dmesg - Test1A
[ T0] Linux version 6.8.9-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.2.1 20240509 [revision b7a2697733d19a093cbdd0e200ffce069a4bc812], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-3) #1 SMP PREEMPT_DYNAMIC Fri May 10 08:51:14 UTC 2024 (d3445e0)
[ T0] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.9-1-default root=/dev/mapper/system-root splash=silent mitigations=auto quiet security=apparmor nosimplefb=1
[ T0] BIOS-provided physical RAM map:
[ T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ T0] BIOS-e820: [mem 0x0000000000100000-0x0000000066cd1fff] usable
[ T0] BIOS-e820: [mem 0x0000000066cd2000-0x000000006ecd9fff] reserved
[ T0] BIOS-e820: [mem 0x000000006ecda000-0x000000007a088fff] usable
[ T0] BIOS-e820: [mem 0x000000007a089000-0x000000007af0afff] reserved
[ T0] BIOS-e820: [mem 0x000000007af0b000-0x000000007b93afff] ACPI NVS
[ T0] BIOS-e820: [mem 0x000000007b93b000-0x000000007bab8fff] ACPI data
[ T0] BIOS-e820: [mem 0x000000007bab9000-0x000000007bae8fff] usable
[ T0] BIOS-e820: [mem 0x000000007bae9000-0x000000007bafefff] ACPI data
[ T0] BIOS-e820: [mem 0x000000007baff000-0x000000007bafffff] usable
[ T0] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ T0] BIOS-e820: [mem 0x00000000feda8000-0x00000000fedabfff] reserved
[ T0] BIOS-e820: [mem 0x00000000ff310000-0x00000000ffffffff] reserved
[ T0] BIOS-e820: [mem 0x0000000100000000-0x0000000c7fffffff] usable
[ T0] The simpledrm driver will not be probed
[ T0] NX (Execute Disable) protection: active
[ T0] APIC: Static calls initialized
[ T0] e820: update [mem 0x71c96018-0x71cb5857] usable ==> usable
[ T0] e820: update [mem 0x71c96018-0x71cb5857] usable ==> usable
[ T0] e820: update [mem 0x734d3018-0x734db057] usable ==> usable
[ T0] e820: update [mem 0x734d3018-0x734db057] usable ==> usable
[ T0] e820: update [mem 0x71c64018-0x71c95e57] usable ==> usable
[ T0] e820: update [mem 0x71c64018-0x71c95e57] usable ==> usable
[ T0] e820: update [mem 0x71c32018-0x71c63e57] usable ==> usable
[ T0] e820: update [mem 0x71c32018-0x71c63e57] usable ==> usable
[ T0] e820: update [mem 0x71c19018-0x71c31657] usable ==> usable
[ T0] e820: update [mem 0x71c19018-0x71c31657] usable ==> usable
[ T0] extended physical RAM map:
[ T0] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ T0] reserve setup_data: [mem 0x0000000000100000-0x0000000066cd1fff] usable
[ T0] reserve setup_data: [mem 0x0000000066cd2000-0x000000006ecd9fff] reserved
[ T0] reserve setup_data: [mem 0x000000006ecda000-0x0000000071c19017] usable
[ T0] reserve setup_data: [mem 0x0000000071c19018-0x0000000071c31657] usable
[ T0] reserve setup_data: [mem 0x0000000071c31658-0x0000000071c32017] usable
[ T0] reserve setup_data: [mem 0x0000000071c32018-0x0000000071c63e57] usable
[ T0] reserve setup_data: [mem 0x0000000071c63e58-0x0000000071c64017] usable
[ T0] reserve setup_data: [mem 0x0000000071c64018-0x0000000071c95e57] usable
[ T0] reserve setup_data: [mem 0x0000000071c95e58-0x0000000071c96017] usable
[ T0] reserve setup_data: [mem 0x0000000071c96018-0x0000000071cb5857] usable
[ T0] reserve setup_data: [mem 0x0000000071cb5858-0x00000000734d3017] usable
[ T0] reserve setup_data: [mem 0x00000000734d3018-0x00000000734db057] usable
[ T0] reserve setup_data: [mem 0x00000000734db058-0x000000007a088fff] usable
[ T0] reserve setup_data: [mem 0x000000007a089000-0x000000007af0afff] reserved
[ T0] reserve setup_data: [mem 0x000000007af0b000-0x000000007b93afff] ACPI NVS
[ T0] reserve setup_data: [mem 0x000000007b93b000-0x000000007bab8fff] ACPI data
[ T0] reserve setup_data: [mem 0x000000007bab9000-0x000000007bae8fff] usable
[ T0] reserve setup_data: [mem 0x000000007bae9000-0x000000007bafefff] ACPI data
[ T0] reserve setup_data: [mem 0x000000007baff000-0x000000007bafffff] usable
[ T0] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ T0] reserve setup_data: [mem 0x00000000feda8000-0x00000000fedabfff] reserved
[ T0] reserve setup_data: [mem 0x00000000ff310000-0x00000000ffffffff] reserved
[ T0] reserve setup_data: [mem 0x0000000100000000-0x0000000c7fffffff] usable
[ T0] efi: EFI v2.4 by Dell Inc.
[ T0] efi: ACPI 2.0=0x7bab8014 SMBIOS=0x7af0a000 ACPI=0x7bab8000 MOKvar=0x7352d000
[ T0] efi: Remove mem247: MMIO range=[0x80000000-0x8fffffff] (256MB) from e820 map
[ T0] e820: remove [mem 0x80000000-0x8fffffff] reserved
[ T0] efi: Not removing mem248: MMIO range=[0xfeda8000-0xfedabfff] (16KB) from e820 map
[ T0] efi: Remove mem249: MMIO range=[0xff310000-0xffffffff] (12MB) from e820 map
[ T0] e820: remove [mem 0xff310000-0xffffffff] reserved
[ T0] secureboot: Secure boot disabled
[ T0] SMBIOS 2.8 present.
