dmesg - BuildGcc
ntfs3: sda3: ino=38421, Correct links count -> 1.
ntfs3: sda3: ino=84262, Correct links count -> 1.
ntfs3: sda3: ino=8427a, Correct links count -> 1.
ntfs3: sda3: ino=14db, Correct links count -> 1.
ntfs3: 11 callbacks suppressed
ntfs3: sda3: ino=6d1, Correct links count -> 1.
ntfs3: sda3: ino=6f3, Correct links count -> 1.
ntfs3: sda3: ino=b52, Correct links count -> 1.
ntfs3: sda3: ino=b7b, Correct links count -> 1.
ntfs3: sda3: ino=ce6, Correct links count -> 1.
ntfs3: sda3: ino=d70, Correct links count -> 1.
ntfs3: sda3: ino=d8a, Correct links count -> 1.
ntfs3: sda3: ino=e4d, Correct links count -> 1.
ntfs3: sda3: ino=e57, Correct links count -> 1.
ntfs3: sda3: ino=e62, Correct links count -> 1.
ntfs3: 37 callbacks suppressed
ntfs3: sda3: ino=8d60, Correct links count -> 1.
ntfs3: sda3: ino=8ddc, Correct links count -> 1.
ntfs3: sda3: ino=8e38, Correct links count -> 1.
ntfs3: sda3: ino=8ea4, Correct links count -> 1.
ntfs3: sda3: ino=8ef0, Correct links count -> 1.
ntfs3: sda3: ino=9046, Correct links count -> 1.
ntfs3: sda3: ino=9669, Correct links count -> 1.
ntfs3: sda3: ino=985b, Correct links count -> 1.
ntfs3: sda3: ino=a598, Correct links count -> 1.
ntfs3: sda3: ino=a9a4, Correct links count -> 1.
ntfs3: 2 callbacks suppressed
ntfs3: sda3: ino=1186e, Correct links count -> 1.
ntfs3: sda3: ino=178f7, Correct links count -> 1.
ntfs3: sda3: ino=492d0, Correct links count -> 1.
ntfs3: sda3: ino=38fa9, Correct links count -> 1.
ntfs3: sda3: ino=7993c, Correct links count -> 1.
INFO: task evince:15899 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:evince state:D stack:0 pid:15899 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
? filemap_map_pages+0x4bd/0x5c0
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
? finish_task_switch.isra.0+0x89/0x2e0
arch_do_signal_or_restart+0x42/0x280
irqentry_exit_to_user_mode+0x11b/0x190
irqentry_exit+0x43/0x50
exc_page_fault+0x94/0x1b0
asm_exc_page_fault+0x27/0x30
RIP: 0033:0x731aac047a7f
RSP: 002b:00007ffcef70e630 EFLAGS: 00010206
RAX: 0000731aac07b054 RBX: 0000731aac077238 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000731a880027d0
RBP: 0000731a880027d0 R08: 0000000000000000 R09: 0000000000000007
R10: 00005954020df2f0 R11: 80836e42ffb33464 R12: 0000731aac077230
R13: 000059540242ccd0 R14: 0000000000000000 R15: 0000000000000000
INFO: task pool-spawner:15901 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:pool-spawner state:D stack:0 pid:15901 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
? futex_wait+0x74/0x120
arch_do_signal_or_restart+0x42/0x280
syscall_exit_to_user_mode+0x11e/0x1e0
do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
? syscall_exit_to_user_mode+0x8e/0x1e0
? do_syscall_64+0x83/0x140
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x731ab2125cfd
RSP: 002b:0000731aae1ffa68 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 0000595401c6a260 RCX: 0000731ab2125cfd
RDX: 0000000000000002 RSI: 0000000000000080 RDI: 0000595401c6a270
RBP: 0000731aae200648 R08: 0000000000000000 R09: 0000595401c6a260
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 0000595401c6a270 R14: 0000000000000000 R15: 0000731ab327e7a2
INFO: task gmain:15902 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:gmain state:D stack:0 pid:15902 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
? __pfx_pollwake+0x10/0x10
? __pfx_pollwake+0x10/0x10
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
arch_do_signal_or_restart+0x42/0x280
syscall_exit_to_user_mode+0x11e/0x1e0
do_syscall_64+0x83/0x140
? ksys_read+0xe6/0x100
? syscall_exit_to_user_mode+0x8e/0x1e0
? do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x731ab211a20f
RSP: 002b:0000731aad7ffa80 EFLAGS: 00000293 ORIG_RAX: 0000000000000007
RAX: fffffffffffffdfc RBX: 0000000000000002 RCX: 0000731ab211a20f
RDX: 00000000ffffffff RSI: 0000000000000002 RDI: 0000595401c720e0
RBP: 0000595401c71ed0 R08: 0000000000000000 R09: 000000007fffffff
R10: 0000595401c71ed0 R11: 0000000000000293 R12: 000000007fffffff
R13: 0000731ab3224050 R14: 0000000000000002 R15: 0000595401c720e0
INFO: task dconf worker:15904 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:dconf worker state:D stack:0 pid:15904 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
? __pfx_pollwake+0x10/0x10
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
arch_do_signal_or_restart+0x42/0x280
syscall_exit_to_user_mode+0x11e/0x1e0
do_syscall_64+0x83/0x140
? syscall_exit_to_user_mode+0x8e/0x1e0
? do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x731ab211a20f
RSP: 002b:0000731aa7dffa80 EFLAGS: 00000293 ORIG_RAX: 0000000000000007
RAX: fffffffffffffdfc RBX: 0000000000000001 RCX: 0000731ab211a20f
RDX: 00000000ffffffff RSI: 0000000000000001 RDI: 0000731a94000b90
RBP: 0000595401c84d80 R08: 0000000000000000 R09: 000000007fffffff
R10: 0000595401c84d80 R11: 0000000000000293 R12: 000000007fffffff
R13: 0000731ab3224050 R14: 0000000000000001 R15: 0000731a94000b90
INFO: task gdbus:15905 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:gdbus state:D stack:0 pid:15905 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
? __pfx_pollwake+0x10/0x10
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
arch_do_signal_or_restart+0x42/0x280
syscall_exit_to_user_mode+0x11e/0x1e0
do_syscall_64+0x83/0x140
? ksys_read+0xe6/0x100
? syscall_exit_to_user_mode+0x8e/0x1e0
? do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
? sysvec_apic_timer_interrupt+0x4b/0xd0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x731ab211a20f
RSP: 002b:0000731aa73ffa80 EFLAGS: 00000293 ORIG_RAX: 0000000000000007
RAX: fffffffffffffdfc RBX: 0000000000000002 RCX: 0000731ab211a20f
RDX: 00000000ffffffff RSI: 0000000000000002 RDI: 0000731a90000b90
RBP: 0000731a9c005b40 R08: 0000000000000000 R09: 000000007fffffff
R10: 0000731a9c005b40 R11: 0000000000000293 R12: 000000007fffffff
R13: 0000731ab3224050 R14: 0000000000000002 R15: 0000731a90000b90
INFO: task threaded-ml:15930 blocked for more than 120 seconds.
