dmesg - 3D-Test
[ T0] Linux version 6.9.3-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.3.0, GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-3) #1 SMP PREEMPT_DYNAMIC Thu May 30 08:29:01 UTC 2024 (279162a)
[ T0] BIOS-provided physical RAM map:
[ T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ T0] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ T0] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ T0] BIOS-e820: [mem 0x0000000000100000-0x00000000b6a21fff] usable
[ T0] BIOS-e820: [mem 0x00000000b6a22000-0x00000000b6a57fff] ACPI data
[ T0] BIOS-e820: [mem 0x00000000b6a58000-0x00000000b87e0fff] usable
[ T0] BIOS-e820: [mem 0x00000000b87e1000-0x00000000b87e1fff] ACPI NVS
[ T0] BIOS-e820: [mem 0x00000000b87e2000-0x00000000b87e2fff] reserved
[ T0] BIOS-e820: [mem 0x00000000b87e3000-0x00000000c55a6fff] usable
[ T0] BIOS-e820: [mem 0x00000000c55a7000-0x00000000c6d07fff] reserved
[ T0] BIOS-e820: [mem 0x00000000c6d08000-0x00000000c6d1afff] ACPI data
[ T0] BIOS-e820: [mem 0x00000000c6d1b000-0x00000000c6edbfff] usable
[ T0] BIOS-e820: [mem 0x00000000c6edc000-0x00000000c751bfff] ACPI NVS
[ T0] BIOS-e820: [mem 0x00000000c751c000-0x00000000c7afefff] reserved
[ T0] BIOS-e820: [mem 0x00000000c7aff000-0x00000000c7afffff] usable
[ T0] BIOS-e820: [mem 0x00000000c7b00000-0x00000000c7ffffff] reserved
[ T0] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ T0] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ T0] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ T0] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ T0] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ T0] BIOS-e820: [mem 0x0000000100000000-0x0000000835ffffff] usable
[ T0] NX (Execute Disable) protection: active
[ T0] APIC: Static calls initialized
[ T0] SMBIOS 3.0.0 present.
[ T0] DMI: System manufacturer System Product Name/Q170M-C, BIOS 4212 07/24/2019
[ T0] tsc: Detected 3400.000 MHz processor
[ T0] tsc: Detected 3399.906 MHz TSC
[ T0] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ T0] e820: remove [mem 0x000a0000-0x000fffff] usable
[ T0] last_pfn = 0x836000 max_arch_pfn = 0x400000000
[ T0] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ T0] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ T0] last_pfn = 0xc7b00 max_arch_pfn = 0x400000000
[ T0] found SMP MP-table at [mem 0x000fccc0-0x000fcccf]
[ T0] Using GB pages for direct mapping
[ T0] RAMDISK: [mem 0x2a873000-0x31430fff]
[ T0] ACPI: Early table checksum verification disabled
[ T0] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ T0] ACPI: XSDT 0x00000000B6A220A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: FACP 0x00000000B6A4B7F8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: DSDT 0x00000000B6A22210 0295E7 (v02 ALASKA A M I 01072009 INTL 20160422)
[ T0] ACPI: FACS 0x00000000C7503C40 000040
[ T0] ACPI: APIC 0x00000000B6A4B910 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: FPDT 0x00000000B6A4B9D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: ASF! 0x00000000B6A57160 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ T0] ACPI: MCFG 0x00000000B6A4BA70 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ T0] ACPI: SSDT 0x00000000B6A4BAB0 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ T0] ACPI: FIDT 0x00000000B6A4BE40 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: SSDT 0x00000000B6A4BEE0 003041 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ T0] ACPI: SSDT 0x00000000B6A4EF28 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ T0] ACPI: HPET 0x00000000B6A51470 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ T0] ACPI: SSDT 0x00000000B6A514A8 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ T0] ACPI: SSDT 0x00000000B6A522E8 000B1B (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ T0] ACPI: UEFI 0x00000000B6A52E08 000042 (v01 INTEL EDK2 00000002 01000013)
[ T0] ACPI: SSDT 0x00000000B6A52E50 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ T0] ACPI: LPIT 0x00000000B6A53D30 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ T0] ACPI: WSMT 0x00000000B6A53DC8 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ T0] ACPI: SSDT 0x00000000B6A53DF0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ T0] ACPI: SSDT 0x00000000B6A54090 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ T0] ACPI: DBGP 0x00000000B6A57098 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ T0] ACPI: DBG2 0x00000000B6A570D0 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ T0] ACPI: TPM2 0x00000000B6A57128 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ T0] ACPI: Reserving FACP table memory at [mem 0xb6a4b7f8-0xb6a4b90b]
[ T0] ACPI: Reserving DSDT table memory at [mem 0xb6a22210-0xb6a4b7f6]
[ T0] ACPI: Reserving FACS table memory at [mem 0xc7503c40-0xc7503c7f]
[ T0] ACPI: Reserving APIC table memory at [mem 0xb6a4b910-0xb6a4b9cb]
[ T0] ACPI: Reserving FPDT table memory at [mem 0xb6a4b9d0-0xb6a4ba13]
[ T0] ACPI: Reserving ASF! table memory at [mem 0xb6a57160-0xb6a571ff]
[ T0] ACPI: Reserving MCFG table memory at [mem 0xb6a4ba70-0xb6a4baab]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a4bab0-0xb6a4be3f]
[ T0] ACPI: Reserving FIDT table memory at [mem 0xb6a4be40-0xb6a4bedb]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a4bee0-0xb6a4ef20]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a4ef28-0xb6a5146b]
[ T0] ACPI: Reserving HPET table memory at [mem 0xb6a51470-0xb6a514a7]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a514a8-0xb6a522e2]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a522e8-0xb6a52e02]
[ T0] ACPI: Reserving UEFI table memory at [mem 0xb6a52e08-0xb6a52e49]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a52e50-0xb6a53d2d]
[ T0] ACPI: Reserving LPIT table memory at [mem 0xb6a53d30-0xb6a53dc3]
[ T0] ACPI: Reserving WSMT table memory at [mem 0xb6a53dc8-0xb6a53def]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a53df0-0xb6a5408e]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xb6a54090-0xb6a57091]
[ T0] ACPI: Reserving DBGP table memory at [mem 0xb6a57098-0xb6a570cb]
[ T0] ACPI: Reserving DBG2 table memory at [mem 0xb6a570d0-0xb6a57123]
[ T0] ACPI: Reserving TPM2 table memory at [mem 0xb6a57128-0xb6a5715b]
[ T0] No NUMA configuration found
[ T0] Faking a node at [mem 0x0000000000000000-0x0000000835ffffff]
[ T0] NODE_DATA(0) allocated [mem 0x835fd5000-0x835ffffff]
[ T0] Zone ranges:
[ T0] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ T0] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ T0] Normal [mem 0x0000000100000000-0x0000000835ffffff]
[ T0] Device empty
[ T0] Movable zone start for each node
[ T0] Early memory node ranges
[ T0] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ T0] node 0: [mem 0x0000000000100000-0x00000000b6a21fff]
[ T0] node 0: [mem 0x00000000b6a58000-0x00000000b87e0fff]
[ T0] node 0: [mem 0x00000000b87e3000-0x00000000c55a6fff]
[ T0] node 0: [mem 0x00000000c6d1b000-0x00000000c6edbfff]
[ T0] node 0: [mem 0x00000000c7aff000-0x00000000c7afffff]
[ T0] node 0: [mem 0x0000000100000000-0x0000000835ffffff]
[ T0] Initmem setup node 0 [mem 0x0000000000001000-0x0000000835ffffff]
[ T0] On node 0, zone DMA: 1 pages in unavailable ranges
[ T0] On node 0, zone DMA: 100 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 54 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 2 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 6004 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 3107 pages in unavailable ranges
[ T0] On node 0, zone Normal: 1280 pages in unavailable ranges
[ T0] On node 0, zone Normal: 8192 pages in unavailable ranges
[ T0] ACPI: PM-Timer IO Port: 0x1808
[ T0] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ T0] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ T0] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ T0] ACPI: Using ACPI (MADT) for SMP configuration information
[ T0] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ T0] TSC deadline timer available
[ T0] CPU topo: Max. logical packages: 1
[ T0] CPU topo: Max. logical dies: 1
[ T0] CPU topo: Max. dies per package: 1
[ T0] CPU topo: Max. threads per core: 2
[ T0] CPU topo: Num. cores per package: 4
[ T0] CPU topo: Num. threads per package: 8
[ T0] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[ T0] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xb6a22000-0xb6a57fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xb87e1000-0xb87e1fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xb87e2000-0xb87e2fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc55a7000-0xc6d07fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc6d08000-0xc6d1afff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc6edc000-0xc751bfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc751c000-0xc7afefff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc7b00000-0xc7ffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ T0] [mem 0xc8000000-0xf7ffffff] available for PCI devices
[ T0] Booting paravirtualized kernel on bare hardware
[ T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ T0] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ T0] percpu: Embedded 72 pages/cpu s258048 r8192 d28672 u524288
[ T0] pcpu-alloc: s258048 r8192 d28672 u524288 alloc=1*2097152
[ T0] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ T0] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.9.3-1-default splash=silent", will be passed to user space.
