dmesg - 4.2-3.dmz.1-liquorix
Linux version 4.2-3.dmz.1-liquorix-amd64 (Debian 4.2-6) () (gcc version 4.9.3 (Debian 4.9.3-4) ) #1 ZEN SMP PREEMPT Debian 4.2-6 (2015-10-03)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009bd4bfff] usable
BIOS-e820: [mem 0x000000009bd4c000-0x000000009bd52fff] ACPI NVS
BIOS-e820: [mem 0x000000009bd53000-0x000000009c7fcfff] usable
BIOS-e820: [mem 0x000000009c7fd000-0x000000009ccf5fff] reserved
BIOS-e820: [mem 0x000000009ccf6000-0x00000000ba3d5fff] usable
BIOS-e820: [mem 0x00000000ba3d6000-0x00000000ba467fff] reserved
BIOS-e820: [mem 0x00000000ba468000-0x00000000ba4cffff] usable
BIOS-e820: [mem 0x00000000ba4d0000-0x00000000ba612fff] ACPI NVS
BIOS-e820: [mem 0x00000000ba613000-0x00000000bdf47fff] reserved
BIOS-e820: [mem 0x00000000bdf48000-0x00000000bdffefff] type 20
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xba5d8000 ACPI=0xba5d8000 SMBIOS=0xf04c0 MPS=0xfd440
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97-HD3P/Z97-HD3P, BIOS F3 04/21/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 00C0000000 mask 7FC0000000 uncachable
3 base 00BF000000 mask 7FFF000000 uncachable
4 base 041FE00000 mask 7FFFE00000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3056MB, range: 16MB, type UC
reg 4, base: 16894MB, range: 2MB, type UC
total RAM covered: 15854M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16894MB, range: 2MB, type UC
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01a8f000, 0x01a8ffff] PGTABLE
BRK [0x01a90000, 0x01a90fff] PGTABLE
BRK [0x01a91000, 0x01a91fff] PGTABLE
init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[mem 0x41fc00000-0x41fdfffff] page 2M
BRK [0x01a92000, 0x01a92fff] PGTABLE
init_memory_mapping: [mem 0x400000000-0x41fbfffff]
[mem 0x400000000-0x41fbfffff] page 2M
init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[mem 0x3e0000000-0x3ffffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x9bd4bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9bbfffff] page 2M
[mem 0x9bc00000-0x9bd4bfff] page 4k
init_memory_mapping: [mem 0x9bd53000-0x9c7fcfff]
[mem 0x9bd53000-0x9bdfffff] page 4k
[mem 0x9be00000-0x9c5fffff] page 2M
[mem 0x9c600000-0x9c7fcfff] page 4k
BRK [0x01a93000, 0x01a93fff] PGTABLE
init_memory_mapping: [mem 0x9ccf6000-0xba3d5fff]
[mem 0x9ccf6000-0x9cdfffff] page 4k
[mem 0x9ce00000-0xba1fffff] page 2M
[mem 0xba200000-0xba3d5fff] page 4k
BRK [0x01a94000, 0x01a94fff] PGTABLE
init_memory_mapping: [mem 0xba468000-0xba4cffff]
[mem 0xba468000-0xba4cffff] page 4k
init_memory_mapping: [mem 0xbdfff000-0xbdffffff]
[mem 0xbdfff000-0xbdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[mem 0x100000000-0x3dfffffff] page 1G
RAMDISK: [mem 0x342d6000-0x36162fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BA5D8000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BA5D8080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BA5E8948 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BA5D8190 0107B7 (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 0x00000000BA611080 000040
ACPI: APIC 0x00000000BA5E8A58 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BA5E8AF0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BA5E8B38 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BA5E9728 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000BA5E9C68 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000BA5EA7E0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BA5EA820 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BA5EA858 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BA5EABC8 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: BGRT 0x00000000BA5F0728 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
NODE_DATA(0) allocated [mem 0x41fdf7000-0x41fdfafff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fc00000-ffff88041f3fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000009bd4bfff]
node 0: [mem 0x000000009bd53000-0x000000009c7fcfff]
node 0: [mem 0x000000009ccf6000-0x00000000ba3d5fff]
node 0: [mem 0x00000000ba468000-0x00000000ba4cffff]
node 0: [mem 0x00000000bdfff000-0x00000000bdffffff]
node 0: [mem 0x0000000100000000-0x000000041fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
On node 0 totalpages: 4037852
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11837 pages used for memmap
DMA32 zone: 757567 pages, LIFO batch:31
Normal zone: 51192 pages used for memmap
Normal zone: 3276288 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbf200000-0xdf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9bd4c000-0x9bd52fff]
PM: Registered nosave memory: [mem 0x9c7fd000-0x9ccf5fff]
PM: Registered nosave memory: [mem 0xba3d6000-0xba467fff]
PM: Registered nosave memory: [mem 0xba4d0000-0xba612fff]
PM: Registered nosave memory: [mem 0xba613000-0xbdf47fff]
PM: Registered nosave memory: [mem 0xbdf48000-0xbdffefff]
PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88041fa00000 s92504 r8192 d30376 u262144
pcpu-alloc: s92504 r8192 d30376 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3974734
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15576168K/16151408K available (5386K kernel code, 817K rwdata, 2768K rodata, 1048K init, 744K bss, 575240K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 4000.178 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.35 BogoMIPS (lpj=4000178)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff819ce000 - ffffffff819d3000)
