dmesg - rk1-rok-emmc
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 5.10.160-rockchip (root@bos03-arm64-003) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #31 SMP Mon Feb 12 15:49:56 UTC 2024
Machine model: Turing Machines RK1
efi: UEFI not found.
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
OF: reserved mem: initialized node cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000007ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000003fbffffff]
node 0: [mem 0x00000003fc000000-0x00000003fc4fffff]
node 0: [mem 0x00000003fc500000-0x00000003ffefffff]
node 0: [mem 0x00000003fff00000-0x00000003ffffffff]
node 0: [mem 0x0000000400000000-0x00000007ffffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000007ffffffff]
On node 0 totalpages: 8322560
DMA zone: 15352 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 982528 pages, LIFO batch:63
Normal zone: 114688 pages used for memmap
Normal zone: 7340032 pages, LIFO batch:63
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s93480 r8192 d29400 u131072
pcpu-alloc: s93480 r8192 d29400 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 8192520
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000e7ce3000-0x00000000ebce3000] (64MB)
Memory: 32265912K/33290240K available (18880K kernel code, 3836K rwdata, 7212K rodata, 7296K init, 671K bss, 762184K reserved, 262144K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 70209 entries in 275 pages
ftrace: allocated 275 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 480 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
ITS [mem 0xfe640000-0xfe65ffff]
ITS@0x00000000fe640000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
ITS [mem 0xfe660000-0xfe67ffff]
ITS@0x00000000fe660000: allocated 8192 Devices @100240000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100250000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000100260000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000100270000
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: msi-controller@fe640000 domain created
Platform MSI: msi-controller@fe660000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000100280000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000100290000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
GICv3: CPU3: using allocated LPI pending table @0x00000001002a0000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
GICv3: CPU4: using allocated LPI pending table @0x00000001002b0000
CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
GICv3: CPU5: using allocated LPI pending table @0x00000001002c0000
CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
GICv3: CPU6: using allocated LPI pending table @0x00000001002d0000
CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
GICv3: CPU7: using allocated LPI pending table @0x00000001002e0000
CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU features: detected: RCpc load-acquire (LDAPR)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
KASLR disabled due to lack of seed
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters, enabled
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
Registered FIQ tty driver
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
ramoops: dmesg-0 0x20000@0x0000000000110000
ramoops: console 0x80000@0x0000000000130000
ramoops: pmsg 0x50000@0x00000000001b0000
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0xf0000@0x110000, ecc: 0
rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
rockchip-pinctrl pinctrl: probed pinctrl
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
raid6: neonx8 gen() 3708 MB/s
raid6: neonx8 xor() 2888 MB/s
raid6: neonx4 gen() 3814 MB/s
raid6: neonx4 xor() 2898 MB/s
raid6: neonx2 gen() 3498 MB/s
raid6: neonx2 xor() 2735 MB/s
raid6: neonx1 gen() 2924 MB/s
raid6: neonx1 xor() 2253 MB/s
raid6: int64x8 gen() 907 MB/s
raid6: int64x8 xor() 593 MB/s
raid6: int64x4 gen() 1116 MB/s
raid6: int64x4 xor() 610 MB/s
raid6: int64x2 gen() 1641 MB/s
raid6: int64x2 xor() 900 MB/s
raid6: int64x1 gen() 1364 MB/s
raid6: int64x1 xor() 666 MB/s
raid6: using algorithm neonx4 gen() 3814 MB/s
raid6: .... xor() 2898 MB/s, rmw enabled
raid6: using neon recovery algorithm
fiq_debugger fiq_debugger.0: IRQ fiq not found
fiq_debugger fiq_debugger.0: IRQ wakeup not found
fiq_debugger_probe: could not install nmi irq handler
printk: console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0
vcc12v_dcin: 12000 mV, enabled
reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
vcc5v0_sys: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.2: -ENOENT
vcc5v0_sys: 5000 mV, enabled
reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
reg-fixed-voltage vcc5v0-usbdcin: Looking up vin-supply from device tree
vcc5v0_usbdcin: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.3: -ENOENT
vcc5v0_usbdcin: 5000 mV, enabled
reg-fixed-voltage vcc5v0-usbdcin: vcc5v0_usbdcin supplying 5000000uV
reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
vcc5v0_usb: supplied by vcc5v0_usbdcin
vcc5v0_usbdcin: could not add device link regulator.4: -ENOENT
vcc5v0_usb: 5000 mV, enabled
reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
vcc_1v1_nldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.5: -ENOENT
vcc_1v1_nldo_s3: 1100 mV, enabled
reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
vcc3v3_pcie30: 3300 mV, disabled
reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
vcc3v3_pcie30: supplied by vcc12v_dcin
reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
reg-fixed-voltage vcc5v0-host: Looking up vin-supply from device tree
vcc5v0_host: supplied by vcc5v0_usb
vcc5v0_usb: could not add device link regulator.7: -ENOENT
vcc5v0_host: 5000 mV, enabled
reg-fixed-voltage vcc5v0-host: vcc5v0_host supplying 5000000uV
iommu: Default domain type: Translated
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
rockchip-cpuinfo cpuinfo: SoC : 35881000
rockchip-cpuinfo cpuinfo: Serial : c8d9d14c60632980
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 655360 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14980K
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=23 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
ntfs: driver 2.1.32 [Flags: R/W].
