dmesg - JHMultidisk-ZFS-Raid10
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.2.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Feb 20 12:17:37 EST 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf05b000 (usable)
BIOS-e820: 00000000bf05b000 - 00000000bf11f000 (reserved)
BIOS-e820: 00000000bf11f000 - 00000000bf224000 (usable)
BIOS-e820: 00000000bf224000 - 00000000bf2d4000 (reserved)
BIOS-e820: 00000000bf2d4000 - 00000000bf67f000 (usable)
BIOS-e820: 00000000bf67f000 - 00000000bf77f000 (reserved)
BIOS-e820: 00000000bf77f000 - 00000000bf7cf000 (ACPI NVS)
BIOS-e820: 00000000bf7cf000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xFDF40
DMI: IBM IBM System X3250 M4 -[2583KEG]-/00D3729, BIOS -[JQE152FUS-1.03]- 12/11/2012
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0C0000000 mask FC0000000 uncachable
2 base 0BF800000 mask FFF800000 uncachable
3 base 0FFF00000 mask FFFF00000 write-protect
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask E00000000 write-back
6 base 400000000 mask C00000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000440000000
0100000000 - 0440000000 page 2M
kernel direct mapping tables up to 440000000 @ a000-1c000
RAMDISK: 36f73000 - 37fef6d7
ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
ACPI: XSDT 00000000bf7fe1c0 00074 (v01 IBM BROMOLOW 00000000 01000013)
ACPI: FACP 00000000bf7f9000 000F4 (v04 IBM BROMOLOW 00000000 IBM 01000013)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 00000000bf7f2000 0216F (v01 IBM BROMOLOW 00000003 IBM 01000013)
ACPI: FACS 00000000bf7b7000 00040
ACPI: TCPA 00000000bf7fd000 00064 (v00 00000000 00000000)
ACPI: DMAR 00000000bf7fc000 00078 (v01 IBM BROMOLOW 00000001 IBM 00000001)
ACPI: ERST 00000000bf7fa000 00230 (v01 IBM BROMOLOW 00000001 IBM 01000013)
ACPI: HPET 00000000bf7f8000 00038 (v01 IBM BROMOLOW 00000001 IBM 01000013)
ACPI: APIC 00000000bf7f7000 00092 (v02 IBM BROMOLOW 00000000 IBM 01000013)
ACPI: MCFG 00000000bf7f6000 0003C (v01 IBM BROMOLOW 00000001 IBM 01000013)
ACPI: SLIC 00000000bf7f5000 00176 (v01 IBM BROMOLOW 00000000 IBM 01000013)
ACPI: SSDT 00000000bf7f1000 000A3 (v02 IBM CPUSCOPE 00004000 IBM 01000013)
ACPI: SSDT 00000000bf7f0000 00D44 (v02 IBM PSTATEPM 00004000 IBM 01000013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
NODE_DATA [0000000000017000 - 000000000004afff]
bootmap [0000000000100000 - 0000000000187fff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 0440000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4]
#3 [0036f73000 - 0037fef6d7] RAMDISK ==> [0036f73000 - 0037fef6d7]
#4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
#5 [000201c000 - 000201c4cc] BRK ==> [000201c000 - 000201c4cc]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000017000] PGTABLE ==> [000000a000 - 0000017000]
found SMP MP-table at [ffff88000009d140] 9d140
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 17408MB)
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x000bf05b
0: 0x000bf11f -> 0x000bf224
0: 0x000bf2d4 -> 0x000bf67f
0: 0x000bf7ff -> 0x000bf800
0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4191400
DMA zone: 56 pages used for memmap
DMA zone: 117 pages reserved
DMA zone: 3823 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765252 pages, LIFO batch:31
Normal zone: 46592 pages used for memmap
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 15, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf05b000 - 00000000bf11f000
PM: Registered nosave memory: 00000000bf224000 - 00000000bf2d4000
PM: Registered nosave memory: 00000000bf67f000 - 00000000bf77f000
PM: Registered nosave memory: 00000000bf77f000 - 00000000bf7cf000
PM: Registered nosave memory: 00000000bf7cf000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144
pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4130355
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16302112k/17825792k available (5221k kernel code, 1060192k absent, 463488k reserved, 7121k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3292.663 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.32 BogoMIPS (lpj=3292663)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21430 entries in 85 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
dmar: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
dmar: No ATSR found
IOAPIC id 15 under DRHD base 0xfed90000
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz stepping 09
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (52682.60 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf77f000 (327680 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xc1c01000-0xc1c013ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xc1c02000-0xc1c023ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x4078-0x407f]
pci 0000:00:1f.2: reg 14: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 18: [io 0x4070-0x4077]
pci 0000:00:1f.2: reg 1c: [io 0x408c-0x408f]
pci 0000:00:1f.2: reg 20: [io 0x4050-0x405f]
pci 0000:00:1f.2: reg 24: [io 0x4040-0x404f]
pci 0000:00:1f.3: reg 10: [mem 0x4088c1c00000-0x4088c1c000ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: reg 10: [io 0x4068-0x406f]
pci 0000:00:1f.5: reg 14: [io 0x4084-0x4087]
pci 0000:00:1f.5: reg 18: [io 0x4060-0x4067]
pci 0000:00:1f.5: reg 1c: [io 0x4080-0x4083]
pci 0000:00:1f.5: reg 20: [io 0x4030-0x403f]
pci 0000:00:1f.5: reg 24: [io 0x4020-0x402f]
pci 0000:1a:00.0: reg 10: [io 0x3200-0x32ff]
