dmesg - typea128g1447

Return To typea128g1447 System Information

Booting Linux on physical CPU 0x0000000000 [0x410fd421]
Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022
OF: fdt: memory scan node memory@80000000, reg size 16,
OF: fdt:  - 80000000 ,  c0000000
Machine model: Jetson AGX Orin
efi: EFI v2.70 by EDK II
efi: RTPROP=0x805405a98 SMBIOS=0xffff0000 SMBIOS 3.0=0x8039a0000 MEMATTR=0x804767018 ESRT=0x803953f18 RNG=0x827905a18 MEMRESERVE=0x804770f18 
efi: seeding entropy pool
esrt: Reserving ESRT space from 0x0000000803953f18 to 0x0000000803953f50.
Reserved memory: created CMA memory pool at 0x0000000817800000, size 256 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
  DMA32    empty
  Normal   [mem 0x0000000100000000-0x0000000835ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x00000000fffdffff]
  node   0: [mem 0x00000000fffe0000-0x00000000ffffffff]
  node   0: [mem 0x0000000100000000-0x00000007ffffffff]
  node   0: [mem 0x0000000800000000-0x00000008021bffff]
  node   0: [mem 0x00000008021c0000-0x0000000803570fff]
  node   0: [mem 0x0000000803571000-0x000000080370cfff]
  node   0: [mem 0x000000080370d000-0x000000080398ffff]
  node   0: [mem 0x0000000803990000-0x00000008039affff]
  node   0: [mem 0x00000008039b0000-0x000000080453ffff]
  node   0: [mem 0x0000000804540000-0x00000008046cffff]
  node   0: [mem 0x00000008046d0000-0x000000080473ffff]
  node   0: [mem 0x0000000804740000-0x000000080475ffff]
  node   0: [mem 0x0000000804760000-0x000000080477ffff]
  node   0: [mem 0x0000000804780000-0x000000080499ffff]
  node   0: [mem 0x00000008049a0000-0x00000008049bffff]
  node   0: [mem 0x00000008049c0000-0x0000000804a0ffff]
  node   0: [mem 0x0000000804a10000-0x0000000804a9ffff]
  node   0: [mem 0x0000000804aa0000-0x0000000804e4ffff]
  node   0: [mem 0x0000000804e50000-0x0000000804e5ffff]
  node   0: [mem 0x0000000804e60000-0x0000000804e6ffff]
  node   0: [mem 0x0000000804e70000-0x0000000804e7ffff]
  node   0: [mem 0x0000000804e80000-0x0000000804ebffff]
  node   0: [mem 0x0000000804ec0000-0x000000080534ffff]
  node   0: [mem 0x0000000805350000-0x000000080539ffff]
  node   0: [mem 0x00000008053a0000-0x00000008053cffff]
  node   0: [mem 0x00000008053d0000-0x00000008053effff]
  node   0: [mem 0x00000008053f0000-0x000000080553ffff]
  node   0: [mem 0x0000000805540000-0x00000008055dffff]
  node   0: [mem 0x00000008055e0000-0x000000080568ffff]
  node   0: [mem 0x0000000805690000-0x000000080572ffff]
  node   0: [mem 0x0000000805730000-0x00000008057bffff]
  node   0: [mem 0x00000008057c0000-0x000000080585ffff]
  node   0: [mem 0x0000000805860000-0x000000080612ffff]
  node   0: [mem 0x0000000806130000-0x000000080630ffff]
  node   0: [mem 0x0000000806310000-0x00000008278bffff]
  node   0: [mem 0x00000008278c0000-0x000000082790ffff]
  node   0: [mem 0x0000000827910000-0x000000082b6affff]
  node   0: [mem 0x000000082c400000-0x000000082c7fffff]
  node   0: [mem 0x0000000834000000-0x0000000835ffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x0000000835ffffff]
On node 0 totalpages: 8051376
  DMA zone: 8192 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 524288 pages, LIFO batch:63
  Normal zone: 118144 pages used for memmap
  Normal zone: 7527088 pages, LIFO batch:63
On node 0, zone Normal: 336 pages in unavailable ranges
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072
pcpu-alloc: s90136 r8192 d32744 u131072 alloc=32*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 
Detected PIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: kernel page table isolation forced ON by KASLR
CPU features: detected: Kernel page table isolation (KPTI)
CPU features: detected: Spectre-v4
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on.  Total pages: 7925040
Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nv-auto-config 
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB)
Memory: 30994408K/32205504K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 948952K reserved, 262144K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU event tracing is enabled.
rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 960 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000
GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70)
GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677]
arch_timer: cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
printk: console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux:  Initializing.
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
rcu: Hierarchical SRCU implementation.
dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts
DTB Build time: Aug 10 2022 20:31:40
Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0
Remapping and enabling EFI services.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000
CPU1: Booted secondary processor 0x0000000100 [0x410fd421]
Detected PIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000
CPU2: Booted secondary processor 0x0000000200 [0x410fd421]
Detected PIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000
CPU3: Booted secondary processor 0x0000000300 [0x410fd421]
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000
CPU4: Booted secondary processor 0x0000010000 [0x410fd421]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000
CPU5: Booted secondary processor 0x0000010100 [0x410fd421]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000
CPU6: Booted secondary processor 0x0000010200 [0x410fd421]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000
CPU7: Booted secondary processor 0x0000010300 [0x410fd421]
Detected PIPT I-cache on CPU8
GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000
CPU8: Booted secondary processor 0x0000020000 [0x410fd421]
Detected PIPT I-cache on CPU9
GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000
CPU9: Booted secondary processor 0x0000020100 [0x410fd421]
Detected PIPT I-cache on CPU10
GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000
CPU10: Booted secondary processor 0x0000020200 [0x410fd421]
Detected PIPT I-cache on CPU11
GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000
CPU11: Booted secondary processor 0x0000020300 [0x410fd421]
smp: Brought up 1 node, 12 CPUs
SMP: Total of 12 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: LSE atomic instructions
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
KASLR enabled
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
SMBIOS 3.0.0 present.
DMI:  /, BIOS 1.0-d7fb19b 08/10/2022
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'power_allocator'
thermal_sys: Registered thermal governor 'pid_thermal_gov'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 32768 entries
tegra234_mc_sid_probe(): tegra234 mc-sid probe successful
Tegra reboot handler registered.
mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000
mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000
mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000
mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000
mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000
mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000
mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000
mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000
mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000
mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000
mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000
mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000
mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000
mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000
mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000
mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000
mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000
nv-tegra-mc 2c10000.mc: No mssnvlink node
mc-err: mcerr ops are set to t23x
tegra234-cbb 13a00000.cbb-fabric: secure_irq = 21
tegra234-cbb c600000.aon-fabric: secure_irq = 22
tegra234-cbb d600000.bpmp-fabric: secure_irq = 23
tegra234-cbb de00000.dce-fabric: secure_irq = 24
tegra234-cbb be00000.rce-fabric: secure_irq = 25
tegra234-cbb b600000.sce-fabric: secure_irq = 26
printk: console [ttyAMA0] enabled
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
ACPI: Interpreter disabled.
vdd-av1v1-hub: supplied by vdd-5v-sys
vbusA-cvb: supplied by vdd-5v-sys
vbusB-cvb: supplied by vdd-5v-sys
vdd-usbc1-vbus: supplied by vdd-5v-sys
vdd-usbc2-vbus: supplied by vdd-5v-sys
iommu: Default domain type: Translated 
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 2190000.watchdog: Registered successfully
Registered efivars operations
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
camchar: rtcpu character device driver loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
la/ptsa driver initialized.
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8196K
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 48 bits
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=23 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
ntfs: driver 2.1.32 [Flags: R/W].
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler mq-deadline registered
io scheduler kyber registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
tegra_dc_assign_hw_data: no matching compatible node
tegradccommon module_init failed
tegradc module_init failed
EINJ: ACPI disabled.
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: ### PMC reset source: SYS_RESET_N
tegra-pmc: ### PMC reset level: L0
tegra-pmc: ### PMC reset status reg: 0x0
random: fast init done
printk: console [ttyTCU0] enabled
arm-smmu 12000000.iommu: probing hardware configuration...
arm-smmu 12000000.iommu: SMMUv2 with:
arm-smmu 12000000.iommu: 	stage 1 translation
arm-smmu 12000000.iommu: 	stage 2 translation
arm-smmu 12000000.iommu: 	nested translation
arm-smmu 12000000.iommu: 	stream matching with 128 register groups
arm-smmu 12000000.iommu: 	128 context banks (0 stage-2 only)
arm-smmu 12000000.iommu: 	Supported page sizes: 0x00001000
arm-smmu 12000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 12000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu 10000000.iommu: probing hardware configuration...