[ T0] random: crng init done
[ T0] printk: log_buf_len individual max cpu contribution: 32768 bytes
[ T0] printk: log_buf_len total cpu_extra contributions: 229376 bytes
[ T0] printk: log_buf_len min size: 262144 bytes
[ T0] printk: log_buf_len: 524288 bytes
[ T0] printk: early log buf free: 249592(95%)
[ T0] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ T0] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ T0] Fallback order for Node 0: 0
[ T0] Built 1 zonelists, mobility grouping on. Total pages: 8238932
[ T0] Policy zone: Normal
[ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ T0] software IO TLB: area num 8.
[ T0] Memory: 3188936K/33479472K available (16384K kernel code, 3000K rwdata, 12940K rodata, 4224K init, 4384K bss, 802796K reserved, 0K cma-reserved)
[ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ T0] Kernel/User page tables isolation: enabled
[ T0] ftrace: allocating 47508 entries in 186 pages
[ T0] ftrace: allocated 186 pages with 5 groups
[ T0] Dynamic Preempt: voluntary
[ T0] rcu: Preemptible hierarchical RCU implementation.
[ T0] rcu: RCU event tracing is enabled.
[ T0] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ T0] Trampoline variant of Tasks RCU enabled.
[ T0] Rude variant of Tasks RCU enabled.
[ T0] Tracing variant of Tasks RCU enabled.
[ T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ T0] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ T0] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ T0] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ T0] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ T0] Console: colour dummy device 80x25
[ T0] printk: legacy console [tty0] enabled
[ T0] ACPI: Core revision 20230628
[ T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ T0] APIC: Switch to symmetric I/O mode setup
[ T0] x2apic: IRQ remapping doesn't support X2APIC mode
[ T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3101f59f5e6, max_idle_ns: 440795259996 ns
[ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 6802.13 BogoMIPS (lpj=11333020)
[ T0] x86/cpu: VMX (outside TXT) disabled by BIOS
[ T0] x86/cpu: SGX disabled by BIOS.
[ T0] CPU0: Thermal monitoring enabled (TM1)
[ T0] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ T0] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ T0] process: using mwait in idle threads
[ T0] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ T0] Spectre V2 : Mitigation: IBRS
[ T0] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ T0] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ T0] RETBleed: Mitigation: IBRS
[ T0] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ T0] Spectre V2 : User space: Mitigation: STIBP via prctl
[ T0] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ T0] MDS: Mitigation: Clear CPU buffers
[ T0] TAA: Mitigation: TSX disabled
[ T0] MMIO Stale Data: Mitigation: Clear CPU buffers
[ T0] SRBDS: Mitigation: Microcode
[ T0] GDS: Vulnerable: No microcode
[ T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ T0] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ T0] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ T0] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ T0] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ T0] Freeing SMP alternatives memory: 40K
[ T0] pid_max: default: 32768 minimum: 301
[ T0] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,ima,evm
[ T0] landlock: Up and running.
[ T0] Yama: becoming mindful.
[ T0] AppArmor: AppArmor initialized
[ T0] LSM support for eBPF active
[ T0] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ T0] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ T1] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ T1] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ T1] ... version: 4
[ T1] ... bit width: 48
[ T1] ... generic registers: 4
[ T1] ... value mask: 0000ffffffffffff
[ T1] ... max period: 00007fffffffffff
[ T1] ... fixed-purpose events: 3
[ T1] ... event mask: 000000070000000f
[ T1] signal: max sigframe size: 2032
[ T1] Estimated ratio of average max frequency by base frequency (times 1024): 1114
[ T1] rcu: Hierarchical SRCU implementation.
[ T1] rcu: Max phase no-delay instances is 1000.
[ T8] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ T1] smp: Bringing up secondary CPUs ...
[ T1] smpboot: x86: Booting SMP configuration:
[ T1] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ T1] MDS CPU bug present and SMT on, data leak possible. See for more details.
[ T1] MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
[ T1] smp: Brought up 1 node, 8 CPUs
[ T1] smpboot: Total of 8 processors activated (54420.10 BogoMIPS)
[ T64] node 0 deferred pages initialised in 34ms
[ T1] devtmpfs: initialized
[ T1] x86/mm: Memory block size: 128MB
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0xb87e1000-0xb87e1fff] (4096 bytes)
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0xc6edc000-0xc751bfff] (6553600 bytes)
[ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ T1] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ T1] pinctrl core: initialized pinctrl subsystem
[ T1] PM: RTC time: 23:01:54, date: 2024-06-12
[ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ T1] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ T1] audit: initializing netlink subsys (disabled)
[ T74] audit: type=2000 audit(1718233314.086:1): state=initialized audit_enabled=0 res=1
[ T1] thermal_sys: Registered thermal governor 'fair_share'
[ T1] thermal_sys: Registered thermal governor 'bang_bang'
[ T1] thermal_sys: Registered thermal governor 'step_wise'
[ T1] thermal_sys: Registered thermal governor 'user_space'
[ T1] cpuidle: using governor ladder
[ T1] cpuidle: using governor menu
[ T1] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ T1] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ T1] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ T1] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[ T1] PCI: Using configuration type 1 for base access
[ T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ T1] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ T1] Demotion targets for Node 0: null
[ T1] ACPI: Added _OSI(Module Device)
[ T1] ACPI: Added _OSI(Processor Device)
[ T1] ACPI: Added _OSI(3.0 _SCP Extensions)
[ T1] ACPI: Added _OSI(Processor Aggregator Device)
[ T1] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ T1] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF935626B9A800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF935A15B74800 000717 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF935A15B75000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF935626B61200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ T1] ACPI: _OSC evaluated successfully for all CPUs
[ T1] ACPI: Interpreter enabled
[ T1] ACPI: PM: (supports S0 S3 S4 S5)
[ T1] ACPI: Using IOAPIC for interrupt routing
[ T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ T1] PCI: Using E820 reservations for host bridge windows
[ T1] ACPI: Enabled 6 GPEs in block 00 to 7F
[ T1] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ T1] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ T1] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ T1] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ T1] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ T1] ACPI: \_TZ_.FN00: New power resource
[ T1] ACPI: \_TZ_.FN01: New power resource
[ T1] ACPI: \_TZ_.FN02: New power resource
[ T1] ACPI: \_TZ_.FN03: New power resource
[ T1] ACPI: \_TZ_.FN04: New power resource
[ T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ T1] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ T1] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ T1] PCI host bridge to bus 0000:00
[ T1] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ T1] pci_bus 0000:00: root bus resource [bus 00-3e]
[ T1] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 conventional PCI endpoint
[ T1] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ T1] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 conventional PCI endpoint
[ T1] pci 0000:00:14.0: BAR 0 [mem 0xf7230000-0xf723ffff 64bit]
[ T1] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ T1] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 conventional PCI endpoint
[ T1] pci 0000:00:16.0: BAR 0 [mem 0xf724e000-0xf724efff 64bit]
[ T1] pci 0000:00:16.0: PME# supported from D3hot
[ T1] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002 conventional PCI endpoint
[ T1] pci 0000:00:16.3: BAR 0 [io 0xf060-0xf067]
[ T1] pci 0000:00:16.3: BAR 1 [mem 0xf724d000-0xf724dfff]
[ T1] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 conventional PCI endpoint
