Xorg.0.log - baseline
(--) Log file renamed from "/var/log/Xorg.pid-4559.log" to "/var/log/Xorg.0.log"
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux m1904 6.4.12-1-cachyos-tt-lto #1 SMP PREEMPT_DYNAMIC Wed, 23 Aug 2023 19:24:42 +0000 x86_64
Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-cachyos-tt-lto.img zfs=zpcachyos/ROOT/cos/root rw zswap.enabled=0 nowatchdog
Current version of pixman: 0.42.2
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 23 23:50:42 2023
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Automatically binding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/misc" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/TTF").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/OTF").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 25.2
X.Org XInput driver : 24.4
X.Org Server Extension : 10.0
(++) using VT number 2
(II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
(II) xfree86: Adding drm device (/dev/dri/card1)
(II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
(II) xfree86: Adding drm device (/dev/dri/card0)
(II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
(**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
(--) PCI:*(0@0:2:0) 8086:a780:1458:d000 rev 4, Mem @ 0x41000000/16777216, 0x50000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
(--) PCI: (1@0:0:0) 10de:2489:3842:4667 rev 161, Mem @ 0x42000000/16777216, 0x60000000/268435456, 0x70000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.21.1.8, module version = 1.0.0
ABI class: X.Org Server Extension, version 10.0
(II) Applying OutputClass "nvidia" to /dev/dri/card1
loading driver: nvidia
(==) Matched intel as autoconfigured driver 0
(==) Matched nvidia as autoconfigured driver 1
(==) Matched nouveau as autoconfigured driver 2
(==) Matched nv as autoconfigured driver 3
(==) Matched modesetting as autoconfigured driver 4
(==) Matched fbdev as autoconfigured driver 5
(==) Matched vesa as autoconfigured driver 6
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(WW) Warning, couldn't open module intel
(EE) Failed to load module "intel" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 1.6.99.901, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(EE) Failed to load module "nouveau" (module does not exist, 0)
(II) LoadModule: "nv"
(WW) Warning, couldn't open module nv
(EE) Failed to load module "nv" (module does not exist, 0)
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
compiled for 1.21.1.8, module version = 1.21.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 25.2
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) NVIDIA dlloader X Driver 535.104.05 Sat Aug 19 01:01:11 UTC 2023
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) modesetting: Driver for Modesetting Kernel Drivers: kms
(II) modeset(0): using drv /dev/dri/card0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Module "fb" already built-in
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.21.1.8, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) modeset(0): Depth 24, (==) framebuffer bpp 32
(==) modeset(0): RGB weight 888
(==) modeset(0): Default visual is TrueColor
(II) Loading sub module "glamoregl"
(II) LoadModule: "glamoregl"
(II) Loading /usr/lib/xorg/modules/libglamoregl.so
(II) Module glamoregl: vendor="X.Org Foundation"
compiled for 1.21.1.8, module version = 1.0.1
ABI class: X.Org ANSI C Emulation, version 0.4
(II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (RPL-S)
(II) modeset(0): glamor initialized
(==) modeset(0): VariableRefresh: disabled
(==) modeset(0): AsyncFlipSecondaries: disabled
(II) modeset(0): Output DP-1 has no monitor section
(II) modeset(0): Output HDMI-1 has no monitor section
(II) modeset(0): EDID for output DP-1
(II) modeset(0): Manufacturer: DEL Model: d107 Serial#: 843465558
(II) modeset(0): Year: 2021 Week: 24
(II) modeset(0): EDID Version: 1.4
(II) modeset(0): Digital Display Input
(II) modeset(0): 10 bits per channel
(II) modeset(0): Digital interface is DisplayPort
(II) modeset(0): Max Image Size [cm]: horiz.: 70 vert.: 40
(II) modeset(0): Gamma: 2.20
(II) modeset(0): DPMS capabilities: StandBy Suspend Off
(II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
(II) modeset(0): First detailed timing is preferred mode
(II) modeset(0): Preferred mode is native pixel format and refresh rate
(II) modeset(0): Display is continuous-frequency
(II) modeset(0): redX: 0.676 redY: 0.312 greenX: 0.276 greenY: 0.656
(II) modeset(0): blueX: 0.153 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
(II) modeset(0): Supported established timings:
(II) modeset(0): 720x400@70Hz
(II) modeset(0): 640x480@60Hz
(II) modeset(0): 640x480@75Hz
(II) modeset(0): 800x600@60Hz
(II) modeset(0): 800x600@75Hz
(II) modeset(0): 1024x768@60Hz
(II) modeset(0): 1024x768@75Hz
(II) modeset(0): 1280x1024@75Hz
(II) modeset(0): Manufacturer's mask: 0
(II) modeset(0): Supported standard timings:
(II) modeset(0): #0: hsize: 1600 vsize 900 refresh: 60 vid: 49321
(II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) modeset(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
