dmesg - test1
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 5.10.160-legacy-rk35xx (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Fri Feb 2 07:51:33 UTC 2024
Machine model: Fxblox RK1
efi: UEFI not found.
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
Reserved memory: created CMA memory pool at 0x00000002ff800000, size 8 MiB
OF: reserved mem: initialized node cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000002ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000001ffffffff]
node 0: [mem 0x00000002f0000000-0x00000002ffffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000002ffffffff]
On node 0 totalpages: 2096640
DMA zone: 15352 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 982528 pages, LIFO batch:63
Normal zone: 17408 pages used for memmap
Normal zone: 1114112 pages, LIFO batch:63
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s93480 r8192 d29400 u131072
pcpu-alloc: s93480 r8192 d29400 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 2063880
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
Memory: 8106144K/8386560K available (16896K kernel code, 3648K rwdata, 6540K rodata, 7040K init, 639K bss, 272224K reserved, 8192K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 64734 entries in 253 pages
ftrace: allocated 253 pages with 7 groups
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 480 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
ITS [mem 0xfe640000-0xfe65ffff]
ITS@0x00000000fe640000: allocated 8192 Devices @100200000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100210000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
ITS [mem 0xfe660000-0xfe67ffff]
ITS@0x00000000fe660000: allocated 8192 Devices @100230000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100240000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000100250000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000100260000
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: msi-controller@fe640000 domain created
Platform MSI: msi-controller@fe660000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000100270000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000100280000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
GICv3: CPU3: using allocated LPI pending table @0x0000000100290000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
GICv3: CPU4: using allocated LPI pending table @0x00000001002a0000
CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
GICv3: CPU5: using allocated LPI pending table @0x00000001002b0000
CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
GICv3: CPU6: using allocated LPI pending table @0x00000001002c0000
CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
GICv3: CPU7: using allocated LPI pending table @0x00000001002d0000
CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU features: detected: RCpc load-acquire (LDAPR)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
KASLR disabled due to lack of seed
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters, enabled
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.029:1): state=initialized audit_enabled=0 res=1
Registered FIQ tty driver
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
ramoops: dmesg-0 0x20000@0x0000000000110000
ramoops: console 0x80000@0x0000000000130000
ramoops: pmsg 0x50000@0x00000000001b0000
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0xf0000@0x110000, ecc: 0
rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
rockchip-pinctrl pinctrl: probed pinctrl
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
raid6: neonx8 gen() 5728 MB/s
raid6: neonx8 xor() 4446 MB/s
raid6: neonx4 gen() 5877 MB/s
raid6: neonx4 xor() 4464 MB/s
raid6: neonx2 gen() 5390 MB/s
raid6: neonx2 xor() 4140 MB/s
raid6: neonx1 gen() 4504 MB/s
raid6: neonx1 xor() 3471 MB/s
raid6: int64x8 gen() 1393 MB/s
raid6: int64x8 xor() 914 MB/s
raid6: int64x4 gen() 1718 MB/s
raid6: int64x4 xor() 938 MB/s
raid6: int64x2 gen() 2526 MB/s
raid6: int64x2 xor() 1386 MB/s
raid6: int64x1 gen() 2101 MB/s
raid6: int64x1 xor() 1025 MB/s
raid6: using algorithm neonx4 gen() 5877 MB/s
raid6: .... xor() 4464 MB/s, rmw enabled
raid6: using neon recovery algorithm
fiq_debugger fiq_debugger.0: IRQ fiq not found
fiq_debugger fiq_debugger.0: IRQ wakeup not found
fiq_debugger_probe: could not install nmi irq handler
printk: console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0
vcc12v_dcin: 12000 mV, enabled
reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
vcc5v0_sys: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.2: -ENOENT
vcc5v0_sys: 5000 mV, enabled
reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
wifi_disable: no parameters, enabled
reg-fixed-voltage wifi-diable-gpio-regulator: wifi_disable supplying 0uV
bt_wake: no parameters, enabled
reg-fixed-voltage bt-wake-gpio-regulator: bt_wake supplying 0uV
reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
vcc_1v1_nldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.5: -ENOENT
vcc_1v1_nldo_s3: 1100 mV, enabled
reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
reg-fixed-voltage vcc5v0-host-regulator: Looking up vin-supply from device tree
vcc5v0_host: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.6: -ENOENT
vcc5v0_host: 5000 mV, enabled
reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 5000000uV
reg-fixed-voltage vcc3v3-pcie2x1l0: Looking up vin-supply from device tree
vcc3v3_pcie2x1l0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.7: -ENOENT
vcc3v3_pcie2x1l0: 3300 mV, enabled
reg-fixed-voltage vcc3v3-pcie2x1l0: vcc3v3_pcie2x1l0 supplying 3300000uV
reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
vcc3v3_pcie30: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.8: -ENOENT
vcc3v3_pcie30: 3300 mV, enabled
reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
vbus5v0_typec: 5000 mV, disabled
reg-fixed-voltage vbus5v0-typec: Looking up vin-supply from device tree
vbus5v0_typec: supplied by vcc5v0_sys
reg-fixed-voltage vbus5v0-typec: vbus5v0_typec supplying 5000000uV
vbus5v0_typec1: 5000 mV, disabled
reg-fixed-voltage vbus5v0-typec1: Looking up vin-supply from device tree
vbus5v0_typec1: supplied by vcc5v0_sys
reg-fixed-voltage vbus5v0-typec1: vbus5v0_typec1 supplying 5000000uV
iommu: Default domain type: Translated
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
rockchip-cpuinfo cpuinfo: SoC : 35880000
rockchip-cpuinfo cpuinfo: Serial : b1af07866e6ef851
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 6, 393216 bytes, linear)
UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8956K
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
ntfs: driver 2.1.32 [Flags: R/W].
