dmesg - yes

Return To yes System Information

microcode: updated early: 0xa6 -> 0xb6, date = 2023-09-13
Linux version 6.5.0-13parrot1-amd64 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.5.13-1parrot1 (2023-12-19)
x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006d6b7fff] usable
BIOS-e820: [mem 0x000000006d6b8000-0x0000000071ff0fff] reserved
BIOS-e820: [mem 0x0000000071ff1000-0x00000000720bcfff] ACPI data
BIOS-e820: [mem 0x00000000720bd000-0x0000000072176fff] ACPI NVS
BIOS-e820: [mem 0x0000000072177000-0x000000007273afff] reserved
BIOS-e820: [mem 0x000000007273b000-0x00000000727fefff] type 20
BIOS-e820: [mem 0x00000000727ff000-0x00000000727fffff] usable
BIOS-e820: [mem 0x0000000072800000-0x0000000078ffffff] reserved
BIOS-e820: [mem 0x0000000079a00000-0x0000000079bfffff] reserved
BIOS-e820: [mem 0x000000007a400000-0x00000000807fffff] reserved
BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027f7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.7 by American Megatrends
efi: ACPI=0x720bc000 ACPI 2.0=0x720bc014 TPMFinalLog=0x72102000 SMBIOS=0x725f6000 SMBIOS 3.0=0x725f5000 MEMATTR=0x6ac9e018 ESRT=0x6bc7c498 
efi: Remove mem67: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
e820: remove [mem 0xc0000000-0xcfffffff] reserved
efi: Not removing mem68: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
efi: Not removing mem69: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem70: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem72: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem73: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.5.0 present.
DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X515EA_X515EA/X515EA, BIOS X515EA.314 06/02/2023
tsc: Detected 2400.000 MHz processor
tsc: Detected 2419.200 MHz TSC
[Firmware Bug]: TSC ADJUST: CPU0: -896254840 force to 0
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x27f800 max_arch_pfn = 0x400000000
MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x72800 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000006bc7c498 to 0x000000006bc7c4f8.
e820: update [mem 0x6bc7c000-0x6bc7cfff] usable ==> reserved
Using GB pages for direct mapping
RAMDISK: [mem 0x2d981000-0x32cb7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000720BC014 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000720BB728 0000F4 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: FACP 0x00000000720B7000 000114 (v06 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: DSDT 0x0000000072056000 060720 (v02 _ASUS_ Notebook 01072009 INTL 20191018)
ACPI: FACS 0x0000000072173000 000040
ACPI: SSDT 0x00000000720B8000 00255D (v02 CpuRef CpuSsdt  00003000 INTL 20191018)
ACPI: FIDT 0x0000000072055000 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x0000000072054000 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MSDM 0x0000000072053000 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
ACPI: SSDT 0x000000007204E000 004D76 (v02 DptfTa DptfTabl 00001000 INTL 20191018)
ACPI: SSDT 0x000000007204B000 002F57 (v02 SaSsdt SaSsdt   00003000 INTL 20191018)
ACPI: SSDT 0x0000000072047000 0032D6 (v02 INTEL  IgfxSsdt 00003000 INTL 20191018)
ACPI: HPET 0x0000000072046000 000038 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: APIC 0x0000000072045000 00012C (v04 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: SSDT 0x000000007203E000 00613F (v02 _ASUS_ TglU_Rvp 00001000 INTL 20191018)
ACPI: NHLT 0x000000007203D000 0002E1 (v00 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: LPIT 0x000000007203C000 0000CC (v01 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: SSDT 0x000000007203A000 00012A (v02 _ASUS_ TbtTypeC 00000000 INTL 20191018)
ACPI: DBGP 0x0000000072039000 000034 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: DBG2 0x0000000072038000 000054 (v00 _ASUS_ Notebook 01072009 AMI  01000013)
ACPI: DMAR 0x0000000072037000 000088 (v02 INTEL  EDK2     00000002      01000013)
ACPI: FPDT 0x0000000072036000 000044 (v01 _ASUS_ A M I    01072009 AMI  01000013)
ACPI: MCFG 0x0000000072035000 00003C (v01                 00000001      00000000)
ACPI: SSDT 0x0000000072034000 000144 (v02 Intel  ADebTabl 00001000 INTL 20191018)
