dmesg - graph1
------
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE-p3 #0: Mon Dec 11 04:56:01 UTC 2023
root@amd64-builder.daemonology.net:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 ( llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (2930.54-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff
Features2=0x29ee3ff
AMD Features=0x2c100800
AMD Features2=0x1
Structured Extended Features3=0xc000000
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34361835520 (32770 MB)
avail memory = 33353351168 (31808 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20221020/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20221020/tbfadt-850)
ioapic0: MADT APIC ID 1 != hw id 0
ioapic1: MADT APIC ID 2 != hw id 0
ioapic2: MADT APIC ID 3 != hw id 0
ioapic0 irqs 0-23
ioapic1 irqs 24-47
ioapic2 irqs 48-71
Launching APs: 4 1 3 5 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0:
smbios0: at iomem 0xf9c00-0xf9c1e
smbios0: Version: 2.6, BCD Revision: 2.6
aesni0:
acpi0:
acpi0: Power Button (fixed)
cpu0: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0xf808-0xf80b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: on pcib0
pcib1: at device 1.0 on pci0
pci1: on pcib1
pcib2: at device 3.0 on pci0
pci2: on pcib2
vgapci0: port 0xc000-0xc07f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 24 at device 0.0 on pci2
vgapci0: Boot video device
hdac0: mem 0xe3000000-0xe3003fff irq 34 at device 0.1 on pci2
pcib3: at device 7.0 on pci0
pci3: on pcib3
pci0: at device 16.0 (no driver attached)
pci0: at device 16.1 (no driver attached)
pci0: at device 17.0 (no driver attached)
pci0: at device 17.1 (no driver attached)
pci0: at device 20.0 (no driver attached)
pci0: at device 20.1 (no driver attached)
pci0: at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
uhci0: port 0xb000-0xb01f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: port 0xb020-0xb03f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: port 0xb040-0xb05f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: mem 0xe6004800-0xe6004bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac1: mem 0xe6000000-0xe6003fff irq 21 at device 27.0 on pci0
pcib4: at device 28.0 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci4: on pcib4
pcib5: irq 20 at device 28.4 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci5: on pcib5
bge0: mem 0xe5000000-0xe500ffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: on bge0
brgphy0: PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: d8:d3:85:94:3b:95
pcib6: irq 21 at device 28.5 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci6: on pcib6
bge1: mem 0xe4000000-0xe400ffff irq 17 at device 0.0 on pci6
bge1: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus1: on bge1
brgphy1: PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: d8:d3:85:94:3b:94
uhci3: port 0xb060-0xb07f irq 20 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: port 0xb080-0xb09f irq 21 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: port 0xb0a0-0xb0bf irq 22 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: mem 0xe6004c00-0xe6004fff irq 20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib7: at device 30.0 on pci0
pci7: on pcib7
re0: port 0xd000-0xd0ff mem 0xe7001000-0xe70010ff irq 20 at device 4.0 on pci7
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
miibus2: on re0
rgephy0: PHY 1 on miibus2
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: c4:6e:1f:02:84:23
re0: netmap queues/slots: TX 1/256, RX 1/256
pci7: at device 9.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
ahci0: port 0xb100-0xb107,0xb110-0xb113,0xb108-0xb10f,0xb114-0xb117,0xb0c0-0xb0df mem 0xe6004000-0xe60047ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich2: at channel 2 on ahci0
ahcich3: at channel 3 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
pcib8: port 0xcf8-0xcff on acpi0
pcib8: Length mismatch for 5 range: 3e vs 3c
pci8: on pcib8
pcib9: at device 3.0 on pci8
pci9: on pcib9
pcib10: at device 7.0 on pci8
pci10: on pcib10
pcib11: at device 9.0 on pci8
pci11: on pcib11
mpt0: port 0xe000-0xe0ff mem 0xe8010000-0xe8013fff,0xe8000000-0xe800ffff irq 56 at device 0.0 on pci11
mpt0: MPI Version=1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pci8: at device 16.0 (no driver attached)
pci8: at device 16.1 (no driver attached)
pci8: at device 17.0 (no driver attached)
pci8: at device 17.1 (no driver attached)
pci8: at device 20.0 (no driver attached)
pci8: at device 20.1 (no driver attached)
pci8: at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
pcib12: on acpi0
pci12: on pcib12
acpi_button0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
orm0: at iomem 0xe9000-0xeffff pnpid ORM0000 on isa0
est0: on cpu0
Timecounter "TSC-low" frequency 1465227123 Hz quality 1000
Timecounters tick every 1.000 msec
ugen3.1: at usbus3
ugen2.1: at usbus2
ugen0.1: at usbus0
ugen5.1: at usbus5
ugen7.1: at usbus7
ugen6.1: at usbus6
uhub0 on usbus3
uhub1 on usbus6
uhub1: on usbus6
ugen1.1: at usbus1
uhub2 on usbus7
uhub3 on usbus5
uhub3: on usbus5
uhub4 on usbus0
uhub4: on usbus0
hdacc0: at cad 0 on hdac0
hdaa0: at nid 1 on hdacc0
pcm0: at nid 4 on hdaa0
pcm1: at nid 5 on hdaa0
pcm2: at nid 7 on hdaa0
hdacc1: at cad 0 on hdac1
hdaa1: at nid 1 on hdacc1
pcm3: at nid 21 and 24,25,26 on hdaa1
pcm4: at nid 27 on hdaa1
device_attach: ioapic0 attach returned 6
device_attach: ioapic0 attach returned 6
Trying to mount root from ufs:/dev/ada3p2 [rw]...
uhub5 on usbus1
uhub6 on usbus2
uhub2: on usbus7
uhub0: on usbus3
uhub6: on usbus2
uhub5: on usbus1
ugen4.1: at usbus4
uhub7 on usbus4
uhub7: on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ACS-3 ATA SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: ACS-3 ATA SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ada1: quirks=0x1
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: ACS-2 ATA SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
ada3: ATA8-ACS SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 457862MB (937703088 512 byte sectors)
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM: ada0: the primary GPT table is corrupt or invalid.
GEOM: ada0: using the secondary instead -- recovery strongly advised.
GEOM: diskid/DISK-WD-WX62AC216S9C: the primary GPT table is corrupt or invalid.
GEOM: diskid/DISK-WD-WX62AC216S9C: using the secondary instead -- recovery strongly advised.
GEOM: ada3: the secondary GPT table is corrupt or invalid.
GEOM: ada3: using the primary only -- recovery suggested.
uhub1: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
GEOM: ada1: the primary GPT table is corrupt or invalid.
GEOM: ada1: using the secondary instead -- recovery strongly advised.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
GEOM: diskid/DISK-ZFN4LPB2: the primary GPT table is corrupt or invalid.
GEOM: diskid/DISK-ZFN4LPB2: using the secondary instead -- recovery strongly advised.
Root mount waiting for: usbus3 usbus7
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
Root mount waiting for: usbus3 usbus7
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
uhub2: 6 ports with 6 removable, self powered
uhub0: 6 ports with 6 removable, self powered
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
GEOM: diskid/DISK-A1103011220000028: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-A1103011220000028: using the primary only -- recovery suggested.
nvidia0: on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 535.146.02 Sun Dec 3 13:40:40 UTC 2023
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
acpi_wmi0: on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
ugen5.2: at usbus5
ukbd0 on uhub3
ukbd0: on usbus5
kbd2 at ukbd0
ugen5.3: at usbus5
re0: link state changed to DOWN
lo0: link state changed to UP
bge1: link state changed to DOWN
ums0 on uhub3
ums0: on usbus5
ums0: 3 buttons and [XYZ] coordinates ID=0
bge1: link state changed to UP
device_attach: ioapic0 attach returned 6
device_attach: ioapic0 attach returned 6
device_attach: ioapic0 attach returned 6
device_attach: ioapic0 attach returned 6
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12