NET: Registered protocol family 38
xor: measuring software checksum speed
8regs : 6562 MB/sec
32regs : 8722 MB/sec
arm64_neon : 10669 MB/sec
xor: using function: arm64_neon (10669 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply property in node /syscon@fd5d8000/usb2-phy@8000/host-port failed
phy phy-fd5dc000.syscon:usb2-phy@c000.2: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fd5dc000.syscon:usb2-phy@c000.2: -ENOENT
phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up phy-supply from device tree
phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up phy-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply from device tree
phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
phy phy-fee00000.phy.4: Looking up phy-supply from device tree
phy phy-fee00000.phy.4: Looking up phy-supply property in node /phy@fee00000 failed
phy phy-fee20000.phy.5: Looking up phy-supply from device tree
phy phy-fee20000.phy.5: Looking up phy-supply property in node /phy@fee20000 failed
phy phy-fee10000.phy.6: Looking up phy-supply from device tree
phy phy-fee10000.phy.6: Looking up phy-supply property in node /phy@fee10000 failed
phy phy-feda0000.phy.7: Looking up phy-supply from device tree
phy phy-feda0000.phy.7: Looking up phy-supply property in node /phy@feda0000 failed
phy phy-fedb0000.phy.8: Looking up phy-supply from device tree
phy phy-fedb0000.phy.8: Looking up phy-supply property in node /phy@fedb0000 failed
phy phy-fed60000.phy.9: Looking up phy-supply from device tree
phy phy-fed60000.phy.9: Looking up phy-supply property in node /phy@fed60000 failed
phy phy-fee80000.phy.10: Looking up phy-supply from device tree
phy phy-fee80000.phy.10: Looking up phy-supply property in node /phy@fee80000 failed
phy phy-fed80000.phy.11: Looking up phy-supply from device tree
phy phy-fed80000.phy.11: Looking up phy-supply property in node /phy@fed80000/dp-port failed
phy phy-fed80000.phy.12: Looking up phy-supply from device tree
phy phy-fed80000.phy.12: Looking up phy-supply property in node /phy@fed80000/u3-port failed
phy phy-fed90000.phy.13: Looking up phy-supply from device tree
phy phy-fed90000.phy.13: Looking up phy-supply property in node /phy@fed90000/dp-port failed
phy phy-fed90000.phy.14: Looking up phy-supply from device tree
phy phy-fed90000.phy.14: Looking up phy-supply property in node /phy@fed90000/u3-port failed
rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe150000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe150000 failed
rk-pcie fe150000.pcie: no vpcie3v3 regulator found
rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
iep: Module initialized.
mpp_service mpp-srv: f421f8a9774d author: Yandong Lin 2023-09-21 video: rockchip: mpp: rkvenc2: fix slice mode poll failed
mpp_service mpp-srv: probe start
rk-pcie fe170000.pcie: IRQ msi not found
rk-pcie fe170000.pcie: use outband MSI support
rk-pcie fe170000.pcie: Missing *config* reg space
rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000
rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
rk-pcie fe170000.pcie: Missing *config* reg space
rk-pcie fe170000.pcie: invalid resource
rk-pcie fe150000.pcie: IRQ msi not found
rk-pcie fe150000.pcie: use outband MSI support
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000
rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: invalid resource
mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
mpp_vdpu2 fdb50400.vdpu: probe device
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: probing finish
mpp_vepu2 jpege-ccu: probing start
mpp_vepu2 jpege-ccu: probing finish
mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
mpp_vepu2 fdb50000.vepu: probing start
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: probing finish
mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
mpp_vepu2 fdba0000.jpege-core: probing start
mpp_vepu2 fdba0000.jpege-core: attach ccu success
mpp_vepu2 fdba0000.jpege-core: probing finish
mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
mpp_vepu2 fdba4000.jpege-core: probing start
mpp_vepu2 fdba4000.jpege-core: attach ccu success
mpp_vepu2 fdba4000.jpege-core: probing finish
mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
mpp_vepu2 fdba8000.jpege-core: probing start
mpp_vepu2 fdba8000.jpege-core: attach ccu success
mpp_vepu2 fdba8000.jpege-core: probing finish
mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
mpp_vepu2 fdbac000.jpege-core: probing start
mpp_vepu2 fdbac000.jpege-core: attach ccu success
mpp_vepu2 fdbac000.jpege-core: probing finish
mpp-iep2 fdbb0000.iep: Adding to iommu group 9
mpp-iep2 fdbb0000.iep: probe device
mpp-iep2 fdbb0000.iep: allocate roi buffer failed
mpp-iep2 fdbb0000.iep: probing finish
mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
mpp_jpgdec fdb90000.jpegd: probe device
mpp_jpgdec fdb90000.jpegd: probing finish
mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
mpp_rkvenc2 rkvenc-ccu: probing start
mpp_rkvenc2 rkvenc-ccu: probing finish
mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbd0000 failed
mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbe0000 failed
mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
mpp_av1dec: Adding child /av1d@fdc70000
mpp_av1dec: register device av1d-master
mpp_av1dec av1d-master: av1_iommu_of_xlate,784
av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
mpp_av1dec av1d-master: Adding to iommu group 15
mpp_av1dec av1d-master: probing start
mpp_av1dec av1d-master: probing finish
mpp_service mpp-srv: probe success
dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-pvtm fda40000.pvtm: pvtm@0 probed
rockchip-pvtm fda50000.pvtm: pvtm@1 probed
rockchip-pvtm fda60000.pvtm: pvtm@2 probed
rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
rockchip-system-monitor rockchip-system-monitor: system monitor probe
random: crng init done
led_vk2c21_init
=============================================
rockchip-vop2 fdd90000.vop: Adding to iommu group 14
panel-simple panel-edp0: Looking up power-supply from device tree
panel-simple panel-edp0: Looking up power-supply property in node /panel-edp0 failed
panel-simple panel-edp0: supply power not found, using dummy regulator
brd: module loaded
loop: module loaded
zram: Added device: zram0
lkdtm: No crash points registered, enable through debugfs
system_heap: orders[0] = 6
system_heap: orders[1] = 4
system_heap: orders[2] = 0
ahci fe210000.sata: Looking up ahci-supply from device tree
ahci fe210000.sata: Looking up ahci-supply property in node /sata@fe210000 failed
ahci fe210000.sata: supply ahci not found, using dummy regulator
ahci fe210000.sata: Looking up phy-supply from device tree
ahci fe210000.sata: Looking up phy-supply property in node /sata@fe210000 failed
ahci fe210000.sata: supply phy not found, using dummy regulator
ahci fe210000.sata: Looking up target-supply from device tree
ahci fe210000.sata: Looking up target-supply property in node /sata@fe210000 failed
ahci fe210000.sata: supply target not found, using dummy regulator
ahci fe210000.sata: forcing port_map 0x0 -> 0x1
ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
scsi host0: ahci
ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 81
rockchip-spi feb20000.spi: no high_speed pinctrl state
rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
rk806 spi2.0: ON: 0x40 OFF:0x0
rk806-regulator rk806-regulator.4.auto: Looking up vcc1-supply from device tree
vdd_gpu_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.11: -ENOENT
vdd_gpu_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc2-supply from device tree
vdd_cpu_lit_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.12: -ENOENT
vdd_cpu_lit_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc3-supply from device tree
vdd_log_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.13: -ENOENT
vdd_log_s0: 675 750 mV at 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc4-supply from device tree
vdd_vdenc_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.14: -ENOENT
vdd_vdenc_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc5-supply from device tree
vdd_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.15: -ENOENT
vdd_ddr_s0: 675 900 mV at 850 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc6-supply from device tree
vdd2_ddr_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.16: -ENOENT
vdd2_ddr_s3: at 500 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc7-supply from device tree
vdd_2v0_pldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.17: -ENOENT
vdd_2v0_pldo_s3: 2000 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc8-supply from device tree
vcc_3v3_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.18: -ENOENT
vcc_3v3_s3: 3300 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc9-supply from device tree
vddq_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.19: -ENOENT
vddq_ddr_s0: at 500 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc10-supply from device tree
vcc_1v8_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.20: -ENOENT
vcc_1v8_s3: 1800 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.21: -ENOENT
vdd_0v75_s3: 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.22: -ENOENT
vdd_ddr_pll_s0: 850 mV, enabled
avdd_0v75_s0: Bringing 750000uV into 837500-837500uV
avdd_0v75_s0: ramp_delay not set
rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.23: -ENOENT
avdd_0v75_s0: 837 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc14-supply from device tree
vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.24: -ENOENT
vdd_0v85_s0: 850 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc14-supply from device tree
vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.25: -ENOENT
vdd_0v75_s0: 750 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.26: -ENOENT
avcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.27: -ENOENT
vcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.28: -ENOENT
avdd_1v2_s0: 1200 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc12-supply from device tree
vcc_3v3_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.29: -ENOENT
vcc_3v3_s0: 3300 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcc12-supply from device tree
vccio_sd_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.30: -ENOENT
vccio_sd_s0: 1800 3300 mV at 3300 mV, enabled
rk806-regulator rk806-regulator.4.auto: Looking up vcca-supply from device tree
pldo6_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.31: -ENOENT
pldo6_s3: 1800 mV, enabled
rk806 spi2.0: no sleep-setting state
rk806 spi2.0: no reset-setting pinctrl state
rk806 spi2.0: no dvs-setting pinctrl state
rockchip-spi feb20000.spi: register misc device rkspi-dev2
rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
spi-nor spi5.0: XT25F128B (16384 Kbytes) read_data x4
1 fixed-partitions partitions found on MTD device sfc_nor
Creating 1 MTD partitions on "sfc_nor":
0x000000000000-0x000001000000 : "loader"
usbcore: registered new interface driver rndis_wlan