NET: Registered protocol family 38
xor: measuring software checksum speed
8regs : 4262 MB/sec
32regs : 5668 MB/sec
arm64_neon : 6956 MB/sec
xor: using function: arm64_neon (6956 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d4000.syscon:[email protected]: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fd5d4000.syscon:[email protected]: -ENOENT
phy phy-fd5d4000.syscon:[email protected]: Looking up vbus-supply from device tree
phy phy-fd5d4000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
phy phy-fee20000.phy.2: Looking up phy-supply from device tree
phy phy-fee20000.phy.2: Looking up phy-supply property in node /phy@fee20000 failed
phy phy-feda0000.phy.3: Looking up phy-supply from device tree
phy phy-feda0000.phy.3: Looking up phy-supply property in node /phy@feda0000 failed
phy phy-fedb0000.phy.4: Looking up phy-supply from device tree
phy phy-fedb0000.phy.4: Looking up phy-supply property in node /phy@fedb0000 failed
phy phy-fed60000.hdmiphy.5: Looking up phy-supply from device tree
phy phy-fed60000.hdmiphy.5: Looking up phy-supply property in node /hdmiphy@fed60000 failed
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
phy phy-fee80000.phy.6: Looking up phy-supply from device tree
phy phy-fee80000.phy.6: Looking up phy-supply property in node /phy@fee80000 failed
phy phy-fed80000.phy.7: Looking up phy-supply from device tree
phy phy-fed80000.phy.7: Looking up phy-supply property in node /phy@fed80000/dp-port failed
phy phy-fed80000.phy.8: Looking up phy-supply from device tree
phy phy-fed80000.phy.8: Looking up phy-supply property in node /phy@fed80000/u3-port failed
phy phy-fed90000.phy.9: Looking up phy-supply from device tree
phy phy-fed90000.phy.9: Looking up phy-supply property in node /phy@fed90000/dp-port failed
phy phy-fed90000.phy.10: Looking up phy-supply from device tree
phy phy-fed90000.phy.10: Looking up phy-supply property in node /phy@fed90000/u3-port failed
rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
rk-pcie fe180000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe180000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe180000 failed
rk-pcie fe180000.pcie: no vpcie3v3 regulator found
rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
iep: Module initialized.