Not tainted 6.8.0 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:threaded-ml state:D stack:0 pid:15930 tgid:15899 ppid:1818 flags:0x00004002
Call Trace:
__schedule+0x423/0x1780
? try_to_wake_up+0x227/0x700
? __pfx_pollwake+0x10/0x10
schedule+0x33/0x110
do_exit+0x119/0xb90
do_group_exit+0x35/0x90
get_signal+0xb0c/0xb10
arch_do_signal_or_restart+0x42/0x280
syscall_exit_to_user_mode+0x11e/0x1e0
do_syscall_64+0x83/0x140
? ksys_read+0xe6/0x100
? syscall_exit_to_user_mode+0x8e/0x1e0
? do_syscall_64+0x83/0x140
? do_syscall_64+0x83/0x140
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x731ab211a20f
RSP: 002b:0000731a9bdff8b0 EFLAGS: 00000293 ORIG_RAX: 0000000000000007
RAX: fffffffffffffdfc RBX: 0000595402386910 RCX: 0000731ab211a20f
RDX: 00000000ffffffff RSI: 0000000000000002 RDI: 0000731a840201b0
RBP: 0000731a840201b0 R08: 0000000000000000 R09: 0000595402386910
R10: 000059540205a360 R11: 0000000000000293 R12: 0000000000000002
R13: 00000000ffffffff R14: 00007ffcef70e0a0 R15: 0000731a9b600000
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
32-bit emulation disabled. You can reenable with ia32_emulation=on
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712502287.608:160): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2437 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1712502287.660:161): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2437 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1712502288.052:162): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.snap-store pid=2437 comm="pool-org.gnome." exe="/snap/snap-store/1113/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x777f3913fa9b code=0x50000
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ntfs3: sda3: ino=b161, Correct links count -> 1.
ntfs3: sda3: ino=b2d2, Correct links count -> 1.
ntfs3: sda3: ino=b325, Correct links count -> 1.
ntfs3: sda3: ino=b9a4, Correct links count -> 1.
ntfs3: sda3: ino=bd44, Correct links count -> 1.
ntfs3: sda3: ino=bdc5, Correct links count -> 1.
ntfs3: sda3: ino=bf4c, Correct links count -> 1.
ntfs3: sda3: ino=cdb1, Correct links count -> 1.
ntfs3: sda3: ino=cec2, Correct links count -> 1.
ntfs3: sda3: ino=d407, Correct links count -> 1.
ntfs3: 7 callbacks suppressed
ntfs3: sda3: ino=1049, Correct links count -> 1.
ntfs3: sda3: ino=14c9, Correct links count -> 1.
ntfs3: sda3: ino=1c19, Correct links count -> 1.
ntfs3: sda3: ino=22d7, Correct links count -> 1.
ntfs3: sda3: ino=262b, Correct links count -> 1.
ntfs3: sda3: ino=283f, Correct links count -> 1.
ntfs3: sda3: ino=2e6b, Correct links count -> 1.
ntfs3: sda3: ino=2eb8, Correct links count -> 1.
ntfs3: sda3: ino=35f0, Correct links count -> 1.
ntfs3: sda3: ino=3bf7, Correct links count -> 1.
ntfs3: 14 callbacks suppressed
ntfs3: sda3: ino=108b2, Correct links count -> 1.
ntfs3: sda3: ino=10c02, Correct links count -> 1.
ntfs3: sda3: ino=10e96, Correct links count -> 1.
ntfs3: sda3: ino=1167e, Correct links count -> 1.
ntfs3: sda3: ino=11950, Correct links count -> 1.
ntfs3: sda3: ino=1215b, Correct links count -> 1.
ntfs3: sda3: ino=12646, Correct links count -> 1.
ntfs3: sda3: ino=12756, Correct links count -> 1.
ntfs3: sda3: ino=1293e, Correct links count -> 1.
ntfs3: sda3: ino=131db, Correct links count -> 1.
ntfs3: 7 callbacks suppressed
ntfs3: sda3: ino=183a1, Correct links count -> 1.
ntfs3: sda3: ino=1855c, Correct links count -> 1.
ntfs3: sda3: ino=18e46, Correct links count -> 1.
ntfs3: sda3: ino=1cd0e, Correct links count -> 1.
ntfs3: sda3: ino=1d2b9, Correct links count -> 1.
ntfs3: sda3: ino=1d487, Correct links count -> 1.
ntfs3: sda3: ino=1d58b, Correct links count -> 1.
ntfs3: sda3: ino=1d7ac, Correct links count -> 1.
ntfs3: sda3: ino=1dc05, Correct links count -> 1.
ntfs3: sda3: ino=1eb76, Correct links count -> 1.
ntfs3: sda3: ino=1eb7c, Correct links count -> 1.
ntfs3: 16 callbacks suppressed
ntfs3: sda3: ino=24b73, Correct links count -> 1.
ntfs3: sda3: ino=25d9a, Correct links count -> 1.
ntfs3: sda3: ino=27930, Correct links count -> 1.
ntfs3: sda3: ino=27b2e, Correct links count -> 1.
ntfs3: sda3: ino=27c53, Correct links count -> 1.
ntfs3: sda3: ino=28151, Correct links count -> 1.
ntfs3: sda3: ino=28268, Correct links count -> 1.
ntfs3: sda3: ino=2829f, Correct links count -> 1.
ntfs3: sda3: ino=286c2, Correct links count -> 1.
ntfs3: sda3: ino=29956, Correct links count -> 1.
ntfs3: 12 callbacks suppressed
ntfs3: sda3: ino=2d83d, Correct links count -> 1.
ntfs3: sda3: ino=2d840, Correct links count -> 1.
ntfs3: sda3: ino=34501, Correct links count -> 1.
ntfs3: sda3: ino=236a8, Correct links count -> 1.
ntfs3: sda3: ino=3d621, Correct links count -> 1.
ntfs3: sda3: ino=3d62e, Correct links count -> 1.
ntfs3: sda3: ino=359f4, Correct links count -> 1.
ntfs3: sda3: ino=367c8, Correct links count -> 1.
ntfs3: sda3: ino=36c63, Correct links count -> 1.
ntfs3: sda3: ino=36eeb, Correct links count -> 1.
ntfs3: 3 callbacks suppressed
ntfs3: sda3: ino=37e56, Correct links count -> 1.
ntfs3: sda3: ino=389a5, Correct links count -> 1.
ntfs3: sda3: ino=39ba0, Correct links count -> 1.
ntfs3: sda3: ino=3b04f, Correct links count -> 1.
ntfs3: sda3: ino=3b2a6, Correct links count -> 1.
ntfs3: sda3: ino=3ba8a, Correct links count -> 1.
ntfs3: sda3: ino=3bafc, Correct links count -> 1.
ntfs3: sda3: ino=3ccfd, Correct links count -> 1.
ntfs3: sda3: ino=3cd9a, Correct links count -> 1.
ntfs3: sda3: ino=3cda0, Correct links count -> 1.
ntfs3: 11 callbacks suppressed
ntfs3: sda3: ino=41a20, Correct links count -> 1.
ntfs3: sda3: ino=41aa3, Correct links count -> 1.
ntfs3: sda3: ino=4244f, Correct links count -> 1.
ntfs3: sda3: ino=42d51, Correct links count -> 1.
ntfs3: sda3: ino=430cd, Correct links count -> 1.
ntfs3: sda3: ino=1cd70, Correct links count -> 1.
ntfs3: sda3: ino=43d51, Correct links count -> 1.
ntfs3: sda3: ino=47885, Correct links count -> 1.
ntfs3: sda3: ino=4799c, Correct links count -> 1.
ntfs3: sda3: ino=47cab, Correct links count -> 1.
ntfs3: 27 callbacks suppressed
ntfs3: sda3: ino=5c5d6, Correct links count -> 1.
ntfs3: sda3: ino=1cd9, Correct links count -> 1.
ntfs3: sda3: ino=23aa, Correct links count -> 1.
ntfs3: sda3: ino=79af8, Correct links count -> 1.
ntfs3: sda3: ino=2ccf, Correct links count -> 1.
ntfs3: sda3: ino=2d95, Correct links count -> 1.
ntfs3: sda3: ino=3074, Correct links count -> 1.
ntfs3: sda3: ino=79f1c, Correct links count -> 1.
ntfs3: sda3: ino=7b5d7, Correct links count -> 1.
ntfs3: sda3: ino=3ace, Correct links count -> 1.
ntfs3: 45 callbacks suppressed
ntfs3: sda3: ino=bd0c, Correct links count -> 1.
ntfs3: sda3: ino=be76, Correct links count -> 1.
ntfs3: sda3: ino=be88, Correct links count -> 1.
ntfs3: sda3: ino=bf0d, Correct links count -> 1.
ntfs3: sda3: ino=b429f, Correct links count -> 1.
ntfs3: sda3: ino=bf1b, Correct links count -> 1.
ntfs3: sda3: ino=c12c, Correct links count -> 1.
ntfs3: sda3: ino=c4484, Correct links count -> 1.
ntfs3: sda3: ino=c287, Correct links count -> 1.
ntfs3: sda3: ino=c5518, Correct links count -> 1.
ntfs3: sda3: ino=c3b0, Correct links count -> 1.
