dmesg - unigine-valley2
random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
Linux version 4.13.0-36-generic (buildd@lgw01-amd64-033) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 (Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000be82efff] usable
BIOS-e820: [mem 0x00000000be82f000-0x00000000bf12efff] reserved
BIOS-e820: [mem 0x00000000bf12f000-0x00000000bfbbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data
BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
BIOS-e820: [mem 0x00000000bfc00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0300000-0x00000000f03fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.8 present.
DMI: AMD Myrtle/Myrtle, BIOS WMY7111N_Weekly_17_01_1 01/11/2017
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: No reference (HPET/PMTIMER) available
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000FF000000 mask FFFFFF000000 write-protect
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8e2840099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x1d1b2a000, 0x1d1b2afff] PGTABLE
BRK [0x1d1b2b000, 0x1d1b2bfff] PGTABLE
BRK [0x1d1b2c000, 0x1d1b2cfff] PGTABLE
BRK [0x1d1b2d000, 0x1d1b2dfff] PGTABLE
BRK [0x1d1b2e000, 0x1d1b2efff] PGTABLE
BRK [0x1d1b2f000, 0x1d1b2ffff] PGTABLE
BRK [0x1d1b30000, 0x1d1b30fff] PGTABLE
BRK [0x1d1b31000, 0x1d1b31fff] PGTABLE
RAMDISK: [mem 0x31fb4000-0x34fd1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 AMD )
ACPI: XSDT 0x00000000BFBD7188 0000BC (v01 AMD Myrtle 00000001 01000013)
ACPI: FACP 0x00000000BFBF9000 00010C (v05 AMD Myrtle 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000BFBED000 00657B (v01 AMD Myrtle 00040000 ACPI 00040000)
ACPI: FACS 0x00000000BFBB1000 000040
ACPI: UEFI 0x00000000BFBFD000 000236 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000BFBFC000 000042 (v01 AMD Myrtle 00000000 ACPI 00040000)
ACPI: ASF! 0x00000000BFBFB000 0000A5 (v32 AMD Myrtle 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000BFBFA000 000028 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: HPET 0x00000000BFBF8000 000038 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: APIC 0x00000000BFBF7000 000090 (v03 AMD Myrtle 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000BFBF6000 00003C (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBF4000 0000F6 (v01 AMD Myrtle 00001000 ACPI 00040000)
ACPI: SSDT 0x00000000BFBEB000 000B9C (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBE2000 008877 (v02 AMD Myrtle 00000002 ACPI 00040000)
ACPI: IVRS 0x00000000BFBE1000 0000D0 (v02 AMD Myrtle 00000001 ACPI 00040000)
ACPI: CRAT 0x00000000BFBE0000 000500 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDF000 00046D (v01 AMD Myrtle 00001000 ACPI 00040000)
ACPI: TPM2 0x00000000BFBDE000 000034 (v03 AMD Myrtle 00000002 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDD000 000692 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBDB000 0015C5 (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BFBD9000 00165E (v01 AMD Myrtle 00000001 ACPI 00040000)
ACPI: FPDT 0x00000000BFBD8000 000044 (v01 AMD Myrtle 00000002 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23efd5000-0x23effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000be82efff]
node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff]
node 0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2086862
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12129 pages used for memmap
DMA32 zone: 776240 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbe82f000-0xbf12efff]
PM: Registered nosave memory: [mem 0xbf12f000-0xbfbbefff]
PM: Registered nosave memory: [mem 0xbfbbf000-0xbfbfefff]
PM: Registered nosave memory: [mem 0xbfc00000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xf02fffff]
PM: Registered nosave memory: [mem 0xf0300000-0xf03fffff]
PM: Registered nosave memory: [mem 0xf0400000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xf02fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff8e2a7ec00000 s146520 r8192 d29608 u524288
pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2054232
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8074252K/8347448K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 273196K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 37831 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3099.940 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.88 BogoMIPS (lpj=12399760)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
FEATURE SPEC_CTRL Not Present
FEATURE IBPB Not Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 mitigation: Mitigation: Full AMD retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A12-9800E RADEON R7, 12 COMPUTE CORES 4C+8G (family: 0x15, model: 0x65, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24799.52 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbf12f000-0xbfbbefff] (11075584 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 3:42:36, date: 02/27/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x80
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [P0U2] (off)
ACPI: Power Resource [P3U2] (off)
ACPI: Power Resource [P0U3] (off)
ACPI: Power Resource [P3U3] (off)
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SD] (off)