rk-pcie fe180000.pcie: IRQ msi not found
mpp_service mpp-srv: unknown mpp version for missing VCS info
mpp_service mpp-srv: probe start
rk-pcie fe180000.pcie: use outband MSI support
rk-pcie fe180000.pcie: Missing *config* reg space
rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
rk-pcie fe180000.pcie: err 0x00f3000000..0x00f30fffff -> 0x00f3000000
rk-pcie fe180000.pcie: IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
rk-pcie fe180000.pcie: MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
rk-pcie fe180000.pcie: MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
rk-pcie fe180000.pcie: Missing *config* reg space
rk-pcie fe180000.pcie: invalid resource
mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
mpp_vdpu2 fdb50400.vdpu: probe device
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: probing finish
mpp_vepu2 jpege-ccu: probing start
mpp_vepu2 jpege-ccu: probing finish
mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
mpp_vepu2 fdb50000.vepu: probing start
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: probing finish
mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
mpp_vepu2 fdba0000.jpege-core: probing start
mpp_vepu2 fdba0000.jpege-core: attach ccu success
mpp_vepu2 fdba0000.jpege-core: probing finish
mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
mpp_vepu2 fdba4000.jpege-core: probing start
rk-pcie fe150000.pcie: IRQ msi not found
rk-pcie fe150000.pcie: use outband MSI support
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000
rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
mpp_vepu2 fdba4000.jpege-core: attach ccu success
rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: invalid resource
mpp_vepu2 fdba4000.jpege-core: probing finish
mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
mpp_vepu2 fdba8000.jpege-core: probing start
mpp_vepu2 fdba8000.jpege-core: attach ccu success
mpp_vepu2 fdba8000.jpege-core: probing finish
mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
mpp_vepu2 fdbac000.jpege-core: probing start
mpp_vepu2 fdbac000.jpege-core: attach ccu success
mpp_vepu2 fdbac000.jpege-core: probing finish
mpp-iep2 fdbb0000.iep: Adding to iommu group 9
mpp-iep2 fdbb0000.iep: probe device
mpp-iep2 fdbb0000.iep: allocate roi buffer failed
mpp-iep2 fdbb0000.iep: probing finish
mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
mpp_jpgdec fdb90000.jpegd: probe device
mpp_jpgdec fdb90000.jpegd: probing finish
mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
mpp_rkvenc2 rkvenc-ccu: probing start
mpp_rkvenc2 rkvenc-ccu: probing finish
mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbd0000 failed
mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbe0000 failed
mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
mpp_av1dec: Adding child /av1d@fdc70000
mpp_av1dec: register device av1d-master
mpp_av1dec av1d-master: av1_iommu_of_xlate,784
av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
mpp_av1dec av1d-master: Adding to iommu group 15
mpp_av1dec av1d-master: probing start
mpp_av1dec av1d-master: probing finish
mpp_service mpp-srv: probe success
dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-pvtm fda40000.pvtm: pvtm@0 probed
rockchip-pvtm fda50000.pvtm: pvtm@1 probed
rockchip-pvtm fda60000.pvtm: pvtm@2 probed
rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
rockchip-system-monitor rockchip-system-monitor: system monitor probe
rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
printk: console [ttyS9] enabled
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x3
random: crng init done
led_vk2c21_init
=============================================
rockchip-vop2 fdd90000.vop: Adding to iommu group 14
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 0
rk-pcie fe180000.pcie: PCIe Link up, LTSSM is 0x30011
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 6
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 7
rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x230011
rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-0f]
pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0]
pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])
pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]
pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400
pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
rk-pcie fe180000.pcie: PCI host bridge to bus 0001:30
pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
pci 0000:01:00.0: [1344:5416] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart0-win0 as cursor plane for vp0
pci_bus 0001:30: root bus resource [bus 30-3f]
pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart1-win0 as cursor plane for vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart2-win0 as cursor plane for vp2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart3-win0 as cursor plane for vp3
