dmesg - FX8350-fake-turbo-on-test-3

Return To FX8350-fake-turbo-on-test-3 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16-0.bpo.3-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.5-1~bpo70+1 (2014-11-02)
Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64 root=/dev/mapper/pdc_cgcigjabc1 ro iommu=soft quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000093fff] usable
BIOS-e820: [mem 0x0000000000094000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba7fcfff] usable
BIOS-e820: [mem 0x00000000be85d000-0x00000000bea3cfff] reserved
BIOS-e820: [mem 0x00000000bea3d000-0x00000000bea46fff] ACPI data
BIOS-e820: [mem 0x00000000bea47000-0x00000000bee36fff] ACPI NVS
BIOS-e820: [mem 0x00000000bee37000-0x00000000bf159fff] reserved
BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100094000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-DAFFF write-protect
  DB000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000BF800000 mask FFFFFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000043f000000 aka 17392M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
Base memory trampoline at [ffff88000008e000] 8e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01af1000, 0x01af1fff] PGTABLE
BRK [0x01af2000, 0x01af2fff] PGTABLE
BRK [0x01af3000, 0x01af3fff] PGTABLE
init_memory_mapping: [mem 0x43ee00000-0x43effffff]
 [mem 0x43ee00000-0x43effffff] page 2M
BRK [0x01af4000, 0x01af4fff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43edfffff]
 [mem 0x43c000000-0x43edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
 [mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xba7fcfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xba5fffff] page 2M
 [mem 0xba600000-0xba7fcfff] page 4k
init_memory_mapping: [mem 0xbf15a000-0xbf15afff]
 [mem 0xbf15a000-0xbf15afff] page 4k
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0xbf361000-0xbf7fffff]
 [mem 0xbf361000-0xbf3fffff] page 4k
 [mem 0xbf400000-0xbf7fffff] page 2M
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x100094000-0x3ffffffff]
 [mem 0x100094000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x36324000-0x37189fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BEA3F068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BEA44D18 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI: DSDT 0x00000000BEA3F150 005BC1 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000BEE31F80 000040
ACPI: APIC 0x00000000BEA44E10 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BEA44EB0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000BEA44EF8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000BEA44F38 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000BEA44F70 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
  NODE_DATA [mem 0x43eff7000-0x43effbfff]
 [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042e600000-ffff88043c5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00093fff]
  node   0: [mem 0x00100000-0xba7fcfff]
  node   0: [mem 0xbf15a000-0xbf15afff]
  node   0: [mem 0xbf361000-0xbf7fffff]
  node   0: [mem 0x100094000-0x43effffff]
On node 0 totalpages: 4168604
  DMA zone: 56 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3987 pages, LIFO batch:0
  DMA32 zone: 10405 pages used for memmap
  DMA32 zone: 760989 pages, LIFO batch:31
  Normal zone: 46536 pages used for memmap
  Normal zone: 3403628 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x00094000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba7fd000-0xbe85cfff]
PM: Registered nosave memory: [mem 0xbe85d000-0xbea3cfff]
PM: Registered nosave memory: [mem 0xbea3d000-0xbea46fff]
PM: Registered nosave memory: [mem 0xbea47000-0xbee36fff]
PM: Registered nosave memory: [mem 0xbee37000-0xbf159fff]
PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100093fff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s85696 r8192 d20800 u262144
pcpu-alloc: s85696 r8192 d20800 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4111586
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64 root=/dev/mapper/pdc_cgcigjabc1 ro iommu=soft quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 16351744K/16674416K available (5426K kernel code, 936K rwdata, 1824K rodata, 1204K init, 840K bss, 322672K reserved)
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4219.698 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8439.39 BogoMIPS (lpj=16878792)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000)
ftrace: allocating 21544 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67515.16 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbea47000-0xbee36fff] (4128768 bytes)
PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4393] type 00 class 0x010400
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6610] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io  0xd040-0xd047]
pci 0000:03:00.0: reg 0x14: [io  0xd030-0xd033]
pci 0000:03:00.0: reg 0x18: [io  0xd020-0xd027]
pci 0000:03:00.0: reg 0x1c: [io  0xd010-0xd013]
pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd00f]
pci 0000:03:00.0: reg 0x24: [mem 0xfe810000-0xfe8101ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfe800000-0xfe80ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:0e.0: reg 0x10: [mem 0xfe700000-0xfe7007ff]
pci 0000:04:0e.0: reg 0x14: [io  0xc000-0xc07f]
pci 0000:04:0e.0: supports D2
pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io  0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe600000-0xfe600fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00094000-0x0009ffff]
e820: reserve RAM buffer [mem 0xba7fd000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] could not be reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0220-0x0227] has been reserved
system 00:02: [io  0x0228-0x0237] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x03af]
pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14744K (ffff880036324000 - ffff88003718a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb67fd000-0xba7fd000] (64MB) mapped at [ffff8800b67fd000-ffff8800ba7fcfff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1422169835.876:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31965
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2015-01-25 07:10:36 UTC (1422169836)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818eb000 - ffffffff81a18000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 708K (ffff88000154f000 - ffff880001600000)
Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
udevd[89]: starting version 175
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
ohci-pci: OHCI PCI platform driver
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16-0.bpo.3-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:02:00.0
ohci-pci 0000:00:12.0: OHCI PCI host controller
ehci-pci: EHCI PCI platform driver
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16-0.bpo.3-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 73 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018ba000, fc:aa:14:22:44:1d, XID 0c900800 IRQ 73
