dmesg - 2014-12-10

Return To 2014-12-10 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.29-smp (root@hive) (gcc version 4.7.1 (GCC) ) #2 SMP Mon Sep 17 13:16:43 CDT 2012
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000accf0000 (usable)
 BIOS-e820: 00000000accf0000 - 00000000acd00000 (ACPI data)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xaccf0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
initial memory mapped : 0 - 02400000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000379fe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037800000 page 2M
 0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 23fa000-2400000
ACPI: RSDP 000e0000 00024 (v02 VBOX  )
ACPI: XSDT accf0030 00034 (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
ACPI: FACP accf00f0 000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
ACPI: DSDT accf0410 01B96 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS accf0200 00040
ACPI: SSDT accf0240 001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
No NUMA configuration found
Faking a node at 0000000000000000-00000000accf0000
node 0 pfn: [0 - accf0]
remap_alloc: node 0 [ab600000-acc00000) -> [f6200000-f7800000)
Initmem setup node 0 0000000000000000-00000000accf0000
  NODE_DATA [0000000036200000 - 0000000036201fff] (remapped)
1874MB HIGHMEM available.
889MB LOWMEM available.
max_low_pfn = 379fe, highstart_pfn = 379fe
Low memory ends at vaddr f79fe000
High memory starts at vaddr f79fe000
  mapped low ram: 0 - 379fe000
  low ram: 0 - 379fe000
Node: 0, start_pfn: 10, end_pfn: 9f
  Setting physnode_map array to node 0 for pfns:
  10 
Node: 0, start_pfn: 100, end_pfn: accf0
  Setting physnode_map array to node 0 for pfns:
  100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100 88100 8c100 90100 94100 98100 9c100 a0100 a4100 a8100 ac100 
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000379fe
  HighMem  0x000379fe -> 0x000accf0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000accf0
On node 0 totalpages: 707711
free_area_init_node: node 0, pgdat f6200000, node_mem_map f6202200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1748 pages used for memmap
  Normal zone: 221994 pages, LIFO batch:31
  HighMem zone: 3750 pages used for memmap
  HighMem zone: 476236 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at acd00000 (gap: acd00000:532c0000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f79e4000 s29696 r0 d23552 u53248
pcpu-alloc: s29696 r0 d23552 u53248 alloc=13*4096
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 702181
Policy zone: HighMem
Kernel command line: BOOT_IMAGE=Linux ro root=801 clienteCTS vt.default_utf8=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 11324928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000379fe:000accf0)
Memory: 2758068k/2831296k available (10705k kernel code, 50248k reserved, 3285k data, 668k init, 1897416k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd37000 - 0xfffff000   (2848 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
      .init : 0xc1daa000 - 0xc1e51000   ( 668 kB)
      .data : 0xc1a74702 - 0xc1da9f00   (3285 kB)
      .text : 0xc1000000 - 0xc1a74702   (10705 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f5008000 soft=f500a000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3257.494 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6514.98 BogoMIPS (lpj=3257494)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 0 MCE banks
using mwait in idle threads.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20110623
ACPI: setting ELCR to 0200 (from 0e00)
ftrace: allocating 35311 entries in 70 pages
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Enabling APIC mode:  Flat.  Using 0 I/O APICs
SMP disabled
Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
Brought up 1 CPUs
Total of 1 processors activated (6514.98 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  : 14256.000 MB/sec
xor: using function: pIII_sse (14256.000 MB/sec)
atomic64 test passed for i586+ platform with CX8 and with SSE
print_constraints: dummy: 
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab  at 0
raid6: int32x1   1613 MB/s
raid6: int32x2   1378 MB/s
raid6: int32x4   1195 MB/s
raid6: int32x8   1394 MB/s
raid6: mmxx1     5527 MB/s
raid6: mmxx2     5597 MB/s
raid6: sse1x1    4210 MB/s
raid6: sse1x2    5343 MB/s
raid6: sse2x1    8656 MB/s
raid6: sse2x2   10781 MB/s
raid6: using algorithm sse2x2 (10781 MB/s)
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xacd00000-0xffdfffff] (ignored)
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io  0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [1022:2000] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [io  0xd020-0xd03f]
