dmesg - P5020-8GB
Allocated 4096 bytes for 4 pacas at c00000000ffff000
Using Cyrus machine description
MMU: Supported page sizes
4 KB as direct
1024 KB as direct
2048 KB as direct
4096 KB as direct
16384 KB as direct
65536 KB as direct
262144 KB as direct
1048576 KB as direct
MMU: Book3E HW tablewalk not supported
No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
Qman ver:0a01,01,02
No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
Bman ver:0a02,01,00
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
No USDPAA memory, no 'usdpaa_mem' bootarg
Found legacy serial port 0 for /soc@ffe000000/serial@11c500
mem=ffe11c500, taddr=ffe11c500, irq=0, clk=399000000, speed=0
Found legacy serial port 1 for /soc@ffe000000/serial@11c600
mem=ffe11c600, taddr=ffe11c600, irq=0, clk=399000000, speed=0
Found legacy serial port 2 for /soc@ffe000000/serial@11d500
mem=ffe11d500, taddr=ffe11d500, irq=0, clk=399000000, speed=0
Found legacy serial port 3 for /soc@ffe000000/serial@11d600
mem=ffe11d600, taddr=ffe11d600, irq=0, clk=399000000, speed=0
CPU maps initialized for 1 thread per core
(thread shift is 0)
Starting Linux PPC64 #5 SMP Thu Sep 4 14:43:25 PDT 2014
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x200000000
ppc64_caches.dcache_line_size = 0x40
ppc64_caches.icache_line_size = 0x40
-----------------------------------------------------
Linux version 3.8.13-rt9ajp1 (root@cyrus) (gcc version 4.9.1 (Debian 4.9.1-4) ) #5 SMP Thu Sep 4 14:43:25 PDT 2014
[boot]0012 Setup Arch
Cyrus board from Varisys
Top of RAM: 0x200000000, Total RAM: 0x200000000
Memory hole size: 0MB
Zone ranges:
DMA [mem 0x00000000-0x7fffffff]
Normal [mem 0x80000000-0x1ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x1ffffffff]
On node 0 totalpages: 2097152
free_area_init_node: node 0, pgdat c000000001088140, node_mem_map c000000003ff2000
DMA zone: 7168 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 517120 pages, LIFO batch:31
Normal zone: 21504 pages used for memmap
Normal zone: 1551360 pages, LIFO batch:31
MMU: Allocated 2112 bytes of context maps for 255 contexts
[boot]0015 Setup Done
PERCPU: Embedded 11 pages/cpu @c00000000b100000 s14976 r0 d30080 u524288
pcpu-alloc: s14976 r0 d30080 u524288 alloc=1*1048576
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068480
Kernel command line: root=/dev/sda1 console=ttyS0,115200n8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 8063348k/8388608k available (16544k kernel code, 325260k reserved, 1508k data, 992k bss, 336k init)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 2 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
time_init: decrementer frequency = 24.937500 MHz
time_init: processor frequency = 1995.000000 MHz
clocksource: timebase mult[2819aa06] shift[24] registered
clockevent: decrementer mult[6624dd3] shift[32] cpu[0]
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mpic: requesting IPIs...
e500 family performance monitor hardware support registered
Brought up 2 CPUs
devtmpfs: initialized
xor: measuring software checksum speed
8regs : 4245.000 MB/sec
8regs_prefetch: 3703.000 MB/sec
32regs : 4103.000 MB/sec
32regs_prefetch: 3571.000 MB/sec
xor: using function: 8regs (4245.000 MB/sec)
NET: Registered protocol family 16
software IO TLB [mem 0x10000000-0x14000000] (64MB) mapped at [c000000010000000-c000000013ffffff]
PCI: Probing PCI hardware
PCI: Probing PCI hardware done
bio: create slab at 0
raid6: int64x1 736 MB/s
raid6: int64x2 1199 MB/s
raid6: int64x4 1666 MB/s
raid6: int64x8 1429 MB/s
raid6: using algorithm int64x4 (1666 MB/s)
raid6: using intx1 recovery algorithm
Freescale Elo series DMA driver
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Bman err interrupt handler present
Bman portal initialised, cpu 0
Bman portal initialised, cpu 1
Bman portals initialised
Qman err interrupt handler present
QMan: Allocated lookup table at 8000000000000000, entry count 65537
Qman portal initialised, cpu 0
Qman portal initialised, cpu 1
Qman portals initialised
Bman: BPID allocator includes range 32:32
Qman: FQID allocator includes range 256:256
Qman: FQID allocator includes range 32768:32768
Qman: CGRID allocator includes range 0:256
Qman: pool channel allocator includes range 33:15
Advanced Linux Sound Architecture Driver Initialized.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Setting up Freescale MSI support
Setting up Freescale MSI support
Setting up Freescale MSI support
fsl-rcpm ffe0e2000.global-utilities: Freescale RCPM driver
fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe200000 (primary) ranges:
MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
/pcie@ffe200000: PCICSRBAR @ 0xdf000000
/pcie@ffe200000: Setup 64-bit PCI DMA window
/pcie@ffe200000: DMA window size is 0xdf000000
fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0000:00: root bus resource [bus 00-01]
pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff
pci 0000:00:00.0: [1957:0421] type 01 class 0x0b2000
pci 0000:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc00000000-0xc0fffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc10000000-0xc1001ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x11000-0x110ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xc10020000-0xc10023fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [io 0x11000-0x11fff]
pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc100fffff]
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
pci 0000:00:00.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000
pci 0000:00:00.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x1000000)
pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x300000)
pci 0000:01:00.0: BAR 6: assigned [mem 0xc10040000-0xc1005ffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff]
pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff]
pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff]
pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8
PCI host bridge /pcie@ffe201000 ranges:
MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000
IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
/pcie@ffe201000: PCICSRBAR @ 0xdf000000
/pcie@ffe201000: Setup 64-bit PCI DMA window
/pcie@ffe201000: DMA window size is 0xdf000000
fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff])
pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0001:00: root bus resource [bus 00-08]
pci_bus 0001:00: busn_res: [bus 00-08] end is updated to ff
pci 0001:00:00.0: [1957:0421] type 01 class 0x0b2000
pci 0001:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
pci 0001:00:00.0: supports D1 D2
pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:01:00.0: [111d:8092] type 01 class 0x060400
pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0: bridge window [io 0x22000-0x23fff]
pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc281fffff]
pci 0001:02:01.0: [111d:8092] type 01 class 0x060400
pci 0001:02:01.0: PME# supported from D0 D3hot D3cold
pci 0001:02:02.0: [111d:8092] type 01 class 0x060400
pci 0001:02:02.0: PME# supported from D0 D3hot D3cold
pci 0001:02:03.0: [111d:8092] type 01 class 0x060400
pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
pci 0001:02:08.0: [111d:8092] type 01 class 0x060400
pci 0001:02:08.0: PME# supported from D0 D3hot D3cold
pci 0001:02:10.0: [111d:8092] type 01 class 0x060400
pci 0001:02:10.0: PME# supported from D0 D3hot D3cold
pci 0001:01:00.0: PCI bridge to [bus 02-ff]
pci 0001:01:00.0: bridge window [io 0x22000-0x23fff]
pci 0001:01:00.0: bridge window [mem 0xc20000000-0xc281fffff]
pci 0001:03:00.0: [12d8:e111] type 01 class 0x060400
pci 0001:03:00.0: PME# supported from D0 D3hot D3cold
pci 0001:02:01.0: PCI bridge to [bus 03-ff]
pci 0001:02:01.0: bridge window [io 0x22000-0x22fff]
pci 0001:02:01.0: bridge window [mem 0xc20000000-0xc27ffffff]
pci 0001:04:04.0: [1095:3112] type 00 class 0x018001
pci 0001:04:04.0: reg 10: [io 0x22000-0x22007]
pci 0001:04:04.0: reg 14: [io 0x22008-0x2200b]
pci 0001:04:04.0: reg 18: [io 0x22010-0x22017]
pci 0001:04:04.0: reg 1c: [io 0x22018-0x2201b]
pci 0001:04:04.0: reg 20: [io 0x22020-0x2202f]
pci 0001:04:04.0: reg 24: [mem 0xc20000000-0xc200001ff]
pci 0001:04:04.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0001:04:04.0: supports D1 D2
pci 0001:04:05.0: [1102:0005] type 00 class 0x040100
pci 0001:04:05.0: reg 10: [io 0x22040-0x2205f]
pci 0001:04:05.0: reg 14: [mem 0xc20200000-0xc203fffff 64bit]
pci 0001:04:05.0: reg 1c: [mem 0xc24000000-0xc27ffffff 64bit]
pci 0001:04:05.0: supports D1 D2
pci 0001:03:00.0: PCI bridge to [bus 04-ff]
pci 0001:03:00.0: bridge window [io 0x22000-0x22fff]
pci 0001:03:00.0: bridge window [mem 0xc20000000-0xc27ffffff]
pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 04
pci 0001:02:02.0: PCI bridge to [bus 05-ff]
pci_bus 0001:05: busn_res: [bus 05-ff] end is updated to 05
pci 0001:06:00.0: [1814:5392] type 00 class 0x028000
pci 0001:06:00.0: reg 10: [mem 0xc28000000-0xc2800ffff]
pci 0001:02:03.0: PCI bridge to [bus 06-ff]
pci 0001:02:03.0: bridge window [mem 0xc28000000-0xc280fffff]
pci_bus 0001:06: busn_res: [bus 06-ff] end is updated to 06
pci 0001:02:08.0: PCI bridge to [bus 07-ff]
pci_bus 0001:07: busn_res: [bus 07-ff] end is updated to 07
pci 0001:08:00.0: [8086:105e] type 00 class 0x020000
pci 0001:08:00.0: reg 10: [mem 0xc28100000-0xc2811ffff]
pci 0001:08:00.0: reg 14: [mem 0xc28120000-0xc2813ffff]
pci 0001:08:00.0: reg 18: [io 0x23000-0x2301f]
pci 0001:08:00.0: PME# supported from D0 D3hot D3cold
pci 0001:08:00.1: [8086:105e] type 00 class 0x020000
pci 0001:08:00.1: reg 10: [mem 0xc28140000-0xc2815ffff]
pci 0001:08:00.1: reg 14: [mem 0xc28160000-0xc2817ffff]
pci 0001:08:00.1: reg 18: [io 0x23020-0x2303f]
pci 0001:08:00.1: PME# supported from D0 D3hot D3cold
pci 0001:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0001:02:10.0: PCI bridge to [bus 08-ff]
pci 0001:02:10.0: bridge window [io 0x23000-0x23fff]
pci 0001:02:10.0: bridge window [mem 0xc28100000-0xc281fffff]
pci_bus 0001:08: busn_res: [bus 08-ff] end is updated to 08
pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 08
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 08
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 08
PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
PCI 0001:00 Cannot reserve Legacy IO [io 0x21000-0x21fff]
pci 0000:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01-08] add_size 200000
pci 0000:00:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x200000)
pci 0001:00:00.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0001:00:00.0: BAR 0: can't assign mem (size 0x1000000)
pci 0001:00:00.0: BAR 9: can't assign mem pref (size 0x300000)
pci 0001:01:00.0: BAR 9: assigned [mem 0xc28200000-0xc282fffff pref]
pci 0001:02:01.0: BAR 9: assigned [mem 0xc28200000-0xc282fffff pref]
pci 0001:03:00.0: BAR 9: assigned [mem 0xc28200000-0xc282fffff pref]
pci 0001:04:04.0: BAR 6: assigned [mem 0xc28200000-0xc2827ffff pref]
pci 0001:03:00.0: PCI bridge to [bus 04]
pci 0001:03:00.0: bridge window [io 0x22000-0x22fff]
pci 0001:03:00.0: bridge window [mem 0xc20000000-0xc27ffffff]
pci 0001:03:00.0: bridge window [mem 0xc28200000-0xc282fffff pref]
pci 0001:02:01.0: PCI bridge to [bus 03-04]
pci 0001:02:01.0: bridge window [io 0x22000-0x22fff]
pci 0001:02:01.0: bridge window [mem 0xc20000000-0xc27ffffff]
pci 0001:02:01.0: bridge window [mem 0xc28200000-0xc282fffff pref]
pci 0001:02:02.0: PCI bridge to [bus 05]
pci 0001:02:03.0: PCI bridge to [bus 06]
pci 0001:02:03.0: bridge window [mem 0xc28000000-0xc280fffff]
pci 0001:02:08.0: PCI bridge to [bus 07]
pci 0001:02:10.0: PCI bridge to [bus 08]
pci 0001:02:10.0: bridge window [io 0x23000-0x23fff]
pci 0001:02:10.0: bridge window [mem 0xc28100000-0xc281fffff]
pci 0001:01:00.0: PCI bridge to [bus 02-08]
pci 0001:01:00.0: bridge window [io 0x22000-0x23fff]
pci 0001:01:00.0: bridge window [mem 0xc20000000-0xc281fffff]
pci 0001:01:00.0: bridge window [mem 0xc28200000-0xc282fffff pref]
pci 0001:00:00.0: PCI bridge to [bus 01-08]
pci 0001:00:00.0: bridge window [io 0x21000-0x30fff]
pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff]
pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff]
pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
pci_bus 0001:00: resource 4 [io 0x21000-0x30fff]
pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff]
pci_bus 0001:01: resource 0 [io 0x21000-0x30fff]
pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff]
pci_bus 0001:02: resource 0 [io 0x22000-0x23fff]
pci_bus 0001:02: resource 1 [mem 0xc20000000-0xc281fffff]
pci_bus 0001:02: resource 2 [mem 0xc28200000-0xc282fffff pref]
pci_bus 0001:03: resource 0 [io 0x22000-0x22fff]
pci_bus 0001:03: resource 1 [mem 0xc20000000-0xc27ffffff]
pci_bus 0001:03: resource 2 [mem 0xc28200000-0xc282fffff pref]
pci_bus 0001:04: resource 0 [io 0x22000-0x22fff]
pci_bus 0001:04: resource 1 [mem 0xc20000000-0xc27ffffff]
pci_bus 0001:04: resource 2 [mem 0xc28200000-0xc282fffff pref]
pci_bus 0001:06: resource 1 [mem 0xc28000000-0xc280fffff]
pci_bus 0001:08: resource 0 [io 0x23000-0x23fff]
pci_bus 0001:08: resource 1 [mem 0xc28100000-0xc281fffff]
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/O].
9p: Installing v9fs 9p2000 file system support
msgmni has been set to 15748
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1B0A:0x909D).
radeon: No coherent DMA available.
[drm] register mmio base: 0x10000000
[drm] register mmio size: 131072
ATOM BIOS: DeLL
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4031674 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] probing gen 2 caps for device 1957:421 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading CAICOS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xc0000001f9e82c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xc0000001f9e82c0c
irq 482: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[c0000001fffdf8b0] [c000000000008afc] .show_stack+0x7c/0x1f0 (unreliable)
[c0000001fffdf980] [c0000000000c652c] .__report_bad_irq+0x4c/0x140
[c0000001fffdfa20] [c0000000000c6cb0] .note_interrupt+0x290/0x2f0
[c0000001fffdfad0] [c0000000000c3648] .handle_irq_event_percpu+0x1c8/0x280
[c0000001fffdfba0] [c0000000000c3758] .handle_irq_event+0x58/0xc0
[c0000001fffdfc20] [c0000000000c777c] .handle_level_irq+0xbc/0x1c0
[c0000001fffdfca0] [c0000000000c285c] .generic_handle_irq+0x4c/0x80
[c0000001fffdfd20] [c00000000002ef70] .fsl_error_int_handler+0xe0/0x130
[c0000001fffdfdc0] [c0000000000c35d0] .handle_irq_event_percpu+0x150/0x280
[c0000001fffdfe90] [c0000000000c3758] .handle_irq_event+0x58/0xc0
[c0000001fffdff10] [c0000000000c805c] .handle_fasteoi_irq+0xcc/0x210
[c0000001fffdff90] [c000000000014838] .call_handle_irq+0x1c/0x2c
[c0000001fffe3ab0] [c000000000004b54] .do_IRQ+0x174/0x1e0
[c0000001fffe3b50] [c000000000000bfc] restore_check_irq_replay+0x2c/0x5c
--- Exception: 501 at .arch_local_irq_restore+0x64/0x80
LR = .arch_local_irq_restore+0x64/0x80
[c0000001fffe3e40] [c00000000008bcd4] .vtime_account+0x34/0x70 (unreliable)
[c0000001fffe3eb0] [c00000000005621c] .__do_softirq+0xbc/0x250
[c0000001fffe3f90] [c00000000001480c] .call_do_softirq+0x14/0x24
[c0000001f90a2e50] [c000000000004ee4] .do_softirq+0x104/0x140
[c0000001f90a2ef0] [c000000000056be8] .irq_exit+0xb8/0x110
[c0000001f90a2f70] [c0000000000101f8] .timer_interrupt+0x118/0x1c0
[c0000001f90a3000] [c000000000000c10] restore_check_irq_replay+0x40/0x5c
--- Exception: 901 at .evergreen_startup+0x17d0/0x2000
LR = .evergreen_startup+0x17dc/0x2000
[c0000001f90a33b0] [c0000000004fd2dc] .evergreen_init+0x1fc/0x360
[c0000001f90a3430] [c0000000004820fc] .radeon_device_init+0x55c/0x790
[c0000001f90a34d0] [c00000000048452c] .radeon_driver_load_kms+0xac/0x180
[c0000001f90a3560] [c0000000004400dc] .drm_get_pci_dev+0x1cc/0x2d0
[c0000001f90a3610] [c000000000463c48] .radeon_pci_probe+0xa8/0x100
[c0000001f90a36a0] [c0000000003b2734] .pci_device_probe+0xd4/0x140
[c0000001f90a3740] [c00000000060e974] .really_probe+0x94/0x290
[c0000001f90a37d0] [c00000000060ed18] .__driver_attach+0x108/0x110
[c0000001f90a3860] [c00000000060c044] .bus_for_each_dev+0x84/0xf0
[c0000001f90a3900] [c00000000060e314] .driver_attach+0x24/0x40
[c0000001f90a3970] [c00000000060dc20] .bus_add_driver+0xe0/0x340
[c0000001f90a3a10] [c00000000060f724] .driver_register+0x94/0x200
[c0000001f90a3aa0] [c0000000003b2424] .__pci_register_driver+0x44/0x60
[c0000001f90a3b10] [c00000000044034c] .drm_pci_init+0x16c/0x190
[c0000001f90a3bb0] [c000000000ff5488] .radeon_init+0x144/0x164
[c0000001f90a3c40] [c000000000001024] .do_one_initcall+0x164/0x1e0
[c0000001f90a3cf0] [c000000000fd4bc0] .kernel_init_freeable+0x184/0x254
[c0000001f90a3da0] [c000000000001750] .kernel_init+0x30/0x8e0
[c0000001f90a3e30] [c00000000000087c] .ret_from_kernel_thread+0x64/0xe8
handlers:
[] .fsl_pci_pme_handle
Disabling IRQ #482
[drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
radeon 0000:01:00.0: disabling GPU acceleration
radeon 0000:01:00.0: c0000001f9f0bc00 unpin not necessary
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC00142000
[drm] vram apper at 0xC00000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 68
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 69
sata_sil 0001:04:04.0: version 2.4
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xc20000000 tf 0xc20000080 irq 18
ata1: Signature Update detected @ 0 msecs
ata4: SATA max UDMA/100 mmio m512@0xc20000000 tf 0xc200000c0 irq 18
fsl_espi ffe110000.spi: master is unqueued, this is deprecated
fsl_espi ffe110000.spi: at 0x800008008012c000 (irq = 53)
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
libphy: Freescale PowerQUICC MII Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
FMAN(0) Fifo size settings:
- Total buffers available(512 - 256B/buffer)
- Total throughput(2Gbps)
- Max frame size(1522B)
- 1G ports TX 2(12 bufs set (min: 12))
- 1G ports RX 2(220 bufs set (min: 15))
- OH-HC ports 4(8)
- Shared extra buffers(16)
FMAN(0) open dma settings:
- Total open dma available(32)
- 1G ports TX 2(7)
- 1G ports RX 2(7)
- OH-HC ports 4(1)
- Shared extra open dma(0)
FMAN(0) Tnums settings:
- Total Tnums available(128)
- 1G ports TX 2(29)
- 1G ports RX 2(30)
- OH-HC ports 4(2)
- Shared extra tnums(2)
Freescale FM module (Sep 2 2014:20:37:14), FMD API version 21.1.0
Freescale FM Ports module (Sep 2 2014:20:37:16)
fsl_mac: mac.c:416:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e6000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:50:c2:20:da:ad
fsl_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e8000.ethernet: FMan MAC address: 00:50:c2:20:da:ae
fsl_mac ffe4e0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e0000) failed
fsl_mac: probe of ffe4e0000.ethernet failed with error -22
fsl_dpa: FSL DPAA Ethernet driver ()
fsl_dpa: Probed interface eth0
fsl_dpa: Probed interface eth1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
fsl_dpa_shared: FSL DPAA Shared Ethernet driver ()
fsl_dpa_proxy: FSL DPAA Proxy initialization driver ()
fsl_oh: FSL FMan Offline Parsing port driver ()
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0001:08:00.0: Disabling ASPM L1
e1000e 0001:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 16/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 310)
e1000e 0001:08:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:19:07:82
e1000e 0001:08:00.0 eth2: Intel(R) PRO/1000 Network Connection
e1000e 0001:08:00.0 eth2: MAC: 0, PHY: 4, PBA No: C57721-004
e1000e 0001:08:00.1: Disabling ASPM L1
e1000e 0001:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata2: SATA link down (SStatus 0 SControl 300)
e1000e 0001:08:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:19:07:83
e1000e 0001:08:00.1 eth3: Intel(R) PRO/1000 Network Connection
e1000e 0001:08:00.1 eth3: MAC: 0, PHY: 4, PBA No: C57721-004
fsl-of-srio ffe0c0000.rapidio: devm_request_mem_region failed
fsl-of-srio: probe of ffe0c0000.rapidio failed with error -12
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
rtc-ds1307 9-006f: rtc core: registered mcp7941x as rtc0
rtc-ds1307 9-006f: 64 bytes nvram
mpc-i2c ffe118000.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
EDAC MC: Ver: 3.0.0
ppc_corenet_cpufreq: Freescale PowerPC corenet CPU frequency scaling driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
/soc@ffe000000/sdhc@114000: voltage-ranges unspecified
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
ata4: SATA link down (SStatus 0 SControl 310)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Freescale USDPAA process driver
fsl-usdpaa: no region found
Freescale USDPAA process IRQ driver
fsl-pme ffe316000.pme: ver: 0x00100201
Freescale pme2 db driver
Freescale pme2 scan driver
fsl-pme2-scan: device pme_scan registered
fsl-of-rman ffe1e0000.rman: Of-device /soc@ffe000000/rman@1e0000 initialized
fsl-of-rman ffe1e0000.rman: RMan inbound block0 initialized.
fsl-of-rman ffe1e0000.rman: RMan inbound block1 initialized.
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA04G 3.67 GiB
fsl-of-rman ffe1e0000.rman: RMan inbound block2 initialized.
fsl-of-rman ffe1e0000.rman: RMan inbound block3 initialized.
mmcblk0: unknown partition table
Freescale hypervisor management driver
fsl-hv: no hypervisor found
usbcore: registered new interface driver snd-usb-audio
oprofile: using ppc/e500mc performance monitoring.
IPv4 over IPv4 tunneling driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
9pnet: Installing 9P2000 support
Key type dns_resolver registered
fsl_dpa_macless: FSL DPAA MACless Ethernet driver ()
rtc-ds1307 9-006f: setting system clock to 2015-01-13 02:12:04 UTC (1421115124)
ALSA device list:
#0: Loopback 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
usb 1-1: new high-speed USB device number 2 using fsl-ehci
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 336k freed
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high-speed USB device number 2 using fsl-ehci
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'ppc64'.
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Expecting device dev-ttyS0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[2752]: starting version 215
EXT3-fs (sda1): using internal journal
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
systemd-journald[1563]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 [email protected]).
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device