAR table memory at [mem 0x3edb2b00-0x3edb2bd7]
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xffffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x49fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x4a0000000-0x69fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0xffffffff] + [mem 0x100000000-0x49fffffff] -> [mem 0x00000000-0x49fffffff]
NUMA: Node 0 [mem 0x00000000-0x49fffffff] + [mem 0x4a0000000-0x69fffffff] -> [mem 0x00000000-0x69fffffff]
NODE_DATA(0) allocated [mem 0x69ffd4000-0x69fffefff]
Reserving 256MB of memory at 528MB for crashkernel (System RAM: 24253MB)
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000069fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x000000003c9affff]
  node   0: [mem 0x0000000040b6f000-0x000000004fffffff]
  node   0: [mem 0x0000000100000000-0x000000069fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000069fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 99 pages in unavailable ranges
On node 0, zone DMA32: 16831 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x1808
ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-31
IOAPIC[2]: apic_id 10, version 32, address 0xfec08000, GSI 32-39
IOAPIC[3]: apic_id 11, version 32, address 0xfec10000, GSI 40-47
IOAPIC[4]: apic_id 12, version 32, address 0xfec18000, GSI 48-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x3c9b0000-0x3ed29fff]
PM: hibernation: Registered nosave memory: [mem 0x3ed2a000-0x3edb2fff]
PM: hibernation: Registered nosave memory: [mem 0x3edb3000-0x3fe6afff]
PM: hibernation: Registered nosave memory: [mem 0x3fe6b000-0x40b6efff]
PM: hibernation: Registered nosave memory: [mem 0x50000000-0x6fffffff]
PM: hibernation: Registered nosave memory: [mem 0x70000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x70000000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 6111815
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.0-362.24.1.el9_3.0.1.x86_64 root=/dev/mapper/rl-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl-swap rd.lvm.lv=rl/root rd.lvm.lv=rl/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.0-362.24.1.el9_3.0.1.x86_64", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 16.
Memory: 988268K/24835956K available (16384K kernel code, 5596K rwdata, 11468K rodata, 3832K init, 6116K bss, 880192K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x1e/0x310 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 46264 entries in 181 pages
ftrace: allocated 181 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
random: crng init done
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20221020
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000b5ffc000 flags: 0x0
DMAR: dmar0: reg_base_addr b5ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000d8ffc000 flags: 0x0
DMAR: dmar1: reg_base_addr d8ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar2: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x00000092ffc000 flags: 0x1
DMAR: dmar3: reg_base_addr 92ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000003f10b000 end: 0x0000003f10dfff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 12 under DRHD base  0xfbffc000 IOMMU 2
DMAR-IR: IOAPIC id 11 under DRHD base  0xd8ffc000 IOMMU 1
DMAR-IR: IOAPIC id 10 under DRHD base  0xb5ffc000 IOMMU 0
DMAR-IR: IOAPIC id 8 under DRHD base  0x92ffc000 IOMMU 3
DMAR-IR: IOAPIC id 9 under DRHD base  0x92ffc000 IOMMU 3
DMAR-IR: HPET id 0 under DRHD base 0x92ffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=3600000)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,integrity,selinux,bpf
Yama: becoming mindful.
SELinux:  Initializing.
LSM support for eBPF active
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
RETBleed: Mitigation: IBRS
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
TAA: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
GDS: Mitigation: Microcode
Freeing SMP alternatives memory: 36K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1166
smpboot: CPU0: Intel(R) Core(TM) i7-7820X CPU @ 3.60GHz (family: 0x6, model: 0x55, stepping: 0x4)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 400.
printk: console [tty0] printing thread started
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
[Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
  #2  #3  #4  #5  #6  #7  #8
MDS CPU bug present and SMT on, data leak possible. See  for more details.
TAA CPU bug present and SMT on, data leak possible. See  for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See  for more details.