ntfs3: sda3: ino=c6ff2, Correct links count -> 1.
ntfs3: sda3: ino=d3a8, Correct links count -> 1.
ntfs3: sda3: ino=d465, Correct links count -> 1.
ntfs3: sda3: ino=e459, Correct links count -> 1.
ntfs3: sda3: ino=d19e5, Correct links count -> 1.
ntfs3: sda3: ino=e470, Correct links count -> 1.
ntfs3: sda3: ino=d8783, Correct links count -> 1.
ntfs3: sda3: ino=e530, Correct links count -> 1.
ntfs3: 5 callbacks suppressed
ntfs3: sda3: ino=ef1b, Correct links count -> 1.
ntfs3: sda3: ino=dba4e, Correct links count -> 1.
ntfs3: sda3: ino=efe6, Correct links count -> 1.
ntfs3: sda3: ino=f004, Correct links count -> 1.
ntfs3: sda3: ino=f34d, Correct links count -> 1.
ntfs3: sda3: ino=dc377, Correct links count -> 1.
ntfs3: sda3: ino=f41c, Correct links count -> 1.
ntfs3: sda3: ino=f57e, Correct links count -> 1.
ntfs3: sda3: ino=f6dd, Correct links count -> 1.
ntfs3: sda3: ino=f6e8, Correct links count -> 1.
ntfs3: 57 callbacks suppressed
ntfs3: sda3: ino=13434, Correct links count -> 1.
ntfs3: sda3: ino=13454, Correct links count -> 1.
ntfs3: sda3: ino=13481, Correct links count -> 1.
ntfs3: sda3: ino=134d5, Correct links count -> 1.
ntfs3: sda3: ino=13504, Correct links count -> 1.
ntfs3: sda3: ino=137ed, Correct links count -> 1.
ntfs3: sda3: ino=1381f, Correct links count -> 1.
ntfs3: sda3: ino=1389a, Correct links count -> 1.
ntfs3: sda3: ino=13a34, Correct links count -> 1.
ntfs3: sda3: ino=13a94, Correct links count -> 1.
ntfs3: 25 callbacks suppressed
ntfs3: sda3: ino=18dba, Correct links count -> 1.
ntfs3: sda3: ino=1aa4e, Correct links count -> 1.
ntfs3: sda3: ino=1b009, Correct links count -> 1.
ntfs3: sda3: ino=1b42a, Correct links count -> 1.
ntfs3: sda3: ino=1c586, Correct links count -> 1.
ntfs3: sda3: ino=1cb52, Correct links count -> 1.
ntfs3: sda3: ino=1ce76, Correct links count -> 1.
ntfs3: sda3: ino=1d138, Correct links count -> 1.
ntfs3: sda3: ino=1d209, Correct links count -> 1.
ntfs3: sda3: ino=1d55a, Correct links count -> 1.
ntfs3: 22 callbacks suppressed
ntfs3: sda3: ino=23031, Correct links count -> 1.
ntfs3: sda3: ino=23035, Correct links count -> 1.
ntfs3: sda3: ino=230a3, Correct links count -> 1.
ntfs3: sda3: ino=23390, Correct links count -> 1.
ntfs3: sda3: ino=23603, Correct links count -> 1.
ntfs3: sda3: ino=23682, Correct links count -> 1.
ntfs3: sda3: ino=23744, Correct links count -> 1.
ntfs3: sda3: ino=23933, Correct links count -> 1.
ntfs3: sda3: ino=2409a, Correct links count -> 1.
ntfs3: sda3: ino=24480, Correct links count -> 1.
ntfs3: 41 callbacks suppressed
ntfs3: sda3: ino=30f45, Correct links count -> 1.
ntfs3: sda3: ino=3112e, Correct links count -> 1.
ntfs3: sda3: ino=311da, Correct links count -> 1.
ntfs3: sda3: ino=3122e, Correct links count -> 1.
ntfs3: sda3: ino=3122f, Correct links count -> 1.
ntfs3: sda3: ino=31230, Correct links count -> 1.
ntfs3: sda3: ino=3137b, Correct links count -> 1.
ntfs3: sda3: ino=31474, Correct links count -> 1.
ntfs3: sda3: ino=3260a, Correct links count -> 1.
ntfs3: sda3: ino=34c54, Correct links count -> 1.
ntfs3: 30 callbacks suppressed
ntfs3: sda3: ino=379fe, Correct links count -> 1.
ntfs3: sda3: ino=37ce2, Correct links count -> 1.
ntfs3: sda3: ino=37d02, Correct links count -> 1.
ntfs3: sda3: ino=37d56, Correct links count -> 1.
ntfs3: sda3: ino=37d6c, Correct links count -> 1.
ntfs3: sda3: ino=37d6d, Correct links count -> 1.
ntfs3: sda3: ino=37d6e, Correct links count -> 1.
ntfs3: sda3: ino=37e12, Correct links count -> 1.
ntfs3: sda3: ino=37e15, Correct links count -> 1.
ntfs3: sda3: ino=37e96, Correct links count -> 1.
ntfs3: 45 callbacks suppressed
ntfs3: sda3: ino=47da5, Correct links count -> 1.
ntfs3: sda3: ino=47dab, Correct links count -> 1.
ntfs3: sda3: ino=48f67, Correct links count -> 1.
ntfs3: sda3: ino=4976f, Correct links count -> 1.
ntfs3: sda3: ino=4a21d, Correct links count -> 1.
ntfs3: sda3: ino=4a21e, Correct links count -> 1.
ntfs3: sda3: ino=4e3f4, Correct links count -> 1.
ntfs3: sda3: ino=51f4c, Correct links count -> 1.
ntfs3: sda3: ino=5200d, Correct links count -> 1.
ntfs3: sda3: ino=525b5, Correct links count -> 1.
ntfs3: 29 callbacks suppressed
ntfs3: sda3: ino=ef256, Correct links count -> 1.
ntfs3: sda3: ino=ef257, Correct links count -> 1.
ntfs3: sda3: ino=ef258, Correct links count -> 1.
ntfs3: sda3: ino=ef259, Correct links count -> 1.
ntfs3: sda3: ino=ef25a, Correct links count -> 1.
ntfs3: sda3: ino=ef25b, Correct links count -> 1.
ntfs3: sda3: ino=ef25c, Correct links count -> 1.
ntfs3: sda3: ino=ef25f, Correct links count -> 1.
ntfs3: sda3: ino=ef260, Correct links count -> 1.
ntfs3: sda3: ino=ef261, Correct links count -> 1.
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712523614.539:163): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=22706 comm="cupsd" capability=12 capname="net_admin"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
rtw_8821ce 0000:02:00.0: timed out to flush queue 2
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 000000006cd818ba Integer 0000000000000002
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 000000006f99ec4e Integer 0000000000000001
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 000000001d8fbd17 Integer 0000000000000000
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 4.729 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.342 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 4.123 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.319 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
ACPI: EC: event unblocked
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
i2c_hid_acpi i2c-ELAN072B:00: i2c_hid_get_input: incomplete report (14/65280)
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
r8169 0000:01:00.0 eno1: Link is Down
Bluetooth: MGMT ver 1.22
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 2.966 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.679 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
r8169 0000:01:00.0 eno1: Link is Down
Bluetooth: MGMT ver 1.22
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
perf: interrupt took too long (7766 > 7762), lowering kernel.perf_event_max_sample_rate to 25750
ntfs3: 26 callbacks suppressed
ntfs3: sda3: ino=efee, Correct links count -> 1.
ntfs3: sda3: ino=f2b1, Correct links count -> 1.
ntfs3: sda3: ino=f369, Correct links count -> 1.
ntfs3: sda3: ino=f56a, Correct links count -> 1.
ntfs3: sda3: ino=f57d, Correct links count -> 1.
ntfs3: sda3: ino=f638, Correct links count -> 1.
ntfs3: sda3: ino=f668, Correct links count -> 1.
ntfs3: sda3: ino=f7c7, Correct links count -> 1.
ntfs3: sda3: ino=f9a9, Correct links count -> 1.
ntfs3: sda3: ino=1052d, Correct links count -> 1.
ntfs3: 39 callbacks suppressed
ntfs3: sda3: ino=79d1b, Correct links count -> 1.