ACPI: BGRT 0x0000000072033000 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: UEFI 0x00000000720E3000 00063A (v01 INTEL  RstVmdE  00000000 ??   00000000)
ACPI: UEFI 0x00000000720E2000 00005C (v01 INTEL  RstVmdV  00000000 ??   00000000)
ACPI: TPM2 0x0000000072032000 00004C (v04 _ASUS_ Notebook 00000001 AMI  00000000)
ACPI: PTDT 0x0000000072031000 000D44 (v00 _ASUS_ Notebook 00000005 MSFT 0100000D)
ACPI: WSMT 0x000000007203B000 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: Reserving FACP table memory at [mem 0x720b7000-0x720b7113]
ACPI: Reserving DSDT table memory at [mem 0x72056000-0x720b671f]
ACPI: Reserving FACS table memory at [mem 0x72173000-0x7217303f]
ACPI: Reserving SSDT table memory at [mem 0x720b8000-0x720ba55c]
ACPI: Reserving FIDT table memory at [mem 0x72055000-0x7205509b]
ACPI: Reserving ECDT table memory at [mem 0x72054000-0x720540c0]
ACPI: Reserving MSDM table memory at [mem 0x72053000-0x72053054]
ACPI: Reserving SSDT table memory at [mem 0x7204e000-0x72052d75]
ACPI: Reserving SSDT table memory at [mem 0x7204b000-0x7204df56]
ACPI: Reserving SSDT table memory at [mem 0x72047000-0x7204a2d5]
ACPI: Reserving HPET table memory at [mem 0x72046000-0x72046037]
ACPI: Reserving APIC table memory at [mem 0x72045000-0x7204512b]
ACPI: Reserving SSDT table memory at [mem 0x7203e000-0x7204413e]
ACPI: Reserving NHLT table memory at [mem 0x7203d000-0x7203d2e0]
ACPI: Reserving LPIT table memory at [mem 0x7203c000-0x7203c0cb]
ACPI: Reserving SSDT table memory at [mem 0x7203a000-0x7203a129]
ACPI: Reserving DBGP table memory at [mem 0x72039000-0x72039033]
ACPI: Reserving DBG2 table memory at [mem 0x72038000-0x72038053]
ACPI: Reserving DMAR table memory at [mem 0x72037000-0x72037087]
ACPI: Reserving FPDT table memory at [mem 0x72036000-0x72036043]
ACPI: Reserving MCFG table memory at [mem 0x72035000-0x7203503b]
ACPI: Reserving SSDT table memory at [mem 0x72034000-0x72034143]
ACPI: Reserving BGRT table memory at [mem 0x72033000-0x72033037]
ACPI: Reserving UEFI table memory at [mem 0x720e3000-0x720e3639]
ACPI: Reserving UEFI table memory at [mem 0x720e2000-0x720e205b]
ACPI: Reserving TPM2 table memory at [mem 0x72032000-0x7203204b]
ACPI: Reserving PTDT table memory at [mem 0x72031000-0x72031d43]
ACPI: Reserving WSMT table memory at [mem 0x7203b000-0x7203b027]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027f7fffff]
NODE_DATA(0) allocated [mem 0x27f7d3000-0x27f7fdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000027f7fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000006d6b7fff]
  node   0: [mem 0x00000000727ff000-0x00000000727fffff]
  node   0: [mem 0x0000000100000000-0x000000027f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027f7fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 20807 pages in unavailable ranges
On node 0, zone Normal: 22528 pages in unavailable ranges
On node 0, zone Normal: 2048 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7c800000-0x807fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x6ab9e000-0x6abccfff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x6ab9e000-0x6abccfff]
PM: hibernation: Registered nosave memory: [mem 0x6bc7c000-0x6bc7cfff]
PM: hibernation: Registered nosave memory: [mem 0x6d6b8000-0x71ff0fff]
PM: hibernation: Registered nosave memory: [mem 0x71ff1000-0x720bcfff]
PM: hibernation: Registered nosave memory: [mem 0x720bd000-0x72176fff]
PM: hibernation: Registered nosave memory: [mem 0x72177000-0x7273afff]
PM: hibernation: Registered nosave memory: [mem 0x7273b000-0x727fefff]
PM: hibernation: Registered nosave memory: [mem 0x72800000-0x78ffffff]
PM: hibernation: Registered nosave memory: [mem 0x79000000-0x799fffff]
PM: hibernation: Registered nosave memory: [mem 0x79a00000-0x79bfffff]
PM: hibernation: Registered nosave memory: [mem 0x79c00000-0x7a3fffff]
PM: hibernation: Registered nosave memory: [mem 0x7a400000-0x807fffff]
PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0x80800000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Unknown kernel command line parameters "splash noautomount splash BOOT_IMAGE=/@/boot/vmlinuz-6.5.0-13parrot1-amd64", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 1987198
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 8.