(II) modeset(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) modeset(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) modeset(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) modeset(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
(II) modeset(0): Supported detailed timing:
(II) modeset(0): clock: 533.2 MHz Image Size: 697 x 392 mm
(II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
(II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
(II) modeset(0): Monitor name: DELL S3221QS
(II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 140 H max: 140 kHz, PixClock max 605 MHz
(II) modeset(0): Supported detailed timing:
(II) modeset(0): clock: 241.5 MHz Image Size: 697 x 392 mm
(II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
(II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
(II) modeset(0): Supported detailed timing:
(II) modeset(0): clock: 148.5 MHz Image Size: 697 x 392 mm
(II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) modeset(0): Supported detailed timing:
(II) modeset(0): clock: 433.4 MHz Image Size: 697 x 392 mm
(II) modeset(0): h_active: 3840 h_sync: 3848 h_sync_end 3880 h_blank_end 3920 h_border: 0
(II) modeset(0): v_active: 2160 v_sync: 2197 v_sync_end 2205 v_blanking: 2211 v_border: 0
(II) modeset(0): Stereo: left channel on sync
side-by-side interleaved(II) modeset(0): Number of EDID sections to follow: 1
(II) modeset(0): EDID (in hex):
(II) modeset(0): 00ffffffffffff0010ac07d156434632
(II) modeset(0): 181f0104b5462878fb3c55ad4f46a827
(II) modeset(0): 115054a54b00a9c0b300d100714fa940
(II) modeset(0): 8180d1c001014dd000a0f0703e803020
(II) modeset(0): 3500b9882100001a000000ff0031515a
(II) modeset(0): 515442330a2020202020000000fc0044
(II) modeset(0): 454c4c20533332323151530a000000fd
(II) modeset(0): 00283c8c8c3c010a202020202020011c
(II) modeset(0): 020332f154e105040302071601061112
(II) modeset(0): 1513141f105d5e5f6023090707830100
(II) modeset(0): 0065030c001000e305c000e606050152
(II) modeset(0): 522c565e00a0a0a0295030203500b988
(II) modeset(0): 2100001a023a801871382d40582c4500
(II) modeset(0): b9882100001e47a90050f07033800820
(II) modeset(0): 5808b988210000ff0000000000000000
(II) modeset(0): 00000000000000000000000000000040
(II) modeset(0): Printing probed modes for output DP-1
(II) modeset(0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
(II) modeset(0): Modeline "3840x2160"x50.0 594.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (112.5 kHz e)
(II) modeset(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
(II) modeset(0): Modeline "3840x2160"x25.0 297.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
(II) modeset(0): Modeline "3840x2160"x24.0 297.00 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
(II) modeset(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
(II) modeset(0): Modeline "3840x2160"x24.0 296.70 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
(II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
(II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
(II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
(II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
(II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
(II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
(II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
(II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
(II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
(II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
(II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
(II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
(II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
(II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
(II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
(II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
(II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
(II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
(II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
(II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
(II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) modeset(0): EDID for output HDMI-1
(II) modeset(0): Output DP-1 connected
(II) modeset(0): Output HDMI-1 disconnected
(II) modeset(0): Using exact sizes for initial modes
(II) modeset(0): Output DP-1 using initial mode 3840x2160 +0+0
(==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
(==) modeset(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Module "fb" already built-in
(==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(G0): RGB weight 888
(==) NVIDIA(G0): Default visual is TrueColor
(==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
(II) Applying OutputClass "nvidia" options to /dev/dri/card1
(**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
(**) NVIDIA(G0): Enabling 2D acceleration
(II) Loading sub module "glxserver_nvidia"
(II) LoadModule: "glxserver_nvidia"
(II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
(II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
compiled for 1.6.99.901, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 535.104.05 Sat Aug 19 01:06:04 UTC 2023
(II) NVIDIA: The X server supports PRIME Render Offload.