  #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (115200.00 BogoMIPS)
node 0 deferred pages initialised in 55ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x3edb3000-0x3fe6afff] (17530880 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1715073695.157:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
ACPI: [PCCT:0x00] Invalid zero length
Error parsing PCC subspaces from PCCT
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved as E820 entry
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Dynamic OEM Table Load:
ACPI: Dynamic OEM Table Load:
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PC00.LPC0.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI BIOS Error (bug): Could not resolve symbol [\SHAD._STA.SDS0], AE_NOT_FOUND (20221020/psargs-330)
ACPI Error: Aborting method \SHAD._STA due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-15])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0x3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0xfe010000-0xfe010fff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0x92ffffff window]
pci_bus 0000:00: root bus resource [mem 0x2f00000000-0x2f3fffffff window]
pci_bus 0000:00: root bus resource [bus 00-15]
pci 0000:00:00.0: [8086:2020] type 00 class 0x060000
pci 0000:00:04.0: [8086:2021] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0x92f64000-0x92f67fff 64bit]
pci 0000:00:04.1: [8086:2021] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0x92f60000-0x92f63fff 64bit]
pci 0000:00:04.2: [8086:2021] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0x92f5c000-0x92f5ffff 64bit]
pci 0000:00:04.3: [8086:2021] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0x92f58000-0x92f5bfff 64bit]
pci 0000:00:04.4: [8086:2021] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0x92f54000-0x92f57fff 64bit]
pci 0000:00:04.5: [8086:2021] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0x92f50000-0x92f53fff 64bit]
pci 0000:00:04.6: [8086:2021] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0x92f4c000-0x92f4ffff 64bit]
pci 0000:00:04.7: [8086:2021] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0x92f48000-0x92f4bfff 64bit]
pci 0000:00:05.0: [8086:2024] type 00 class 0x088000
pci 0000:00:05.2: [8086:2025] type 00 class 0x088000
pci 0000:00:05.4: [8086:2026] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0x92f6f000-0x92f6ffff]
pci 0000:00:08.0: [8086:2014] type 00 class 0x088000
pci 0000:00:08.1: [8086:2015] type 00 class 0x110100
pci 0000:00:08.2: [8086:2016] type 00 class 0x088000
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x92f30000-0x92f3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0x92f6e000-0x92f6efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x92f6d000-0x92f6dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0x92f68000-0x92f69fff]
pci 0000:00:17.0: reg 0x14: [mem 0x92f6c000-0x92f6c0ff]
pci 0000:00:17.0: reg 0x18: [io  0x3050-0x3057]
pci 0000:00:17.0: reg 0x1c: [io  0x3040-0x3043]
pci 0000:00:17.0: reg 0x20: [io  0x3020-0x303f]
pci 0000:00:17.0: reg 0x24: [mem 0x92f6b000-0x92f6b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2d2] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0x92f44000-0x92f47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x92f40000-0x92f43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x92f20000-0x92f2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x92f6a000-0x92f6a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0x3000-0x301f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0x92f00000-0x92f1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0x92e00000-0x92e03fff 64bit]
pci 0000:00:1b.4: PCI bridge to [bus 02]
pci 0000:00:1b.4:   bridge window [mem 0x92e00000-0x92efffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8812] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [io  0x2000-0x20ff]
pci 0000:04:00.0: reg 0x18: [mem 0x92d00000-0x92d03fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x92d00000-0x92dfffff]
pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0x92c00000-0x92c07fff 64bit]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: PME# supported from D0
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0x92c00000-0x92cfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 16-63])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:16
pci_bus 0000:16: root bus resource [io  0x4000-0x7fff window]
pci_bus 0000:16: root bus resource [mem 0x93000000-0xb5ffffff window]
pci_bus 0000:16: root bus resource [mem 0x2f40000000-0x2f7fffffff window]
