Xorg.0.log - ebizzy-ce-test1
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.4.0-141-generic x86_64
Current Operating System: Linux LOOM0001 4.9.11-1.0.0+gc27010d #3 SMP PREEMPT Mon Nov 26 11:25:35 UTC 2018 armv7l
Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk2p1 rootwait rw hw_rev=0
Build Date: 18 March 2019 10:11:22AM
Current version of pixman: 0.34.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 14 13:16:39 2019
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "i.MX Accelerated Framebuffer Device"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "10"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(==) FontPath set to:
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x1c5170
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 20.0
X.Org XInput driver : 22.1
X.Org Server Extension : 9.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(II) no primary bus or device found
falling back to /sys/devices/platform/Vivante GCCore/drm/card0
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 9.0
(==) AIGLX enabled
(II) LoadModule: "vivante"
(II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
(II) Module vivante: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 20.0
(II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
VivanteGCCORE
(--) using VT number 2
(WW) Falling back to old probe method for vivante
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 20.0
(II) VIVANTE(0): using default device
(II) VIVANTE(0): Device preferred mode 'fb0':U:800x600p-60
(II) VIVANTE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
(==) VIVANTE(0): RGB weight 888
(==) VIVANTE(0): Default visual is TrueColor
(==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
(**) VIVANTE(0): mExaHwType:1
(II) VIVANTE(0): checking modes against framebuffer device...
(II) VIVANTE(0): checking modes against monitor...
(--) VIVANTE(0): Virtual size is 0x0 (pitch 0)
(++) VIVANTE(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 2.6.0
ABI class: X.Org Video Driver, version 20.0
(II) VIVANTE(0): printing discovered frame buffer 'fb0' supported modes:
(II) VIVANTE(0): Modeline "U:800x600p-60"x0.0 39.60 800 912 922 1010 600 621 631 670 -hsync -vsync -csync (39.2 kHz eP)
(II) VIVANTE(0): Output DISP3 BG has no monitor section
(II) VIVANTE(0): Printing probed modes for output DISP3 BG
(II) VIVANTE(0): Modeline "U:800x600p-60"x58.5 39.60 800 912 922 1010 600 621 631 670 -hsync -vsync -csync (39.2 kHz eP)
(II) VIVANTE(0): Output DISP3 BG connected
(II) VIVANTE(0): Using exact sizes for initial modes
(II) VIVANTE(0): Output DISP3 BG using initial mode U:800x600p-60 +0+0
(II) VIVANTE(0): imxDisplayPreInit: virtual set 800 x 600, display width 0
(II) VIVANTE(0): VivPreInit: adjust display width 800
(--) Depth 24 pixmap format is 32 bpp
(II) VIVANTE(0): reserve 8355840 bytes for on screen frame buffer; total fb memory size 16716800 bytes; offset of shadow buffer 8355840
(II) VIVANTE(0): hardware: DISP3 BG (video memory: 16325kB)
(II) VIVANTE(0): FB Start = 0x7544c000 FB Base = 0x7544c000 FB Offset = (nil)
(II) VIVANTE(0): test Initializing EXA
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(==) VIVANTE(0): Backing store enabled
(==) VIVANTE(0): DPMS enabled
(II) VIVANTE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID platform:Vivante GCCore:00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore:00
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) VIVANTE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) VIVANTE(0): [drm] framebuffer handle = 0x44a00000
(II) VIVANTE(0): [drm] added 1 reserved context for kernel
(II) VIVANTE(0): X context handle = 0x1
(II) VIVANTE(0): [drm] installed DRM signal handler
(II) VIVANTE(0): [DRI] installation complete
(--) RandR disabled
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) VIVANTE(0): Setting screen physical size to 203 x 152
(II) config/udev: Adding input device Microchip Technology Inc. AR1100 HID-MOUSE (/dev/input/event0)
(**) Microchip Technology Inc. AR1100 HID-MOUSE: Applying InputClass "evdev pointer catchall"
(**) Microchip Technology Inc. AR1100 HID-MOUSE: Applying InputClass "calibration"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.18.4, module version = 2.10.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 22.1
(II) Using input driver 'evdev' for 'Microchip Technology Inc. AR1100 HID-MOUSE'
(**) Microchip Technology Inc. AR1100 HID-MOUSE: always reports core events
(**) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Device: "/dev/input/event0"
(--) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Vendor 0x4d8 Product 0xc02
(--) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Found 3 mouse buttons
(--) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Found absolute axes
(--) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Found x and y absolute axes
(--) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Found absolute touchscreen
(**) Option "SwapAxes" "0"
(II) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: Configuring as touchscreen
(**) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: YAxisMapping: buttons 4 and 5
(**) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.2/2-1.2:1.0/0003:04D8:0C02.0001/input/input0/event0"
(II) XINPUT: Adding extended input device "Microchip Technology Inc. AR1100 HID-MOUSE" (type: TOUCHSCREEN, id 6)
(II) evdev: Microchip Technology Inc. AR1100 HID-MOUSE: initialized for absolute axes.
(**) Microchip Technology Inc. AR1100 HID-MOUSE: (accel) keeping acceleration scheme 1
(**) Microchip Technology Inc. AR1100 HID-MOUSE: (accel) acceleration profile 0
(**) Microchip Technology Inc. AR1100 HID-MOUSE: (accel) acceleration factor: 2.000
(**) Microchip Technology Inc. AR1100 HID-MOUSE: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Microchip Technology Inc. AR1100 HID-MOUSE (/dev/input/mouse0)
(**) Microchip Technology Inc. AR1100 HID-MOUSE: Applying InputClass "calibration"
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.