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
pci_bus 0001:30: root bus resource [??? 0xf3000000-0xf30fffff flags 0x0]
pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref]
pci_bus 0001:30: root bus resource [io 0x0000-0xfffff] (bus address [0xf3100000-0xf31fffff])
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffff8000093b3040)
dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffff8000093c12c8)
rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffff8000093c3ed0)
rockchip-drm display-subsystem: failed to parse loader memory
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
dwhdmi-rockchip fde80000.hdmi: failed to get edid
pci 0000:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0001:30: root bus resource [mem 0xf3200000-0xf3ffffff]
pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff]
pcieport 0000:00:00.0: PME: Signaling with IRQ 122
pci_bus 0001:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref]
pci 0001:30:00.0: [1d87:3588] type 01 class 0x060400
dw-dp fde50000.dp: aux failed to read dpcd: -110
pci 0001:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:30:00.0: supports D1 D2
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:30:00.0: PME# supported from D0 D1 D3hot
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:30:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: [1b21:0611] type 00 class 0x010185
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: reg 0x10: [io size 0x0008]
pci 0001:31:00.0: reg 0x14: initial BAR value 0x00000000 invalid
dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
pci 0001:31:00.0: reg 0x14: [io size 0x0004]
dwhdmi-rockchip fde80000.hdmi: failed to get edid
pci 0001:31:00.0: reg 0x18: initial BAR value 0x00000000 invalid
dw-dp fde50000.dp: aux failed to read dpcd: -110
pci 0001:31:00.0: reg 0x18: [io size 0x0008]
dwhdmi-rockchip fde80000.hdmi: use tmds mode
pci 0001:31:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
pci 0001:31:00.0: reg 0x1c: [io size 0x0004]
pci 0001:31:00.0: reg 0x20: initial BAR value 0x00000000 invalid
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
pci 0001:31:00.0: reg 0x20: [io size 0x0010]
pci 0001:31:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
pci 0001:31:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
pci 0001:31:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:30:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
pci_bus 0001:31: busn_res: [bus 31-3f] end is updated to 31
dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
pci 0001:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
pci 0001:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
pci 0001:30:00.0: BAR 7: assigned [io 0x1000-0x1fff]
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
pci 0001:31:00.0: BAR 6: assigned [mem 0xf3200000-0xf320ffff pref]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: BAR 5: assigned [mem 0xf3210000-0xf32101ff]
pci 0001:31:00.0: BAR 4: assigned [io 0x1000-0x100f]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: BAR 0: assigned [io 0x1010-0x1017]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: BAR 2: assigned [io 0x1018-0x101f]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: BAR 1: assigned [io 0x1020-0x1023]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:31:00.0: BAR 3: assigned [io 0x1024-0x1027]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:30:00.0: PCI bridge to [bus 31]
dwhdmi-rockchip fde80000.hdmi: i2c read err!
pci 0001:30:00.0: bridge window [io 0x1000-0x1fff]
pci 0001:30:00.0: bridge window [mem 0xf3200000-0xf32fffff]
dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
pcieport 0001:30:00.0: PME: Signaling with IRQ 132
dwhdmi-rockchip fde80000.hdmi: failed to get edid
dw-dp fde50000.dp: aux failed to read dpcd: -110
Console: switching to colour frame buffer device 240x67
rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.2.auto: dw_hdcp_qp_hdcp_probe success
brd: module loaded
loop: module loaded
rbd: loaded (major 254)
lkdtm: No crash points registered, enable through debugfs
system_heap: orders[0] = 6
system_heap: orders[1] = 4
system_heap: orders[2] = 0
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
ahci 0001:31:00.0: version 3.0
ahci 0001:31:00.0: enabling device (0000 -> 0003)
ahci 0001:31:00.0: SSS flag set, parallel bus scan disabled
ahci 0001:31:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0001:31:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m512@0xf3210000 port 0xf3210100 irq 134
ata2: SATA max UDMA/133 abar m512@0xf3210000 port 0xf3210180 irq 134
rockchip-spi feb20000.spi: no high_speed pinctrl state
rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
rk806 spi2.0: ON: 0x40 OFF:0x0
rk806-regulator rk806-regulator.6.auto: Looking up vcc1-supply from device tree
vdd_gpu_s0: supplied by vcc5v0_sys
nvme nvme0: allocated 64 MiB host memory buffer.