(--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
(--) NVIDIA(0): DFP-0 (boot)
(--) NVIDIA(0): DFP-1
(--) NVIDIA(0): DFP-2
(--) NVIDIA(0): DFP-3
(--) NVIDIA(0): DFP-4
(--) NVIDIA(0): DFP-5
(--) NVIDIA(0): DFP-6
(II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 3060 Ti (GA104-A) at PCI:1:0:0
(II) NVIDIA(G0): (GPU-0)
(--) NVIDIA(G0): Memory: 8388608 kBytes
(--) NVIDIA(G0): VideoBIOS: 94.04.6b.00.9a
(II) NVIDIA(G0): Detected PCI Express Link width: 16X
(--) NVIDIA(GPU-0): DELL P2419H (DFP-0): connected
(--) NVIDIA(GPU-0): DELL P2419H (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): DELL P2419H (DFP-0): 600.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-1: disconnected
(--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal TMDS
(--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-5: disconnected
(--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(--) NVIDIA(GPU-0): DFP-6: disconnected
(--) NVIDIA(GPU-0): DFP-6: Internal TMDS
(--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0):
(II) NVIDIA(G0): Validated MetaModes:
(II) NVIDIA(G0): "NULL"
(II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(G0): Cannot find size of first mode for DELL P2419H (DFP-0); cannot
(WW) NVIDIA(G0): compute DPI from DELL P2419H (DFP-0)'s EDID.
(==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
(==) modeset(0): Backing store enabled
(==) modeset(0): Silken mouse enabled
(II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
(==) modeset(0): DPMS enabled
(II) modeset(0): [DRI2] Setup complete
(II) modeset(0): [DRI2] DRI driver: iris
(II) modeset(0): [DRI2] VDPAU driver: va_gl
(II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
(II) NVIDIA: access.
(II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(G0): configuration option may not be set correctly. When the
(II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(G0): Config Options in the README.
(II) NVIDIA(G0): Setting mode "NULL"
(==) NVIDIA(G0): Disabling shared memory pixmaps
(==) NVIDIA(G0): Backing store enabled
(==) NVIDIA(G0): Silken mouse enabled
(==) NVIDIA(G0): DPMS enabled
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(II) NVIDIA(G0): [DRI2] Setup complete
(II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
(II) Initializing extension Generic Event Extension
(II) Initializing extension SHAPE
(II) Initializing extension MIT-SHM
(II) Initializing extension XInputExtension
(II) Initializing extension XTEST
(II) Initializing extension BIG-REQUESTS
(II) Initializing extension SYNC
(II) Initializing extension XKEYBOARD
(II) Initializing extension XC-MISC
(II) Initializing extension SECURITY
(II) Initializing extension XFIXES
(II) Initializing extension RENDER
(II) Initializing extension RANDR
(II) Initializing extension COMPOSITE
(II) Initializing extension DAMAGE
(II) Initializing extension MIT-SCREEN-SAVER
(II) Initializing extension DOUBLE-BUFFER
(II) Initializing extension RECORD
(II) Initializing extension DPMS
(II) Initializing extension Present
(II) Initializing extension DRI3
(II) Initializing extension X-Resource
(II) Initializing extension XVideo
(II) Initializing extension XVideo-MotionCompensation
(II) Initializing extension GLX
(II) Initializing extension GLX
(II) Indirect GLX disabled.
