dmesg - glmark2
user_ivc_mempool: hypervisor not present
usbcore: registered new interface driver snd-usb-audio
u32 classifier
input device check on
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0ba1029fc6f017a5799ba6647bd97a2ccae2c97a'
tegra194-pcie 14180000.pcie: Adding to iommu group 9
tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14100000.pcie: Adding to iommu group 10
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: Adding to iommu group 11
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Adding to iommu group 12
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13
host1x 13e40000.host1x: Adding to iommu group 14
host1x 13e40000.host1x: initialized
iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15
iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16
iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17
iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18
iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19
iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20
iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21
iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22
iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23
iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24
iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25
iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26
iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27
iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28
iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29
iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30
iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000)
falcon 15340000.vic: Adding to iommu group 31
falcon 15340000.vic: initialized
falcon 15380000.nvjpg: Adding to iommu group 32
falcon 15380000.nvjpg: initialized
falcon 15540000.nvjpg1: Adding to iommu group 33
falcon 15540000.nvjpg1: initialized
falcon 154c0000.nvenc: Adding to iommu group 34
falcon 154c0000.nvenc: initialized
falcon 15a50000.ofa: Adding to iommu group 35
falcon 15a50000.ofa: initialized
nvdec 15480000.nvdec: Adding to iommu group 36
nvdec 15480000.nvdec: initialized
tsec 15500000.tsec: Adding to iommu group 37
tsec 15500000.tsec: initialized
gic 2a41000.agic-controller: GIC IRQ controller registered
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
gpio-394 (camera-control-output-low): hogged as output/low
gpio-397 (camera-control-output-low): hogged as output/low
gpio-487 (camera-control-output-low): hogged as output/low
gpio-486 (camera-control-output-low): hogged as output/low
gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio
gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
random: crng init done
misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
tegra194-isp5 14800000.isp: Adding to iommu group 38
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39
tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized
scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000)
pva 16000000.pva0: Adding to iommu group 49
pva 16000000.pva0: initialized
nvdla 15880000.nvdla0: Adding to iommu group 50
nvdla 15880000.nvdla0: initialized
nvdla 158c0000.nvdla1: Adding to iommu group 51
nvdla 158c0000.nvdla1: initialized
tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2
tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels
tegra-fuse-burn efuse-burn: shutdown limit check disabled
tegra-fuse-burn efuse-burn: Fuse burn driver initialized
tegra-xusb 3610000.xhci: Firmware timestamp: 2023-02-10 03:48:10 UTC, Version: 80.05 release
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810
tegra-xusb 3610000.xhci: irq 230, io mem 0x03610000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb1: SerialNumber: 3610000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
st_mag40 7-001e: failed to read Who-Am-I register.
st_mag40: probe of 7-001e failed with error -121
sht4x: probe of 7-0044 failed with error -121
inv-icm42600-i2c: probe of 7-0068 failed with error -121
tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2006000 KHz, changing to: 2035200 KHz
cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz
tegra194-cpufreq e000000.ccplex: probed with ICC
tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 14180000.pcie: host bridge /pcie@14180000 ranges:
tegra194-pcie 14180000.pcie: IO 0x0038100000..0x00381fffff -> 0x0038100000
tegra194-pcie 14180000.pcie: MEM 0x2728000000..0x272fffffff -> 0x0040000000
tegra194-pcie 14180000.pcie: MEM 0x2440000000..0x2727ffffff -> 0x2440000000
mmc0: CQHCI version 5.10
irq: IRQ297: trimming hierarchy from :interrupt-controller@f400000-1
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 297
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit
usb 1-3: new full-speed USB device number 2 using tegra-xusb
tegra194-pcie 14180000.pcie: Link up
tegra194-pcie 14180000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff])
pci_bus 0000:00: root bus resource [mem 0x2728000000-0x272fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0000:00: root bus resource [mem 0x2440000000-0x2727ffffff pref]
pci 0000:00:00.0: [10de:229c] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: [8086:2526] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
mmc0: Command Queue Engine enabled
mmc0: periodic cache flush enabled
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 G1M15M 59.3 GiB
mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0)
pci 0000:00:00.0: BAR 14: assigned [mem 0x2728000000-0x27280fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x2728000000-0x2728003fff 64bit]
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [mem 0x2728000000-0x27280fffff]
pci 0000:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512
pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
pcieport 0000:00:00.0: Adding to iommu group 9
pcieport 0000:00:00.0: PME: Signaling with IRQ 64
pcieport 0000:00:00.0: AER: enabled with IRQ 64
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
usb 1-3: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000
tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000
tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000
usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb
tegra194-pcie 14100000.pcie: Link up
tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff])
pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref]
pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
pci 0001:01:00.0: [8086:0d9f] type 00 class 0x020000
pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 7.f3
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB3.1 Hub
pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a81fffff]
usb 2-3: Manufacturer: VIA Labs, Inc.
pci 0001:01:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a80fffff]
usb 2-3: SerialNumber: 000000001
pci 0001:01:00.0: BAR 3: assigned [mem 0x20a8100000-0x20a8103fff]
hub 2-3:1.0: USB hub found
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
hub 2-3:1.0: 4 ports detected
pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a81fffff]
pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0001:00:00.0: Adding to iommu group 10
pcieport 0001:00:00.0: PME: Signaling with IRQ 66
pcieport 0001:00:00.0: AER: enabled with IRQ 66
igc 0001:01:00.0: Adding to iommu group 10
igc 0001:01:00.0: enabling device (0000 -> 0002)
igc 0001:01:00.0 (unnamed net_device) (uninitialized): PHC added
igc 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0001:01:00.0 eth0: MAC: 4c:62:7b:00:00:b9
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000
tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000
tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000
tegra194-pcie 14160000.pcie: Link up
tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff])
pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref]
pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot
pci 0004:01:00.0: [1d79:2264] type 00 class 0x010802
pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff]
pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit]
pci 0004:00:00.0: PCI bridge to [bus 01-ff]
pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff]
pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0004:00:00.0: Adding to iommu group 11
pcieport 0004:00:00.0: PME: Signaling with IRQ 68
pcieport 0004:00:00.0: AER: enabled with IRQ 68
nvme 0004:01:00.0: Adding to iommu group 11
nvme nvme0: pci function 0004:01:00.0
nvme 0004:01:00.0: enabling device (0000 -> 0002)
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
nvme nvme0: missing or invalid SUBNQN field.
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
vdd-3v3-pcie: supplied by vdd-3v3-sys
avdd-cam-2v8: supplied by vdd-3v3-sys
usb 1-4: new high-speed USB device number 3 using tegra-xusb
vdd-dp: supplied by vdd-3v3-sys
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
vdd-3v3-sd: supplied by vdd-3v3-sys
dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
(NULL device *): fops function table already registered
tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 297
usb 1-4: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 7.f3
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0 Hub
usb 1-4: Manufacturer: VIA Labs, Inc.
usb 1-4: SerialNumber: 000000001
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges:
tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000
tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000
tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000
usb 2-3.1: new SuperSpeedPlus Gen 2 USB device number 3 using tegra-xusb
usb 2-3.1: New USB device found, idVendor=2c7c, idProduct=0800, bcdDevice= 4.14
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: RM502Q-AE
usb 2-3.1: Manufacturer: Quectel
usb 2-3.1: SerialNumber: 5dc5af0c
usb 2-3.1: Enable of device-initiated U1 failed.
usb 2-3.1: Enable of device-initiated U2 failed.
qmi_wwan_q 2-3.1:1.4: cdc-wdm0: USB WDM device
qmi_wwan_q 2-3.1:1.4: Quectel RM502Q-AE work on RawIP mode
qmi_wwan_q 2-3.1:1.4: rx_urb_size = 31744
qmi_wwan_q 2-3.1:1.4 wwan0: register 'qmi_wwan_q' at usb-3610000.xhci-3.1, RMNET/USB device, 52:d7:ba:3a:ac:55
net wwan0: qmap_register_device wwan0_1
usb 2-3.1: Enable of device-initiated U1 failed.
usb 2-3.1: Enable of device-initiated U2 failed.
usb 1-4.4: new full-speed USB device number 4 using tegra-xusb
usb 1-4.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.4: Product: USB Receiver
usb 1-4.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.0/0003:046D:C534.0001/input/input0
mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.4/input0
input: Logitech USB Receiver Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/input/input1
input: Logitech USB Receiver Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/input/input2
input: Logitech USB Receiver System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/input/input3
hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.4/input1
tegra194-pcie 141a0000.pcie: Phy link never came up
tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref]
pci 0005:00:00.0: [10de:229a] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pcieport 0005:00:00.0: Adding to iommu group 12
pcieport 0005:00:00.0: PME: Signaling with IRQ 70
pcieport 0005:00:00.0: AER: enabled with IRQ 70
pci_bus 0005:01: busn_res: [bus 01-ff] is released
pci 0005:00:00.0: Removing from iommu group 12
pci_bus 0005:00: busn_res: [bus 00-ff] is released
irq: IRQ313: trimming hierarchy from :pmc@c360000
irq: IRQ314: trimming hierarchy from :interrupt-controller@f400000-1
irq: IRQ315: trimming hierarchy from :pmc@c360000
input: gpio-keys as /devices/platform/gpio-keys/input/input6
tegra-se-nvhost 15810000.se: Adding to iommu group 52
tegra-se-nvhost 15810000.se: initialized
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
tegra-se-nvhost 15820000.se: Adding to iommu group 53
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: Adding to iommu group 54
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
tegra_actmon d230000.actmon: in actmon_register()...
tegra_actmon d230000.actmon: bwmgr_disable = 1
tegra_actmon d230000.actmon: initialization Completed for the device mc_all
hvc_sysfs: hypervisor is not present
ALSA device list:
No soundcards found.
Freeing unused kernel memory: 4032K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
mminit_loglevel=4
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Switching from initrd to actual rootfs
systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /lib/systemd/system/sc-ups-monitor.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Reached target Mounted snaps.
systemd[1]: Reached target Swap.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
systemd[1]: Starting NVIDIA specific first-boot udev script...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
systemd[1]: Started Journal Service.
nvmap_heap_init: nvmap_heap_init: created heap block cache
tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216
tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout
tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272
tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
nvmap_page_pool_init: Total RAM pages: 7830401
nvmap_page_pool_init: nvmap page pool size: 978800 pages (3823 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB)
misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB)
systemd-journald[287]: Received client request to flush runtime journal.
spi-tegra114 3210000.spi: Adding to iommu group 2
spi-tegra114 3230000.spi: Adding to iommu group 2
irq: IRQ316: trimming hierarchy from :pmc@c360000
rt5640 8-001c: Device with ID register 0xffff790a is not rt5640/39
tegra-hda 3510000.hda: Adding to iommu group 55
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels
nvadsp 2993000.adsp: Adding to iommu group 56
nvadsp 2993000.adsp: in probe()...
nvidia: loading out-of-tree module taints kernel.
nvidia: module verification failed: signature and/or required key missing - tainting kernel
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input7
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input8
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input9
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input10
nvadsp 2993000.adsp: nvadsp_app_module_probe
irq: IRQ317: trimming hierarchy from :pmc@c360000
nct1008_nct72 4-004c: starting parse dt
nct1008_nct72 4-004c: !!!Found deprecated property!!!
nv_platform 13800000.display: Adding to iommu group 57
nct1008_nct72 4-004c: success parsing dt
platform 13800000.display:nvdisplay-niso: Adding to iommu group 58
nct1008_nct72 4-004c: success in enabling tmp451 VDD rail
NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64 35.3.1 Release Build (vince@vince-pc) 公曆 20廿三年 六月 十五日 週四 九時57分十秒
nct1008_nct72 4-004c: LOC shutdown limit 107
nct1008_nct72 4-004c: EXT shutdown limit 107
cpu-throttle-alert cooling device registered.
gpu-throttle-alert cooling device registered.
cv0-throttle-alert cooling device registered.
cv1-throttle-alert cooling device registered.
cv2-throttle-alert cooling device registered.
soc0-throttle-alert cooling device registered.
soc1-throttle-alert cooling device registered.
soc2-throttle-alert cooling device registered.
nct1008_nct72 4-004c: initial LOC temp: 40000
nct1008_nct72 4-004c: initial EXT temp: 41750
nct1008_nct72 4-004c: hi_b:-4, lo_b:0
nct1008_nct72 4-004c: nct1008_probe: initialized
hot-surface-alert cooling device registered.
tegra-asoc: sound: Adding to iommu group 56
tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 56
tegra210_adsp_audio_probe: platform probe started
tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1
tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot
tegra210-adsp tegra210-adsp: Default param-type to BYTE for src
tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1
tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec
tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire
tegra210-adsp tegra210-adsp: adma channel page address dt entry not found
tegra210-adsp tegra210-adsp: using adma channel page 0
nvadsp 2993000.adsp: ADSP OS firmware already loaded
Intel(R) Wireless WiFi driver for Linux
usbcore: registered new interface driver option
irq: IRQ319: trimming hierarchy from :pmc@c360000
option 2-3.1:1.0: GSM modem (1-port) converter detected
iwlwifi 0000:01:00.0: Adding to iommu group 9
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB0
option 2-3.1:1.1: GSM modem (1-port) converter detected
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB1
iwlwifi 0000:01:00.0: WRT: Overriding region id 0
option 2-3.1:1.2: GSM modem (1-port) converter detected
iwlwifi 0000:01:00.0: WRT: Overriding region id 1
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB2
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
ucsi_ccg 1-0008: Port-0: no role switch found
iwlwifi 0000:01:00.0: WRT: Overriding region id 2
option 2-3.1:1.3: GSM modem (1-port) converter detected
iwlwifi 0000:01:00.0: WRT: Overriding region id 3
usbcore: registered new interface driver btusb
iwlwifi 0000:01:00.0: WRT: Overriding region id 4
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB3
iwlwifi 0000:01:00.0: WRT: Overriding region id 6
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
iwlwifi 0000:01:00.0: WRT: Overriding region id 8
iwlwifi 0000:01:00.0: WRT: Overriding region id 9
iwlwifi 0000:01:00.0: WRT: Overriding region id 10
iwlwifi 0000:01:00.0: WRT: Overriding region id 11
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.4/input0
iwlwifi 0000:01:00.0: WRT: Overriding region id 15
iwlwifi 0000:01:00.0: WRT: Overriding region id 16
iwlwifi 0000:01:00.0: WRT: Overriding region id 18
iwlwifi 0000:01:00.0: WRT: Overriding region id 19
iwlwifi 0000:01:00.0: WRT: Overriding region id 20
iwlwifi 0000:01:00.0: WRT: Overriding region id 21
iwlwifi 0000:01:00.0: WRT: Overriding region id 28
iwlwifi 0000:01:00.0: loaded firmware version 46.4d093a30.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
tegra210-adsp tegra210-adsp: Loaded app wire
tegra210-adsp tegra210-adsp: Loaded app apm
tegra210-adsp tegra210-adsp: Loaded app adma
tegra210-adsp tegra210-adsp: Loaded app adma_tx
nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 0000000018780b78
tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered
cryptd: max_cpu_qlen set to 1000
EXT4-fs (nvme0n1p16): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (nvme0n1p17): mounted filesystem with ordered data mode. Opts: (null)
logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.4/input1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input11
input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input12
input: Logitech Wireless Keyboard PID:4023 System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input13
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.4/input1:1
input: Logitech Wireless Mouse PID:4022 Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input18
hid-generic 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.4/input1:2
nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000
using random self ethernet address
using random host ethernet address
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:01:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
iwlwifi 0000:01:00.0: base HW address: b0:3c:dc:fc:4b:3a
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone11: failed to read out thermal zone (-61)
input: Logitech Wireless Keyboard PID:4023 as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input22
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.4/input1:1
loop: module loaded
input: Logitech Wireless Mouse PID:4022 as /devices/platform/3610000.xhci/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input23
logitech-hidpp-device 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.4/input1:2
pstore: Using crash dump compression: deflate
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0x200000@0x82e800000, ecc: 0
ACPI: : failed to evaluate _DSM (0x1001)
ACPI: : failed to evaluate _DSM (0x1001)
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
rndis0: HOST MAC 62:1d:35:30:65:24
rndis0: MAC 62:1d:35:30:65:25
usb0: HOST MAC 62:1d:35:30:65:26
usb0: MAC 62:1d:35:30:65:27
tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled
nvgpu: 17000000.ga10b tpc_pg_mask_store:1067 [INFO] no value change, same mask already set
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
nvgpu: 17000000.ga10b gk20a_scale_init:539 [INFO] enabled scaling for GPU
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram0: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram0. Priority:5 extents:1 across:1957596k SS
zram1: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram1. Priority:5 extents:1 across:1957596k SS
zram2: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram2. Priority:5 extents:1 across:1957596k SS
zram3: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram3. Priority:5 extents:1 across:1957596k SS
zram4: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram4. Priority:5 extents:1 across:1957596k SS
zram5: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram5. Priority:5 extents:1 across:1957596k SS
zram6: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram6. Priority:5 extents:1 across:1957596k SS
zram7: detected capacity change from 0 to 2004582400
Adding 1957596k swap on /dev/zram7. Priority:5 extents:1 across:1957596k SS
fuse: init (API version 7.32)
nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64 35.3.1 Release Build (vince@vince-pc) 公曆 20廿三年 六月 十五日 週四 九時57分十一秒
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080013f result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080017e result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080014a result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x730190 result 0x56:
NVRM nvAssertFailedNoLog: Assertion failed: minRequiredIsoBandwidthKBPS