dmesg - R600_LLVM

Return To R600_LLVM System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-2-generic (buildd@panlong) (gcc version 4.8.1 (Ubuntu 4.8.1-5ubuntu1) ) #10-Ubuntu SMP Fri Jul 5 18:03:52 UTC 2013 (Ubuntu 3.10.0-2.10-generic 3.10.0)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c84e3fff] usable
BIOS-e820: [mem 0x00000000c84e4000-0x00000000c85e1fff] ACPI NVS
BIOS-e820: [mem 0x00000000c85e2000-0x00000000c8c05fff] usable
BIOS-e820: [mem 0x00000000c8c06000-0x00000000c8d05fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8d06000-0x00000000c8e20fff] usable
BIOS-e820: [mem 0x00000000c8e21000-0x00000000c8ea0fff] reserved
BIOS-e820: [mem 0x00000000c8ea1000-0x00000000cb6b8fff] usable
BIOS-e820: [mem 0x00000000cb6b9000-0x00000000cb6befff] reserved
BIOS-e820: [mem 0x00000000cb6bf000-0x00000000cb716fff] usable
BIOS-e820: [mem 0x00000000cb717000-0x00000000cb7befff] ACPI NVS
BIOS-e820: [mem 0x00000000cb7bf000-0x00000000cb7dffff] usable
BIOS-e820: [mem 0x00000000cb7e0000-0x00000000cb7f1fff] ACPI data
BIOS-e820: [mem 0x00000000cb7f2000-0x00000000cb7f2fff] usable
BIOS-e820: [mem 0x00000000cb7f3000-0x00000000cb7fefff] ACPI data
BIOS-e820: [mem 0x00000000cb7ff000-0x00000000cb7fffff] usable
BIOS-e820: [mem 0x00000000cb800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI:                  /DX79SI, BIOS SIX7910J.86A.0494.2012.0424.1039 04/24/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000CC000000 mask 3FFFFC000000 uncachable
  1 base 0000D0000000 mask 3FFFF0000000 uncachable
  2 base 0000E0000000 mask 3FFFF0000000 uncachable
  3 base 0000F0000000 mask 3FFFF8000000 uncachable
  4 base 0000F8000000 mask 3FFFFC000000 uncachable
  5 base 0000FC000000 mask 3FFFFE000000 uncachable
  6 base 0000FE000000 mask 3FFFFF000000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xcb800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000089000] 89000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fc8000, 0x01fc8fff] PGTABLE
BRK [0x01fc9000, 0x01fc9fff] PGTABLE
BRK [0x01fca000, 0x01fcafff] PGTABLE
init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
 [mem 0x22fe00000-0x22fffffff] page 2M
BRK [0x01fcb000, 0x01fcbfff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
 [mem 0x22c000000-0x22fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
 [mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc84e3fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xc83fffff] page 2M
 [mem 0xc8400000-0xc84e3fff] page 4k
init_memory_mapping: [mem 0xc85e2000-0xc8c05fff]
 [mem 0xc85e2000-0xc85fffff] page 4k
 [mem 0xc8600000-0xc8bfffff] page 2M
 [mem 0xc8c00000-0xc8c05fff] page 4k
BRK [0x01fcc000, 0x01fccfff] PGTABLE
init_memory_mapping: [mem 0xc8d06000-0xc8e20fff]
 [mem 0xc8d06000-0xc8e20fff] page 4k
init_memory_mapping: [mem 0xc8ea1000-0xcb6b8fff]
 [mem 0xc8ea1000-0xc8ffffff] page 4k
 [mem 0xc9000000-0xcb5fffff] page 2M
 [mem 0xcb600000-0xcb6b8fff] page 4k
init_memory_mapping: [mem 0xcb6bf000-0xcb716fff]
 [mem 0xcb6bf000-0xcb716fff] page 4k
init_memory_mapping: [mem 0xcb7bf000-0xcb7dffff]
 [mem 0xcb7bf000-0xcb7dffff] page 4k
init_memory_mapping: [mem 0xcb7f2000-0xcb7f2fff]
 [mem 0xcb7f2000-0xcb7f2fff] page 4k
init_memory_mapping: [mem 0xcb7ff000-0xcb7fffff]
 [mem 0xcb7ff000-0xcb7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35fda000-0x36fe4fff]
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cb7fd120 0005C (v01 INTEL  DX79SI   000001EE      01000013)
ACPI: FACP 00000000cb7fc000 000F4 (v03 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: DSDT 00000000cb7f7000 04F75 (v02 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: FACS 00000000cb721000 00040
ACPI: APIC 00000000cb7f6000 00138 (v02 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: MCFG 00000000cb7f5000 0003C (v01 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: ASF! 00000000cb7f4000 000A5 (v32 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: HPET 00000000cb7f3000 00038 (v01 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: ASPT 00000000cb7f1000 00034 (v07 INTEL  DX79SI   000001EE MSFT 0100000D)
ACPI: SSDT 00000000cb7e1000 0F054 (v01 INTEL  SSDT  PM 000001EE MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
  NODE_DATA [mem 0x22fff7000-0x22fffbfff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0008efff]
  node   0: [mem 0x00100000-0xc84e3fff]
  node   0: [mem 0xc85e2000-0xc8c05fff]
  node   0: [mem 0xc8d06000-0xc8e20fff]
  node   0: [mem 0xc8ea1000-0xcb6b8fff]
  node   0: [mem 0xcb6bf000-0xcb716fff]
  node   0: [mem 0xcb7bf000-0xcb7dffff]
  node   0: [mem 0xcb7f2000-0xcb7f2fff]
  node   0: [mem 0xcb7ff000-0xcb7fffff]
  node   0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2077764
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3982 pages, LIFO batch:0
  DMA32 zone: 12947 pages used for memmap
  DMA32 zone: 828598 pages, LIFO batch:31
  Normal zone: 19456 pages used for memmap
  Normal zone: 1245184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000c84e4000 - 00000000c85e2000
PM: Registered nosave memory: 00000000c8c06000 - 00000000c8d06000
PM: Registered nosave memory: 00000000c8e21000 - 00000000c8ea1000
PM: Registered nosave memory: 00000000cb6b9000 - 00000000cb6bf000
PM: Registered nosave memory: 00000000cb717000 - 00000000cb7bf000
PM: Registered nosave memory: 00000000cb7e0000 - 00000000cb7f2000
PM: Registered nosave memory: 00000000cb7f3000 - 00000000cb7ff000
PM: Registered nosave memory: 00000000cb800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 0000000100000000
e820: [mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86400 r8192 d24192 u131072
pcpu-alloc: s86400 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2045276
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8079096k/9175040k available (7044k kernel code, 863984k absent, 231960k reserved, 6253k data, 1340k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
	Experimental no-CBs for all CPUs
	Experimental no-CBs CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1216 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3300.041 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.08 BogoMIPS (lpj=13200164)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27433 entries in 108 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz (fam: 06, model: 2d, stepping: 06)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
