dmesg - old_cpu2

Return To old_cpu2 System Information

Linux version 6.6.13-100.fc38.x86_64 (mockbuild@a725ccb43d8b4c569ad03b6f8a7bef9e) (gcc (GCC) 13.2.1 20231011 (Red Hat 13.2.1-4), GNU ld version 2.39-16.fc38) #1 SMP PREEMPT_DYNAMIC Sat Jan 20 17:28:45 UTC 2024
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007eeb6fff] usable
BIOS-e820: [mem 0x000000007eeb7000-0x000000007efb8fff] reserved
BIOS-e820: [mem 0x000000007efb9000-0x000000007f8edfff] usable
BIOS-e820: [mem 0x000000007f8ee000-0x000000007fb6dfff] reserved
BIOS-e820: [mem 0x000000007fb6e000-0x000000007fb7dfff] ACPI data
BIOS-e820: [mem 0x000000007fb7e000-0x000000007fbfdfff] ACPI NVS
BIOS-e820: [mem 0x000000007fbfe000-0x000000007ff7bfff] usable
BIOS-e820: [mem 0x000000007ff7c000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000c37ffffff] usable
NX (Execute Disable) protection: active
APIC: Static calls initialized
e820: update [mem 0x7e236018-0x7e272e57] usable ==> usable
e820: update [mem 0x7e236018-0x7e272e57] usable ==> usable
e820: update [mem 0x7e215018-0x7e235057] usable ==> usable
e820: update [mem 0x7e215018-0x7e235057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000007e215017] usable
reserve setup_data: [mem 0x000000007e215018-0x000000007e235057] usable
reserve setup_data: [mem 0x000000007e235058-0x000000007e236017] usable
reserve setup_data: [mem 0x000000007e236018-0x000000007e272e57] usable
reserve setup_data: [mem 0x000000007e272e58-0x000000007eeb6fff] usable
reserve setup_data: [mem 0x000000007eeb7000-0x000000007efb8fff] reserved
reserve setup_data: [mem 0x000000007efb9000-0x000000007f8edfff] usable
reserve setup_data: [mem 0x000000007f8ee000-0x000000007fb6dfff] reserved
reserve setup_data: [mem 0x000000007fb6e000-0x000000007fb7dfff] ACPI data
reserve setup_data: [mem 0x000000007fb7e000-0x000000007fbfdfff] ACPI NVS
reserve setup_data: [mem 0x000000007fbfe000-0x000000007ff7bfff] usable
reserve setup_data: [mem 0x000000007ff7c000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x0000000c37ffffff] usable
efi: EFI v2.7 by EDK II
efi: SMBIOS=0x7f923000 ACPI=0x7fb7d000 ACPI 2.0=0x7fb7d014 MEMATTR=0x7e276698 MOKvar=0x7f91e000 RNG=0x7fb74018 
random: crng init done
efi: Remove mem136: MMIO range=[0xffc00000-0xffffffff] (4MB) from e820 map
e820: remove [mem 0xffc00000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Hypervisor detected: KVM
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: using sched offset of 7987999105 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
tsc: Detected 3649.998 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0xc38000 max_arch_pfn = 0x400000000
MTRR map: 4 entries (2 fixed + 2 variable; max 18), built from 8 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7ff7c max_arch_pfn = 0x400000000
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x729a7000-0x75f31fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007FB7D014 000024 (v02 BOCHS )
ACPI: XSDT 0x000000007FB7C0E8 000044 (v01 BOCHS  BXPCFACP 00000001      01000013)
ACPI: FACP 0x000000007FB78000 0000F4 (v03 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 0x000000007FB79000 002073 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 0x000000007FBDC000 000040
ACPI: APIC 0x000000007FB77000 0000B0 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: MCFG 0x000000007FB76000 00003C (v01 BOCHS  BXPCMCFG 00000001 BXPC 00000001)
ACPI: WAET 0x000000007FB75000 000028 (v01 BOCHS  BXPCWAET 00000001 BXPC 00000001)
ACPI: Reserving FACP table memory at [mem 0x7fb78000-0x7fb780f3]
ACPI: Reserving DSDT table memory at [mem 0x7fb79000-0x7fb7b072]
ACPI: Reserving FACS table memory at [mem 0x7fbdc000-0x7fbdc03f]
ACPI: Reserving APIC table memory at [mem 0x7fb77000-0x7fb770af]
ACPI: Reserving MCFG table memory at [mem 0x7fb76000-0x7fb7603b]
ACPI: Reserving WAET table memory at [mem 0x7fb75000-0x7fb75027]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000c37ffffff]
NODE_DATA(0) allocated [mem 0xc37fd5000-0xc37ffffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x0000000c37ffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x000000007eeb6fff]
  node   0: [mem 0x000000007efb9000-0x000000007f8edfff]
  node   0: [mem 0x000000007fbfe000-0x000000007ff7bfff]
  node   0: [mem 0x0000000100000000-0x0000000c37ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000c37ffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 258 pages in unavailable ranges
On node 0, zone DMA32: 784 pages in unavailable ranges