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64002.84 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9bd4c000-0x9bd52fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xba4d0000-0xba612fff] (1323008 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
prandom: seed boundary self test passed
prandom: 100 self tests passed
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D944400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D939800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D952C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9bd4c000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9c7fd000-0x9fffffff]
e820: reserve RAM buffer [mem 0xba3d6000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba4d0000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31284K (ffff8800342d6000 - ffff880036163000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa9267000-0xad267000] (64MB) mapped at [ffff8800a9267000-ffff8800ad266fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x300000 bytes, mapped to 0xffffc90001c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1444752047.383:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r9
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
xenfs: not registering filesystem on non-xen platform
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
PCCT header not found.
Key type dns_resolver registered
Loading compiled-in X.509 certificates
registered taskstats version 1
zswap: loading zswap
zpool: no driver for type zbud
zswap: zbud zpool not available
zswap: zpool creation failed
Key type encrypted registered
evm: HMAC attrs: 0x1
Freeing unused kernel memory: 1048K (ffffffff818c8000 - ffffffff819ce000)
random: systemd-udevd urandom read with 1 bits of entropy available
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized drm 1.1.0 20060810
SCSI subsystem initialized
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc900020a2000, fc:aa:14:95:08:e7, XID 0c000800 IRQ 25
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2-3.dmz.1-liquorix-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
r8169 0000:02:00.0 enp2s0: renamed from eth0
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2-3.dmz.1-liquorix-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2-3.dmz.1-liquorix-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2-3.dmz.1-liquorix-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:16: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19100 irq 28
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-9: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: OCZ-TRION100, SAFM11.1, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-TRION100 11.1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-9: New USB device found, idVendor=05e3, idProduct=0608
usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-9: Product: USB2.0 Hub
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target Slices.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 3-9.3: new low-speed USB device number 3 using xhci_hcd
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
usb 3-9.3: New USB device found, idVendor=04f2, idProduct=0833
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.3: Product: USB Keyboard
usb 3-9.3: Manufacturer: CHICONY
usb 3-9.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
lp0: using parport0 (interrupt-driven).
lp0: console ready
tsc: Refined TSC clocksource calibration: 3999.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b459580, max_idle_ns: 881591204237 ns
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[278]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
sd 0:0:0:0: Attached scsi generic sg0 type 0
EFI Variables Facility v0.08 2004-May-17
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/0003:04F2:0833.0001/input/input7
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
Adding 16151548k swap on /dev/sda3. Priority:-1 extents:1 across:16151548k SSFS
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-9.3/input0
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:04F2:0833.0002/input/input19
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-9.3/input1
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
random: nonblocking pool is initialized
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
fuse init (API version 7.23)
clocksource: Switched to clocksource tsc
usb 3-9.4: new full-speed USB device number 4 using xhci_hcd
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 3-9.4: New USB device found, idVendor=1532, idProduct=0101
usb 3-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.4: Product: Razer Copperhead Laser Mouse
usb 3-9.4: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4:1.0/0003:1532:0101.0003/input/input20
hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-9.4/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4:1.1/0003:1532:0101.0004/input/input21
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-9.4/input1
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
NET: Registered protocol family 17
conftest[21680]: segfault at 0 ip 00000000004005c0 sp 00007ffd41a9c4e0 error 4 in conftest[400000+1000]
conftest[21709]: segfault at 0 ip 00007fb719f19cba sp 00007ffe13b615e8 error 4 in libc-2.21.so[7fb719e7a000+1c0000]