ntfs3: sda3: ino=4e1b5, Correct links count -> 1.
ntfs3: sda3: ino=4ee3c, Correct links count -> 1.
ntfs3: sda3: ino=4fd25, Correct links count -> 1.
ntfs3: sda3: ino=4fd26, Correct links count -> 1.
ntfs3: sda3: ino=4fd6b, Correct links count -> 1.
ntfs3: sda3: ino=36a0d, Correct links count -> 1.
ntfs3: sda3: ino=4fdc5, Correct links count -> 1.
ntfs3: sda3: ino=376d3, Correct links count -> 1.
ntfs3: sda3: ino=4936e, Correct links count -> 1.
ntfs3: sda3: ino=4f7b8, Correct links count -> 1.
ntfs3: sda3: ino=3f308, Correct links count -> 1.
ntfs3: sda3: ino=4f550, Correct links count -> 1.
ntfs3: sda3: ino=4e1b6, Correct links count -> 1.
ntfs3: sda3: ino=57d40, Correct links count -> 1.
ntfs3: sda3: ino=4e1c3, Correct links count -> 1.
ntfs3: 32 callbacks suppressed
ntfs3: sda3: ino=3ca77, Correct links count -> 1.
ntfs3: sda3: ino=3d94f, Correct links count -> 1.
ntfs3: sda3: ino=47eeb, Correct links count -> 1.
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712576397.237:164): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=31106 comm="snap-confine" capability=12 capname="net_admin"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
------------[ cut here ]------------
firmware failed to ack driver for leaving Deep Power mode
Modules linked in: ntfs3 ccm rfcomm snd_seq_dummy snd_hrtimer cmac algif_hash algif_skcipher af_alg bnep amdgpu binfmt_misc nls_iso8859_1 snd_sof_amd_acp63 intel_rapl_msr intel_rapl_common snd_sof_amd_vangogh snd_sof_amd_rembrandt snd_sof_amd_renoir snd_sof_amd_acp uvcvideo snd_sof_pci edac_mce_amd snd_sof_xtensa_dsp snd_sof kvm_amd videobuf2_vmalloc snd_sof_utils rtw88_8821ce kvm snd_hda_codec_realtek snd_soc_core rtw88_8821c snd_hda_codec_generic snd_hda_codec_hdmi uvc snd_hda_intel rtw88_pci videobuf2_memops irqbypass rtw88_core snd_compress videobuf2_v4l2 ac97_bus snd_pcm_dmaengine snd_intel_dspcfg snd_intel_sdw_acpi videodev snd_pci_ps amdxcp snd_hda_codec drm_exec snd_rpl_pci_acp6x crct10dif_pclmul gpu_sched videobuf2_common mac80211 btusb snd_hda_core polyval_clmulni drm_buddy snd_acp_pci snd_hwdep mc snd_acp_legacy_common drm_suballoc_helper drm_ttm_helper btrtl polyval_generic snd_seq_midi ghash_clmulni_intel snd_seq_midi_event snd_pci_acp6x ttm btintel snd_pcm btbcm drm_display_helper
sha256_ssse3 snd_rawmidi btmtk cec bluetooth snd_seq sha1_ssse3 snd_pci_acp5x aesni_intel rc_core snd_seq_device cfg80211 drm_kms_helper snd_timer hp_wmi crypto_simd snd_rn_pci_acp3x cryptd i2c_algo_bit ecdh_generic rapl snd ecc snd_acp_config libarc4 ccp platform_profile snd_soc_acpi soundcore snd_pci_acp3x k10temp wmi_bmof sparse_keymap joydev input_leds serio_raw mac_hid hid_multitouch i2c_piix4 acpi_tad wireless_hotkey msr parport_pc ppdev lp efi_pstore parport dmi_sysfs ip_tables x_tables autofs4 uas usb_storage hid_generic i2c_hid_acpi i2c_hid hid drm r8169 ahci crc32_pclmul libahci xhci_pci video realtek xhci_pci_renesas wmi
CPU: 1 PID: 32114 Comm: kworker/u33:1 Not tainted 6.8.0 #1
Hardware name: HP HP 255 G8 Notebook PC/87D2, BIOS F.26 10/20/2021
Workqueue: rtw_tx_wq rtw_tx_work [rtw88_core]
RIP: 0010:rtw_power_mode_change+0x104/0x150 [rtw88_core]
Code: d2 c4 ee da 44 30 e8 78 d1 45 84 f6 48 c7 c0 6c d0 08 c1 48 c7 c6 75 d0 08 c1 48 c7 c7 48 b1 08 c1 48 0f 45 f0 e8 cc 45 c9 d9 0b 48 89 df e8 82 c1 ff ff 5b 41 5c 41 5d 41 5e 5d 31 c0 31 d2
RSP: 0018:ffff9a0e0a4dfd18 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff899e4afe1fc0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9a0e0a4dfd38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 00000000c109d080 R14: 0000000000000000 R15: ffff899e4afe7328
FS: 0000000000000000(0000) GS:ffff89a100680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007527d0c89aa8 CR3: 0000000115f32000 CR4: 00000000003506f0
Call Trace:
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
? report_bug+0x17e/0x1b0
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
rtw_pci_tx_kick_off_queue+0xa1/0xd0 [rtw88_pci]
rtw_pci_tx_kick_off+0x3c/0x60 [rtw88_pci]
__rtw_tx_work+0x21d/0x260 [rtw88_core]
rtw_tx_work+0x15/0x20 [rtw88_core]
process_one_work+0x17e/0x370
worker_thread+0x28a/0x450
? __pfx_worker_thread+0x10/0x10
kthread+0xf2/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
---[ end trace 0000000000000000 ]---
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
------------[ cut here ]------------
firmware failed to ack driver for leaving Deep Power mode
Modules linked in: ntfs3 ccm rfcomm snd_seq_dummy snd_hrtimer cmac algif_hash algif_skcipher af_alg bnep amdgpu binfmt_misc nls_iso8859_1 snd_sof_amd_acp63 intel_rapl_msr intel_rapl_common snd_sof_amd_vangogh snd_sof_amd_rembrandt snd_sof_amd_renoir snd_sof_amd_acp uvcvideo snd_sof_pci edac_mce_amd snd_sof_xtensa_dsp snd_sof kvm_amd videobuf2_vmalloc snd_sof_utils rtw88_8821ce kvm snd_hda_codec_realtek snd_soc_core rtw88_8821c snd_hda_codec_generic snd_hda_codec_hdmi uvc snd_hda_intel rtw88_pci videobuf2_memops irqbypass rtw88_core snd_compress videobuf2_v4l2 ac97_bus snd_pcm_dmaengine snd_intel_dspcfg snd_intel_sdw_acpi videodev snd_pci_ps amdxcp snd_hda_codec drm_exec snd_rpl_pci_acp6x crct10dif_pclmul gpu_sched videobuf2_common mac80211 btusb snd_hda_core polyval_clmulni drm_buddy snd_acp_pci snd_hwdep mc snd_acp_legacy_common drm_suballoc_helper drm_ttm_helper btrtl polyval_generic snd_seq_midi ghash_clmulni_intel snd_seq_midi_event snd_pci_acp6x ttm btintel snd_pcm btbcm drm_display_helper
sha256_ssse3 snd_rawmidi btmtk cec bluetooth snd_seq sha1_ssse3 snd_pci_acp5x aesni_intel rc_core snd_seq_device cfg80211 drm_kms_helper snd_timer hp_wmi crypto_simd snd_rn_pci_acp3x cryptd i2c_algo_bit ecdh_generic rapl snd ecc snd_acp_config libarc4 ccp platform_profile snd_soc_acpi soundcore snd_pci_acp3x k10temp wmi_bmof sparse_keymap joydev input_leds serio_raw mac_hid hid_multitouch i2c_piix4 acpi_tad wireless_hotkey msr parport_pc ppdev lp efi_pstore parport dmi_sysfs ip_tables x_tables autofs4 uas usb_storage hid_generic i2c_hid_acpi i2c_hid hid drm r8169 ahci crc32_pclmul libahci xhci_pci video realtek xhci_pci_renesas wmi
CPU: 0 PID: 33008 Comm: kworker/u33:1 Tainted: G W 6.8.0 #1
Hardware name: HP HP 255 G8 Notebook PC/87D2, BIOS F.26 10/20/2021
Workqueue: rtw_tx_wq rtw_tx_work [rtw88_core]
RIP: 0010:rtw_power_mode_change+0x104/0x150 [rtw88_core]
Code: d2 c4 ee da 44 30 e8 78 d1 45 84 f6 48 c7 c0 6c d0 08 c1 48 c7 c6 75 d0 08 c1 48 c7 c7 48 b1 08 c1 48 0f 45 f0 e8 cc 45 c9 d9 0b 48 89 df e8 82 c1 ff ff 5b 41 5c 41 5d 41 5e 5d 31 c0 31 d2
RSP: 0018:ffff9a0e09d3bd18 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff899e4afe1fc0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9a0e09d3bd38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 00000000c109d080 R14: 0000000000000000 R15: ffff899e4afe7328
FS: 0000000000000000(0000) GS:ffff89a100600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000391f00347000 CR3: 000000013260c000 CR4: 00000000003506f0
Call Trace:
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
? report_bug+0x17e/0x1b0
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
? rtw_power_mode_change+0x104/0x150 [rtw88_core]
rtw_pci_tx_kick_off_queue+0xa1/0xd0 [rtw88_pci]
rtw_pci_tx_kick_off+0x3c/0x60 [rtw88_pci]
__rtw_tx_work+0x21d/0x260 [rtw88_core]
rtw_tx_work+0x15/0x20 [rtw88_core]
process_one_work+0x17e/0x370
worker_thread+0x28a/0x450
? __pfx_worker_thread+0x10/0x10
kthread+0xf2/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
---[ end trace 0000000000000000 ]---
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
loop1: detected capacity change from 0 to 952
audit: type=1400 audit(1712596484.138:165): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=34174 comm="apparmor_parser"
audit: type=1400 audit(1712596484.138:166): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/21184/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=34174 comm="apparmor_parser"
audit: type=1400 audit(1712596485.094:167): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snapd-desktop-integration" pid=34176 comm="apparmor_parser"
audit: type=1400 audit(1712596485.258:168): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snapd-desktop-integration.hook.configure" pid=34177 comm="apparmor_parser"
audit: type=1400 audit(1712596485.486:169): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snapd-desktop-integration.snapd-desktop-integration" pid=34178 comm="apparmor_parser"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
