dmesg - now
CPU0 microcode updated early to revision 0x20, date = 2016-03-16
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-5-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5+steamos1+bsos1) ) #1 SMP SteamOS 3.10.60-1+steamos1 (2014-12-04)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d877ffff] usable
BIOS-e820: [mem 0x00000000d8780000-0x00000000d8786fff] ACPI NVS
BIOS-e820: [mem 0x00000000d8787000-0x00000000d8bd4fff] usable
BIOS-e820: [mem 0x00000000d8bd5000-0x00000000d91e5fff] reserved
BIOS-e820: [mem 0x00000000d91e6000-0x00000000ddf5cfff] usable
BIOS-e820: [mem 0x00000000ddf5d000-0x00000000ddff2fff] reserved
BIOS-e820: [mem 0x00000000ddff3000-0x00000000de103fff] usable
BIOS-e820: [mem 0x00000000de104000-0x00000000de53efff] ACPI NVS
BIOS-e820: [mem 0x00000000de53f000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7916/Z97 GAMING 7 (MS-7916), BIOS V1.11 08/14/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda20-0x000fda2f] mapped at [ffff8800000fda20]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01871000, 0x01871fff] PGTABLE
BRK [0x01872000, 0x01872fff] PGTABLE
BRK [0x01873000, 0x01873fff] PGTABLE
init_memory_mapping: [mem 0x41ee00000-0x41effffff]
[mem 0x41ee00000-0x41effffff] page 2M
BRK [0x01874000, 0x01874fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41edfffff]
[mem 0x41c000000-0x41edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xd877ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xd85fffff] page 2M
[mem 0xd8600000-0xd877ffff] page 4k
init_memory_mapping: [mem 0xd8787000-0xd8bd4fff]
[mem 0xd8787000-0xd87fffff] page 4k
[mem 0xd8800000-0xd89fffff] page 2M
[mem 0xd8a00000-0xd8bd4fff] page 4k
BRK [0x01875000, 0x01875fff] PGTABLE
init_memory_mapping: [mem 0xd91e6000-0xddf5cfff]
[mem 0xd91e6000-0xd91fffff] page 4k
[mem 0xd9200000-0xdddfffff] page 2M
[mem 0xdde00000-0xddf5cfff] page 4k
BRK [0x01876000, 0x01876fff] PGTABLE
init_memory_mapping: [mem 0xddff3000-0xde103fff]
[mem 0xddff3000-0xde103fff] page 4k
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x3671e000-0x37386fff]
ACPI: RSDP 00000000000f0580 00024 (v02 ALASKA)
ACPI: XSDT 00000000de508088 00094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000de51aa98 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000de5081b8 128DB (v02 ALASKA A M I 00000023 INTL 20120711)
ACPI: FACS 00000000de53ef80 00040
ACPI: APIC 00000000de51aba8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000de51ac20 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 00000000de51ac68 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 00000000de51ad08 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000de51adb0 00C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 00000000de51ba30 00539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000de51bf70 00B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 00000000de51cae8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000de51cb28 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000de51cb60 0036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000de51ced0 05835 (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: UEFI 00000000de522708 00042 (v01 ALASKA A M I 01072009 00000000)
ACPI: DMAR 00000000de522750 00080 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
Initmem setup node 0 [mem 0x00000000-0x41effffff]
NODE_DATA [mem 0x41eff7000-0x41effafff]
[ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040e600000-ffff88041c7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xd877ffff]
node 0: [mem 0xd8787000-0xd8bd4fff]
node 0: [mem 0xd91e6000-0xddf5cfff]
node 0: [mem 0xddff3000-0xde103fff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x41effffff]
On node 0 totalpages: 4180467
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12357 pages used for memmap
DMA32 zone: 903767 pages, LIFO batch:31
Normal zone: 44744 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000d8780000 - 00000000d8787000
PM: Registered nosave memory: 00000000d8bd5000 - 00000000d91e6000
PM: Registered nosave memory: 00000000ddf5d000 - 00000000ddff3000
PM: Registered nosave memory: 00000000de104000 - 00000000de53f000
PM: Registered nosave memory: 00000000de53f000 - 00000000defff000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s84928 r8192 d21568 u524288
pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4123289
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16402192k/17285120k available (3696k kernel code, 563252k absent, 319676k reserved, 3085k data, 916k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3999.947 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.89 BogoMIPS (lpj=15999788)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000dee95000 end: 0x000000deea4fff
IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
CPU1 microcode updated early to revision 0x20, date = 2016-03-16
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2 microcode updated early to revision 0x20, date = 2016-03-16
smpboot: Booting Node 0, Processors #1 #2 #3 OK
CPU3 microcode updated early to revision 0x20, date = 2016-03-16
Brought up 4 CPUs
smpboot: Total of 4 processors activated (31999.57 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xd8780000-0xd8786fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xde104000-0xde53efff] (4435968 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 6 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000ddfc0c18 003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000ddfc0618 005AA (v02 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v02 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000ddfbfd98 00119 (v02 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v02 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: host bridge window expanded to [mem 0xe0000000-0xfeafffff]; [mem 0xfe101000-0xfe113fff] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7400000-0xf740ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7419000-0xf741900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7417000-0xf74173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7410000-0xf7413fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7416000-0xf74163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7415000-0xf74157ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7414000-0xf74140ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1004] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 10: [io 0xd050-0xd057]