[ T0] DMI: Dell Inc. PowerEdge T430/0XNNCJ, BIOS 2.11.0 12/23/2019
[ T0] tsc: Fast TSC calibration using PIT
[ T0] tsc: Detected 2397.140 MHz processor
[ T0] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ T0] e820: remove [mem 0x000a0000-0x000fffff] usable
[ T0] last_pfn = 0xc80000 max_arch_pfn = 0x400000000
[ T0] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
[ T0] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ T0] last_pfn = 0x7bb00 max_arch_pfn = 0x400000000
[ T0] e820: update [mem 0x7352d000-0x7352dfff] usable ==> reserved
[ T0] Using GB pages for direct mapping
[ T0] secureboot: Secure boot disabled
[ T0] RAMDISK: [mem 0x60e5a000-0x6532cfff]
[ T0] ACPI: Early table checksum verification disabled
[ T0] ACPI: RSDP 0x000000007BAB8014 000024 (v02 DELL )
[ T0] ACPI: XSDT 0x000000007BAB70E8 0000BC (v01 DELL PE_SC3 00000000 01000013)
[ T0] ACPI: FACP 0x000000007BAB3000 0000F4 (v04 DELL PE_SC3 00000000 DELL 00000001)
[ T0] ACPI: DSDT 0x000000007BA9D000 00EACD (v02 DELL PE_SC3 00000003 DELL 00000001)
[ T0] ACPI: FACS 0x000000007B91B000 000040
[ T0] ACPI: MCEJ 0x000000007BAB6000 000130 (v01 INTEL 00000001 INTL 0100000D)
[ T0] ACPI: WD__ 0x000000007BAB5000 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: SLIC 0x000000007BAB4000 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: HPET 0x000000007BAB2000 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: APIC 0x000000007BAB1000 000AFC (v02 DELL PE_SC3 00000000 DELL 00000001)
[ T0] ACPI: MCFG 0x000000007BAB0000 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: MSCT 0x000000007BAAF000 000090 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: SLIT 0x000000007BAAE000 00006C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: SRAT 0x000000007BAAC000 001130 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: SSDT 0x000000007B95A000 1424A9 (v02 DELL PE_SC3 00004000 INTL 20121114)
[ T0] ACPI: SSDT 0x000000007B957000 00217F (v02 DELL PE_SC3 00000002 INTL 20121114)
[ T0] ACPI: SSDT 0x000000007B956000 00006E (v02 DELL PE_SC3 00000002 INTL 20121114)
[ T0] ACPI: PRAD 0x000000007B955000 000132 (v02 DELL PE_SC3 00000002 INTL 20121114)
[ T0] ACPI: DMAR 0x000000007BAFE000 000090 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ T0] ACPI: HEST 0x000000007BAFD000 00017C (v01 DELL PE_SC3 00000002 DELL 00000001)
[ T0] ACPI: BERT 0x000000007BAFC000 000030 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ T0] ACPI: ERST 0x000000007BAFB000 000230 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ T0] ACPI: EINJ 0x000000007BAFA000 000150 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ T0] ACPI: Reserving FACP table memory at [mem 0x7bab3000-0x7bab30f3]
[ T0] ACPI: Reserving DSDT table memory at [mem 0x7ba9d000-0x7baabacc]
[ T0] ACPI: Reserving FACS table memory at [mem 0x7b91b000-0x7b91b03f]
[ T0] ACPI: Reserving MCEJ table memory at [mem 0x7bab6000-0x7bab612f]
[ T0] ACPI: Reserving WD__ table memory at [mem 0x7bab5000-0x7bab5133]
[ T0] ACPI: Reserving SLIC table memory at [mem 0x7bab4000-0x7bab4023]
[ T0] ACPI: Reserving HPET table memory at [mem 0x7bab2000-0x7bab2037]
[ T0] ACPI: Reserving APIC table memory at [mem 0x7bab1000-0x7bab1afb]
[ T0] ACPI: Reserving MCFG table memory at [mem 0x7bab0000-0x7bab003b]
[ T0] ACPI: Reserving MSCT table memory at [mem 0x7baaf000-0x7baaf08f]
[ T0] ACPI: Reserving SLIT table memory at [mem 0x7baae000-0x7baae06b]
[ T0] ACPI: Reserving SRAT table memory at [mem 0x7baac000-0x7baad12f]
[ T0] ACPI: Reserving SSDT table memory at [mem 0x7b95a000-0x7ba9c4a8]
[ T0] ACPI: Reserving SSDT table memory at [mem 0x7b957000-0x7b95917e]
[ T0] ACPI: Reserving SSDT table memory at [mem 0x7b956000-0x7b95606d]
[ T0] ACPI: Reserving PRAD table memory at [mem 0x7b955000-0x7b955131]
[ T0] ACPI: Reserving DMAR table memory at [mem 0x7bafe000-0x7bafe08f]
[ T0] ACPI: Reserving HEST table memory at [mem 0x7bafd000-0x7bafd17b]
[ T0] ACPI: Reserving BERT table memory at [mem 0x7bafc000-0x7bafc02f]
[ T0] ACPI: Reserving ERST table memory at [mem 0x7bafb000-0x7bafb22f]
[ T0] ACPI: Reserving EINJ table memory at [mem 0x7bafa000-0x7bafa14f]
[ T0] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ T0] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ T0] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xc7fffffff]
[ T0] NUMA: Initialized distance table, cnt=1
[ T0] NODE_DATA(0) allocated [mem 0xc7ffd4000-0xc7fffefff]
[ T0] Zone ranges:
[ T0] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ T0] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ T0] Normal [mem 0x0000000100000000-0x0000000c7fffffff]
[ T0] Device empty
[ T0] Movable zone start for each node
[ T0] Early memory node ranges
[ T0] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ T0] node 0: [mem 0x0000000000100000-0x0000000066cd1fff]
[ T0] node 0: [mem 0x000000006ecda000-0x000000007a088fff]
[ T0] node 0: [mem 0x000000007bab9000-0x000000007bae8fff]
[ T0] node 0: [mem 0x000000007baff000-0x000000007bafffff]
[ T0] node 0: [mem 0x0000000100000000-0x0000000c7fffffff]
[ T0] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c7fffffff]
[ T0] On node 0, zone DMA: 1 pages in unavailable ranges
[ T0] On node 0, zone DMA: 96 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 32776 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 6704 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 22 pages in unavailable ranges
[ T0] On node 0, zone Normal: 17664 pages in unavailable ranges
[ T0] ACPI: PM-Timer IO Port: 0x408
[ T0] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x40] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x41] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x42] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x43] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x44] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x45] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x46] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x47] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x48] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x49] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x4f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x50] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x51] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x52] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x53] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x54] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x55] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x56] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x57] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x58] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x59] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x5f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x60] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x61] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x62] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x63] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x64] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x65] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x66] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x67] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x68] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x69] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x6f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x70] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x71] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x72] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x73] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x74] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x75] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x76] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x77] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x78] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x79] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x7f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x80] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x81] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x82] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x83] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x84] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x85] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x86] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x87] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x88] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x89] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x8f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x90] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x91] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x92] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x93] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x94] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x95] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x96] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x97] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x98] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x99] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9a] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9b] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9c] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9d] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9e] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x9f] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa0] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa1] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa2] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa3] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa4] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa5] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa6] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa7] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa8] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xa9] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xaa] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xab] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xac] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xad] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xae] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xaf] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb0] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb1] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb2] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb3] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb4] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb5] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb6] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb7] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb8] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xb9] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xba] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xbb] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xbc] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xbd] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xbe] high level lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0xbf] high level lint[0x1])
[ T0] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ T0] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ T0] ACPI: Using ACPI (MADT) for SMP configuration information
[ T0] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ T0] TSC deadline timer available
[ T0] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ T0] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x66cd2000-0x6ecd9fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c19000-0x71c19fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c31000-0x71c31fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c32000-0x71c32fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c63000-0x71c63fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c64000-0x71c64fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c95000-0x71c95fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71c96000-0x71c96fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x71cb5000-0x71cb5fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x734d3000-0x734d3fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x734db000-0x734dbfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7352d000-0x7352dfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7a089000-0x7af0afff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7af0b000-0x7b93afff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7b93b000-0x7bab8fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7bae9000-0x7bafefff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x7bb00000-0xfeda7fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfeda8000-0xfedabfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfedac000-0xffffffff]
[ T0] [mem 0x7bb00000-0xfeda7fff] available for PCI devices
[ T0] Booting paravirtualized kernel on bare hardware
[ T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ T0] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ T0] percpu: Embedded 70 pages/cpu s249856 r8192 d28672 u524288
[ T0] pcpu-alloc: s249856 r8192 d28672 u524288 alloc=1*2097152
[ T0] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ T0] pcpu-alloc: [0] 08 09 10 11
[ T0] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.9-1-default root=/dev/mapper/system-root splash=silent mitigations=auto quiet security=apparmor nosimplefb=1
[ T0] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.8.9-1-default splash=silent", will be passed to user space.
[ T0] random: crng init done
[ T0] printk: log_buf_len individual max cpu contribution: 32768 bytes
[ T0] printk: log_buf_len total cpu_extra contributions: 360448 bytes
[ T0] printk: log_buf_len min size: 262144 bytes
[ T0] printk: log_buf_len: 1048576 bytes
[ T0] printk: early log buf free: 235248(89%)
[ T0] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ T0] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ T0] Fallback order for Node 0: 0
[ T0] Built 1 zonelists, mobility grouping on. Total pages: 12328751
[ T0] Policy zone: Normal
[ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ T0] software IO TLB: area num 16.
[ T0] Memory: 1669668K/50102596K available (16384K kernel code, 2960K rwdata, 12736K rodata, 4272K init, 4436K bss, 1270260K reserved, 0K cma-reserved)
[ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ T0] Kernel/User page tables isolation: enabled
[ T0] ftrace: allocating 46931 entries in 184 pages
[ T0] ftrace: allocated 184 pages with 4 groups
[ T0] Dynamic Preempt: voluntary
[ T0] rcu: Preemptible hierarchical RCU implementation.
[ T0] rcu: RCU event tracing is enabled.