Memory: 1654200K/8075612K available (14336K kernel code, 2346K rwdata, 10348K rodata, 3936K init, 18128K bss, 413372K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 42192 entries in 165 pages
ftrace: allocated 165 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007c000000 end: 0x000000807fffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4840.00 BogoMIPS (lpj=8064000)
CPU0: Thermal monitoring enabled (TM1)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
process: using mwait in idle threads
CET detected: Indirect Branch Tracking enabled
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced / Automatic IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
GDS: Mitigation: Microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,yama,apparmor,tomoyo,bpf,integrity
landlock: Up and running.
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1)
RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                5
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   4
... event mask:             0001000f000000ff
signal: max sigframe size: 3632
Estimated ratio of average max frequency by base frequency (times 1024): 1621
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
[Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (38722.00 BogoMIPS)
node 0 deferred pages initialised in 7ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x720bd000-0x72176fff] (761856 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1713736828.023:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xc0000000-0xc02fffff] (base 0xc0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90068131C600 0001CB (v02 PmRef  Cpu0Psd  00003000 INTL 20191018)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9006811CA800 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF900680F4D800 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9006811CDC00 00028B (v02 PmRef  Cpu0Hwp  00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90068012F000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90068138F800 00048A (v02 PmRef  ApHwp    00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90068138E000 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90068138C800 00048A (v02 PmRef  ApCst    00003000 INTL 20191018)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xc0000000-0xc02fffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xc02fffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: \_SB_.PC00.PEG0.PXP_: New power resource
ACPI: \_SB_.PC00.RP04.PXSX.WRST: New power resource
ACPI: \_SB_.PC00.RP04.PXSX.DRST: New power resource
ACPI: \_SB_.PC00.RP05.PXP_: New power resource
ACPI: \_SB_.PC00.RP08.PXP_: New power resource
ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BPRR: New power resource
ACPI: \_SB_.PC00.PAUD: New power resource
ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
ACPI: \_SB_.PC00.I2C0.PXTC: New power resource
ACPI: \_SB_.PC00.I2C0.PTPL: New power resource
ACPI: \_SB_.PC00.I2C1.PXTC: New power resource
ACPI: \_SB_.PC00.I2C2.PXTC: New power resource
ACPI: \_SB_.PC00.CNVW.WRST: New power resource
ACPI: \_SB_.PC00.VMD0.RP05.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT0.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT1.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT2.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT3.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT4.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT5.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT6.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.PRT7.NVPR: New power resource
ACPI: \_SB_.PC00.VMD0.VOL0.V0PR: New power resource
ACPI: \_SB_.PC00.VMD0.VOL1.V1PR: New power resource
ACPI: \_SB_.PC00.VMD0.VOL2.V2PR: New power resource
ACPI: \_SB_.PC00.VMD0.VOL3.V3PR: New power resource
ACPI: \PIN_: New power resource
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-02])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-02]
pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0x6003200000-0x600321ffff 64bit]
pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x6003247000-0x6003247fff 64bit]
pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000
pci 0000:00:0a.0: reg 0x10: [mem 0x6003230000-0x6003237fff 64bit]
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
pci 0000:00:0e.0: reg 0x18: [mem 0x82000000-0x83ffffff]
pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x6003220000-0x600322ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x600323c000-0x600323ffff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x6003246000-0x6003246fff 64bit]
pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x6003243000-0x6003243fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000
pci 0000:00:1c.0: [8086:a0b8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:a0bb] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PTM enabled (root), 4ns granularity
pci 0000:00:1e.0: [8086:a0a8] type 00 class 0x078000
pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:1e.2: [8086:a0aa] type 00 class 0x0c8000
pci 0000:00:1e.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0x6003238000-0x600323bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x6003240000-0x60032400ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:02:00.0: reg 0x18: [mem 0x84000000-0x8400ffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0x84000000-0x840fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 1
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
Low-power S0 idle used by default for system suspend
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x6e
ACPI: \_SB_.PC00.LPCB.EC0_: Boot ECDT EC initialization complete
ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6ab9e000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6bc7c000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6d6b8000-0x6fffffff]
e820: reserve RAM buffer [mem 0x72800000-0x73ffffff]
e820: reserve RAM buffer [mem 0x27f800000-0x27fffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x1854-0x1857] has been reserved
pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [io  0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:05: [io  0x2000-0x20fe] has been reserved
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
pci 0000:00:1e.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
pci 0000:00:1e.2: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0x84000000-0x840fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 8 [mem 0x80800000-0xbfffffff window]
pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x84000000-0x840fffff]
PCI: CLS 64 bytes, default 64
DMAR: No ATSR found
DMAR: No SATC found
DMAR: IOMMU feature fl1gp_support inconsistent
DMAR: IOMMU feature pgsel_inv inconsistent
DMAR: IOMMU feature nwfs inconsistent
DMAR: IOMMU feature dit inconsistent
DMAR: IOMMU feature sc_support inconsistent
DMAR: IOMMU feature dev_iotlb_support inconsistent
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
Trying to unpack rootfs image as initramfs...
pci 0000:00:02.0: Adding to iommu group 0
pci 0000:00:00.0: Adding to iommu group 1
pci 0000:00:04.0: Adding to iommu group 2
pci 0000:00:08.0: Adding to iommu group 3
pci 0000:00:0a.0: Adding to iommu group 4
pci 0000:00:0e.0: Adding to iommu group 5
pci 0000:00:14.0: Adding to iommu group 6
pci 0000:00:14.2: Adding to iommu group 6
pci 0000:00:15.0: Adding to iommu group 7
pci 0000:00:15.1: Adding to iommu group 7
pci 0000:00:16.0: Adding to iommu group 8
pci 0000:00:17.0: Adding to iommu group 9
pci 0000:00:1c.0: Adding to iommu group 10
pci 0000:00:1c.3: Adding to iommu group 11
pci 0000:00:1e.0: Adding to iommu group 12
pci 0000:00:1e.2: Adding to iommu group 12
pci 0000:00:1f.0: Adding to iommu group 13
pci 0000:00:1f.3: Adding to iommu group 13
pci 0000:00:1f.4: Adding to iommu group 13
pci 0000:00:1f.5: Adding to iommu group 13
pci 0000:02:00.0: Adding to iommu group 14
DMAR: Intel(R) Virtualization Technology for Directed I/O
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000006418c000-0x000000006818c000] (64MB)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
clocksource: Switched to clocksource tsc
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 85212K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.3: PME: Signaling with IRQ 123
pcieport 0000:00:1c.3: AER: enabled with IRQ 123
pcieport 0000:00:1c.3: DPC: enabled with IRQ 123
pcieport 0000:00:1c.3: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x4000000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THRM] (66 C)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2024-04-21T22:00:28 UTC (1713736828)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: Microcode Update Driver: v2.2.