pci_bus 0000:16: root bus resource [bus 16-63]
pci 0000:16:05.0: [8086:2034] type 00 class 0x088000
pci 0000:16:05.2: [8086:2035] type 00 class 0x088000
pci 0000:16:05.4: [8086:2036] type 00 class 0x080020
pci 0000:16:05.4: reg 0x10: [mem 0xb5f00000-0xb5f00fff]
pci 0000:16:08.0: [8086:208d] type 00 class 0x088000
pci 0000:16:08.1: [8086:208d] type 00 class 0x088000
pci 0000:16:08.2: [8086:208d] type 00 class 0x088000
pci 0000:16:08.3: [8086:208d] type 00 class 0x088000
pci 0000:16:08.4: [8086:208d] type 00 class 0x088000
pci 0000:16:08.5: [8086:208d] type 00 class 0x088000
pci 0000:16:08.6: [8086:208d] type 00 class 0x088000
pci 0000:16:08.7: [8086:208d] type 00 class 0x088000
pci 0000:16:09.0: [8086:208d] type 00 class 0x088000
pci 0000:16:09.1: [8086:208d] type 00 class 0x088000
pci 0000:16:0e.0: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.1: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.2: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.3: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.4: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.5: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.6: [8086:208e] type 00 class 0x088000
pci 0000:16:0e.7: [8086:208e] type 00 class 0x088000
pci 0000:16:0f.0: [8086:208e] type 00 class 0x088000
pci 0000:16:0f.1: [8086:208e] type 00 class 0x088000
pci 0000:16:1d.0: [8086:2054] type 00 class 0x088000
pci 0000:16:1d.1: [8086:2055] type 00 class 0x088000
pci 0000:16:1d.2: [8086:2056] type 00 class 0x088000
pci 0000:16:1d.3: [8086:2057] type 00 class 0x088000
pci 0000:16:1e.0: [8086:2080] type 00 class 0x088000
pci 0000:16:1e.1: [8086:2081] type 00 class 0x088000
pci 0000:16:1e.2: [8086:2082] type 00 class 0x088000
pci 0000:16:1e.3: [8086:2083] type 00 class 0x088000
pci 0000:16:1e.4: [8086:2084] type 00 class 0x088000
pci 0000:16:1e.5: [8086:2085] type 00 class 0x088000
pci 0000:16:1e.6: [8086:2086] type 00 class 0x088000
pci_bus 0000:16: on NUMA node 0
ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 64-b1])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:64
pci_bus 0000:64: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:64: root bus resource [io  0x8000-0xbfff window]
pci_bus 0000:64: root bus resource [io  0x03b0-0x03bb window]
pci_bus 0000:64: root bus resource [io  0x03c0-0x03df window]
pci_bus 0000:64: root bus resource [mem 0xb6000000-0xd8ffffff window]
pci_bus 0000:64: root bus resource [mem 0x2f80000000-0x2fbfffffff window]
pci_bus 0000:64: root bus resource [bus 64-b1]
pci 0000:64:00.0: [8086:2030] type 01 class 0x060400
pci 0000:64:00.0: PME# supported from D0 D3hot D3cold
pci 0000:64:05.0: [8086:2034] type 00 class 0x088000
pci 0000:64:05.2: [8086:2035] type 00 class 0x088000
pci 0000:64:05.4: [8086:2036] type 00 class 0x080020
pci 0000:64:05.4: reg 0x10: [mem 0xd8100000-0xd8100fff]
pci 0000:64:08.0: [8086:2066] type 00 class 0x088000
pci 0000:64:09.0: [8086:2066] type 00 class 0x088000
pci 0000:64:0a.0: [8086:2040] type 00 class 0x088000
pci 0000:64:0a.1: [8086:2041] type 00 class 0x088000
pci 0000:64:0a.2: [8086:2042] type 00 class 0x088000
pci 0000:64:0a.3: [8086:2043] type 00 class 0x088000
pci 0000:64:0a.4: [8086:2044] type 00 class 0x088000
pci 0000:64:0a.5: [8086:2045] type 00 class 0x088000
pci 0000:64:0a.6: [8086:2046] type 00 class 0x088000
pci 0000:64:0a.7: [8086:2047] type 00 class 0x088000
pci 0000:64:0b.0: [8086:2048] type 00 class 0x088000
pci 0000:64:0b.1: [8086:2049] type 00 class 0x088000
pci 0000:64:0b.2: [8086:204a] type 00 class 0x088000
pci 0000:64:0b.3: [8086:204b] type 00 class 0x088000
pci 0000:64:0c.0: [8086:2040] type 00 class 0x088000
pci 0000:64:0c.1: [8086:2041] type 00 class 0x088000
pci 0000:64:0c.2: [8086:2042] type 00 class 0x088000
pci 0000:64:0c.3: [8086:2043] type 00 class 0x088000
pci 0000:64:0c.4: [8086:2044] type 00 class 0x088000
pci 0000:64:0c.5: [8086:2045] type 00 class 0x088000
pci 0000:64:0c.6: [8086:2046] type 00 class 0x088000
pci 0000:64:0c.7: [8086:2047] type 00 class 0x088000
pci 0000:64:0d.0: [8086:2048] type 00 class 0x088000
pci 0000:64:0d.1: [8086:2049] type 00 class 0x088000
pci 0000:64:0d.2: [8086:204a] type 00 class 0x088000
pci 0000:64:0d.3: [8086:204b] type 00 class 0x088000
pci 0000:65:00.0: [10de:1b06] type 00 class 0x030000
pci 0000:65:00.0: reg 0x10: [mem 0xd7000000-0xd7ffffff]
pci 0000:65:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:65:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:65:00.0: reg 0x24: [io  0xb000-0xb07f]
pci 0000:65:00.0: reg 0x30: [mem 0xd8000000-0xd807ffff pref]
