dmesg - Stock
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-6-generic (buildd@allspice) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-5ubuntu1) ) #6-Ubuntu SMP Mon Jul 23 19:52:14 UTC 2012 (Ubuntu 3.5.0-6.6-generic 3.5.0)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbd6cfff] usable
BIOS-e820: [mem 0x00000000bbd6d000-0x00000000bc56cfff] reserved
BIOS-e820: [mem 0x00000000bc56d000-0x00000000bc66cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bc66d000-0x00000000bcffefff] ACPI data
BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013dffffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BE000000 mask FFE000000 uncachable
4 base 0BD800000 mask FFF800000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 13E000000 mask FFE000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xbcffffff]
[mem 0x00000000-0xbcffffff] page 2M
kernel direct mapping tables up to 0xbcffffff @ [mem 0x1fa14000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x13dffffff]
[mem 0x100000000-0x13dffffff] page 2M
kernel direct mapping tables up to 0x13dffffff @ [mem 0xbbd67000-0xbbd6cfff]
RAMDISK: [mem 0x3647c000-0x37235fff]
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 3996MB)
ACPI: RSDP 00000000000f2e10 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bcffe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bcffc000 000F4 (v03 HPQOEM 161C 0000000F HP 00000001)
ACPI: DSDT 00000000bcfd3000 23F4D (v02 HPQOEM 161C 00000001 INTL 20060912)
ACPI: FACS 00000000bc655000 00040
ACPI: HPET 00000000bcffb000 00038 (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: APIC 00000000bcffa000 000BC (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: MCFG 00000000bcff9000 0003C (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: TCPA 00000000bcff7000 00032 (v02 HPQOEM 161C 00000000 HP 00000001)
ACPI: SSDT 00000000bcfd0000 00271 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bcfcf000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bcfce000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bcfcd000 007CE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bcfcc000 009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: DMAR 00000000bcfcb000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 00000000bcff8000 000A5 (v32 HPQOEM 161C 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013dffffff]
Initmem setup node 0 [mem 0x00000000-0x13dffffff]
NODE_DATA [mem 0x13dffc000-0x13dffffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880139600000-ffff88013d5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xbbd6cfff]
node 0: [mem 0xbcfff000-0xbcffffff]
node 0: [mem 0x100000000-0x13dffffff]
On node 0 totalpages: 1023228
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 748974 pages, LIFO batch:31
Normal zone: 3968 pages used for memmap
Normal zone: 249984 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bbd6d000 - 00000000bc56d000
PM: Registered nosave memory: 00000000bc56d000 - 00000000bc66d000
PM: Registered nosave memory: 00000000bc66d000 - 00000000bcfff000
PM: Registered nosave memory: 00000000bd000000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013dc00000 s83520 r8192 d22976 u262144
pcpu-alloc: s83520 r8192 d22976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002870
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3799448k/5210112k available (6661k kernel code, 1117200k absent, 293464k reserved, 6506k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2494.496 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.99 BogoMIPS (lpj=9977984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 24972 entries in 98 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000bc54a000 end: 0x000000bc569fff
DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (19955.96 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbc56d000-0xbc66cfff] (1048576 bytes)
dummy:
RTC time: 14:08:59, date: 07/27/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bc4f6718 0069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bc4f7a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bc4f5d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
Freeing initrd memory: 14056k freed
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [LPP] (on)
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xd4000000-0xd43fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xd4824000-0xd482400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x4090-0x4097]
pci 0000:00:16.3: reg 14: [mem 0xd482b000-0xd482bfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xd4800000-0xd481ffff]
pci 0000:00:19.0: reg 14: [mem 0xd482a000-0xd482afff]
pci 0000:00:19.0: reg 18: [io 0x4060-0x407f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xd4829000-0xd48293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xd4820000-0xd4823fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd4828000-0xd48283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 14: [io 0x409c-0x409f]
pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 1c: [io 0x4098-0x409b]
pci 0000:00:1f.2: reg 20: [io 0x4040-0x405f]
pci 0000:00:1f.2: reg 24: [mem 0xd4827000-0xd48277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:23:00.0: [197b:2392] type 00 class 0x088000
pci 0000:23:00.0: reg 10: [mem 0xd4604000-0xd46040ff]
pci 0000:23:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
pci 0000:23:00.2: reg 10: [mem 0xd4603000-0xd46030ff]
pci 0000:00:1c.2: PCI bridge to [bus 23-23]
pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:24:00.0: [8086:0085] type 00 class 0x028000
pci 0000:24:00.0: reg 10: [mem 0xd4500000-0xd4501fff 64bit]
pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 24-24]
pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:25:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:25:00.0: reg 10: [mem 0xd4400000-0xd4401fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 25-25]
pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbd6d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x13e000000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xbfa00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfedfffff window]
pnp 00:00: [mem 0xfee01000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed10000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0x00000000-0x00000fff]
pnp 00:01: [mem 0xbfa00000-0xbfa00fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed45000-0xfed8ffff]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [io 0xfe00-0xfe0f]
pnp 00:04: [io 0xfe80-0xfe8f]
pnp 00:04: [mem 0xfed40000-0xfed44fff]
pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: [io 0x004e-0x004f]
pnp 00:07: [io 0x0061]
pnp 00:07: [io 0x0063]
pnp 00:07: [io 0x0065]
pnp 00:07: [io 0x0067]
pnp 00:07: [io 0x0070]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x00b2-0x00b3]
pnp 00:07: [io 0x0200-0x027f]
pnp 00:07: [io 0x1000-0x100f]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0x0400-0x047f]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [io 0xef80-0xef9f]
system 00:07: [io 0x0200-0x027f] has been reserved
system 00:07: [io 0x1000-0x100f] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0x0400-0x047f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [io 0xef80-0xef9f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0070-0x0077]
pnp 00:08: [irq 8]
pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077a]
pnp 00:09: [irq 5]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0c: [irq 23]
pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:23:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xbfd00000-0xbfdfffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:23:00.0: BAR 6: assigned [mem 0xbfd00000-0xbfd0ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 23-23]
pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.2: bridge window [mem 0xbfd00000-0xbfdfffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 24-24]
pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:00:1c.7: PCI bridge to [bus 25-25]
pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci_bus 0000:23: resource 1 [mem 0xd4600000-0xd46fffff]
pci_bus 0000:23: resource 2 [mem 0xbfd00000-0xbfdfffff pref]
pci_bus 0000:24: resource 1 [mem 0xd4500000-0xd45fffff]
pci_bus 0000:25: resource 1 [mem 0xd4400000-0xd44fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: enabling device (0000 -> 0002)
pci 0000:00:1d.0: enabling device (0000 -> 0002)
pci 0000:25:00.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb7d67000-0xbbd66fff] (64MB) mapped at [ffff8800b7d67000-ffff8800bbd66fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1343398139.820:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7448
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 103c ss_did 161c
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (55 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (41 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (37 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (32 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [DM1Z] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [DM2Z] (0 C)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery absent)
0000:00:16.3: ttyS4 at I/O 0x4090 (irq = 19) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827180 irq 47
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 47
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4829000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-6-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd4828000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-6-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:25:00.0: irq 19, io mem 0xd4400000
xhci_hcd 0000:25:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:25:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:25:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:25:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:25:00.0: irq 52 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-6-generic xhci_hcd
usb usb3: SerialNumber: 0000:25:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-6-generic xhci_hcd
usb usb4: SerialNumber: 0000:25:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:584:132
acpi device:07: hash matches
rtc_cmos 00:08: setting system clock to 2012-07-27 14:09:00 UTC (1343398140)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-7: INTEL SSDSA2M160G2HP, 2CV102M3, max UDMA/100
ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp DVDRAM GT31L, MR52, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRAM GT31L MR52 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 2494.333 MHz.
Switching to clocksource tsc
usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230
usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-1.4: Product: HP HD Webcam [Fixed]
usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.4: SerialNumber: SN0001
usb 2-1.6: new full-speed USB device number 4 using ehci_hcd
usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: HP Integrated Module
usb 2-1.6: Manufacturer: Broadcom Corp
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1520k freed
Freeing unused kernel memory: 1144k freed
udevd[113]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:23:00.0: SDHCI controller found [197b:2392] (rev 30)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:23:00.0] using DMA
sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 64:31:50:8d:ea:ef
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[401]: starting version 175
Adding 4091900k swap on /dev/sda5. Priority:-1 extents:1 across:4091900k SS
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 54 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 55 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
hp_accel: hardware type HPB64xx found
lis3lv02d: 8 bits 3DC sensor found
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlwifi: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:24:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:24:00.0: pci_resource_base = ffffc900110ec000
iwlwifi 0000:24:00.0: HW Revision ID = 0x34
iwlwifi 0000:24:00.0: irq 56 for MSI/MSI-X
Linux video capture interface: v2.00
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input4
Registered led device: hp::hddprotect
hp_accel: driver loaded
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230)
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp0: using parport0 (interrupt-driven).
tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: failsafe main process (775) killed by TERM signal
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwlwifi 0000:24:00.0: loaded firmware version 17.168.5.3 build 42301
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:24:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:24:00.0: RF_KILL bit toggled to enable radio.
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iwlwifi 0000:24:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:24:00.0: Device SKU: 0x1F0
iwlwifi 0000:24:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:24:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HP WMI hotkeys as /devices/virtual/input/input5
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
tpm_tis 00:04: A TPM error (7) occurred attempting to read a pcr value
tpm_tis 00:04: TPM is disabled/deactivated (0x7)
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
type=1400 audit(1343398143.132:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=936 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:24:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
type=1400 audit(1343398143.328:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=937 comm="apparmor_parser"
type=1400 audit(1343398143.328:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=937 comm="apparmor_parser"
type=1400 audit(1343398143.328:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=937 comm="apparmor_parser"
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
iwlwifi 0000:24:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
type=1400 audit(1343398143.576:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=922 comm="apparmor_parser"
type=1400 audit(1343398143.576:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=922 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
acpi device:0c: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
type=1400 audit(1343398143.688:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=976 comm="apparmor_parser"
type=1400 audit(1343398143.944:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=974 comm="apparmor_parser"
type=1400 audit(1343398143.944:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=974 comm="apparmor_parser"
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0
audit_printk_skb: 9 callbacks suppressed
type=1400 audit(1343398148.060:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.060:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.060:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.064:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.064:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.064:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.064:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=938 comm="apparmor_parser"
type=1400 audit(1343398148.064:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=938 comm="apparmor_parser"
wlan0: authenticate with 00:17:31:bb:0c:46
wlan0: send auth to 00:17:31:bb:0c:46 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:17:31:bb:0c:46 (try 1/3)
wlan0: RX AssocResp from 00:17:31:bb:0c:46 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
type=1400 audit(1343398452.611:22): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=977 comm="cupsd" pid=977 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1343399310.206:23): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=977 comm="cupsd" pid=977 comm="cupsd" capability=36 capname="block_suspend"