SSD RAID Linux 5.5 Performance

Linux 5.5 solid-state drive RAID benchmarks by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 2001248-PTS-SSDRAID643
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs
On Line Graphs With Missing Data, Connect The Line Gaps

Multi-Way Comparison

Condense Comparison
Transpose Comparison

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Single: Btrfs
January 03 2020
  3 Hours, 43 Minutes
Single: EXT4
January 03 2020
  1 Hour, 59 Minutes
Single: F2FS
January 03 2020
  2 Hours, 10 Minutes
Single: XFS
January 04 2020
  2 Hours, 36 Minutes
RAID0: Btrfs
January 04 2020
  4 Hours, 36 Minutes
RAID0: EXT4
January 06 2020
  2 Hours, 32 Minutes
RAID0: F2FS
January 06 2020
  3 Hours, 13 Minutes
RAID0: XFS
January 06 2020
  2 Hours, 43 Minutes
RAID1: Btrfs
January 04 2020
  5 Hours, 25 Minutes
RAID1: EXT4
January 06 2020
  4 Hours, 54 Minutes
RAID1: F2FS
January 07 2020
  4 Hours, 29 Minutes
RAID1: XFS
January 07 2020
  4 Hours, 14 Minutes
RAID5: Btrfs
January 05 2020
  3 Hours, 36 Minutes
RAID5: EXT4
January 07 2020
  5 Hours, 2 Minutes
RAID5: F2FS
January 08 2020
  3 Hours, 46 Minutes
RAID5: XFS
January 08 2020
  4 Hours, 23 Minutes
RAID6: Btrfs
January 05 2020
  4 Hours, 21 Minutes
RAID6: EXT4
January 08 2020
  4 Hours, 27 Minutes
RAID6: F2FS
January 09 2020
  4 Hours, 54 Minutes
RAID6: XFS
January 09 2020
  6 Hours, 16 Minutes
RAID10: Btrfs
January 05 2020
  5 Hours, 13 Minutes
RAID10: EXT4
January 10 2020
  5 Hours, 29 Minutes
RAID10: F2FS
January 11 2020
  4 Hours, 53 Minutes
RAID10: XFS
January 10 2020
  3 Hours, 32 Minutes
Invert Behavior (Only Show Selected Data)
  4 Hours, 6 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Single: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Single: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Single: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Single: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID0: Btrfs

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID0
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID0: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=512 / raid0 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID0: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid0 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID0: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=4096 / raid0 sde[3] sdb[0] sdc[1] sdd[2]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID1: Btrfs

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID1
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID1: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw / raid1 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID1: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid1 sdb[0] sdc[2] sdd[3] sdn[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID1: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw / raid1 sdb[0] sdc[2] sdd[3] sdn[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID5: Btrfs

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID5
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID5: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=384 / raid5 sde[4] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID5: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid5 sde[4] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID5: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=3072 / raid5 sde[4] sdd[2] sdb[0] sdc[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID6: Btrfs

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID6
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID6: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=256 / raid6 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID6: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid6 sdd[2] sde[3] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID6: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid6 sde[3] sdc[1] sdd[2] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID10: Btrfs

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID10
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID10: EXT4

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=256 / raid10 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID10: F2FS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid10 sdd[1] sde[2] sdc[0] sdb[3]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

RAID10: XFS

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid10 sdb[0] sdd[2] sdc[1] sdh[3]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