audit: type=1400 audit(1712610010.242:170): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=37001 comm="cupsd" capability=12 capname="net_admin"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712612274.423:171): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=37190 comm="snap-confine" capability=12 capname="net_admin"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ntfs3: sda3: ino=16030, Correct links count -> 1.
ntfs3: sda3: ino=16788, Correct links count -> 1.
ntfs3: sda3: ino=167ed, Correct links count -> 1.
ntfs3: sda3: ino=170be, Correct links count -> 1.
ntfs3: sda3: ino=172b1, Correct links count -> 1.
ntfs3: sda3: ino=1761f, Correct links count -> 1.
ntfs3: sda3: ino=17aa6, Correct links count -> 1.
ntfs3: sda3: ino=17af4, Correct links count -> 1.
ntfs3: sda3: ino=18241, Correct links count -> 1.
ntfs3: sda3: ino=188d1, Correct links count -> 1.
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
rtw_8821ce 0000:02:00.0: failed to get tx report from firmware
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=2)
wlo1: associated
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 00000000014b659c Integer 0000000000000002
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 00000000b535cd33 Integer 0000000000000001
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20230628/psargs-330)
Initialized Local Variables for Method [APCL]:
Local0: 00000000282c0e41 Integer 0000000000000000
No Arguments are initialized for method [APCL]
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
Filesystems sync: 5.795 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.468 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
ACPI: EC: event unblocked
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 3/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=15)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=39)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: deauthenticating from 64:d8:14:cd:49:65 by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=17)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: deauthenticating from 64:d8:14:cd:49:6a by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=41)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=21)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 0c:d9:96:ed:10:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 1/3)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 2/3)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 3/3)
wlo1: authentication with 0c:d9:96:ed:10:1a timed out
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=52)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
ntfs3: 13 callbacks suppressed
ntfs3: sda3: ino=1d34c, Correct links count -> 1.
ntfs3: sda3: ino=1d595, Correct links count -> 1.
ntfs3: sda3: ino=1dfb9, Correct links count -> 1.
ntfs3: sda3: ino=1e048, Correct links count -> 1.
ntfs3: sda3: ino=1e0c2, Correct links count -> 1.
ntfs3: sda3: ino=1eac4, Correct links count -> 1.
ntfs3: sda3: ino=1ec3e, Correct links count -> 1.
ntfs3: sda3: ino=1fa46, Correct links count -> 1.
ntfs3: sda3: ino=1fa78, Correct links count -> 1.
ntfs3: sda3: ino=1fb87, Correct links count -> 1.
ntfs3: sda3: ino=20e59, Correct links count -> 1.
ntfs3: sda3: ino=22d1a, Correct links count -> 1.
ntfs3: sda3: ino=22de4, Correct links count -> 1.
ntfs3: sda3: ino=22fc8, Correct links count -> 1.
wlo1: deauthenticating from 64:d8:14:cd:49:65 by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=35)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
traps: WatchDogQueue[44406] trap int3 ip:772e4c2a7867 sp:772dbb3ff6b0 error:0 in libglib-2.0.so.0.7800.0[772e4c264000+9a000]
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: disconnect from AP 64:d8:14:cd:49:6a for new auth to 64:d8:14:cd:49:65
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=52)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 2/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 3/3)
wlo1: association with 64:d8:14:cd:49:6a timed out
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=56)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 0c:d9:96:ed:14:0a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 0c:d9:96:ed:14:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:14:0a (try 1/3)
wlo1: send auth to 0c:d9:96:ed:14:0a (try 2/3)
wlo1: authenticated
wlo1: associate with 0c:d9:96:ed:14:0a (try 1/3)
wlo1: associate with 0c:d9:96:ed:14:0a (try 2/3)
wlo1: associate with 0c:d9:96:ed:14:0a (try 3/3)
wlo1: RX ReassocResp from 0c:d9:96:ed:14:0a (capab=0x1421 status=0 aid=13)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 0c:d9:96:ed:14:0a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=55)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=50)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=63)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=58)
wlo1: associated
wlo1: deauthenticated from 64:d8:14:cd:49:6a (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 2/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=58)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:65 timed out
wlo1: authenticate with 0c:d9:96:ed:14:05 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:14:05 (try 1/3)
wlo1: send auth to 0c:d9:96:ed:14:05 (try 2/3)
wlo1: send auth to 0c:d9:96:ed:14:05 (try 3/3)
wlo1: authentication with 0c:d9:96:ed:14:05 timed out
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=58)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 2/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 3/3)
wlo1: association with 64:d8:14:cd:49:6a timed out
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=58)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=6)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=69)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=8)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=73)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=10)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=80)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=13)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: associate with 64:d8:14:cd:49:6a (try 2/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=86)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=17)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=86)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=21)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX ReassocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=96)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:6a
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=29)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 64:d8:14:cd:49:6a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:6a timed out
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: suspend entry (deep)
Filesystems sync: 0.367 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.003 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
ACPI: EC: event unblocked
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with 0c:d9:96:ed:10:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 1/3)
wlo1: authenticated
wlo1: associate with 0c:d9:96:ed:10:1a (try 1/3)
wlo1: RX AssocResp from 0c:d9:96:ed:10:1a (capab=0x1421 status=0 aid=54)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 0c:d9:96:ed:10:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: authenticated
wlo1: associate with 64:d8:14:cd:49:6a (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:6a (capab=0x1421 status=0 aid=115)
wlo1: associated
wlo1: deauthenticated from 64:d8:14:cd:49:6a (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:6a timed out
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 64:d8:14:cd:49:65 (try 1/3)
wlo1: RX AssocResp from 64:d8:14:cd:49:65 (capab=0x1101 status=0 aid=55)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 64:d8:14:cd:49:65
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: disconnect from AP 64:d8:14:cd:49:65 for new auth to 0c:d9:96:ed:10:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with 0c:d9:96:ed:10:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 1/3)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 2/3)
wlo1: authenticated
wlo1: associate with 0c:d9:96:ed:10:1a (try 1/3)
wlo1: RX ReassocResp from 0c:d9:96:ed:10:1a (capab=0x1421 status=0 aid=53)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 0c:d9:96:ed:10:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:65 timed out
ntfs3: 36 callbacks suppressed
ntfs3: sda3: ino=3b83b, Correct links count -> 1.