[ T1] pci 0000:00:17.0: BAR 0 [mem 0xf7248000-0xf7249fff]
[ T1] pci 0000:00:17.0: BAR 1 [mem 0xf724c000-0xf724c0ff]
[ T1] pci 0000:00:17.0: BAR 2 [io 0xf050-0xf057]
[ T1] pci 0000:00:17.0: BAR 3 [io 0xf040-0xf043]
[ T1] pci 0000:00:17.0: BAR 4 [io 0xf020-0xf03f]
[ T1] pci 0000:00:17.0: BAR 5 [mem 0xf724b000-0xf724b7ff]
[ T1] pci 0000:00:17.0: PME# supported from D3hot
[ T1] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ T1] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ T1] pci 0000:00:1d.0: bridge window [io 0xd000-0xdfff]
[ T1] pci 0000:00:1d.0: bridge window [mem 0xf7100000-0xf71fffff]
[ T1] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1d.2: PCI bridge to [bus 05-06]
[ T1] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100 conventional PCI endpoint
[ T1] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 conventional PCI endpoint
[ T1] pci 0000:00:1f.2: BAR 0 [mem 0xf7244000-0xf7247fff]
[ T1] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 conventional PCI endpoint
[ T1] pci 0000:00:1f.3: BAR 0 [mem 0xf7240000-0xf7243fff 64bit]
[ T1] pci 0000:00:1f.3: BAR 4 [mem 0xf7220000-0xf722ffff 64bit]
[ T1] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ T1] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 conventional PCI endpoint
[ T1] pci 0000:00:1f.4: BAR 0 [mem 0xf724a000-0xf724a0ff 64bit]
[ T1] pci 0000:00:1f.4: BAR 4 [io 0xf000-0xf01f]
[ T1] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 conventional PCI endpoint
[ T1] pci 0000:00:1f.6: BAR 0 [mem 0xf7200000-0xf721ffff]
[ T1] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:01:00.0: [10de:13bb] type 00 class 0x030000 PCIe Legacy Endpoint
[ T1] pci 0000:01:00.0: BAR 0 [mem 0xf6000000-0xf6ffffff]
[ T1] pci 0000:01:00.0: BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
[ T1] pci 0000:01:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ T1] pci 0000:01:00.0: BAR 5 [io 0xe000-0xe07f]
[ T1] pci 0000:01:00.0: ROM [mem 0xf7000000-0xf707ffff pref]
[ T1] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ T1] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ T1] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300 PCIe Endpoint
[ T1] pci 0000:01:00.1: BAR 0 [mem 0xf7080000-0xf7083fff]
[ T1] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ T1] acpiphp: Slot [1] registered
[ T1] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ T1] acpiphp: Slot [1-1] registered
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ T1] pci 0000:04:00.0: [10ec:818b] type 00 class 0x028000 PCIe Endpoint
[ T1] pci 0000:04:00.0: BAR 0 [io 0xd000-0xd0ff]
[ T1] pci 0000:04:00.0: BAR 2 [mem 0xf7100000-0xf7103fff 64bit]
[ T1] pci 0000:04:00.0: supports D1 D2
[ T1] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ T1] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ T1] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06]
[ T1] pci 0000:05:00.0: supports D1 D2
[ T1] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ T1] pci 0000:00:1d.2: PCI bridge to [bus 05-06]
[ T1] pci_bus 0000:06: extended config space not accessible
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06]
[ T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ T1] iommu: Default domain type: Passthrough
[ T1] pps_core: LinuxPPS API ver. 1 registered
[ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ T1] PTP clock support registered
[ T1] EDAC MC: Ver: 3.0.0
[ T1] NetLabel: Initializing
[ T1] NetLabel: domain hash size = 128
[ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ T1] NetLabel: unlabeled traffic allowed by default
[ T1] mctp: management component transport protocol core
[ T1] NET: Registered PF_MCTP protocol family
[ T1] PCI: Using ACPI for IRQ routing
[ T1] PCI: pci_cache_line_size set to 64 bytes
[ T1] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ T1] e820: reserve RAM buffer [mem 0xb6a22000-0xb7ffffff]
[ T1] e820: reserve RAM buffer [mem 0xb87e1000-0xbbffffff]
[ T1] e820: reserve RAM buffer [mem 0xc55a7000-0xc7ffffff]
[ T1] e820: reserve RAM buffer [mem 0xc6edc000-0xc7ffffff]
[ T1] e820: reserve RAM buffer [mem 0xc7b00000-0xc7ffffff]
[ T1] e820: reserve RAM buffer [mem 0x836000000-0x837ffffff]
[ T1] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ T1] pci 0000:01:00.0: vgaarb: bridge control possible
[ T1] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ T1] vgaarb: loaded
[ T1] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ T1] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ T1] clocksource: Switched to clocksource tsc-early
[ T1] VFS: Disk quotas dquot_6.6.0
[ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ T1] AppArmor: AppArmor Filesystem Enabled
[ T1] pnp: PnP ACPI init
[ T1] system 00:00: [io 0x0290-0x029f] has been reserved
[ T1] pnp 00:01: [dma 0 disabled]
[ T1] pnp 00:02: [dma 0 disabled]
[ T1] pnp 00:03: [dma 0 disabled]
[ T1] system 00:04: [io 0x0680-0x069f] has been reserved
[ T1] system 00:04: [io 0xffff] has been reserved
[ T1] system 00:04: [io 0xffff] has been reserved
[ T1] system 00:04: [io 0xffff] has been reserved
[ T1] system 00:04: [io 0x1800-0x18fe] has been reserved
[ T1] system 00:04: [io 0x164e-0x164f] has been reserved
[ T1] system 00:05: [io 0x0800-0x087f] has been reserved
[ T1] system 00:07: [io 0x1854-0x1857] has been reserved
[ T1] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ T1] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ T1] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ T1] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ T1] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ T1] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ T1] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ T1] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ T1] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ T1] system 00:08: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ T1] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved
[ T1] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved
[ T1] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ T1] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ T1] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ T1] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved
[ T1] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ T1] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved
[ T1] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ T1] system 00:09: [mem 0xfe410000-0xfe7fffff] has been reserved
[ T1] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ T1] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ T1] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ T1] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[ T1] pnp: PnP ACPI: found 12 devices
[ T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ T1] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 conventional PCI endpoint
[ T1] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ T1] NET: Registered PF_INET protocol family
[ T1] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ T1] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ T1] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ T1] TCP: Hash tables configured (established 262144 bind 65536)
[ T1] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ T1] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ T1] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ T1] NET: Registered PF_XDP protocol family
[ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ T1] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ T1] pci 0000:00:1d.0: bridge window [io 0xd000-0xdfff]
[ T1] pci 0000:00:1d.0: bridge window [mem 0xf7100000-0xf71fffff]
[ T1] pci 0000:05:00.0: PCI bridge to [bus 06]
[ T1] pci 0000:00:1d.2: PCI bridge to [bus 05-06]
[ T1] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
[ T1] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ T1] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ T1] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ T1] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ T1] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ T1] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
[ T1] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ T1] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ T1] pci 0000:05:00.0: Disabling ASPM L0s/L1
[ T1] pci 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ T1] PCI: CLS 64 bytes, default 64
[ T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ T1] software IO TLB: mapped [mem 0x00000000c15a7000-0x00000000c55a7000] (64MB)
[ T68] Trying to unpack rootfs image as initramfs...
