Raspberry Pi vs Orange Pi vs Banana Pi 2016-03 Showdown by LoveRPi

Debian 9 with Linux 4.4 on VS-RD-RK3399

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1709271-TY-1704029RI26
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results
Show Result Confidence Charts
Allow Limiting Results To Certain Suite(s)

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Toggle/Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
Orange Pi One on Armbian
March 30 2016
 
Orange Pi PC on Armbian
March 30 2016
 
Orange Pi Plus on Armbian
March 30 2016
 
Raspberry Pi 2 on Raspbian
January 06 2016
 
Raspberry Pi 3 on Raspbian
March 29 2016
 
Banana Pi M2 by LoveRPi
March 30 2016
 
Banana Pi M3 by LoveRPi
March 30 2016
 
Banana Pi M2+ SinoVoip
April 07 2016
 
Banana Pi M2+ on Armbian
April 07 2016
 
Banana Pi M2+ Raspbian 8.0
April 08 2016
 
MiQi on Lubuntu 14.04
April 20 2016
 
DragonBoard 410c on Debian RPB 16.03
May 06 2016
 
MeUbuntu 14.04.3
May 22 2016
 
NanoPi NEO 512MB No Heatsink
July 21 2016
 
NanoPi NEO 512MB Heatsink
July 21 2016
 
NanoPi NEO 512MB Heatsink 2
July 22 2016
 
NanoPi NEO 512MB Heatsink2
July 22 2016
 
NanoPi NEO 2 FA Ubuntu 16.04.2
April 01 2017
 
NanoPi NEO 2 Armbian Ubuntu 16.04.2
April 01 2017
 
VS-RK3399 Board - Debian 9
September 27 2017
 
Invert Behavior (Only Show Selected Data)
 

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

Orange Pi One on Armbian

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 494MB, Disk: 32GB 00000

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Orange Pi PC on Armbian

Changed Processor to ARMv7 rev 5 @ 1.30GHz (4 Cores).

Changed Memory to 1024MB.

Orange Pi Plus on Armbian

Changed Disk to 32GB 00000 + 8GB M8G1GC.

Raspberry Pi 2 on Raspbian

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Raspberry Pi 3 on Raspbian

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 63GB 00000

OS: Raspbian GNU/Linux 8, Kernel: 4.1.20-v7+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Banana Pi M2 by LoveRPi

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Sinovoip BPI-M2, Memory: 1024MB, Disk: 129GB 00000

OS: Ubuntu 14.04, Kernel: 4.4.1-sunxi (armv7l), Compiler: GCC 4.8.4, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Banana Pi M3 by LoveRPi

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 8GB M8G1GC + 129GB TO

OS: Ubuntu 15.10, Kernel: 3.4.39-BPI-M3-aufs (armv7l), Compiler: GCC 5.2.1 20151010, File-System: aufs, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: sunxi-iks interactive

Banana Pi M2+ SinoVoip

Processor: ARMv7 rev 5 @ 1.20GHz (1 Core), Motherboard: sun8i, Memory: 745MB, Disk: 64GB 00000 + 8GB 8WMB3R

OS: Debian 8.4, Kernel: 3.4.111-sun8i (armv7l), Desktop: Xfce, Display Driver: modesetting 0.9.0, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Banana Pi M2+ on Armbian

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 745MB, Disk: 64GB 00000 + 8GB 8WMB3R

OS: Debian 8.4, Kernel: 3.4.111-sun8i (armv7l), Desktop: Xfce, Display Driver: modesetting 0.9.0, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Banana Pi M2+ Raspbian 8.0

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G + 8GB 8WMB3R

OS: Raspbian 8.0, Kernel: 3.4.39-02-lobo (armv7l), Desktop: LXDE, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

MiQi on Lubuntu 14.04

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip RK3288 (Flattened Device Tree), Memory: 2048MB, Disk: 31GB BIWIN

OS: Ubuntu 14.04, Kernel: 3.10.0 (armv7l), Desktop: LXDE, Compiler: GCC 4.8.4, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: rockchip interactive

DragonBoard 410c on Debian RPB 16.03

Processor: Unknown @ 1.21GHz (4 Cores), Memory: 833MB, Disk: 8GB DS2008, Monitor: TX-NR636

OS: Debian 8.3, Kernel: 4.4.0-104-arm64 (aarch64), Desktop: LXDE, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-libsanitizer --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=arm64 -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

MeUbuntu 14.04.3

Processor: Intel Atom Z3735F @ 1.83GHz (4 Cores), Motherboard: Mini PC v2.80, Chipset: Intel ValleyView SSA-CUnit, Memory: 2048MB, Disk: 31GB NCard, Graphics: Intel ValleyView Gen7 (646MHz), Monitor: TX-NR636

OS: Ubuntu 14.04, Kernel: 3.16.0-45-generic (x86_64), Desktop: Unity 7.2.6, Display Driver: intel 2.99.914, Compiler: GCC 4.8.4, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-libmudflap --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

NanoPi NEO 512MB No Heatsink

Processor: ARMv7 rev 5 @ 0.82GHz (4 Cores), Motherboard: sun8i, Memory: 495MB, Disk: 8GB SL08G

OS: Ubuntu 15.10, Kernel: 3.4.39-h3 (armv7l), Compiler: GCC 5.2.1 20151010, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

NanoPi NEO 512MB Heatsink

NanoPi NEO 512MB Heatsink 2

NanoPi NEO 512MB Heatsink2

Changed Processor to ARMv7 rev 5 @ 1.20GHz (4 Cores).

NanoPi NEO 2 FA Ubuntu 16.04.2

Processor: AArch64 rev 4 @ 0.82GHz (4 Cores), Motherboard: sun50iw2, Memory: 468MB, Disk: 8GB SL08G

OS: Ubuntu 16.04, Kernel: 3.10.65 (aarch64), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

NanoPi NEO 2 Armbian Ubuntu 16.04.2

Processor: AArch64 rev 4 (4 Cores), Motherboard: Xunlong Orange Pi PC 2, Memory: 483MB, Disk: 8GB SL08G

OS: Ubuntu 16.04, Kernel: 4.10.0-sun50iw2 (aarch64), Compiler: GCC 5.4.0 20160609, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v

VS-RK3399 Board - Debian 9

Processor: ARMv8 rev 4 @ 1.42GHz (6 Cores), Motherboard: Rockchip RK3399 VideoStrong Board MID (Android), Memory: 4096MB, Disk: 31GB BWBD3R, Monitor: TX-NR636

OS: Debian 9.1, Kernel: 4.4.55 (aarch64), Desktop: LXDE, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x600p86

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Raspberry Pi vs Orange Pi vs Banana Pi 2016-03 Showdown by LoveRPiProcessorMotherboardMemoryDiskMonitorChipsetGraphicsOSKernelCompilerFile-SystemScreen ResolutionDesktopDisplay ServerDisplay DriverOrange Pi One on ArmbianOrange Pi PC on ArmbianOrange Pi Plus on ArmbianRaspberry Pi 2 on RaspbianRaspberry Pi 3 on RaspbianBanana Pi M2 by LoveRPiBanana Pi M3 by LoveRPiBanana Pi M2+ SinoVoipBanana Pi M2+ on ArmbianBanana Pi M2+ Raspbian 8.0MiQi on Lubuntu 14.04DragonBoard 410c on Debian RPB 16.03MeUbuntu 14.04.3NanoPi NEO 512MB No HeatsinkNanoPi NEO 512MB HeatsinkNanoPi NEO 512MB Heatsink 2NanoPi NEO 512MB Heatsink2NanoPi NEO 2 FA Ubuntu 16.04.2NanoPi NEO 2 Armbian Ubuntu 16.04.2VS-RK3399 Board - Debian 9ARMv7 rev 5 @ 1.20GHz (4 Cores)sun8i494MB32GB 00000Debian 8.33.4.110-sun8i (armv7l)GCC 4.9.2ext41280x1440ARMv7 rev 5 @ 1.30GHz (4 Cores)1024MB32GB 00000 + 8GB M8G1GCARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2709 Raspberry Pi 2 Model B Rev 1.1925MB8GB SDRaspbian 8.04.1.13-v7+ (armv7l)LXDE 0.7.2X Server 1.16.41824x984ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2709 Raspberry Pi 3 Model B Rev 1.263GB 00000Raspbian GNU/Linux 84.1.20-v7+ (armv7l)ARMv7 rev 3 @ 1.01GHz (4 Cores)Allwinner sun6i (A31) Family Sinovoip BPI-M21024MB129GB 00000Ubuntu 14.044.4.1-sunxi (armv7l)GCC 4.8.4ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i2048MB8GB M8G1GC + 129GB TOUbuntu 15.103.4.39-BPI-M3-aufs (armv7l)GCC 5.2.1 20151010aufs1920x2160ARMv7 rev 5 @ 1.20GHz (1 Core)745MB64GB 00000 + 8GB 8WMB3RDebian 8.43.4.111-sun8i (armv7l)Xfcemodesetting 0.9.0GCC 4.9.2ext41280x720ARMv7 rev 5 @ 1.20GHz (4 Cores)1920x1080ARMv7 rev 5 @ 1.20GHz (3 Cores)1024MB8GB SU08G + 8GB 8WMB3RRaspbian 8.03.4.39-02-lobo (armv7l)LXDE1280x720ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip RK3288 (Flattened Device Tree)2048MB31GB BIWINUbuntu 14.043.10.0 (armv7l)GCC 4.8.41920x1080Unknown @ 1.21GHz (4 Cores)833MB8GB DS2008TX-NR636Debian 8.34.4.0-104-arm64 (aarch64)GCC 4.9.2Intel Atom Z3735F @ 1.83GHz (4 Cores)Mini PC v2.80Intel ValleyView SSA-CUnit2048MB31GB NCardIntel ValleyView Gen7 (646MHz)Ubuntu 14.043.16.0-45-generic (x86_64)Unity 7.2.6intel 2.99.914GCC 4.8.4ARMv7 rev 5 @ 0.82GHz (4 Cores)sun8i495MB8GB SL08GUbuntu 15.103.4.39-h3 (armv7l)GCC 5.2.1 201510101280x1440ARMv7 rev 5 @ 1.20GHz (4 Cores)AArch64 rev 4 @ 0.82GHz (4 Cores)sun50iw2468MBUbuntu 16.043.10.65 (aarch64)GCC 5.4.0 20160609AArch64 rev 4 (4 Cores)Xunlong Orange Pi PC 2483MB4.10.0-sun50iw2 (aarch64)ARMv8 rev 4 @ 1.42GHz (6 Cores)Rockchip RK3399 VideoStrong Board MID (Android)4096MB31GB BWBD3RTX-NR636Debian 9.14.4.55 (aarch64)LXDEGCC 6.3.0 201705161024x600p86OpenBenchmarking.orgCompiler Details- Orange Pi One on Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Orange Pi PC on Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Orange Pi Plus on Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Raspberry Pi 2 on Raspbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Raspberry Pi 3 on Raspbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Banana Pi M2 by LoveRPi: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M3 by LoveRPi: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M2+ SinoVoip: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M2+ on Armbian: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- Banana Pi M2+ Raspbian 8.0: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- MiQi on Lubuntu 14.04: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- DragonBoard 410c on Debian RPB 16.03: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-libsanitizer --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=arm64 -v- MeUbuntu 14.04.3: --build=x86_64-linux-gnu --disable-browser-plugin --disable-libmudflap --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v- NanoPi NEO 512MB No Heatsink: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- NanoPi NEO 512MB Heatsink: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- NanoPi NEO 512MB Heatsink 2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- NanoPi NEO 512MB Heatsink2: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- NanoPi NEO 2 FA Ubuntu 16.04.2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- NanoPi NEO 2 Armbian Ubuntu 16.04.2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- VS-RK3399 Board - Debian 9: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -vProcessor Details- Orange Pi One on Armbian: Scaling Governor: cpufreq-sunxi interactive- Orange Pi PC on Armbian: Scaling Governor: cpufreq-sunxi interactive- Orange Pi Plus on Armbian: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 on Raspbian: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 on Raspbian: Scaling Governor: BCM2835 Freq ondemand- Banana Pi M2 by LoveRPi: Scaling Governor: cpufreq-dt ondemand- Banana Pi M3 by LoveRPi: Scaling Governor: sunxi-iks interactive- Banana Pi M2+ SinoVoip: Scaling Governor: cpufreq-sunxi interactive- Banana Pi M2+ on Armbian: Scaling Governor: cpufreq-sunxi interactive- Banana Pi M2+ Raspbian 8.0: Scaling Governor: cpufreq-sunxi ondemand- MiQi on Lubuntu 14.04: Scaling Governor: rockchip interactive- DragonBoard 410c on Debian RPB 16.03: Scaling Governor: cpufreq-dt ondemand- MeUbuntu 14.04.3: Scaling Governor: intel_pstate powersave- NanoPi NEO 512MB No Heatsink: Scaling Governor: cpufreq-sunxi interactive- NanoPi NEO 512MB Heatsink: Scaling Governor: cpufreq-sunxi interactive- NanoPi NEO 512MB Heatsink 2: Scaling Governor: cpufreq-sunxi interactive- NanoPi NEO 512MB Heatsink2: Scaling Governor: cpufreq-sunxi interactive- NanoPi NEO 2 FA Ubuntu 16.04.2: Scaling Governor: cpufreq-sunxi interactive- VS-RK3399 Board - Debian 9: Scaling Governor: cpufreq-dt ondemand

Raspberry Pi vs Orange Pi vs Banana Pi 2016-03 Showdown by LoveRPic-ray: Total Timeencode-flac: WAV To FLAChimeno: Poisson Pressure Solverjohn-the-ripper: Blowfishopenssl: RSA 4096-bit Performancesmallpt: Global Illumination Renderer; 100 Samplesmafft: Multiple Sequence AlignmentOrange Pi One on ArmbianOrange Pi PC on ArmbianOrange Pi Plus on ArmbianRaspberry Pi 2 on RaspbianRaspberry Pi 3 on RaspbianBanana Pi M2 by LoveRPiBanana Pi M3 by LoveRPiBanana Pi M2+ SinoVoipBanana Pi M2+ on ArmbianBanana Pi M2+ Raspbian 8.0MiQi on Lubuntu 14.04DragonBoard 410c on Debian RPB 16.03MeUbuntu 14.04.3NanoPi NEO 512MB No HeatsinkNanoPi NEO 512MB HeatsinkNanoPi NEO 512MB Heatsink 2NanoPi NEO 512MB Heatsink2NanoPi NEO 2 FA Ubuntu 16.04.2NanoPi NEO 2 Armbian Ubuntu 16.04.2VS-RK3399 Board - Debian 9365.94229.5464.38509161665344.52228.0968.2355017.20154762.45350.07231.3868.0154017.13154963.17505.44314.5833.2938711.93217575.46250.79237.3060.2859920.60139061.06431.10288.1661.2643813.40195470.58136.1431.80140843.3062129.721777.89279.9556.831043.308127210.62581.37230.2064.3539010.48248381.13893.24282.6063.043236.673906121.86136.9681.9689.84105529.7086642.84341.80198.1466.9153510.90234173.91200.2936.43443.65100366.5362033.12848.52325.7241.323137.682829132.29461.70231.3915.3446212.35213477.66466.89230.9915.3145212.40210175.34350.48236.5152.67456130863.73344.91290.9149.18478128564.4798.0848.84195.30759679OpenBenchmarking.org

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total TimeBanana Pi M2+ SinoVoipBanana Pi M2+ Raspbian 8.0NanoPi NEO 512MB No HeatsinkBanana Pi M2+ on ArmbianRaspberry Pi 2 on RaspbianNanoPi NEO 512MB Heatsink2NanoPi NEO 512MB HeatsinkBanana Pi M2 by LoveRPiOrange Pi One on ArmbianNanoPi NEO 2 FA Ubuntu 16.04.2Orange Pi Plus on ArmbianNanoPi NEO 2 Armbian Ubuntu 16.04.2Orange Pi PC on ArmbianDragonBoard 410c on Debian RPB 16.03Raspberry Pi 3 on RaspbianMeUbuntu 14.04.3MiQi on Lubuntu 14.04Banana Pi M3 by LoveRPiVS-RK3399 Board - Debian 9400800120016002000SE +/- 3.91, N = 3SE +/- 11.64, N = 3SE +/- 27.05, N = 6SE +/- 8.44, N = 6SE +/- 0.74, N = 3SE +/- 4.74, N = 3SE +/- 7.92, N = 3SE +/- 0.02, N = 3SE +/- 0.37, N = 3SE +/- 0.09, N = 3SE +/- 1.06, N = 3SE +/- 0.18, N = 3SE +/- 2.95, N = 3SE +/- 5.37, N = 6SE +/- 0.11, N = 3SE +/- 0.02, N = 3SE +/- 2.39, N = 6SE +/- 0.24, N = 3SE +/- 1.73, N = 31777.89893.24848.52581.37505.44466.89461.70431.10365.94350.48350.07344.91344.52341.80250.79200.29136.96136.1498.081. (CC) gcc options: -lm -lpthread -O3

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format three times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.1WAV To FLACNanoPi NEO 512MB No HeatsinkRaspberry Pi 2 on RaspbianNanoPi NEO 2 Armbian Ubuntu 16.04.2Banana Pi M2 by LoveRPiBanana Pi M2+ Raspbian 8.0Banana Pi M2+ SinoVoipRaspberry Pi 3 on RaspbianNanoPi NEO 2 FA Ubuntu 16.04.2NanoPi NEO 512MB HeatsinkOrange Pi Plus on ArmbianNanoPi NEO 512MB Heatsink2Banana Pi M2+ on ArmbianOrange Pi One on ArmbianOrange Pi PC on ArmbianDragonBoard 410c on Debian RPB 16.03MiQi on Lubuntu 14.04VS-RK3399 Board - Debian 9MeUbuntu 14.04.370140210280350SE +/- 2.55, N = 5SE +/- 1.30, N = 5SE +/- 0.03, N = 5SE +/- 0.09, N = 5SE +/- 0.41, N = 5SE +/- 0.28, N = 5SE +/- 1.73, N = 5SE +/- 0.19, N = 5SE +/- 0.31, N = 5SE +/- 1.46, N = 5SE +/- 0.14, N = 5SE +/- 0.30, N = 5SE +/- 0.16, N = 5SE +/- 1.01, N = 5SE +/- 2.44, N = 7SE +/- 0.35, N = 5SE +/- 0.05, N = 5SE +/- 0.88, N = 10325.72314.58290.91288.16282.60279.95237.30236.51231.39231.38230.99230.20229.54228.09198.1481.9648.8436.431. (CXX) g++ options: -O2 -fvisibility=hidden -lm

Himeno Benchmark

The Himeno benchmark is a linear solver of pressure Poisson using a point-Jacobi method. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMFLOPS, More Is BetterHimeno Benchmark 3.0Poisson Pressure SolverNanoPi NEO 512MB Heatsink2NanoPi NEO 512MB HeatsinkBanana Pi M3 by LoveRPiRaspberry Pi 2 on RaspbianNanoPi NEO 512MB No HeatsinkNanoPi NEO 2 Armbian Ubuntu 16.04.2NanoPi NEO 2 FA Ubuntu 16.04.2Banana Pi M2+ SinoVoipRaspberry Pi 3 on RaspbianBanana Pi M2 by LoveRPiBanana Pi M2+ Raspbian 8.0Banana Pi M2+ on ArmbianOrange Pi One on ArmbianDragonBoard 410c on Debian RPB 16.03Orange Pi Plus on ArmbianOrange Pi PC on ArmbianMiQi on Lubuntu 14.04VS-RK3399 Board - Debian 9MeUbuntu 14.04.3100200300400500SE +/- 0.16, N = 3SE +/- 0.05, N = 3SE +/- 0.49, N = 3SE +/- 0.47, N = 3SE +/- 0.06, N = 3SE +/- 0.21, N = 3SE +/- 1.76, N = 6SE +/- 0.46, N = 3SE +/- 0.37, N = 3SE +/- 0.08, N = 3SE +/- 0.53, N = 3SE +/- 0.37, N = 3SE +/- 0.16, N = 3SE +/- 0.47, N = 3SE +/- 0.04, N = 3SE +/- 0.32, N = 3SE +/- 1.56, N = 3SE +/- 0.80, N = 3SE +/- 2.37, N = 315.3115.3431.8033.2941.3249.1852.6756.8360.2861.2663.0464.3564.3866.9168.0168.2389.84195.30443.651. (CC) gcc options: -O3

OpenBenchmarking.orgMFLOPS Per Dollar, More Is BetterHimeno Benchmark 3.0Performance / Cost - Poisson Pressure SolverBanana Pi M3 by LoveRPiBanana Pi M2 by LoveRPiRaspberry Pi 3 on RaspbianOrange Pi Plus on ArmbianOrange Pi PC on ArmbianOrange Pi One on Armbian2468100.401.361.721.744.556.441. Banana Pi M3 by LoveRPi: $80 reported cost.2. Banana Pi M2 by LoveRPi: $45 reported cost.3. Raspberry Pi 3 on Raspbian: $35 reported cost.4. Orange Pi Plus on Armbian: $39 reported cost.5. Orange Pi PC on Armbian: $15 reported cost.6. Orange Pi One on Armbian: $10 reported cost.

John The Ripper

This is a benchmark of John The Ripper, which is a password cracker. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgReal C/S, More Is BetterJohn The Ripper 1.8.0Test: BlowfishBanana Pi M2+ SinoVoipNanoPi NEO 512MB No HeatsinkBanana Pi M2+ Raspbian 8.0Raspberry Pi 2 on RaspbianBanana Pi M2+ on ArmbianBanana Pi M2 by LoveRPiNanoPi NEO 512MB Heatsink2NanoPi NEO 2 FA Ubuntu 16.04.2NanoPi NEO 512MB HeatsinkNanoPi NEO 2 Armbian Ubuntu 16.04.2Orange Pi One on ArmbianDragonBoard 410c on Debian RPB 16.03Orange Pi Plus on ArmbianOrange Pi PC on ArmbianRaspberry Pi 3 on RaspbianVS-RK3399 Board - Debian 9MeUbuntu 14.04.3MiQi on Lubuntu 14.04Banana Pi M3 by LoveRPi30060090012001500SE +/- 1.55, N = 4SE +/- 11.64, N = 6SE +/- 1.45, N = 3SE +/- 0.67, N = 3SE +/- 22.63, N = 6SE +/- 0.33, N = 3SE +/- 6.98, N = 3SE +/- 1.53, N = 3SE +/- 7.33, N = 3SE +/- 0.33, N = 3SE +/- 24.47, N = 6SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 2.19, N = 3SE +/- 14.50, N = 3SE +/- 83.72, N = 6SE +/- 1.00, N = 3SE +/- 5.24, N = 3104313323387390438452456462478509535540550599759100310551408-lcrypt1. (CC) gcc options: -fopenmp

OpenBenchmarking.orgReal C/S Per Dollar, More Is BetterJohn The Ripper 1.8.0Performance / Cost - Test: BlowfishBanana Pi M2 by LoveRPiOrange Pi Plus on ArmbianRaspberry Pi 3 on RaspbianBanana Pi M3 by LoveRPiOrange Pi PC on ArmbianOrange Pi One on Armbian11223344559.7313.8517.1117.6036.6750.901. Banana Pi M2 by LoveRPi: $45 reported cost.2. Orange Pi Plus on Armbian: $39 reported cost.3. Raspberry Pi 3 on Raspbian: $35 reported cost.4. Banana Pi M3 by LoveRPi: $80 reported cost.5. Orange Pi PC on Armbian: $15 reported cost.6. Orange Pi One on Armbian: $10 reported cost.

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarBanana Pi M2 by LoveRPiOrange Pi Plus on ArmbianBanana Pi M3 by LoveRPiRaspberry Pi 3 on RaspbianOrange Pi PC on ArmbianOrange Pi One on Armbian5101520253.805.346.186.4814.1219.651. Banana Pi M2 by LoveRPi: $45 reported cost. Average result: 170.89.2. Orange Pi Plus on Armbian: $39 reported cost. Average result: 208.38.3. Banana Pi M3 by LoveRPi: $80 reported cost. Average result: 494.37.4. Raspberry Pi 3 on Raspbian: $35 reported cost. Average result: 226.63.5. Orange Pi PC on Armbian: $15 reported cost. Average result: 211.81.6. Orange Pi One on Armbian: $10 reported cost. Average result: 196.46.

OpenSSL

OpenSSL is an open-source toolkit that implements SSL (Secure Sockets Layer) and TLS (Transport Layer Security) protocols. This test measures the RSA 4096-bit performance of OpenSSL. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSigns Per Second, More Is BetterOpenSSL 1.0.1gRSA 4096-bit PerformanceBanana Pi M2+ SinoVoipBanana Pi M2+ Raspbian 8.0NanoPi NEO 512MB No HeatsinkBanana Pi M2+ on ArmbianDragonBoard 410c on Debian RPB 16.03Raspberry Pi 2 on RaspbianNanoPi NEO 512MB HeatsinkNanoPi NEO 512MB Heatsink2Banana Pi M2 by LoveRPiOrange Pi One on ArmbianOrange Pi Plus on ArmbianOrange Pi PC on ArmbianRaspberry Pi 3 on RaspbianMiQi on Lubuntu 14.04Banana Pi M3 by LoveRPiMeUbuntu 14.04.31530456075SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.58, N = 6SE +/- 0.61, N = 6SE +/- 0.40, N = 6SE +/- 0.03, N = 3SE +/- 0.17, N = 6SE +/- 0.23, N = 6SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.03, N = 3SE +/- 0.00, N = 3SE +/- 0.75, N = 6SE +/- 0.00, N = 3SE +/- 0.50, N = 3SE +/- 0.52, N = 33.306.677.6810.4810.9011.9312.3512.4013.4016.0017.1317.2020.6029.7043.3066.53-fomit-frame-pointer-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-march=armv7-a-m641. (CC) gcc options: -O3 -lssl -lcrypto -ldl

OpenBenchmarking.orgSigns Per Second Per Dollar, More Is BetterOpenSSL 1.0.1gPerformance / Cost - RSA 4096-bit PerformanceBanana Pi M2 by LoveRPiOrange Pi Plus on ArmbianBanana Pi M3 by LoveRPiRaspberry Pi 3 on RaspbianOrange Pi PC on ArmbianOrange Pi One on Armbian0.360.721.081.441.80.300.440.540.591.151.601. Banana Pi M2 by LoveRPi: $45 reported cost.2. Orange Pi Plus on Armbian: $39 reported cost.3. Banana Pi M3 by LoveRPi: $80 reported cost.4. Raspberry Pi 3 on Raspbian: $35 reported cost.5. Orange Pi PC on Armbian: $15 reported cost.6. Orange Pi One on Armbian: $10 reported cost.

Smallpt

OpenBenchmarking.orgSeconds, Fewer Is BetterSmallpt 1.0Global Illumination Renderer; 100 SamplesBanana Pi M2+ SinoVoipBanana Pi M2+ Raspbian 8.0NanoPi NEO 512MB No HeatsinkBanana Pi M2+ on ArmbianDragonBoard 410c on Debian RPB 16.03Raspberry Pi 2 on RaspbianNanoPi NEO 512MB HeatsinkNanoPi NEO 512MB Heatsink2Banana Pi M2 by LoveRPiOrange Pi One on ArmbianOrange Pi Plus on ArmbianOrange Pi PC on ArmbianRaspberry Pi 3 on RaspbianNanoPi NEO 2 FA Ubuntu 16.04.2NanoPi NEO 2 Armbian Ubuntu 16.04.2MiQi on Lubuntu 14.04VS-RK3399 Board - Debian 9Banana Pi M3 by LoveRPiMeUbuntu 14.04.32K4K6K8K10KSE +/- 22.54, N = 3SE +/- 7.13, N = 3SE +/- 65.74, N = 3SE +/- 0.58, N = 3SE +/- 148.98, N = 3SE +/- 5.90, N = 3SE +/- 2.89, N = 3SE +/- 1.15, N = 3SE +/- 0.58, N = 3SE +/- 0.00, N = 3SE +/- 0.67, N = 3SE +/- 3.51, N = 3SE +/- 1.86, N = 3SE +/- 0.33, N = 3SE +/- 0.58, N = 3SE +/- 2.67, N = 3SE +/- 9.35, N = 3SE +/- 1.33, N = 3SE +/- 0.58, N = 38127390628292483234121752134210119541665154915471390130812858666796216201. (CXX) g++ options: -fopenmp

Timed MAFFT Alignment

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed MAFFT Alignment 6.864Multiple Sequence AlignmentBanana Pi M2+ SinoVoipNanoPi NEO 512MB No HeatsinkBanana Pi M2+ Raspbian 8.0Banana Pi M2+ on ArmbianNanoPi NEO 512MB HeatsinkRaspberry Pi 2 on RaspbianNanoPi NEO 512MB Heatsink2DragonBoard 410c on Debian RPB 16.03Banana Pi M2 by LoveRPiNanoPi NEO 2 Armbian Ubuntu 16.04.2NanoPi NEO 2 FA Ubuntu 16.04.2Orange Pi Plus on ArmbianOrange Pi PC on ArmbianRaspberry Pi 3 on RaspbianMiQi on Lubuntu 14.04MeUbuntu 14.04.3Banana Pi M3 by LoveRPi50100150200250SE +/- 0.03, N = 3SE +/- 5.07, N = 6SE +/- 4.75, N = 6SE +/- 2.78, N = 6SE +/- 1.14, N = 3SE +/- 1.02, N = 3SE +/- 0.72, N = 3SE +/- 2.46, N = 6SE +/- 0.81, N = 3SE +/- 0.13, N = 3SE +/- 2.13, N = 6SE +/- 0.78, N = 3SE +/- 2.10, N = 6SE +/- 2.58, N = 6SE +/- 0.81, N = 6SE +/- 0.22, N = 3SE +/- 0.14, N = 3210.62132.29121.8681.1377.6675.4675.3473.9170.5864.4763.7363.1762.4561.0642.8433.1229.721. (CC) gcc options: -O3 -lm -lpthread

Orange Pi One on Armbian

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 494MB, Disk: 32GB 00000

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 30 March 2016 03:07 by user dxue.

Orange Pi PC on Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB 00000

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 30 March 2016 06:07 by user dxue.

Orange Pi Plus on Armbian

Processor: ARMv7 rev 5 @ 1.30GHz (4 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 32GB 00000 + 8GB M8G1GC

OS: Debian 8.3, Kernel: 3.4.110-sun8i (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 30 March 2016 07:16 by user dxue.

Raspberry Pi 2 on Raspbian

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 2 Model B Rev 1.1, Memory: 925MB, Disk: 8GB SD

OS: Raspbian 8.0, Kernel: 4.1.13-v7+ (armv7l), Desktop: LXDE 0.7.2, Display Server: X Server 1.16.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 6 January 2016 20:24 by user pi.

Raspberry Pi 3 on Raspbian

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2709 Raspberry Pi 3 Model B Rev 1.2, Memory: 925MB, Disk: 63GB 00000

OS: Raspbian GNU/Linux 8, Kernel: 4.1.20-v7+ (armv7l), Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand

Testing initiated at 29 March 2016 23:34 by user pi.

Banana Pi M2 by LoveRPi

Processor: ARMv7 rev 3 @ 1.01GHz (4 Cores), Motherboard: Allwinner sun6i (A31) Family Sinovoip BPI-M2, Memory: 1024MB, Disk: 129GB 00000

OS: Ubuntu 14.04, Kernel: 4.4.1-sunxi (armv7l), Compiler: GCC 4.8.4, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 30 March 2016 17:13 by user dxue.

Banana Pi M3 by LoveRPi

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 8GB M8G1GC + 129GB TO

OS: Ubuntu 15.10, Kernel: 3.4.39-BPI-M3-aufs (armv7l), Compiler: GCC 5.2.1 20151010, File-System: aufs, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: sunxi-iks interactive

Testing initiated at 30 March 2016 13:44 by user pi.

Banana Pi M2+ SinoVoip

Processor: ARMv7 rev 5 @ 1.20GHz (1 Core), Motherboard: sun8i, Memory: 745MB, Disk: 64GB 00000 + 8GB 8WMB3R

OS: Debian 8.4, Kernel: 3.4.111-sun8i (armv7l), Desktop: Xfce, Display Driver: modesetting 0.9.0, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 7 April 2016 00:08 by user tk.

Banana Pi M2+ on Armbian

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 745MB, Disk: 64GB 00000 + 8GB 8WMB3R

OS: Debian 8.4, Kernel: 3.4.111-sun8i (armv7l), Desktop: Xfce, Display Driver: modesetting 0.9.0, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 7 April 2016 14:13 by user tk.

Banana Pi M2+ Raspbian 8.0

Processor: ARMv7 rev 5 @ 1.20GHz (3 Cores), Motherboard: sun8i, Memory: 1024MB, Disk: 8GB SU08G + 8GB 8WMB3R

OS: Raspbian 8.0, Kernel: 3.4.39-02-lobo (armv7l), Desktop: LXDE, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: cpufreq-sunxi ondemand

Testing initiated at 8 April 2016 05:31 by user pi.

MiQi on Lubuntu 14.04

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip RK3288 (Flattened Device Tree), Memory: 2048MB, Disk: 31GB BIWIN

OS: Ubuntu 14.04, Kernel: 3.10.0 (armv7l), Desktop: LXDE, Compiler: GCC 4.8.4, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libmudflap --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: rockchip interactive

Testing initiated at 20 April 2016 03:33 by user miqi.

DragonBoard 410c on Debian RPB 16.03

Processor: Unknown @ 1.21GHz (4 Cores), Memory: 833MB, Disk: 8GB DS2008, Monitor: TX-NR636

OS: Debian 8.3, Kernel: 4.4.0-104-arm64 (aarch64), Desktop: LXDE, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-libsanitizer --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=arm64 -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 6 May 2016 07:12 by user linaro.

MeUbuntu 14.04.3

Processor: Intel Atom Z3735F @ 1.83GHz (4 Cores), Motherboard: Mini PC v2.80, Chipset: Intel ValleyView SSA-CUnit, Memory: 2048MB, Disk: 31GB NCard, Graphics: Intel ValleyView Gen7 (646MHz), Monitor: TX-NR636

OS: Ubuntu 14.04, Kernel: 3.16.0-45-generic (x86_64), Desktop: Unity 7.2.6, Display Driver: intel 2.99.914, Compiler: GCC 4.8.4, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=x86_64-linux-gnu --disable-browser-plugin --disable-libmudflap --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-abi=m64 --with-arch-32=i686 --with-arch-directory=amd64 --with-multilib-list=m32,m64,mx32 --with-tune=generic -v
Processor Notes: Scaling Governor: intel_pstate powersave

Testing initiated at 22 May 2016 11:19 by user jaufranc.

NanoPi NEO 512MB No Heatsink

Processor: ARMv7 rev 5 @ 0.82GHz (4 Cores), Motherboard: sun8i, Memory: 495MB, Disk: 8GB SL08G

OS: Ubuntu 15.10, Kernel: 3.4.39-h3 (armv7l), Compiler: GCC 5.2.1 20151010, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 21 July 2016 07:41 by user root.

NanoPi NEO 512MB Heatsink

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 21 July 2016 12:50 by user root.

NanoPi NEO 512MB Heatsink 2

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 22 July 2016 02:00 by user root.

NanoPi NEO 512MB Heatsink2

Processor: ARMv7 rev 5 @ 1.20GHz (4 Cores), Motherboard: sun8i, Memory: 495MB, Disk: 8GB SL08G

OS: Ubuntu 15.10, Kernel: 3.4.39-h3 (armv7l), Compiler: GCC 5.2.1 20151010, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 22 July 2016 02:10 by user root.

NanoPi NEO 2 FA Ubuntu 16.04.2

Processor: AArch64 rev 4 @ 0.82GHz (4 Cores), Motherboard: sun50iw2, Memory: 468MB, Disk: 8GB SL08G

OS: Ubuntu 16.04, Kernel: 3.10.65 (aarch64), Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1280x1440

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive

Testing initiated at 1 April 2017 08:21 by user pi.

NanoPi NEO 2 Armbian Ubuntu 16.04.2

Processor: AArch64 rev 4 (4 Cores), Motherboard: Xunlong Orange Pi PC 2, Memory: 483MB, Disk: 8GB SL08G

OS: Ubuntu 16.04, Kernel: 4.10.0-sun50iw2 (aarch64), Compiler: GCC 5.4.0 20160609, File-System: ext4

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v

Testing initiated at 1 April 2017 13:44 by user cnxsoft.

VS-RK3399 Board - Debian 9

Processor: ARMv8 rev 4 @ 1.42GHz (6 Cores), Motherboard: Rockchip RK3399 VideoStrong Board MID (Android), Memory: 4096MB, Disk: 31GB BWBD3R, Monitor: TX-NR636

OS: Debian 9.1, Kernel: 4.4.55 (aarch64), Desktop: LXDE, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x600p86

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand

Testing initiated at 27 September 2017 07:35 by user linaro.