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply property in node /power-management@fd8d8000/power-controller failed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform fc800000.usb: EHCI Host Controller
ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.160-legacy-rk35xx ehci_hcd
usb usb1: SerialNumber: fc800000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform fc880000.usb: EHCI Host Controller
ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.160-legacy-rk35xx ehci_hcd
usb usb2: SerialNumber: fc880000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform fc840000.usb: Generic Platform OHCI controller
ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 5.10.160-legacy-rk35xx ohci_hcd
usb usb3: SerialNumber: fc840000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform fc8c0000.usb: Generic Platform OHCI controller
ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: Generic Platform OHCI controller
usb usb4: Manufacturer: Linux 5.10.160-legacy-rk35xx ohci_hcd
usb usb4: SerialNumber: fc8c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
xhci-hcd xhci-hcd.5.auto: irq 128, io mem 0xfcd00000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb5: SerialNumber: xhci-hcd.5.auto
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb6: SerialNumber: xhci-hcd.5.auto
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
Error: Driver 'Goodix-TS' is already registered, aborting...
usbcore: registered new interface driver usbtouchscreen
input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
i2c /dev entries driver
rk860-regulator 0-0042: Looking up vin-supply from device tree
vdd_cpu_big0_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.32: -ENOENT
vdd_cpu_big0_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 1-0043: Looking up vin-supply from device tree
vdd_cpu_big1_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.33: -ENOENT
vdd_cpu_big1_s0: 550 1050 mV at 800 mV, enabled
rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
pci_bus 0002:20: root bus resource [bus 20-2f]
pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
pci_bus 0002:20: root bus resource [io 0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0002:20:00.0: supports D1 D2
pci 0002:20:00.0: PME# supported from D0 D1 D3hot
rk860-regulator 4-0042: Looking up vin-supply from device tree
vdd_npu_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.34: -ENOENT
vdd_npu_s0: 550 950 mV at 800 mV, enabled
pci 0002:20:00.0: Primary bus is hard wired to 0
pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0002:21:00.0: [10ec:b852] type 00 class 0x028000
pci 0002:21:00.0: reg 0x10: initial BAR value 0x00000000 invalid
pci 0002:21:00.0: reg 0x10: [io size 0x0100]
pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit]
pci 0002:21:00.0: PME# supported from D0 D3hot D3cold
rtc-hym8563 5-0051: rtc information is valid
rtc-hym8563 5-0051: registered as rtc0
rtc-hym8563 5-0051: setting system clock to 2024-03-11T20:51:36 UTC (1710190296)
rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x30011
rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-0f]
pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0]
pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])
pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]
pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400
pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
pci 0002:20:00.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0002:21:00.0: BAR 2: assigned [mem 0xf2200000-0xf22fffff 64bit]
pci 0002:21:00.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0002:20:00.0: PCI bridge to [bus 21]
pci 0002:20:00.0: bridge window [io 0x1000-0x1fff]
pci 0002:20:00.0: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [c0a9:540a] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
typec_fusb302 5-0022: Looking up vbus-supply from device tree
pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pcieport 0002:20:00.0: PME: Signaling with IRQ 141
typec_fusb302 6-0022: Looking up vbus-supply from device tree
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
pwm-fan pwm-fan: Looking up fan-supply from device tree
pwm-fan pwm-fan: Looking up fan-supply property in node /pwm-fan failed
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: bin=0
cpu cpu0: leakage=13
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: pvtm=1476
cpu cpu0: pvtm-volt-sel=3
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Looking up mem-supply from device tree
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: bin=0
cpu cpu4: leakage=11
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: pvtm=1706
ata1: SATA link down (SStatus 0 SControl 300)
cpu cpu4: pvtm-volt-sel=4
pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01
cpu cpu4: Looking up cpu-supply from device tree
pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref]
pci 0000:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff]
cpu cpu4: Looking up mem-supply from device tree
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: bin=0
cpu cpu6: leakage=11
cpu cpu6: Looking up cpu-supply from device tree
pcieport 0000:00:00.0: PME: Signaling with IRQ 152
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
usb 1-1: new high-speed USB device number 2 using ehci-platform
nvme nvme0: missing or invalid SUBNQN field.
cpu cpu6: pvtm=1713
cpu cpu6: pvtm-volt-sel=5
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: Looking up mem-supply from device tree
cpu cpu0: avs=0
cpu cpu4: avs=0
nvme nvme0: allocated 32 MiB host memory buffer.