pci 0000:00:03.0: reg 14: [mem 0xf0000000-0xf0000fff]
pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
pci 0000:00:04.0: reg 10: [io  0xd040-0xd05f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 0 class 0x000401
pci 0000:00:05.0: reg 10: [io  0xd100-0xd1ff]
pci 0000:00:05.0: reg 14: [io  0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 00000000accf0000 - 00000000afffffff 
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xacd00000-0xffdfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0060]
pnp 00:01: [io  0x0064]
pnp 00:01: [irq 1]
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:04: [io  0x0378-0x037f]
pnp 00:04: [io  0x0778-0x077f]
pnp 00:04: [irq 7]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:06.0: PCI INT A disabled
PCI: CLS 0 bytes, default 64
platform rtc_cmos: registered platform RTC device (no PNP device found)
Intel AES-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1418216228.398:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM installed
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 installed
msgmni has been set to 1681
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Refined TSC clocksource calibration: 3257.298 MHz.
Switching to clocksource tsc
floppy0: no floppy controllers found
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
Adaptec aacraid driver 1.1-7[28000]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi:  Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.27
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 3.0.2.2
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
mpt2sas version 10.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20101219, fixed bufsize 32768, s/g segs 256
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.29-smp ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
input: Speakup as /devices/virtual/input/input1
initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
speakup 3.1.6: initialized
synth name on entry is: (null)
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata1.01: NODEV after polling detection
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 16777216 sectors, multi 128: LBA 
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/33
scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
scsi 3:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2014-12-10 12:57:12 UTC (1418216232)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 668k freed
Write protecting the kernel text: 10708k
Write protecting the kernel read-only data: 2700k
NX-protecting the kernel data: 5676k
usb 1-1: new full-speed USB device number 2 using ohci_hcd
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
loop: module loaded
udevd[1265]: starting version 182
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
ACPI: Sleep Button [SLPF]
parport_pc 00:04: reported by Plug and Play ACPI
ppdev: user-space parallel port driver
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pcnet32 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pcnet32 0000:00:03.0: setting latency timer to 64
pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:3e:f0:9e assigned IRQ 10
pcnet32: Found PHY 0022:561b at address 0
pcnet32: eth0: registered as PCnet/FAST III 79C973
pcnet32: 1 cards_found
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
snd_intel8x0 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
snd_intel8x0 0000:00:05.0: setting latency timer to 64
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input5
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel8x0_measure_ac97_clock: measured 62001 usecs (9432 samples)
intel8x0: measured clock 152126 rejected
intel8x0_measure_ac97_clock: measured 50952 usecs (7200 samples)
intel8x0: measured clock 141309 rejected
intel8x0_measure_ac97_clock: measured 52037 usecs (7200 samples)
intel8x0: measured clock 138363 rejected
intel8x0: clocking to 48000
fuse init (API version 7.17)
EXT4-fs (sda1): re-mounted. Opts: (null)
lp: driver loaded but no devices found
Linux agpgart interface v0.103
NET: Registered protocol family 10
pcnet32 0000:00:03.0: eth0: link up, 100Mbps, full-duplex
eth0: no IPv6 routers present
ata1.00: configured for UDMA/33
ata1: EH complete
EXT4-fs (sda1): re-mounted. Opts: commit=0
usb 1-2: new full-speed USB device number 3 using ohci_hcd
usb 1-2: New USB device found, idVendor=0951, idProduct=1665
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: DataTraveler 2.0
usb 1-2: Manufacturer: Kingston
usb 1-2: SerialNumber: 08606E6D402DFDC0F715F3B3
scsi4 : usb-storage 1-2:1.0
scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk

Return To 2014-12-10 System Information