resctrl: L2 allocation detected
IPI shorthand broadcast: enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
sched_clock: Marking stable (640002239, 6538947)->(668389295, -21848109)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3936K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (rodata/data gap) memory: 1940K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
    noautomount
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/@/boot/vmlinuz-6.5.0-13parrot1-amd64
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/PNP0C09:01/PNP0C0D:00/input/input1
ACPI: button: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: button: Power Button [PWRF]
ACPI: battery: Slot [BAT0] (battery present)
hid: raw HID events driver (C) Jiri Kosina
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci_bus 10000:e0: root bus resource [bus e0-ff]
pci_bus 10000:e0: root bus resource [mem 0x82000000-0x83ffffff]
pci_bus 10000:e0: root bus resource [mem 0x6003102000-0x60031fffff 64bit]
pci 10000:e0:17.0: [8086:a0d3] type 00 class 0x010601
pci 10000:e0:17.0: reg 0x10: [mem 0x00000000-0x00001fff]
pci 10000:e0:17.0: reg 0x14: [mem 0x00000000-0x000000ff]
pci 10000:e0:17.0: reg 0x18: [io  0x0000-0x0007]
pci 10000:e0:17.0: reg 0x1c: [io  0x0000-0x0003]
pci 10000:e0:17.0: reg 0x20: [io  0x0000-0x001f]
pci 10000:e0:17.0: reg 0x24: [mem 0x82000000-0x820007ff]
pci 10000:e0:17.0: PME# supported from D3hot
pci 10000:e0:17.0: Adding to iommu group 5
pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
pci 10000:e0:1c.0: Adding to iommu group 5
pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
pci 10000:e0:1c.4: Adding to iommu group 5
pci 10000:e0:1c.4: Primary bus is hard wired to 0
pci 10000:e1:00.0: [144d:a809] type 00 class 0x010802
pci 10000:e1:00.0: reg 0x10: [mem 0x82100000-0x82103fff 64bit]
pci 10000:e1:00.0: Adding to iommu group 5
pci 10000:e0:1c.4: PCI bridge to [bus e1]
pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
pci 10000:e0:1c.4:   bridge window [mem 0x82100000-0x821fffff]
pci 10000:e0:1c.4: Primary bus is hard wired to 0
ACPI: bus type drm_connector registered
cryptd: max_cpu_qlen set to 1000
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i2c i2c-0: 2/2 memory slots populated (from DMI)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
idma64 idma64.0: Found Intel integrated DMA 64-bit
xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.0-13parrot1-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.0-13parrot1-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
idma64 idma64.1: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
dw-apb-uart.2: ttyS0 at MMIO 0x4017002000 (irq = 16, base_baud = 6250000) is a 16550A
intel-lpss 0000:00:1e.2: enabling device (0004 -> 0006)
idma64 idma64.3: Found Intel integrated DMA 64-bit
pci 10000:e0:1c.4: BAR 14: assigned [mem 0x82000000-0x820fffff]
pci 10000:e0:17.0: BAR 0: assigned [mem 0x82100000-0x82101fff]
pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
pci 10000:e0:17.0: BAR 5: assigned [mem 0x82102000-0x821027ff]
pci 10000:e0:17.0: BAR 1: assigned [mem 0x82102800-0x821028ff]
pci 10000:e0:17.0: BAR 4: no space for [io  size 0x0020]
pci 10000:e0:17.0: BAR 4: failed to assign [io  size 0x0020]
pci 10000:e0:17.0: BAR 2: no space for [io  size 0x0008]
pci 10000:e0:17.0: BAR 2: failed to assign [io  size 0x0008]
pci 10000:e0:17.0: BAR 3: no space for [io  size 0x0004]
pci 10000:e0:17.0: BAR 3: failed to assign [io  size 0x0004]
pci 10000:e1:00.0: BAR 0: assigned [mem 0x82000000-0x82003fff 64bit]
pci 10000:e0:1c.4: PCI bridge to [bus e1]
pci 10000:e0:1c.4:   bridge window [mem 0x82000000-0x820fffff]
pci 10000:e1:00.0: VMD: Default LTR value set by driver
pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
pcieport 10000:e0:1c.4: PCI INT A: no GSI
pcieport 10000:e0:1c.4: PME: Signaling with IRQ 144
pcieport 10000:e0:1c.4: AER: enabled with IRQ 144
pcieport 10000:e0:1c.4: DPC: enabled with IRQ 144
pcieport 10000:e0:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
vmd 0000:00:0e.0: Bound to PCI domain 10000
i915 0000:00:02.0: [drm] VT-d active for gfx access
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: [drm] Using Transparent Hugepages
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
input: ELAN1200:00 04F3:309F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input5
input: ELAN1200:00 04F3:309F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input6
hid-generic 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00
SCSI subsystem initialized
usb 1-3: new high-speed USB device number 2 using xhci_hcd
libata version 3.00 loaded.