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
libata version 3.00 loaded.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.16-0.bpo.3-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:12.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16-0.bpo.3-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.16-0.bpo.3-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16-0.bpo.3-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:16.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
usb 1-1: new high-speed USB device number 2 using xhci_hcd
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.16-0.bpo.3-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:12.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.16-0.bpo.3-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:13.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
usb 1-1: New USB device found, idVendor=2109, idProduct=3431
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
firewire_core 0000:04:0e.0: created device fw0: GUID 0035d474c18f8b00, S400
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 9
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: EHCI Host Controller
usb usb9: Manufacturer: Linux 3.16-0.bpo.3-amd64 ehci_hcd
usb usb9: SerialNumber: 0000:00:16.2
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ahci 0000:03:00.0: irq 74 for MSI/MSI-X
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810100 irq 74
ata8: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810180 irq 74
tsc: Refined TSC clocksource calibration: 4219.226 MHz
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATAPI: ATAPI   iHAS124   E, 4L06, max UDMA/100
ata5.00: configured for UDMA/100
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
scsi 4:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L06 PQ: 0 ANSI: 5
usb 2-3: new low-speed USB device number 2 using ohci-pci
scsi 5:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < >
sda: partition table partially beyond EOD, enabling native capacity
 sda: sda1 sda2 < >
sda: partition table partially beyond EOD, truncated
sda: p1 size 445950976 extends beyond EOD, truncated
sda: p2 start 445951486 is beyond EOD, truncated
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 4:0:0:0: Attached scsi generic sg2 type 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
 sdc: sdc2 < sdc5 >
sd 5:0:0:0: [sdc] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
usb 2-3: New USB device found, idVendor=04d9, idProduct=1702
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Keyboard
usb 2-3: Manufacturer:  
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/0003:04D9:1702.0001/input/input2
hid-generic 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:12.0-3/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.1/0003:04D9:1702.0002/input/input3
hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:12.0-3/input1
platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd_fam15h.bin
microcode: CPU0: new patch_level=0x06000832
microcode: CPU2: new patch_level=0x06000832
microcode: CPU4: new patch_level=0x06000832
microcode: CPU6: new patch_level=0x06000832
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-4: new low-speed USB device number 3 using ohci-pci
udevd[563]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
acpi-cpufreq: overriding BIOS provided _PSD data
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc900018b0b00). heartbeat=60 sec (nowayout=0)
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (OLAND 0x1002:0x6610 0x1043:0x0462).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
ATOM BIOS: 6610HB.15.44.0.2.AS01
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[TTM] Zone  kernel: Available graphics memory: 8184322 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading OLAND Microcode
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_pfp.bin
input: PC Speaker as /devices/platform/pcspkr/input/input6
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_me.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_ce.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_rlc.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_mc2.bin
[drm] radeon/OLAND_mc2.bin: 31452 bytes
random: nonblocking pool is initialized
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/OLAND_smc.bin
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
AVX version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[drm] radeon: dpm initialized
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] PCIE gen 2 link speeds already enabled
alg: No test for crc32 (crc32-pclmul)
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042c6eac00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88042c6eac04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88042c6eac08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042c6eac0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88042c6eac10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900122b5a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 75 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x11/0x1e
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
usb 2-4: New USB device found, idVendor=046d, idProduct=c05a
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Optical Mouse
usb 2-4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-4/2-4:1.0/0003:046D:C05A.0003/input/input16
hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-4/input0
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
Switched to clocksource tsc
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
usb 8-5: new high-speed USB device number 3 using ehci-pci
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD2
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0478000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
usb 8-5: New USB device found, idVendor=041e, idProduct=4088
usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-5: Product: VF0700 Live! Cam Chat HD
usb 8-5: Manufacturer: Creative Technology Ltd.
usb 8-5: SerialNumber: 1H190704
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 76 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
usb 4-4: new full-speed USB device number 2 using ohci-pci
usb 4-4: New USB device found, idVendor=04f9, idProduct=001b
usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:13.2/usb8/8-5/8-5:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usblp 4-4:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x001B
usbcore: registered new interface driver usblp
usb 8-5: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 8-5: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
usbcore: registered new interface driver snd-usb-audio
EXT4-fs (dm-1): re-mounted. Opts: (null)
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8728F chip at 0x228, revision 1
it87: Beeping is supported
fuse init (API version 7.23)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [email protected]).
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To FX8350-fake-turbo-on-test-3 System Information