[ T1] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ T1] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ T1] RAPL PMU: hw unit of domain package 2^-14 Joules
[ T1] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ T1] Initialise system trusted keyrings
[ T1] Key type blacklist registered
[ T1] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ T1] zbud: loaded
[ T1] integrity: Platform Keyring initialized
[ T1] integrity: Machine keyring initialized
[ T1] Key type asymmetric registered
[ T1] Asymmetric key parser 'x509' registered
[ T68] Freeing initrd memory: 110328K
[ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ T1] io scheduler mq-deadline registered
[ T1] io scheduler kyber registered
[ T1] io scheduler bfq registered
[ T1] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ T1] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ T1] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ T1] 0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ T1] Non-volatile memory driver v1.3
[ T1] Linux agpgart interface v0.103
[ T1] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
[ T1] ACPI: bus type drm_connector registered
[ T1] i8042: PNP: No PS/2 controller found.
[ T1] mousedev: PS/2 mouse device common for all mice
[ T1] rtc_cmos 00:06: RTC can wake from S4
[ T1] rtc_cmos 00:06: registered as rtc0
[ T1] rtc_cmos 00:06: setting system clock to 2024-06-12T23:01:54 UTC (1718233314)
[ T1] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[ T1] intel_pstate: Intel P-state driver initializing
[ T1] intel_pstate: HWP enabled
[ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ T1] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ T1] Console: switching to colour frame buffer device 80x30
[ T1] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ T1] hid: raw HID events driver (C) Jiri Kosina
[ T1] drop_monitor: Initializing network drop monitor service
[ T1] NET: Registered PF_INET6 protocol family
[ T1] Segment Routing with IPv6
[ T1] RPL Segment Routing with IPv6
[ T1] In-situ OAM (IOAM) with IPv6
[ T1] microcode: Current revision: 0x000000f0
[ T1] microcode: Updated early from: 0x000000cc
[ T1] IPI shorthand broadcast: enabled
[ T1] sched_clock: Marking stable (558477723, 376934)->(564829960, -5975303)
[ T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ T1] registered taskstats version 1
[ T1] Loading compiled-in X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] page_owner is disabled
[ T1] Key type .fscrypt registered
[ T1] Key type fscrypt-provisioning registered
[ T1] Key type encrypted registered
[ T1] AppArmor: AppArmor sha256 policy hashing enabled
[ T1] Loading compiled-in module X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] ima: Allocated hash algorithm: sha256
[ T1] ima: No architecture policies found
[ T1] evm: Initialising EVM extended attributes:
[ T1] evm: security.selinux
[ T1] evm: security.SMACK64 (disabled)
[ T1] evm: security.SMACK64EXEC (disabled)
[ T1] evm: security.SMACK64TRANSMUTE (disabled)
[ T1] evm: security.SMACK64MMAP (disabled)
[ T1] evm: security.apparmor
[ T1] evm: security.ima
[ T1] evm: security.capability
[ T1] evm: HMAC attrs: 0x1
[ T1] PM: Magic number: 12:304:49
[ T1] memory memory214: hash matches
[ T1] memory memory81: hash matches
[ T1] RAS: Correctable Errors collector initialized.
[ T1] clk: Disabling unused clocks
[ T1] PM: genpd: Disabling unused power domains
[ T1] Freeing unused decrypted memory: 2028K
[ T1] Freeing unused kernel image (initmem) memory: 4224K
[ T1] Write protecting the kernel read-only data: 30720k
[ T1] Freeing unused kernel image (rodata/data gap) memory: 1396K
[ T1] Run /init as init process
[ T1] with arguments:
[ T1] /init
[ T1] with environment:
[ T1] HOME=/
[ T1] TERM=linux
[ T1] BOOT_IMAGE=/vmlinuz-6.9.3-1-default
[ T1] splash=silent
[ T1] systemd[1]: systemd 255.7+suse.33.g603cd1d4d8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: Running in initrd.
[ T1] systemd[1]: No hostname configured, using default hostname.
[ T1] systemd[1]: Hostname set to .
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: Queued start job for default target Initrd Default Target.
[ T1] systemd[1]: Reached target Initrd /usr File System.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target Swaps.
[ T1] systemd[1]: Reached target Timer Units.
[ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ T1] systemd[1]: Listening on Journal Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Reached target Socket Units.
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Virtual Console Setup...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ T223] systemd-journald[223]: Collecting audit messages is disabled.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ T224] i2c_dev: i2c /dev entries driver
[ T1] systemd[1]: Finished Load Kernel Modules.
[ T1] systemd[1]: Starting Apply Kernel Variables...
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev.
[ T1] systemd[1]: Reached target Preparation for Local File Systems.
[ T1] systemd[1]: Reached target Local File Systems.
[ T1] systemd[1]: Finished Apply Kernel Variables.
[ T1] systemd[1]: Started Journal Service.
[ T7] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ T7] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ T7] clocksource: Switched to clocksource tsc
[ T362] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ T362] ACPI: button: Sleep Button [SLPB]
[ T362] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ T362] ACPI: button: Power Button [PWRB]
[ T362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ T362] ACPI: button: Power Button [PWRF]
[ T387] cryptd: max_cpu_qlen set to 1000
[ T387] AVX2 version of gcm_enc/dec engaged.
[ T387] AES CTR mode by8 optimization enabled
[ T372] ACPI: bus type USB registered
[ T372] usbcore: registered new interface driver usbfs
[ T372] usbcore: registered new interface driver hub
[ T372] usbcore: registered new device driver usb
[ T393] SCSI subsystem initialized
[ T397] nvidia: loading out-of-tree module taints kernel.
[ T397] nvidia: module license 'NVIDIA' taints kernel.
[ T397] Disabling lock debugging due to kernel taint
[ T397] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ T397] nvidia: module license taints kernel.
[ T393] alua: device handler registered
[ T393] rdac: device handler registered
[ T393] emc: device handler registered
[ T372] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T372] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ T372] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ T372] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T372] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ T372] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ T372] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ T372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T372] usb usb1: Product: xHCI Host Controller
[ T372] usb usb1: Manufacturer: Linux 6.9.3-1-default xhci-hcd
[ T372] usb usb1: SerialNumber: 0000:00:14.0
[ T372] hub 1-0:1.0: USB hub found
[ T372] hub 1-0:1.0: 16 ports detected
[ T372] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[ T372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T372] usb usb2: Product: xHCI Host Controller
[ T372] usb usb2: Manufacturer: Linux 6.9.3-1-default xhci-hcd
[ T372] usb usb2: SerialNumber: 0000:00:14.0
[ T372] hub 2-0:1.0: USB hub found
[ T372] hub 2-0:1.0: 10 ports detected
[ T393] libata version 3.00 loaded.