arm-smmu 10000000.iommu: SMMUv2 with:
arm-smmu 10000000.iommu: 	stage 1 translation
arm-smmu 10000000.iommu: 	stage 2 translation
arm-smmu 10000000.iommu: 	nested translation
arm-smmu 10000000.iommu: 	stream matching with 128 register groups
arm-smmu 10000000.iommu: 	128 context banks (0 stage-2 only)
arm-smmu 10000000.iommu: 	Supported page sizes: 0x00001000
arm-smmu 10000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 10000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu 8000000.iommu: probing hardware configuration...
arm-smmu 8000000.iommu: SMMUv2 with:
arm-smmu 8000000.iommu: 	stage 1 translation
arm-smmu 8000000.iommu: 	stage 2 translation
arm-smmu 8000000.iommu: 	nested translation
arm-smmu 8000000.iommu: 	stream matching with 128 register groups
arm-smmu 8000000.iommu: 	128 context banks (0 stage-2 only)
arm-smmu 8000000.iommu: 	Supported page sizes: 0x00001000
arm-smmu 8000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 8000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful
tegra_profiler: version: 1.147, samples/io: 49/28
tegra_profiler: auth: init
nvsciipc: loaded module
tegra23x-qspi 3270000.spi: Adding to iommu group 0
tegra23x-qspi 3270000.spi: Node prod has invalid entries
tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting
tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting.
tegra23x-qspi 3270000.spi: Prod settings list not found
tegra23x-qspi 3270000.spi: Failed to get reset control: -517
tun: Universal TUN/TAP device driver, 1.6
hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
hns3: Copyright (c) 2017 Huawei Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver aqc111
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3610000.xhci: Adding to iommu group 1
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
tegra-xudc 3550000.xudc: Adding to iommu group 2
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
tegra_rtc c2a0000.rtc: registered as rtc1
tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:30 UTC (30)
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
tegra-i2c 3160000.i2c: Adding to iommu group 3
tegra-i2c c240000.i2c: Adding to iommu group 3
tegra-i2c 3180000.i2c: Adding to iommu group 3
tegra-i2c 3190000.i2c: Adding to iommu group 3
tegra-i2c 31b0000.i2c: Adding to iommu group 3
tegra-i2c 31c0000.i2c: Adding to iommu group 3
tegra-i2c c250000.i2c: Adding to iommu group 3
tegra-i2c 31e0000.i2c: Adding to iommu group 3
tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint.
tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Adding to iommu group 4
sdhci-tegra 3400000.sdhci: Adding to iommu group 5
SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401
tegra-bpmp bpmp: firmware: 888a114dda6bea50b6c6-eac380526d6
nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 
nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81
nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0
nvvrs_pseq 4-003c: NVVRS PSEQ probe successful
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra-dce d800000.dce: Adding to iommu group 6
dce: dce_ipc_channel_init:314  Invalid Channel State [0x0] for ch_type [2]
tegra234-aon c000000.aon: Adding to iommu group 7
dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x5]
dce: dce_admin_ipc_handle_signal:89   Spurious signal on channel: [0]. Ignored...
 c000000.aon:hsp: probed
dce: dce_admin_send_cmd_ver:413  version : [0x2] err : [0x0]
dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x1]
tegra234-aon c000000.aon: init done
dce: dce_admin_setup_clients_ipc:542  Channel Reset Complete for Type [1] ...
dce: dce_admin_ipc_handle_signal:89   Spurious signal on channel: [1]. Ignored...
tegra23x-psc e860000.psc: Adding to iommu group 8
dce: dce_admin_setup_clients_ipc:518  Get queue info failed for [2]
dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x2]
tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____)
dce: dce_admin_setup_clients_ipc:542  Channel Reset Complete for Type [3] ...
dce: dce_admin_ipc_handle_signal:89   Spurious signal on channel: [3]. Ignored...
dce: dce_admin_ipc_handle_signal:89   Spurious signal on channel: [3]. Ignored...
tegra23x-psc e860000.psc: init done
tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9
dce: dce_start_boot_flow:100  DCE_BOOT_DONE
tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584
tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080
tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200
tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (117)
tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=7a10e4613e151d2bf1df37dd80d456800f5b94d0
t19x_cache tegra-cache: probed
scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU
optee: probing for conduit method.