ACPI: Power Resource [P3SD] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0a00000-0xf0a1ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0400000-0xf04fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0a2b000-0xf0a2bfff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0a26000-0xf0a27fff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xf0a20000-0xf0a23fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0a24000-0xf0a25fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7904] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4018-0x401f]
pci 0000:00:11.0: reg 0x14: [io 0x4024-0x4027]
pci 0000:00:11.0: reg 0x18: [io 0x4010-0x4017]
pci 0000:00:11.0: reg 0x1c: [io 0x4020-0x4023]
pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0a29000-0xf0a293ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf0a28000-0xf0a280ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [1022:43ba] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xf0920000-0xf0927fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b6] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xf0900000-0xf091ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b1] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 01-07]
pci 0000:00:02.4: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:02.4: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:01:00.2: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:03:00.0: [14e4:1687] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf0210000-0xf021ffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0220000-0xf022ffff 64bit pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1640] type 00 class 0x080501
pci 0000:03:00.1: reg 0x10: [mem 0xf0230000-0xf023ffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xf0240000-0xf024ffff 64bit pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [14e4:1677] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf0800000-0xf080ffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:08:00.0: reg 0x10: [mem 0xf0700000-0xf073ffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 08-0b]
pci 0000:00:03.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:03.1: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:00:03.1: bridge window [mem 0xc0000000-0xf01fffff 64bit pref]
pci 0000:09:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:09:08.0: PME# supported from D0 D3hot D3cold
pci 0000:09:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:09:10.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0b]
pci 0000:08:00.0: bridge window [io 0x2000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xf0500000-0xf06fffff]
pci 0000:08:00.0: bridge window [mem 0xc0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: [1002:7300] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:0a:00.0: reg 0x24: [mem 0xf0600000-0xf063ffff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xf0640000-0xf0643fff 64bit]
pci 0000:0a:00.1: supports D1 D2
pci 0000:09:08.0: PCI bridge to [bus 0a]
pci 0000:09:08.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:08.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:09:08.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: [1002:7300] type 00 class 0x038000
pci 0000:0b:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0b:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:0b:00.0: reg 0x20: [io 0x2000-0x20ff]
pci 0000:0b:00.0: reg 0x24: [mem 0xf0500000-0xf053ffff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:10.0: PCI bridge to [bus 0b]
pci 0000:09:10.0: bridge window [io 0x2000-0x2fff]
pci 0000:09:10.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:09:10.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe82f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf0300000-0xf03fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x04cf] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cdb] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:0a:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:0b:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:01:00.2: bridge window [io 0x1000-0x0fff] to [bus 02-07] add_size 1000
pci 0000:00:02.4: bridge window [io 0x1000-0x0fff] to [bus 01-07] add_size 1000
pci 0000:00:02.4: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.1: BAR 6: assigned [mem 0xf0980000-0xf09fffff pref]
pci 0000:01:00.2: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf0810000-0xf081ffff pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:02:02.0: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:04.0: PCI bridge to [bus 07]
pci 0000:01:00.2: PCI bridge to [bus 02-07]
pci 0000:01:00.2: bridge window [io 0x1000-0x1fff]
pci 0000:01:00.2: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:01:00.2: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 01-07]
pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.4: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:02.4: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xf0660000-0xf067ffff pref]
pci 0000:09:08.0: PCI bridge to [bus 0a]
pci 0000:09:08.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:08.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:09:08.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
pci 0000:09:10.0: PCI bridge to [bus 0b]
pci 0000:09:10.0: bridge window [io 0x2000-0x2fff]
pci 0000:09:10.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:09:10.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:08:00.0: PCI bridge to [bus 09-0b]
pci 0000:08:00.0: bridge window [io 0x2000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xf0500000-0xf06fffff]
pci 0000:08:00.0: bridge window [mem 0xc0000000-0xf01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 08-0b]