[ T393] ahci 0000:00:17.0: version 3.0
[ T393] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ T393] ahci 0000:00:17.0: 6/6 ports implemented (port mask 0x3f)
[ T393] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ T393] scsi host0: ahci
[ T393] scsi host1: ahci
[ T393] scsi host2: ahci
[ T393] scsi host3: ahci
[ T393] scsi host4: ahci
[ T393] scsi host5: ahci
[ T393] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 126 lpm-pol 0
[ T393] ata2: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b180 irq 126 lpm-pol 0
[ T393] ata3: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b200 irq 126 lpm-pol 0
[ T393] ata4: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b280 irq 126 lpm-pol 0
[ T393] ata5: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b300 irq 126 lpm-pol 0
[ T393] ata6: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b380 irq 126 lpm-pol 0
[ T130] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ T130] usb 1-1: New USB device found, idVendor=24ae, idProduct=2000, bcdDevice=10.01
[ T130] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T130] usb 1-1: Product: RAPOO 2.4G Wireless Device
[ T130] usb 1-1: Manufacturer: RAPOO
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T397] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T397] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T484] ata1.00: ATA-9: SanDisk SD8SB8U512G1122, X4162000, max UDMA/133
[ T484] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ T484] ata1.00: Features: Dev-Sleep
[ T484] ata1.00: configured for UDMA/133
[ T68] scsi 0:0:0:0: Direct-Access ATA SanDisk SD8SB8U5 2000 PQ: 0 ANSI: 5
[ T68] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ T70] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ T70] sd 0:0:0:0: [sda] Write Protect is off
[ T70] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ T70] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ T70] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ T390] usbcore: registered new interface driver usbhid
[ T390] usbhid: USB HID core driver
[ T70] sda: sda1 sda2 sda3 sda4
[ T70] sd 0:0:0:0: [sda] Attached SCSI disk
[ T378] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:24AE:2000.0001/input/input3
[ T378] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-1/input0
[ T378] input: RAPOO RAPOO 2.4G Wireless Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:2000.0002/input/input4
[ T378] input: RAPOO RAPOO 2.4G Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:2000.0002/input/input5
[ T397] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 550.90.07 Fri May 31 09:35:42 UTC 2024
[ T508] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ T130] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ T378] input: RAPOO RAPOO 2.4G Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:2000.0002/input/input6
[ T378] hid-generic 0003:24AE:2000.0002: input,hiddev96,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-1/input1
[ T508] nvidia-uvm: Loaded the UVM driver, major device number 240.
[ T130] usb 1-2: New USB device found, idVendor=05e3, idProduct=0751, bcdDevice=14.04
[ T130] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ T130] usb 1-2: Product: USB Storage
[ T130] usb 1-2: Manufacturer: USB Storage
[ T395] usb-storage 1-2:1.0: USB Mass Storage device detected
[ T395] scsi host6: usb-storage 1-2:1.0
[ T395] usbcore: registered new interface driver usb-storage
[ T395] usbcore: registered new interface driver uas
[ T554] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 550.90.07 Fri May 31 09:30:47 UTC 2024
[ T554] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ T554] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ T554] Console: switching to colour dummy device 80x25
[ T554] nvidia 0000:01:00.0: vgaarb: deactivate vga console
[ T554] fbcon: nvidia-drmdrmfb (fb0) is primary device
[ T554] Console: switching to colour frame buffer device 240x67
[ T554] nvidia 0000:01:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
[ T10] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 1404 PQ: 0 ANSI: 6
[ T10] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ T66] sd 6:0:0:0: [sdb] 244285440 512-byte logical blocks: (125 GB/116 GiB)
[ T66] sd 6:0:0:0: [sdb] Write Protect is off
[ T66] sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ T66] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ T66] sdb: sdb1
[ T66] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ T579] EXT4-fs (sda3): orphan cleanup on readonly fs
[ T579] EXT4-fs (sda3): mounted filesystem b010a24c-725a-4410-8297-83287f4081e9 ro with ordered data mode. Quota mode: none.
[ T223] systemd-journald[223]: Received SIGTERM from PID 1 (systemd).
[ T1] systemd[1]: systemd 255.7+suse.33.g603cd1d4d8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: bpf-lsm: LSM BPF program attached
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Switch Root.
[ T1] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ T1] systemd[1]: Created slice Slice /system/getty.
[ T1] systemd[1]: Created slice Slice /system/modprobe.
[ T1] systemd[1]: Created slice Slice /system/systemd-fsck.
[ T1] systemd[1]: Created slice User and Session Slice.
[ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ T1] systemd[1]: Stopped target Switch Root.
[ T1] systemd[1]: Stopped target Initrd File Systems.
[ T1] systemd[1]: Stopped target Initrd Root File System.
[ T1] systemd[1]: Reached target Local Integrity Protected Volumes.
[ T1] systemd[1]: Reached target Remote File Systems.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target System Time Set.
[ T1] systemd[1]: Reached target Local Verity Protected Volumes.
[ T1] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ T1] systemd[1]: Listening on LVM2 poll daemon socket.
[ T1] systemd[1]: Listening on Process Core Dump Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Mounting Huge Pages File System...
[ T1] systemd[1]: Mounting POSIX Message Queue File System...
[ T1] systemd[1]: Mounting Kernel Debug File System...
[ T1] systemd[1]: Mounting Kernel Trace File System...
[ T1] systemd[1]: Starting Load AppArmor profiles...
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ T1] systemd[1]: Starting Load Kernel Module configfs...
[ T1] systemd[1]: Starting Load Kernel Module dm_mod...
[ T1] systemd[1]: Starting Load Kernel Module drm...
[ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ T1] systemd[1]: Starting Load Kernel Module fuse...
[ T1] systemd[1]: Starting Load Kernel Module loop...
[ T1] systemd[1]: plymouth-start.service: Deactivated successfully.
[ T1] systemd[1]: plymouth-start.service: Unit process 433 (plymouthd) remains running after unit stopped.
[ T1] systemd[1]: Stopped Show Plymouth Boot Screen.
[ T1] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ T1] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Plymouth switch root service.
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ T1] systemd[1]: Starting Coldplug All udev Devices...
[ T1] systemd[1]: Mounted Huge Pages File System.
[ T1] systemd[1]: Mounted POSIX Message Queue File System.
[ T1] systemd[1]: Mounted Kernel Debug File System.
[ T1] systemd[1]: Mounted Kernel Trace File System.
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module configfs.
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module drm.
[ T1] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ T633] fuse: init (API version 7.40)
[ T630] device-mapper: uevent: version 1.0.3
[ T1] systemd[1]: Mounting Kernel Configuration File System...
[ T630] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T1] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module dm_mod.
[ T634] loop: module loaded
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module fuse.
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module loop.
[ T1] systemd[1]: Mounting FUSE Control File System...
[ T1] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ T1] systemd[1]: Finished Load Kernel Modules.
[ T1] systemd[1]: Mounted Kernel Configuration File System.
[ T1] systemd[1]: Mounted FUSE Control File System.
[ T636] systemd-journald[636]: Collecting audit messages is disabled.
[ T74] audit: type=1400 audit(1718233319.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=656 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.112:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=655 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.112:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=654 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.112:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=649 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.112:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=650 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.116:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=651 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.116:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=652 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.116:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=657 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.116:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=658 comm="apparmor_parser"
[ T74] audit: type=1400 audit(1718233319.116:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=659 comm="apparmor_parser"
[ T1] systemd[1]: Started Journal Service.
[ T645] EXT4-fs (sda3): re-mounted b010a24c-725a-4410-8297-83287f4081e9 r/w. Quota mode: none.
[ T636] systemd-journald[636]: Received client request to flush runtime journal.
[ T636] systemd-journald[636]: /var/log/journal/b594f6130da8434092667a28a045251c/system.journal: Journal file uses a different sequence number ID, rotating.
[ T636] systemd-journald[636]: Rotating system journal.
[ T807] parport_pc 00:01: reported by Plug and Play ACPI
[ T807] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ T809] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:09 [mem 0xfdb00000-0xfdffffff]
[ T809] caller get_primary_reg_base+0x47/0xa0 [intel_pmc_core] mapping multiple BARs
[ T809] intel_pmc_core INT33A1:00: initialized
[ T808] EDAC ie31200: No ECC support
[ T826] thermal LNXTHERM:00: registered as thermal_zone0
[ T826] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ T826] thermal LNXTHERM:01: registered as thermal_zone1
[ T826] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ T843] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ T809] e1000e: Intel(R) PRO/1000 Network Driver
[ T809] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ T70] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ T809] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ T66] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ T66] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ T66] i2c i2c-4: Successfully instantiated SPD at 0x50
[ T66] i2c i2c-4: Successfully instantiated SPD at 0x51
[ T66] i2c i2c-4: Successfully instantiated SPD at 0x52
[ T66] i2c i2c-4: Successfully instantiated SPD at 0x53
[ T890] Adding 2097148k swap on /dev/sda2. Priority:-2 extents:1 across:2097148k SS
[ T833] asus_wmi: ASUS WMI generic driver loaded
[ T826] iTCO_vendor_support: vendor-support=0
[ T839] intel_tcc_cooling: Programmable TCC Offset detected
[ T817] ppdev: user-space parallel port driver
[ T813] ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ T813] ee1004 4-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ T813] ee1004 4-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ T809] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ T813] ee1004 4-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ T821] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ T821] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ T821] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ T919] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ T919] EXT4-fs (sda1): mounted filesystem a369c581-c264-41fd-bc87-828b8b9ccd79 r/w without journal. Quota mode: none.