optee: revision 3.16 (65cc2218)
optee: dynamic shared memory is enabled
optee: initialized driver
nvpmodel: initialized successfully
tegra_hv: get_hvd: not initialized yet
user_ivc_mempool: hypervisor not present
usbcore: registered new interface driver snd-usb-audio
u32 classifier
    input device check on
    Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9'
tegra194-pcie 14100000.pcie: Adding to iommu group 10
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: Adding to iommu group 11
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Adding to iommu group 12
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13
host1x 13e40000.host1x: Adding to iommu group 14
t23x_init_gating_regs: Timed out waiting for syncpt ram init!
host1x 13e40000.host1x: initialized
iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15
iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16
iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17
iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18
iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19
iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20
iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21
iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22
iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23
iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24
iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25
iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26
iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27
iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28
iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29
iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30
iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000)
falcon 15340000.vic: Adding to iommu group 31
falcon 15340000.vic: initialized
falcon 15380000.nvjpg: Adding to iommu group 32
falcon 15380000.nvjpg: initialized
falcon 15540000.nvjpg1: Adding to iommu group 33
falcon 15540000.nvjpg1: initialized
falcon 154c0000.nvenc: Adding to iommu group 34
falcon 154c0000.nvenc: initialized
falcon 15a50000.ofa: Adding to iommu group 35
falcon 15a50000.ofa: initialized
nvdec 15480000.nvdec: Adding to iommu group 36
nvdec 15480000.nvdec: initialized
tsec 15500000.tsec: Adding to iommu group 37
tsec 15500000.tsec: initialized
gic 2a41000.agic-controller: GIC IRQ controller registered
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
gpio-394 (camera-control-output-low): hogged as output/low
gpio-397 (camera-control-output-low): hogged as output/low
gpio-487 (camera-control-output-low): hogged as output/low
gpio-486 (camera-control-output-low): hogged as output/low
gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio
gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
tegra194-isp5 14800000.isp: Adding to iommu group 38
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39
tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized
scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000)
pva 16000000.pva0: Adding to iommu group 49
pva 16000000.pva0: initialized
nvdla 15880000.nvdla0: Adding to iommu group 50
nvdla 15880000.nvdla0: initialized
nvdla 158c0000.nvdla1: Adding to iommu group 51
nvdla 158c0000.nvdla1: initialized
tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3
tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels
tegra-fuse-burn efuse-burn: shutdown limit check disabled
tegra-fuse-burn efuse-burn: Fuse burn driver initialized
tegra23x-qspi 3270000.spi: Node prod has invalid entries
tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting
tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting.
tegra23x-qspi 3270000.spi: Prod settings list not found
tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810
tegra-xusb 3610000.xhci: irq 235, io mem 0x03610000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb1: SerialNumber: 3610000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2007000 KHz, changing to: 2035200 KHz
cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz
cpufreq: cpu4,cur:1919000,set:2035200,set ndiv:159
cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 1978000 KHz, changing to: 2035200 KHz
tegra194-cpufreq e000000.ccplex: probed with ICC
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
mmc0: CQHCI version 5.10
tegra194-pcie 14100000.pcie:       IO 0x0030100000..0x00301fffff -> 0x0030100000
tegra194-pcie 14100000.pcie:      MEM 0x20a8000000..0x20afffffff -> 0x0040000000
tegra194-pcie 14100000.pcie:      MEM 0x2080000000..0x20a7ffffff -> 0x2080000000
irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302
usb 1-3: new full-speed USB device number 2 using tegra-xusb
tegra194-pcie 14100000.pcie: Link up
tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io  0x0000-0xfffff] (bus address [0x30100000-0x301fffff])
pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref]
pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000
pci 0001:01:00.0: reg 0x10: [io  0x0000-0x00ff]
pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit]
random: crng init done
