Linux 4.21 File-System Benchmarks

Linux 4.21 file-system benchmarks by Michael Larabel for a future article on Phoronix.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1901053-SP-LINUX421F77
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs
On Line Graphs With Missing Data, Connect The Line Gaps

Multi-Way Comparison

Condense Comparison
Transpose Comparison

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
NVMe SSD: Btrfs
January 05 2019
  2 Hours, 53 Minutes
NVMe SSD: EXT4
January 04 2019
  2 Hours, 6 Minutes
NVMe SSD: F2FS
January 04 2019
  2 Hours, 14 Minutes
NVMe SSD: XFS
January 04 2019
  2 Hours, 13 Minutes
SATA 3.0 SSD: Btrfs
January 03 2019
  2 Hours, 57 Minutes
SATA 3.0 SSD: EXT4
January 03 2019
  1 Hour, 24 Minutes
SATA 3.0 SSD: F2FS
January 04 2019
  1 Hour, 38 Minutes
SATA 3.0 SSD: XFS
January 03 2019
  1 Hour, 33 Minutes
USB 3.0 SSD: Btrfs
January 04 2019
  43 Minutes
USB 3.0 SSD: EXT4
January 04 2019
  1 Hour, 31 Minutes
USB 3.0 SSD: F2FS
January 04 2019
  1 Hour, 51 Minutes
USB 3.0 SSD: XFS
January 04 2019
  2 Hours, 13 Minutes
Invert Behavior (Only Show Selected Data)
  1 Hour, 56 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):


ProcessorMotherboardChipsetMemoryDiskGraphicsAudioMonitorNetworkOSKernelDesktopDisplay ServerOpenGLVulkanCompilerFile-SystemScreen ResolutionNVMe SSDSATA 3.0 SSDUSB 3.0 SSD Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFSAMD Ryzen Threadripper 2990WX 32-Core @ 3.00GHz (32 Cores / 64 Threads)ASUS ROG ZENITH EXTREME (1601 BIOS)AMD Family 17h4 x 8192 MB DDR4-3200MT/s F4-3200C14-8GFXSamsung SSD 970 EVO 500GB + 280GB INTEL SSDPE21D280GAAMD Radeon RX 64 8GB (1630/945MHz)Realtek ALC1220ASUS VP28UIntel I211 + Qualcomm Atheros QCA6174 802.11ac WirelessUbuntu 19.044.20.0-999-generic (x86_64) 20190102GNOME Shell 3.30.1X Server4.5 Mesa 18.2.6 (LLVM 7.0.1)1.1.70GCC 8.2.0btrfs3840x2160280GB INTEL SSDPE21D280GA + Samsung SSD 970 EVO 500GBext4Samsung SSD 970 EVO 500GB + 280GB INTEL SSDPE21D280GAf2fsxfs256GB Samsung SSD 850 + Samsung SSD 970 EVO 500GBbtrfsext4f2fsxfs256GB 2115 + Samsung SSD 970 EVO 500GBbtrfsext4f2fsxfsOpenBenchmarking.orgCompiler Details- --build=x86_64-linux-gnu --disable-vtable-verify --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --enable-libmpx --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc=auto --enable-offload-targets=nvptx-none --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --program-prefix=x86_64-linux-gnu- --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-multilib-list=m32,m64,mx32 --with-target-system-zlib --with-tune=generic --without-cuda-driver -v Disk Details- NVMe SSD: Btrfs: NONE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5- NVMe SSD: EXT4: NONE / relatime,rw- NVMe SSD: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr- NVMe SSD: XFS: NONE / attr2,inode64,noquota,relatime,rw- SATA 3.0 SSD: Btrfs: NONE / relatime,rw,space_cache,ssd,subvol=/,subvolid=5- SATA 3.0 SSD: EXT4: NONE / relatime,rw- SATA 3.0 SSD: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr- SATA 3.0 SSD: XFS: NONE / attr2,inode64,noquota,relatime,rw- USB 3.0 SSD: Btrfs: NONE / relatime,rw,space_cache,subvol=/,subvolid=5- USB 3.0 SSD: EXT4: NONE / relatime,rw,stripe=8191- USB 3.0 SSD: F2FS: NONE / acl,active_logs=6,alloc_mode=default,background_gc=on,discard,extent_cache,flush_merge,fsync_mode=posix,inline_data,inline_dentry,inline_xattr,lazytime,mode=adaptive,no_heap,relatime,rw,user_xattr- USB 3.0 SSD: XFS: NONE / attr2,inode64,noquota,relatime,rwProcessor Details- Scaling Governor: acpi-cpufreq ondemandPython Details- Python 2.7.15+ + Python 3.7.2rc1Security Details- __user pointer sanitization + Full AMD retpoline IBPB: conditional STIBP: disabled RSB filling + SSB disabled via prctl and seccomp