[ T833] asus_wmi: Initialization: 0x0
[ T833] asus_wmi: BIOS WMI version: 0.9
[ T833] asus_wmi: SFUN value: 0x0
[ T833] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ T826] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ T826] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ T833] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ T21] intel_rapl_common: Found RAPL domain package
[ T21] intel_rapl_common: Found RAPL domain core
[ T21] intel_rapl_common: Found RAPL domain dram
[ T838] snd_hda_intel 0000:01:00.1: Disabling MSI
[ T838] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ T920] EXT4-fs (sda4): mounted filesystem 0f45877f-c857-424e-a83f-5b1f0121e560 r/w with ordered data mode. Quota mode: none.
[ T809] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:8b:cd:7e:46:bf
[ T809] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ T809] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ T823] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ T496] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ T496] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ T496] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ T496] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ T939] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ T939] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ T939] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ T939] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ T939] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ T939] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ T939] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ T939] snd_hda_codec_realtek hdaudioC0D0: Line=0x15
[ T130] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ T130] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ T130] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ T130] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ T130] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ T821] rtl8192ee: Using firmware rtlwifi/rtl8192eefw.bin
[ T821] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ T821] rtlwifi: rtlwifi: wireless switch is on
[ T837] rtl8192ee 0000:04:00.0 wlp4s0: renamed from wlan0
[ T1198] NET: Registered PF_QIPCRTR protocol family
[ T1321] NET: Registered PF_PACKET protocol family
[ T342] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T636] systemd-journald[636]: /var/log/journal/b594f6130da8434092667a28a045251c/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ T2002] warning: `opensuse-welcom' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ T5031] PM: suspend entry (deep)
[ T5031] Filesystems sync: 0.011 seconds
[ T5031] Freezing user space processes
[ T5031] Freezing user space processes completed (elapsed 0.001 seconds)
[ T5031] OOM killer disabled.
[ T5031] Freezing remaining freezable tasks
[ T5031] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
[ T5031] printk: Suspending console(s) (use no_console_suspend to debug)
[ T5031] serial 00:03: disabled
[ T5031] serial 00:02: disabled
[ T5031] parport_pc 00:01: disabled
[ T5044] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[ T5046] e1000e: EEE TX LPI TIMER: 00000011
[ T5031] ACPI: PM: Preparing to enter system sleep state S3
[ T5031] ACPI: PM: Saving platform NVS memory
[ T5031] Disabling non-boot CPUs ...
[ T5031] smpboot: CPU 1 is now offline
[ T5031] smpboot: CPU 2 is now offline
[ T5031] smpboot: CPU 3 is now offline
[ T5031] smpboot: CPU 4 is now offline
[ T5031] smpboot: CPU 5 is now offline
[ T5031] smpboot: CPU 6 is now offline
[ T5031] smpboot: CPU 7 is now offline
[ T5031] ACPI: PM: Low-level resume complete
[ T5031] ACPI: PM: Restoring platform NVS memory
[ T5031] Enabling non-boot CPUs ...
[ T5031] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ T5031] CPU1 is up
[ T5031] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ T5031] CPU2 is up
[ T5031] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ T5031] CPU3 is up
[ T5031] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ T5031] CPU4 is up
[ T5031] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ T5031] CPU5 is up
[ T5031] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ T5031] CPU6 is up
[ T5031] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ T5031] CPU7 is up
[ T5031] ACPI: PM: Waking up from system sleep state S3
[ T5052] rtlwifi: rtlwifi: wireless switch is on
[ T5031] parport_pc 00:01: activated
[ T5031] serial 00:02: activated
[ T5031] serial 00:03: activated
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T5057] sd 0:0:0:0: [sda] Starting disk
[ T484] ata1.00: configured for UDMA/133
[ T5031] OOM killer enabled.
[ T5031] Restarting tasks ...
[ T5051] pci_bus 0000:06: Allocating resources
[ T5051] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ T5051] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[ T5051] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ T5051] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ T5051] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[ T5051] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[ T5051] pci 0000:05:00.0: PCI bridge to [bus 06]
[ T5031] done.
[ T5031] random: crng reseeded on system resumption
[ T5031] PM: suspend exit
[ T5096] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ T4921] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ C3] perf: interrupt took too long (2536 > 2500), lowering kernel.perf_event_max_sample_rate to 78600
[ C3] perf: interrupt took too long (3183 > 3170), lowering kernel.perf_event_max_sample_rate to 62700
[T17490] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T17490] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[T17879] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T17879] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[T17879] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T17879] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ C3] perf: interrupt took too long (3986 > 3978), lowering kernel.perf_event_max_sample_rate to 50100
[T18853] PM: suspend entry (deep)
[T18853] Filesystems sync: 0.008 seconds
[T18853] Freezing user space processes
[T18853] Freezing user space processes completed (elapsed 0.001 seconds)
[T18853] OOM killer disabled.
[T18853] Freezing remaining freezable tasks
[T18853] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[T18853] printk: Suspending console(s) (use no_console_suspend to debug)
[T18853] serial 00:03: disabled
[T18853] serial 00:02: disabled
[T18853] parport_pc 00:01: disabled
[T18866] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[T18866] e1000e: EEE TX LPI TIMER: 00000011
[T18853] ACPI: PM: Preparing to enter system sleep state S3
[T18853] ACPI: PM: Saving platform NVS memory
[T18853] Disabling non-boot CPUs ...
[T18853] smpboot: CPU 1 is now offline
[T18853] smpboot: CPU 2 is now offline
[T18853] smpboot: CPU 3 is now offline
[T18853] smpboot: CPU 4 is now offline
[T18853] smpboot: CPU 5 is now offline
[T18853] smpboot: CPU 6 is now offline
[T18853] smpboot: CPU 7 is now offline
[T18853] ACPI: PM: Low-level resume complete
[T18853] ACPI: PM: Restoring platform NVS memory
[T18853] Enabling non-boot CPUs ...
[T18853] smpboot: Booting Node 0 Processor 1 APIC 0x2
[T18853] CPU1 is up
[T18853] smpboot: Booting Node 0 Processor 2 APIC 0x4
[T18853] CPU2 is up
[T18853] smpboot: Booting Node 0 Processor 3 APIC 0x6
[T18853] CPU3 is up
[T18853] smpboot: Booting Node 0 Processor 4 APIC 0x1
[T18853] CPU4 is up
[T18853] smpboot: Booting Node 0 Processor 5 APIC 0x3
[T18853] CPU5 is up
[T18853] smpboot: Booting Node 0 Processor 6 APIC 0x5
[T18853] CPU6 is up
[T18853] smpboot: Booting Node 0 Processor 7 APIC 0x7
[T18853] CPU7 is up
[T18853] ACPI: PM: Waking up from system sleep state S3
[T18865] rtlwifi: rtlwifi: wireless switch is on
[T18853] parport_pc 00:01: activated
[T18853] serial 00:02: activated
[T18853] serial 00:03: activated
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[T18637] sd 0:0:0:0: [sda] Starting disk
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T484] ata1.00: configured for UDMA/133
[T18853] OOM killer enabled.
[T18853] Restarting tasks ...
[T18873] pci_bus 0000:06: Allocating resources
[T18873] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[T18873] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[T18873] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T18873] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T18873] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T18873] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T18873] pci 0000:05:00.0: PCI bridge to [bus 06]
[T18853] done.