On node 0, zone Normal: 132 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x608
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7e215000-0x7e215fff]
PM: hibernation: Registered nosave memory: [mem 0x7e235000-0x7e235fff]
PM: hibernation: Registered nosave memory: [mem 0x7e236000-0x7e236fff]
PM: hibernation: Registered nosave memory: [mem 0x7e272000-0x7e272fff]
PM: hibernation: Registered nosave memory: [mem 0x7eeb7000-0x7efb8fff]
PM: hibernation: Registered nosave memory: [mem 0x7f8ee000-0x7fb6dfff]
PM: hibernation: Registered nosave memory: [mem 0x7fb6e000-0x7fb7dfff]
PM: hibernation: Registered nosave memory: [mem 0x7fb7e000-0x7fbfdfff]
PM: hibernation: Registered nosave memory: [mem 0x7ff7c000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0xafffffff]
PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xffffffff]
[mem 0xc0000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
kvm-guest: PV spinlocks disabled, no host support
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.6.13-100.fc38.x86_64", will be passed to user space.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 12092571
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 8.
Memory: 48062312K/49146916K available (18432K kernel code, 3276K rwdata, 14588K rodata, 4548K init, 5008K bss, 1084348K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 53990 entries in 211 pages
ftrace: allocated 211 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
APIC: Switch to symmetric I/O mode setup
x2apic enabled
APIC: Switched APIC routing to: physical x2apic
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped) preset value.. 7299.99 BogoMIPS (lpj=3649998)
AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Speculation Barrier for firmware calls
RETBleed: Mitigation: untrained return thunk
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See  for mitigation options.
Speculative Return Stack Overflow: Vulnerable: Safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 48K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
Yama: becoming mindful.
SELinux:  Initializing.
LSM support for eBPF active
landlock: Up and running.
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: AMD EPYC Processor (with IBPB) (family: 0x17, model: 0x1, stepping: 0x2)
RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
signal: max sigframe size: 1776
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 400.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 8
smpboot: Total of 8 processors activated (58399.96 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x7fb7e000-0x7fbfdfff] (524288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:16:49, date: 2024-02-07
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1707337009.071:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0x1000000000-0x17ffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.0: reg 0x10: [mem 0xc1249000-0xc1249fff]
pci 0000:00:02.1: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.1: reg 0x10: [mem 0xc1248000-0xc1248fff]
pci 0000:00:02.2: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.2: reg 0x10: [mem 0xc1247000-0xc1247fff]
pci 0000:00:02.3: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.3: reg 0x10: [mem 0xc1246000-0xc1246fff]
pci 0000:00:02.4: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.4: reg 0x10: [mem 0xc1245000-0xc1245fff]
pci 0000:00:02.5: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.5: reg 0x10: [mem 0xc1244000-0xc1244fff]
pci 0000:00:02.6: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.6: reg 0x10: [mem 0xc1243000-0xc1243fff]
pci 0000:00:02.7: [1b36:000c] type 01 class 0x060400
pci 0000:00:02.7: reg 0x10: [mem 0xc1242000-0xc1242fff]
pci 0000:00:03.0: [1b36:000c] type 01 class 0x060400
pci 0000:00:03.0: reg 0x10: [mem 0xc1241000-0xc1241fff]
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x20: [io  0xe240-0xe25f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc1240000-0xc1240fff]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0xe200-0xe23f]
pci 0000:01:00.0: [1af4:1041] type 00 class 0x020000
pci 0000:01:00.0: reg 0x14: [mem 0xc1000000-0xc1000fff]
pci 0000:01:00.0: reg 0x20: [mem 0x1010000000-0x1010003fff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xc1000000-0xc11fffff]
pci 0000:00:02.0:   bridge window [mem 0x1010000000-0x10100fffff 64bit pref]
pci 0000:02:00.0: [1b36:000d] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xc0e00000-0xc0e03fff 64bit]