[ T0] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
[ T0] Trampoline variant of Tasks RCU enabled.
[ T0] Rude variant of Tasks RCU enabled.
[ T0] Tracing variant of Tasks RCU enabled.
[ T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ T0] NR_IRQS: 524544, nr_irqs: 928, preallocated irqs: 16
[ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ T0] Console: colour dummy device 80x25
[ T0] printk: legacy console [tty0] enabled
[ T0] ACPI: Core revision 20230628
[ T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ T0] APIC: Switch to symmetric I/O mode setup
[ T0] DMAR: Host address width 46
[ T0] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
[ T0] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
[ T0] DMAR: RMRR base: 0x00000066cd2000 end: 0x0000006ecd9fff
[ T0] DMAR: ATSR flags: 0x0
[ T0] DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
[ T0] DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
[ T0] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
[ T0] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ T0] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ T0] DMAR-IR: Enabled IRQ remapping in xapic mode
[ T0] x2apic: IRQ remapping doesn't support X2APIC mode
[ T0] APIC: Switched APIC routing to: physical flat
[ T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228da9a6c06, max_idle_ns: 440795223802 ns
[ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 4796.04 BogoMIPS (lpj=7990466)
[ T0] CPU0: Thermal monitoring enabled (TM1)
[ T0] process: using mwait in idle threads
[ T0] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ T0] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ T0] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ T0] Spectre V2 : Mitigation: Retpolines
[ T0] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ T0] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ T0] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ T0] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ T0] Spectre V2 : User space: Mitigation: STIBP via prctl
[ T0] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ T0] MDS: Mitigation: Clear CPU buffers
[ T0] MMIO Stale Data: Mitigation: Clear CPU buffers
[ T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ T0] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ T0] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ T0] Freeing SMP alternatives memory: 40K
[ T0] pid_max: default: 32768 minimum: 301
[ T0] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,integrity
[ T0] landlock: Up and running.
[ T0] Yama: becoming mindful.
[ T0] AppArmor: AppArmor initialized
[ T0] LSM support for eBPF active
[ T0] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ T0] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ T1] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2)
[ T1] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ T1] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ T1] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ T1] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ T1] ... version: 3
[ T1] ... bit width: 48
[ T1] ... generic registers: 4
[ T1] ... value mask: 0000ffffffffffff
[ T1] ... max period: 00007fffffffffff
[ T1] ... fixed-purpose events: 3
[ T1] ... event mask: 000000070000000f
[ T1] signal: max sigframe size: 1776
[ T1] Estimated ratio of average max frequency by base frequency (times 1024): 1194
[ T1] rcu: Hierarchical SRCU implementation.
[ T1] rcu: Max phase no-delay instances is 1000.
[ T10] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ T1] smp: Bringing up secondary CPUs ...
[ T1] smpboot: x86: Booting SMP configuration:
[ T1] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ T1] MDS CPU bug present and SMT on, data leak possible. See for more details.
[ T1] MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
[ T1] smp: Brought up 1 node, 12 CPUs
[ T1] smpboot: Max logical packages: 1
[ T1] smpboot: Total of 12 processors activated (57554.49 BogoMIPS)
[ T87] node 0 deferred pages initialised in 47ms
[ T1] devtmpfs: initialized
[ T1] x86/mm: Memory block size: 128MB
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0x7af0b000-0x7b93afff] (10682368 bytes)
[ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ T1] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ T1] pinctrl core: initialized pinctrl subsystem
[ T1] PM: RTC time: 16:42:47, date: 2024-07-07
[ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ T1] audit: initializing netlink subsys (disabled)
[ T101] audit: type=2000 audit(1720370567.109:1): state=initialized audit_enabled=0 res=1
[ T1] thermal_sys: Registered thermal governor 'fair_share'
[ T1] thermal_sys: Registered thermal governor 'bang_bang'
[ T1] thermal_sys: Registered thermal governor 'step_wise'
[ T1] thermal_sys: Registered thermal governor 'user_space'
[ T1] cpuidle: using governor ladder
[ T1] cpuidle: using governor menu
[ T1] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ T1] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ T1] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff]
[ T1] PCI: not using ECAM ([mem 0x80000000-0x8fffffff] not reserved)
[ T1] PCI: Using configuration type 1 for base access
[ T1] PCI: Dell System detected, enabling pci=bfsort.
[ T1] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ T1] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ T1] ACPI: Added _OSI(Module Device)
[ T1] ACPI: Added _OSI(Processor Device)
[ T1] ACPI: Added _OSI(3.0 _SCP Extensions)
[ T1] ACPI: Added _OSI(Processor Aggregator Device)
[ T1] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ T1] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ T1] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ T1] ACPI: Interpreter enabled
[ T1] ACPI: PM: (supports S0 S5)
[ T1] ACPI: Using IOAPIC for interrupt routing
[ T1] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff]
[ T1] PCI: [Firmware Info]: ECAM [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
[ T1] PCI: ECAM [mem 0x80000000-0x8fffffff] is EfiMemoryMappedIO; assuming valid
[ T1] PCI: ECAM [mem 0x80000000-0x8fffffff] reserved to work around lack of ACPI motherboard _CRS
[ T1] HEST: Table parsing has been initialized.
[ T1] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ T1] PCI: Using E820 reservations for host bridge windows
[ T1] ACPI: Enabled 2 GPEs in block 00 to 3F
[ T1] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[ T1] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ T1] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
[ T1] PCI host bridge to bus 0000:ff
[ T1] pci_bus 0000:ff: root bus resource [bus ff]
[ T1] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 conventional PCI endpoint
[ T1] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 conventional PCI endpoint
[ T1] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 conventional PCI endpoint
[ T1] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 conventional PCI endpoint
[ T1] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 conventional PCI endpoint
[ T1] pci 0000:ff:12.2: [8086:2f70] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 conventional PCI endpoint
[ T1] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 conventional PCI endpoint
[ T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ T1] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ T1] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ T1] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ T1] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ T1] PCI host bridge to bus 0000:00
[ T1] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x38000000000-0x3bfffffffff window]
[ T1] pci_bus 0000:00: root bus resource [bus 00-fe]
[ T1] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 PCIe Root Port
[ T1] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ T1] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ T1] pci 0000:00:02.0: bridge window [mem 0x91000000-0x920fffff]
[ T1] pci 0000:00:02.0: bridge window [mem 0x3bfe0000000-0x3bff1ffffff 64bit pref]
[ T1] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:03.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:05.4: BAR 0 [mem 0x93512000-0x93512fff]
[ T1] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 conventional PCI endpoint
[ T1] pci 0000:00:14.0: BAR 0 [mem 0x93500000-0x9350ffff 64bit]