pci 0000:00:03.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:03.1: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:00:03.1: bridge window [mem 0xc0000000-0xf01fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf08fffff]
pci_bus 0000:08: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf07fffff]
pci_bus 0000:08: resource 2 [mem 0xc0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xf0500000-0xf06fffff]
pci_bus 0000:09: resource 2 [mem 0xc0000000-0xf01fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xf0600000-0xf06fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 49272K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:02.0 to group 0
iommu: Adding device 0000:00:02.4 to group 0
iommu: Adding device 0000:00:03.0 to group 1
iommu: Adding device 0000:00:03.1 to group 1
iommu: Adding device 0000:00:08.0 to group 2
iommu: Adding device 0000:00:09.0 to group 3
iommu: Adding device 0000:00:09.2 to group 3
iommu: Adding device 0000:00:10.0 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:14.0 to group 6
iommu: Adding device 0000:00:14.3 to group 6
iommu: Adding device 0000:00:14.7 to group 6
iommu: Adding device 0000:00:18.0 to group 7
iommu: Adding device 0000:00:18.1 to group 7
iommu: Adding device 0000:00:18.2 to group 7
iommu: Adding device 0000:00:18.3 to group 7
iommu: Adding device 0000:00:18.4 to group 7
iommu: Adding device 0000:00:18.5 to group 7
iommu: Adding device 0000:01:00.0 to group 0
iommu: Adding device 0000:01:00.1 to group 0
iommu: Adding device 0000:01:00.2 to group 0
iommu: Adding device 0000:02:00.0 to group 0
iommu: Adding device 0000:02:01.0 to group 0
iommu: Adding device 0000:02:02.0 to group 0
iommu: Adding device 0000:02:03.0 to group 0
iommu: Adding device 0000:02:04.0 to group 0
iommu: Adding device 0000:03:00.0 to group 0
iommu: Adding device 0000:03:00.1 to group 0
iommu: Adding device 0000:05:00.0 to group 0
iommu: Adding device 0000:08:00.0 to group 1
iommu: Adding device 0000:09:08.0 to group 1
iommu: Adding device 0000:09:10.0 to group 1
iommu: Adding device 0000:0a:00.0 to group 1
iommu: Adding device 0000:0a:00.1 to group 1
iommu: Adding device 0000:0b:00.0 to group 1
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x37ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1519702955.791:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.4: Signaling PME with IRQ 218
pcieport 0000:00:03.1: Signaling PME with IRQ 220
pciehp 0000:02:02.0:pcie204: Slot #1 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffafb641800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb3: SerialNumber: 0000:01:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-36-generic xhci-hcd
usb usb4: SerialNumber: 0000:01:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06006118
microcode: CPU1: patch_level=0x06006118
microcode: CPU2: patch_level=0x06006118
microcode: CPU3: patch_level=0x06006118
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (907059061, 0)->(1074633924, -167574863)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6392960b5d1a7feefef54e83c93c27dba99187fc'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:5:716
rtc_cmos 00:01: setting system clock to 2018-02-27 03:42:36 UTC (1519702956)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2364K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 88K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:1f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1e/LNXVIDEO:01/input/input2
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PTP clock support registered
scsi host0: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0a29000 port 0xf0a29100 irq 19
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
ata2: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900100 irq 245
ata3: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900180 irq 245
ata4: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900200 irq 245
ata5: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900280 irq 245
ata6: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900300 irq 245
ata7: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900380 irq 245
ata8: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900400 irq 245
ata9: SATA max UDMA/133 abar m131072@0xf0900000 port 0xf0900480 irq 245
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
tg3.c:v3.137 (May 11, 2014)
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
amdkcl: loading out-of-tree module taints kernel.
amdkcl: module verification failed: signature and/or required key missing - tainting kernel
tg3 0000:03:00.0 eth0: Tigon3 [partno(none) rev 5762100] (PCI Express) MAC address 00:10:18:00:00:00
tg3 0000:03:00.0 eth0: attached PHY is 5762C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:1640] (rev 10)
mmc1: SDHCI controller on PCI [0000:03:00.1] using ADMA 64-bit
tg3 0000:05:00.0 eth1: Tigon3 [partno(BCM95751A519) rev 4101] (PCI Express) MAC address 00:10:18:1a:e2:23
tg3 0000:05:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:05:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:03:00.0 eno1: renamed from eth0
Warning: fail to get symbol drm_fb_helper_release_fbi, replace it with kcl stub
[drm] amdgpu kernel modesetting enabled.
tg3 0000:05:00.0 ens1: renamed from eth1
AMD IOMMUv2 driver by Joerg Roedel
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
kfd kfd: Initialized module
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1002:0x0B36 0xC9).
