dmesg - AMD_955_kernel

Return To AMD_955_kernel System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfdbffff] usable
BIOS-e820: [mem 0x00000000cfdc0000-0x00000000cfdf0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdf1000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990XA-UD3/GA-990XA-UD3, BIOS F3 05/19/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFF00000000 write-back
  5 base 000200000000 mask FFFE00000000 write-back
  6 base 000400000000 mask FFFFE0000000 write-back
  7 base 000420000000 mask FFFFF0000000 write-back
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16896MB, range: 256MB, type WB
total RAM covered: 3326M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfdc0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4af0-0x000f4aff] mapped at [ffff8800000f4af0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfdbffff]
 [mem 0x00000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcfbfffff] page 2M
 [mem 0xcfc00000-0xcfdbffff] page 4k
kernel direct mapping tables up to 0xcfdbffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x42fffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
 [mem 0x400000000-0x42fffffff] page 2M
kernel direct mapping tables up to 0x42fffffff @ [mem 0xcfdbe000-0xcfdbffff]
RAMDISK: [mem 0x362e6000-0x3716afff]
ACPI: RSDP 00000000000f69e0 00014 (v00 GBT   )
ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdf1100 07A4B (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfdc0000 00040
ACPI: MSDM 00000000cfdf8c40 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cfdf8cc0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdf8d00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdf8d80 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000cfdf8df0 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfdf8b80 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042fffffff]
Initmem setup node 0 [mem 0x00000000-0x42fffffff]
  NODE_DATA [mem 0x42fffc000-0x42fffffff]
 [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x42fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0xcfdbffff]
  node   0: [mem 0x100000000-0x42fffffff]
On node 0 totalpages: 4193615
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3913 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 830976 pages, LIFO batch:31
  Normal zone: 52224 pages used for memmap
  Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfdc0000 - 00000000cfdf1000
PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4125001
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ c4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 16349112k/17563648k available (6711k kernel code, 789188k absent, 425348k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 4018.328 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.65 BogoMIPS (lpj=16073312)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (32146.62 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfdc0000-0xcfdf0fff] (200704 bytes)
dummy: 
RTC time: 12:04:52, date: 10/22/12
NET: Registered protocol family 16
node 0 link 0: io port [9000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
TOM2: 0000000430000000 aka 17152M
bus: [00, 06] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0700000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe06fffff]
bus: 00 [mem 0x430000000-0xfcffffffff]
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20120320/tbutils-323)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: >host bridge window [mem 0xd0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: >root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: >[1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: >reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: >[1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: >[1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: >[1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: >[1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: >reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: >reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: >reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: >reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: >reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: >reg 24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:11.0: >set SATA to AHCI mode
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: >reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: >reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io  0xfa00-0xfa0f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: >reg 10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: >[1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: >supports D1 D2
pci 0000:00:16.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: >reg 10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: >reg 10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: >supports D1 D2
pci 0000:00:16.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: >[1022:1200] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1201] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1202] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1203] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1204] type 00 class 0x060000
pci 0000:01:00.0: >[10de:0e22] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:01:00.0: >reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xdc000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 24: [io  0xcf00-0xcf7f]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: >[10de:0beb] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfbffc000-0xfbffffff]
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: >  bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0: >  bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: >[1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: >reg 10: [mem 0xfd9f8000-0xfd9fffff 64bit]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
Freeing initrd memory: 14868k freed
pci 0000:00:04.0: >PCI bridge to [bus 02-02]
