dmesg - ffte
Initializing cgroup subsys cpu
Linux version 3.6.9-gnu (oliva@loongson2f-1) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 PREEMPT Tue Dec 4 08:14:59 UTC 2012
busclock=66000000, cpuclock=797000000, memsize=256, highmemsize=768
bootconsole [early0] enabled
CPU revision is: 00006303 (ICT Loongson-2)
FPU revision is: 00000501
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000010000000 @ 0000000000000000 (usable)
memory: 0000000030000000 @ 0000000010000000 (reserved)
memory: 0000000030000000 @ 0000000090000000 (usable)
memory: 0000000010000000 @ 0000000080000000 (reserved)
Initrd not found or empty - disabling initrd
Zone ranges:
Normal [mem 0x00000000-0xbfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x3fffffff]
node 0: [mem 0x80000000-0xbfffffff]
On node 0 totalpages: 131072
Normal zone: 672 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130400 pages, LIFO batch:7
Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 512kB 4-way, linesize 32 bytes.
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130400
Kernel command line: console=tty no_auto_cmd machtype=8.9 root=/dev/sda6 resume=/dev/sda5 libata.force=80c PMON_VER=LM8089-1.4.9a EC_VER=PQ1D28 machtype=lemote-yeeloong-2f-8.9inches
PID hash table entries: 4096 (order: 1, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
__ex_table already sorted, skipping sort
Memory: 1030672k/1048576k available (6188k kernel code, 17904k reserved, 1820k data, 336k init, 0k highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:128
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
Calibrating delay loop... 528.38 BogoMIPS (lpj=1056768)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 1024
Initializing cgroup subsys net_cls
Checking for the daddi bug... no.
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
bio: create slab at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
pci_bus 0000:00: root bus resource [io 0x4000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci 0000:00:07.0: [10ec:8139] type 00 class 0x020000
pci 0000:00:07.0: reg 10: [io 0xb100-0xb1ff]
pci 0000:00:07.0: reg 14: [mem 0x05026100-0x050261ff]
pci 0000:00:07.0: reg 30: [mem 0x05000000-0x0501ffff pref]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D1 D2 D3hot
pci 0000:00:08.0: [126f:0712] type 00 class 0x030000
pci 0000:00:08.0: reg 10: [mem 0x04000000-0x04ffffff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:09.0: [1033:0035] type 00 class 0x0c0310
pci 0000:00:09.0: reg 10: [mem 0x05025000-0x05025fff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:09.1: [1033:00e0] type 00 class 0x0c0320
pci 0000:00:09.1: reg 10: [mem 0x05026000-0x050260ff]
pci 0000:00:09.1: supports D1 D2
pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
pci 0000:00:0e.0: reg 10: [io 0xb390-0xb397]
pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:00:0e.0: reg 18: [io 0xb300-0xb33f]
pci 0000:00:0e.0: reg 20: [io 0xb280-0xb2ff]
pci 0000:00:0e.0: reg 24: [io 0xb340-0xb35f]
pci 0000:00:0e.2: [1022:209a] type 00 class 0x010180
pci 0000:00:0e.2: reg 20: [io 0xb380-0xb38f]
pci 0000:00:0e.3: [1022:2093] type 00 class 0x040100
pci 0000:00:0e.3: reg 10: [io 0xb200-0xb27f]
pci 0000:00:0e.4: [1022:2094] type 00 class 0x0c0310
pci 0000:00:0e.4: reg 10: [mem 0x05024000-0x05024fff]
pci 0000:00:0e.5: [1022:2095] type 00 class 0x0c0320
pci 0000:00:0e.5: reg 10: [mem 0x05023000-0x05023fff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:08.0: BAR 0: assigned [mem 0x40000000-0x40ffffff]
pci 0000:00:07.0: BAR 6: assigned [mem 0x41000000-0x4101ffff pref]
pci 0000:00:09.0: BAR 0: assigned [mem 0x41020000-0x41020fff]
pci 0000:00:0e.4: BAR 0: assigned [mem 0x41021000-0x41021fff]
pci 0000:00:0e.5: BAR 0: assigned [mem 0x41022000-0x41022fff]
pci 0000:00:07.0: BAR 0: assigned [io 0x4000-0x40ff]
pci 0000:00:07.0: BAR 1: assigned [mem 0x41023000-0x410230ff]
pci 0000:00:09.1: BAR 0: assigned [mem 0x41023100-0x410231ff]
pci 0000:00:0e.0: BAR 1: assigned [io 0x4400-0x44ff]
pci 0000:00:0e.0: BAR 4: assigned [io 0x4800-0x487f]
pci 0000:00:0e.3: BAR 0: assigned [io 0x4880-0x48ff]
pci 0000:00:0e.0: BAR 2: assigned [io 0x4c00-0x4c3f]
pci 0000:00:0e.0: BAR 5: assigned [io 0x4c40-0x4c5f]
pci 0000:00:0e.2: BAR 4: assigned [io 0x4c60-0x4c6f]
pci 0000:00:0e.0: BAR 0: assigned [io 0x4c70-0x4c77]
slot: 7, pin: 1, irq: 37
slot: 8, pin: 1, irq: 38
slot: 9, pin: 1, irq: 39
slot: 9, pin: 1, irq: 39
Switching to clocksource mfgpt1
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 5, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 1, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: Enabling device 0000:00:09.0 (0140 -> 0142)
PCI: Enabling device 0000:00:0e.4 (0000 -> 0002)
PCI: CLS 32 bytes, default 32
audit: initializing netlink socket (disabled)
type=2000 audit(1355041450.988:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 2013
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
brd: module loaded
scsi0 : pata_cs5536
scsi1 : pata_cs5536
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c60 irq 14
ata2: DUMMY
pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
smtcfb 0000:00:08.0: Silicon Motion display driver.