SSD RAID Linux 5.5 PerformanceOpenBenchmarking.orgPhoronix Test Suite2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads)Dell 02MJ3T (1.2.5 BIOS)AMD 17h16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7RMatrox G200eW32 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIeUbuntu 19.105.5.0-999-generic (x86_64) 20191231GNOME Shell 3.34.1X ServerGCC 9.2.1 20191008btrfsext4f2fsxfsProcessorMotherboardChipsetMemoryDiskGraphicsNetworkOSKernelDesktopDisplay ServerCompilerFile-SystemsSSD RAID Linux 5.5 Performance BenchmarksSystem Logs- --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v - Single: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5- Single: EXT4: MQ-DEADLINE / relatime,rw- Single: F2FS: MQ-DEADLINE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr - Single: XFS: MQ-DEADLINE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw- RAID0: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID0- RAID0: EXT4: NONE / relatime,rw,stripe=512 / raid0 sde[3] sdd[2] sdc[1] sdb[0]- RAID0: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid0 sde[3] sdd[2] sdc[1] sdb[0] - RAID0: XFS: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=4096 / raid0 sde[3] sdb[0] sdc[1] sdd[2] - RAID1: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID1- RAID1: EXT4: NONE / relatime,rw / raid1 sde[3] sdd[2] sdc[1] sdb[0]- RAID1: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid1 sdb[0] sdc[2] sdd[3] sdn[1] - RAID1: XFS: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw / raid1 sdb[0] sdc[2] sdd[3] sdn[1]- RAID5: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID5- RAID5: EXT4: NONE / relatime,rw,stripe=384 / raid5 sde[4] sdd[2] sdc[1] sdb[0]- RAID5: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid5 sde[4] sdd[2] sdc[1] sdb[0] - RAID5: XFS: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=3072 / raid5 sde[4] sdd[2] sdb[0] sdc[1] - RAID6: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID6- RAID6: EXT4: NONE / relatime,rw,stripe=256 / raid6 sde[3] sdd[2] sdc[1] sdb[0]- RAID6: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid6 sdd[2] sde[3] sdc[1] sdb[0] - RAID6: XFS: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid6 sde[3] sdc[1] sdd[2] sdb[0] - RAID10: Btrfs: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID10- RAID10: EXT4: NONE / relatime,rw,stripe=256 / raid10 sde[3] sdd[2] sdc[1] sdb[0]- RAID10: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid10 sdd[1] sde[2] sdc[0] sdb[3] - RAID10: XFS: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid10 sdb[0] sdd[2] sdc[1] sdh[3] - CPU Microcode: 0x8001227- Python 2.7.17rc1 + Python 3.7.5rc1- itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

startup-time: Only Seq Reads - xterm - Default Test Directorystartup-time: Seq Reads + Writes - xterm - Default Test Directorystartup-time: Only Seq Reads - GNOME Terminal - Default Test Directorystartup-time: Only Seq Reads - LibreOffice Writer - Default Test Directorystartup-time: Seq Reads + Writes - GNOME Terminal - Default Test Directorystartup-time: Seq Reads + Writes - LibreOffice Writer - Default Test Directorysqlite: 1sqlite: 8fio: Rand Read - Linux AIO - Yes - No - 4KB - Default Test Directoryfio: Rand Write - Linux AIO - Yes - No - 4KB - Default Test Directoryfio: Seq Read - Linux AIO - Yes - No - 2MB - Default Test Directoryfio: Seq Write - Linux AIO - Yes - No - 2MB - Default Test Directoryfs-mark: 1000 Files, 1MB Sizefs-mark: 5000 Files, 1MB Size, 4 Threadsfs-mark: 4000 Files, 32 Sub Dirs, 1MB Sizeior: Write Testior: Read Testcompilebench: Initial Createpgbench: Buffer Test - Normal Load - Read WriteSingleRAID0RAID1RAID5RAID6RAID10 Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS34.775517.967495.732061.646053.012733.546069.708147.86569300457405165.3178.8161.9176.71343.45214.673281.9050511.763331.420677.811226.014336.512334.8540032.356118.0401053374367525335171.9179.086.590.00377.69369.624877.4748281.706441.404335.348893.611784.183112.9260046.928217.66653200522261131.7180.0128.6134.71386.43257.994961.4776531.794001.267007.648446.038675.632894.3762232.82484.4731050075533526352185.4160.384.4189.28396.46304.764691.4716677.115783.0446419.845812.78788.757506.2581171.887251.88513220016601284223.8282.5124.3239.16657.36292.014509.81499010.70604.9927846.463734.607422.163016.661036.032121.715104671606671733864210.5583.2209.0184.17388.52362.186514.5143696.507953.2175817.763612.57089.408226.1092553.900218.30683571355331893831188.0304.2176.1167.74458.05329.965840.84562410.007845.0565045.826035.440622.846317.052935.30383.03588451656671907957231.9442.9230.4196.62417.31319.576003.7923284.000222.8815314.93308.121786.630195.68717116.394278.15074516400052237599.0195.2103.1157.62297.90281.282873.4707260.3850830.3212781.464251.820441.1536401.4535640.998133.8511033332767233167136.9133.586.380.51373.21358.082433.6532520.5166390.3018521.585561.1571110.8182500.64988948.580256.821814436550508167105.1151.6108.9164.77386.14204.323489.6921390.4632960.3175931.682782.140420.7483891.01881538.916107.19410333725335041169140.8125.589.2168.79386.08296.033691.1823858.690643.6828122.707114.340110.679546.9306783.301227.680752811566715451019173.3204.4117.892.79490.12289.643232.3218900.2044072.6477830.390522.94377.185976.0578940.358308.0229685935801821424129.2209.274.268.99369.20367.202681.1248445.538661.6233915.263810.28454.776672.9155046.165412.0528315858331767427103.0127.075.886.03452.46252.313609.4733948.762441.8590339.190728.06818.630676.1365046.384221.80310367122667185260599.4125.573.066.49369.78305.022625.4220338.226973.3692017.288611.67008.652675.41756139.651293.46775511026671517728110.2188.893.5104.67513.75291.593188.2823664.939631.5005324.740118.7895.240143.2673342.278398.338805275327176833773.7148.763.562.16362.44367.372174.3927913.750371.1506111.21017.277673.392572.1645847.713562.319816658817178332064.792.658.972.98336.81218.483235.9779786.038531.3751726.700020.13325.552444.6937843.136332.680967799600179452569.690.042.655.09355.75305.492079.2718986.841562.8961420.771513.02028.755835.6478986.543290.6937433104000987741189.8221.7110.9197.11500.32281.343068.9223401.843450.9643335.951224.035563.020561.8670337.344317.23891036825370230199.5210.798.291.34349.95369.262639.0330970.6729170.2583331.849311.464860.6413060.52713943.916240.958822562033644300180.7244.9177.6174.56432.59261.514328.7823171.355630.6847225.029453.850312.381171.5022536.39988.48710333861256861042220.7184.0106.7185.84392.51304.574654.438466OpenBenchmarking.org

Application Start-up Time

This benchmark measures the start-up time of applications when there is some I/O in the background. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Only Sequential Reads - Application To Start: xterm - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs816243240SE +/- 0.007412, N = 3SE +/- 0.007893, N = 3SE +/- 0.004017, N = 3SE +/- 0.121450, N = 3SE +/- 0.054491, N = 12SE +/- 0.035936, N = 9SE +/- 0.197645, N = 9SE +/- 0.151773, N = 12SE +/- 0.123068, N = 3SE +/- 0.035620, N = 3SE +/- 0.026604, N = 9SE +/- 0.155843, N = 12SE +/- 0.037580, N = 9SE +/- 0.037649, N = 12SE +/- 0.025577, N = 12SE +/- 0.264581, N = 9SE +/- 0.062133, N = 9SE +/- 0.022046, N = 12SE +/- 0.087434, N = 9SE +/- 0.106575, N = 12SE +/- 0.085574, N = 12SE +/- 0.152081, N = 12SE +/- 0.134867, N = 12SE +/- 0.034642, N = 31.7940001.7064401.76333034.7755006.0385303.7503704.9396308.2269708.7624405.5386600.2044078.6906400.4632960.5166390.3850834.0002201.3556300.6729171.8434506.84156010.0078406.50795010.7060007.115780

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: xterm - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs48121620SE +/- 0.009528, N = 3SE +/- 0.023516, N = 3SE +/- 0.014640, N = 3SE +/- 0.199033, N = 6SE +/- 0.061645, N = 12SE +/- 0.015238, N = 12SE +/- 0.029180, N = 12SE +/- 0.055449, N = 12SE +/- 0.131339, N = 12SE +/- 0.017753, N = 12SE +/- 0.419100, N = 12SE +/- 0.086821, N = 9SE +/- 0.015736, N = 9SE +/- 0.018173, N = 9SE +/- 0.014444, N = 12SE +/- 0.121435, N = 12SE +/- 0.024292, N = 12SE +/- 0.008816, N = 12SE +/- 0.027558, N = 12SE +/- 0.047374, N = 12SE +/- 0.070902, N = 4SE +/- 0.053719, N = 12SE +/- 0.024902, N = 3SE +/- 0.037447, N = 121.2670001.4043301.42067017.9674001.3751701.1506101.5005303.3692001.8590301.6233902.6477803.6828100.3175930.3018520.3212782.8815300.6847220.2583330.9643332.8961405.0565003.2175804.9927803.044640

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Only Sequential Reads - Application To Start: GNOME Terminal - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs20406080100SE +/- 0.01631, N = 3SE +/- 0.04835, N = 3SE +/- 0.01634, N = 3SE +/- 0.71070, N = 3SE +/- 0.22180, N = 3SE +/- 0.19153, N = 3SE +/- 0.36026, N = 3SE +/- 0.24142, N = 3SE +/- 0.50722, N = 3SE +/- 0.16662, N = 3SE +/- 2.55892, N = 9SE +/- 0.34990, N = 3SE +/- 0.07719, N = 12SE +/- 0.04695, N = 12SE +/- 0.04657, N = 12SE +/- 0.78610, N = 12SE +/- 0.06866, N = 3SE +/- 0.03872, N = 12SE +/- 0.17274, N = 12SE +/- 0.23225, N = 6SE +/- 0.47926, N = 3SE +/- 0.10985, N = 3SE +/- 0.47888, N = 8SE +/- 0.31761, N = 127.648445.348897.8112295.7320026.7000011.2101024.7401017.2886039.1907015.2638030.3905022.707101.682781.585561.4642514.933005.029451.849315.9512220.7715045.8260017.7636046.4637019.84580

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Only Sequential Reads - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs1428425670SE +/- 0.005102, N = 3SE +/- 0.041717, N = 3SE +/- 0.011398, N = 3SE +/- 0.827731, N = 9SE +/- 0.012418, N = 3SE +/- 0.112266, N = 3SE +/- 0.220749, N = 5SE +/- 0.191342, N = 3SE +/- 0.365878, N = 5SE +/- 0.088326, N = 3SE +/- 1.950546, N = 9SE +/- 0.220382, N = 12SE +/- 0.075823, N = 12SE +/- 0.053631, N = 12SE +/- 0.102438, N = 12SE +/- 0.570641, N = 9SE +/- 0.093885, N = 12SE +/- 0.062840, N = 12SE +/- 0.078180, N = 12SE +/- 0.181354, N = 12SE +/- 0.349625, N = 8SE +/- 0.201190, N = 3SE +/- 0.449117, N = 5SE +/- 0.195276, N = 126.0386703.6117806.01433061.64600020.1332007.27767018.78900011.67000028.06810010.28450022.94370014.3401002.1404201.1571111.8204408.1217803.8503101.4648604.03556013.02020035.44060012.57080034.60740012.787800

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: GNOME Terminal - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs1224364860SE +/- 0.013567, N = 3SE +/- 0.019191, N = 3SE +/- 0.009393, N = 3SE +/- 0.711449, N = 3SE +/- 0.187340, N = 12SE +/- 0.031917, N = 10SE +/- 0.130933, N = 12SE +/- 0.046415, N = 3SE +/- 0.072080, N = 3SE +/- 0.062336, N = 5SE +/- 0.423513, N = 12SE +/- 0.149649, N = 12SE +/- 0.026823, N = 12SE +/- 0.055703, N = 12SE +/- 0.028505, N = 12SE +/- 0.277801, N = 12SE +/- 0.158264, N = 12SE +/- 0.015592, N = 12SE +/- 0.048914, N = 3SE +/- 0.137693, N = 12SE +/- 0.192940, N = 3SE +/- 0.153551, N = 3SE +/- 0.078585, N = 3SE +/- 0.120651, N = 45.6328904.1831106.51233053.0127005.5524403.3925705.2401408.6526708.6306704.7766707.18597010.6795400.7483890.8182501.1536406.6301902.3811700.6413063.0205608.75583022.8463009.40822022.1630008.757500

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 3.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs816243240SE +/- 0.009721, N = 3SE +/- 0.022316, N = 3SE +/- 0.028225, N = 3SE +/- 0.251992, N = 3SE +/- 0.508145, N = 9SE +/- 0.023827, N = 12SE +/- 0.126927, N = 12SE +/- 0.082398, N = 12SE +/- 0.083129, N = 4SE +/- 0.039545, N = 4SE +/- 0.027941, N = 3SE +/- 0.100570, N = 4SE +/- 0.098608, N = 9SE +/- 0.030886, N = 12SE +/- 0.035673, N = 12SE +/- 0.169130, N = 12SE +/- 0.020590, N = 4SE +/- 0.016241, N = 12SE +/- 0.050685, N = 12SE +/- 0.063041, N = 3SE +/- 0.050982, N = 3SE +/- 0.063263, N = 8SE +/- 0.096656, N = 3SE +/- 0.014474, N = 34.3762202.9260004.85400033.5460004.6937802.1645803.2673305.4175606.1365002.9155006.0578906.9306701.0188150.6498891.4535605.6871701.5022500.5271391.8670305.64789017.0529006.10925016.6610006.258110

SQLite

This is a simple benchmark of SQLite. At present this test profile just measures the time to perform a pre-defined number of insertions on an indexed database. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgSeconds, Fewer Is BetterSQLite 3.30.1Threads / Copies: 1XFSF2FSEXT4Btrfs306090120150SE +/- 0.02, N = 3SE +/- 2.68, N = 15SE +/- 0.02, N = 3SE +/- 0.69, N = 15SE +/- 0.14, N = 3SE +/- 0.16, N = 3SE +/- 0.12, N = 3SE +/- 5.38, N = 10SE +/- 0.08, N = 3SE +/- 0.13, N = 3SE +/- 0.12, N = 3SE +/- 0.68, N = 13SE +/- 0.13, N = 3SE +/- 0.71, N = 3SE +/- 0.24, N = 3SE +/- 6.10, N = 12SE +/- 0.01, N = 3SE +/- 0.29, N = 3SE +/- 0.17, N = 3SE +/- 3.42, N = 12SE +/- 0.02, N = 3SE +/- 0.52, N = 3SE +/- 0.06, N = 3SE +/- 0.83, N = 1532.8246.9332.3669.7143.1447.7142.28139.6546.3846.1740.3683.3038.9248.5841.00116.3936.4043.9237.3486.5435.3053.9036.0371.891. (CC) gcc options: -O2 -lz -lm -ldl -lpthread

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgSeconds, Fewer Is BetterSQLite 3.30.1Threads / Copies: 8XFSF2FSEXT4Btrfs120240360480600SE +/- 0.82, N = 3SE +/- 0.53, N = 3SE +/- 0.38, N = 3SE +/- 1.40, N = 3SE +/- 27.89, N = 9SE +/- 10.63, N = 6SE +/- 11.35, N = 9SE +/- 1.92, N = 3SE +/- 13.52, N = 10SE +/- 6.79, N = 3SE +/- 15.91, N = 9SE +/- 0.89, N = 3SE +/- 0.94, N = 3SE +/- 0.60, N = 3SE +/- 0.04, N = 3SE +/- 15.06, N = 6SE +/- 0.52, N = 3SE +/- 0.72, N = 3SE +/- 12.80, N = 9SE +/- 14.01, N = 9SE +/- 0.49, N = 3SE +/- 2.43, N = 6SE +/- 0.53, N = 3SE +/- 14.70, N = 984.47217.67118.04147.87332.68562.32398.34293.47221.80412.05308.02227.68107.19256.82133.85278.1588.49240.96317.24290.6983.04218.31121.72251.891. (CC) gcc options: -O2 -lz -lm -ldl -lpthread

Flexible IO Tester

Fio is an advanced disk benchmark that depends upon the kernel's AIO access library. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.16Type: Random Read - IO Engine: Linux AIO - Buffered: Yes - Direct: No - Block Size: 4KB - Disk Target: Default Test DirectoryXFSEXT4F2FSBtrfs2K4K6K8K10KSE +/- 33.33, N = 3SE +/- 14.81, N = 3SE +/- 11.89, N = 3SE +/- 17.95, N = 3SE +/- 19.60, N = 3SE +/- 33.33, N = 3SE +/- 7.84, N = 3SE +/- 25.08, N = 3SE +/- 47.77, N = 10SE +/- 33.33, N = 3SE +/- 25.79, N = 3SE +/- 66.67, N = 3SE +/- 93.63, N = 3SE +/- 33.33, N = 3SE +/- 141.18, N = 15SE +/- 5.51, N = 3SE +/- 86.52, N = 3SE +/- 11.20, N = 3SE +/- 6.81, N = 3SE +/- 33.33, N = 310500105339677816680527551103678315968575281033381441033374511033382259103743388458357104671. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -march=native -ll -lcurl -lssl -lcrypto -lnuma -libverbs -lrt -laio -lz -lm -lpthread -ldl

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.16Type: Random Write - IO Engine: Linux AIO - Buffered: Yes - Direct: No - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs40K80K120K160K200KSE +/- 536.45, N = 3SE +/- 173.21, N = 3SE +/- 352.77, N = 3SE +/- 1274.10, N = 3SE +/- 1249.00, N = 3SE +/- 1935.51, N = 12SE +/- 1432.20, N = 15SE +/- 666.67, N = 3SE +/- 1655.20, N = 15SE +/- 765.03, N = 9SE +/- 1335.89, N = 15SE +/- 1201.85, N = 3SE +/- 3679.91, N = 12SE +/- 512.35, N = 4SE +/- 887.57, N = 3SE +/- 305.51, N = 3SE +/- 1132.38, N = 4SE +/- 560.75, N = 3SE +/- 1036.88, N = 15SE +/- 881.92, N = 3SE +/- 2396.16, N = 15SE +/- 1452.97, N = 3SE +/- 1087.59, N = 15755335320074367693009960058817753271026671226678583393580115667725333655032767640008612562033682531040001656671355331606671322001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -march=native -ll -lcurl -lssl -lcrypto -lnuma -libverbs -lrt -laio -lz -lm -lpthread -ldl

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.16Type: Sequential Read - IO Engine: Linux AIO - Buffered: Yes - Direct: No - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs400800120016002000SE +/- 0.58, N = 3SE +/- 0.67, N = 3SE +/- 3.21, N = 3SE +/- 2.19, N = 3SE +/- 22.81, N = 3SE +/- 1.20, N = 3SE +/- 28.53, N = 15SE +/- 1.20, N = 3SE +/- 16.75, N = 3SE +/- 3.06, N = 3SE +/- 2.56, N = 6SE +/- 0.88, N = 3SE +/- 2.31, N = 3SE +/- 0.88, N = 3SE +/- 2.85, N = 3SE +/- 17.83, N = 12SE +/- 0.67, N = 3SE +/- 10.50, N = 35265225254571794178317681517185217671821154550450823352268664470298719071893173316601. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -march=native -ll -lcurl -lssl -lcrypto -lnuma -libverbs -lrt -laio -lz -lm -lpthread -ldl

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.16Type: Sequential Write - IO Engine: Linux AIO - Buffered: Yes - Direct: No - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs30060090012001500SE +/- 2.67, N = 3SE +/- 6.63, N = 15SE +/- 0.67, N = 3SE +/- 5.02, N = 5SE +/- 5.96, N = 15SE +/- 5.24, N = 3SE +/- 7.48, N = 15SE +/- 11.26, N = 3SE +/- 6.64, N = 3SE +/- 6.51, N = 15SE +/- 3.28, N = 3SE +/- 14.33, N = 3SE +/- 8.01, N = 3SE +/- 5.10, N = 15SE +/- 5.45, N = 15SE +/- 1.76, N = 3SE +/- 16.77, N = 3SE +/- 1.33, N = 3SE +/- 1.86, N = 3SE +/- 8.09, N = 3SE +/- 6.03, N = 3SE +/- 11.50, N = 3SE +/- 12.56, N = 935226133540552532033772860542742410191169167167375104230030174195783186412841. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -march=native -ll -lcurl -lssl -lcrypto -lnuma -libverbs -lrt -laio -lz -lm -lpthread -ldl

FS-Mark

FS_Mark is designed to test a system's file-system performance. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 1000 Files, 1MB SizeXFSF2FSEXT4Btrfs50100150200250SE +/- 1.20, N = 3SE +/- 6.76, N = 15SE +/- 0.43, N = 3SE +/- 1.47, N = 3SE +/- 6.27, N = 12SE +/- 1.74, N = 15SE +/- 0.91, N = 15SE +/- 5.50, N = 15SE +/- 4.39, N = 12SE +/- 1.64, N = 15SE +/- 1.12, N = 3SE +/- 2.03, N = 3SE +/- 1.95, N = 4SE +/- 1.67, N = 3SE +/- 0.44, N = 3SE +/- 6.08, N = 15SE +/- 0.38, N = 3SE +/- 0.33, N = 3SE +/- 0.23, N = 3SE +/- 2.02, N = 3SE +/- 0.81, N = 3SE +/- 1.72, N = 3SE +/- 0.65, N = 3SE +/- 2.32, N = 3185.4131.7171.9165.369.664.773.7110.299.4103.0129.2173.3140.8105.1136.999.0220.7180.799.5189.8231.9188.0210.5223.81. (CC) gcc options: -static

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 5000 Files, 1MB Size, 4 ThreadsXFSF2FSEXT4Btrfs130260390520650SE +/- 11.10, N = 12SE +/- 1.07, N = 3SE +/- 3.76, N = 14SE +/- 11.17, N = 15SE +/- 2.28, N = 12SE +/- 1.59, N = 12SE +/- 0.84, N = 3SE +/- 4.74, N = 15SE +/- 5.60, N = 12SE +/- 5.33, N = 9SE +/- 3.44, N = 15SE +/- 3.12, N = 3SE +/- 4.24, N = 12SE +/- 1.98, N = 3SE +/- 2.00, N = 12SE +/- 1.62, N = 3SE +/- 1.99, N = 7SE +/- 0.33, N = 3SE +/- 1.41, N = 3SE +/- 13.29, N = 15SE +/- 1.54, N = 3SE +/- 4.03, N = 5SE +/- 0.61, N = 3SE +/- 7.86, N = 15160.3180.0179.0178.890.092.6148.7188.8125.5127.0209.2204.4125.5151.6133.5195.2184.0244.9210.7221.7442.9304.2583.2282.51. (CC) gcc options: -static

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 4000 Files, 32 Sub Dirs, 1MB SizeXFSF2FSEXT4Btrfs50100150200250SE +/- 0.44, N = 3SE +/- 0.20, N = 3SE +/- 0.09, N = 3SE +/- 1.22, N = 3SE +/- 3.39, N = 15SE +/- 0.09, N = 3SE +/- 0.72, N = 7SE +/- 3.30, N = 15SE +/- 5.77, N = 15SE +/- 0.75, N = 8SE +/- 0.23, N = 3SE +/- 5.90, N = 15SE +/- 7.05, N = 12SE +/- 1.33, N = 15SE +/- 5.68, N = 15SE +/- 3.45, N = 14SE +/- 1.39, N = 14SE +/- 1.03, N = 3SE +/- 0.93, N = 15SE +/- 4.73, N = 15SE +/- 1.14, N = 3SE +/- 3.02, N = 15SE +/- 0.60, N = 3SE +/- 5.80, N = 1584.4128.686.5161.942.658.963.593.573.075.874.2117.889.2108.986.3103.1106.7177.698.2110.9230.4176.1209.0124.31. (CC) gcc options: -static