pci 0000:65:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:65:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:64:00.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:65:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:65:00.1: reg 0x10: [mem 0xd8080000-0xd8083fff]
pci 0000:64:00.0: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:64:00.0: PCI bridge to [bus 65]
pci 0000:64:00.0:   bridge window [io  0xb000-0xbfff]
pci 0000:64:00.0:   bridge window [mem 0xd7000000-0xd80fffff]
pci 0000:64:00.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:64: on NUMA node 0
ACPI: PCI Root Bridge [PC03] (domain 0000 [bus b2-ff])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:b2
pci_bus 0000:b2: root bus resource [io  0xc000-0xffff window]
pci_bus 0000:b2: root bus resource [mem 0xd9000000-0xfbffffff window]
pci_bus 0000:b2: root bus resource [mem 0x2fc0000000-0x2fffffffff window]
pci_bus 0000:b2: root bus resource [bus b2-ff]
pci 0000:b2:05.0: [8086:2034] type 00 class 0x088000
pci 0000:b2:05.2: [8086:2035] type 00 class 0x088000
pci 0000:b2:05.4: [8086:2036] type 00 class 0x080020
pci 0000:b2:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
pci 0000:b2:12.0: [8086:204c] type 00 class 0x110100
pci 0000:b2:12.1: [8086:204d] type 00 class 0x110100
pci 0000:b2:12.2: [8086:204e] type 00 class 0x088000
pci 0000:b2:15.0: [8086:2018] type 00 class 0x088000
pci 0000:b2:16.0: [8086:2018] type 00 class 0x088000
pci 0000:b2:16.4: [8086:2018] type 00 class 0x088000
pci 0000:b2:17.0: [8086:2018] type 00 class 0x088000
pci_bus 0000:b2: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 14
ACPI: PCI: Interrupt link LNKD configured for IRQ 15
ACPI: PCI: Interrupt link LNKE configured for IRQ 3
ACPI: PCI: Interrupt link LNKF configured for IRQ 5
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI BIOS Error (bug): Could not resolve symbol [\SHAD._STA.SDS0], AE_NOT_FOUND (20221020/psargs-330)
ACPI Error: Aborting method \SHAD._STA due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x16
ACPI: \_SB_.PC00.LPC0.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PC00.LPC0.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated 
iommu: DMA domain TLB invalidation policy: lazy mode 
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x3c9b0000-0x3fffffff]
pci 0000:65:00.0: vgaarb: setting as boot VGA device
pci 0000:65:00.0: vgaarb: bridge control possible
pci 0000:65:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0540-0x057f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0ca0-0x0ca5] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:03: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:03: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:03: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
system 00:03: [mem 0xfe011000-0xfe01ffff] has been reserved
system 00:03: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:03: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:03: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:04: [io  0x0f00-0x0ffe] has been reserved
ACPI BIOS Error (bug): Could not resolve symbol [\SHAD._STA.SDS0], AE_NOT_FOUND (20221020/psargs-330)
ACPI Error: Aborting method \SHAD._STA due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.4: PCI bridge to [bus 02]
pci 0000:00:1b.4:   bridge window [mem 0x92e00000-0x92efffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x92d00000-0x92dfffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0x92c00000-0x92cfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0x3fff window]
pci_bus 0000:00: resource 6 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 7 [mem 0xfe010000-0xfe010fff window]
pci_bus 0000:00: resource 8 [mem 0x70000000-0x92ffffff window]
pci_bus 0000:00: resource 9 [mem 0x2f00000000-0x2f3fffffff window]
pci_bus 0000:02: resource 1 [mem 0x92e00000-0x92efffff]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x92d00000-0x92dfffff]
pci_bus 0000:05: resource 1 [mem 0x92c00000-0x92cfffff]
pci_bus 0000:16: resource 4 [io  0x4000-0x7fff window]
pci_bus 0000:16: resource 5 [mem 0x93000000-0xb5ffffff window]
pci_bus 0000:16: resource 6 [mem 0x2f40000000-0x2f7fffffff window]
pci 0000:64:00.0: PCI bridge to [bus 65]
pci 0000:64:00.0:   bridge window [io  0xb000-0xbfff]
pci 0000:64:00.0:   bridge window [mem 0xd7000000-0xd80fffff]
pci 0000:64:00.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:64: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:64: resource 5 [io  0x8000-0xbfff window]
pci_bus 0000:64: resource 6 [io  0x03b0-0x03bb window]