smpboot: Booting Node   0, Processors  #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 520245052 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
Brought up 12 CPUs
smpboot: Total of 12 processors activated (79200.98 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc84e4000-0xc85e1fff] (1040384 bytes)
PM: Registering ACPI NVS region [mem 0xc8c06000-0xc8d05fff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0xcb717000-0xcb7befff] (688128 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xe0526000-0xe0526fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xe0528100-0xe052810f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xe0500000-0xe051ffff]
pci 0000:00:19.0: reg 14: [mem 0xe0525000-0xe0525fff]
pci 0000:00:19.0: reg 18: [io  0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xe0527c00-0xe0527fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xe0520000-0xe0523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xe0527800-0xe0527bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0x4068-0x406f]
pci 0000:00:1f.2: reg 14: [io  0x4074-0x4077]
pci 0000:00:1f.2: reg 18: [io  0x4060-0x4067]
pci 0000:00:1f.2: reg 1c: [io  0x4070-0x4073]
pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xe0527000-0xe05277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xe0528000-0xe05280ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1:   bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:03:00.0: [1002:9498] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xe0300000-0xe030ffff 64bit]
pci 0000:03:00.0: reg 20: [io  0x3000-0x30ff]
pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xe0310000-0xe0313fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:07:00.0: reg 10: [mem 0xe0200000-0xe02007ff 64bit]
pci 0000:07:00.0: reg 18: [io  0x2000-0x20ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: reg 10: [mem 0xe0100000-0xe0101fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3:   bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:09:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [mem 0xe0000000-0xe001ffff]
pci 0000:09:00.0: reg 18: [io  0x1000-0x101f]
pci 0000:09:00.0: reg 1c: [mem 0xe0020000-0xe0023fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 2 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xc84e4000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8c06000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8e21000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb6b9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb717000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7e0000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7f3000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb800000-0xcbffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf0000000-0x107ffffff] could not be reserved
system 00:00: [mem 0xf8000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io  0x0454-0x0457] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [io  0x0400-0x0453] has been reserved
system 00:06: [io  0x0458-0x047f] has been reserved
system 00:06: [io  0x0680-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1:   bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xe0320000-0xe033ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3:   bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xe0300000-0xe03fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xe0200000-0xe02fffff]
pci_bus 0000:08: resource 1 [mem 0xe0100000-0xe01fffff]
pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:09: resource 1 [mem 0xe0000000-0xe00fffff]
pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16428k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc44e4000-0xc84e4000] (64MB) mapped at [ffff8800c44e4000-ffff8800c84e3fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1373482721.564:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15811
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
pcieport 0000:00:01.1: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:11.0: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 72 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:11.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0527c00
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-2-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0527800
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-2-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-2-generic xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-2-generic xhci_hcd
usb usb4: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 88 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-2-generic xhci_hcd
usb usb5: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-2-generic xhci_hcd
usb usb6: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 238e8976ebaee4c78e1f970bca24255fc770c7c4'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-07-10 18:58:41 UTC (1373482721)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1340k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1136k freed
Freeing unused kernel memory: 1004k freed
systemd-udevd[181]: starting version 204
pps_core: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 89 for MSI/MSI-X
firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:44
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:09:00.0: Disabling ASPM L0s L1
ahci 0000:00:1f.2: version 3.0
e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:09:00.0: irq 90 for MSI/MSI-X
e1000e 0000:09:00.0: irq 91 for MSI/MSI-X
e1000e 0000:09:00.0: irq 92 for MSI/MSI-X
ahci 0000:00:1f.2: irq 93 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xe0527000 port 0xe0527180 irq 93
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xe0527000 port 0xe0527280 irq 93
ata5: DUMMY
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:09:00.0 eth1: registered PHC clock
e1000e 0000:09:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:45
e1000e 0000:09:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
firewire_core 0000:07:00.0: created device fw0: GUID e0cb4e000004db61, S400
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: OCZ-VERTEX, 1.30, max UDMA/133
ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.30 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
ata4.00: ATAPI: ATAPI   iHAS124   Y, BL0W, max UDMA/100
sd 1:0:0:0: [sda] Attached SCSI disk
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   Y      BL0W PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c223
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: G15 Keyboard Hub
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.2.1: new low-speed USB device number 4 using ehci-pci
usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=c226
usb 1-1.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2.1: Product: G15 Gaming Keyboard
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2
hid-generic 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input3
hid-generic 0003:046D:C226.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1/input1
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2.4: new full-speed USB device number 5 using ehci-pci
init: upstart-dbus-bridge main process (262) terminated with status 1
init: upstart-dbus-bridge main process ended, respawning
usb 1-1.2.4: New USB device found, idVendor=046d, idProduct=c227
usb 1-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2.4: Product: G15 GamePanel LCD
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input4
hid-generic 0003:046D:C227.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.0-1.2.4/input0
usb 1-1.1: new full-speed USB device number 6 using ehci-pci
Adding 8309756k swap on /dev/sda5.  Priority:-1 extents:1 across:8309756k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usb 1-1.1: New USB device found, idVendor=1532, idProduct=0101
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Razer Copperhead Laser Mouse
usb 1-1.1: Manufacturer: Razer
systemd-udevd[386]: starting version 204
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.1/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input6
hid-generic 0003:1532:0101.0005: input,hidraw4: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.1/input1
lp: driver loaded but no devices found
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 94 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 95 for MSI/MSI-X
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x174B:0xE880).
[drm] register mmio base: 0xE0300000
[drm] register mmio size: 65536
ATOM BIOS: RV730PRO
radeon 0000:03:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:03:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 4049516 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
SKU: Nid=0x1d sku_cfg=0x4006f601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000006
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4006f601 for NID 0x1d
realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
microcode: CPU0 sig=0x206d6, pf=0x4, revision=0x616
type=1400 audit(1373482723.194:2): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
type=1400 audit(1373482723.194:3): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
type=1400 audit(1373482723.194:4): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
type=1400 audit(1373482723.194:5): apparmor="STATUS" operation="profile_replace" parent=447 profile="unconfined" name="/sbin/dhclient" pid=453 comm="apparmor_parser"
type=1400 audit(1373482723.194:6): apparmor="STATUS" operation="profile_replace" parent=447 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser"
type=1400 audit(1373482723.194:7): apparmor="STATUS" operation="profile_replace" parent=447 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser"
type=1400 audit(1373482723.194:8): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
type=1400 audit(1373482723.194:9): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
type=1400 audit(1373482723.194:10): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
radeon 0000:03:00.0: ffff880223cef800 unpin not necessary
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
microcode: CPU1 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU2 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU3 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU4 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU5 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU6 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU7 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU8 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU9 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU10 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU11 sig=0x206d6, pf=0x4, revision=0x616
microcode: Microcode Update Driver: v2.00 , Peter Oruba
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90005690598
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading RV730 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880221f24c00
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880221f24c0c
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000000015e598 and cpu addr 0xffffc9000641c598
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: irq 96 for MSI/MSI-X
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I-1
[drm]   HPD2
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DIN-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-2
[drm]   HPD1
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP1: INTERNAL_UNIPHY
[drm] radeon: power management initialized
[drm] fb mappable at 0xD035F000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Console: switching to colour frame buffer device 240x67
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:03:00.0: registered panic notifier
[drm] Initialized radeon 2.33.0 20080528 for 0000:03:00.0 on minor 0
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:03:00.1: Using LPIB position fix
snd_hda_intel 0000:03:00.1: irq 97 for MSI/MSI-X
hda-intel 0000:03:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input14
init: failsafe main process (749) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (833) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
e1000e 0000:00:19.0: irq 89 for MSI/MSI-X
e1000e 0000:00:19.0: irq 89 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To R600_LLVM System Information