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.1:   bridge window [mem 0xc0e00000-0xc0ffffff]
pci 0000:03:00.0: [1af4:1043] type 00 class 0x078000
pci 0000:03:00.0: reg 0x14: [mem 0xc0c00000-0xc0c00fff]
pci 0000:03:00.0: reg 0x20: [mem 0x1010100000-0x1010103fff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.2:   bridge window [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:02.2:   bridge window [mem 0x1010100000-0x10101fffff 64bit pref]
pci 0000:04:00.0: [1af4:1042] type 00 class 0x010000
pci 0000:04:00.0: reg 0x14: [mem 0xc0a00000-0xc0a00fff]
pci 0000:04:00.0: reg 0x20: [mem 0x1010200000-0x1010203fff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:02.3:   bridge window [mem 0xc0a00000-0xc0bfffff]
pci 0000:00:02.3:   bridge window [mem 0x1010200000-0x10102fffff 64bit pref]
pci 0000:05:00.0: [1af4:1045] type 00 class 0x00ff00
pci 0000:05:00.0: reg 0x20: [mem 0x1010300000-0x1010303fff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 05]
pci 0000:00:02.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:02.4:   bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:02.4:   bridge window [mem 0x1010300000-0x10103fffff 64bit pref]
pci 0000:06:00.0: [1af4:1044] type 00 class 0x00ff00
pci 0000:06:00.0: reg 0x20: [mem 0x1010400000-0x1010403fff 64bit pref]
pci 0000:00:02.5: PCI bridge to [bus 06]
pci 0000:00:02.5:   bridge window [io  0x9000-0x9fff]
pci 0000:00:02.5:   bridge window [mem 0xc0600000-0xc07fffff]
pci 0000:00:02.5:   bridge window [mem 0x1010400000-0x10104fffff 64bit pref]
pci 0000:07:00.0: [1002:6779] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0x1000000000-0x100fffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xc0400000-0xc041ffff 64bit]
pci 0000:07:00.0: reg 0x20: [io  0x8000-0x80ff]
pci 0000:07:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:00.0: Max Payload Size set to 128 (was 256, max 256)
pci 0000:07:00.0: supports D1 D2
pci 0000:00:02.6: PCI bridge to [bus 07]
pci 0000:00:02.6:   bridge window [io  0x8000-0x8fff]
pci 0000:00:02.6:   bridge window [mem 0xc0400000-0xc05fffff]
pci 0000:00:02.6:   bridge window [mem 0x1000000000-0x100fffffff 64bit pref]
pci 0000:08:00.0: [1002:aa98] type 00 class 0x040300
pci 0000:08:00.0: reg 0x10: [mem 0xc0200000-0xc0203fff 64bit]
pci 0000:08:00.0: Max Payload Size set to 128 (was 256, max 256)
pci 0000:08:00.0: supports D1 D2
pci 0000:00:02.7: PCI bridge to [bus 08]
pci 0000:00:02.7:   bridge window [io  0x7000-0x7fff]
pci 0000:00:02.7:   bridge window [mem 0xc0200000-0xc03fffff]
pci 0000:09:00.0: [1022:145c] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xc0000000-0xc00fffff 64bit]
pci 0000:09:00.0: Max Payload Size set to 128 (was 256, max 256)
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:00:03.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xc01fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 10
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 10
ACPI: PCI: Interrupt link LNKF configured for IRQ 10
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI: PCI: Interrupt link GSIA configured for IRQ 16
ACPI: PCI: Interrupt link GSIB configured for IRQ 17
ACPI: PCI: Interrupt link GSIC configured for IRQ 18
ACPI: PCI: Interrupt link GSID configured for IRQ 19
ACPI: PCI: Interrupt link GSIE configured for IRQ 20
ACPI: PCI: Interrupt link GSIF configured for IRQ 21
ACPI: PCI: Interrupt link GSIG configured for IRQ 22
ACPI: PCI: Interrupt link GSIH configured for IRQ 23
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.2: can't claim BAR 4 [io  0xe240-0xe25f]: address conflict with PCI Bus 0000:01 [io  0xe000-0xefff]
pci 0000:00:1f.3: can't claim BAR 4 [io  0xe200-0xe23f]: address conflict with PCI Bus 0000:01 [io  0xe000-0xefff]
e820: reserve RAM buffer [mem 0x7e215018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e236018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7eeb7000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f8ee000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ff7c000-0x7fffffff]
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: bridge control possible
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
pci 0000:07:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:02.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
pci 0000:00:02.1: BAR 15: assigned [mem 0x1010500000-0x10106fffff 64bit pref]
pci 0000:00:02.7: BAR 15: assigned [mem 0x1010700000-0x10108fffff 64bit pref]