cpu cpu6: avs=0
cpu cpu0: EM: OPP:816000 is inefficient
cpu cpu0: EM: OPP:600000 is inefficient
cpu cpu0: EM: created perf domain
cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
cpu cpu4: EM: OPP:816000 is inefficient
cpu cpu4: EM: OPP:600000 is inefficient
cpu cpu4: EM: created perf domain
cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
cpu cpu6: EM: OPP:816000 is inefficient
cpu cpu6: EM: OPP:600000 is inefficient
cpu cpu6: EM: created perf domain
cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
dwmmc_rockchip fe2d0000.mmc: No normal pinctrl state
dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
dwmmc_rockchip fe2d0000.mmc: No idle pinctrl state
dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 83,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply property in node /mmc@fe2c0000 failed
dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 84,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip fe2d0000.mmc: Looking up vmmc-supply from device tree
dwmmc_rockchip fe2d0000.mmc: Looking up vmmc-supply property in node /mmc@fe2d0000 failed
dwmmc_rockchip fe2d0000.mmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip fe2d0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2d0000 failed
dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
mmc_host mmc2: card is non-removable.
ledtrig-cpu: registered to indicate activity on CPUs
arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
cryptodev: driver 1.12 loaded.
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
optee: probing for conduit method.
optee: api uid mismatch
optee: probe of firmware:optee failed with error -22
usbcore: registered new interface driver snd-usb-audio
mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
rockchip-i2s-tdm fddf4000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
debugfs: File 'Capture' in directory 'dapm' already present!
input: rockchip-dp0 rockchip-dp0 as /devices/platform/dp0-sound/sound/card0/input1
debugfs: File 'Capture' in directory 'dapm' already present!
input: rockchip-dp1 rockchip-dp1 as /devices/platform/dp1-sound/sound/card1/input2
Initializing XFRM netlink socket
NET: Registered protocol family 17
[BT_RFKILL]: Enter rfkill_rk_init
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
[WLAN_RFKILL]: can't find rockchip,grf property
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 143, flags = 0.
[WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[WLAN_RFKILL]: Exit rfkill_wlan_probe
Key type dns_resolver registered
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
pstore: Using crash dump compression: deflate
rga3_core0 fdb60000.rga: Adding to iommu group 2
rga: rga3_core0, irq = 35, match scheduler
rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core0 probe successfully
rga3_core1 fdb70000.rga: Adding to iommu group 3
rga: rga3_core1, irq = 36, match scheduler
rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core1 probe successfully
rga: rga2, irq = 37, match scheduler
rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
rga: rga2 probe successfully
rga_iommu: IOMMU binding successfully, default mapping core[0x1]
rga: Module initialized. v1.3.0
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1
mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-dmc dmc: Looking up center-supply from device tree
mali fb000000.gpu: Kernel DDK version g18p0-01eac0
mali fb000000.gpu: Looking up mali-supply from device tree
rockchip-dmc dmc: Looking up mem-supply from device tree
mali fb000000.gpu: Looking up mem-supply from device tree
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
mali fb000000.gpu: Looking up mem-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
mali fb000000.gpu: bin=0
mali fb000000.gpu: leakage=28
mali fb000000.gpu: Looking up mali-supply from device tree
debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
rockchip-dmc dmc: Looking up center-supply from device tree
mali fb000000.gpu: pvtm=898
mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
vdd_ddr_s0: could not add device link dmc: -EEXIST
vdd_ddr_s0: Failed to create debugfs directory
rockchip-dmc dmc: Looking up mem-supply from device tree
mali fb000000.gpu: pvtm-volt-sel=4
mali fb000000.gpu: avs=0
W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
vdd_log_s0: could not add device link dmc: -EEXIST
vdd_log_s0: Failed to create debugfs directory
rockchip-dmc dmc: bin=0
rockchip-dmc dmc: leakage=52
rockchip-dmc dmc: leakage-volt-sel=2
rockchip-dmc dmc: soc version=0, speed=2
rockchip-dmc dmc: avs=0
rockchip-dmc dmc: current ATF version 0x100
rockchip-dmc dmc: normal_rate = 1560000000
rockchip-dmc dmc: reboot_rate = 2112000000
rockchip-dmc dmc: suspend_rate = 528000000
rockchip-dmc dmc: video_4k_rate = 1560000000
rockchip-dmc dmc: video_4k_10b_rate = 1560000000
rockchip-dmc dmc: video_svep_rate = 1560000000
rockchip-dmc dmc: boost_rate = 2112000000
rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
rockchip-dmc dmc: performance_rate = 2112000000
rockchip-dmc dmc: hdmirx_rate = 2112000000
rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
rockchip-dmc dmc: failed to get vop pn to msch rl
rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
mali fb000000.gpu: falling back to closest match: r0p0 status 0
mali fb000000.gpu: Execution proceeding normally with fallback match
mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
mali fb000000.gpu: No priority control manager is configured
mali fb000000.gpu: No memory group manager is configured
mali fb000000.gpu: Protected memory allocator not available
mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
rockchip-dmc dmc: could not find power_model node
mmc0: Host Software Queue enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 58A43A 14.6 GiB
mmcblk0boot0: mmc0:0001 58A43A partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 58A43A partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 58A43A partition 3 4.00 MiB, chardev (237:0)
mmcblk0: p1 p2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 6
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 7
rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -517
rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -517
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart0-win0 as cursor plane for vp0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart1-win0 as cursor plane for vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart2-win0 as cursor plane for vp2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart3-win0 as cursor plane for vp3
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
mali fb000000.gpu: Probed as mali0
mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffff8000091c39a8)
rockchip-drm display-subsystem: bound fdec0000.edp (ops 0xffff8000091d0f88)
rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffff8000091d4838)
rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffff8000091d4838)
rockchip-drm display-subsystem: failed to parse loader memory
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB 2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
vendor storage:20190527 ret = 0
mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
rockchip-dp fdec0000.edp: failed to read max link rate
rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
[drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
rockchip-dp fdec0000.edp: failed to read max link rate
rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Adding to iommu group 0
RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
RKNPU fdab0000.npu: Looking up mem-supply from device tree
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[drm] Initialized rknpu 0.9.2 20230825 for fdab0000.npu on minor 1
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up mem-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: RKNPU: bin=0
RKNPU fdab0000.npu: leakage=14
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
rockchip-dp fdec0000.edp: failed to read max link rate
rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
RKNPU fdab0000.npu: pvtm=898
RKNPU fdab0000.npu: pvtm-volt-sel=4
RKNPU fdab0000.npu: avs=0
RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
RKNPU fdab0000.npu: failed to find power_model node
RKNPU fdab0000.npu: RKNPU: failed to initialize power model
RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
rockchip-pm rockchip-suspend: not set pwm-regulator-config
rockchip-suspend not set sleep-mode-config for mem-lite
rockchip-suspend not set wakeup-config for mem-lite
rockchip-suspend not set sleep-mode-config for mem-ultra
rockchip-suspend not set wakeup-config for mem-ultra
I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '07:51:33', on 'Feb 2 2024'.
Mali:
Mali device driver loaded
ALSA device list:
#0: rockchip-dp0
#1: rockchip-dp1
Freeing unused kernel memory: 7040K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
splash=verbose
ubootpart=766227c6-84ad-bb4c-9108-bac75438968d
cgroup_enable=memory
cgroup_memory=1
usb 1-1.1: new full-speed USB device number 3 using ehci-platform
usb 1-1.1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.76
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Microsoft® 2.4GHz Transceiver v8.0
usb 1-1.1: Manufacturer: Microsoft
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:0745.0001/input/input3
hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-fc800000.usb-1.1/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:0745.0002/input/input4
xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 7
xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002010010
xhci-hcd xhci-hcd.9.auto: irq 127, io mem 0xfc000000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb7: SerialNumber: xhci-hcd.9.auto
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 8
xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb8: SerialNumber: xhci-hcd.9.auto
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:0745.0002/input/input5
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-fc800000.usb-1.1/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:0745.0003/input/input6
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Control as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:0745.0003/input/input8
hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-fc800000.usb-1.1/input2
usb 1-1.4: new full-speed USB device number 4 using ehci-platform
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=b85b, bcdDevice= 0.00
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Bluetooth Radio
usb 1-1.4: Manufacturer: Realtek
usb 1-1.4: SerialNumber: 00e04c000001
phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 9
xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
xhci-hcd xhci-hcd.10.auto: irq 129, io mem 0xfc400000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb9: SerialNumber: xhci-hcd.10.auto
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 1 port detected
xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 10
xhci-hcd xhci-hcd.10.auto: Host supports USB 3.0 SuperSpeed
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 5.10.160-legacy-rk35xx xhci-hcd
usb usb10: SerialNumber: xhci-hcd.10.auto
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 1 port detected
usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: (null)
usb 8-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: AX88179A
usb 8-1: Manufacturer: ASIX
usb 8-1: SerialNumber: 008FEBC8
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to .
cdc_ncm 8-1:2.0: MAC-Address: f8:e4:3b:8f:eb:c8
cdc_ncm 8-1:2.0: setting rx_max = 16384
cdc_ncm 8-1:2.0: setting tx_max = 16384
cdc_ncm 8-1:2.0 eth0: register 'cdc_ncm' at usb-xhci-hcd.9.auto-1, CDC NCM, f8:e4:3b:8f:eb:c8
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/serial-getty.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice Slice /system/automount.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Restore / save the current clock...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
fuse: init (API version 7.32)
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Restore / save the current clock.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Starting Platform Persistent Storage Archival...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Platform Persistent Storage Archival.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Preparation for Local File Systems.
systemd[1]: Mounting Mount unit for bare, revision 5...
systemd[1]: Mounting Mount unit for chromium, revision 2769...
systemd[1]: Mounting Mount unit for core22, revision 1125...
squashfs: version 4.0 (2009/01/31) Phillip Lougher
systemd[1]: Mounting Mount unit for cups, revision 1025...
systemd[1]: Mounting Mount unit for gnome-42-2204, revision 143...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1535...