[ T1] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ T1] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 conventional PCI endpoint
[ T1] pci 0000:00:16.0: BAR 0 [mem 0x3bff2003000-0x3bff200300f 64bit]
[ T1] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 conventional PCI endpoint
[ T1] pci 0000:00:16.1: BAR 0 [mem 0x3bff2002000-0x3bff200200f 64bit]
[ T1] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1a.0: BAR 0 [mem 0x93511000-0x935113ff]
[ T1] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ T1] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.1: [8086:8d12] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.1: PCI bridge to [bus 05-09]
[ T1] pci 0000:00:1c.1: bridge window [mem 0x92800000-0x931fffff]
[ T1] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.2: bridge window [mem 0x93200000-0x932fffff 64bit pref]
[ T1] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ T1] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ T1] pci 0000:00:1c.4: bridge window [mem 0x93300000-0x934fffff]
[ T1] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1d.0: BAR 0 [mem 0x93510000-0x935103ff]
[ T1] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 conventional PCI endpoint
[ T1] pci 0000:02:00.0: [10de:1b81] type 00 class 0x030000 PCIe Legacy Endpoint
[ T1] pci 0000:02:00.0: BAR 0 [mem 0x91000000-0x91ffffff]
[ T1] pci 0000:02:00.0: BAR 1 [mem 0x3bfe0000000-0x3bfefffffff 64bit pref]
[ T1] pci 0000:02:00.0: BAR 3 [mem 0x3bff0000000-0x3bff1ffffff 64bit pref]
[ T1] pci 0000:02:00.0: BAR 5 [io 0x3000-0x307f]
[ T1] pci 0000:02:00.0: ROM [mem 0xfff80000-0xffffffff pref]
[ T1] pci 0000:02:00.1: [10de:10f0] type 00 class 0x040300 PCIe Endpoint
[ T1] pci 0000:02:00.1: BAR 0 [mem 0x92000000-0x92003fff]
[ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ T1] pci 0000:00:03.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ T1] pci 0000:05:00.0: [1912:001d] type 01 class 0x060400 PCIe Switch Upstream Port
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06-09]
[ T1] pci 0000:05:00.0: bridge window [mem 0x92800000-0x931fffff]
[ T1] pci 0000:05:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.1: PCI bridge to [bus 05-09]
[ T1] pci 0000:06:00.0: [1912:001d] type 01 class 0x060400 PCIe Switch Downstream Port
[ T1] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ T1] pci 0000:06:00.0: bridge window [mem 0x92800000-0x930fffff]
[ T1] pci 0000:06:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06-09]
[ T1] pci 0000:07:00.0: [1912:001a] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[ T1] pci 0000:07:00.0: PCI bridge to [bus 08]
[ T1] pci 0000:07:00.0: bridge window [mem 0x92800000-0x930fffff]
[ T1] pci 0000:07:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ T1] pci_bus 0000:08: extended config space not accessible
[ T1] pci 0000:08:00.0: [102b:0534] type 00 class 0x030000 conventional PCI endpoint
[ T1] pci 0000:08:00.0: BAR 0 [mem 0x90000000-0x90ffffff pref]
[ T1] pci 0000:08:00.0: BAR 1 [mem 0x93000000-0x93003fff]
[ T1] pci 0000:08:00.0: BAR 2 [mem 0x92800000-0x92ffffff]
[ T1] pci 0000:08:00.0: BAR 0: assigned to efifb
[ T1] pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ T1] pci 0000:07:00.0: PCI bridge to [bus 08]
[ T1] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 PCIe Endpoint
[ T1] pci 0000:01:00.0: BAR 0 [mem 0x93230000-0x9323ffff 64bit pref]
[ T1] pci 0000:01:00.0: BAR 2 [mem 0x93240000-0x9324ffff 64bit pref]
[ T1] pci 0000:01:00.0: BAR 4 [mem 0x93250000-0x9325ffff 64bit pref]
[ T1] pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref]
[ T1] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.2 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[ T1] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 PCIe Endpoint
[ T1] pci 0000:01:00.1: BAR 0 [mem 0x93200000-0x9320ffff 64bit pref]
[ T1] pci 0000:01:00.1: BAR 2 [mem 0x93210000-0x9321ffff 64bit pref]
[ T1] pci 0000:01:00.1: BAR 4 [mem 0x93220000-0x9322ffff 64bit pref]
[ T1] pci 0000:01:00.1: ROM [mem 0xfffc0000-0xffffffff pref]
[ T1] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 01]
[ T1] pci 0000:0a:00.0: [1000:005f] type 00 class 0x010400 PCIe Endpoint
[ T1] pci 0000:0a:00.0: BAR 0 [io 0x2000-0x20ff]
[ T1] pci 0000:0a:00.0: BAR 1 [mem 0x93400000-0x9340ffff 64bit]
[ T1] pci 0000:0a:00.0: BAR 3 [mem 0x93300000-0x933fffff 64bit]
[ T1] pci 0000:0a:00.0: ROM [mem 0xfffe0000-0xffffffff pref]
[ T1] pci 0000:0a:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ T1] pci 0000:0a:00.0: supports D1 D2
[ T1] pci 0000:0a:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ T1] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ T1] pci_bus 0000:00: on NUMA node 0
[ T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKA disabled
[ T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKB disabled
[ T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKC disabled
[ T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKD disabled
[ T1] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKE disabled
[ T1] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKF disabled
[ T1] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKG disabled
[ T1] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKH disabled
[ T1] iommu: Default domain type: Passthrough
[ T1] pps_core: LinuxPPS API ver. 1 registered
[ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ T1] PTP clock support registered
[ T1] EDAC MC: Ver: 3.0.0
[ T1] efivars: Registered efivars operations
[ T1] NetLabel: Initializing
[ T1] NetLabel: domain hash size = 128
[ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ T1] NetLabel: unlabeled traffic allowed by default
[ T1] mctp: management component transport protocol core
[ T1] NET: Registered PF_MCTP protocol family
[ T1] PCI: Using ACPI for IRQ routing
[ T1] PCI: pci_cache_line_size set to 64 bytes
[ T1] e820: reserve RAM buffer [mem 0x66cd2000-0x67ffffff]
[ T1] e820: reserve RAM buffer [mem 0x71c19018-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x71c32018-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x71c64018-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x71c96018-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x734d3018-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x7352d000-0x73ffffff]
[ T1] e820: reserve RAM buffer [mem 0x7a089000-0x7bffffff]
[ T1] e820: reserve RAM buffer [mem 0x7bae9000-0x7bffffff]
[ T1] e820: reserve RAM buffer [mem 0x7bb00000-0x7bffffff]
[ T1] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ T1] pci 0000:02:00.0: vgaarb: bridge control possible
[ T1] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ T1] pci 0000:08:00.0: vgaarb: setting as boot VGA device (overriding previous)
[ T1] pci 0000:08:00.0: vgaarb: bridge control possible
[ T1] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ T1] vgaarb: loaded
[ T1] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ T1] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ T1] clocksource: Switched to clocksource tsc-early
[ T1] VFS: Disk quotas dquot_6.6.0
[ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ T1] AppArmor: AppArmor Filesystem Enabled
[ T1] pnp: PnP ACPI init
[ T1] system 00:01: [io 0x0500-0x053f] has been reserved
[ T1] system 00:01: [io 0x0400-0x047f] has been reserved
[ T1] system 00:01: [io 0x0540-0x057f] has been reserved
[ T1] system 00:01: [io 0x0600-0x061f] has been reserved
[ T1] system 00:01: [io 0x0ca0-0x0ca5] has been reserved
[ T1] system 00:01: [io 0x0880-0x0883] has been reserved
[ T1] system 00:01: [io 0x0800-0x081f] has been reserved
[ T1] system 00:01: [mem 0xfeda8000-0xfedcbfff] could not be reserved
[ T1] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ T1] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ T1] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ T1] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ T1] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ T1] system 00:04: [io 0x0ca8] has been reserved
[ T1] system 00:04: [io 0x0cac] has been reserved
[ T1] pnp: PnP ACPI: found 5 devices
[ T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ T1] NET: Registered PF_INET protocol family
[ T1] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ T1] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ T1] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ T1] TCP: Hash tables configured (established 524288 bind 65536)