vcc5v0_sys: could not add device link regulator.8: -ENOENT
vdd_gpu_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc2-supply from device tree
vdd_cpu_lit_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.9: -ENOENT
vdd_cpu_lit_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc3-supply from device tree
vdd_log_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.10: -ENOENT
vdd_log_s0: 675 750 mV at 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc4-supply from device tree
vdd_vdenc_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.11: -ENOENT
vdd_vdenc_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc5-supply from device tree
vdd_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.12: -ENOENT
vdd_ddr_s0: 675 900 mV at 850 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc6-supply from device tree
vdd2_ddr_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.13: -ENOENT
vdd2_ddr_s3: at 500 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc7-supply from device tree
vdd_2v0_pldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.14: -ENOENT
vdd_2v0_pldo_s3: 2000 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc8-supply from device tree
vcc_3v3_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.15: -ENOENT
vcc_3v3_s3: 3300 mV, enabled
nvme nvme0: 8/0/0 default/read/poll queues
rk806-regulator rk806-regulator.6.auto: Looking up vcc9-supply from device tree
vddq_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.16: -ENOENT
vddq_ddr_s0: at 500 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc10-supply from device tree
vcc_1v8_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.17: -ENOENT
vcc_1v8_s3: 1800 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc13-supply from device tree
vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.18: -ENOENT
vdd_0v75_s3: 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc13-supply from device tree
vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.19: -ENOENT
vdd_ddr_pll_s0: 850 mV, enabled
avdd_0v75_s0: Bringing 750000uV into 837500-837500uV
avdd_0v75_s0: ramp_delay not set
rk806-regulator rk806-regulator.6.auto: Looking up vcc13-supply from device tree
avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.20: -ENOENT
avdd_0v75_s0: 837 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc14-supply from device tree
vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.21: -ENOENT
vdd_0v85_s0: 850 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc14-supply from device tree
vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.22: -ENOENT
vdd_0v75_s0: 750 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc11-supply from device tree
avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.23: -ENOENT
avcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc11-supply from device tree
vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.24: -ENOENT
vcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc11-supply from device tree
avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.25: -ENOENT
avdd_1v2_s0: 1200 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc12-supply from device tree
vcc_3v3_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.26: -ENOENT
vcc_3v3_s0: 3300 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcc12-supply from device tree
vccio_sd_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.27: -ENOENT
vccio_sd_s0: 1800 3300 mV at 3300 mV, enabled
rk806-regulator rk806-regulator.6.auto: Looking up vcca-supply from device tree
pldo6_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.28: -ENOENT
pldo6_s3: 1800 mV, enabled
rk806 spi2.0: no sleep-setting state
rk806 spi2.0: no reset-setting pinctrl state
rk806 spi2.0: no dvs-setting pinctrl state
rockchip-spi feb20000.spi: register misc device rkspi-dev2
rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree
rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed
rk_gmac-dwmac fe1c0000.ethernet: no regulator found
rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
rk_gmac-dwmac fe1c0000.ethernet: RX delay(0x0).
rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
ata1: SATA link down (SStatus 0 SControl 300)
rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5
rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe1c0000.ethernet: TSO supported
rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
usbcore: registered new interface driver rndis_wlan
=======================================================
==== Launching Wi-Fi driver! (Powered by Rockchip) ====
=======================================================
Realtek 8821CS SDIO WiFi driver (Powered by Rockchip,Ver v5.14.2-28-g6011b0372.20220328) init.
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
RTW: module init start
RTW: rtl8821cs v5.14.2-28-g6011b0372.20220328
RTW: build time: Feb 12 2024 14:59:09
ata2: SATA link down (SStatus 0 SControl 300)
RTW: rtl8821cs BT-Coex version = COEX20210319-5555
RTW: module init ret=0
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002010010
xhci-hcd xhci-hcd.7.auto: irq 147, io mem 0xfc000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb1: SerialNumber: xhci-hcd.7.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.7.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb2: SerialNumber: xhci-hcd.7.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
phy phy-fd5d4000.syscon:[email protected]: illegal mode
xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
xhci-hcd xhci-hcd.8.auto: irq 148, io mem 0xfc400000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb3: SerialNumber: xhci-hcd.8.auto
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb4: SerialNumber: xhci-hcd.8.auto
hub 4-0:1.0: USB hub found
hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
Error: Driver 'Goodix-TS' is already registered, aborting...
usbcore: registered new interface driver usbtouchscreen
input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.5.auto/input/input0
i2c /dev entries driver
rk860-regulator 0-0042: Looking up vin-supply from device tree
vdd_cpu_big0_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.29: -ENOENT
vdd_cpu_big0_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 0-0043: Looking up vin-supply from device tree
vdd_cpu_big1_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.30: -ENOENT
vdd_cpu_big1_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 1-0042: Looking up vin-supply from device tree
vdd_npu_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.31: -ENOENT
vdd_npu_s0: 550 950 mV at 800 mV, enabled
rtc-hym8563 6-0051: rtc information is invalid
rtc-hym8563 6-0051: registered as rtc0
rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400)
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: bin=0
cpu cpu0: leakage=14
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: pvtm=1519
cpu cpu0: pvtm-volt-sel=5
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Looking up mem-supply from device tree
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: bin=0
cpu cpu4: leakage=12
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: pvtm=1762
cpu cpu4: pvtm-volt-sel=6
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: Looking up mem-supply from device tree
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: bin=0
cpu cpu6: leakage=12
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: pvtm=1767
cpu cpu6: pvtm-volt-sel=6
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: Looking up mem-supply from device tree
cpu cpu0: avs=0
cpu cpu4: avs=0
cpu cpu6: avs=0
cpu cpu0: EM: OPP:816000 is inefficient
cpu cpu0: EM: OPP:600000 is inefficient
cpu cpu0: EM: created perf domain
cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
cpu cpu4: EM: OPP:1200000 is inefficient
cpu cpu4: EM: OPP:816000 is inefficient
cpu cpu4: EM: OPP:600000 is inefficient
cpu cpu4: EM: created perf domain
cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
cpu cpu6: EM: OPP:1200000 is inefficient
cpu cpu6: EM: OPP:816000 is inefficient
cpu cpu6: EM: OPP:600000 is inefficient
cpu cpu6: EM: created perf domain
cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
ledtrig-cpu: registered to indicate activity on CPUs
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
cryptodev: driver 1.12 loaded.