ahci 10000:e0:17.0: version 3.0
ahci 10000:e0:17.0: can't derive routing for PCI INT A
ahci 10000:e0:17.0: PCI INT A: no GSI
ahci 10000:e0:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 10000:e0:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
scsi host0: ahci
scsi host1: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0x82102000 port 0x82102180 irq 146
usb 1-3: New USB device found, idVendor=322e, idProduct=2103, bcdDevice= 1.02
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 HD UVC WebCam
usb 1-3: Manufacturer: Sonix Technology Co., Ltd.
usb 1-6: new full-speed USB device number 3 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
nvme nvme0: pci function 10000:e1:00.0
pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
nvme 10000:e1:00.0: PCI INT A: not connected
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme0: 8/0/0 default/read/poll queues
usb 1-6: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: 2.4G Mouse
 nvme0n1: p1 p2 p3 p4 p5 p6
usb 1-10: new full-speed USB device number 4 using xhci_hcd
usb 1-10: New USB device found, idVendor=13d3, idProduct=3557, bcdDevice= 1.10
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: Bluetooth Radio 
usb 1-10: Manufacturer: Realtek 
usb 1-10: SerialNumber: 00e04c000001
input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1EA7:0064.0002/input/input7
input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1EA7:0064.0002/input/input8
hid-generic 0003:1EA7:0064.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-6/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
raid6: avx512x4 gen() 49261 MB/s
raid6: avx512x2 gen() 53871 MB/s
raid6: avx512x1 gen() 49371 MB/s
raid6: avx2x4   gen() 39182 MB/s
raid6: avx2x2   gen() 40674 MB/s
raid6: avx2x1   gen() 33403 MB/s
raid6: using algorithm avx512x2 gen() 53871 MB/s
raid6: .... xor() 31622 MB/s, rmw enabled
raid6: using avx512x2 recovery algorithm
xor: automatically using best checksumming function   avx       
Btrfs loaded, zoned=yes, fsverity=yes
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
async_tx: api initialized (async)
BTRFS: device fsid 3657fada-b201-4418-b3db-109796a1b987 devid 1 transid 3853 /dev/nvme0n1p6 scanned by btrfs (350)
BTRFS info (device nvme0n1p6): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device nvme0n1p6): using free space tree
BTRFS info (device nvme0n1p6): enabling ssd optimizations
BTRFS info (device nvme0n1p6): auto enabling async discard
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 252.23-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started ntpsec-systemd-netif.path.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target time-set.target - System Time Set.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: Finished blk-availability.service - Availability of block devices.
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
pstore: Using crash dump compression: deflate
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
pstore: Registered efi_pstore as persistent store backend
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
fuse: init (API version 7.38)
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
loop: module loaded
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
BTRFS info (device nvme0n1p6: state M): enabling auto defrag
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
systemd[1]: run-vmblock\x2dfuse.mount - VMware vmblock fuse mount was skipped because of an unmet condition check (ConditionVirtualization=vmware).
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[448]: Received client request to flush runtime journal.
intel_pmc_core INT33A1:00:  initialized
ACPI BIOS Error (bug): Could not resolve symbol [\CTDP], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.IETM.IDSP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20230331/nsprepkg-94)
Consider using thermal netlink events interface
ACPI: AC: AC Adapter [AC0] (on-line)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN1._CRT.S1CT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN1._CRT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN1._HOT.S1HT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN1._HOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN1._PSV.S1PT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN1._PSV due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN1._AC0.S1AT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN1._AC0 due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN2._CRT.S2CT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN2._CRT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN2._HOT.S2HT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN2._HOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN2._PSV.S2PT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN2._PSV due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN2._AC0.S2AT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN2._AC0 due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN3._CRT.S3CT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN3._CRT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN3._HOT.S3HT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN3._HOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN3._PSV.S3PT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN3._PSV due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN4._CRT.S4CT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN4._CRT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN4._HOT.S4HT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN4._HOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN4._PSV.S4PT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN4._PSV due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.EC0.SEN4._AC0.S4AT], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_SB.PC00.LPCB.EC0.SEN4._AC0 due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
EDAC igen6: v2.5.1
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /devices/platform/pcspkr/input/input9
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
input: ELAN1200:00 04F3:309F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input10
input: ELAN1200:00 04F3:309F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input11
hid-multitouch 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00
iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
mc: Linux media interface: v0.10
Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: firmware: direct-loading firmware regulatory.db
platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
caller __uncore_imc_init_box+0xc4/0x140 [intel_uncore] mapping multiple BARs
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
intel_rapl_common: Found RAPL domain package
intel_rapl_msr: PL4 support detected.