mmc0: Command Queue Engine enabled
pci 0001:01:00.0: supports D1 D2
mmc0: periodic cache flush enabled
pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
mmc0: new HS400 Enhanced strobe MMC card at address 0001
pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff]
mmcblk0: mmc0:0001 G1M15M 59.3 GiB 
pci 0001:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0)
pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit]
pci 0001:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0:   bridge window [io  0x1000-0x1fff]
pci 0001:00:00.0:   bridge window [mem 0x20a8000000-0x20a80fffff]
pci 0001:00:00.0: Max Payload Size set to  128/ 256 (was  256), Max Read Rq  512
pci 0001:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  512
pcieport 0001:00:00.0: Adding to iommu group 10
pcieport 0001:00:00.0: PME: Signaling with IRQ 51
pcieport 0001:00:00.0: AER: enabled with IRQ 51
usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
usb 1-3: Product: Bluetooth Radio
tegra194-pcie 14160000.pcie:       IO 0x0036100000..0x00361fffff -> 0x0036100000
usb 1-3: Manufacturer: Realtek
tegra194-pcie 14160000.pcie:      MEM 0x2428000000..0x242fffffff -> 0x0040000000
usb 1-3: SerialNumber: 00e04c000001
tegra194-pcie 14160000.pcie:      MEM 0x2140000000..0x2427ffffff -> 0x2140000000
 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb
usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: 4-Port USB 3.0 Hub
usb 2-3: Manufacturer: Generic
hub 2-3:1.0: USB hub found
tegra194-pcie 14160000.pcie: Link up
hub 2-3:1.0: 4 ports detected
tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x36100000-0x361fffff])
pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref]
pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot
pci 0004:01:00.0: [1d79:2267] type 00 class 0x010802
pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
usb 1-4: new high-speed USB device number 3 using tegra-xusb
pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff]
pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit]
pci 0004:00:00.0: PCI bridge to [bus 01-ff]
pci 0004:00:00.0:   bridge window [mem 0x2428000000-0x24280fffff]
pci 0004:00:00.0: Max Payload Size set to  256/ 256 (was  256), Max Read Rq  512
pci 0004:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
pcieport 0004:00:00.0: Adding to iommu group 11
pcieport 0004:00:00.0: PME: Signaling with IRQ 53
pcieport 0004:00:00.0: AER: enabled with IRQ 53
nvme 0004:01:00.0: Adding to iommu group 11
nvme nvme0: pci function 0004:01:00.0
nvme 0004:01:00.0: enabling device (0000 -> 0002)
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
vdd-3v3-pcie: supplied by vdd-3v3-sys
nvme nvme0: missing or invalid SUBNQN field.
avdd-cam-2v8: supplied by vdd-3v3-sys
vdd-dp: supplied by vdd-3v3-sys
vdd-3v3-sd: supplied by vdd-3v3-sys
dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
(NULL device *): fops function table already registered
tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
nvme nvme0: 12/0/0 default/read/poll queues
 nvme0n1: p1
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302
usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: 4-Port USB 2.0 Hub
usb 1-4: Manufacturer: Generic
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges:
tegra194-pcie 141a0000.pcie:       IO 0x003a100000..0x003a1fffff -> 0x003a100000
tegra194-pcie 141a0000.pcie:      MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000
tegra194-pcie 141a0000.pcie:      MEM 0x2740000000..0x2b27ffffff -> 0x2740000000
mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
tegra194-pcie 141a0000.pcie: Phy link never came up
tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io  0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref]
pci 0005:00:00.0: [10de:229a] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
pci 0005:00:00.0: Max Payload Size set to  256/ 256 (was  256), Max Read Rq  512
pcieport 0005:00:00.0: Adding to iommu group 12
pcieport 0005:00:00.0: PME: Signaling with IRQ 55
pcieport 0005:00:00.0: AER: enabled with IRQ 55
pci_bus 0005:01: busn_res: [bus 01-ff] is released
pci 0005:00:00.0: Removing from iommu group 12
pci_bus 0005:00: busn_res: [bus 00-ff] is released
nvethernet 6810000.ethernet: Adding to iommu group 52
nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0
nvethernet 6810000.ethernet: failed to read MDIO address
nvethernet 6810000.ethernet: setting to default DMA bit mask
nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G
nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:7f:e5:78
-->macsec_probe()
-->macsec_get_platform_res()
macsec_enable_car()
desc.bInterfaceNumber 0
rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0
rtk_btusb: patch_add
rtk_btusb: auto suspend is disabled
rtk_btusb: pid = 0x3549
rtk_btusb: patch_add: Reset gEVersion to 0xff
rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
rtk_btusb: btusb_probe: done
usbcore: registered new interface driver rtk_btusb
rtk_btusb: btusb_open start
rtk_btusb: btusb_open hdev->promisc ==0
rtk_btusb: download_patch start
rtk_btusb: chip type value: 0x73
rtk_btusb: HCI reset.