ntfs3: sda3: ino=3d4ff, Correct links count -> 1.
ntfs3: sda3: ino=3d523, Correct links count -> 1.
ntfs3: sda3: ino=3d715, Correct links count -> 1.
ntfs3: sda3: ino=3e6fe, Correct links count -> 1.
ntfs3: sda3: ino=3ee2d, Correct links count -> 1.
ntfs3: sda3: ino=3eea3, Correct links count -> 1.
ntfs3: sda3: ino=40a13, Correct links count -> 1.
ntfs3: sda3: ino=40e38, Correct links count -> 1.
ntfs3: sda3: ino=413ed, Correct links count -> 1.
wlo1: authenticate with 0c:d9:96:ed:10:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with 0c:d9:96:ed:10:15 (try 1/3)
wlo1: associate with 0c:d9:96:ed:10:15 (try 2/3)
wlo1: RX AssocResp from 0c:d9:96:ed:10:15 (capab=0x1101 status=0 aid=21)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 0c:d9:96:ed:10:15
wlo1: authenticate with 0c:d9:96:ed:10:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 1/3)
wlo1: authenticated
wlo1: associate with 0c:d9:96:ed:10:1a (try 1/3)
wlo1: RX AssocResp from 0c:d9:96:ed:10:1a (capab=0x1421 status=0 aid=56)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by 0c:d9:96:ed:10:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 2
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with 64:d8:14:cd:49:6a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:6a (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:6a (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:6a timed out
wlo1: authenticate with 64:d8:14:cd:49:65 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 64:d8:14:cd:49:65 (try 1/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 2/3)
wlo1: send auth to 64:d8:14:cd:49:65 (try 3/3)
wlo1: authentication with 64:d8:14:cd:49:65 timed out
wlo1: authenticate with 0c:d9:96:ed:10:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 1/3)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 2/3)
wlo1: send auth to 0c:d9:96:ed:10:1a (try 3/3)
wlo1: authentication with 0c:d9:96:ed:10:1a timed out
ntfs3: 43 callbacks suppressed
ntfs3: sda3: ino=10715, Correct links count -> 1.
ntfs3: sda3: ino=2a612, Correct links count -> 1.
ntfs3: sda3: ino=1d098, Correct links count -> 1.
ntfs3: sda3: ino=283c3, Correct links count -> 1.
ntfs3: sda3: ino=e49f, Correct links count -> 1.
ntfs3: sda3: ino=21cf0, Correct links count -> 1.
ntfs3: sda3: ino=21d32, Correct links count -> 1.
ntfs3: sda3: ino=23df2, Correct links count -> 1.
ntfs3: sda3: ino=27204, Correct links count -> 1.
ntfs3: sda3: ino=1b4d, Correct links count -> 1.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with 92:1e:9c:d5:88:61 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to 92:1e:9c:d5:88:61 (try 1/3)
wlo1: authenticated
wlo1: associate with 92:1e:9c:d5:88:61 (try 1/3)
wlo1: RX AssocResp from 92:1e:9c:d5:88:61 (capab=0x411 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by 92:1e:9c:d5:88:61
wlo1: deauthenticating from 92:1e:9c:d5:88:61 by local choice (Reason: 3=DEAUTH_LEAVING)
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: suspend entry (deep)
Filesystems sync: 0.182 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.005 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eno1: Link is Down
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=85)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=5)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=87)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: deauthenticating from dc:a5:f4:1b:2b:1a by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=87)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=7)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=82)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=10)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=85)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
ntfs3: 22 callbacks suppressed
ntfs3: sda3: ino=17ddc, Correct links count -> 1.
ntfs3: sda3: ino=36cf1, Correct links count -> 1.
ntfs3: sda3: ino=4254f, Correct links count -> 1.
ntfs3: sda3: ino=426d0, Correct links count -> 1.
ntfs3: sda3: ino=182dc, Correct links count -> 1.
ntfs3: sda3: ino=1d18b, Correct links count -> 1.
ntfs3: sda3: ino=3635b, Correct links count -> 1.
ntfs3: sda3: ino=41c2b, Correct links count -> 1.
ntfs3: sda3: ino=17d2e, Correct links count -> 1.
ntfs3: sda3: ino=330f0, Correct links count -> 1.
ntfs3: 20 callbacks suppressed
ntfs3: sda3: ino=12e61f, Correct links count -> 1.
ntfs3: sda3: ino=12e8cd, Correct links count -> 1.
ntfs3: sda3: ino=12e673, Correct links count -> 1.
ntfs3: sda3: ino=11948, Correct links count -> 1.
ntfs3: sda3: ino=12e7c4, Correct links count -> 1.
ntfs3: sda3: ino=9d0c0, Correct links count -> 1.
ntfs3: sda3: ino=b7d2, Correct links count -> 1.
ntfs3: sda3: ino=118ae, Correct links count -> 1.
ntfs3: sda3: ino=fd29, Correct links count -> 1.
ntfs3: sda3: ino=79116, Correct links count -> 1.
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=3)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=94)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=90)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=92)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=24)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=94)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=95)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 3/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=30)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=95)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=28)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=100)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=30)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=105)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=113)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=36)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=114)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=37)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=114)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=40)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=3)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=123)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=123)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=43)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=128)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=46)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=132)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=49)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=131)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=48)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=131)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=50)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=127)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=4)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=127)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=127)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=127)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=49)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=131)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=50)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:15
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 3/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=127)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=131)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=53)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=131)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=132)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=53)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: disconnect from AP dc:a5:f4:1a:a2:0a for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=134)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=126)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1a:a2:0a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1a:a2:0a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1a:a2:0a (capab=0x1421 status=0 aid=55)
wlo1: associated
wlo1: Limiting TX power to 11 dBm as advertised by dc:a5:f4:1a:a2:0a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=128)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 3/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=133)
wlo1: associated
wlo1: deauthenticated from dc:a5:f4:1b:2b:1a (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=133)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=6)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=137)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=9)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 3/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=139)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=144)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=1)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=143)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=2)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=146)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=5)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=136)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=6)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: RX ReassocResp from dc:a5:f4:1b:2b:1a (capab=0x1421 status=0 aid=138)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:1a
wlo1: authenticate with dc:a5:f4:1b:2b:15 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:2b:15 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:2b:15 (capab=0x1101 status=0 aid=6)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:2b:15
wlo1: disconnect from AP dc:a5:f4:1b:2b:15 for new auth to dc:a5:f4:1b:2b:1a
wlo1: 80 MHz not supported, disabling VHT
wlo1: authenticate with dc:a5:f4:1b:2b:1a (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: authenticated
wlo1: associate with dc:a5:f4:1b:2b:1a (try 1/3)
wlo1: associate with dc:a5:f4:1b:2b:1a (try 2/3)
wlo1: associate with dc:a5:f4:1b:2b:1a (try 3/3)
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
wlo1: association with dc:a5:f4:1b:2b:1a timed out
PM: suspend entry (deep)
Filesystems sync: 0.266 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.005 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
ACPI: EC: event unblocked
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
PM: suspend exit
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with dc:a5:f4:1b:19:e5 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to dc:a5:f4:1b:19:e5 (try 1/3)
wlo1: authenticated
wlo1: VHT capa missing/short, disabling VHT/HE/EHT
wlo1: associate with dc:a5:f4:1b:19:e5 (try 1/3)
wlo1: RX AssocResp from dc:a5:f4:1b:19:e5 (capab=0x1101 status=0 aid=3)
wlo1: associated
wlo1: Limiting TX power to 17 dBm as advertised by dc:a5:f4:1b:19:e5
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
wlo1: deauthenticating from dc:a5:f4:1b:19:e5 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.215 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.005 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.218 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.005 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
AMD-Vi: Virtual APIC enabled
AMD-Vi: Virtual APIC enabled
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
[drm] PSP is resuming...
i2c_hid_acpi i2c-ELAN072B:00: i2c_hid_get_input: incomplete report (14/65280)
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu: restore the fine grain parameters
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/100
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
usb 1-6.1: reset high-speed USB device number 4 using xhci_hcd
usb 1-6.3: reset full-speed USB device number 5 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
r8169 0000:01:00.0 eno1: Link is Down
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush pci tx ring[1]
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush pci tx ring[1]
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush pci tx ring[1]
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=5)
wlo1: associated
wlo1: deauthenticating from fa:f0:82:62:34:70 by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
audit: type=1400 audit(1712694463.745:172): apparmor="DENIED" operation="open" class="file" profile="snap.firefox.firefox" name="/etc/fstab" pid=53697 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1712694795.156:173): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name=2F686F6D652F7A77656C616B68652FD097D0B0D0B3D180D183D0B7D0BAD0B82F706F7765722E6B6F pid=57408 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712694795.156:174): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name=2F686F6D652F7A77656C616B68652FD097D0B0D0B3D180D183D0B7D0BAD0B82F4D616B6566696C6520283129 pid=57408 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712696407.472:175): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=60225 comm="cupsd" capability=12 capname="net_admin"
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
audit: type=1400 audit(1712699780.938:176): apparmor="DENIED" operation="open" class="file" profile="snap.firefox.firefox" name="/etc/fstab" pid=53697 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
ntfs3: 46 callbacks suppressed
ntfs3: sda3: ino=e2f65, Correct links count -> 1.
ntfs3: sda3: ino=2728, Correct links count -> 1.
ntfs3: sda3: ino=fcbc1, Correct links count -> 1.
ntfs3: sda3: ino=fcbcb, Correct links count -> 1.
ntfs3: sda3: ino=4282a, Correct links count -> 1.
ntfs3: sda3: ino=42859, Correct links count -> 1.
ntfs3: sda3: ino=1045, Correct links count -> 1.
ntfs3: sda3: ino=782, Correct links count -> 1.
ntfs3: sda3: ino=1aff, Correct links count -> 1.
ntfs3: sda3: ino=4287e, Correct links count -> 1.
ntfs3: 314 callbacks suppressed
ntfs3: sda3: ino=1550, Correct links count -> 1.
ntfs3: sda3: ino=15b8, Correct links count -> 1.
ntfs3: sda3: ino=167d, Correct links count -> 1.
ntfs3: sda3: ino=1634, Correct links count -> 1.
ntfs3: sda3: ino=184d, Correct links count -> 1.
ntfs3: sda3: ino=ad6c8, Correct links count -> 1.
ntfs3: sda3: ino=3eef4, Correct links count -> 1.
ntfs3: sda3: ino=404af, Correct links count -> 1.
ntfs3: sda3: ino=404b0, Correct links count -> 1.
ntfs3: sda3: ino=404b1, Correct links count -> 1.
ntfs3: 124 callbacks suppressed
ntfs3: sda3: ino=ad82d, Correct links count -> 1.
ntfs3: sda3: ino=afa1a, Correct links count -> 1.
ntfs3: sda3: ino=af4bb, Correct links count -> 1.
ntfs3: sda3: ino=af823, Correct links count -> 1.
ntfs3: sda3: ino=addd4, Correct links count -> 1.
ntfs3: sda3: ino=adf13, Correct links count -> 1.
ntfs3: sda3: ino=addc4, Correct links count -> 1.
ntfs3: sda3: ino=ad7fa, Correct links count -> 1.
ntfs3: sda3: ino=ad7fb, Correct links count -> 1.
ntfs3: sda3: ino=ad956, Correct links count -> 1.
ntfs3: 224 callbacks suppressed
ntfs3: sda3: ino=945c7, Correct links count -> 1.
ntfs3: sda3: ino=945c8, Correct links count -> 1.
ntfs3: sda3: ino=43cbe, Correct links count -> 1.
ntfs3: sda3: ino=45aa0, Correct links count -> 1.
ntfs3: sda3: ino=45aaf, Correct links count -> 1.
ntfs3: sda3: ino=45b76, Correct links count -> 1.
ntfs3: sda3: ino=45ac5, Correct links count -> 1.
ntfs3: sda3: ino=45ad4, Correct links count -> 1.
ntfs3: sda3: ino=45ad8, Correct links count -> 1.
ntfs3: sda3: ino=45adc, Correct links count -> 1.
ntfs3: 491 callbacks suppressed
ntfs3: sda3: ino=94a2f, Correct links count -> 1.
ntfs3: sda3: ino=94a60, Correct links count -> 1.
ntfs3: sda3: ino=94a85, Correct links count -> 1.
ntfs3: sda3: ino=92c54, Correct links count -> 1.
ntfs3: sda3: ino=94abd, Correct links count -> 1.
ntfs3: sda3: ino=94acf, Correct links count -> 1.
ntfs3: sda3: ino=94adc, Correct links count -> 1.
ntfs3: sda3: ino=94af5, Correct links count -> 1.
ntfs3: sda3: ino=94b12, Correct links count -> 1.
ntfs3: sda3: ino=94b1d, Correct links count -> 1.
ntfs3: 238 callbacks suppressed
ntfs3: sda3: ino=90dd8, Correct links count -> 1.
ntfs3: sda3: ino=90def, Correct links count -> 1.
ntfs3: sda3: ino=90de4, Correct links count -> 1.
ntfs3: sda3: ino=90dfc, Correct links count -> 1.
ntfs3: sda3: ino=90e08, Correct links count -> 1.
ntfs3: sda3: ino=90e14, Correct links count -> 1.
ntfs3: sda3: ino=90e20, Correct links count -> 1.
ntfs3: sda3: ino=90e38, Correct links count -> 1.
ntfs3: sda3: ino=90e29, Correct links count -> 1.
ntfs3: sda3: ino=90e2c, Correct links count -> 1.
ntfs3: 332 callbacks suppressed
ntfs3: sda3: ino=1db23, Correct links count -> 1.
ntfs3: sda3: ino=7473, Correct links count -> 1.
ntfs3: sda3: ino=9803, Correct links count -> 1.
ntfs3: sda3: ino=5826, Correct links count -> 1.
ntfs3: sda3: ino=7475, Correct links count -> 1.
ntfs3: sda3: ino=57df4, Correct links count -> 1.
ntfs3: sda3: ino=596e5, Correct links count -> 1.
ntfs3: sda3: ino=58599, Correct links count -> 1.
ntfs3: sda3: ino=58ba7, Correct links count -> 1.
ntfs3: sda3: ino=596ec, Correct links count -> 1.
ntfs3: 296 callbacks suppressed
ntfs3: sda3: ino=4e72c, Correct links count -> 1.
ntfs3: sda3: ino=59647, Correct links count -> 1.
ntfs3: sda3: ino=5964a, Correct links count -> 1.
ntfs3: sda3: ino=5964e, Correct links count -> 1.
ntfs3: sda3: ino=4f33c, Correct links count -> 1.
ntfs3: sda3: ino=57828, Correct links count -> 1.
ntfs3: sda3: ino=59662, Correct links count -> 1.
ntfs3: sda3: ino=59258, Correct links count -> 1.
ntfs3: sda3: ino=595e9, Correct links count -> 1.
ntfs3: sda3: ino=5925f, Correct links count -> 1.
ntfs3: 339 callbacks suppressed
ntfs3: sda3: ino=4f12f, Correct links count -> 1.
ntfs3: sda3: ino=4f130, Correct links count -> 1.
ntfs3: sda3: ino=1d706, Correct links count -> 1.
ntfs3: sda3: ino=33b1c, Correct links count -> 1.
ntfs3: sda3: ino=4f215, Correct links count -> 1.
ntfs3: sda3: ino=4f216, Correct links count -> 1.
ntfs3: sda3: ino=1f347, Correct links count -> 1.
ntfs3: sda3: ino=36dfe, Correct links count -> 1.
ntfs3: sda3: ino=3d80a, Correct links count -> 1.
ntfs3: sda3: ino=4eda0, Correct links count -> 1.
