dmesg - nv33120140318_nokwin

Return To nv33120140318_nokwin System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #32~precise1-Ubuntu SMP Thu Feb 20 17:52:10 UTC 2014 (Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MSI MS-7641/880GMS-E35 (MS-7641), BIOS V10.3 11/22/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fda000, 0x01fdafff] PGTABLE
BRK [0x01fdb000, 0x01fdbfff] PGTABLE
BRK [0x01fdc000, 0x01fdcfff] PGTABLE
init_memory_mapping: [mem 0x42fe00000-0x42fffffff]
 [mem 0x42fe00000-0x42fffffff] page 2M
BRK [0x01fdd000, 0x01fddfff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42fdfffff]
 [mem 0x42c000000-0x42fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
 [mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcfdfffff] page 2M
 [mem 0xcfe00000-0xcff8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34e3e000-0x36716fff]
ACPI: RSDP 00000000000fada0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff90000 0003C (v01 7641MS A7641100 20111122 MSFT 00000097)
ACPI: FACP 00000000cff90200 00084 (v01 7641MS A7641100 20111122 MSFT 00000097)
ACPI: DSDT 00000000cff905d0 05DCA (v01  A7641 A7641100 00000100 INTL 20051117)
ACPI: FACS 00000000cff9e000 00040
ACPI: APIC 00000000cff90390 0007C (v01 7641MS A7641100 20111122 MSFT 00000097)
ACPI: MCFG 00000000cff90410 0003C (v01 7641MS OEMMCFG  20111122 MSFT 00000097)
ACPI: OEMB 00000000cff9e040 00072 (v01 7641MS A7641100 20111122 MSFT 00000097)
ACPI: SRAT 00000000cff963a0 000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: HPET 00000000cff96490 00038 (v01 7641MS OEMHPET  20111122 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x42fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x42fffffff] -> [mem 0x00000000-0x42fffffff]
Initmem setup node 0 [mem 0x00000000-0x42fffffff]
  NODE_DATA [mem 0x42fff9000-0x42fffdfff]
 [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x42fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00097fff]
  node   0: [mem 0x00100000-0xcff8ffff]
  node   0: [mem 0x100000000-0x42fffffff]
On node 0 totalpages: 4194087
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3991 pages, LIFO batch:0
  DMA32 zone: 13247 pages used for memmap
  DMA32 zone: 847760 pages, LIFO batch:31
  Normal zone: 52224 pages used for memmap
  Normal zone: 3342336 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88042fc00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4128531
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 16339856K/16776348K available (7513K kernel code, 1080K rwdata, 4076K rodata, 1392K init, 1428K bss, 436492K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.318 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.63 BogoMIPS (lpj=13601272)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 31308 entries in 123 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27202.54 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
regulator-dummy: no parameters
RTC time: 23:44:57, date: 03/17/14
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffefffff]
TOM2: 0000000430000000 aka 17152M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x430000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbfffc00-0xfbffffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbffe000-0xfbffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbfff800-0xfbfff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbffd000-0xfbffdfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbfff400-0xfbfff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbffc000-0xfbffcfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfbff3000-0xfbff3fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfbfff000-0xfbfff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xd800-0xd87f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe900000-0xfe97ffff pref]
pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:05.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io  0x0500-0x05df] has been reserved
system 00:06: [io  0x0ae0-0x0aef] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x040b] has been reserved
system 00:09: [io  0x04d6] has been reserved
system 00:09: [io  0x0c00-0x0c01] has been reserved
system 00:09: [io  0x0c14] has been reserved
system 00:09: [io  0x0c50-0x0c51] has been reserved
system 00:09: [io  0x0c52] has been reserved
system 00:09: [io  0x0c6c] has been reserved
system 00:09: [io  0x0c6f] has been reserved
system 00:09: [io  0x0cd0-0x0cd1] has been reserved
system 00:09: [io  0x0cd2-0x0cd3] has been reserved
system 00:09: [io  0x0cd4-0x0cd5] has been reserved
system 00:09: [io  0x0cd6-0x0cd7] has been reserved
system 00:09: [io  0x0cd8-0x0cdf] has been reserved
system 00:09: [io  0x0800-0x089f] could not be reserved
system 00:09: [io  0x0b00-0x0b1f] has been reserved
system 00:09: [io  0x0b20-0x0b3f] has been reserved
system 00:09: [io  0x0900-0x090f] has been reserved
system 00:09: [io  0x0910-0x091f] has been reserved
system 00:09: [io  0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:05.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25444K (ffff880034e3e000 - ffff880036717000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1395099898.556:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32092
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbfff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfbfff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfbfff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfbffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbffd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbffc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfbff3000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5465b24ef2efe2a79ebe0734c1d73e5f3e117661'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 6:384:757
tty ttyS8: hash matches
rtc_cmos 00:02: setting system clock to 2014-03-17 23:44:59 UTC (1395099899)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 668K (ffff880001759000 - ffff880001800000)
Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