pci 0000:00:03.0: BAR 15: assigned [mem 0x1010900000-0x1010afffff 64bit pref]
pci 0000:00:1f.3: BAR 4: assigned [io  0x1000-0x103f]
pci 0000:00:1f.2: BAR 4: assigned [io  0x1040-0x105f]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc1040000-0xc107ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xc1000000-0xc11fffff]
pci 0000:00:02.0:   bridge window [mem 0x1010000000-0x10100fffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.1:   bridge window [mem 0xc0e00000-0xc0ffffff]
pci 0000:00:02.1:   bridge window [mem 0x1010500000-0x10106fffff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.2:   bridge window [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:02.2:   bridge window [mem 0x1010100000-0x10101fffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:02.3:   bridge window [mem 0xc0a00000-0xc0bfffff]
pci 0000:00:02.3:   bridge window [mem 0x1010200000-0x10102fffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 05]
pci 0000:00:02.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:02.4:   bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:02.4:   bridge window [mem 0x1010300000-0x10103fffff 64bit pref]
pci 0000:00:02.5: PCI bridge to [bus 06]
pci 0000:00:02.5:   bridge window [io  0x9000-0x9fff]
pci 0000:00:02.5:   bridge window [mem 0xc0600000-0xc07fffff]
pci 0000:00:02.5:   bridge window [mem 0x1010400000-0x10104fffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xc0420000-0xc043ffff pref]
pci 0000:00:02.6: PCI bridge to [bus 07]
pci 0000:00:02.6:   bridge window [io  0x8000-0x8fff]
pci 0000:00:02.6:   bridge window [mem 0xc0400000-0xc05fffff]
pci 0000:00:02.6:   bridge window [mem 0x1000000000-0x100fffffff 64bit pref]
pci 0000:00:02.7: PCI bridge to [bus 08]
pci 0000:00:02.7:   bridge window [io  0x7000-0x7fff]
pci 0000:00:02.7:   bridge window [mem 0xc0200000-0xc03fffff]
pci 0000:00:02.7:   bridge window [mem 0x1010700000-0x10108fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:00:03.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:03.0:   bridge window [mem 0x1010900000-0x1010afffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: resource 9 [mem 0x1000000000-0x17ffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc11fffff]
pci_bus 0000:01: resource 2 [mem 0x1010000000-0x10100fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xc0e00000-0xc0ffffff]
pci_bus 0000:02: resource 2 [mem 0x1010500000-0x10106fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xc0c00000-0xc0dfffff]
pci_bus 0000:03: resource 2 [mem 0x1010100000-0x10101fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xc0a00000-0xc0bfffff]
pci_bus 0000:04: resource 2 [mem 0x1010200000-0x10102fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xc0800000-0xc09fffff]
pci_bus 0000:05: resource 2 [mem 0x1010300000-0x10103fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xc0600000-0xc07fffff]
pci_bus 0000:06: resource 2 [mem 0x1010400000-0x10104fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xc0400000-0xc05fffff]
pci_bus 0000:07: resource 2 [mem 0x1000000000-0x100fffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xc0200000-0xc03fffff]
pci_bus 0000:08: resource 2 [mem 0x1010700000-0x10108fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:09: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:09: resource 2 [mem 0x1010900000-0x1010afffff 64bit pref]
ACPI: \_SB_.GSIG: Enabled at IRQ 22
ACPI: \_SB_.GSIH: Enabled at IRQ 23
ACPI: \_SB_.GSIF: Enabled at IRQ 21
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000077f7e000-0x000000007bf7e000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function   avx       
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 54828K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:02.0: PME: Signaling with IRQ 24
pcieport 0000:00:02.0: AER: enabled with IRQ 24
pcieport 0000:00:02.0: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.1: PME: Signaling with IRQ 25
pcieport 0000:00:02.1: AER: enabled with IRQ 25
pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.2: PME: Signaling with IRQ 26
pcieport 0000:00:02.2: AER: enabled with IRQ 26
pcieport 0000:00:02.2: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.3: PME: Signaling with IRQ 27
pcieport 0000:00:02.3: AER: enabled with IRQ 27
pcieport 0000:00:02.3: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.4: PME: Signaling with IRQ 28
pcieport 0000:00:02.4: AER: enabled with IRQ 28
pcieport 0000:00:02.4: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.5: PME: Signaling with IRQ 29
pcieport 0000:00:02.5: AER: enabled with IRQ 29
pcieport 0000:00:02.5: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.6: PME: Signaling with IRQ 30
pcieport 0000:00:02.6: AER: enabled with IRQ 30
pcieport 0000:00:02.6: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:02.7: PME: Signaling with IRQ 31
pcieport 0000:00:02.7: AER: enabled with IRQ 31
pcieport 0000:00:02.7: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
pcieport 0000:00:03.0: PME: Signaling with IRQ 32
pcieport 0000:00:03.0: AER: enabled with IRQ 32
pcieport 0000:00:03.0: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: button: Power Button [PWRF]
00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ACPI: \_SB_.GSIA: Enabled at IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq only 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240100 irq 33
ata2: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240180 irq 33
ata3: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240200 irq 33
ata4: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240280 irq 33
ata5: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240300 irq 33
ata6: SATA max UDMA/133 abar m4096@0xc1240000 port 0xc1240380 irq 33
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.13-100.fc38.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.13-100.fc38.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 15 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:09:00.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.13-100.fc38.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:09:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.13-100.fc38.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:09:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2024-02-07T20:16:50 UTC (1707337010)
rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1762006491, 1243631)->(1830922951, -67672829)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 4b56aa1e4f05cfddcf89b6b27a264362cd9c9a34'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 4b56aa1e4f05cfddcf89b6b27a264362cd9c9a34'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
usb 1-1: new high-speed USB device number 2 using xhci_hcd
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
usb 3-1: new high-speed USB device number 2 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 28754-0000:00:02.1:00.0-1
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:02:00.0-1/input0
usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=86.00
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
PM:   Magic number: 12:342:295
tty tty28: hash matches
memory memory157: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 4548K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 1796K
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=86.00
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.0 Hub
usb 4-1: Manufacturer: GenesysLogic
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    rhgb
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.6.13-100.fc38.x86_64
systemd[1]: systemd 253.14-1.fc38 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
usb 3-2: new high-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: 4-Port USB 2.1 Hub
usb 3-2: Manufacturer: Generic
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.01
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: 4-Port USB 3.1 Hub
usb 4-2: Manufacturer: Generic
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
systemd[1]: bpf-lsm: LSM BPF program attached
usb 3-1.1: new high-speed USB device number 4 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.19
usb 3-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 3-1.1: Product: USB Storage
usb 3-1.1: Manufacturer: Generic
usb 3-1.1: SerialNumber: 000000000819
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target local-fs.target - Local File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Starting systemd-vconsole-setup.service - Setup Virtual Console...
systemd-journald[328]: Collecting audit messages is disabled.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
fuse: init (API version 7.39)
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
usb 3-2.4: new high-speed USB device number 5 using xhci_hcd
systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
systemd[1]: Started systemd-journald.service - Journal Service.