ata1: FORCE: cable set to 80c
ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Console: switching to colour frame buffer device 128x37
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
smtcfb 0000:00:08.0: Silicon Motion SM712 RevB0 primary display mode 1024x600-16 Init Complete.
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2012-12-09 08:24:11 UTC (1355041451)
EXT4-fs (sda6): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda6): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
devtmpfs: mounted
Freeing unused kernel memory: 336k freed
udev[470]: starting version 164
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usbcore: registered new interface driver usbfs
YeeLoong Laptop platform specific driver loaded.
8139cp 0000:00:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
usbcore: registered new interface driver hub
Registered YeeLoong backlight driver.
Registered YeeLoong battery and AC driver.
usbcore: registered new device driver usb
Registered YeeLoong hardware monitor driver.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Registered YeeLoong video output driver.
ehci_hcd 0000:00:09.1: EHCI Host Controller
ehci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 1
Registered YeeLoong lcd output driver.
Registered YeeLoong hotkey input driver.
ehci_hcd 0000:00:09.1: irq 39, io mem 0x41023100
8139too: 8139too Fast Ethernet driver 0.9.28
input: HotKeys as /devices/virtual/input/input1
ehci_hcd 0000:00:09.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.9-gnu ehci_hcd
usb usb1: SerialNumber: 0000:00:09.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
8139too 0000:00:07.0: eth0: RealTek RTL8139 at 0x9000000041023000, 00:23:8b:35:6e:61, IRQ 37
psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.0.1, sn: 0, sw: 1.1.0-K
ehci_hcd 0000:00:0e.5: setting latency timer to 64
ehci_hcd 0000:00:0e.5: EHCI Host Controller
ehci_hcd 0000:00:0e.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0e.5: irq 11, io mem 0x41022000
ehci_hcd 0000:00:0e.5: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.9-gnu ehci_hcd
usb usb2: SerialNumber: 0000:00:0e.5
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
snd_cs5535audio 0000:00:0e.3: setting latency timer to 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:09.0: OHCI Host Controller
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
usb 2-1: New USB device found, idVendor=0bda, idProduct=0158
ohci_hcd 0000:00:09.0: irq 39, io mem 0x41020000
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: USB2.0-CRW
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 20071114173400000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.9-gnu ohci_hcd
usb 2-4: new high-speed USB device number 3 using ehci_hcd
usb usb3: SerialNumber: 0000:00:09.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:0e.4: setting latency timer to 64
ohci_hcd 0000:00:0e.4: OHCI Host Controller
ohci_hcd 0000:00:0e.4: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:0e.4: irq 11, io mem 0x41021000
usb 2-4: New USB device found, idVendor=0bda, idProduct=8189
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: RTL8187B_WLAN_Adapter
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb 2-4: Manufacturer: Manufacturer_Realtek
usb 2-4: SerialNumber: 00e04c000001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.9-gnu ohci_hcd
usb usb4: SerialNumber: 0000:00:0e.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi2 : usb-storage 2-1:1.0
usbcore: registered new interface driver ums-realtek
cfg80211: Calling CRDA to update world regulatory domain
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: hwaddr 00:17:c4:4d:e8:62, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
rtl8187: Customer ID is 0x00
Registered led device: rtl8187-phy0::radio
Registered led device: rtl8187-phy0::tx
Registered led device: rtl8187-phy0::rx
rtl8187: wireless switch is on
usbcore: registered new interface driver rtl8187
scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Adding 1951728k swap on /dev/sda5. Priority:-1 extents:1 across:1951728k
EXT4-fs (sda6): re-mounted. Opts: (null)
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.20)
8139too 0000:00:07.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
sshd (1841): /proc/1841/oom_adj is deprecated, please use /proc/1841/oom_score_adj instead.