pci 0000:1a:00.0: reg 14: [mem 0xc1b00000-0xc1b03fff 64bit]
pci 0000:1a:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:1a:00.1: reg 10: [io 0x3000-0x30ff]
pci 0000:1a:00.1: reg 14: [mem 0xc1b04000-0xc1b07fff 64bit]
pci 0000:1a:00.1: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 1a-1e]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc1b00000-0xc1bfffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:01.1: PCI bridge to [bus 1f-23]
pci 0000:00:01.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:01:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:02:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xc0000000-0xc0ffffff pref]
pci 0000:04:00.0: reg 14: [mem 0xc1800000-0xc1803fff]
pci 0000:04:00.0: reg 18: [mem 0xc1000000-0xc17fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:03:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 05-05]
pci 0000:02:01.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:02:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:02:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xc1a80000-0xc1a9ffff]
pci 0000:06:00.0: reg 14: [mem 0xc1a00000-0xc1a7ffff]
pci 0000:06:00.0: reg 18: [io 0x2000-0x201f]
pci 0000:06:00.0: reg 1c: [mem 0xc1aa0000-0xc1aa3fff]
pci 0000:06:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 06-0a]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0b:00.0: reg 10: [mem 0xc1980000-0xc199ffff]
pci 0000:0b:00.0: reg 14: [mem 0xc1900000-0xc197ffff]
pci 0000:0b:00.0: reg 18: [io 0x1000-0x101f]
pci 0000:0b:00.0: reg 1c: [mem 0xc19a0000-0xc19a3fff]
pci 0000:0b:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 0b-0f]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 10-14]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 15-19]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 24-28] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.3: no compatible bridge window for [mem 0x4088c1c00000-0x4088c1c000ff 64bit]
pci 0000:00:1f.3: can't reserve [mem 0x4088c1c00000-0x4088c1c000ff 64bit]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
hpet: hpet6 irq 29 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0080-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0077]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0062-0x0066]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0500-0x053f]
pnp 00:06: [io 0x0440-0x045f]
pnp 00:06: [io 0x0460-0x047f]
pnp 00:06: [io 0x0580-0x05ff]
pnp 00:06: [io 0x05e0-0x05ff]
pnp 00:06: [io 0x0cf9]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x02f8-0x02ff]
pnp 00:08: [irq 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [mem 0xfed40000-0xfed44fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp 00:0a: [mem 0xfed14000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0xf8000000-0xfbffffff]
pnp 00:0a: [mem 0xff800000-0xffffffff]
pnp 00:0a: [mem 0xfeb00000-0xfebfffff]
pnp 00:0a: [mem 0xfe710000-0xfe711fff]
pnp 00:0a: [mem 0xfe800000-0xfe9fffff]
pnp 00:0a: [mem 0xfc000000-0xfcffffff]
pnp 00:0a: [mem 0xfea00000-0xfeafffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0c84-0x0c89]
pnp 00:0b: [io 0x0c8a-0x0c8b]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0c80]
pnp 00:0c: [io 0x0c81]
pnp 00:0c: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0500-0x053f] has been reserved
system 00:06: [io 0x0440-0x045f] has been reserved
system 00:06: [io 0x0460-0x047f] has been reserved
system 00:06: [io 0x0580-0x05ff] has been reserved
system 00:06: [io 0x05e0-0x05ff] has been reserved
system 00:06: [io 0x0cf9] could not be reserved
system 00:0a: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xff800000-0xffffffff] has been reserved
system 00:0a: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:0a: [mem 0xfe710000-0xfe711fff] has been reserved
system 00:0a: [mem 0xfe800000-0xfe9fffff] has been reserved
system 00:0a: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:0a: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:0b: [io 0x0c84-0x0c89] has been reserved
system 00:0b: [io 0x0c8a-0x0c8b] has been reserved
system 00:0c: [io 0x0c80] has been reserved
system 00:0c: [io 0x0c81] has been reserved
pci 0000:1a:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:1a:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:06:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:0b:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:01.0: BAR 15: assigned [mem 0xc1d00000-0xc1dfffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc1e00000-0xc1efffff pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc1f00000-0xc1ffffff pref]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc1c00000-0xc1c000ff 64bit]
pci 0000:00:1f.3: BAR 0: set to [mem 0xc1c00000-0xc1c000ff 64bit] (PCI address [0xc1c00000-0xc1c000ff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:1a:00.0: BAR 6: assigned [mem 0xc1d00000-0xc1d3ffff pref]
pci 0000:1a:00.1: BAR 6: assigned [mem 0xc1d40000-0xc1d7ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 1a-1e]
pci 0000:00:01.0: PCI bridge to [bus 1a-1e]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc1b00000-0xc1bfffff]
pci 0000:00:01.0: bridge window [mem 0xc1d00000-0xc1dfffff pref]
pci 0000:00:01.1: PCI bridge to [bus 1f-23]
pci 0000:00:01.1: PCI bridge to [bus 1f-23]
pci 0000:00:01.1: bridge window [io disabled]
pci 0000:00:01.1: bridge window [mem disabled]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: bridge window [io disabled]