usb 3-2.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01
usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.4: Product: 4-Port USB 2.1 Hub
usb 3-2.4: Manufacturer: Generic
hub 3-2.4:1.0: USB hub found
hub 3-2.4:1.0: 4 ports detected
usb 4-2.4: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-2.4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.01
usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2.4: Product: 4-Port USB 3.1 Hub
usb 4-2.4: Manufacturer: Generic
hub 4-2.4:1.0: USB hub found
hub 4-2.4:1.0: 4 ports detected
usb 3-2.4.1: new high-speed USB device number 6 using xhci_hcd
usb 3-2.4.1: New USB device found, idVendor=0bda, idProduct=c820, bcdDevice= 2.00
usb 3-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.4.1: Product: 802.11ac NIC
usb 3-2.4.1: Manufacturer: Realtek
usb 3-2.4.1: SerialNumber: 123456
virtio_blk virtio2: 8/0/0 default/read/poll queues
virtio_blk virtio2: [vda] 536870912 512-byte logical blocks (275 GB/256 GiB)
 vda: vda1 vda2 vda3
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 3-1.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
virtio_net virtio0 enp1s0: renamed from eth0
BTRFS: device label fedora_localhost-live devid 1 transid 594108 /dev/vda3 scanned by (udev-worker) (478)
usb 3-2.4.2: new full-speed USB device number 7 using xhci_hcd
[drm] radeon kernel modesetting enabled.
radeon 0000:07:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xA004 0x00).
radeon 0000:07:00.0: No more image in the PCI ROM
ATOM BIOS: AMD
[drm] GPU not posted. posting now...
radeon 0000:07:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:07:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller without fan control
usb 3-2.4.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 3-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.4.2: Product: USB Receiver
usb 3-2.4.2: Manufacturer: Logitech
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:07:00.0: WB enabled
radeon 0000:07:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
radeon 0000:07:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
radeon 0000:07:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
radeon 0000:07:00.0: radeon: MSI limited to 32-bit
radeon 0000:07:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.0/0003:046D:C52B.0002/input/input5
hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:09:00.0-2.4.2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.1/0003:046D:C52B.0003/input/input6
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.1/0003:046D:C52B.0003/input/input7
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.1/0003:046D:C52B.0003/input/input8
hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:09:00.0-2.4.2/input1
hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:09:00.0-2.4.2/input2
usb 3-2.4.3: new high-speed USB device number 8 using xhci_hcd
usb 3-2.4.3: New USB device found, idVendor=1d6b, idProduct=0102, bcdDevice= 4.09
usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.4.3: Product: Webcam gadget
usb 3-2.4.3: Manufacturer: Linux Foundation
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0819 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Media removed, stopped polling
sd 6:0:0:0: [sda] Attached SCSI removable disk
usb 3-2.4.4: new full-speed USB device number 9 using xhci_hcd
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD4
[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Initialized radeon 2.50.0 20080528 for 0000:07:00.0 on minor 0
usb 3-2.4.4: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.4.4: Product: Yeti Stereo Microphone
usb 3-2.4.4: Manufacturer: Blue Microphones
usb 3-2.4.4: SerialNumber: REV8
input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.3/0003:B58E:9E84.0005/input/input10
[drm] fb mappable at 0x1000363000
[drm] vram apper at 0x1000000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
fbcon: Deferring console take-over
radeon 0000:07:00.0: [drm] fb0: radeondrmfb frame buffer device
hid-generic 0003:B58E:9E84.0005: input,hiddev98,hidraw4: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:09:00.0-2.4.4/input3
logitech-djreceiver 0003:046D:C52B.0004: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:09:00.0-2.4.2/input2
input: Logitech Wireless Device PID:408a Keyboard as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:408A.0006/input/input12
input: Logitech Wireless Device PID:408a Mouse as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:408A.0006/input/input13
hid-generic 0003:046D:408A.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-0000:09:00.0-2.4.2/input2:1
input: Logitech Wireless Device PID:4082 Keyboard as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:4082.0007/input/input17
input: Logitech Wireless Device PID:4082 Mouse as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:4082.0007/input/input18
hid-generic 0003:046D:4082.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-0000:09:00.0-2.4.2/input2:2
logitech-hidpp-device 0003:046D:408A.0006: HID++ 4.5 device connected.
input: Logitech MX Keys as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:408A.0006/input/input22
logitech-hidpp-device 0003:046D:408A.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:09:00.0-2.4.2/input2:1
[drm] amdgpu kernel modesetting enabled.