(II) AIGLX: Loaded and initialized iris
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) Initializing extension XFree86-VidModeExtension
(II) Initializing extension XFree86-DGA
(II) Initializing extension XFree86-DRI
(II) Initializing extension DRI2
(II) Initializing extension NV-GLX
(II) Initializing extension NV-CONTROL
(II) modeset(0): Damage tracking initialized
(II) modeset(0): Setting screen physical size to 1016 x 571
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "libinput keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) LoadModule: "libinput"
(II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
(II) Module libinput: vendor="X.Org Foundation"
compiled for 1.21.1.8, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 24.4
(II) Using input driver 'libinput' for 'Power Button'
(**) Power Button: always reports core events
(**) Option "Device" "/dev/input/event2"
(II) event2 - Power Button: is tagged by udev as: Keyboard
(II) event2 - Power Button: device is a keyboard
(II) event2 - Power Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_layout" "us"
(II) event2 - Power Button: is tagged by udev as: Keyboard
(II) event2 - Power Button: device is a keyboard
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "libinput keyboard catchall"
(**) Video Bus: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Video Bus'
(**) Video Bus: always reports core events
(**) Option "Device" "/dev/input/event3"
(II) event3 - Video Bus: is tagged by udev as: Keyboard
(II) event3 - Video Bus: device is a keyboard
(II) event3 - Video Bus: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(**) Option "xkb_layout" "us"
(II) event3 - Video Bus: is tagged by udev as: Keyboard
(II) event3 - Video Bus: device is a keyboard
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "libinput keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Power Button'
(**) Power Button: always reports core events
(**) Option "Device" "/dev/input/event1"
(II) event1 - Power Button: is tagged by udev as: Keyboard
(II) event1 - Power Button: device is a keyboard
(II) event1 - Power Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(**) Option "xkb_layout" "us"
(II) event1 - Power Button: is tagged by udev as: Keyboard
(II) event1 - Power Button: device is a keyboard
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "libinput keyboard catchall"
(**) Sleep Button: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) Option "Device" "/dev/input/event0"
(II) event0 - Sleep Button: is tagged by udev as: Keyboard
(II) event0 - Sleep Button: device is a keyboard
(II) event0 - Sleep Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
(**) Option "xkb_layout" "us"
(II) event0 - Sleep Button: is tagged by udev as: Keyboard
(II) event0 - Sleep Button: device is a keyboard
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event4)
(**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
(**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
(**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
(**) Option "Device" "/dev/input/event4"
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1050:0407.0001/input/input4/event4"
(II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 10)
(**) Option "xkb_layout" "us"
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
(**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver'
(**) Logitech USB Receiver: always reports core events
(**) Option "Device" "/dev/input/event5"
(II) event5 - Logitech USB Receiver: is tagged by udev as: Keyboard
(II) event5 - Logitech USB Receiver: device is a keyboard
(II) event5 - Logitech USB Receiver: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C548.0003/input/input5/event5"
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
(**) Option "xkb_layout" "us"
(II) event5 - Logitech USB Receiver: is tagged by udev as: Keyboard
(II) event5 - Logitech USB Receiver: device is a keyboard
(II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event6)
(**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
(**) Logitech USB Receiver Mouse: always reports core events
(**) Option "Device" "/dev/input/event6"
(II) event6 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
(II) event6 - Logitech USB Receiver Mouse: device is a pointer
(II) event6 - Logitech USB Receiver Mouse: device removed
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input6/event6"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 12)
(**) Option "AccelerationScheme" "none"
(**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
(**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
(II) event6 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
(II) event6 - Logitech USB Receiver Mouse: device is a pointer
(II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event7)
(**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
(**) Logitech USB Receiver Consumer Control: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device removed
(II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input7/event7"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 13)
(**) Option "AccelerationScheme" "none"
(**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
(**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
(II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
(II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event8)
(**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
(**) Logitech USB Receiver System Control: always reports core events
(**) Option "Device" "/dev/input/event8"
(II) event8 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
(II) event8 - Logitech USB Receiver System Control: device is a keyboard
(II) event8 - Logitech USB Receiver System Control: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input8/event8"
(II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 14)
(**) Option "xkb_layout" "us"
(II) event8 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
(II) event8 - Logitech USB Receiver System Control: device is a keyboard
(II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/event9)
(**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
(**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
(**) Logitech M720 Triathlon: always reports core events
(**) Option "Device" "/dev/input/event9"
(II) event9 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
(II) event9 - Logitech M720 Triathlon: device is a pointer