pci 0000:03:00.0: reg 14: [io 0xd040-0xd043]
pci 0000:03:00.0: reg 18: [io 0xd030-0xd037]
pci 0000:03:00.0: reg 1c: [io 0xd020-0xd023]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 24: [mem 0xf7300000-0xf73001ff]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xf7200000-0xf723ffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xc000-0xc07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:05:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:05:00.0: PME# supported from D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:06:00.0: [1b21:1184] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 06-0b]
pci 0000:07:01.0: [1b21:1184] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: [1b21:1184] type 01 class 0x060400
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: [1b21:1184] type 01 class 0x060400
pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: [1b21:1184] type 01 class 0x060400
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:03.0: PCI bridge to [bus 09]
pci 0000:07:05.0: PCI bridge to [bus 0a]
pci 0000:07:07.0: PCI bridge to [bus 0b]
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd8780000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd8bd5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xddf5d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde104000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0b: [mem 0xf7ff0000-0xf7ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:03.0: PCI bridge to [bus 09]
pci 0000:07:05.0: PCI bridge to [bus 0a]
pci 0000:07:07.0: PCI bridge to [bus 0b]
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:00:1c.6: PCI bridge to [bus 06-0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12708k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9f5d000-0xddf5d000] (64MB) mapped at [ffff8800d9f5d000-ffff8800ddf5cfff]
audit: initializing netlink socket (disabled)
type=2000 audit(1471080432.416:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32060
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:06:00.0: irq 42 for MSI/MSI-X
pcieport 0000:07:01.0: irq 43 for MSI/MSI-X
pcieport 0000:07:03.0: irq 44 for MSI/MSI-X
pcieport 0000:07:05.0: irq 45 for MSI/MSI-X
pcieport 0000:07:07.0: irq 46 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005c80000, using 8128k, total 8128k
Console: switching consoles 2-6 to frame buffer device
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
regulator-dummy: disabling
rtc_cmos 00:06: setting system clock to 2016-08-13 09:27:13 UTC (1471080433)
Freeing unused kernel memory: 916k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 392k freed
Freeing unused kernel memory: 484k freed
udevd[68]: starting version 175
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-5-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
ACPI: bus type ATA registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-5-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:34:fd:3e]
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7417000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-5-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: setting latency timer to 64
xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-5-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10-5-amd64 xhci_hcd
usb usb5: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7416000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.10-5-amd64 ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7415000 port 0xf7415200 irq 53
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:03:00.0: irq 54 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300100 irq 54
ata8: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300180 irq 54
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=045e, idProduct=028e
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Controller
usb 1-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 1-1: SerialNumber: 0FEEA69
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: OCZ-VERTEX3 MI, 2.15, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 MI 2.15 PQ: 0 ANSI: 5
usb 1-3: new high-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=174c, idProduct=2074
usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-3: Product: ASM107x
usb 1-3: Manufacturer: Asmedia
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-5: new low-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=1a2c, idProduct=0e24
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Keyboard
usb 1-5: Manufacturer: SEM
usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input0
hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-5/input0
input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/input/input1
hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-5/input1
ata8: SATA link down (SStatus 0 SControl 300)
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda2 sda5
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x20
platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x20
platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x20
platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x20
platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-3: New USB device found, idVendor=174c, idProduct=3074
usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 2-3: Product: ASM107x
usb 2-3: Manufacturer: Asmedia
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3999.996 MHz
Switching to clocksource tsc
udevd[496]: starting version 175
usb 3-1: new high-speed USB device number 2 using ehci-pci
ACPI: Requesting acpi_cpufreq
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
wmi: Mapper loaded
nvidia_drm: module license 'MIT' taints kernel.