rtk_btusb: read_ver_rsp->lmp_subver = 0x8822
rtk_btusb: read_ver_rsp->hci_rev = 0xc
rtk_btusb: patch_entry->lmp_sub = 0x8822
rtk_btusb: load_firmware start
rtk_btusb: lmp_version = 0x8822
rtk_btusb: config filename rtl8822cu_config
rtk_btusb: no bdaddr file /opt/bdaddr
rtk_btusb: 55 ab 23 87 00 00
rtk_btusb: Config file length 6, new length 6
rtk_btusb: fw name is  rtl8822cu_fw
rtk_btusb: This is not 8723a, use new patch style!
rtk_btusb: rtk_get_eversion: gEVersion 255
rtk_btusb: eversion->status = 0x0, eversion->version = 0x3
rtk_btusb: load_firmware: New gEVersion 3
rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13
rtk_btusb: lmp_version is 8822, project_id is 8822, match!
rtk_btusb: fw_version = 0x9a8cbc9
rtk_btusb: number_of_total_patch = 3
rtk_btusb: chipID 4
rtk_btusb: patch_length 0x8590
rtk_btusb: start_offset 0x00005d00
rtk_btusb: Svn version: 1940234490
rtk_btusb: Coexistence: BTCOEX_20210106-2020
rtk_btusb: buf_len = 0x8596
rtk_btusb: fw: exists, config file: exists
rtk_btusb: load_firmware done
rtk_btusb: download_data start
rtl88x2ce 0001:01:00.0: Adding to iommu group 10
rtl88x2ce 0001:01:00.0: enabling device (0000 -> 0003)
rtk_btusb: download_data done
rtk_btusb: HCI reset.
rtk_btusb: read_ver_rsp->lmp_subver = 0xcbc9
rtk_btusb: read_ver_rsp->hci_rev = 0x9a8
rtk_btusb: patch_entry->lmp_sub = 0x8822
rtk_btusb: Rtk patch end 0
rtk_btusb: btusb_open set HCI_RUNNING
rtk_btcoex: Open BTCOEX
rtk_btusb: btusb_open end
rtk_btcoex: BTCOEX hci_rev 0x09a8
rtk_btcoex: BTCOEX lmp_subver 0xcbc9
rtk_btusb: btusb_notify: hci0 evt 3
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
tegra210-adsp tegra210-adsp: Loaded app wire
tegra210-adsp tegra210-adsp: Loaded app apm
tegra210-adsp tegra210-adsp: Loaded app adma
tegra210-adsp tegra210-adsp: Loaded app adma_tx
nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 0000000063f63395
rndis0: HOST MAC 12:c8:b5:06:60:e4
rndis0: MAC 12:c8:b5:06:60:e5
usb0: HOST MAC 12:c8:b5:06:60:e6
usb0: MAC 12:c8:b5:06:60:e7
tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered
pstore: Using crash dump compression: deflate
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0x200000@0x82c200000, ecc: 0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
CPU8: shutdown
psci: CPU8 killed (polled 0 ms)
CPU9: shutdown
psci: CPU9 killed (polled 0 ms)
hwmon hwmon4: temp1_input not attached to any thermal zone
CPU10: shutdown
psci: CPU10 killed (polled 0 ms)
IRQ 122: no longer affine to CPU11
CPU11: shutdown
psci: CPU11 killed (polled 0 ms)
nvgpu: 17000000.ga10b                 tpc_pg_mask_store:1067 [INFO]  no value change, same mask already set
Aquantia AQR113C 6810000.ethernet:00: No AQR phy_mode setting in DT
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram0: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram0.  Priority:5 extents:1 across:1954292k SS
zram1: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram1.  Priority:5 extents:1 across:1954292k SS
zram2: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram2.  Priority:5 extents:1 across:1954292k SS
zram3: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram3.  Priority:5 extents:1 across:1954292k SS
zram4: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram4.  Priority:5 extents:1 across:1954292k SS
zram5: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram5.  Priority:5 extents:1 across:1954292k SS
zram6: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram6.  Priority:5 extents:1 across:1954292k SS
zram7: detected capacity change from 0 to 2001199104
Adding 1954292k swap on /dev/zram7.  Priority:5 extents:1 across:1954292k SS
Bridge firewalling registered
fuse: init (API version 7.32)
nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64  35.1.0  Release Build  (buildbrain@mobile-u64-5273-d7000)  Wed Aug 10 20:32:41 PDT 2022
NVRM gpumgrGetSomeGpu: Failed to retrieve pGpu - Too early call!.
NVRM nvAssertFailedNoLog: Assertion failed: NV_FALSE @ gpu_mgr.c:296
CPU: 7 PID: 1899 Comm: modprobe Tainted: G           O      5.10.104-tegra #1
Hardware name:  /, BIOS 1.0-d7fb19b 08/10/2022
Call trace:
 dump_backtrace+0x0/0x1d0
 show_stack+0x30/0x40
 dump_stack+0xd8/0x138
 os_dump_stack+0x18/0x20 [nvidia]
 tlsEntryGet+0x130/0x138 [nvidia]
 gpumgrGetSomeGpu+0x7c/0x90 [nvidia]
 threadPriorityStateFree+0xa8/0x2a8 [nvidia]
 rmclientConstruct_IMPL+0x170/0x240 [nvidia]
 __nvoc_ctor_RmClient+0x5c/0x88 [nvidia]
 __nvoc_objCreate_RmClient+0x78/0x110 [nvidia]
 resservClientFactory+0x28/0x90 [nvidia]
 serverAllocClient+0x19c/0x318 [nvidia]
 serverAllocResource+0x140/0x2e0 [nvidia]
 rmapiAllocWithSecInfo+0x180/0x2e0 [nvidia]
 rmapiAllocWithSecInfoTls+0x74/0xa8 [nvidia]
 rmapiControlWithSecInfoTls+0x4a8/0x520 [nvidia]
 nvkms_call_rm+0x60/0x98 [nvidia_modeset]
 nvRmApiAlloc+0x30/0x40 [nvidia_modeset]
 do_one_initcall+0x50/0x2f0
 do_init_module+0x50/0x200
 load_module+0x2000/0x22f0
 __do_sys_finit_module+0xb4/0x100
 __arm64_sys_finit_module+0x2c/0x40
 el0_svc_common.constprop.0+0x80/0x1d0
 do_el0_svc+0x38/0xb0
 el0_svc+0x1c/0x30
 el0_sync_handler+0xa8/0xb0
 el0_sync+0x16c/0x180
NVRM gpumgrGetSomeGpu: Failed to retrieve pGpu - Too early call!.
NVRM nvAssertFailedNoLog: Assertion failed: NV_FALSE @ gpu_mgr.c:296
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080013f result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080017e result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080014a result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x730190 result 0x56:
dce: dce_ipc_read_message:678  Error getting next free buf to read
dce: dce_client_process_event_ipc:319  Error in reading DCE msg for ch_type [3]
vdd-12v-sys: disabling
vdd-3v3-ftdi: disabling
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
usb 2-3.4: new SuperSpeed Gen 1 USB device number 3 using tegra-xusb
usb 2-3.4: New USB device found, idVendor=152d, idProduct=0583, bcdDevice= 2.08
usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4: Product: DX2
usb 2-3.4: Manufacturer: DIGIFAST
usb 2-3.4: SerialNumber: 00000200A00AE
scsi host0: uas
scsi 0:0:0:0: Direct-Access     DIGIFAST DX2              0208 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
 sda:
sd 0:0:0:0: [sda] Attached SCSI disk
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
usb 1-4.1: new full-speed USB device number 4 using tegra-xusb
usb 1-4.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.1: Product: USB Receiver
usb 1-4.1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C534.0001/input/input5
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.1/input0
input: Logitech USB Receiver Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/input/input6
input: Logitech USB Receiver Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/input/input7
input: Logitech USB Receiver System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/input/input8
hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.1/input1
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.1/input0
logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.1/input1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input11
input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input12
input: Logitech Wireless Keyboard PID:4023 System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input13
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.1/input1:1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4022 Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input18
hid-generic 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.1/input1:2
input: Logitech Wireless Keyboard PID:4023 as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input22
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.1/input1:1
input: Logitech Wireless Mouse PID:4022 as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input23
logitech-hidpp-device 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.1/input1:2
logitech-hidpp-device 0003:046D:4022.0004: HID++ 2.0 device connected.
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nvethernet 6810000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
 sda:
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)

Return To typea128g1447 System Information