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain psys
asus_wmi: ASUS WMI generic driver loaded
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 9.0
asus_wmi: SFUN value: 0x21
asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input12
asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
videodev: Linux video capture interface: v2.00
ACPI: battery: new extension: ASUS Battery Extension
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
usb 1-3: Found UVC 1.00 device USB2.0 HD UVC WebCam (322e:2103)
rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003)
rtw_8821ce 0000:02:00.0: firmware: direct-loading firmware rtw88/rtw8821c_fw.bin
rtw_8821ce 0000:02:00.0: Firmware version 24.11.0, H2C version 12
usbcore: registered new interface driver uvcvideo
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module license taints kernel.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
usbcore: registered new interface driver btusb
rtw_8821ce 0000:02:00.0 wlo1: renamed from wlan0
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
loop0: detected capacity change from 0 to 12864
loop1: detected capacity change from 0 to 113992
loop2: detected capacity change from 0 to 80072
squashfs: version 4.0 (2009/01/31) Phillip Lougher
audit: type=1400 audit(1713736832.366:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=655 comm="apparmor_parser"
audit: type=1400 audit(1713736832.366:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=656 comm="apparmor_parser"
audit: type=1400 audit(1713736832.366:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=656 comm="apparmor_parser"
audit: type=1400 audit(1713736832.366:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1713736832.366:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=658 comm="apparmor_parser"
audit: type=1400 audit(1713736832.366:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1713736832.370:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1713736832.370:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1713736832.370:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=654 comm="apparmor_parser"
Process accounting resumed
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
NET: Registered PF_QIPCRTR protocol family
loop3: detected capacity change from 0 to 8
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
asus_wmi: Unknown key code 0xcf
asus_wmi: Unknown key code 0xcf
show_signal_msg: 58 callbacks suppressed
engrampa[2509]: segfault at 0 ip 0000561db78cecd1 sp 00007ffef913f9e0 error 4 in engrampa[561db78b3000+46000] likely on CPU 2 (core 2, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
engrampa[2690]: segfault at 0 ip 0000561e69ececd1 sp 00007ffe49f710a0 error 4 in engrampa[561e69eb3000+46000] likely on CPU 6 (core 2, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
engrampa[2710]: segfault at 0 ip 000055bea43eccd1 sp 00007ffc7f765ca0 error 4 in engrampa[55bea43d1000+46000] likely on CPU 7 (core 3, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
engrampa[2730]: segfault at 0 ip 0000557015c8ccd1 sp 00007ffcfbc70f00 error 4 in engrampa[557015c71000+46000] likely on CPU 6 (core 2, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
engrampa[2750]: segfault at 0 ip 000056144e7c7cd1 sp 00007fff9061c9d0 error 4 in engrampa[56144e7ac000+46000] likely on CPU 3 (core 3, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
engrampa[7559]: segfault at 0 ip 0000556452807cd1 sp 00007ffd346e0600 error 4 in engrampa[5564527ec000+46000] likely on CPU 4 (core 0, socket 0)
Code: fe ff 85 c0 0f 85 df 00 00 00 e8 5a 2b ff ff 48 8b 3b 31 f6 ba 0a 00 00 00 49 89 c4 e8 78 70 fe ff 49 89 44 24 18 48 8b 43 20  38 2a 0f 85 de 00 00 00 80 78 01 00 0f 85 d4 00 00 00 48 89 df
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
asus_wmi: Unknown key code 0xcf
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
wlo1: authenticate with cc:05:77:6d:d0:cd
wlo1: send auth to cc:05:77:6d:d0:cd (try 1/3)
wlo1: authenticated
wlo1: associate with cc:05:77:6d:d0:cd (try 1/3)
wlo1: RX AssocResp from cc:05:77:6d:d0:cd (capab=0x1431 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by cc:05:77:6d:d0:cd
perf: interrupt took too long (2548 > 2500), lowering kernel.perf_event_max_sample_rate to 78300

Return To yes System Information