dmesg - G2030-ML
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000d979efff] usable
BIOS-e820: [mem 0x00000000d979f000-0x00000000d9c27fff] reserved
BIOS-e820: [mem 0x00000000d9c28000-0x00000000d9c28fff] ACPI data
BIOS-e820: [mem 0x00000000d9c29000-0x00000000d9d4afff] ACPI NVS
BIOS-e820: [mem 0x00000000d9d4b000-0x00000000da4d5fff] reserved
BIOS-e820: [mem 0x00000000da4d6000-0x00000000da56bfff] type 20
BIOS-e820: [mem 0x00000000da56c000-0x00000000da56cfff] usable
BIOS-e820: [mem 0x00000000da56d000-0x00000000da5affff] ACPI NVS
BIOS-e820: [mem 0x00000000da5b0000-0x00000000dad86fff] usable
BIOS-e820: [mem 0x00000000dad87000-0x00000000dafdbfff] reserved
BIOS-e820: [mem 0x00000000dafdc000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xd9d2c000 ACPI 2.0=0xd9d2c000 SMBIOS=0xf04c0 MPS=0xfd420
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./B75M-D3H, BIOS F15 10/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB800000 mask FFF800000 uncachable
5 base 11F000000 mask FFF000000 uncachable
6 base 11E800000 mask FFF800000 uncachable
7 base 11E600000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3512MB, range: 8MB, type UC
reg 5, base: 4592MB, range: 16MB, type UC
reg 6, base: 4584MB, range: 8MB, type UC
reg 7, base: 4582MB, range: 2MB, type UC
total RAM covered: 3998M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3512MB, range: 8MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 512MB, type WB
reg 6, base: 4582MB, range: 2MB, type UC
reg 7, base: 4584MB, range: 8MB, type UC
reg 8, base: 4592MB, range: 16MB, type UC
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x021fe000, 0x021fefff] PGTABLE
BRK [0x021ff000, 0x021fffff] PGTABLE
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
RAMDISK: [mem 0x33410000-0x359fffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000D9D2C000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D9D2C070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D9D35F80 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D9D2C170 009E0C (v02 ALASKA A M I 00000012 INTL 20051117)
ACPI: FACS 0x00000000D9D49F80 000040
ACPI: APIC 0x00000000D9D36078 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D9D360E0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D9D36120 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D9D36158 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D9D365F0 000968 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D9D36F58 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 0x00000000D9D379F0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
NODE_DATA(0) allocated [mem 0x11e5f5000-0x11e5f9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000d979efff]
node 0: [mem 0x00000000da56c000-0x00000000da56cfff]
node 0: [mem 0x00000000da5b0000-0x00000000dad86fff]
node 0: [mem 0x00000000dafdc000-0x00000000daffffff]
node 0: [mem 0x0000000100000000-0x000000011e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
On node 0 totalpages: 1016632
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13879 pages used for memmap
DMA32 zone: 888218 pages, LIFO batch:31
Normal zone: 1944 pages used for memmap
Normal zone: 124416 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xd979f000-0xd9c27fff]
PM: Registered nosave memory: [mem 0xd9c28000-0xd9c28fff]
PM: Registered nosave memory: [mem 0xd9c29000-0xd9d4afff]
PM: Registered nosave memory: [mem 0xd9d4b000-0xda4d5fff]
PM: Registered nosave memory: [mem 0xda4d6000-0xda56bfff]
PM: Registered nosave memory: [mem 0xda56d000-0xda5affff]
PM: Registered nosave memory: [mem 0xdad87000-0xdafdbfff]
PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88011e200000 s98008 r8192 d28968 u1048576
pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000719
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3674800K/4066528K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 391728K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.988 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.97 BogoMIPS (lpj=11971952)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
ftrace: allocating 31878 entries in 125 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Pentium(R) CPU G2030 @ 3.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11971.95 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xd9c29000-0xd9d4afff] (1187840 bytes)
PM: Registering ACPI NVS region [mem 0xda56d000-0xda5affff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 14:36:06, date: 02/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880118D0F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880118DE6C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880118E0FA00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c18000-0xf7c1800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c16000-0xf7c163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xd979f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda56d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdad87000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x20000000-0x201fffff] has been reserved
system 00:09: [mem 0x40004000-0x40004fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:03: resource 11 [mem 0xdfa00000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 38848K (ffff880033410000 - ffff880035a00000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc8fcf000-0xccfcf000] (64MB) mapped at [ffff8800c8fcf000-ffff8800ccfcefff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487169366.660:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c17000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c16000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:168:637
rtc_cmos 00:02: setting system clock to 2017-02-15 14:36:07 UTC (1487169367)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new low-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-3: New USB device found, idVendor=04ca, idProduct=0061
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Optical Mouse
usb 3-3: Manufacturer: PixArt
usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 3-4: new low-speed USB device number 3 using xhci_hcd
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
tsc: Refined TSC clocksource calibration: 2993.200 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b252da6e11, max_idle_ns: 440795218047 ns
ata1.00: ATA-9: ADATA SP600, 2.9, max UDMA/100
ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-9: WDC WD10EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ADATA SP600 2.9 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
scsi 0:0:1:0: Direct-Access ATA WDC WD10EZRX-00D 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:1:0: [sdb] 4096-byte physical blocks
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-4: New USB device found, idVendor=413c, idProduct=2107
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: Dell USB Entry Keyboard
usb 3-4: Manufacturer: Dell
usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
ata2.00: failed to resume link (SControl 30)
clocksource: Switched to clocksource tsc
ata2.01: failed to resume link (SControl 30)
ata2.00: SATA link down (SStatus 4 SControl 30)
ata2.01: SATA link down (SStatus 4 SControl 30)
Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
random: systemd-udevd urandom read with 12 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000074c000, fc:aa:14:2d:b5:74, XID 0c900800 IRQ 25
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
r8169 0000:02:00.0 enp2s0: renamed from eth0
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:04CA:0061.0001/input/input5
hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3/input0
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:413C:2107.0002/input/input6
hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-4/input0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:4d: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
raid6: sse2x1 gen() 8206 MB/s
raid6: sse2x1 xor() 6507 MB/s
raid6: sse2x2 gen() 10293 MB/s
raid6: sse2x2 xor() 7284 MB/s
raid6: sse2x4 gen() 11979 MB/s
raid6: sse2x4 xor() 8942 MB/s
raid6: using algorithm sse2x4 gen() 11979 MB/s
raid6: .... xor() 8942 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 16554.000 MB/sec
generic_sse: 15198.000 MB/sec
xor: using function: prefetch64-sse (16554.000 MB/sec)
Btrfs loaded
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Mounting Debug File System...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[306]: Received request to flush runtime journal from PID 1
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED_) (20150930/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Adding 4064252k swap on /dev/sda3. Priority:-1 extents:1 across:4064252k SSFS
random: nonblocking pool is initialized
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0781, idProduct=5567
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Cruzer Blade
usb 2-1.5: Manufacturer: SanDisk
usb 2-1.5: SerialNumber: 4C530001300810101545
usb-storage 2-1.5:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.