pci 0000:03:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 05-05]
pci 0000:02:01.0: PCI bridge to [bus 05-05]
pci 0000:02:01.0: bridge window [io disabled]
pci 0000:02:01.0: bridge window [mem disabled]
pci 0000:02:01.0: bridge window [mem pref disabled]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0: bridge window [io disabled]
pci 0000:01:00.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc18fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xc1e00000-0xc1e3ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 06-0a]
pci 0000:00:1c.1: PCI bridge to [bus 06-0a]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
pci 0000:00:1c.1: bridge window [mem 0xc1e00000-0xc1efffff pref]
pci 0000:0b:00.0: BAR 6: assigned [mem 0xc1f00000-0xc1f3ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 0b-0f]
pci 0000:00:1c.2: PCI bridge to [bus 0b-0f]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
pci 0000:00:1c.2: bridge window [mem 0xc1f00000-0xc20fffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 10-14]
pci 0000:00:1c.3: PCI bridge to [bus 10-14]
pci 0000:00:1c.3: bridge window [io disabled]
pci 0000:00:1c.3: bridge window [mem disabled]
pci 0000:00:1c.3: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 15-19]
pci 0000:00:1c.4: PCI bridge to [bus 15-19]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem disabled]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 24-28]
pci 0000:00:1e.0: PCI bridge to [bus 24-28]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:02:01.0: setting latency timer to 64
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:1a: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:1a: resource 1 [mem 0xc1b00000-0xc1bfffff]
pci_bus 0000:1a: resource 2 [mem 0xc1d00000-0xc1dfffff pref]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc18fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc18fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc18fffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc1000000-0xc18fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xc1a00000-0xc1afffff]
pci_bus 0000:06: resource 2 [mem 0xc1e00000-0xc1efffff pref]
pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:0b: resource 1 [mem 0xc1900000-0xc19fffff]
pci_bus 0000:0b: resource 2 [mem 0xc1f00000-0xc20fffff pref]
pci_bus 0000:24: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:24: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:24: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:24: resource 7 [mem 0xc0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16881k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1366794213.328:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31873
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 91C009E24102C06A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.1: irq 31 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xc80, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x004f4d, prod_id: 0x012e, dev_id: 0x20)
IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 70)
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc1c01000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc1c02000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Can't read CTR while initializing i8042.
Refined TSC clocksource calibration: 3292.520 MHz.
Switching to clocksource tsc
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2013-04-24 09:03:35 UTC (1366794215)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: [email protected]
udev: starting version 147
device-mapper: multipath: version 1.5.0 loaded
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
qla2xxx [0000:00:00.0]-0005: QLogic Fibre Channel HBA Driver: 8.05.00.03.06.0-k.
qla2xxx 0000:1a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
qla2xxx [0000:1a:00.0]-001d: Found an ISP2532 irq 16 iobase 0xffffc90001854000.
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:1a:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:1a:00.0: irq 33 for MSI/MSI-X
qla2xxx 0000:1a:00.0: setting latency timer to 64
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.2: new low speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=04b3, idProduct=3025
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB NetVista Full Width Keyboard.
usb 1-1.2: Manufacturer: LITE-ON Technology
usb 1-1.2: configuration #1 chosen from 1 choice
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1a.0-1.2/input0
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
usb 2-1.1: configuration #1 chosen from 1 choice
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.5: new low speed USB device number 4 using ehci_hcd
usb 2-1.5: New USB device found, idVendor=04b3, idProduct=310b
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.5: configuration #1 chosen from 1 choice
input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
generic-usb 0003:04B3:310B.0002: input,hidraw1: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-1.5/input0
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 2-1.1.5: configuration #1 chosen from 2 choices
usb 2-1.1.5: USB disconnect, device number 5
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 2-1.1.5: configuration #1 chosen from 2 choices
qla2xxx 0000:1a:00.0: firmware: requesting ql2500_fw.bin
scsi0 : qla2xxx
qla2xxx [0000:1a:00.0]-00fb:0: QLogic QLE2562 - QLogic 8Gb FC Dual-port HBA for System x.