(II) event9 - Logitech M720 Triathlon: device is a keyboard
(II) event9 - Logitech M720 Triathlon: device removed
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: needs a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.2/0003:046D:C52B.0009/0003:046D:405E.000B/input/input19/event9"
(II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: MOUSE, id 15)
(**) Option "AccelerationScheme" "none"
(**) Logitech M720 Triathlon: (accel) selected scheme none/0
(**) Logitech M720 Triathlon: (accel) acceleration factor: 2.000
(**) Logitech M720 Triathlon: (accel) acceleration threshold: 4
(II) event9 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
(II) event9 - Logitech M720 Triathlon: device is a pointer
(II) event9 - Logitech M720 Triathlon: device is a keyboard
(II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/mouse1)
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event18)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event20)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event21)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event22)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event23)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Intel HID events (/dev/input/event10)
(**) Intel HID events: Applying InputClass "libinput keyboard catchall"
(**) Intel HID events: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Intel HID events'
(**) Intel HID events: always reports core events
(**) Option "Device" "/dev/input/event10"
(II) event10 - Intel HID events: is tagged by udev as: Keyboard
(II) event10 - Intel HID events: device is a keyboard
(II) event10 - Intel HID events: device removed
(**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input20/event10"
(II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 16)
(**) Option "xkb_layout" "us"
(II) event10 - Intel HID events: is tagged by udev as: Keyboard
(II) event10 - Intel HID events: device is a keyboard
(II) config/udev: Adding input device PC Speaker (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
(**) Logitech USB Receiver Consumer Control: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input7/event7"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 17)
(**) Option "xkb_layout" "us"
(**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
(**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
(**) Logitech M720 Triathlon: always reports core events
(**) Option "Device" "/dev/input/event9"
(II) libinput: Logitech M720 Triathlon: is a virtual subdevice
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.2/0003:046D:C52B.0009/0003:046D:405E.000B/input/input19/event9"
(II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: KEYBOARD, id 18)
(**) Option "xkb_layout" "us"
(II) event2 - Power Button: device removed
(II) event3 - Video Bus: device removed
(II) event1 - Power Button: device removed
(II) event0 - Sleep Button: device removed
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device removed
(II) event5 - Logitech USB Receiver: device removed
(II) event6 - Logitech USB Receiver Mouse: device removed
(II) event8 - Logitech USB Receiver System Control: device removed
(II) event10 - Intel HID events: device removed
(II) event7 - Logitech USB Receiver Consumer Control: device removed
(II) event9 - Logitech M720 Triathlon: device removed
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) NVIDIA(G0): Failed to set the display configuration
(WW) NVIDIA(G0): - Setting a mode on head 0 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 1 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 2 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 3 failed: Insufficient permissions
(WW) NVIDIA(G0): Failed to set the display configuration
(WW) NVIDIA(G0): - Setting a mode on head 0 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 1 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 2 failed: Insufficient permissions
(WW) NVIDIA(G0): - Setting a mode on head 3 failed: Insufficient permissions
(WW) NVIDIA(G0): Failed to set DPMS to off
(II) config/udev: removing device Power Button
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "libinput keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Power Button'
(**) Power Button: always reports core events
(**) Option "Device" "/dev/input/event2"
(II) event2 - Power Button: is tagged by udev as: Keyboard
(II) event2 - Power Button: device is a keyboard
(II) event2 - Power Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Video Bus
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "libinput keyboard catchall"
(**) Video Bus: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Video Bus'
(**) Video Bus: always reports core events
(**) Option "Device" "/dev/input/event3"
(II) event3 - Video Bus: is tagged by udev as: Keyboard
(II) event3 - Video Bus: device is a keyboard
(II) event3 - Video Bus: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Power Button
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "libinput keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Power Button'
(**) Power Button: always reports core events
(**) Option "Device" "/dev/input/event1"
(II) event1 - Power Button: is tagged by udev as: Keyboard
(II) event1 - Power Button: device is a keyboard
(II) event1 - Power Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Sleep Button
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "libinput keyboard catchall"
(**) Sleep Button: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) Option "Device" "/dev/input/event0"
(II) event0 - Sleep Button: is tagged by udev as: Keyboard
(II) event0 - Sleep Button: device is a keyboard
(II) event0 - Sleep Button: device removed
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Intel HID events
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Intel HID events (/dev/input/event10)
(**) Intel HID events: Applying InputClass "libinput keyboard catchall"
(**) Intel HID events: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Intel HID events'
(**) Intel HID events: always reports core events
(**) Option "Device" "/dev/input/event10"
(II) event10 - Intel HID events: is tagged by udev as: Keyboard
(II) event10 - Intel HID events: device is a keyboard
(II) event10 - Intel HID events: device removed
(**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input20/event10"
(II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 16)
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/mouse1)