udevd[124]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001816000, 8c:89:a5:15:c2:be, XID 0c900800 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff00 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff80 irq 19
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 4-3: new low-speed USB device number 2 using ohci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01118, max UDMA7
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: TS128GSSD320, 5.0.6, max UDMA/133
ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA3 MX6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      TS128GSSD320     5.0. PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
 sdb: sdb1 sdb2 sdb3 sdb4 sdb5
usb 4-3: New USB device found, idVendor=046d, idProduct=c05a
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Optical Mouse
usb 4-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input2
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3400.111 MHz
usb 4-4: new low-speed USB device number 3 using ohci-pci
usb 4-4: New USB device found, idVendor=04d9, idProduct=1603
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB Keyboard
usb 4-4: Manufacturer:  
input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input3
hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:12.0-4/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input4
hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:12.0-4/input1
vesafb: module verification failed: signature and/or required key missing - tainting kernel
xor: measuring software checksum speed
   prefetch64-sse: 13132.000 MB/sec
   generic_sse: 12732.000 MB/sec
xor: using function: prefetch64-sse (13132.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
Switched to clocksource tsc
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (445) terminated with status 5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[526]: starting version 175
EXT4-fs (sdc1): re-mounted. Opts: discard,errors=remount-ro
lp: driver loaded but no devices found
f71882fg: Found f71889ed chip at 0x500, revision 16
f71882fg f71882fg.1280: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.1280: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.1280: Fan: 3 is in duty-cycle mode
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90001874b00). heartbeat=60 sec (nowayout=0)
[drm] Initialized drm 1.1.0 20060810
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
type=1400 audit(1395078301.607:2): apparmor="STATUS" operation="profile_load" parent=669 profile="unconfined" name="/sbin/dhclient" pid=670 comm="apparmor_parser"
type=1400 audit(1395078301.607:3): apparmor="STATUS" operation="profile_load" parent=669 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=670 comm="apparmor_parser"
type=1400 audit(1395078301.607:4): apparmor="STATUS" operation="profile_load" parent=669 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=670 comm="apparmor_parser"
type=1400 audit(1395078301.607:5): apparmor="STATUS" operation="profile_replace" parent=669 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=670 comm="apparmor_parser"
type=1400 audit(1395078301.607:6): apparmor="STATUS" operation="profile_replace" parent=669 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=670 comm="apparmor_parser"
type=1400 audit(1395078301.607:7): apparmor="STATUS" operation="profile_replace" parent=669 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=670 comm="apparmor_parser"
hda-intel 0000:00:14.2: Using LPIB position fix
device-mapper: multipath: version 1.6.0 loaded
hda-intel 0000:00:14.2: Enable sync_write for stable communication
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
SKU: Nid=0x1d sku_cfg=0x4005c603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
init: udev-fallback-graphics main process (1002) terminated with status 1
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda9): using internal journal
EXT3-fs (sda9): mounted filesystem with ordered data mode
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1045) killed by TERM signal
type=1400 audit(1395078304.727:8): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/sbin/dhclient" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:9): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:10): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:11): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:12): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:13): apparmor="STATUS" operation="profile_replace" parent=1103 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1109 comm="apparmor_parser"
type=1400 audit(1395078304.727:14): apparmor="STATUS" operation="profile_load" parent=1103 profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=1112 comm="apparmor_parser"
type=1400 audit(1395078304.727:15): apparmor="STATUS" operation="profile_load" parent=1103 profile="unconfined" name="/usr/sbin/mysqld" pid=1112 comm="apparmor_parser"
type=1400 audit(1395078304.727:16): apparmor="STATUS" operation="profile_load" parent=1103 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1108 comm="apparmor_parser"
type=1400 audit(1395078304.727:17): apparmor="STATUS" operation="profile_load" parent=1103 profile="unconfined" name="chromium_browser" pid=1108 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: lightdm main process (1256) killed by TERM signal
nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hda-codec: out of range cmd 2:5:707:ffffffbf
audit_printk_skb: 27 callbacks suppressed
type=1400 audit(1395078317.615:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1235 comm="cupsd" pid=1235 comm="cupsd" capability=36  capname="block_suspend"
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
type=1400 audit(1395078378.603:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1235 comm="cupsd" pid=1235 comm="cupsd" capability=36  capname="block_suspend"
type=1400 audit(1395078438.613:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1235 comm="cupsd" pid=1235 comm="cupsd" capability=36  capname="block_suspend"
type=1400 audit(1395079866.673:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1235 comm="cupsd" pid=1235 comm="cupsd" capability=36  capname="block_suspend"

Return To nv33120140318_nokwin System Information