pci_bus 0000:64: resource 7 [io  0x03c0-0x03df window]
pci_bus 0000:64: resource 8 [mem 0xb6000000-0xd8ffffff window]
pci_bus 0000:64: resource 9 [mem 0x2f80000000-0x2fbfffffff window]
pci_bus 0000:65: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:65: resource 1 [mem 0xd7000000-0xd80fffff]
pci_bus 0000:65: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:b2: resource 4 [io  0xc000-0xffff window]
pci_bus 0000:b2: resource 5 [mem 0xd9000000-0xfbffffff window]
pci_bus 0000:b2: resource 6 [mem 0x2fc0000000-0x2fffffffff window]
pci 0000:05:00.0: PME# does not work under D0, disabling it
pci 0000:16:05.0: disabled boot interrupts on device [8086:2034]
pci 0000:64:05.0: disabled boot interrupts on device [8086:2034]
pci 0000:65:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:65:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:65:00.1: D0 power state depends on 0000:65:00.0
pci 0000:b2:05.0: disabled boot interrupts on device [8086:2034]
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000004c000000-0x0000000050000000] (64MB)
ACPI: bus type thunderbolt registered
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function   avx       
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Running certificate verification selftests
Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:1b.0: PME: Signaling with IRQ 24
pcieport 0000:00:1b.4: PME: Signaling with IRQ 25
pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
pcieport 0000:00:1c.4: PME: Signaling with IRQ 28
pcieport 0000:64:00.0: PME: Signaling with IRQ 30
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.SCK0.CP00: Found 2 idle states
intel_idle: forced intel_idle_irq for state 0
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1166
Non-volatile memory driver v1.3
tpm_crb: probe of MSFT0101:00 failed with error 378
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.14.0-362.24.1.el9_3.0.1.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.14.0-362.24.1.el9_3.0.1.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.14.0-362.24.1.el9_3.0.1.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.14.0-362.24.1.el9_3.0.1.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2024-05-07T09:21:35 UTC (1715073695)
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: HWP enabled by BIOS
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
usb 1-1: new low-speed USB device number 2 using xhci_hcd
Freeing initrd memory: 57236K
Segment Routing with IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: Microcode Update Driver: v2.2.
resctrl: MB allocation detected
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (863776345, 4353726)->(887065706, -18935635)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Rocky kernel signing key: 4d2b1020fffc9503b86f8624f149a91811fde20b'
Loaded X.509 cert 'Rocky Enterprise Software Foundation: Rocky Linux Driver Signing Cert 101: ce537f0c615c038114acbb01233a5b62b93a1971'
Loaded X.509 cert 'Rocky Enterprise Software Foundation: Rocky Linux Driver Signing Cert 101 (aarch64): 27049f986744cc3d6a729d084fea189a8a4162ae'
Loaded X.509 cert 'Rocky Enterprise Software Foundation: Rocky Linux IMA CA: 1d1cda4d16acd5196226d19e1fdb2c2761d12c4d'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Rocky kernel signing key: 4d2b1020fffc9503b86f8624f149a91811fde20b'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
usb 1-1: New USB device found, idVendor=046d, idProduct=c34b, bcdDevice=62.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Keyboard
usb 1-1: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C34B.0001/input/input3
hid-generic 0003:046D:C34B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C34B.0002/input/input4
hid-generic 0003:046D:C34B.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 3832K
Write protecting the kernel read-only data: 28672k
Freeing unused kernel image (rodata/data gap) memory: 820K
usb 1-2: new full-speed USB device number 3 using xhci_hcd
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    rhgb
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.0-362.24.1.el9_3.0.1.x86_64
systemd[1]: systemd 252-18.el9.0.1.rocky running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Created slice Slice /system/systemd-hibernate-resume.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on D-Bus System Message Bus Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create System Users...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create List of Static Device Nodes.