IOR

IOR is a parallel I/O storage benchmark. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgMB/s, More Is BetterIOR 3.2.1Write TestXFSF2FSEXT4Btrfs50100150200250SE +/- 0.78, N = 3SE +/- 1.97, N = 4SE +/- 0.28, N = 3SE +/- 0.91, N = 3SE +/- 0.92, N = 15SE +/- 1.29, N = 15SE +/- 0.62, N = 8SE +/- 1.37, N = 3SE +/- 1.31, N = 15SE +/- 0.78, N = 11SE +/- 0.33, N = 3SE +/- 0.65, N = 3SE +/- 0.62, N = 3SE +/- 8.84, N = 15SE +/- 0.37, N = 3SE +/- 1.50, N = 3SE +/- 0.63, N = 3SE +/- 0.70, N = 3SE +/- 0.53, N = 3SE +/- 1.59, N = 3SE +/- 0.44, N = 3SE +/- 1.13, N = 3SE +/- 0.95, N = 3SE +/- 1.56, N = 3189.28134.7190.00176.7155.0972.9862.16104.6766.4986.0368.9992.79168.79164.7780.51157.62185.84174.5691.34197.11196.62167.74184.17239.161. (CC) gcc options: -O2 -lm -pthread -lmpi

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgMB/s, More Is BetterIOR 3.2.1Read TestXFSF2FSEXT4Btrfs140280420560700SE +/- 0.43, N = 3SE +/- 6.45, N = 4SE +/- 1.12, N = 3SE +/- 0.93, N = 3SE +/- 8.69, N = 15SE +/- 17.95, N = 15SE +/- 2.01, N = 8SE +/- 9.91, N = 3SE +/- 9.42, N = 15SE +/- 1.54, N = 11SE +/- 0.84, N = 3SE +/- 22.70, N = 3SE +/- 0.35, N = 3SE +/- 4.95, N = 15SE +/- 1.12, N = 3SE +/- 14.92, N = 3SE +/- 1.27, N = 3SE +/- 1.64, N = 3SE +/- 8.71, N = 3SE +/- 5.60, N = 3SE +/- 0.39, N = 3SE +/- 1.69, N = 3SE +/- 1.62, N = 3SE +/- 4.52, N = 3396.46386.43377.69343.45355.75336.81362.44513.75369.78452.46369.20490.12386.08386.14373.21297.90392.51432.59349.95500.32417.31458.05388.52657.361. (CC) gcc options: -O2 -lm -pthread -lmpi

Compile Bench

Compilebench tries to age a filesystem by simulating some of the disk IO common in creating, compiling, patching, stating and reading kernel trees. It indirectly measures how well filesystems can maintain directory locality as the disk fills up and directories age. This current test is setup to use the makej mode with 10 initial directories Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgMB/s, More Is BetterCompile Bench 0.6Test: Initial CreateXFSF2FSEXT4Btrfs80160240320400SE +/- 1.46, N = 3SE +/- 3.87, N = 15SE +/- 1.14, N = 3SE +/- 2.04, N = 3SE +/- 2.63, N = 3SE +/- 2.98, N = 15SE +/- 3.93, N = 3SE +/- 3.24, N = 3SE +/- 4.01, N = 3SE +/- 3.75, N = 3SE +/- 1.06, N = 3SE +/- 1.41, N = 3SE +/- 1.60, N = 3SE +/- 3.52, N = 12SE +/- 1.64, N = 3SE +/- 2.62, N = 10SE +/- 2.83, N = 3SE +/- 2.69, N = 15SE +/- 0.20, N = 3SE +/- 4.58, N = 3SE +/- 2.39, N = 3SE +/- 5.10, N = 3SE +/- 6.21, N = 3SE +/- 3.53, N = 6304.76257.99369.62214.67305.49218.48367.37291.59305.02252.31367.20289.64296.03204.32358.08281.28304.57261.51369.26281.34319.57329.96362.18292.01

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

SingleRAID6RAID5RAID1RAID10RAID0OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 12.0Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteXFSF2FSEXT4Btrfs14002800420056007000SE +/- 356.17, N = 9SE +/- 41.82, N = 3SE +/- 61.03, N = 3SE +/- 251.33, N = 6SE +/- 28.50, N = 9SE +/- 6.06, N = 3SE +/- 24.93, N = 3SE +/- 60.68, N = 9SE +/- 114.01, N = 9SE +/- 91.08, N = 9SE +/- 150.35, N = 9SE +/- 52.03, N = 3SE +/- 26.90, N = 3SE +/- 50.59, N = 3SE +/- 26.43, N = 3SE +/- 86.05, N = 9SE +/- 193.53, N = 6SE +/- 186.03, N = 9SE +/- 73.63, N = 9SE +/- 46.64, N = 9SE +/- 812.21, N = 9SE +/- 409.58, N = 6SE +/- 84.80, N = 5SE +/- 70.65, N = 94691.474961.484877.473281.912079.273235.982174.393188.282625.423609.472681.123232.323691.183489.692433.652873.474654.444328.782639.033068.926003.795840.856514.514509.811. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Single: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 3 January 2020 19:28 by user root.

Single: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 3 January 2020 11:31 by user root.

Single: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 3 January 2020 15:19 by user root.

Single: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 4 January 2020 06:55 by user root.

RAID0: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID0
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 4 January 2020 10:42 by user root.

RAID0: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=512 / raid0 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 6 January 2020 06:52 by user root.

RAID0: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid0 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 6 January 2020 14:42 by user root.

RAID0: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=4096 / raid0 sde[3] sdb[0] sdc[1] sdd[2]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 6 January 2020 10:44 by user root.

RAID1: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID1
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 4 January 2020 17:58 by user root.

RAID1: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw / raid1 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 6 January 2020 20:14 by user root.

RAID1: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid1 sdb[0] sdc[2] sdd[3] sdn[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 7 January 2020 11:52 by user root.

RAID1: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw / raid1 sdb[0] sdc[2] sdd[3] sdn[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 7 January 2020 06:18 by user root.

RAID5: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID5
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 5 January 2020 08:04 by user root.

RAID5: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=384 / raid5 sde[4] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 7 January 2020 19:27 by user root.

RAID5: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid5 sde[4] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 8 January 2020 12:43 by user root.

RAID5: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=3072 / raid5 sde[4] sdd[2] sdb[0] sdc[1]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 8 January 2020 06:20 by user root.

RAID6: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID6
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 5 January 2020 12:55 by user root.

RAID6: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=256 / raid6 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 8 January 2020 19:03 by user root.

RAID6: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid6 sdd[2] sde[3] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 9 January 2020 19:05 by user root.

RAID6: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid6 sde[3] sdc[1] sdd[2] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 9 January 2020 06:40 by user root.

RAID10: Btrfs

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: btrfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: MQ-DEADLINE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5 / RAID10
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 5 January 2020 18:34 by user root.

RAID10: EXT4

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: ext4

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / relatime,rw,stripe=256 / raid10 sde[3] sdd[2] sdc[1] sdb[0]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 10 January 2020 07:19 by user root.

RAID10: F2FS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: f2fs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr / raid10 sdd[1] sde[2] sdc[0] sdb[3]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 11 January 2020 07:00 by user root.

RAID10: XFS

Processor: 2 x AMD EPYC 7601 32-Core (64 Cores / 128 Threads), Motherboard: Dell 02MJ3T (1.2.5 BIOS), Chipset: AMD 17h, Memory: 16 x 32 GB DDR4-2666MT/s 36ASF4G72PZ-2G6D2, Disk: 280GB INTEL SSDPED1D280GA + 13 x 500GB Samsung SSD 860 + 120GB SSDSCKJB120G7R, Graphics: Matrox G200eW3, Network: 2 x Broadcom BCM57416 NetXtreme-E Dual-Media 10G RDMA + 2 x Broadcom NetXtreme BCM5720 2-port PCIe

OS: Ubuntu 19.10, Kernel: 5.5.0-999-generic (x86_64) 20191231, Desktop: GNOME Shell 3.34.1, Display Server: X Server, Compiler: GCC 9.2.1 20191008, File-System: xfs

Compiler Notes: --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-bootstrap --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-offload-targets=nvptx-none,hsa --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib=auto --with-tune=generic --without-cuda-driver -v
Disk Notes: NONE / attr2,inode64,logbsize=32k,logbufs=8,noquota,relatime,rw,sunit=1024,swidth=2048 / raid10 sdb[0] sdd[2] sdc[1] sdh[3]
Processor Notes: CPU Microcode: 0x8001227
Python Notes: Python 2.7.17rc1 + Python 3.7.5rc1
Security Notes: itlb_multihit: Not affected + l1tf: Not affected + mds: Not affected + meltdown: Not affected + spec_store_bypass: Mitigation of SSB disabled via prctl and seccomp + spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization + spectre_v2: Mitigation of Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + tsx_async_abort: Not affected

Testing initiated at 10 January 2020 17:16 by user root.