[ T1] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[ T1] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ T1] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ T1] NET: Registered PF_XDP protocol family
[ T1] pci 0000:02:00.0: ROM [mem 0xfff80000-0xffffffff pref]: can't claim; no compatible bridge window
[ T1] pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window
[ T1] pci 0000:01:00.1: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window
[ T1] pci 0000:0a:00.0: ROM [mem 0xfffe0000-0xffffffff pref]: can't claim; no compatible bridge window
[ T1] pci 0000:00:1c.2: bridge window [mem 0x92100000-0x921fffff]: assigned
[ T1] pci 0000:02:00.0: ROM [mem 0x92080000-0x920fffff pref]: assigned
[ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ T1] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ T1] pci 0000:00:02.0: bridge window [mem 0x91000000-0x920fffff]
[ T1] pci 0000:00:02.0: bridge window [mem 0x3bfe0000000-0x3bff1ffffff 64bit pref]
[ T1] pci 0000:00:03.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ T1] pci 0000:07:00.0: PCI bridge to [bus 08]
[ T1] pci 0000:07:00.0: bridge window [mem 0x92800000-0x930fffff]
[ T1] pci 0000:07:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ T1] pci 0000:06:00.0: bridge window [mem 0x92800000-0x930fffff]
[ T1] pci 0000:06:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06-09]
[ T1] pci 0000:05:00.0: bridge window [mem 0x92800000-0x931fffff]
[ T1] pci 0000:05:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:00:1c.1: PCI bridge to [bus 05-09]
[ T1] pci 0000:00:1c.1: bridge window [mem 0x92800000-0x931fffff]
[ T1] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci 0000:01:00.0: ROM [mem 0x92100000-0x9213ffff pref]: assigned
[ T1] pci 0000:01:00.1: ROM [mem 0x92140000-0x9217ffff pref]: assigned
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.2: bridge window [mem 0x92100000-0x921fffff]
[ T1] pci 0000:00:1c.2: bridge window [mem 0x93200000-0x932fffff 64bit pref]
[ T1] pci 0000:0a:00.0: ROM [mem 0x93420000-0x9343ffff pref]: assigned
[ T1] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[ T1] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ T1] pci 0000:00:1c.4: bridge window [mem 0x93300000-0x934fffff]
[ T1] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
[ T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
[ T1] pci_bus 0000:00: resource 8 [mem 0x38000000000-0x3bfffffffff window]
[ T1] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ T1] pci_bus 0000:02: resource 1 [mem 0x91000000-0x920fffff]
[ T1] pci_bus 0000:02: resource 2 [mem 0x3bfe0000000-0x3bff1ffffff 64bit pref]
[ T1] pci_bus 0000:05: resource 1 [mem 0x92800000-0x931fffff]
[ T1] pci_bus 0000:05: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci_bus 0000:06: resource 1 [mem 0x92800000-0x931fffff]
[ T1] pci_bus 0000:06: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci_bus 0000:07: resource 1 [mem 0x92800000-0x930fffff]
[ T1] pci_bus 0000:07: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci_bus 0000:08: resource 1 [mem 0x92800000-0x930fffff]
[ T1] pci_bus 0000:08: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ T1] pci_bus 0000:01: resource 1 [mem 0x92100000-0x921fffff]
[ T1] pci_bus 0000:01: resource 2 [mem 0x93200000-0x932fffff 64bit pref]
[ T1] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ T1] pci_bus 0000:0a: resource 1 [mem 0x93300000-0x934fffff]
[ T1] pci 0000:00:05.0: disabled boot interrupts on device [8086:2f28]
[ T1] pci 0000:02:00.1: extending delay after power-on from D3hot to 20 msec
[ T1] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
[ T1] PCI: CLS 0 bytes, default 64
[ T1] DMAR: [Firmware Bug]: RMRR entry for device 0a:00.0 is broken - applying workaround
[ T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ T1] software IO TLB: mapped [mem 0x000000005ce5a000-0x0000000060e5a000] (64MB)
[ T11] Trying to unpack rootfs image as initramfs...
[ T1] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[ T1] RAPL PMU: hw unit of domain package 2^-14 Joules
[ T1] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ T1] Initialise system trusted keyrings
[ T1] Key type blacklist registered
[ T1] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[ T1] zbud: loaded
[ T1] integrity: Platform Keyring initialized
[ T1] integrity: Machine keyring initialized
[ T1] Key type asymmetric registered
[ T1] Asymmetric key parser 'x509' registered
[ T11] Freeing initrd memory: 70476K
[ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ T1] io scheduler mq-deadline registered
[ T1] io scheduler kyber registered
[ T1] io scheduler bfq registered
[ T8] pcieport 0000:00:02.0: PME: Signaling with IRQ 25
[ T8] pcieport 0000:00:02.0: AER: enabled with IRQ 25
[ T8] pcieport 0000:00:03.0: PME: Signaling with IRQ 26
[ T8] pcieport 0000:00:03.0: AER: enabled with IRQ 26
[ T8] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27
[ T8] pcieport 0000:00:1c.0: AER: enabled with IRQ 27
[ T8] pcieport 0000:00:1c.1: PME: Signaling with IRQ 28
[ T8] pcieport 0000:00:1c.1: AER: enabled with IRQ 28
[ T8] pcieport 0000:00:1c.2: PME: Signaling with IRQ 29
[ T8] pcieport 0000:00:1c.2: AER: enabled with IRQ 29
[ T8] pcieport 0000:00:1c.4: PME: Signaling with IRQ 30
[ T8] pcieport 0000:00:1c.4: AER: enabled with IRQ 30
[ T1] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ T8] Monitor-Mwait will be used to enter C-1 state
[ T8] Monitor-Mwait will be used to enter C-2 state
[ T1] ACPI: \_SB_.SCK0.CP00: Found 2 idle states
[ T1] ERST: Error Record Serialization Table (ERST) support is initialized.
[ T1] pstore: Using crash dump compression: deflate
[ T1] pstore: Registered erst as persistent store backend
[ T1] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ T1] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ T1] Non-volatile memory driver v1.3
[ T1] Linux agpgart interface v0.103
[ T1] ACPI: bus type drm_connector registered
[ T1] i8042: PNP: No PS/2 controller found.
[ T1] mousedev: PS/2 mouse device common for all mice
[ T1] rtc_cmos 00:00: RTC can wake from S4
[ T1] rtc_cmos 00:00: registered as rtc0
[ T1] rtc_cmos 00:00: setting system clock to 2024-07-07T16:42:48 UTC (1720370568)
[ T1] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ T1] intel_pstate: Intel P-state driver initializing
[ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ T1] efifb: probing for efifb
[ T1] efifb: framebuffer at 0x90000000, using 3072k, total 3072k
[ T1] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ T1] efifb: scrolling: redraw
[ T1] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ T1] Console: switching to colour frame buffer device 128x48
[ T1] fb0: EFI VGA frame buffer device
[ T1] hid: raw HID events driver (C) Jiri Kosina
[ T1] drop_monitor: Initializing network drop monitor service
[ T1] NET: Registered PF_INET6 protocol family
[ T1] Segment Routing with IPv6
[ T1] RPL Segment Routing with IPv6
[ T1] In-situ OAM (IOAM) with IPv6
[ T1] microcode: Current revision: 0x00000049
[ T1] microcode: Updated early from: 0x00000043
[ T1] resctrl: L3 monitoring detected
[ T1] IPI shorthand broadcast: enabled
[ T1] sched_clock: Marking stable (733335322, 916164)->(739612752, -5361266)
[ T1] registered taskstats version 1
[ T1] Loading compiled-in X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] page_owner is disabled
[ T1] Key type .fscrypt registered
[ T1] Key type fscrypt-provisioning registered
[ T1] Key type encrypted registered
[ T1] AppArmor: AppArmor sha256 policy hashing enabled
[ T1] integrity: Loading X.509 certificate: UEFI:db
[ T1] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ T1] integrity: Loading X.509 certificate: UEFI:db
[ T1] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ T1] ima: No TPM chip found, activating TPM-bypass!
[ T1] Loading compiled-in module X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] ima: Allocated hash algorithm: sha256
[ T1] ima: No architecture policies found
[ T1] evm: Initialising EVM extended attributes:
[ T1] evm: security.selinux
[ T1] evm: security.SMACK64 (disabled)
[ T1] evm: security.SMACK64EXEC (disabled)
[ T1] evm: security.SMACK64TRANSMUTE (disabled)
[ T1] evm: security.SMACK64MMAP (disabled)
[ T1] evm: security.apparmor
[ T1] evm: security.ima
[ T1] evm: security.capability
[ T1] evm: HMAC attrs: 0x1
[ T1] PM: Magic number: 0:912:741
[ T1] acpi LNXCPU:3d: hash matches
[ T1] workqueue writeback: hash matches
[ T1] RAS: Correctable Errors collector initialized.