usb 1-2: New USB device found, idVendor=046d, idProduct=c542, bcdDevice= 3.02
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Wireless Receiver
usb 1-2: Manufacturer: Logitech
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
input: Logitech Wireless Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C542.0003/input/input5
hid-generic 0003:046D:C542.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Receiver] on usb-0000:00:14.0-2/input0
systemd[1]: Finished Create Static Device Nodes in /dev.
fuse: init (API version 7.36)
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Started Journal Service.
tsc: Refined TSC clocksource calibration: 3600.011 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e45d8079c, max_idle_ns: 440795324677 ns
clocksource: Switched to clocksource tsc
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
nvme nvme0: pci function 0000:02:00.0
nvme nvme0: 7/0/0 default/read/poll queues
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
 nvme0n1: p1 p2
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b100 irq 41
ata2: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b180 irq 41
ata3: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b200 irq 41
ata4: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b280 irq 41
ata5: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b300 irq 41
ata6: SATA max UDMA/133 abar m2048@0x92f6b000 port 0x92f6b380 irq 41
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:38:6e:b5
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: Crucial_CT1050MX300SSD4,  M0CR060, max UDMA/133
ata6.00: ATAPI: HL-DT-ST BD-RE  BH16NS55, 1.02, max UDMA/133
ata6.00: configured for UDMA/133
ata1.00: 2051200368 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT1050MX R060 PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH16NS55  1.02 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 2051200368 512-byte logical blocks: (1.05 TB/978 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: Attached scsi generic sg1 type 5
PM: Image not found (code -22)
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
systemd-journald[356]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1715073697.663:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
SELinux:  policy capability genfs_seclabel_symlinks=1
audit: type=1403 audit(1715073697.735:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 72.961ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 23.231ms.
systemd[1]: systemd 252-18.el9.0.1.rocky running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd-rc-local-generator[728]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Slice /system/akmods-keygen.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/sshd-keygen.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: multipathd control socket was skipped because of an unmet condition check (ConditionPathExists=/etc/multipath.conf).
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Activating swap /dev/mapper/rl-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
Adding 12201980k swap on /dev/mapper/rl-swap.  Priority:-2 extents:1 across:12201980k SSFS
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Read and set NIS domainname from /etc/sysconfig/network...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Generate network units from Kernel command line...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Activated swap /dev/mapper/rl-swap.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Read and set NIS domainname from /etc/sysconfig/network.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Generate network units from Kernel command line.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Reached target Swaps.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Special handling of early boot iSCSI sessions was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/class/iscsi_session).
systemd[1]: OSTree Remount OS/ Bind Mounts was skipped because of an unmet condition check (ConditionKernelCommandLine=ostree).
systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Create System Users was skipped because no trigger condition checks were met.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
systemd-journald[754]: Received client request to flush runtime journal.
ACPI: bus type drm_connector registered
dca service started, version 1.12.1
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ioatdma: Intel(R) QuickData Technology Driver 5.00
i2c i2c-0: 3/8 memory slots populated (from DMI)
i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
input: PC Speaker as /devices/platform/pcspkr/input/input6
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_intel 0000:65:00.1: Disabling MSI
snd_hda_intel 0000:65:00.1: Handle vga_switcheroo audio client
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:64/0000:64:00.0/0000:65:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:64/0000:64:00.0/0000:65:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:64/0000:64:00.0/0000:65:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:64/0000:64:00.0/0000:65:00.1/sound/card1/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
snd_hda_intel 0000:00:1f.3: device 1043:8733 is on the power_save denylist, forcing power_save to 0
rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
rtl8821ae 0000:04:00.0 wlp4s0: renamed from wlan0
EDAC skx: ECC is disabled on imc 0
intel_rapl_common: Found RAPL domain package
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 235

nvidia 0000:65:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  545.29.06  Thu Nov 16 01:59:08 UTC 2023
nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
nvidia-uvm: Loaded the UVM driver, major device number 511.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  545.29.06  Thu Nov 16 01:47:29 UTC 2023
[drm] [nvidia-drm] [GPU ID 0x00006500] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:65:00.0 on minor 0
nvidia 0000:65:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
fbcon: nvidia-drmdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
nvidia 0000:65:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
XFS (nvme0n1p1): Mounting V5 Filesystem
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Starting recovery (logdev: internal)
XFS (nvme0n1p1): Starting recovery (logdev: internal)
XFS (nvme0n1p1): Ending recovery (logdev: internal)
XFS (dm-2): Ending recovery (logdev: internal)
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 1
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 1
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 0
[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00006500] Flip event timeout on head 1
NET: Registered PF_QIPCRTR protocol family
wlp4s0: authenticate with 6c:8b:d3:f5:1b:ec
wlp4s0: send auth to 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: RX AssocResp from 6c:8b:d3:f5:1b:ec (capab=0x101 status=0 aid=2)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
wlp4s0: Limiting TX power to 9 dBm as advertised by 6c:8b:d3:f5:1b:ec
block dm-0: the capability attribute has been deprecated.