ntfs3: 150 callbacks suppressed
ntfs3: sda3: ino=df866, Correct links count -> 1.
ntfs3: sda3: ino=fbb19, Correct links count -> 1.
ntfs3: sda3: ino=fbdaf, Correct links count -> 1.
ntfs3: sda3: ino=fbdb7, Correct links count -> 1.
ntfs3: sda3: ino=1a8ad, Correct links count -> 1.
ntfs3: sda3: ino=102b54, Correct links count -> 1.
ntfs3: sda3: ino=fbd90, Correct links count -> 1.
ntfs3: sda3: ino=fbdb9, Correct links count -> 1.
ntfs3: sda3: ino=100ed9, Correct links count -> 1.
ntfs3: sda3: ino=fbea0, Correct links count -> 1.
ntfs3: 725 callbacks suppressed
ntfs3: sda3: ino=598ae, Correct links count -> 1.
ntfs3: sda3: ino=598bb, Correct links count -> 1.
ntfs3: sda3: ino=598bc, Correct links count -> 1.
ntfs3: sda3: ino=598bd, Correct links count -> 1.
ntfs3: sda3: ino=598be, Correct links count -> 1.
ntfs3: sda3: ino=598c0, Correct links count -> 1.
ntfs3: sda3: ino=598c3, Correct links count -> 1.
ntfs3: sda3: ino=598c9, Correct links count -> 1.
ntfs3: sda3: ino=598cd, Correct links count -> 1.
ntfs3: sda3: ino=598ce, Correct links count -> 1.
ntfs3: 889 callbacks suppressed
ntfs3: sda3: ino=43e1c, Correct links count -> 1.
ntfs3: sda3: ino=4d14d, Correct links count -> 1.
ntfs3: sda3: ino=4eb6a, Correct links count -> 1.
ntfs3: sda3: ino=4eb85, Correct links count -> 1.
ntfs3: sda3: ino=4eb86, Correct links count -> 1.
ntfs3: sda3: ino=4eb8d, Correct links count -> 1.
ntfs3: sda3: ino=4ebbd, Correct links count -> 1.
ntfs3: sda3: ino=4ebbe, Correct links count -> 1.
ntfs3: sda3: ino=4ebbf, Correct links count -> 1.
ntfs3: sda3: ino=4ebc5, Correct links count -> 1.
ntfs3: 457 callbacks suppressed
ntfs3: sda3: ino=5981b, Correct links count -> 1.
ntfs3: sda3: ino=596cc, Correct links count -> 1.
ntfs3: sda3: ino=596cd, Correct links count -> 1.
ntfs3: sda3: ino=3523f, Correct links count -> 1.
ntfs3: sda3: ino=1ead0, Correct links count -> 1.
ntfs3: sda3: ino=43e79, Correct links count -> 1.
ntfs3: sda3: ino=43e8e, Correct links count -> 1.
ntfs3: sda3: ino=43e98, Correct links count -> 1.
ntfs3: sda3: ino=43e9d, Correct links count -> 1.
ntfs3: sda3: ino=43ea9, Correct links count -> 1.
ntfs3: 259 callbacks suppressed
ntfs3: sda3: ino=34f2a, Correct links count -> 1.
ntfs3: sda3: ino=36abe, Correct links count -> 1.
ntfs3: sda3: ino=f4ae3, Correct links count -> 1.
ntfs3: sda3: ino=f1cfa, Correct links count -> 1.
ntfs3: sda3: ino=277b1, Correct links count -> 1.
ntfs3: sda3: ino=f5652, Correct links count -> 1.
ntfs3: sda3: ino=f28b2, Correct links count -> 1.
ntfs3: sda3: ino=f28bc, Correct links count -> 1.
ntfs3: sda3: ino=f28c0, Correct links count -> 1.
ntfs3: sda3: ino=367f1, Correct links count -> 1.
ntfs3: 235 callbacks suppressed
ntfs3: sda3: ino=9a6a9, Correct links count -> 1.
ntfs3: sda3: ino=9a6af, Correct links count -> 1.
ntfs3: sda3: ino=9a6b4, Correct links count -> 1.
ntfs3: sda3: ino=9a6b9, Correct links count -> 1.
ntfs3: sda3: ino=9a6bd, Correct links count -> 1.
ntfs3: sda3: ino=9a6ec, Correct links count -> 1.
ntfs3: sda3: ino=9a714, Correct links count -> 1.
ntfs3: sda3: ino=9a739, Correct links count -> 1.
ntfs3: sda3: ino=9a749, Correct links count -> 1.
ntfs3: sda3: ino=9a75b, Correct links count -> 1.
ntfs3: 331 callbacks suppressed
ntfs3: sda3: ino=c14f6, Correct links count -> 1.
ntfs3: sda3: ino=95f77, Correct links count -> 1.
ntfs3: sda3: ino=3b99e, Correct links count -> 1.
ntfs3: sda3: ino=c2066, Correct links count -> 1.
ntfs3: sda3: ino=c2070, Correct links count -> 1.
ntfs3: sda3: ino=c2077, Correct links count -> 1.
ntfs3: sda3: ino=c207a, Correct links count -> 1.
ntfs3: sda3: ino=c207d, Correct links count -> 1.
ntfs3: sda3: ino=c2080, Correct links count -> 1.
ntfs3: sda3: ino=98c00, Correct links count -> 1.
ntfs3: 419 callbacks suppressed
ntfs3: sda3: ino=97947, Correct links count -> 1.
ntfs3: sda3: ino=aa62f, Correct links count -> 1.
ntfs3: sda3: ino=9339c, Correct links count -> 1.
ntfs3: sda3: ino=97c00, Correct links count -> 1.
ntfs3: sda3: ino=c151b, Correct links count -> 1.
ntfs3: sda3: ino=995eb, Correct links count -> 1.
ntfs3: sda3: ino=c1524, Correct links count -> 1.
ntfs3: sda3: ino=c152f, Correct links count -> 1.
ntfs3: sda3: ino=aa4e9, Correct links count -> 1.
ntfs3: sda3: ino=c1542, Correct links count -> 1.
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
perf: interrupt took too long (9710 > 9707), lowering kernel.perf_event_max_sample_rate to 20500
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
rtw_8821ce 0000:02:00.0: timed out to flush queue 1
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
audit: type=1400 audit(1712702050.423:177): apparmor="DENIED" operation="mkdir" class="file" profile="snap.firefox.firefox" name="/run/user/0/" pid=141543 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
audit: type=1400 audit(1712702050.751:178): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=141406 comm="firefox" capability=2 capname="dac_read_search"
audit: type=1400 audit(1712702050.751:179): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=141406 comm="firefox" capability=1 capname="dac_override"
audit: type=1400 audit(1712702088.943:180): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=141690 comm="snap-confine" capability=12 capname="net_admin"
audit: type=1400 audit(1712702089.147:181): apparmor="DENIED" operation="mkdir" class="file" profile="snap.firefox.firefox" name="/run/user/0/" pid=141826 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
audit: type=1400 audit(1712702672.933:182): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/wget-log" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.933:183): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/index.html?banerid=6302000000" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.933:184): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/.wget-hsts" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.933:185): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/sources.list.backup" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:186): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/wget-log" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:187): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/index.html?banerid=6302000000" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:188): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/.wget-hsts" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:189): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/sources.list.backup" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:190): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/amd-uncore.ko" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1712702672.937:191): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/home/zwelakhe/amd-uncore.ko" pid=141032 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
wlo1: authenticate with fa:f0:82:62:34:70 (local address=90:e8:68:1b:34:b1)
wlo1: send auth to fa:f0:82:62:34:70 (try 1/3)
wlo1: authenticated
wlo1: associate with fa:f0:82:62:34:70 (try 1/3)
wlo1: RX AssocResp from fa:f0:82:62:34:70 (capab=0xc31 status=0 aid=3)
wlo1: associated
ACPI Error: No handler for Region [RCM0] (0000000057c0767e) [SystemCMOS] (20230628/evregion-130)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20230628/exfldio-261)
No Local Variables are initialized for Method [ESDT]
No Arguments are initialized for method [ESDT]
ACPI Error: Aborting method \_SB.WMID.ESDT due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q42 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)