[T18853] random: crng reseeded on system resumption
[T18853] PM: suspend exit
[T18930] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T18650] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T1273] wlp4s0: authenticate with 70:4f:57:6c:05:8a (local address=50:3e:aa:7a:86:7a)
[ T1273] wlp4s0: send auth to 70:4f:57:6c:05:8a (try 1/3)
[T18887] wlp4s0: authenticated
[T18887] wlp4s0: associate with 70:4f:57:6c:05:8a (try 1/3)
[T18887] wlp4s0: RX AssocResp from 70:4f:57:6c:05:8a (capab=0x431 status=0 aid=1)
[T18887] wlp4s0: associated
[ C3] perf: interrupt took too long (4984 > 4982), lowering kernel.perf_event_max_sample_rate to 39900
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T19991] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T1273] wlp4s0: deauthenticating from 70:4f:57:6c:05:8a by local choice (Reason: 3=DEAUTH_LEAVING)
[T23697] PM: suspend entry (deep)
[T23697] Filesystems sync: 0.025 seconds
[T23697] Freezing user space processes
[T23697] Freezing user space processes completed (elapsed 0.001 seconds)
[T23697] OOM killer disabled.
[T23697] Freezing remaining freezable tasks
[T23697] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
[T23697] printk: Suspending console(s) (use no_console_suspend to debug)
[T23697] serial 00:03: disabled
[T23697] serial 00:02: disabled
[T23697] parport_pc 00:01: disabled
[T23711] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[T23713] e1000e: EEE TX LPI TIMER: 00000011
[T23697] ACPI: PM: Preparing to enter system sleep state S3
[T23697] ACPI: PM: Saving platform NVS memory
[T23697] Disabling non-boot CPUs ...
[T23697] smpboot: CPU 1 is now offline
[T23697] smpboot: CPU 2 is now offline
[T23697] smpboot: CPU 3 is now offline
[T23697] smpboot: CPU 4 is now offline
[T23697] smpboot: CPU 5 is now offline
[T23697] smpboot: CPU 6 is now offline
[T23697] smpboot: CPU 7 is now offline
[T23697] ACPI: PM: Low-level resume complete
[T23697] ACPI: PM: Restoring platform NVS memory
[T23697] Enabling non-boot CPUs ...
[T23697] smpboot: Booting Node 0 Processor 1 APIC 0x2
[T23697] CPU1 is up
[T23697] smpboot: Booting Node 0 Processor 2 APIC 0x4
[T23697] CPU2 is up
[T23697] smpboot: Booting Node 0 Processor 3 APIC 0x6
[T23697] CPU3 is up
[T23697] smpboot: Booting Node 0 Processor 4 APIC 0x1
[T23697] CPU4 is up
[T23697] smpboot: Booting Node 0 Processor 5 APIC 0x3
[T23697] CPU5 is up
[T23697] smpboot: Booting Node 0 Processor 6 APIC 0x5
[T23697] CPU6 is up
[T23697] smpboot: Booting Node 0 Processor 7 APIC 0x7
[T23697] CPU7 is up
[T23697] ACPI: PM: Waking up from system sleep state S3
[T23708] rtlwifi: rtlwifi: wireless switch is on
[T23697] parport_pc 00:01: activated
[T23697] serial 00:02: activated
[T23697] serial 00:03: activated
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[T23456] sd 0:0:0:0: [sda] Starting disk
[ T484] ata1.00: configured for UDMA/133
[T23697] OOM killer enabled.
[T23697] Restarting tasks ...
[T23751] pci_bus 0000:06: Allocating resources
[T23751] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[T23751] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[T23751] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T23751] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T23751] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T23751] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T23751] pci 0000:05:00.0: PCI bridge to [bus 06]
[T23697] done.
[T23697] random: crng reseeded on system resumption
[T23697] PM: suspend exit
[T23782] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T23400] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T1273] wlp4s0: authenticate with 70:4f:57:6c:05:8a (local address=50:3e:aa:7a:86:7a)
[ T1273] wlp4s0: send auth to 70:4f:57:6c:05:8a (try 1/3)
[T23749] wlp4s0: authenticated
[T23749] wlp4s0: associate with 70:4f:57:6c:05:8a (try 1/3)
[T23749] wlp4s0: RX AssocResp from 70:4f:57:6c:05:8a (capab=0x431 status=0 aid=1)
[T23749] wlp4s0: associated
[ T1273] wlp4s0: deauthenticating from 70:4f:57:6c:05:8a by local choice (Reason: 3=DEAUTH_LEAVING)
[T24643] PM: suspend entry (deep)
[T24643] Filesystems sync: 0.017 seconds
[T24643] Freezing user space processes
[T24643] Freezing user space processes completed (elapsed 0.002 seconds)
[T24643] OOM killer disabled.
[T24643] Freezing remaining freezable tasks
[T24643] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[T24643] printk: Suspending console(s) (use no_console_suspend to debug)
[T24643] serial 00:03: disabled
[T24643] serial 00:02: disabled
[T24643] parport_pc 00:01: disabled
[T24656] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[T24659] e1000e: EEE TX LPI TIMER: 00000011
[T24643] ACPI: PM: Preparing to enter system sleep state S3
[T24643] ACPI: PM: Saving platform NVS memory
[T24643] Disabling non-boot CPUs ...
[T24643] smpboot: CPU 1 is now offline
[T24643] smpboot: CPU 2 is now offline
[T24643] smpboot: CPU 3 is now offline
[T24643] smpboot: CPU 4 is now offline
[T24643] smpboot: CPU 5 is now offline
[T24643] smpboot: CPU 6 is now offline
[T24643] smpboot: CPU 7 is now offline
[T24643] ACPI: PM: Low-level resume complete
[T24643] ACPI: PM: Restoring platform NVS memory
[T24643] Enabling non-boot CPUs ...
[T24643] smpboot: Booting Node 0 Processor 1 APIC 0x2
[T24643] CPU1 is up
[T24643] smpboot: Booting Node 0 Processor 2 APIC 0x4
[T24643] CPU2 is up
[T24643] smpboot: Booting Node 0 Processor 3 APIC 0x6
[T24643] CPU3 is up
[T24643] smpboot: Booting Node 0 Processor 4 APIC 0x1
[T24643] CPU4 is up
[T24643] smpboot: Booting Node 0 Processor 5 APIC 0x3
[T24643] CPU5 is up
[T24643] smpboot: Booting Node 0 Processor 6 APIC 0x5
[T24643] CPU6 is up
[T24643] smpboot: Booting Node 0 Processor 7 APIC 0x7
[T24643] CPU7 is up
[T24643] ACPI: PM: Waking up from system sleep state S3
[T24663] rtlwifi: rtlwifi: wireless switch is on
[T24643] parport_pc 00:01: activated
[T24643] serial 00:02: activated
[T24643] serial 00:03: activated
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[T24209] sd 0:0:0:0: [sda] Starting disk
[ T484] ata1.00: configured for UDMA/133
[T24665] pci_bus 0000:06: Allocating resources
[T24665] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[T24665] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[T24643] OOM killer enabled.
[T24643] Restarting tasks ...
[T24665] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T24665] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T24665] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T24665] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T24665] pci 0000:05:00.0: PCI bridge to [bus 06]
[T24643] done.
[T24643] random: crng reseeded on system resumption
[T24643] PM: suspend exit
[T24706] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T24301] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T1273] wlp4s0: authenticate with 70:4f:57:6c:05:8a (local address=50:3e:aa:7a:86:7a)
[ T1273] wlp4s0: send auth to 70:4f:57:6c:05:8a (try 1/3)
[T24652] wlp4s0: authenticated
[T24652] wlp4s0: associate with 70:4f:57:6c:05:8a (try 1/3)
[T24652] wlp4s0: RX AssocResp from 70:4f:57:6c:05:8a (capab=0x431 status=0 aid=1)
[T24652] wlp4s0: associated
[ T1273] wlp4s0: deauthenticating from 70:4f:57:6c:05:8a by local choice (Reason: 3=DEAUTH_LEAVING)
[T25453] PM: suspend entry (deep)
[T25453] Filesystems sync: 0.011 seconds
[T25453] Freezing user space processes
[T25453] Freezing user space processes completed (elapsed 0.001 seconds)
[T25453] OOM killer disabled.