[ T1] clk: Disabling unused clocks
[ T1] Freeing unused decrypted memory: 2028K
[ T1] Freeing unused kernel image (initmem) memory: 4272K
[ T1] Write protecting the kernel read-only data: 30720k
[ T1] Freeing unused kernel image (rodata/data gap) memory: 1600K
[ T1] Run /init as init process
[ T1] with arguments:
[ T1] /init
[ T1] with environment:
[ T1] HOME=/
[ T1] TERM=linux
[ T1] BOOT_IMAGE=/boot/vmlinuz-6.8.9-1-default
[ T1] splash=silent
[ T1] systemd[1]: systemd 255.6+suse.27.ga3dccacb97 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: Running in initrd.
[ T1] systemd[1]: No hostname configured, using default hostname.
[ T1] systemd[1]: Hostname set to .
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: Queued start job for default target Initrd Default Target.
[ T1] systemd[1]: Expecting device /dev/mapper/system-root...
[ T1] systemd[1]: Reached target Initrd /usr File System.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target Swaps.
[ T1] systemd[1]: Reached target Timer Units.
[ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ T1] systemd[1]: Listening on Journal Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Reached target Socket Units.
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Virtual Console Setup...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T264] i2c_dev: i2c /dev entries driver
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ T1] systemd[1]: Finished Load Kernel Modules.
[ T1] systemd[1]: Starting Apply Kernel Variables...
[ T263] systemd-journald[263]: Collecting audit messages is disabled.
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev.
[ T1] systemd[1]: Reached target Preparation for Local File Systems.
[ T1] systemd[1]: Reached target Local File Systems.
[ T1] systemd[1]: Finished Apply Kernel Variables.
[ T1] systemd[1]: Started Journal Service.
[ T419] device-mapper: uevent: version 1.0.3
[ T419] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ T426] raid6: avx2x4 gen() 30367 MB/s
[ T426] raid6: avx2x2 gen() 30215 MB/s
[ T414] tsc: Refined TSC clocksource calibration: 2397.222 MHz
[ T414] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x228df7309b5, max_idle_ns: 440795314334 ns
[ T426] raid6: avx2x1 gen() 18272 MB/s
[ T426] raid6: using algorithm avx2x4 gen() 30367 MB/s
[ T426] raid6: .... xor() 8352 MB/s, rmw enabled
[ T426] raid6: using avx2x2 recovery algorithm
[ T414] clocksource: Switched to clocksource tsc
[ T426] xor: automatically using best checksumming function avx
[ T426] Btrfs loaded, assert=on, zoned=yes, fsverity=yes
[ T445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ T445] ACPI: button: Power Button [PWRF]
[ T460] cryptd: max_cpu_qlen set to 1000
[ T414] Console: switching to colour dummy device 80x25
[ T414] mgag200 0000:08:00.0: vgaarb: deactivate vga console
[ T461] ACPI: bus type USB registered
[ T476] AVX2 version of gcm_enc/dec engaged.
[ T461] usbcore: registered new interface driver usbfs
[ T461] usbcore: registered new interface driver hub
[ T461] usbcore: registered new device driver usb
[ T476] AES CTR mode by8 optimization enabled
[ T414] [drm] Initialized mgag200 1.0.0 20110418 for 0000:08:00.0 on minor 0
[ T8] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ T8] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ T8] ehci-pci 0000:00:1a.0: debug port 2
[ T8] ehci-pci 0000:00:1a.0: irq 18, io mem 0x93511000
[ T447] SCSI subsystem initialized
[ T414] fbcon: mgag200drmfb (fb0) is primary device
[ T8] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ T8] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ T8] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T8] usb usb1: Product: EHCI Host Controller
[ T8] usb usb1: Manufacturer: Linux 6.8.9-1-default ehci_hcd
[ T8] usb usb1: SerialNumber: 0000:00:1a.0
[ T8] hub 1-0:1.0: USB hub found
[ T8] hub 1-0:1.0: 2 ports detected
[ T10] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ T10] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ T10] ehci-pci 0000:00:1d.0: debug port 2
[ T10] ehci-pci 0000:00:1d.0: irq 18, io mem 0x93510000
[ T10] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ T10] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ T10] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T10] usb usb2: Product: EHCI Host Controller
[ T10] usb usb2: Manufacturer: Linux 6.8.9-1-default ehci_hcd
[ T10] usb usb2: SerialNumber: 0000:00:1d.0
[ T10] hub 2-0:1.0: USB hub found
[ T10] hub 2-0:1.0: 2 ports detected
[ T8] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T8] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ T8] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ T447] alua: device handler registered
[ T447] rdac: device handler registered
[ T447] emc: device handler registered
[ T414] Console: switching to colour frame buffer device 180x56
[ T447] megasas: 07.727.03.00-rc1
[ T132] megaraid_sas 0000:0a:00.0: BAR:0x1 BAR's base_addr(phys):0x0000000093400000 mapped virt_addr:0x0000000084f3e375
[ T132] megaraid_sas 0000:0a:00.0: FW now in Ready state
[ T132] megaraid_sas 0000:0a:00.0: 63 bit DMA mask and 32 bit consistent mask
[ T132] megaraid_sas 0000:0a:00.0: firmware supports msix : (96)
[ T132] megaraid_sas 0000:0a:00.0: requested/available msix 13/13 poll_queue 0
[ T132] megaraid_sas 0000:0a:00.0: current msix/online cpus : (13/12)
[ T132] megaraid_sas 0000:0a:00.0: RDPQ mode : (disabled)
[ T132] megaraid_sas 0000:0a:00.0: Current firmware supports maximum commands: 928 LDIO threshold: 237
[ T132] megaraid_sas 0000:0a:00.0: Performance mode :Latency (latency index = 1)
[ T132] megaraid_sas 0000:0a:00.0: FW supports sync cache : No
[ T132] megaraid_sas 0000:0a:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ T8] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T8] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ T8] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ T8] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ T8] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T8] usb usb3: Product: xHCI Host Controller
[ T8] usb usb3: Manufacturer: Linux 6.8.9-1-default xhci-hcd
[ T8] usb usb3: SerialNumber: 0000:00:14.0
[ T414] mgag200 0000:08:00.0: [drm] fb0: mgag200drmfb frame buffer device
[ T8] hub 3-0:1.0: USB hub found
[ T8] hub 3-0:1.0: 15 ports detected
[ T8] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ T8] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T8] usb usb4: Product: xHCI Host Controller
[ T8] usb usb4: Manufacturer: Linux 6.8.9-1-default xhci-hcd
[ T8] usb usb4: SerialNumber: 0000:00:14.0
[ T8] hub 4-0:1.0: USB hub found
[ T8] hub 4-0:1.0: 6 ports detected
[ T8] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ T414] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ T132] megaraid_sas 0000:0a:00.0: FW provided supportMaxExtLDs: 0 max_lds: 32
[ T132] megaraid_sas 0000:0a:00.0: controller type : iMR(0MB)
[ T132] megaraid_sas 0000:0a:00.0: Online Controller Reset(OCR) : Enabled
[ T132] megaraid_sas 0000:0a:00.0: Secure JBOD support : No
[ T132] megaraid_sas 0000:0a:00.0: NVMe passthru support : No
[ T132] megaraid_sas 0000:0a:00.0: FW provided TM TaskAbort/Reset timeout : 0 secs/0 secs
[ T132] megaraid_sas 0000:0a:00.0: JBOD sequence map support : No
[ T132] megaraid_sas 0000:0a:00.0: PCI Lane Margining support : No
[ T132] megaraid_sas 0000:0a:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000
[ T132] megaraid_sas 0000:0a:00.0: INIT adapter done
[ T132] megaraid_sas 0000:0a:00.0: JBOD sequence map is disabled megasas_setup_jbod_map 5796
[ T10] usb 3-4: new low-speed USB device number 2 using xhci_hcd
[ T132] megaraid_sas 0000:0a:00.0: pci id : (0x1000)/(0x005f)/(0x1028)/(0x1f44)
[ T132] megaraid_sas 0000:0a:00.0: unevenspan support : yes
[ T132] megaraid_sas 0000:0a:00.0: firmware crash dump : no
[ T132] megaraid_sas 0000:0a:00.0: JBOD sequence map : disabled