qla2xxx [0000:1a:00.0]-00fc:0: ISP2532: PCIe (5.0GT/s x4) @ 0000:1a:00.0 hdma+ host#=0 fw=5.08.00 (90d5).
qla2xxx 0000:1a:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
qla2xxx [0000:1a:00.1]-001d: Found an ISP2532 irq 17 iobase 0xffffc90001878000.
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:1a:00.1: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
qla2xxx 0000:1a:00.1: irq 35 for MSI/MSI-X
qla2xxx 0000:1a:00.1: setting latency timer to 64
qla2xxx [0000:1a:00.0]-505f:0: Link is operational (2 Gbps).
qla2xxx [0000:1a:00.0]-1020:0: **** Failed mbx[0]=4006, mb[1]=7fe, mb[2]=1, mb[3]=1, cmd=6a ****.
scsi 0:0:0:0: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:1: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:2: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:3: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:4: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:5: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:6: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:7: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:8: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 0:0:0:9: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi1 : qla2xxx
qla2xxx [0000:1a:00.1]-00fb:1: QLogic QLE2562 - QLogic 8Gb FC Dual-port HBA for System x.
qla2xxx [0000:1a:00.1]-00fc:1: ISP2532: PCIe (5.0GT/s x4) @ 0000:1a:00.1 hdma+ host#=1 fw=5.08.00 (90d5).
qla2xxx [0000:1a:00.1]-505f:1: Link is operational (2 Gbps).
qla2xxx [0000:1a:00.1]-1020:1: **** Failed mbx[0]=4006, mb[1]=7fe, mb[2]=1, mb[3]=1, cmd=6a ****.
scsi 1:0:0:0: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:1: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:2: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:3: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:4: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:5: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:6: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:7: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:8: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
scsi 1:0:0:9: Direct-Access DGC DISK 0226 PQ: 0 ANSI: 4
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0x4078 ctl 0x4090 bmdma 0x4050 irq 17
ata2: SATA max UDMA/133 cmd 0x4070 ctl 0x408c bmdma 0x4058 irq 17
ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0x4068 ctl 0x4084 bmdma 0x4030 irq 17
ata4: SATA max UDMA/133 cmd 0x4060 ctl 0x4080 bmdma 0x4038 irq 17
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: IBM SATA DEVICE 81Y3657, IB02, max UDMA/33
ata3.00: configured for UDMA/33
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 4 SControl 0)
ata1.01: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: ST500NM0011 39M4517 42C0468IBM, BB45, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST500NM0011 BB45 PQ: 0 ANSI: 5
ata2.00: ATA-8: WD5003ABYX-23 39M4517 42C0468IBM, WC34, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WD5003ABYX-23 n/a PQ: 0 ANSI: 5
scsi 4:0:0:0: CD-ROM IBM SATA DEVICE 81Y3657 IB02 PQ: 0 ANSI: 5
ACPI: WMI: Mapper loaded
sd 0:0:0:1: [sdb] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 2:0:0:0: [sdu] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 2:0:0:0: [sdu] Write Protect is off
sd 2:0:0:0: [sdu] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdv] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:2: [sdc] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 3:0:0:0: [sdv] Write Protect is off
sd 3:0:0:0: [sdv] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:3: [sdd] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sdu:
sd 0:0:0:4: [sde] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 0:0:0:1: [sdb] Write Protect is off
sd 0:0:0:1: [sdb] Mode Sense: 87 00 00 08
sd 1:0:0:1: [sdl] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 0:0:0:5: [sdf] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 87 00 00 08
sd 0:0:0:2: [sdc] Write Protect is off
sd 0:0:0:2: [sdc] Mode Sense: 87 00 00 08
sd 0:0:0:7: [sdh] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 0:0:0:8: [sdi] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 0:0:0:9: [sdj] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sdv:
sd 0:0:0:3: [sdd] Write Protect is off
sd 0:0:0:3: [sdd] Mode Sense: 87 00 00 08
sd 0:0:0:6: [sdg] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 0:0:0:4: [sde] Write Protect is off