[T25453] Freezing remaining freezable tasks
[T25453] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[T25453] printk: Suspending console(s) (use no_console_suspend to debug)
[T25453] serial 00:03: disabled
[T25453] serial 00:02: disabled
[T25453] parport_pc 00:01: disabled
[T25466] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[T25469] e1000e: EEE TX LPI TIMER: 00000011
[T25453] ACPI: PM: Preparing to enter system sleep state S3
[T25453] ACPI: PM: Saving platform NVS memory
[T25453] Disabling non-boot CPUs ...
[T25453] smpboot: CPU 1 is now offline
[T25453] smpboot: CPU 2 is now offline
[T25453] smpboot: CPU 3 is now offline
[T25453] smpboot: CPU 4 is now offline
[T25453] smpboot: CPU 5 is now offline
[T25453] smpboot: CPU 6 is now offline
[T25453] smpboot: CPU 7 is now offline
[T25453] ACPI: PM: Low-level resume complete
[T25453] ACPI: PM: Restoring platform NVS memory
[T25453] Enabling non-boot CPUs ...
[T25453] smpboot: Booting Node 0 Processor 1 APIC 0x2
[T25453] CPU1 is up
[T25453] smpboot: Booting Node 0 Processor 2 APIC 0x4
[T25453] CPU2 is up
[T25453] smpboot: Booting Node 0 Processor 3 APIC 0x6
[T25453] CPU3 is up
[T25453] smpboot: Booting Node 0 Processor 4 APIC 0x1
[T25453] CPU4 is up
[T25453] smpboot: Booting Node 0 Processor 5 APIC 0x3
[T25453] CPU5 is up
[T25453] smpboot: Booting Node 0 Processor 6 APIC 0x5
[T25453] CPU6 is up
[T25453] smpboot: Booting Node 0 Processor 7 APIC 0x7
[T25453] CPU7 is up
[T25453] ACPI: PM: Waking up from system sleep state S3
[T25497] rtlwifi: rtlwifi: wireless switch is on
[T25453] parport_pc 00:01: activated
[T25453] serial 00:02: activated
[T25453] serial 00:03: activated
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[T25138] sd 0:0:0:0: [sda] Starting disk
[ T484] ata1.00: configured for UDMA/133
[T25453] OOM killer enabled.
[T25453] Restarting tasks ...
[T25475] pci_bus 0000:06: Allocating resources
[T25475] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[T25475] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[T25475] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T25475] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T25475] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T25475] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T25475] pci 0000:05:00.0: PCI bridge to [bus 06]
[T25453] done.
[T25453] random: crng reseeded on system resumption
[T25453] PM: suspend exit
[T25516] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[T25133] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ T1273] wlp4s0: authenticate with 70:4f:57:6c:05:8a (local address=50:3e:aa:7a:86:7a)
[ T1273] wlp4s0: send auth to 70:4f:57:6c:05:8a (try 1/3)
[T25475] wlp4s0: authenticated
[T25475] wlp4s0: associate with 70:4f:57:6c:05:8a (try 1/3)
[T25475] wlp4s0: RX AssocResp from 70:4f:57:6c:05:8a (capab=0x431 status=0 aid=1)
[T25475] wlp4s0: associated
[ T1273] wlp4s0: deauthenticating from 70:4f:57:6c:05:8a by local choice (Reason: 3=DEAUTH_LEAVING)
[T26641] PM: suspend entry (deep)
[T26641] Filesystems sync: 0.047 seconds
[T26641] Freezing user space processes
[T26641] Freezing user space processes completed (elapsed 0.001 seconds)
[T26641] OOM killer disabled.
[T26641] Freezing remaining freezable tasks
[T26641] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[T26641] printk: Suspending console(s) (use no_console_suspend to debug)
[T26641] serial 00:03: disabled
[T26641] serial 00:02: disabled
[T26641] parport_pc 00:01: disabled
[T26654] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ T484] ata1.00: Entering standby power mode
[T26657] e1000e: EEE TX LPI TIMER: 00000011
[T26641] ACPI: PM: Preparing to enter system sleep state S3
[T26641] ACPI: PM: Saving platform NVS memory
[T26641] Disabling non-boot CPUs ...
[T26641] smpboot: CPU 1 is now offline
[T26641] smpboot: CPU 2 is now offline
[T26641] smpboot: CPU 3 is now offline
[T26641] smpboot: CPU 4 is now offline
[T26641] smpboot: CPU 5 is now offline
[T26641] smpboot: CPU 6 is now offline
[T26641] smpboot: CPU 7 is now offline
[T26641] ACPI: PM: Low-level resume complete
[T26641] ACPI: PM: Restoring platform NVS memory
[T26641] Enabling non-boot CPUs ...
[T26641] smpboot: Booting Node 0 Processor 1 APIC 0x2
[T26641] CPU1 is up
[T26641] smpboot: Booting Node 0 Processor 2 APIC 0x4
[T26641] CPU2 is up
[T26641] smpboot: Booting Node 0 Processor 3 APIC 0x6
[T26641] CPU3 is up
[T26641] smpboot: Booting Node 0 Processor 4 APIC 0x1
[T26641] CPU4 is up
[T26641] smpboot: Booting Node 0 Processor 5 APIC 0x3
[T26641] CPU5 is up
[T26641] smpboot: Booting Node 0 Processor 6 APIC 0x5
[T26641] CPU6 is up
[T26641] smpboot: Booting Node 0 Processor 7 APIC 0x7
[T26641] CPU7 is up
[T26641] ACPI: PM: Waking up from system sleep state S3
[T26672] rtlwifi: rtlwifi: wireless switch is on
[T26641] parport_pc 00:01: activated
[T26641] serial 00:02: activated
[T26641] serial 00:03: activated
[ T484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T492] ata5: SATA link down (SStatus 4 SControl 300)
[ T490] ata4: SATA link down (SStatus 4 SControl 300)
[ T494] ata6: SATA link down (SStatus 4 SControl 300)
[ T488] ata3: SATA link down (SStatus 4 SControl 300)
[ T486] ata2: SATA link down (SStatus 4 SControl 300)
[T24707] sd 0:0:0:0: [sda] Starting disk
[ T484] ata1.00: configured for UDMA/133
[T26641] OOM killer enabled.
[T26641] Restarting tasks ...
[T26651] pci_bus 0000:06: Allocating resources
[T26651] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[T26651] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[T26651] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T26651] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000]: failed to assign
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[T26651] pci 0000:05:00.0: bridge window [io size 0x1000]: can't assign; no space
[T26651] pci 0000:05:00.0: bridge window [io size 0x1000]: failed to assign
[T26651] pci 0000:05:00.0: PCI bridge to [bus 06]
[T26641] done.
[T26641] random: crng reseeded on system resumption
[T26641] PM: suspend exit
[T26721] sdb: sdb1
[ T1200] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ T1273] wlp4s0: authenticate with 70:4f:57:6c:05:8a (local address=50:3e:aa:7a:86:7a)
[ T1273] wlp4s0: send auth to 70:4f:57:6c:05:8a (try 1/3)
[T26651] wlp4s0: authenticated
[T26651] wlp4s0: associate with 70:4f:57:6c:05:8a (try 1/3)
[T26651] wlp4s0: RX AssocResp from 70:4f:57:6c:05:8a (capab=0x431 status=0 aid=1)
[T26651] wlp4s0: associated
[T26370] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ C2] perf: interrupt took too long (6277 > 6230), lowering kernel.perf_event_max_sample_rate to 31800