[ T132] megaraid_sas 0000:0a:00.0: Max firmware commands: 927 shared with default hw_queues = 12 poll_queues 0
[ T132] scsi host0: Avago SAS based MegaRAID driver
[ T97] scsi 0:0:0:0: Direct-Access ATA ST8000DM004-2U91 0001 PQ: 0 ANSI: 6
[ T8] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05
[ T8] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ T8] hub 1-1:1.0: USB hub found
[ T8] hub 1-1:1.0: 6 ports detected
[ T414] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05
[ T414] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ T414] hub 2-1:1.0: USB hub found
[ T414] hub 2-1:1.0: 8 ports detected
[ T10] usb 3-4: New USB device found, idVendor=046d, idProduct=c054, bcdDevice=54.00
[ T10] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T10] usb 3-4: Product: USB Optical Mouse
[ T10] usb 3-4: Manufacturer: Logitech
[ T470] usbcore: registered new interface driver usbhid
[ T470] usbhid: USB HID core driver
[ T97] scsi 0:0:1:0: Direct-Access ATA WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 6
[ T10] usb 3-5: new low-speed USB device number 3 using xhci_hcd
[ T10] usb 3-5: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.50
[ T10] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T10] usb 3-5: Product: USB Keyboard
[ T10] usb 3-5: Manufacturer: SIGMACHIP
[ T484] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C054.0001/input/input1
[ T484] hid-generic 0003:046D:C054.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[ T484] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1C4F:0002.0002/input/input2
[ T97] scsi 0:0:4:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 6
[ T484] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-5/input0
[ T484] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1C4F:0002.0003/input/input3
[ T484] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1C4F:0002.0003/input/input4
[ T484] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-5/input1
[ T10] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[ T97] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ T97] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ T97] scsi 0:0:4:0: Attached scsi generic sg2 type 0
[ T97] sd 0:0:4:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ T97] sd 0:0:4:0: [sdc] 4096-byte physical blocks
[ T97] sd 0:0:4:0: [sdc] Write Protect is off
[ T97] sd 0:0:4:0: [sdc] Mode Sense: 9b 00 10 08
[ T91] sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ T91] sd 0:0:1:0: [sdb] 4096-byte physical blocks
[ T97] sd 0:0:4:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ T91] sd 0:0:1:0: [sdb] Write Protect is off
[ T91] sd 0:0:1:0: [sdb] Mode Sense: 9b 00 10 08
[ T91] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ T97] sdc: sdc1 sdc2
[ T97] sd 0:0:4:0: [sdc] Attached SCSI disk
[ T91] sdb: sdb1
[ T91] sd 0:0:1:0: [sdb] Attached SCSI disk
[ T11] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ T11] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ T10] usb 3-6: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[ T10] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T10] usb 3-6: Product: USB Audio Device
[ T10] usb 3-6: Manufacturer: GeneralPlus
[ T10] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.3/0003:1B3F:2008.0004/input/input5
[ T10] hid-generic 0003:1B3F:2008.0004: input,hidraw3: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-6/input3
[ T11] sd 0:0:0:0: [sda] Write Protect is off
[ T11] sd 0:0:0:0: [sda] Mode Sense: 9b 00 10 08
[ T11] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ T11] sda: sda1
[ T11] sd 0:0:0:0: [sda] Attached SCSI disk
[ T120] usb 4-6: new SuperSpeed USB device number 2 using xhci_hcd
[ T120] usb 4-6: LPM exit latency is zeroed, disabling LPM.
[ T120] usb 4-6: New USB device found, idVendor=413c, idProduct=a101, bcdDevice= 0.00
[ T120] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ T120] usb 4-6: Product: Internal Dual SD
[ T120] usb 4-6: Manufacturer: DELL
[ T120] usb 4-6: SerialNumber: 012345678901
[ T470] usb-storage 4-6:1.0: USB Mass Storage device detected
[ T470] scsi host1: usb-storage 4-6:1.0
[ T470] usbcore: registered new interface driver usb-storage
[ T470] usbcore: registered new interface driver uas
[ T10] usb 3-11: new high-speed USB device number 6 using xhci_hcd
[ T10] usb 3-11: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ T10] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ T10] usb 3-11: Product: 802.11n NIC
[ T10] usb 3-11: Manufacturer: Realtek
[ T10] usb 3-11: SerialNumber: 00E04C0001
[ T10] usb 3-12: new high-speed USB device number 7 using xhci_hcd
[ T10] usb 3-12: New USB device found, idVendor=413c, idProduct=a001, bcdDevice= 0.00
[ T10] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ T10] usb 3-12: Product: Gadget USB HUB
[ T10] usb 3-12: Manufacturer: no manufacturer
[ T10] usb 3-12: SerialNumber: 0123456789
[ T10] hub 3-12:1.0: USB hub found
[ T10] hub 3-12:1.0: 6 ports detected
[ T691] BTRFS: device fsid 1623d59e-b290-4588-bdc9-60c74aa958fc devid 1 transid 498216 /dev/mapper/system-root scanned by mount (691)
[ T691] BTRFS info (device dm-1): first mount of filesystem 1623d59e-b290-4588-bdc9-60c74aa958fc
[ T691] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm
[ T691] BTRFS info (device dm-1): using free-space-tree
[ T93] scsi 1:0:0:0: Direct-Access DELL IDSDM 0001 PQ: 0 ANSI: 0
[ T93] sd 1:0:0:0: Attached scsi generic sg3 type 0
[ T11] sd 1:0:0:0: [sdd] 15564800 512-byte logical blocks: (7.97 GB/7.42 GiB)
[ T11] sd 1:0:0:0: [sdd] Write Protect is off
[ T11] sd 1:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ T11] sd 1:0:0:0: [sdd] No Caching mode page found
[ T11] sd 1:0:0:0: [sdd] Assuming drive cache: write through
[ T11] sdd: sdd1 sdd5 sdd6 sdd7 sdd8 sdd9
[ T11] sd 1:0:0:0: [sdd] Attached SCSI disk
[ T263] systemd-journald[263]: Received SIGTERM from PID 1 (systemd).
[ T1] systemd[1]: systemd 255.6+suse.27.ga3dccacb97 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: bpf-lsm: LSM BPF program attached
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Switch Root.
[ T1] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ T1] systemd[1]: Created slice Slice /system/getty.
[ T1] systemd[1]: Created slice Slice /system/modprobe.
[ T1] systemd[1]: Created slice Slice /system/systemd-fsck.
[ T1] systemd[1]: Created slice User and Session Slice.
[ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ T1] systemd[1]: Stopped target Switch Root.
[ T1] systemd[1]: Stopped target Initrd File Systems.
[ T1] systemd[1]: Stopped target Initrd Root File System.
[ T1] systemd[1]: Reached target Local Integrity Protected Volumes.
[ T1] systemd[1]: Reached target Remote File Systems.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target System Time Set.
[ T1] systemd[1]: Reached target Local Verity Protected Volumes.
[ T1] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ T1] systemd[1]: Listening on LVM2 poll daemon socket.
[ T1] systemd[1]: Listening on Process Core Dump Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Activating swap /dev/system/swap...
[ T1] systemd[1]: Mounting Huge Pages File System...
[ T1] systemd[1]: Mounting POSIX Message Queue File System...
[ T1] systemd[1]: Mounting Kernel Debug File System...
[ T1] systemd[1]: Mounting Kernel Trace File System...
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ T1] systemd[1]: Starting Load Kernel Module configfs...
[ T1] systemd[1]: Starting Load Kernel Module dm_mod...
[ T1] systemd[1]: Starting Load Kernel Module drm...
[ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ T1] systemd[1]: Starting Load Kernel Module fuse...
[ T1] systemd[1]: Starting Load Kernel Module loop...
[ T1] systemd[1]: plymouth-start.service: Deactivated successfully.
[ T1] systemd[1]: plymouth-start.service: Unit process 577 (plymouthd) remains running after unit stopped.
[ T1] systemd[1]: Stopped Show Plymouth Boot Screen.
[ T1] systemd[1]: plymouth-start.service: Consumed 10.364s CPU time.