[drm] register mmio base: 0xF0600000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
kfd kfd: skipped device 1002:7300, PCI rejects atomics
[drm] probing gen 2 caps for device 10b5:8747 = 8796103/10e
[drm] probing mlw for device 10b5:8747 = 8796103
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
amdgpu 0000:0a:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-C88801MS-102
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:0a:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:0a:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 4096bits HBM
[TTM] Zone kernel: Available graphics memory: 4096994 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[drm] Chained IB support enabled!
[drm] Found UVD firmware Version: 1.91 Family ID: 12
[drm] UVD ENC is disabled
[drm] Found VCE firmware Version: 53.21 Binary ID: 3
usb 1-1: new low-speed USB device number 2 using xhci_hcd
[drm] Display Core initialized with v3.1.32!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD initialized successfully.
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=046d, idProduct=c06a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: Logitech
[drm] VCE initialized successfully.
[drm] fb mappable at 0xE06D0000
[drm] vram apper at 0xE0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 480x135
amdgpu 0000:0a:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.25.0 20150101 for 0000:0a:00.0 on minor 0
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1002:0x1B36 0xC9).
[drm] register mmio base: 0xF0500000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
kfd kfd: skipped device 1002:7300, PCI rejects atomics
[drm] probing gen 2 caps for device 10b5:8747 = 10796103/10e
[drm] probing mlw for device 10b5:8747 = 10796103
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
usb 1-3: new low-speed USB device number 3 using xhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
ATOM BIOS: 113-C88801SL-102
[drm] GPU posting now...
tsc: Refined TSC clocksource calibration: 3100.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf47d9d39, max_idle_ns: 440795292816 ns
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-3: New USB device found, idVendor=03f0, idProduct=0024
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: HP Basic USB Keyboard
usb 1-3: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/0003:046D:C06A.0001/input/input3
hid-generic 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-3/1-3:1.0/0003:03F0:0024.0002/input/input4
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:0b:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:0b:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 4096bits HBM
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[drm] Chained IB support enabled!
[drm] Found UVD firmware Version: 1.91 Family ID: 12
[drm] UVD ENC is disabled
[drm] Found VCE firmware Version: 53.21 Binary ID: 3
sda: sda1 sda2 < sda5 >
hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.0-3/input0
sd 0:0:0:0: [sda] Attached SCSI disk
[drm:dc_create [amdgpu]] *ERROR* DC: Number of connectors is zero!
[drm] Display Core initialized with v3.1.32!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD initialized successfully.
[drm] VCE initialized successfully.
[drm] Initialized amdgpu 3.25.0 20150101 for 0000:0b:00.0 on minor 1
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[306]: Received request to flush runtime journal from PID 1
tpm_crb MSFT0101:00: can't request region for resource [mem 0xbfbba000-0xbfbbdfff]
tpm_crb: probe of MSFT0101:00 failed with error -16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:08.0/0000:0a:00.1/sound/card1/input10
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:09.2/sound/card0/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:09.2/sound/card0/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:09.2/sound/card0/input13
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:09.2/sound/card0/input14
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:09.2/sound/card0/input15
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:09.2/sound/card0/input16
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card0/input17
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1519702975.512:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=726 comm="apparmor_parser"
audit: type=1400 audit(1519702975.512:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
audit: type=1400 audit(1519702975.513:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=726 comm="apparmor_parser"
audit: type=1400 audit(1519702975.513:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
audit: type=1400 audit(1519702975.583:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=727 comm="apparmor_parser"
audit: type=1400 audit(1519702975.584:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=727 comm="apparmor_parser"
Adding 8345596k swap on /dev/sda5. Priority:-1 extents:1 across:8345596k FS
audit: type=1400 audit(1519702975.696:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=741 comm="apparmor_parser"
audit: type=1400 audit(1519702975.696:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=741 comm="apparmor_parser"
audit: type=1400 audit(1519702975.729:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=744 comm="apparmor_parser"
audit: type=1400 audit(1519702975.775:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=749 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): ens1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
tg3 0000:05:00.0 ens1: Link is up at 1000 Mbps, full duplex
tg3 0000:05:00.0 ens1: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): ens1: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=0781, idProduct=5581
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Ultra
usb 4-1: Manufacturer: SanDisk
usb 4-1: SerialNumber: 4C530001070523117141
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 9:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 9:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb4-port1: cannot disable (err = -32)
usb 4-1: USB disconnect, device number 2
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb4-port1: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb4-port1: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb4-port1: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb4-port1: cannot disable (err = -32)