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
wlp4s0: deauthenticating from 6c:8b:d3:f5:1b:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp4s0: authenticate with 6c:8b:d3:f5:1b:ec
wlp4s0: send auth to 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: RX AssocResp from 6c:8b:d3:f5:1b:ec (capab=0x101 status=0 aid=2)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
wlp4s0: Limiting TX power to 9 dBm as advertised by 6c:8b:d3:f5:1b:ec
rfkill: input handler enabled
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
wlp4s0: disassociated from 6c:8b:d3:f5:1b:ec (Reason: 1=UNSPECIFIED)
wlp4s0: authenticate with 4c:e1:75:c0:1f:8c
wlp4s0: send auth to 4c:e1:75:c0:1f:8c (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 4c:e1:75:c0:1f:8c (try 1/3)
wlp4s0: RX AssocResp from 4c:e1:75:c0:1f:8c (capab=0x101 status=0 aid=1)
wlp4s0: associated
wlp4s0: Limiting TX power to 8 dBm as advertised by 4c:e1:75:c0:1f:8c
wlp4s0: deauthenticating from 4c:e1:75:c0:1f:8c by local choice (Reason: 3=DEAUTH_LEAVING)
wlp4s0: authenticate with 6c:8b:d3:f5:1b:ec
wlp4s0: send auth to 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: RX AssocResp from 6c:8b:d3:f5:1b:ec (capab=0x101 status=0 aid=1)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
wlp4s0: Limiting TX power to 9 dBm as advertised by 6c:8b:d3:f5:1b:ec
rfkill: input handler enabled
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
wlp4s0: disassociated from 6c:8b:d3:f5:1b:ec (Reason: 1=UNSPECIFIED)
wlp4s0: authenticate with 4c:e1:75:c0:1f:8c
wlp4s0: send auth to 4c:e1:75:c0:1f:8c (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 4c:e1:75:c0:1f:8c (try 1/3)
wlp4s0: associate with 4c:e1:75:c0:1f:8c (try 2/3)
wlp4s0: associate with 4c:e1:75:c0:1f:8c (try 3/3)
wlp4s0: association with 4c:e1:75:c0:1f:8c timed out
wlp4s0: authenticate with 6c:8b:d3:f5:1b:e3
wlp4s0: 80 MHz not supported, disabling VHT
wlp4s0: send auth to 6c:8b:d3:f5:1b:e3 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 6c:8b:d3:f5:1b:e3 (try 1/3)
wlp4s0: RX AssocResp from 6c:8b:d3:f5:1b:e3 (capab=0x421 status=0 aid=1)
wlp4s0: associated
wlp4s0: Limiting TX power to 5 dBm as advertised by 6c:8b:d3:f5:1b:e3
wlp4s0: deauthenticating from 6c:8b:d3:f5:1b:e3 by local choice (Reason: 3=DEAUTH_LEAVING)
wlp4s0: authenticate with 6c:8b:d3:f5:1b:ec
wlp4s0: send auth to 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 6c:8b:d3:f5:1b:ec (try 1/3)
wlp4s0: RX AssocResp from 6c:8b:d3:f5:1b:ec (capab=0x101 status=0 aid=1)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
wlp4s0: Limiting TX power to 9 dBm as advertised by 6c:8b:d3:f5:1b:ec

Return To bio3 System Information