Disabling lock debugging due to kernel taint
input: PC Speaker as /devices/platform/pcspkr/input/input5
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
usbcore: registered new interface driver xpad
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input6
hda_codec: ALC1150: SKU not ready 0x00000000
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
usb 3-1: New USB device found, idVendor=8087, idProduct=8009
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: new low-speed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=046d, idProduct=c01d
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB-PS/2 Optical Mouse
usb 4-1: Manufacturer: Logitech
usb 4-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb4/4-1/4-1:1.0/input/input16
hid-generic 0003:046D:C01D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:00.0-1/input0
usb 6-1: new high-speed USB device number 2 using ehci-pci
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 250
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.35 Mon Jul 11 23:14:21 PDT 2016
usb 6-1: New USB device found, idVendor=8087, idProduct=8001
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
alx 0000:04:00.0: irq 57 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
alx 0000:04:00.0 eth1: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
nvidia 0000:01:00.0: irq 58 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.35 Mon Jul 11 22:43:59 PDT 2016
nvidia-modeset: Allocated GPU:0 (GPU-13ebcc42-5bba-36df-e996-163bef7307b0) @ PCI:0000:01:00.0
ata3.00: exception Emask 0x10 SAct 0xf000 SErr 0x400100 action 0x6 frozen
ata3.00: irq_stat 0x08000000, interface fatal error
ata3: SError: { UnrecovData Handshk }
ata3.00: failed command: WRITE FPDMA QUEUED
ata3.00: cmd 61/00:60:00:e8:51/04:00:06:00:00/40 tag 12 ncq 524288 out
res 40/00:78:00:f4:51/00:00:06:00:00/40 Emask 0x10 (ATA bus error)
ata3.00: status: { DRDY }
ata3.00: failed command: WRITE FPDMA QUEUED
ata3.00: cmd 61/00:68:00:ec:51/04:00:06:00:00/40 tag 13 ncq 524288 out
res 40/00:78:00:f4:51/00:00:06:00:00/40 Emask 0x10 (ATA bus error)
ata3.00: status: { DRDY }
ata3.00: failed command: WRITE FPDMA QUEUED
ata3.00: cmd 61/00:70:00:f0:51/04:00:06:00:00/40 tag 14 ncq 524288 out
res 40/00:78:00:f4:51/00:00:06:00:00/40 Emask 0x10 (ATA bus error)
ata3.00: status: { DRDY }
ata3.00: failed command: WRITE FPDMA QUEUED
ata3.00: cmd 61/98:78:00:f4:51/00:00:06:00:00/40 tag 15 ncq 77824 out
res 40/00:78:00:f4:51/00:00:06:00:00/40 Emask 0x10 (ATA bus error)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 35748)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 50787)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 50787)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 50787)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 50787)
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 86287)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 119247)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 119247)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 119247)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 119247)
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf samples too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Core temperature above threshold, cpu clock throttled (total events = 99320)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 135887)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 135887)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 135887)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 135887)
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged