dmesg - 2600mhz-ovdelta20000-nodejs-run12
Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
Linux version 6.6.31+rpt-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29)
KASLR enabled
random: crng init done
Machine model: Raspberry Pi 5 Model B Rev 1.0
efi: UEFI not found.
Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
OF: reserved mem: 0x000000003fd16620..0x000000003fd16688 (0 KiB) nomap non-reusable nvram@0
Zone ranges:
DMA [mem 0x0000000000000000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000001ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000007ffff]
node 0: [mem 0x0000000000080000-0x000000003f7fffff]
node 0: [mem 0x0000000040000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
On node 0, zone DMA: 512 pages in unavailable ranges
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376
pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected PIPT I-cache on CPU0
CPU features: detected: Virtualization Host Extensions
CPU features: detected: Hardware dirty bit management
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
CPU features: kernel page table isolation forced ON by KASLR
CPU features: detected: Kernel page table isolation (KPTI)
alternatives: applying boot alternatives
Unknown kernel command line parameters "splash", will be passed to user space.
Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 521728
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 4.
software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
Memory: 7891648K/8380416K available (13440K kernel code, 2222K rwdata, 4288K rodata, 5056K init, 1213K bss, 161088K reserved, 327680K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 43180 entries in 43 pages
ftrace: allocated 43 pages with 4 groups
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Root IRQ handler: gic_handle_irq
GIC: Using split EOI/Deactivate mode
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 54.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,integrity
Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
cgroup: Disabling memory control group subsystem
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
Detected PIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
Detected PIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: Common not Private translations
CPU features: detected: CRC32 instructions
CPU features: detected: RCpc load-acquire (LDAPR)
CPU features: detected: LSE atomic instructions
CPU features: detected: Privileged Access Never
CPU features: detected: RAS Extension Support
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU: All CPU(s) started at EL2
alternatives: applying system-wide alternatives
devtmpfs: initialized
Enabled cp15_barrier support
Enabled setend support
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 32768 entries
bcm2835-mbox 107c013880.mailbox: mailbox enabled
printk: console [ttyAMA10] enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd
raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000
Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
Modules: 0 pages in range for non-PLT usage
Modules: 129412 pages in range for PLT usage
bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
vgaarb: loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Freeing initrd memory: 17168K
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
zbud: loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
F2FS not supported on PAGE_SIZE(16384) != 4096
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
Console: switching to colour frame buffer device 240x67
simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
serial serial0: tty port ttyS0 registered
iproc-rng200 107d208000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
brd: module loaded
loop: module loaded
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Loading iSCSI transport class v2.0-870.
usbcore: registered new device driver r8152-cfgselector
usbcore: registered new interface driver r8152
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rpi-rtc soc:rpi_rtc: registered as rtc0
rpi-rtc soc:rpi_rtc: setting system clock to 2024-07-12T23:49:52 UTC (1720828192)
bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
brcm-pcie 1000110000.pcie: Forcing gen 3
brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
brcm-pcie 1000110000.pcie: link up, 8.0 GT/s PCIe x1 (!SSC)
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0x1b00000000-0x1b00003fff 64bit]
pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x1b00000000-0x1b00003fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff]
pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
pcieport 0000:00:00.0: enabling device (0000 -> 0002)
pcieport 0000:00:00.0: PME: Signaling with IRQ 38
pcieport 0000:00:00.0: AER: enabled with IRQ 38
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
hwmon hwmon1: temp1_input not attached to any thermal zone
hwmon hwmon1: temp2_input not attached to any thermal zone
hwmon hwmon1: temp3_input not attached to any thermal zone
nvme nvme0: 4/0/0 default/read/poll queues
nvme0n1:
brcm-pcie 1000110000.pcie: clkreq control enabled
brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
brcm-pcie 1000120000.pcie: Forcing gen 2
brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
pci 0001:01:00.0: supports D1
pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
pcieport 0001:00:00.0: enabling device (0000 -> 0002)
pcieport 0001:00:00.0: PME: Signaling with IRQ 44
pcieport 0001:00:00.0: AER: enabled with IRQ 44
rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
rp1 0001:01:00.0: enabling device (0000 -> 0002)
rp1 0001:01:00.0: chip_id 0x20001927
genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 106
macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 112 (2c:cf:67:08:ff:cd)
dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
xhci-hcd xhci-hcd.0: xHCI Host Controller
xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
xhci-hcd xhci-hcd.0: irq 137, io mem 0x1f00200000
xhci-hcd xhci-hcd.0: xHCI Host Controller
xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1: xHCI Host Controller
xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
xhci-hcd xhci-hcd.1: irq 142, io mem 0x1f00300000
xhci-hcd xhci-hcd.1: xHCI Host Controller
xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
usb usb3: SerialNumber: xhci-hcd.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.31+rpt-rpi-2712 xhci-hcd
usb usb4: SerialNumber: xhci-hcd.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
platform 1000800000.codec: Adding to iommu group 0
platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
platform 1000880000.pisp_be: Adding to iommu group 0
platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
platform axi:gpu: Adding to iommu group 1
platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
mmc1: CQHCI version 5.10
of_cfs_init
of_cfs_init: OK
clk: Disabling unused clocks
mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
mmc0: new ultra high speed SDR104 SDXC card at address 59b4
mmcblk0: mmc0:59b4 ED2S5 119 GiB
mmcblk0: p1 p2
mmcblk0: mmc0:59b4 ED2S5 119 GiB (quirks 0x00008000)
mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
Freeing unused kernel memory: 5056K
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
mmc1: new ultra high speed DDR50 SDIO card at address 0001
usb 1-2: new full-speed USB device number 2 using xhci-hcd
usb 3-2: new low-speed USB device number 2 using xhci-hcd
input: pwr_button as /devices/platform/pwr_button/input/input0
[drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
Console: switching to colour dummy device 80x25
vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
Registered IR keymap rc-cec
rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1
input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input2
vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
Registered IR keymap rc-cec
rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input4
vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
usb 3-2: New USB device found, idVendor=1c4f, idProduct=0024, bcdDevice= 1.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer: SIGMACHIP
usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Receiver
usb 1-2: Manufacturer: Logitech
[drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
input: SIGMACHIP USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:1C4F:0024.0001/input/input5
input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C534.0002/input/input6
Console: switching to colour frame buffer device 240x67
hid-generic 0003:1C4F:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1-2/input0
input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:1C4F:0024.0003/input/input7
vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0
input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/input/input9
input: SIGMACHIP USB Keyboard System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:1C4F:0024.0003/input/input8
hid-generic 0003:1C4F:0024.0003: input,hidraw2: USB HID v1.11 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1-2/input1
input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/input/input10
input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/input/input11
hid-generic 0003:046D:C534.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1
logitech-djreceiver 0003:046D:C534.0002: hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0
logitech-djreceiver 0003:046D:C534.0004: hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1
logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input14
input: Logitech Wireless Mouse PID:4054 Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input15
hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-xhci-hcd.0-2/input1:2
input: Logitech Wireless Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input19
logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-xhci-hcd.0-2/input1:2
EXT4-fs (mmcblk0p2): mounted filesystem f382bc55-e740-48d8-8770-2a65d2dc2900 ro with ordered data mode. Quota mode: none.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: systemd 252.26-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
fuse: init (API version 7.39)
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
i2c_dev: i2c /dev entries driver
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
EXT4-fs (mmcblk0p2): re-mounted f382bc55-e740-48d8-8770-2a65d2dc2900 r/w. Quota mode: none.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[310]: Received client request to flush runtime journal.
rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700
pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000
pispbe 1000880000.pisp_be: Register nodes for group 0
pispbe 1000880000.pisp_be: input device node registered as /dev/video20
alsactl[458]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
alsactl[463]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
pispbe 1000880000.pisp_be: config device node registered as /dev/video28
pispbe 1000880000.pisp_be: Register nodes for group 1
pispbe 1000880000.pisp_be: input device node registered as /dev/video29
rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
Bluetooth: HCI UART protocol Broadcom registered
pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
brcmfmac: F1 signature read @0x18000000=0x15264345
rpivid 1000800000.codec: Device registered as /dev/video19
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
pispbe 1000880000.pisp_be: config device node registered as /dev/video37
usbcore: registered new interface driver brcmfmac
brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting
Bluetooth: hci0: BCM: chip id 107
Bluetooth: hci0: BCM: features 0x2f
Bluetooth: hci0: BCM4345C0
Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
Adding 204784k swap on /var/swap. Priority:-2 extents:4 across:32710656k SS
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: hci0: BCM: features 0x2f
Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
pps pps0: new PPS source ptp0
macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx
logitech-hidpp-device 0003:046D:4054.0005: HID++ 4.5 device connected.
sctp: Hash tables configured (bind 1024/1024)
systemd-journald[310]: Data hash table of /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal has a fill level at 75.0 (174764 of 233016 items, 75497472 file size, 431 bytes per hash table item), suggesting rotation.
systemd-journald[310]: /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal: Journal header limits reached or header out-of-date, rotating.
systemd-journald[310]: Data hash table of /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal has a fill level at 75.0 (174763 of 233016 items, 75497472 file size, 431 bytes per hash table item), suggesting rotation.
systemd-journald[310]: /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal: Journal header limits reached or header out-of-date, rotating.
systemd-journald[310]: Data hash table of /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal has a fill level at 75.0 (174763 of 233016 items, 75497472 file size, 431 bytes per hash table item), suggesting rotation.
systemd-journald[310]: /var/log/journal/0a210e4d52054ffb9fb22f59d849f3e3/user-1000.journal: Journal header limits reached or header out-of-date, rotating.