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
usbhid: USB HID core driver
ashmem: initialized
rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
optee: probing for conduit method.
optee: api uid mismatch
optee: probe of firmware:optee failed with error -22
usbcore: registered new interface driver snd-usb-audio
[Awinic] aw87xxx_pa_init:driver version: v2.2.0
rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
mmc0: Host Software Queue enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
debugfs: File 'Capture' in directory 'dapm' already present!
mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB, chardev (237:0)
input: rockchip-dp0 rockchip-dp0 as /devices/platform/dp0-sound/sound/card1/input2
mmcblk0: p1 p2
Initializing XFRM netlink socket
NET: Registered protocol family 17
[BT_RFKILL]: Enter rfkill_rk_init
[WLAN_RFKILL]: Enter rfkill_wlan_init
Key type dns_resolver registered
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
registered taskstats version 1
vendor storage:20190527 ret = 0
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
pstore: Using crash dump compression: deflate
rga3_core0 fdb60000.rga: Adding to iommu group 2
rga: rga3_core0, irq = 29, match scheduler
rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core0 probe successfully
rga3_core1 fdb70000.rga: Adding to iommu group 3
rga: rga3_core1, irq = 30, match scheduler
rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core1 probe successfully
rga: rga2, irq = 31, match scheduler
rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
rga: rga2 probe successfully
rga_iommu: IOMMU binding successfully, default mapping core[0x1]
rga: Module initialized. v1.3.0
reg-fixed-voltage pcie20-avdd0v85: Looking up vin-supply from device tree
pcie20_avdd0v85: supplied by vdd_0v85_s0
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
vdd_0v85_s0: could not add device link regulator.32: -ENOENT
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
mali fb000000.gpu: Kernel DDK version g18p0-01eac0
pcie20_avdd0v85: 850 mV, enabled
reg-fixed-voltage pcie20-avdd0v85: pcie20_avdd0v85 supplying 850000uV
mali fb000000.gpu: Looking up mali-supply from device tree
reg-fixed-voltage pcie20-avdd1v8: Looking up vin-supply from device tree
pcie20_avdd1v8: supplied by avcc_1v8_s0
mali fb000000.gpu: Looking up mem-supply from device tree
avcc_1v8_s0: could not add device link regulator.33: -ENOENT
pcie20_avdd1v8: 1800 mV, enabled
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
mali fb000000.gpu: Looking up mem-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
reg-fixed-voltage pcie20-avdd1v8: pcie20_avdd1v8 supplying 1800000uV
mali fb000000.gpu: Looking up mali-supply from device tree
reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
pcie30_avdd0v75: supplied by avdd_0v75_s0
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
avdd_0v75_s0: could not add device link regulator.34: -ENOENT
vdd_gpu_s0: Failed to create debugfs directory
pcie30_avdd0v75: 750 mV, enabled
reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
mali fb000000.gpu: bin=0
reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
pcie30_avdd1v8: supplied by avcc_1v8_s0
mali fb000000.gpu: leakage=24
avcc_1v8_s0: could not add device link regulator.35: -ENOENT
mali fb000000.gpu: Looking up mali-supply from device tree
debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
pcie30_avdd1v8: 1800 mV, enabled
reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
rockchip-dmc dmc: Looking up center-supply from device tree
rockchip-dmc dmc: Looking up mem-supply from device tree
rockchip-dmc dmc: Looking up center-supply from device tree
vdd_ddr_s0: could not add device link dmc: -EEXIST
vdd_ddr_s0: Failed to create debugfs directory
mali fb000000.gpu: pvtm=932
rockchip-dmc dmc: Looking up mem-supply from device tree
vdd_log_s0: could not add device link dmc: -EEXIST
vdd_log_s0: Failed to create debugfs directory
mali fb000000.gpu: pvtm-volt-sel=5
rockchip-dmc dmc: bin=0
mali fb000000.gpu: avs=0
rockchip-dmc dmc: leakage=51
W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
rockchip-dmc dmc: leakage-volt-sel=2
mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