startup-time: Only Seq Reads - xterm - Default Test Directorystartup-time: Seq Reads + Writes - xterm - Default Test Directorystartup-time: Only Seq Reads - GNOME Terminal - Default Test Directorystartup-time: Only Seq Reads - LibreOffice Writer - Default Test Directorystartup-time: Seq Reads + Writes - GNOME Terminal - Default Test Directorystartup-time: Seq Reads + Writes - LibreOffice Writer - Default Test Directorycompilebench: Initial Createfio: Rand Read - Linux AIO - No - Yes - 2MB - Default Test Directoryfio: Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Rand Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Rand Write - Linux AIO - No - Yes - 2MB - Default Test Directoryfio: Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Rand Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Seq Read - Linux AIO - No - Yes - 2MB - Default Test Directoryfio: Seq Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Seq Read - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Seq Write - Linux AIO - No - Yes - 2MB - Default Test Directoryfio: Seq Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfio: Seq Write - Linux AIO - No - Yes - 4KB - Default Test Directoryfs-mark: 1000 Files, 1MB Sizefs-mark: 5000 Files, 1MB Size, 4 Threadsfs-mark: 4000 Files, 32 Sub Dirs, 1MB Sizepgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writesqlite: Timed SQLite InsertionsNVMe SSDSATA 3.0 SSDUSB 3.0 SSD Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS Btrfs EXT4 F2FS XFS0.540.332.931.231.030.952462613532136000206129375050892528135250212022657878657.201383640425673223616.490.540.722.081.373.021.9752625101030263333199110122590002513111028400019911010258667726.591185706440339448422.050.350.341.030.761.030.69498258610502690002162930238000258210742746672151949243000882.901157825433455417952.010.530.662.001.382.951.7442225901089278583213410002560002591107727566721451046267667948.651547930421938440677.947.0324.3315.4521.0114.1420753737395600504234598923843749566750124161750157255155429268492785.092.101.489.236.466.614.7550953637796600518355908335083779646751835591000158312157441150854838.351.831.285.613.794.052.7933353637896700519357914675093779660051935691233214338213425431941045.792.171.349.256.495.854.2341653537696300518347887005093759610051832482792169272165429427873736.174191403573335.835.393121363466735.5815.4735.30165.512.741.3111.978.425.534.175184191403593341391.80235674191503830041492.0023533147275145422294679642.672.211.267.324.994.012.762754191423646740915238933419150383004141523883319222919143920782351.802.791.3111.958.435.584.21420419141360334141473754541914136083414144.8436958152215141429222636539.02OpenBenchmarking.org

Application Start-up Time

This benchmark measures the start-up time of applications when there is some I/O in the background. Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: xterm - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs246810SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.01, N = 3SE +/- 0.18, N = 9SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.19, N = 92.792.212.742.171.832.107.940.530.350.540.54

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: xterm - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs246810SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.02, N = 5SE +/- 0.01, N = 3SE +/- 0.14, N = 9SE +/- 0.04, N = 9SE +/- 0.01, N = 9SE +/- 0.03, N = 8SE +/- 0.00, N = 31.311.261.311.341.281.487.030.660.340.720.33

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: GNOME Terminal - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs612182430SE +/- 0.01, N = 3SE +/- 0.07, N = 3SE +/- 0.03, N = 3SE +/- 0.11, N = 3SE +/- 0.05, N = 3SE +/- 0.08, N = 3SE +/- 0.40, N = 4SE +/- 0.03, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.37, N = 911.957.3211.979.255.619.2324.332.001.032.082.93

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Only Sequential Reads - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs48121620SE +/- 0.02, N = 3SE +/- 0.04, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.01, N = 3SE +/- 0.03, N = 3SE +/- 0.23, N = 9SE +/- 0.02, N = 4SE +/- 0.01, N = 3SE +/- 0.02, N = 9SE +/- 0.19, N = 98.434.998.426.493.796.4615.451.380.761.371.23

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: GNOME Terminal - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs510152025SE +/- 0.04, N = 3SE +/- 0.07, N = 4SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.06, N = 4SE +/- 0.02, N = 3SE +/- 0.35, N = 4SE +/- 0.19, N = 9SE +/- 0.03, N = 9SE +/- 0.08, N = 9SE +/- 0.11, N = 95.584.015.535.854.056.6121.012.951.033.021.03

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgsec, Fewer Is BetterApplication Start-up Time 2.4.0Background I/O Mix: Sequential Reads + Writes - Application To Start: LibreOffice Writer - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs48121620SE +/- 0.00, N = 3SE +/- 0.04, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.17, N = 3SE +/- 0.10, N = 9SE +/- 0.02, N = 9SE +/- 0.10, N = 6SE +/- 0.09, N = 94.212.764.174.232.794.7514.141.740.691.970.95

Compile Bench

Compilebench tries to age a filesystem by simulating some of the disk IO common in creating, compiling, patching, stating and reading kernel trees. It indirectly measures how well filesystems can maintain directory locality as the disk fills up and directories age. This current test is setup to use the makej mode with 10 initial directories Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterCompile Bench 0.6Test: Initial CreateXFSF2FSEXT4Btrfs110220330440550SE +/- 6.09, N = 3SE +/- 21.36, N = 9SE +/- 5.30, N = 3SE +/- 3.38, N = 3SE +/- 5.11, N = 12SE +/- 1.61, N = 3SE +/- 4.03, N = 12SE +/- 3.36, N = 3SE +/- 0.71, N = 3SE +/- 0.82, N = 3SE +/- 3.04, N = 12420275518416333509207422498526246

Flexible IO Tester

Fio is an advanced disk benchmark that depends upon the kernel's AIO access library. Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs6001200180024003000SE +/- 0.33, N = 3SE +/- 1.53, N = 341941941941953553653653725902586251026131. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs2004006008001000SE +/- 1.15, N = 3SE +/- 1.83, N = 6SE +/- 0.33, N = 3SE +/- 0.88, N = 3SE +/- 27.73, N = 12SE +/- 2.33, N = 3SE +/- 5.90, N = 31411421401403763783773731089105010305321. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Random Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs60K120K180K240K300KSE +/- 290.59, N = 3SE +/- 33.33, N = 3SE +/- 466.67, N = 6SE +/- 88.19, N = 3SE +/- 173.21, N = 3SE +/- 7088.68, N = 12SE +/- 666.67, N = 3SE +/- 1527.53, N = 336033364673593335733963009670096600956002785832690002633331360001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs5001000150020002500SE +/- 5.00, N = 3SE +/- 0.52, N = 3SE +/- 0.33, N = 3SE +/- 2.33, N = 3SE +/- 4.67, N = 3SE +/- 28.54, N = 3SE +/- 4.36, N = 3SE +/- 4.04, N = 3414.00409.00413.0035.83518.00519.00518.00504.002134.002162.001991.002061.001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs2004006008001000SE +/- 4.44, N = 11SE +/- 0.33, N = 3SE +/- 0.40, N = 3SE +/- 0.07, N = 7SE +/- 0.08, N = 4SE +/- 0.30, N = 12SE +/- 0.67, N = 3SE +/- 15.63, N = 12SE +/- 12.98, N = 3SE +/- 4.51, N = 3SE +/- 6.94, N = 3SE +/- 5.02, N = 4147.00152.0091.805.395.134.36347.00357.00355.00234.001000.00930.001012.00293.001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Random Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs60K120K180K240K300KSE +/- 1127.46, N = 11SE +/- 66.67, N = 3SE +/- 33.33, N = 3SE +/- 33.33, N = 3SE +/- 185.59, N = 3SE +/- 3992.03, N = 12SE +/- 3214.55, N = 3SE +/- 1000.00, N = 3SE +/- 1732.05, N = 3SE +/- 1242.65, N = 437545389332356788700914679083359892256000238000259000750501. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs6001200180024003000SE +/- 0.58, N = 3SE +/- 0.33, N = 3SE +/- 18.49, N = 124194194193125095095083842591258225138921. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs2004006008001000SE +/- 5.89, N = 12SE +/- 6.84, N = 9SE +/- 0.33, N = 3SE +/- 11.72, N = 3SE +/- 21.67, N = 3SE +/- 12.77, N = 3SE +/- 8.05, N = 41411501501363753773773741077107411105281. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Sequential Read - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs60K120K180K240K300KSE +/- 1503.17, N = 12SE +/- 1767.69, N = 9SE +/- 33.33, N = 3SE +/- 88.19, N = 3SE +/- 2848.00, N = 3SE +/- 5487.36, N = 3SE +/- 3055.05, N = 3SE +/- 2136.00, N = 436083383003830034667961009660096467956672756672746672840001352501. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 2MB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs5001000150020002500SE +/- 0.58, N = 3SE +/- 0.60, N = 4SE +/- 2.19, N = 3SE +/- 1.33, N = 3SE +/- 21.46, N = 3SE +/- 2.40, N = 3SE +/- 6.89, N = 3414.00414.00414.0035.58518.00519.00518.00501.002145.002151.001991.002120.001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgMB/s, More Is BetterFlexible IO Tester 3.1Type: Sequential Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs2004006008001000SE +/- 5.13, N = 12SE +/- 0.10, N = 3SE +/- 0.82, N = 12SE +/- 1.00, N = 12SE +/- 0.07, N = 3SE +/- 8.95, N = 12SE +/- 0.67, N = 3SE +/- 0.88, N = 3SE +/- 13.61, N = 12SE +/- 13.20, N = 3SE +/- 9.71, N = 3SE +/- 14.77, N = 3SE +/- 7.72, N = 9144.84152.0092.0015.4714.5814.37324.00356.00355.00241.001046.00949.001010.00226.001. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgIOPS, More Is BetterFlexible IO Tester 3.1Type: Sequential Write - IO Engine: Linux AIO - Buffered: No - Direct: Yes - Block Size: 4KB - Disk Target: Default Test DirectoryXFSF2FSEXT4Btrfs60K120K180K240K300KSE +/- 1292.49, N = 12SE +/- 33.33, N = 3SE +/- 33.33, N = 3SE +/- 2289.32, N = 12SE +/- 166.67, N = 3SE +/- 173.21, N = 3SE +/- 3481.39, N = 12SE +/- 3179.80, N = 3SE +/- 2516.61, N = 3SE +/- 3844.19, N = 3SE +/- 1954.54, N = 936958388332353382792912339100061750267667243000258667578781. (CC) gcc options: -rdynamic -std=gnu99 -ffast-math -include -O3 -U_FORTIFY_SOURCE -lgfapi -lglusterfs -lrt -laio -lz -lm -lpthread -ldl

FS-Mark

FS_Mark is designed to test a system's file-system performance. Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 1000 Files, 1MB SizeXFSF2FSEXT4Btrfs2004006008001000SE +/- 2.42, N = 12SE +/- 0.99, N = 3SE +/- 0.15, N = 3SE +/- 0.58, N = 12SE +/- 0.72, N = 3SE +/- 0.43, N = 3SE +/- 0.20, N = 3SE +/- 0.32, N = 3SE +/- 15.28, N = 4SE +/- 15.30, N = 3SE +/- 11.02, N = 12SE +/- 4.56, N = 3152.00192.00147.0035.30169.00214.00158.00157.00948.65882.90726.59657.201. (CC) gcc options: -static

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 5000 Files, 1MB Size, 4 ThreadsXFSF2FSEXT4Btrfs30060090012001500SE +/- 2.33, N = 12SE +/- 0.35, N = 3SE +/- 0.13, N = 3SE +/- 2.66, N = 3SE +/- 1.27, N = 3SE +/- 0.61, N = 3SE +/- 0.81, N = 3SE +/- 8.10, N = 2SE +/- 16.16, N = 6SE +/- 7.69, N = 3SE +/- 15.10, N = 1021522927527233831225515471157118513831. (CC) gcc options: -static

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgFiles/s, More Is BetterFS-Mark 3.3Test: 4000 Files, 32 Sub Dirs, 1MB SizeXFSF2FSEXT4Btrfs2004006008001000SE +/- 1.77, N = 3SE +/- 0.87, N = 3SE +/- 0.41, N = 3SE +/- 0.60, N = 3SE +/- 0.30, N = 3SE +/- 0.35, N = 3SE +/- 0.90, N = 3SE +/- 12.12, N = 3SE +/- 18.90, N = 12SE +/- 11.31, N = 3SE +/- 9.48, N = 31411911451652131571559308257066401. (CC) gcc options: -static

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyXFSF2FSEXT4Btrfs90K180K270K360K450KSE +/- 1100.50, N = 3SE +/- 8594.94, N = 3SE +/- 2645.53, N = 3SE +/- 3761.27, N = 3SE +/- 3275.14, N = 3SE +/- 6393.26, N = 3SE +/- 6418.33, N = 3SE +/- 2562.12, N = 3SE +/- 1219.40, N = 3SE +/- 2846.13, N = 3SE +/- 2516.66, N = 34292224392074222944294274254314411504292684219384334554403394256731. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteXFSF2FSEXT4Btrfs10K20K30K40K50KSE +/- 23.13, N = 3SE +/- 3.87, N = 3SE +/- 21.87, N = 3SE +/- 34.48, N = 3SE +/- 41.54, N = 3SE +/- 37.85, N = 3SE +/- 20.03, N = 3SE +/- 432.28, N = 3SE +/- 417.84, N = 12SE +/- 293.09, N = 3SE +/- 136.27, N = 3636582367968737941085484927440674179544842223611. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

SQLite

This is a simple benchmark of SQLite. At present this test profile just measures the time to perform a pre-defined number of insertions on an indexed database. Learn more via the OpenBenchmarking.org test page.

USB 3.0 SSDSATA 3.0 SSDNVMe SSDOpenBenchmarking.orgSeconds, Fewer Is BetterSQLite 3.22Timed SQLite InsertionsXFSF2FSEXT4Btrfs4080120160200SE +/- 0.12, N = 3SE +/- 0.09, N = 3SE +/- 0.77, N = 3SE +/- 2.30, N = 3SE +/- 0.06, N = 3SE +/- 0.27, N = 3SE +/- 0.17, N = 3SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.05, N = 339.0251.8042.67165.5136.1745.7938.3585.092.012.056.491. (CC) gcc options: -O2 -lz -ldl -lpthread