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Logitech USB Receiver
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
(**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver'
(**) Logitech USB Receiver: always reports core events
(**) Option "Device" "/dev/input/event5"
(II) event5 - Logitech USB Receiver: is tagged by udev as: Keyboard
(II) event5 - Logitech USB Receiver: device is a keyboard
(II) event5 - Logitech USB Receiver: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C548.0003/input/input5/event5"
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Logitech USB Receiver Consumer Control
(II) UnloadModule: "libinput"
(II) config/udev: removing device Logitech USB Receiver Consumer Control
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event7)
(**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
(**) Logitech USB Receiver Consumer Control: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device removed
(II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input7/event7"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 13)
(**) Option "AccelerationScheme" "none"
(**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
(**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
(**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
(**) Logitech USB Receiver Consumer Control: always reports core events
(**) Option "Device" "/dev/input/event7"
(II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
(EE) libinput: Logitech USB Receiver Consumer Control: Parent device not available
(II) event7 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device is a keyboard
(II) event7 - Logitech USB Receiver Consumer Control: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input7/event7"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 17)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Logitech USB Receiver Mouse
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event6)
(**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
(II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
(**) Logitech USB Receiver Mouse: always reports core events
(**) Option "Device" "/dev/input/event6"
(II) event6 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
(II) event6 - Logitech USB Receiver Mouse: device is a pointer
(II) event6 - Logitech USB Receiver Mouse: device removed
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input6/event6"
(II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 12)
(**) Option "AccelerationScheme" "none"
(**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
(**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event23)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event21)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Yubico YubiKey OTP+FIDO+CCID
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event4)
(**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
(**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
(**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
(**) Option "Device" "/dev/input/event4"
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
(II) event4 - Yubico YubiKey OTP+FIDO+CCID: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1050:0407.0001/input/input4/event4"
(II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 10)
(**) Option "xkb_layout" "us"
(II) config/udev: removing device Logitech USB Receiver System Control
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event8)
(**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
(**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
(**) Logitech USB Receiver System Control: always reports core events
(**) Option "Device" "/dev/input/event8"
(II) event8 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
(II) event8 - Logitech USB Receiver System Control: device is a keyboard
(II) event8 - Logitech USB Receiver System Control: device removed
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C548.0004/input/input8/event8"
(II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 14)
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event22)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event18)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device PC Speaker (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Logitech M720 Triathlon
(II) UnloadModule: "libinput"
(II) config/udev: removing device Logitech M720 Triathlon
(II) UnloadModule: "libinput"
(II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/event9)
(**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
(**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
(**) Logitech M720 Triathlon: always reports core events
(**) Option "Device" "/dev/input/event9"
(II) event9 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
(II) event9 - Logitech M720 Triathlon: device is a pointer
(II) event9 - Logitech M720 Triathlon: device is a keyboard
(II) event9 - Logitech M720 Triathlon: device removed
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: needs a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.2/0003:046D:C52B.0009/0003:046D:405E.000B/input/input19/event9"
(II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: MOUSE, id 15)
(**) Option "AccelerationScheme" "none"
(**) Logitech M720 Triathlon: (accel) selected scheme none/0
(**) Logitech M720 Triathlon: (accel) acceleration factor: 2.000
(**) Logitech M720 Triathlon: (accel) acceleration threshold: 4
(**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
(**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
(**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
(II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
(**) Logitech M720 Triathlon: always reports core events
(**) Option "Device" "/dev/input/event9"
(II) libinput: Logitech M720 Triathlon: is a virtual subdevice
(EE) libinput: Logitech M720 Triathlon: Parent device not available
(II) event9 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
(II) event9 - Logitech M720 Triathlon: device is a pointer
(II) event9 - Logitech M720 Triathlon: device is a keyboard
(II) event9 - Logitech M720 Triathlon: device removed
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.2/0003:046D:C52B.0009/0003:046D:405E.000B/input/input19/event9"
(II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: KEYBOARD, id 18)
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event20)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.