pci 0000:00:04.0: >  bridge window [io  0xb000-0xbfff]
pci 0000:00:04.0: >  bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: >  bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [io  0xee00-0xeeff]
pci 0000:03:00.0: >reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:03:00.0: >reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: >PCI bridge to [bus 03-03]
pci 0000:00:09.0: >  bridge window [io  0xe000-0xefff]
pci 0000:00:09.0: >  bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: >  bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:00.0: >[1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: >reg 10: [mem 0xfddf8000-0xfddfffff 64bit]
pci 0000:04:00.0: >supports D1 D2
pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: >PCI bridge to [bus 04-04]
pci 0000:00:0a.0: >  bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0: >  bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: >  bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:05:0e.0: >[1106:3044] type 00 class 0x0c0010
pci 0000:05:0e.0: >reg 10: [mem 0xfdbff000-0xfdbff7ff]
pci 0000:05:0e.0: >reg 14: [io  0xaf00-0xaf7f]
pci 0000:05:0e.0: >supports D2
pci 0000:05:0e.0: >PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: >PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:14.4: >  bridge window [io  0xa000-0xafff]
pci 0000:00:14.4: >  bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: >  bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:14.4: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: >  bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: >  bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: >  bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: >  bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: >PCI bridge to [bus 06-06]
pci 0000:00:15.0: >  bridge window [io  0x9000-0x9fff]
pci 0000:00:15.0: >  bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: >  bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
 pci0000:00: >Requesting ACPI _OSC control (0x1d)
 pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: >no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfdc0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io  0x0cf8-0x0cff]
pnp 00:00: >[io  0x0000-0x0cf7 window]
pnp 00:00: >[io  0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
pnp 00:00: >[mem 0xd0000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[io  0x0010-0x001f]
pnp 00:01: >[io  0x0022-0x003f]
pnp 00:01: >[io  0x0044-0x004d]
pnp 00:01: >[io  0x0050-0x005f]
pnp 00:01: >[io  0x0062-0x0063]
pnp 00:01: >[io  0x0065-0x006f]
pnp 00:01: >[io  0x0074-0x007f]
pnp 00:01: >[io  0x0091-0x0093]
pnp 00:01: >[io  0x00a2-0x00bf]
pnp 00:01: >[io  0x00e0-0x00ef]
pnp 00:01: >[io  0x04d0-0x04d1]
pnp 00:01: >[io  0x0220-0x0225]
pnp 00:01: >[io  0x0290-0x0294]
system 00:01: >[io  0x04d0-0x04d1] has been reserved
system 00:01: >[io  0x0220-0x0225] has been reserved
system 00:01: >[io  0x0290-0x0294] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io  0x0900-0x091f]
pnp 00:02: >[io  0x0228-0x022f]
pnp 00:02: >[io  0x040b]
pnp 00:02: >[io  0x04d6]
pnp 00:02: >[io  0x0c00-0x0c01]
pnp 00:02: >[io  0x0c14]
pnp 00:02: >[io  0x0c50-0x0c52]
pnp 00:02: >[io  0x0c6c-0x0c6d]
pnp 00:02: >[io  0x0c6f]
pnp 00:02: >[io  0x0cd0-0x0cd1]
pnp 00:02: >[io  0x0cd2-0x0cd3]
pnp 00:02: >[io  0x0cd4-0x0cdf]
pnp 00:02: >[io  0x0800-0x08fe]
pnp 00:02: >[io  0x0a10-0x0a17]
pnp 00:02: >[io  0x0b00-0x0b0f]
pnp 00:02: >[io  0x0b10-0x0b1f]
pnp 00:02: >[io  0x0b20-0x0b3f]
pnp 00:02: >[mem 0x00000000-0x00000fff window]
pnp 00:02: >[mem 0xfee00400-0xfee00fff window]
pnp 00:02: >disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: >disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
system 00:02: >[io  0x0900-0x091f] has been reserved
system 00:02: >[io  0x0228-0x022f] has been reserved
system 00:02: >[io  0x040b] has been reserved
system 00:02: >[io  0x04d6] has been reserved
system 00:02: >[io  0x0c00-0x0c01] has been reserved
system 00:02: >[io  0x0c14] has been reserved
system 00:02: >[io  0x0c50-0x0c52] has been reserved
system 00:02: >[io  0x0c6c-0x0c6d] has been reserved
system 00:02: >[io  0x0c6f] has been reserved
system 00:02: >[io  0x0cd0-0x0cd1] has been reserved
system 00:02: >[io  0x0cd2-0x0cd3] has been reserved
system 00:02: >[io  0x0cd4-0x0cdf] has been reserved
system 00:02: >[io  0x0800-0x08fe] has been reserved
system 00:02: >[io  0x0a10-0x0a17] has been reserved
system 00:02: >[io  0x0b00-0x0b0f] has been reserved
system 00:02: >[io  0x0b10-0x0b1f] has been reserved
system 00:02: >[io  0x0b20-0x0b3f] has been reserved
system 00:02: >[mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[dma 4]
pnp 00:03: >[io  0x0000-0x000f]
pnp 00:03: >[io  0x0080-0x0090]
pnp 00:03: >[io  0x0094-0x009f]
pnp 00:03: >[io  0x00c0-0x00df]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: >[irq 0 disabled]
pnp 00:04: >[irq 8]
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io  0x0070-0x0073]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: >[io  0x0061]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: >[io  0x00f0-0x00ff]
pnp 00:07: >[irq 13]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: >[io  0x03f8-0x03ff]
pnp 00:08: >[irq 4]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[mem 0xe0000000-0xefffffff]
system 00:09: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x000cda00-0x000cffff]
pnp 00:0a: >[mem 0x000f0000-0x000f7fff]
pnp 00:0a: >[mem 0x000f8000-0x000fbfff]
pnp 00:0a: >[mem 0x000fc000-0x000fffff]
pnp 00:0a: >[mem 0xcfdc0000-0xcfdfffff]
pnp 00:0a: >[mem 0xffff0000-0xffffffff]
pnp 00:0a: >[mem 0x00000000-0x0009ffff]
pnp 00:0a: >[mem 0x00100000-0xcfdbffff]
pnp 00:0a: >[mem 0xcfe00000-0xcfefffff]
pnp 00:0a: >[mem 0xcff00000-0xcfffffff]
pnp 00:0a: >[mem 0xfec00000-0xfec00fff]
pnp 00:0a: >[mem 0xfee00000-0xfee00fff]
pnp 00:0a: >[mem 0xfff80000-0xfffeffff]
pnp 00:0a: >disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x00100000-0xcfdbffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0a: >[mem 0xcfdc0000-0xcfdfffff] could not be reserved