[ T1] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ T1] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Plymouth switch root service.
[ T1] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped File System Check on Root Device.
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ T1] systemd[1]: Starting Coldplug All udev Devices...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module dm_mod.
[ T1] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module drm.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T756] systemd-journald[756]: Collecting audit messages is disabled.
[ T1] systemd[1]: Started Journal Service.
[ T754] fuse: init (API version 7.39)
[ T755] loop: module loaded
[ T743] Adding 2097148k swap on /dev/mapper/system-swap. Priority:-2 extents:1 across:2097148k
[ T756] systemd-journald[756]: Received client request to flush runtime journal.
[ T756] systemd-journald[756]: /var/log/journal/9bca98f1f5be42e7843f167c00c269aa/system.journal: Journal file uses a different sequence number ID, rotating.
[ T756] systemd-journald[756]: Rotating system journal.
[ T101] audit: type=1400 audit(1720370591.034:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=851 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.034:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=844 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.034:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=844 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.064:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=843 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.281:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=855 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.381:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=848 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.381:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript" pid=842 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.381:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/hpijs" pid=842 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.381:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=841 comm="apparmor_parser"
[ T101] audit: type=1400 audit(1720370591.381:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd-classic" pid=849 comm="apparmor_parser"
[ T950] IPMI message handler: version 39.2
[ T950] ipmi device interface
[ T573] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ T927] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ T950] ipmi_si: IPMI System Interface driver
[ T950] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ T950] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
[ T950] ipmi_si: Adding SMBIOS-specified kcs state machine
[ T950] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
[ T573] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 44:a8:42:3e:ed:70
[ T573] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ T573] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ T573] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ T899] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ T573] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 44:a8:42:3e:ed:71
[ T573] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ T573] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ T573] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ T950] ipmi_si dmi-ipmi-si.0: The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed.
[ T930] iTCO_vendor_support: vendor-support=0
[ T950] ipmi_si dmi-ipmi-si.0: Using irq 10
[ T898] mc: Linux media interface: v0.10
[ T950] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
[ T950] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
[ T950] ipmi_ssif: IPMI SSIF Interface driver
[ T930] iTCO_wdt iTCO_wdt.1.auto: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
[ T930] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ T898] usbcore: registered new interface driver snd-usb-audio
[ T935] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ T935] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ T935] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ T904] tg3 0000:01:00.1 em2: renamed from eth1
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f60
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f71
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f71
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2faa
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2faa
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fab
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fab
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fac
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fac
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fad
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fad
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f68
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f79
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f6a
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f6b
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f6c
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2f6d
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbd
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbd
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbf
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbf
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fb9
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fb9
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbb
[ T901] EDAC sbridge: Seeking for: PCI ID 8086:2fbb
[ T901] EDAC MC0: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
[ T901] EDAC sbridge: Ver: 1.1.2
[ T941] tg3 0000:01:00.0 em1: renamed from eth0
[ T20] intel_rapl_common: Found RAPL domain package
[ T20] intel_rapl_common: Found RAPL domain dram
[ T20] intel_rapl_common: package-0:package:long_term locked by BIOS
[ T20] intel_rapl_common: package-0:package:short_term locked by BIOS
[ T20] intel_rapl_common: package-0:dram:long_term locked by BIOS
[ T1039] BTRFS: device fsid f1cb680b-7b27-4b6c-b0ed-fdf6d823e4b8 devid 1 transid 90054 /dev/sda1 scanned by mount (1039)
[ T1039] BTRFS info (device sda1): first mount of filesystem f1cb680b-7b27-4b6c-b0ed-fdf6d823e4b8
[ T1039] BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm
[ T1039] BTRFS info (device sda1): using free-space-tree
[ T935] usb 3-11: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ T935] usb 3-11: RTL8188EU MAC: 5c:62:8b:08:d2:06
[ T935] usb 3-11: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
[ T935] usb 3-11: Firmware revision 28.0 (signature 0x88e1)
[ T935] usbcore: registered new interface driver rtl8xxxu
[ T904] rtl8xxxu 3-11:1.0 wlp0s20u11: renamed from wlan0
[ T925] BTRFS info: devid 1 device path /dev/mapper/system-root changed to /dev/dm-1 scanned by (udev-worker) (925)
[ T925] BTRFS info: devid 1 device path /dev/dm-1 changed to /dev/mapper/system-root scanned by (udev-worker) (925)
[ T1297] msr: Write to unrecognized MSR 0x17f by mcelog (pid: 1297).
[ T1297] msr: See for details.
[ T1389] NET: Registered PF_QIPCRTR protocol family
[ T1408] nvidia: loading out-of-tree module taints kernel.
[ T1408] nvidia: module license 'NVIDIA' taints kernel.
[ T1408] Disabling lock debugging due to kernel taint
[ T1408] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ T1408] nvidia: module license taints kernel.
[ T1408] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ T573] nvidia 0000:02:00.0: enabling device (0002 -> 0003)
[ T573] nvidia 0000:02:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ T1408] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.239.06 Sat Feb 3 06:03:07 UTC 2024
[ T1414] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ T1414] nvidia-uvm: Loaded the UVM driver, major device number 237.
[ T1517] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.239.06 Sat Feb 3 06:03:51 UTC 2024
[ T1517] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[ T1517] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 1
[ T1664] NET: Registered PF_PACKET protocol family
[ T1620] wlp0s20u11: authenticate with a0:ff:70:75:18:1b (local address=5c:62:8b:08:d2:06)
[ T1620] wlp0s20u11: send auth to a0:ff:70:75:18:1b (try 1/3)
[ T93] wlp0s20u11: authenticated
[ T93] wlp0s20u11: associate with a0:ff:70:75:18:1b (try 1/3)
[ T93] wlp0s20u11: RX AssocResp from a0:ff:70:75:18:1b (capab=0x1531 status=0 aid=2)
[ T93] usb 3-11: rtl8xxxu_bss_info_changed: HT supported
[ T93] wlp0s20u11: associated
[ T93] wlp0s20u11: Limiting TX power to 30 (30 - 0) dBm as advertised by a0:ff:70:75:18:1b
[ T756] systemd-journald[756]: /var/log/journal/9bca98f1f5be42e7843f167c00c269aa/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ T2701] [drm:drm_new_set_master] *ERROR* [nvidia-drm] [GPU ID 0x00000200] Failed to grab modeset ownership
[ T2803] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ T120] usb 3-13: new high-speed USB device number 8 using xhci_hcd
[ T120] usb 3-13: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
[ T120] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ T120] usb 3-13: Product: iPhone
[ T120] usb 3-13: Manufacturer: Apple Inc.
[ T120] usb 3-13: SerialNumber: faa639cf5dc706974d98fed6edaab941a583594c
[ T3211] usbcore: registered new device driver apple-mfi-fastcharge
[ T3211] ipheth 3-13:4.2: ipheth_enable_ncm: usb_control_msg: 0
[ T3211] ipheth 3-13:4.2: Apple iPhone USB Ethernet device attached
[ T3211] usbcore: registered new interface driver ipheth
[ T3211] ipheth 3-13:4.2 enp0s20u13c4i2: renamed from eth0
[ T4916] BTRFS info (device dm-1): qgroup scan paused
[T22521] apple-mfi-fastcharge 3-13: USB disconnect, device number 8
[T22521] ipheth 3-13:4.2: Apple iPhone USB Ethernet now disconnected
[T22521] usb 3-13: new high-speed USB device number 9 using xhci_hcd
[T22521] usb 3-13: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 9.03
[T22521] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[T22521] usb 3-13: Product: iPhone
[T22521] usb 3-13: Manufacturer: Apple Inc.
[T22521] usb 3-13: SerialNumber: faa639cf5dc706974d98fed6edaab941a583594c
[T28973] ipheth 3-13:4.2: ipheth_enable_ncm: usb_control_msg: 0
[T28973] ipheth 3-13:4.2: Apple iPhone USB Ethernet device attached
[T28971] ipheth 3-13:4.2 enp0s20u13c4i2: renamed from eth0