dmesg - openssl
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 0x24: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf7ff7000-0xf7ff7fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf7ffe400-0xf7ffe4ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf7ffc000-0xf7ffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf7ffe800-0xf7ffe8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xf7ffd000-0xf7ffdfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xf7fff000-0xf7ffffff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xf7ffec00-0xf7ffecff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:04:00.0: [1002:6798] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 0x18: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot
pci 0000:04:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfe99c000-0xfe99ffff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:03:00.0: reg 0x18: [mem 0xcffff000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe8fa000-0xfe8fbfff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:01:06.0: [1102:0005] type 00 class 0x040100
pci 0000:01:06.0: reg 0x10: [io 0xcc00-0xcc1f]
pci 0000:01:06.0: reg 0x14: [mem 0xfe600000-0xfe7fffff 64bit]
pci 0000:01:06.0: reg 0x1c: [mem 0xf8000000-0xfbffffff 64bit]
pci 0000:01:06.0: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe7fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:04:00.0
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7e80000-0xc7ffffff]
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xf6000000-0xf6003fff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b1f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xc7f00000-0xc7ffffff] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:07: [io 0x0230-0x023f] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x0f40-0x0f4f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xc7efffff] could not be reserved
system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfe7fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xc7f00000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 33868K (ffff880033dca000 - ffff880035edd000)
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:06.0 to group 2
iommu: Adding device 0000:00:07.0 to group 3
iommu: Adding device 0000:00:11.0 to group 4
iommu: Adding device 0000:00:12.0 to group 5
iommu: Adding device 0000:00:12.2 to group 5
iommu: Adding device 0000:00:13.0 to group 6
iommu: Adding device 0000:00:13.2 to group 6
iommu: Adding device 0000:00:14.0 to group 7
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 9
iommu: Adding device 0000:00:14.4 to group 10
iommu: Adding device 0000:00:14.5 to group 11
iommu: Adding device 0000:00:16.0 to group 12
iommu: Adding device 0000:00:16.2 to group 12
iommu: Adding device 0000:04:00.0 to group 13
iommu: Adding device 0000:04:00.1 to group 13
iommu: Adding device 0000:03:00.0 to group 14
iommu: Adding device 0000:02:00.0 to group 15
iommu: Adding device 0000:01:06.0 to group 10
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1477838338.885:1): initialized
workingset: timestamp_bits=46 max_order=22 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, no debug enabled
ocfs2: Registered cluster interface o2cb
OCFS2 User DLM kernel interface loaded
gfs2: GFS2 installed
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie001: service driver pcie_pme loaded
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x06000623
microcode: CPU1: patch_level=0x06000623
microcode: CPU2: patch_level=0x06000623
microcode: CPU3: patch_level=0x06000623
microcode: CPU4: patch_level=0x06000623
microcode: CPU5: patch_level=0x06000623
microcode: CPU6: patch_level=0x06000623
microcode: CPU7: patch_level=0x06000623
microcode: Microcode Update Driver: v2.01 , Peter Oruba
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Freeing unused kernel memory: 908K (ffffffff81a74000 - ffffffff81b57000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1612K (ffff88000166d000 - ffff880001800000)
Freeing unused kernel memory: 232K (ffff8800019c6000 - ffff880001a00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ahci 0000:00:11.0: version 3.0
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
scsi host0: ahci
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-rc2+ xhci-hcd
scsi host1: ahci
usb usb1: SerialNumber: 0000:02:00.0
scsi host2: ahci
hub 1-0:1.0: USB hub found
scsi host3: ahci
hub 1-0:1.0: 2 ports detected
scsi host4: ahci
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe380 irq 19
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf7ffe400
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.0-rc2+ xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.0-rc2+ ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf7ffe800
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.0-rc2+ ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf7ffec00
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.0-rc2+ ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xf7ff7000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.9.0-rc2+ ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xf7ffc000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.9.0-rc2+ ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xf7ffd000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.9.0-rc2+ ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xf7fff000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.9.0-rc2+ ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: M4-CT256M4SSD2, 000F, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 000F PQ: 0 ANSI: 5
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata5.00: configured for UDMA/133
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
scsi 1:0:0:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
scsi 4:0:0:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 4013.443 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39d9f796313, max_idle_ns: 440795212800 ns
usb 6-1: new full-speed USB device number 2 using ohci-pci
usb 3-2: new high-speed USB device number 3 using ehci-pci
usb 3-2: New USB device found, idVendor=05e3, idProduct=0610
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: USB2.0 Hub
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 6-1: New USB device found, idVendor=0738, idProduct=1708
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Mad Catz R.A.T.7 Mouse
usb 6-1: Manufacturer: Mad Catz
input: Mad Catz Mad Catz R.A.T.7 Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:0738:1708.0001/input/input1
hid-generic 0003:0738:1708.0001: input,hidraw0: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.7 Mouse] on usb-0000:00:12.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi: Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2-1[41066]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.811.02.00-rc1
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0.