rockchip-dmc dmc: soc version=0, speed=2
mali fb000000.gpu: falling back to closest match: r0p0 status 0
mali fb000000.gpu: Execution proceeding normally with fallback match
mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
rockchip-dmc dmc: avs=0
mali fb000000.gpu: No priority control manager is configured
rockchip-dmc dmc: current ATF version 0x100
mali fb000000.gpu: No memory group manager is configured
rockchip-dmc dmc: normal_rate = 1560000000
mali fb000000.gpu: Protected memory allocator not available
rockchip-dmc dmc: reboot_rate = 2112000000
rockchip-dmc dmc: suspend_rate = 528000000
rockchip-dmc dmc: video_4k_rate = 1560000000
rockchip-dmc dmc: video_4k_10b_rate = 1560000000
rockchip-dmc dmc: video_svep_rate = 1560000000
rockchip-dmc dmc: boost_rate = 2112000000
rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
rockchip-dmc dmc: performance_rate = 2112000000
rockchip-dmc dmc: hdmirx_rate = 2112000000
rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
rockchip-dmc dmc: failed to get vop pn to msch rl
rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
devfreq fb000000.gpu: dvfs failed with (-22) error
mali fb000000.gpu: Probed as mali0
rockchip-dmc dmc: could not find power_model node
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Adding to iommu group 0
RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
RKNPU fdab0000.npu: Looking up mem-supply from device tree
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[drm] Initialized rknpu 0.9.2 20230825 for fdab0000.npu on minor 1
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up mem-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: RKNPU: bin=0
RKNPU fdab0000.npu: leakage=13
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
RKNPU fdab0000.npu: pvtm=934
RKNPU fdab0000.npu: pvtm-volt-sel=5
RKNPU fdab0000.npu: avs=0
RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
RKNPU fdab0000.npu: failed to find power_model node
RKNPU fdab0000.npu: RKNPU: failed to initialize power model
RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '14:59:09', on 'Feb 12 2024'.
Mali:
Mali device driver loaded
ALSA device list:
#0: rockchip-hdmi0
#1: rockchip-dp0
Freeing unused kernel memory: 7296K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
cgroup_enable=memory
cgroup_memory=1
async_tx: api initialized (async)
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to .
systemd[1]: Condition check resulted in Root Slice being skipped.
systemd[1]: Condition check resulted in System Slice being skipped.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/serial-getty.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice Slice /system/systemd-growfs.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Reached target Mounted snaps.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Restore / save the current clock...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in LXD - agent being skipped.
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
fuse: init (API version 7.32)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
systemd[1]: Started Journal Service.
device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: [email protected]
systemd-journald[437]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0p2): resizing filesystem from 7498747 to 7498747 blocks
systemd-journald[437]: File /var/log/journal/57fd30a541fe4760b5bd11367c288255/system.journal corrupted or uncleanly shut down, renaming and replacing.
pwm-fan pwm-fan: Looking up fan-supply from device tree
FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Adding 1048572k swap on /swapfile. Priority:-2 extents:5 across:3170300k SS
phy_rtl8211f_led_fixup in
phy_rtl8211f_led_fixup in val=0x0a42
rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
dwmac4: Master AXI performs any burst length
rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
Process accounting resumed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
perf: interrupt took too long (3134 > 3126), lowering kernel.perf_event_max_sample_rate to 63600
perf: interrupt took too long (3948 > 3917), lowering kernel.perf_event_max_sample_rate to 50400
perf: interrupt took too long (4940 > 4935), lowering kernel.perf_event_max_sample_rate to 40200