sd 0:0:0:4: [sde] Mode Sense: 87 00 00 08
sd 1:0:0:0: [sdk] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 1:0:0:3: [sdn] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 1:0:0:2: [sdm] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 1:0:0:4: [sdo] 267249280 512-byte logical blocks: (136 GB/127 GiB)
sd 1:0:0:1: [sdl] Write Protect is off
sd 1:0:0:1: [sdl] Mode Sense: 87 00 00 08
sd 0:0:0:5: [sdf] Write Protect is off
sd 0:0:0:5: [sdf] Mode Sense: 87 00 00 08
sd 0:0:0:7: [sdh] Write Protect is off
sd 0:0:0:7: [sdh] Mode Sense: 87 00 00 08
sd 0:0:0:8: [sdi] Write Protect is off
sd 0:0:0:8: [sdi] Mode Sense: 87 00 00 08
sd 0:0:0:9: [sdj] Write Protect is off
sd 0:0:0:9: [sdj] Mode Sense: 87 00 00 08
sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:6: [sdg] Write Protect is off
sd 0:0:0:6: [sdg] Mode Sense: 87 00 00 08
sd 1:0:0:8: [sds] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 1:0:0:7: [sdr] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 1:0:0:9: [sdt] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 1:0:0:3: [sdn] Write Protect is off
sd 1:0:0:3: [sdn] Mode Sense: 87 00 00 08
sd 1:0:0:0: [sdk] Write Protect is off
sd 1:0:0:5: [sdp] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 1:0:0:0: [sdk] Mode Sense: 87 00 00 08
sd 1:0:0:4: [sdo] Write Protect is off
sd 1:0:0:4: [sdo] Mode Sense: 87 00 00 08
sd 1:0:0:2: [sdm] Write Protect is off
sd 1:0:0:2: [sdm] Mode Sense: 87 00 00 08
sd 1:0:0:6: [sdq] 280278656 512-byte logical blocks: (143 GB/133 GiB)
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:2: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:3: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:4: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:8: [sds] Write Protect is off
sd 1:0:0:8: [sds] Mode Sense: 87 00 00 08
sd 1:0:0:7: [sdr] Write Protect is off
sd 1:0:0:7: [sdr] Mode Sense: 87 00 00 08
sd 1:0:0:9: [sdt] Write Protect is off
sd 1:0:0:9: [sdt] Mode Sense: 87 00 00 08
sd 1:0:0:5: [sdp] Write Protect is off
sd 1:0:0:5: [sdp] Mode Sense: 87 00 00 08
sd 0:0:0:5: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:8: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:7: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:6: [sdq] Write Protect is off
sd 1:0:0:6: [sdq] Mode Sense: 87 00 00 08
sd 0:0:0:9: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:4: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:6: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:2: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:8: [sds] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:9: [sdt] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:3: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:5: [sdp] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:7: [sdr] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:6: [sdq] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:1: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdi:
sdf:
sdh:
sda:
sds:
sdp:
sdn:
sdt:
sdm:
sdo:
sdb:
sdc:
sdr:
sdq:
sdl:
sdk:
sdj:
sdg:
sdd:
sde: unknown partition table
unknown partition table
sdu1 sdu2
unknown partition table
unknown partition table
unknown partition table
sd 2:0:0:0: [sdu] Attached SCSI disk
sd 0:0:0:5: [sdf] Attached SCSI disk
sd 0:0:0:7: [sdh] Attached SCSI disk
sd 1:0:0:6: [sdq] Attached SCSI disk
sd 1:0:0:4: [sdo] Attached SCSI disk
unknown partition table
sd 0:0:0:1: [sdb] Attached SCSI disk
unknown partition table
unknown partition table
unknown partition table
unknown partition table
unknown partition table
sd 1:0:0:8: [sds] Attached SCSI disk
unknown partition table
sd 0:0:0:8: [sdi] Attached SCSI disk
sd 1:0:0:2: [sdm] Attached SCSI disk
sd 1:0:0:0: [sdk] Attached SCSI disk
sd 0:0:0:3: [sdd] Attached SCSI disk
sd 0:0:0:9: [sdj] Attached SCSI disk
unknown partition table
sd 1:0:0:5: [sdp] Attached SCSI disk
unknown partition table
unknown partition table
unknown partition table
unknown partition table
unknown partition table
sd 1:0:0:7: [sdr] Attached SCSI disk
unknown partition table
unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:6: [sdg] Attached SCSI disk
sd 0:0:0:4: [sde] Attached SCSI disk
sd 0:0:0:2: [sdc] Attached SCSI disk
sd 1:0:0:9: [sdt] Attached SCSI disk
sd 1:0:0:1: [sdl] Attached SCSI disk
sd 1:0:0:3: [sdn] Attached SCSI disk
sdv1 sdv2
sd 3:0:0:0: [sdv] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
emc: device handler registered
device-mapper: multipath round-robin: version 1.0.0 loaded
sd 1:0:0:2: emc: detected Clariion CX300, flags 0
sd 1:0:0:2: emc: ALUA failover mode detected
sd 1:0:0:2: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:2: emc: detected Clariion CX300, flags 0
sd 0:0:0:2: emc: ALUA failover mode detected
sd 0:0:0:2: emc: connected to SP A Port 0 (bound, default SP B)
sd 1:0:0:2: emc: ALUA failover mode detected
sd 1:0:0:2: emc: at SP B Port 0 (owned, default SP B)
sd 1:0:0:0: emc: detected Clariion CX300, flags 0
sd 1:0:0:0: emc: ALUA failover mode detected
sd 1:0:0:0: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:0: emc: detected Clariion CX300, flags 0
sd 0:0:0:0: emc: ALUA failover mode detected
sd 0:0:0:0: emc: connected to SP A Port 0 (bound, default SP B)
sd 1:0:0:0: emc: ALUA failover mode detected
sd 1:0:0:0: emc: at SP B Port 0 (owned, default SP B)
sd 1:0:0:4: emc: detected Clariion CX300, flags 0
sd 1:0:0:4: emc: ALUA failover mode detected
sd 1:0:0:4: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:4: emc: detected Clariion CX300, flags 0
sd 0:0:0:4: emc: ALUA failover mode detected
sd 0:0:0:4: emc: connected to SP A Port 0 (bound, default SP B)
sd 1:0:0:4: emc: ALUA failover mode detected
sd 1:0:0:4: emc: at SP B Port 0 (owned, default SP B)
sd 1:0:0:6: emc: detected Clariion CX300, flags 0
sd 1:0:0:6: emc: ALUA failover mode detected
sd 1:0:0:6: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:6: emc: detected Clariion CX300, flags 0
sd 0:0:0:6: emc: ALUA failover mode detected
sd 0:0:0:6: emc: connected to SP A Port 0 (bound, default SP B)
sd 1:0:0:6: emc: ALUA failover mode detected
sd 1:0:0:6: emc: at SP B Port 0 (owned, default SP B)
sd 1:0:0:8: emc: detected Clariion CX300, flags 0
sd 1:0:0:8: emc: ALUA failover mode detected
sd 1:0:0:8: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:8: emc: detected Clariion CX300, flags 0
sd 0:0:0:8: emc: ALUA failover mode detected
sd 0:0:0:8: emc: connected to SP A Port 0 (bound, default SP B)
sd 0:0:0:5: emc: detected Clariion CX300, flags 0
sd 0:0:0:5: emc: ALUA failover mode detected
sd 0:0:0:5: emc: connected to SP A Port 0 (owned, default SP A)
sd 1:0:0:5: emc: detected Clariion CX300, flags 0
sd 1:0:0:5: emc: ALUA failover mode detected
sd 1:0:0:5: emc: connected to SP B Port 0 (bound, default SP A)
sd 1:0:0:8: emc: ALUA failover mode detected
sd 1:0:0:8: emc: at SP B Port 0 (owned, default SP B)
sd 0:0:0:5: emc: ALUA failover mode detected
sd 0:0:0:5: emc: at SP A Port 0 (owned, default SP A)
sd 0:0:0:3: emc: detected Clariion CX300, flags 0
sd 0:0:0:3: emc: ALUA failover mode detected
sd 0:0:0:3: emc: connected to SP A Port 0 (owned, default SP A)
sd 1:0:0:3: emc: detected Clariion CX300, flags 0
sd 1:0:0:3: emc: ALUA failover mode detected
sd 1:0:0:3: emc: connected to SP B Port 0 (bound, default SP A)
sd 0:0:0:1: emc: detected Clariion CX300, flags 0
sd 0:0:0:3: emc: ALUA failover mode detected
sd 0:0:0:3: emc: at SP A Port 0 (owned, default SP A)
sd 0:0:0:1: emc: ALUA failover mode detected
sd 0:0:0:1: emc: connected to SP A Port 0 (owned, default SP A)
sd 1:0:0:1: emc: detected Clariion CX300, flags 0
sd 1:0:0:1: emc: ALUA failover mode detected
sd 1:0:0:1: emc: connected to SP B Port 0 (bound, default SP A)
sd 0:0:0:1: emc: ALUA failover mode detected
sd 0:0:0:1: emc: at SP A Port 0 (owned, default SP A)
sd 0:0:0:9: emc: detected Clariion CX300, flags 0
sd 0:0:0:9: emc: ALUA failover mode detected
sd 0:0:0:9: emc: connected to SP A Port 0 (owned, default SP A)
sd 1:0:0:9: emc: detected Clariion CX300, flags 0
sd 1:0:0:9: emc: ALUA failover mode detected
sd 1:0:0:9: emc: connected to SP B Port 0 (bound, default SP A)
sd 0:0:0:9: emc: ALUA failover mode detected
sd 0:0:0:9: emc: at SP A Port 0 (owned, default SP A)
sd 0:0:0:7: emc: detected Clariion CX300, flags 0
sd 0:0:0:7: emc: ALUA failover mode detected
sd 0:0:0:7: emc: connected to SP A Port 0 (owned, default SP A)
sd 1:0:0:7: emc: detected Clariion CX300, flags 0
sd 1:0:0:7: emc: ALUA failover mode detected
sd 1:0:0:7: emc: connected to SP B Port 0 (bound, default SP A)
sd 0:0:0:7: emc: ALUA failover mode detected
sd 0:0:0:7: emc: at SP A Port 0 (owned, default SP A)
md: bind
md: bind
md: raid1 personality registered for level 1
bio: create slab at 1
md/raid1:md1: active with 2 out of 2 mirrors
created bitmap (4 pages) for device md1
md1: bitmap initialized from disk: read 1 pages, set 0 of 7443 bits
md1: detected capacity change from 0 to 499448086528
md1: unknown partition table
dracut: Scanning devices md1 for LVM logical volumes vg_emcgrid/swap vg_emcgrid/root
dracut: /dev/sda: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 4096: Input/output error
dracut: inactive '/dev/vg_emcgrid/home' [431.85 GiB] inherit
dracut: inactive '/dev/vg_emcgrid/root' [29.30 GiB] inherit
dracut: inactive '/dev/vg_emcgrid/swap' [4.00 GiB] inherit
dracut: /dev/sda: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sda: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdr: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdc: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdt: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sde: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdg: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdi: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdl: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 136831565824: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 136831623168: Input/output error
dracut: /dev/sdn: read failed after 0 of 4096 at 4096: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 0: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 143502606336: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 143502663680: Input/output error
dracut: /dev/sdp: read failed after 0 of 4096 at 4096: Input/output error
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_emcgrid-root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1366794224.830:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
md: bind
md: bind
md: bind
md: bind
md: bind
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 0:0:0:2: Attached scsi generic sg2 type 0
sd 0:0:0:3: Attached scsi generic sg3 type 0
sd 0:0:0:4: Attached scsi generic sg4 type 0
sd 0:0:0:5: Attached scsi generic sg5 type 0
sd 0:0:0:6: Attached scsi generic sg6 type 0
sd 0:0:0:7: Attached scsi generic sg7 type 0
sd 0:0:0:8: Attached scsi generic sg8 type 0
sd 0:0:0:9: Attached scsi generic sg9 type 0
sd 1:0:0:0: Attached scsi generic sg10 type 0
sd 1:0:0:1: Attached scsi generic sg11 type 0
sd 1:0:0:2: Attached scsi generic sg12 type 0
sd 1:0:0:3: Attached scsi generic sg13 type 0
sd 1:0:0:4: Attached scsi generic sg14 type 0
sd 1:0:0:5: Attached scsi generic sg15 type 0
sd 1:0:0:6: Attached scsi generic sg16 type 0
sd 1:0:0:7: Attached scsi generic sg17 type 0
sd 1:0:0:8: Attached scsi generic sg18 type 0
sd 1:0:0:9: Attached scsi generic sg19 type 0
sd 2:0:0:0: Attached scsi generic sg20 type 0
sd 3:0:0:0: Attached scsi generic sg21 type 0
sr 4:0:0:0: Attached scsi generic sg22 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 14488.000 MB/sec
xor: using function: generic_sse (14488.000 MB/sec)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
i801_smbus 0000:00:1f.3: PCI INT C: no GSI - using IRQ 11
raid6: int64x1 3910 MB/s
raid6: int64x2 4109 MB/s
raid6: int64x4 3453 MB/s
raid6: int64x8 2781 MB/s
raid6: sse2x1 8929 MB/s
raid6: sse2x2 10882 MB/s
raid6: sse2x4 13015 MB/s
raid6: using algorithm sse2x4 (13015 MB/s)
raid6: using ssse3x2 recovery algorithm
usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 36:40:b5:89:e2:0e
usbcore: registered new interface driver cdc_ether
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md/raid:md127: device dm-5 operational as raid disk 0
md/raid:md127: device dm-4 operational as raid disk 3
md/raid:md127: device dm-2 operational as raid disk 4
md/raid:md127: device dm-3 operational as raid disk 2
md/raid:md127: device dm-8 operational as raid disk 1
md/raid:md127: allocated 5366kB
md/raid:md127: raid level 5 active with 5 out of 5 devices, algorithm 2
RAID conf printout:
--- level:5 rd:5 wd:5
disk 0, o:1, dev:dm-5
disk 1, o:1, dev:dm-8
disk 2, o:1, dev:dm-3
disk 3, o:1, dev:dm-4
disk 4, o:1, dev:dm-2
md127: detected capacity change from 0 to 547056779264
md127: unknown partition table
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x15
platform microcode: firmware: requesting intel-ucode/06-3a-09
Microcode Update Driver: v2.00 , Peter Oruba
md: bind
SPL: Loaded module v0.6.1-1
zunicode: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
md: bind
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 524222464
md0:
ZFS: Loaded module v0.6.1-1, ZFS pool version 5000, ZFS filesystem version 5
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:06:00.0: Disabling ASPM L0s L1
e1000e 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:06:00.0: setting latency timer to 64
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 38 for MSI/MSI-X
e1000e 0000:06:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 34:40:b5:89:e2:0b
e1000e 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:0b:00.0: Disabling ASPM L0s L1
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:0b:00.0: setting latency timer to 64
e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:0b:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:0b:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:0b:00.0: irq 41 for MSI/MSI-X
e1000e 0000:0b:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 34:40:b5:89:e2:0c
e1000e 0000:0b:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0b:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts:
Adding 4194296k swap on /dev/mapper/vg_emcgrid-swap. Priority:-1 extents:1 across:4194296k
sd 0:0:0:1: emc: ALUA failover mode detected
sd 0:0:0:1: emc: at SP A Port 0 (owned, default SP A)
sd 1:0:0:0: emc: ALUA failover mode detected
sd 1:0:0:0: emc: at SP B Port 0 (owned, default SP B)
sd 1:0:0:2: emc: ALUA failover mode detected
sd 1:0:0:2: emc: at SP B Port 0 (owned, default SP B)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None
e1000e 0000:06:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 [email protected]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts:
sd 1:0:0:6: [sdq] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:0:4: [sdo] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 0:0:0:5: [sdf] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:0:8: [sds] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 0:0:0:9: [sdj] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 0:0:0:1: [sdb] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 0:0:0:3: [sdd] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 0:0:0:7: [sdh] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:0:2: [sdm] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:0:0: [sdk] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
SPL: using hostid 0x000a1d00
qla2xxx [0000:1a:00.0]-505f:0: Link is operational (2 Gbps).
scsi 0:0:0:10: Direct-Access DGC RAID 5 0226 PQ: 0 ANSI: 4
sd 0:0:0:10: Attached scsi generic sg23 type 0
sd 0:0:0:10: [sdw] 1121114624 512-byte logical blocks: (574 GB/534 GiB)
sd 0:0:0:10: [sdw] Write Protect is off
sd 0:0:0:10: [sdw] Mode Sense: 87 00 00 08
sd 0:0:0:10: [sdw] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdw: unknown partition table
sd 0:0:0:10: [sdw] Attached SCSI disk
qla2xxx [0000:1a:00.1]-505f:1: Link is operational (2 Gbps).
scsi 1:0:0:10: Direct-Access DGC RAID 5 0226 PQ: 0 ANSI: 4
sd 1:0:0:10: Attached scsi generic sg24 type 0
sd 1:0:0:10: [sdx] 1121114624 512-byte logical blocks: (574 GB/534 GiB)
sd 1:0:0:10: [sdx] Write Protect is off
sd 1:0:0:10: [sdx] Mode Sense: 87 00 00 08
sd 1:0:0:10: [sdx] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdx: unknown partition table
sd 1:0:0:10: [sdx] Attached SCSI disk
qla2xxx [0000:1a:00.0]-801c:0: Abort command issued nexus=0:0:10 -- 1 2002.
sd 1:0:0:10: emc: detected Clariion CX300, flags 0
sd 1:0:0:10: emc: ALUA failover mode detected
sd 1:0:0:10: emc: connected to SP B Port 0 (owned, default SP B)
sd 0:0:0:10: emc: detected Clariion CX300, flags 0
sd 0:0:0:10: emc: ALUA failover mode detected
sd 0:0:0:10: emc: connected to SP A Port 0 (bound, default SP B)
sd 1:0:0:10: emc: ALUA failover mode detected
sd 1:0:0:10: emc: at SP B Port 0 (owned, default SP B)
md: bind
md: raid0 personality registered for level 0
md/raid0:md10: md_size is 1121114112 sectors.
md: RAID0 configuration for md10 - 1 zone
md: zone0=[dm-14]
zone-offset= 0KB, device-offset= 0KB, size= 560557056KB
md10: detected capacity change from 0 to 574010425344
md10: unknown partition table
EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts:
md10: detected capacity change from 574010425344 to 0
md: md10 stopped.
md: unbind
md: export_rdev(dm-14)
md127: detected capacity change from 547056779264 to 0
md: md127 stopped.
md: unbind
md: export_rdev(dm-5)
md: unbind
md: export_rdev(dm-4)
md: unbind
md: export_rdev(dm-2)
md: unbind
md: export_rdev(dm-3)
md: unbind
md: export_rdev(dm-8)