Copyright(c) 2004-2016 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usb-storage
uhci_hcd: USB Universal Host Controller Interface driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 4152 MB/s
raid6: sse2x1 xor() 4068 MB/s
raid6: sse2x2 gen() 8273 MB/s
raid6: sse2x2 xor() 6322 MB/s
raid6: sse2x4 gen() 11664 MB/s
raid6: sse2x4 xor() 6568 MB/s
raid6: using algorithm sse2x4 gen() 11664 MB/s
raid6: .... xor() 6568 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
async_tx: api initialized (async)
xor: automatically using best checksumming function avx
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: linear personality registered for level -1
md: multipath personality registered for level -4
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.26)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Loading iSCSI transport class v2.0-870.
device-mapper: multipath round-robin: version 1.1.0 loaded
clocksource: Switched to clocksource tsc
random: fast init done
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
EXT4-fs (dm-1): re-mounted. Opts: discard
systemd-journald[1930]: Received request to flush runtime journal from PID 1
random: crng init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard
XFS (sdb2): Mounting V4 Filesystem
XFS (sdc2): Mounting V5 Filesystem
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
[drm] Initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc9000010d000, 00:e0:12:34:56:78, XID 0c100000 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160831/utaddress-247)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
XFS (sdb2): Ending clean mount
ACPI Warning: SystemIO range 0x0000000000000B20-0x0000000000000B27 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160831/utaddress-247)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
XFS (sdc2): Ending clean mount
snd_ctxfi 0000:01:06.0: chip 20K1 model Unknown (1102:0021) is found
input: PC Speaker as /devices/platform/pcspkr/input/input4
snd_hda_intel 0000:04:00.1: Force to non-snoop mode
snd_hda_codec_generic hdaudioC2D0: ignore pin 0x7, too many assigned pins
snd_hda_codec_generic hdaudioC2D0: ignore pin 0x9, too many assigned pins
snd_hda_codec_generic hdaudioC2D0: ignore pin 0xb, too many assigned pins
snd_hda_codec_generic hdaudioC2D0: ignore pin 0xd, too many assigned pins
snd_hda_codec_generic hdaudioC2D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC2D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC2D0: dig-out=0x3/0x5
snd_hda_codec_generic hdaudioC2D0: inputs:
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card2/input5
[drm] amdgpu kernel modesetting enabled.
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card2/input6
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x174B:0x3001 0x00).
[drm] register mmio base: 0xFE9C0000
[drm] register mmio size: 262144
ATOM BIOS: Tahiti
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[TTM] Zone kernel: Available graphics memory: 8206108 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
amdgpu 0000:04:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
amdgpu 0000:04:00.0: GTT: 8013M 0x00000000C0000000 - 0x00000002B4DC6FFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits GDDR5
[drm] amdgpu: 3072M of VRAM memory ready
[drm] amdgpu: 8013M of GTT memory ready.
[drm] GART: num cpu pages 2051527, num gpu pages 2051527
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
amdgpu 0000:04:00.0: PCIE GART of 8013M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:04:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD6
[drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
amdgpu 0000:04:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000010, cpu addr 0xffff880420501010
amdgpu 0000:04:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000020, cpu addr 0xffff880420501020
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
amdgpu 0000:04:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000030, cpu addr 0xffff880420501030
amdgpu 0000:04:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000040, cpu addr 0xffff880420501040
amdgpu 0000:04:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000050, cpu addr 0xffff880420501050
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] PCIE gen 2 link speeds already enabled
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
r8169 0000:03:00.0 enp3s0: renamed from eth0
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
snd_ctxfi 0000:01:06.0: Something wrong!!!
snd_ctxfi: probe of 0000:01:06.0 failed with error -1
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] fb mappable at 0xD0FEA000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:04:00.0 on minor 0
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready