dmesg - P7
Linux version 6.5.12-100.fc37.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 12.3.1 20230508 (Red Hat 12.3.1-1), GNU ld version 2.38-27.fc37) #1 SMP PREEMPT_DYNAMIC Mon Nov 20 22:28:44 UTC 2023
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009cc19fff] usable
BIOS-e820: [mem 0x000000009cc1a000-0x000000009cc1afff] ACPI NVS
BIOS-e820: [mem 0x000000009cc1b000-0x000000009cc64fff] reserved
BIOS-e820: [mem 0x000000009cc65000-0x00000000ab3dcfff] usable
BIOS-e820: [mem 0x00000000ab3dd000-0x00000000ab783fff] reserved
BIOS-e820: [mem 0x00000000ab784000-0x00000000ab7c1fff] ACPI data
BIOS-e820: [mem 0x00000000ab7c2000-0x00000000abe26fff] ACPI NVS
BIOS-e820: [mem 0x00000000abe27000-0x00000000ac4fefff] reserved
BIOS-e820: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable
BIOS-e820: [mem 0x00000000ac500000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044dffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x981c2018-0x981dfa57] usable ==> usable
e820: update [mem 0x981c2018-0x981dfa57] usable ==> usable
e820: update [mem 0x981b1018-0x981c1457] usable ==> usable
e820: update [mem 0x981b1018-0x981c1457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000981b1017] usable
reserve setup_data: [mem 0x00000000981b1018-0x00000000981c1457] usable
reserve setup_data: [mem 0x00000000981c1458-0x00000000981c2017] usable
reserve setup_data: [mem 0x00000000981c2018-0x00000000981dfa57] usable
reserve setup_data: [mem 0x00000000981dfa58-0x000000009cc19fff] usable
reserve setup_data: [mem 0x000000009cc1a000-0x000000009cc1afff] ACPI NVS
reserve setup_data: [mem 0x000000009cc1b000-0x000000009cc64fff] reserved
reserve setup_data: [mem 0x000000009cc65000-0x00000000ab3dcfff] usable
reserve setup_data: [mem 0x00000000ab3dd000-0x00000000ab783fff] reserved
reserve setup_data: [mem 0x00000000ab784000-0x00000000ab7c1fff] ACPI data
reserve setup_data: [mem 0x00000000ab7c2000-0x00000000abe26fff] ACPI NVS
reserve setup_data: [mem 0x00000000abe27000-0x00000000ac4fefff] reserved
reserve setup_data: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable
reserve setup_data: [mem 0x00000000ac500000-0x00000000afffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000044dffffff] usable
efi: EFI v2.4 by American Megatrends
efi: ACPI=0xab790000 ACPI 2.0=0xab790000 SMBIOS=0xac272000 TPMFinalLog=0xabdc9000 ESRT=0xac1c9698 SMBIOS 3.0=0xac271000 MEMATTR=0xa86b3018 MOKvar=0xac270000 TPMEventLog=0x981e0018
efi: Remove mem45: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
e820: remove [mem 0xf0000000-0xf7ffffff] reserved
efi: Not removing mem46: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
efi: Not removing mem47: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem48: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem49: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot enabled
Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
SMBIOS 3.0.0 present.
DMI: Dell Inc. Latitude E5470/06DNG5, BIOS 1.32.3 07/12/2022
tsc: Detected 2700.000 MHz processor
tsc: Detected 2699.909 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x44e000 max_arch_pfn = 0x400000000
MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xac500 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000ac1c9698 to 0x00000000ac1c96d0.
Using GB pages for direct mapping
secureboot: Secure boot enabled
RAMDISK: [mem 0x981ea000-0x9a68bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000AB790000 000024 (v02 DELL )
ACPI: XSDT 0x00000000AB7900B0 0000E4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000AB7B3C30 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000AB790228 023A05 (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 0x00000000ABE24E80 000040
ACPI: UEFI 0x00000000AB7B4000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
ACPI: APIC 0x00000000AB7B4640 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000AB7B4700 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000AB7B4748 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x00000000AB7B4788 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x00000000AB7B47C0 00046D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x00000000AB7B4C30 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000AB7B4CC8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x00000000AB7B4F10 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x00000000AB7B7AC0 00094B (v02 INTEL xh_rvp07 00000000 INTL 20120913)
ACPI: DBGP 0x00000000AB7B8410 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x00000000AB7B8448 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000AB7B84A0 0035DA (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000AB7BBA80 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000AB7BBAC8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x00000000AB7BC940 003BFD (v02 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: MSDM 0x00000000AB7C0540 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x00000000AB7C0598 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: DMAR 0x00000000AB7C0710 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: BGRT 0x00000000AB7C07B8 000038 (v00 01072009 AMI 00010013)
ACPI: UEFI 0x00000000AB7C07F0 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
ACPI: TPM2 0x00000000AB7C0850 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: ASF! 0x00000000AB7C0888 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Reserving FACP table memory at [mem 0xab7b3c30-0xab7b3d3b]
ACPI: Reserving DSDT table memory at [mem 0xab790228-0xab7b3c2c]
ACPI: Reserving FACS table memory at [mem 0xabe24e80-0xabe24ebf]
ACPI: Reserving UEFI table memory at [mem 0xab7b4000-0xab7b4639]
ACPI: Reserving APIC table memory at [mem 0xab7b4640-0xab7b46fb]
ACPI: Reserving FPDT table memory at [mem 0xab7b4700-0xab7b4743]
ACPI: Reserving MCFG table memory at [mem 0xab7b4748-0xab7b4783]
ACPI: Reserving HPET table memory at [mem 0xab7b4788-0xab7b47bf]
ACPI: Reserving SSDT table memory at [mem 0xab7b47c0-0xab7b4c2c]
ACPI: Reserving LPIT table memory at [mem 0xab7b4c30-0xab7b4cc3]
ACPI: Reserving SSDT table memory at [mem 0xab7b4cc8-0xab7b4f0f]
ACPI: Reserving SSDT table memory at [mem 0xab7b4f10-0xab7b7abd]
ACPI: Reserving SSDT table memory at [mem 0xab7b7ac0-0xab7b840a]
ACPI: Reserving DBGP table memory at [mem 0xab7b8410-0xab7b8443]
ACPI: Reserving DBG2 table memory at [mem 0xab7b8448-0xab7b849b]
ACPI: Reserving SSDT table memory at [mem 0xab7b84a0-0xab7bba79]
ACPI: Reserving UEFI table memory at [mem 0xab7bba80-0xab7bbac1]
ACPI: Reserving SSDT table memory at [mem 0xab7bbac8-0xab7bc93a]
ACPI: Reserving SSDT table memory at [mem 0xab7bc940-0xab7c053c]
ACPI: Reserving MSDM table memory at [mem 0xab7c0540-0xab7c0594]
ACPI: Reserving SLIC table memory at [mem 0xab7c0598-0xab7c070d]
ACPI: Reserving DMAR table memory at [mem 0xab7c0710-0xab7c07b7]
ACPI: Reserving BGRT table memory at [mem 0xab7c07b8-0xab7c07ef]
ACPI: Reserving UEFI table memory at [mem 0xab7c07f0-0xab7c084b]
ACPI: Reserving TPM2 table memory at [mem 0xab7c0850-0xab7c0883]
ACPI: Reserving ASF! table memory at [mem 0xab7c0888-0xab7c092c]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044dffffff]
NODE_DATA(0) allocated [mem 0x44dfd5000-0x44dffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000044dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000009cc19fff]
node 0: [mem 0x000000009cc65000-0x00000000ab3dcfff]
node 0: [mem 0x00000000ac4ff000-0x00000000ac4fffff]
node 0: [mem 0x0000000100000000-0x000000044dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000044dffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 75 pages in unavailable ranges
On node 0, zone DMA32: 4386 pages in unavailable ranges
On node 0, zone Normal: 15104 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0xae000000-0xafffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xa876e000-0xa87b1fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x981b1000-0x981b1fff]
PM: hibernation: Registered nosave memory: [mem 0x981c1000-0x981c1fff]
PM: hibernation: Registered nosave memory: [mem 0x981c2000-0x981c2fff]
PM: hibernation: Registered nosave memory: [mem 0x981df000-0x981dffff]
PM: hibernation: Registered nosave memory: [mem 0x9cc1a000-0x9cc1afff]
PM: hibernation: Registered nosave memory: [mem 0x9cc1b000-0x9cc64fff]
PM: hibernation: Registered nosave memory: [mem 0xa876e000-0xa87b1fff]
PM: hibernation: Registered nosave memory: [mem 0xab3dd000-0xab783fff]
PM: hibernation: Registered nosave memory: [mem 0xab784000-0xab7c1fff]
PM: hibernation: Registered nosave memory: [mem 0xab7c2000-0xabe26fff]
PM: hibernation: Registered nosave memory: [mem 0xabe27000-0xac4fefff]
PM: hibernation: Registered nosave memory: [mem 0xac500000-0xafffffff]
PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0xb0000000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.12-100.fc37.x86_64", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 4101188
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 8.
Memory: 16165168K/16665788K available (18432K kernel code, 3267K rwdata, 14472K rodata, 4524K init, 17372K bss, 500360K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 53631 entries in 210 pages
ftrace: allocated 210 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000ab4ff000 end: 0x000000ab51efff
DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=2699909)
x86/cpu: SGX disabled by BIOS.
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
RETBleed: Mitigation: IBRS
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
TAA: Mitigation: TSX disabled
MMIO Stale Data: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
GDS: Vulnerable: No microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 48K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
Yama: becoming mindful.
SELinux: Initializing.
LSM support for eBPF active
landlock: Up and running.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 2032
Estimated ratio of average max frequency by base frequency (times 1024): 1213
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
MDS CPU bug present and SMT on, data leak possible. See for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See for more details.
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (43198.54 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x9cc1a000-0x9cc1afff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xab7c2000-0xabe26fff] (6705152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:09:36, date: 2024-02-11
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1707660576.058:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A4481226000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A44817DAC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A4481224000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A44817A0C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xef240000-0xef247fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xef230000-0xef23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xef257000-0xef257fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xef256000-0xef256fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xef255000-0xef255fff]
pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
pci 0000:00:17.0: reg 0x10: [mem 0xef250000-0xef251fff]
pci 0000:00:17.0: reg 0x14: [mem 0xef254000-0xef2540ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xef253000-0xef2537ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xef24c000-0xef24ffff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xef248000-0xef24bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xef220000-0xef22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xef252000-0xef2520ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xef200000-0xef21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xef100000-0xef101fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x14: [mem 0xef000000-0xef000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 11
ACPI: PCI: Interrupt link LNKF configured for IRQ 11
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: EC: GPE=0x14
ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x981b1018-0x9bffffff]
e820: reserve RAM buffer [mem 0x981c2018-0x9bffffff]
e820: reserve RAM buffer [mem 0x9cc1a000-0x9fffffff]
e820: reserve RAM buffer [mem 0xa876e000-0xabffffff]
e820: reserve RAM buffer [mem 0xab3dd000-0xabffffff]
e820: reserve RAM buffer [mem 0xac500000-0xafffffff]
e820: reserve RAM buffer [mem 0x44e000000-0x44fffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 7 [mem 0x000e4000-0x000effff window]
pci_bus 0000:00: resource 8 [mem 0xb0000000-0xefffffff window]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xef100000-0xef1fffff]
pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
PCI: CLS 0 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000a46b3000-0x00000000a86b3000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function avx
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 37512K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.0: AER: enabled with IRQ 122
pcieport 0000:00:1c.2: PME: Signaling with IRQ 123
pcieport 0000:00:1c.2: AER: enabled with IRQ 123
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: button: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: button: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM] (25 C)
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2)
ACPI: battery: Slot [BAT0] (battery present)
ACPI: bus type drm_connector registered
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
fbcon: Deferring console take-over
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xd impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part ems sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253100 irq 124
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253200 irq 124
ata4: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253280 irq 124
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.12-100.fc37.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.12-100.fc37.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2024-02-11T14:09:37 UTC (1707660577)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pstate: HWP enabled
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1064000763, 3616966)->(1084613304, -16995575)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 75832d82f8b9f24fe6be8ec93fdf27bff13a90a0'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type trusted registered
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Problem loading X.509 certificate -126
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 75832d82f8b9f24fe6be8ec93fdf27bff13a90a0'
ima: Allocated hash algorithm: sha256
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
audit: type=1807 audit(1707660577.591:2): action=measure func=KEXEC_KERNEL_CHECK res=1
audit: type=1807 audit(1707660577.591:3): action=measure func=MODULE_CHECK res=1
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
usb 1-6: new full-speed USB device number 2 using xhci_hcd
PM: Magic number: 12:900:181
acpi device:40: hash matches
RAS: Correctable Errors collector initialized.
Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
clk: Disabling unused clocks
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-11: WD Blue SA510 M.2 2280 1000GB, 52020100, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: Features: Dev-Sleep
tsc: Refined TSC clocksource calibration: 2712.044 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717aff8898, max_idle_ns: 440795316087 ns
clocksource: Switched to clocksource tsc
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WD Blue SA510 M. 0100 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-10: new full-speed USB device number 3 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
ata3: SATA link down (SStatus 4 SControl 300)
usb 1-11: new high-speed USB device number 4 using xhci_hcd
usb 1-11: New USB device found, idVendor=1bcf, idProduct=2b91, bcdDevice=57.27
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: Integrated_Webcam_HD
usb 1-11: Manufacturer: CNFEH63M49601789E922
ata4: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4524K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 1912K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.12-100.fc37.x86_64
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
systemd[1]: systemd 251.19-1.fc37 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Hostname set to .
Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
systemd[1]: bpf-lsm: Failed to load BPF object: No such process
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target local-fs.target - Local File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because all trigger condition checks failed.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Starting systemd-vconsole-setup.service - Setup Virtual Console...
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
audit: type=1130 audit(1707660578.709:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
audit: type=1130 audit(1707660578.717:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
fuse: init (API version 7.38)
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
audit: type=1130 audit(1707660578.740:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Started systemd-journald.service - Journal Service.
audit: type=1130 audit(1707660578.751:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707660578.757:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707660578.760:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707660578.765:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
BTRFS: device label fedora_localhost-live devid 1 transid 167604 /dev/sda3 scanned by (udev-worker) (412)
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d4:81:d7:5a:f1:e5
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device sda3): using free space tree
BTRFS info (device sda3): enabling ssd optimizations
BTRFS info (device sda3): auto enabling async discard
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
kauditd_printk_skb: 31 callbacks suppressed
audit: type=1130 audit(1707660581.628:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.628:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.629:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.630:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.630:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.630:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.632:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.632:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1707660581.632:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707660581.641:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-udevadm-cleanup-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[284]: Received SIGTERM from PID 1 (systemd).
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
systemd[1]: Successfully loaded SELinux policy in 122.943ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 26.914ms.
systemd[1]: systemd 251.19-1.fc37 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
systemd[1]: bpf-lsm: Failed to load BPF object: No such process
systemd-sysv-generator[587]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[587]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[587]: SysV service '/etc/rc.d/init.d/jexec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
block sda: the capability attribute has been deprecated.
systemd-gpt-auto-generator[580]: Failed to dissect: Permission denied
(sd-executor)[565]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
zram: Added device: zram0
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped initrd-switch-root.service - Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of a failed condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target getty.target - Login Prompts.
systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of a failed condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped systemd-fsck-root.service - File System Check on Root Device.
systemd[1]: Stopped systemd-journald.service - Journal Service.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
loop: module loaded
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
BTRFS info (device sda3: state M): use zstd compression, level 1
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
systemd[1]: modprobe@loop.service: Deactivated successfully.
systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: iscsi-onboot.service - Special handling of early boot iSCSI sessions was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/class/iscsi_session).
systemd[1]: ostree-remount.service - OSTree Remount OS/ Bind Mounts was skipped because of a failed condition check (ConditionKernelCommandLine=ostree).
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because all trigger condition checks failed.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: systemd-sysusers.service - Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[616]: Received client request to flush runtime journal.
zram0: detected capacity change from 0 to 16777216
Consider using thermal netlink events interface
input: DELL Wireless hotkeys as /devices/virtual/input/input9
Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS
parport_pc 00:06: [io 0x0378-0x037b]
parport_pc 00:06: activated
parport_pc 00:06: reported by Plug and Play ACPI
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000
pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
i2c i2c-7: 2/2 memory slots populated (from DMI)
i2c i2c-7: Successfully instantiated SPD at 0x50
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
input: PC Speaker as /devices/platform/pcspkr/input/input10
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
mc: Linux media interface: v0.10
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
videodev: Linux video capture interface: v2.00
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:01:00.0: Detected crf-id 0xbadcafe, cnv-id 0x3000000 wfpm id 0x80000000
iwlwifi 0000:01:00.0: PCI dev 24f3/0050, rev=0x201, rfid=0xd55555d5
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
ee1004 7-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
iTCO_vendor_support: vendor-support=0
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
dell_laptop: Using i8042 filter function for receiving events
iwlwifi 0000:01:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm
iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
usb 1-11: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b91)
EXT4-fs (sda2): mounted filesystem c03b9176-3dbe-4dfb-89c6-f86259dca8b6 r/w with ordered data mode. Quota mode: none.
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Bluetooth: hci0: Failed to send firmware data (-71)
Bluetooth: hci0: Intel reset sent to retry FW download
usb 1-6: USB disconnect, device number 2
usbcore: registered new interface driver uvcvideo
intel_tcc_cooling: Programmable TCC Offset detected
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
Bluetooth: hci0: sending frame failed (-19)
Bluetooth: hci0: Reading supported features failed (-19)
Bluetooth: hci0: Error reading debug features
Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x201
thermal thermal_zone8: failed to read out thermal zone (-61)
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
iwlwifi 0000:01:00.0: base HW address: f4:8c:50:17:28:2f, OTP minor version: 0x0
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered PF_QIPCRTR protocol family
iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=1)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
rfkill: input handler disabled
rfkill: input handler enabled
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
rfkill: input handler disabled
Lockdown: fwupd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.068 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.189 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1.00: configured for UDMA/133
PM: resume devices took 0.747 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
done.
random: crng reseeded on system resumption
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
usb 1-10: USB disconnect, device number 3
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 5 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=1)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.032 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.407 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 5
usb 1-10: new full-speed USB device number 6 using xhci_hcd
PM: suspend exit
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=10)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.102 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.186 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.545 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
OOM killer enabled.
Restarting tasks ...
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 6
PM: suspend exit
usb 1-10: new full-speed USB device number 7 using xhci_hcd
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=7)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.031 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.182 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.408 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 7
usb 1-10: new full-speed USB device number 8 using xhci_hcd
PM: suspend exit
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=7)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.048 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.192 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1.00: configured for UDMA/133
PM: resume devices took 0.697 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 8
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 9 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=10)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.090 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.574 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 9
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 10 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.030 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata1.00: configured for UDMA/133
PM: resume devices took 0.404 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 10
usb 1-10: new full-speed USB device number 11 using xhci_hcd
PM: suspend exit
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.032 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.183 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1.00: configured for UDMA/133
PM: resume devices took 0.720 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 11
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 12 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.078 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata1.00: configured for UDMA/133
PM: resume devices took 0.484 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 12
usb 1-10: new full-speed USB device number 13 using xhci_hcd
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: fwupd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.035 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.183 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
PM: resume devices took 0.803 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 13
PM: suspend exit
usb 1-10: new full-speed USB device number 14 using xhci_hcd
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
atkbd serio0: Unknown key pressed (translated set 2, code 0xba on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03a ' to make it known.
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.025 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.182 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.574 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
OOM killer enabled.
Restarting tasks ...
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 14
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 15 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.145 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.187 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.567 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 15
PM: suspend exit
usb 1-10: new full-speed USB device number 16 using xhci_hcd
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.036 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.189 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.402 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 16
usb 1-10: new full-speed USB device number 17 using xhci_hcd
PM: suspend exit
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=8)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from 24:a6:5e:04:b1:9a by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.080 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.405 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 17
usb 1-10: new full-speed USB device number 18 using xhci_hcd
PM: suspend exit
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
wlp1s0: authenticate with ea:cb:ac:91:ad:4d
wlp1s0: send auth to ea:cb:ac:91:ad:4d (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with ea:cb:ac:91:ad:4d (try 1/3)
wlp1s0: RX AssocResp from ea:cb:ac:91:ad:4d (capab=0x1511 status=0 aid=2)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by ea:cb:ac:91:ad:4d
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from ea:cb:ac:91:ad:4d by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.044 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.001 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.184 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
PM: resume devices took 0.564 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
done.
random: crng reseeded on system resumption
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
usb 1-10: USB disconnect, device number 18
PM: suspend exit
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: new full-speed USB device number 19 using xhci_hcd
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with f2:cb:ac:91:ac:6d
wlp1s0: send auth to f2:cb:ac:91:ac:6d (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with f2:cb:ac:91:ac:6d (try 1/3)
wlp1s0: RX AssocResp from f2:cb:ac:91:ac:6d (capab=0x1511 status=0 aid=13)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by f2:cb:ac:91:ac:6d
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
wlp1s0: deauthenticating from f2:cb:ac:91:ac:6d by local choice (Reason: 3=DEAUTH_LEAVING)
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
PM: suspend entry (deep)
Filesystems sync: 0.132 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
printk: Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ata1.00: Entering standby power mode
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend devices took 0.186 seconds
ACPI: EC: interrupt blocked
ACPI: PM: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
ACPI: PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: PM: Low-level resume complete
ACPI: EC: EC started
ACPI: PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: PM: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
i915 0000:00:02.0: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
usb 1-11: reset high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: Entering active power mode
ata1.00: configured for UDMA/133
PM: resume devices took 0.400 seconds
pcieport 0000:00:1c.0: PCI bridge to [bus 01]
pcieport 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff]
OOM killer enabled.
Restarting tasks ...
pcieport 0000:00:1c.2: PCI bridge to [bus 02]
pcieport 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff]
acpi PNP0401:00: Already enumerated
acpi PNP0501:00: Still not present
done.
random: crng reseeded on system resumption
usb 1-10: USB disconnect, device number 19
PM: suspend exit
usb 1-10: new full-speed USB device number 20 using xhci_hcd
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834, bcdDevice= 1.01
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: 5880
usb 1-10: Manufacturer: Broadcom Corp
usb 1-10: SerialNumber: 0123456789ABCD
wlp1s0: authenticate with 24:a6:5e:04:b1:9a
wlp1s0: send auth to 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:a6:5e:04:b1:9a (try 1/3)
wlp1s0: RX AssocResp from 24:a6:5e:04:b1:9a (capab=0x1831 status=0 aid=5)
wlp1s0: associated
wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:a6:5e:04:b1:9a
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
systemd-sysv-generator[121572]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[121572]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[121572]: SysV service '/etc/rc.d/init.d/jexec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-gpt-auto-generator[121565]: Failed to dissect: Permission denied