systemd[1]: Mounting Mount unit for snapd, revision 21185...
systemd[1]: Mounting /tmp...
systemd[1]: Mounted Mount unit for bare, revision 5.
systemd[1]: Mounted Mount unit for chromium, revision 2769.
systemd[1]: Mounted Mount unit for core22, revision 1125.
systemd[1]: Mounted Mount unit for cups, revision 1025.
systemd[1]: Mounted Mount unit for gnome-42-2204, revision 143.
systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1535.
systemd[1]: Mounted Mount unit for snapd, revision 21185.
systemd[1]: Mounted /tmp.
systemd[1]: Reached target Mounted snaps.
systemd[1]: Started Rule-based Manager for Device Events and Files.
systemd[1]: Finished Coldplug All udev Devices.
rtkm: rtkm_prealloc_init
rtkm: rtkm_init_phy
rtkm: rtkm_init_phy: memory expansion:1
rtkm: ====================== RTKM ======================
rtkm: order use peak alloc+ size
rtkm: --------------------------------------------------
rtkm: 1 0 0 4 32768
rtkm: 2 0 0 2 32768
rtkm: 3 0 0 2 65536
rtkm: 4 0 0 4 262144
rtkm: sum 0 0 12 393216
rtkm: rtkm_prealloc_init: done ret=0
usbcore: registered new interface driver btusb
rtk_btusb: Realtek Bluetooth USB driver ver 3.1.6d45ddf.20220519-142432
usbcore: registered new interface driver rtk_btusb
Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
systemd[1]: Found device /dev/ttyFIQ0.
Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 58003
rtl8852be 0002:21:00.0: enabling device (0000 -> 0003)
BUG: spinlock bad magic on CPU#7, systemd-udevd/400
lock: 0xffff80000adb1080, .magic: 00000000, .owner: /-1, .owner_cpu: 0
CPU: 7 PID: 400 Comm: systemd-udevd Not tainted 5.10.160-legacy-rk35xx #1
Hardware name: Fxblox RK1 (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x20/0x2c
dump_stack_lvl+0xc8/0xf8
dump_stack+0x18/0x34
spin_bug+0x90/0xb4
do_raw_spin_lock+0x40/0xdc
_raw_spin_lock+0x18/0x24
pq_push+0xbc/0x100 [8852be]
_phl_ser_mdl_init+0x128/0x1e4 [8852be]
bk_module_init+0x40/0x68 [8852be]
dispr_register_module+0x150/0x280 [8852be]
phl_disp_eng_register_module+0x48/0x5c [8852be]
phl_register_ser_module+0x28/0x34 [8852be]
rtw_phl_init+0x5b8/0x6a8 [8852be]
rtw_hw_init+0x5c/0x19c [8852be]
rtw_dev_probe+0x35c/0x4e8 [8852be]
pci_device_probe+0xbc/0x12c
really_probe+0x2dc/0x46c
driver_probe_device+0x134/0x144
device_driver_attach+0x4c/0x78
__driver_attach+0x9c/0x164
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xfc/0x210
driver_register+0xbc/0xf4
__pci_register_driver+0x6c/0x7c
rtw_drv_entry+0x58/0x1000 [8852be]
do_one_initcall+0x9c/0x1e0
do_init_module+0x58/0x1f4
load_module+0x1cf4/0x22bc
__do_sys_finit_module+0xe0/0x100
__arm64_sys_finit_module+0x24/0x30
el0_svc_common.constprop.0+0x13c/0x1ec
do_el0_svc+0x8c/0x98
el0_svc+0x20/0x30
el0_sync_handler+0xb4/0x134
el0_sync+0x1a0/0x1c0
systemd[1]: Started File System Check Daemon to report status.
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver cdc_mbim
cdc_ncm 8-1:2.0 enxf8e43b8febc8: renamed from eth0
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
systemd[1]: Mounting /boot...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load/Save RF Kill Switch Status...
FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
systemd[1]: Started Load/Save RF Kill Switch Status.
systemd[1]: Mounted /boot.
systemd[1]: Reached target Local File Systems.
systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
systemd[1]: Starting Armbian ZRAM config...
systemd[1]: Starting Set console font and keymap...
systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 581 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Finished Set console font and keymap.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Finished Set Up Additional Binary Formats.
usb 9-1: new full-speed USB device number 2 using xhci-hcd
zram0: detected capacity change from 0 to 4162732032
rockchip-dp fdec0000.edp: failed to read max link rate
rockchip-dp fdec0000.edp: failed to read max link rate
eric-tx CALL alloc_txring !!!!
eric-tx CALL alloc_txring !!!!
Adding 4065164k swap on /dev/zram0. Priority:5 extents:1 across:4065164k SS
rtl8852be 0002:21:00.0 wlP2p33s0: renamed from wlan1
zram: Added device: zram1
usb 9-1: New USB device found, idVendor=32ac, idProduct=0002, bcdDevice= 0.00
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: HDMI Expansion Card
usb 9-1: Manufacturer: Framework
usb 9-1: SerialNumber: 11AD1D00A49C40172F180B00
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p120, type: 10(if:400, flag:0x0) for vp1 dclk: 297000000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 2 dclk_core1 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 297000000, get 297000000
dw-dp fde60000.dp: full-training link: 4 lanes at 8100 MHz
dw-dp fde60000.dp: clock recovery succeeded
dw-dp fde60000.dp: channel equalization succeeded
Bluetooth: hci0: RTL: fw version 0xdbc6b20f
Console: switching to colour frame buffer device 240x67
rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
zram1: detected capacity change from 0 to 52428800
systemd[1]: Finished Armbian ZRAM config.
systemd[1]: Starting Armbian memory supported logging...
hid-generic 0003:32AC:0002.0004: hiddev97,hidraw3: USB HID v1.11 Device [Framework HDMI Expansion Card] on usb-xhci-hcd.10.auto-1/input1
EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
systemd[1]: Finished Armbian memory supported logging.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[744]: Received client request to flush runtime journal.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
cdc_ncm 8-1:2.0 enxf8e43b8febc8: 0 kbit/s downlink 0 kbit/s uplink
cdc_ncm 8-1:2.0 enxf8e43b8febc8: 0 kbit/s downlink 0 kbit/s uplink
IPv6: ADDRCONF(NETDEV_CHANGE): enxf8e43b8febc8: link becomes ready
rockchip-dp fdec0000.edp: failed to read max link rate
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
mali fb000000.gpu: Loading Mali firmware 0x1010000
mali fb000000.gpu: Mali firmware git_sha: ee476db42870778306fa8d559a605a73f13e455c
ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
rockchip-vop2 fdd90000.vop: [drm:vop2_setup_port_mux] *ERROR* wait port_mux done timeout: 0x7531--0x7530
audit: type=1326 audit(1710190307.692:2): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2220 comm="cupsd" exe="/snap/cups/1025/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff89ef910c code=0x50000
audit: type=1326 audit(1710190308.229:3): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2220 comm="cupsd" exe="/snap/cups/1025/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff89ef910c code=0x50000
audit: type=1326 audit(1710190308.245:4): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2233 comm="cups-browsed" exe="/snap/cups/1025/sbin/cups-browsed" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffff87cd1c28 code=0x50000
IPv6: ADDRCONF(NETDEV_CHANGE): wlP2p33s0: link becomes ready
br-135b083e3eeb: port 1(veth5c9489c) entered blocking state
br-135b083e3eeb: port 1(veth5c9489c) entered disabled state
device veth5c9489c entered promiscuous mode
br-135b083e3eeb: port 1(veth5c9489c) entered blocking state
br-135b083e3eeb: port 1(veth5c9489c) entered forwarding state
br-135b083e3eeb: port 1(veth5c9489c) entered disabled state
eth0: renamed from veth2633233
IPv6: ADDRCONF(NETDEV_CHANGE): veth5c9489c: link becomes ready
br-135b083e3eeb: port 1(veth5c9489c) entered blocking state
br-135b083e3eeb: port 1(veth5c9489c) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br-135b083e3eeb: link becomes ready
br-135b083e3eeb: port 2(vethb6156c6) entered blocking state
br-135b083e3eeb: port 2(vethb6156c6) entered disabled state
device vethb6156c6 entered promiscuous mode
eth0: renamed from vethba95ee1
IPv6: ADDRCONF(NETDEV_CHANGE): vethb6156c6: link becomes ready
br-135b083e3eeb: port 2(vethb6156c6) entered blocking state
br-135b083e3eeb: port 2(vethb6156c6) entered forwarding state
rockchip-dp fdec0000.edp: failed to read max link rate
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 10(if:400, flag:0x0) for vp1 dclk: 148500000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 2 dclk_core1 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000
dw-dp fde60000.dp: full-training link: 4 lanes at 8100 MHz
dw-dp fde60000.dp: clock recovery succeeded
dw-dp fde60000.dp: channel equalization succeeded
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
br-135b083e3eeb: port 3(veth9b592bd) entered blocking state
br-135b083e3eeb: port 3(veth9b592bd) entered disabled state
device veth9b592bd entered promiscuous mode
eth0: renamed from veth617c240
IPv6: ADDRCONF(NETDEV_CHANGE): veth9b592bd: link becomes ready
br-135b083e3eeb: port 3(veth9b592bd) entered blocking state
br-135b083e3eeb: port 3(veth9b592bd) entered forwarding state
br-135b083e3eeb: port 4(vetha5f5f8d) entered blocking state
br-135b083e3eeb: port 4(vetha5f5f8d) entered disabled state
device vetha5f5f8d entered promiscuous mode
eth0: renamed from veth1100b5e
IPv6: ADDRCONF(NETDEV_CHANGE): vetha5f5f8d: link becomes ready
br-135b083e3eeb: port 4(vetha5f5f8d) entered blocking state
br-135b083e3eeb: port 4(vetha5f5f8d) entered forwarding state
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000
RKNPU fdab0000.npu: RKNPU: set rknpu freq: 300000000, volt: 675000