system 00:0a: >[mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: >[mem 0xcfe00000-0xcfefffff] has been reserved
system 00:0a: >[mem 0xcff00000-0xcfffffff] could not be reserved
system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: >[mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0a: >[mem 0xfff80000-0xfffeffff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: >  bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0: >  bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: >PCI bridge to [bus 02-02]
pci 0000:00:04.0: >  bridge window [io  0xb000-0xbfff]
pci 0000:00:04.0: >  bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: >  bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:09.0: >PCI bridge to [bus 03-03]
pci 0000:00:09.0: >  bridge window [io  0xe000-0xefff]
pci 0000:00:09.0: >  bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: >  bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:0a.0: >PCI bridge to [bus 04-04]
pci 0000:00:0a.0: >  bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0: >  bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: >  bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 05-05]
pci 0000:00:14.4: >  bridge window [io  0xa000-0xafff]
pci 0000:00:14.4: >  bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: >  bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:15.0: >PCI bridge to [bus 06-06]
pci 0000:00:15.0: >  bridge window [io  0x9000-0x9fff]
pci 0000:00:15.0: >  bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: >  bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: >resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: >resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: >resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: >resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:03: >resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: >resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:03: >resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:04: >resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: >resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: >resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:05: >resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: >resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:05: >resource 2 [mem 0xfda00000-0xfdafffff pref]
pci_bus 0000:05: >resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: >resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: >resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:05: >resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:06: >resource 0 [io  0x9000-0x9fff]
pci_bus 0000:06: >resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: >resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1350907492.596:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32089
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfdffd000
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >5 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >5 ports detected
ehci_hcd 0000:00:16.2: >EHCI Host Controller
ehci_hcd 0000:00:16.2: >new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: >debug port 1
ehci_hcd 0000:00:16.2: >irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: >USB 2.0 started, EHCI 1.00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: EHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb3: >SerialNumber: 0000:00:16.2
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: >irq 18, io mem 0xfdffe000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:12.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >5 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfdffc000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >5 ports detected
ohci_hcd 0000:00:14.5: >OHCI Host Controller
ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfdffa000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:14.5
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
ohci_hcd 0000:00:16.0: >OHCI Host Controller
ohci_hcd 0000:00:16.0: >new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: >irq 18, io mem 0xfdff9000
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: OHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb7: >SerialNumber: 0000:00:16.0
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: >irq 16, io mem 0xfd9f8000
xhci_hcd 0000:02:00.0: >irq 40 for MSI/MSI-X
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: xHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb8: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 9
usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: >Product: xHCI Host Controller
usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb9: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: >USB hub found
hub 9-0:1.0: >2 ports detected
xhci_hcd 0000:04:00.0: >xHCI Host Controller
xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: >irq 18, io mem 0xfddf8000
xhci_hcd 0000:04:00.0: >irq 41 for MSI/MSI-X
usb usb10: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: >Product: xHCI Host Controller
usb usb10: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb10: >SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: >USB hub found
hub 10-0:1.0: >2 ports detected
xhci_hcd 0000:04:00.0: >xHCI Host Controller
xhci_hcd 0000:04:00.0: >new USB bus registered, assigned bus number 11
usb usb11: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: >Product: xHCI Host Controller
usb usb11: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb11: >SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: >USB hub found
hub 11-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: M4-CT128M4SSD2, 010G, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >Direct-Access     ATA      M4-CT128M4SSD2   010G PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: >[sda] Attached SCSI disk
ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: >Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: >[sdb] Write Protect is off
sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 1:0:0:0: >[sdb] Attached SCSI disk
usb 5-5: >new low-speed USB device number 2 using ohci_hcd
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: >RTC can wake from S4
rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
  Magic number: 0:463:77
rtc_cmos 00:05: >setting system clock to 2012-10-22 12:04:53 UTC (1350907493)
powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[106]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: >irq 42 for MSI/MSI-X
r8169 0000:03:00.0: >eth0: RTL8168evl/8111evl at 0xffffc9000187a000, 50:e5:49:b5:1d:47, XID 0c900800 IRQ 42
r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 5-5: >New USB device found, idVendor=0e8f, idProduct=0020
usb 5-5: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-5: >Product: PS2toUSB Adapter
usb 5-5: >Manufacturer: GASIA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata5.00: ATAPI: ASUS    DRW-24B1ST   a, 1.04, max UDMA/100
ata5.00: limited to UDMA/33 due to 40-wire cable
ata5.00: configured for UDMA/33
scsi 4:0:0:0: >CD-ROM            ASUS     DRW-24B1ST   a   1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: >Attached scsi CD-ROM sr0
sr 4:0:0:0: >Attached scsi generic sg2 type 5
input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input2
hid-generic 0003:0E8F:0020.0001: >input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:13.0-5/input0
input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.1/input/input3
hid-generic 0003:0E8F:0020.0002: >input,hidraw1: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:13.0-5/input1
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261842
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8522
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8904
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 270799
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573851
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8361
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573784
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 263882
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573823
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573742
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573825
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573829
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573806
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573833
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573866
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573868
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573860
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573764
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573779
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1573883
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1570665
EXT4-fs (sda1): 21 orphan inodes deleted
EXT4-fs (sda1): recovery complete
firewire_ohci 0000:05:0e.0: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 4018.267 MHz.
Switching to clocksource tsc
Adding 7846908k swap on /dev/sda4.  Priority:-1 extents:1 across:7846908k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[366]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xb8fe00 already in use
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
microcode: CPU0: patch_level=0x010000c8
kvm: disabled by bios
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
kvm: disabled by bios
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.43  Sun Aug 19 20:14:03 PDT 2012
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU2: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU3: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
kvm: disabled by bios
firewire_core 0000:05:0e.0: created device fw0: GUID 0049e550de8f0400, S400
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
init: udev-fallback-graphics main process (793) terminated with status 1
init: failsafe main process (819) killed by TERM signal
type=1400 audit(1350921898.927:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=901 comm="apparmor_parser"
type=1400 audit(1350921898.927:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=901 comm="apparmor_parser"
type=1400 audit(1350921898.927:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=903 comm="apparmor_parser"
type=1400 audit(1350921898.927:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=903 comm="apparmor_parser"
type=1400 audit(1350921898.927:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=904 comm="apparmor_parser"
type=1400 audit(1350921898.927:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
type=1400 audit(1350921898.927:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser"
type=1400 audit(1350921898.927:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=902 comm="apparmor_parser"
type=1400 audit(1350921898.927:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=902 comm="apparmor_parser"
type=1400 audit(1350921898.931:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=922 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: lightdm main process (1034) killed by TERM signal
r8169 0000:03:00.0: >eth0: link down
r8169 0000:03:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NVRM: GPU at 0000:01:00: GPU-10043d95-b9e9-840e-9e6a-7b3f23c40391
init: plymouth main process (280) killed by SEGV signal
r8169 0000:03:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: GPU at 0000:01:00: GPU-10043d95-b9e9-840e-9e6a-7b3f23c40391
show_signal_msg: 39 callbacks suppressed
nautilus[4339]: segfault at b408 ip 00007f6607a468b3 sp 00007fff66073d30 error 4 in libgtk-3.so.0.600.0[7f6607794000+4a8000]
ptrace of pid 10421 was attempted by: do-not-directly (pid 10429)
ptrace of pid 10423 was attempted by: do-not-directly (pid 10429)
ptrace of pid 10424 was attempted by: do-not-directly (pid 10429)
ptrace of pid 10425 was attempted by: do-not-directly (pid 10429)
ptrace of pid 10426 was attempted by: do-not-directly (pid 10429)
ptrace of pid 10428 was attempted by: do-not-directly (pid 10429)

Return To AMD_955_kernel System Information