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
input: Logitech MX Master 3 as /devices/pci0000:00/0000:00:03.0/0000:09:00.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.2/0003:046D:C52B.0004/0003:046D:4082.0007/input/input23
logitech-hidpp-device 0003:046D:4082.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:09:00.0-2.4.2/input2:2
BTRFS info (device vda3): first mount of filesystem ddc0a0a3-607e-4607-aa4f-f03fa58a2dc4
BTRFS info (device vda3): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device vda3): using free space tree
BTRFS info (device vda3): auto enabling async discard
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd-journald[328]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1707337017.424:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
SELinux:  policy capability genfs_seclabel_symlinks=1
SELinux:  policy capability ioctl_skip_cloexec=0
audit: type=1403 audit(1707337017.581:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 158.112ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 79.259ms.
systemd[1]: systemd 253.14-1.fc38 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
zram: Added device: zram0
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped initrd-switch-root.service - Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-sshd\x2dkeygen.slice - Slice /system/sshd-keygen.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target getty.target - Login Prompts.
systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: iscsi-starter.service was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/var/lib/iscsi/nodes).
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped systemd-fsck-root.service - File System Check on Root Device.
systemd[1]: Stopped systemd-journald.service - Journal Service.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
loop: module loaded
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
BTRFS info (device vda3: state M): use zstd compression, level 1
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line.
systemd-journald[668]: Collecting audit messages is enabled.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Started systemd-journald.service - Journal Service.
audit: type=1130 audit(1707337018.814:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707337018.815:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707337018.833:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[668]: Received client request to flush runtime journal.
audit: type=1130 audit(1707337018.889:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1707337018.919:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[668]: /var/log/journal/f774aeef8f0643e987f279a9187939cb/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
systemd-journald[668]: Rotating system journal.
audit: type=1130 audit(1707337018.950:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1707337018.951:10): prog-id=54 op=LOAD
audit: type=1334 audit(1707337018.951:11): prog-id=55 op=LOAD
zram0: detected capacity change from 0 to 16777216
lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
input: PC Speaker as /devices/platform/pcspkr/input/input24
i801_smbus 0000:00:1f.3: Enabling SMBus device
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
mc: Linux media interface: v0.10
i2c i2c-8: 3/3 memory slots populated (from DMI)
i2c i2c-8: Memory type 0x07 not supported yet, not instantiating SPD
Adding 8388604k swap on /dev/zram0.  Priority:100 extents:1 across:8388604k SSDsc
EXT4-fs (vda2): mounted filesystem b4614b99-4612-4203-a1c6-9b7b7365aabe r/w with ordered data mode. Quota mode: none.
videodev: Linux video capture interface: v2.00
usb 3-2.4.3: Found UVC 1.00 device Webcam gadget (1d6b:0102)
iTCO_vendor_support: vendor-support=0
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver uvcvideo
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.7/0000:08:00.0/sound/card1/input25
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
usbcore: registered new interface driver btusb
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
usbcore: registered new interface driver snd-usb-audio
rtw_8821cu 3-2.4.1:1.2: Firmware version 24.11.0, H2C version 12
usbcore: registered new interface driver rtw_8821cu
rtw_8821cu 3-2.4.1:1.2 wlp9s0u2u4u1i2: renamed from wlan0
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
systemd-journald[668]: /var/log/journal/f774aeef8f0643e987f279a9187939cb/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
snd_hda_intel 0000:08:00.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input26
retire_capture_urb: 42 callbacks suppressed
retire_capture_urb: 350 callbacks suppressed
rfkill: input handler enabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
retire_capture_urb: 30 callbacks suppressed
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input27
input: solaar-keyboard as /devices/virtual/input/input28
logitech-hidpp-device 0003:046D:4082.0007: HID++ 4.5 device connected.
retire_capture_urb: 334 callbacks suppressed
usb 3-2.4.1: USB disconnect, device number 6
usb 3-2.4.1: new high-speed USB device number 10 using xhci_hcd
usb 3-2.4.1: device descriptor read/64, error -71
usb 3-2.4.1: New USB device found, idVendor=0bda, idProduct=c820, bcdDevice= 2.00
usb 3-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.4.1: Product: 802.11ac NIC
usb 3-2.4.1: Manufacturer: Realtek
usb 3-2.4.1: SerialNumber: 123456
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
rtw_8821cu 3-2.4.1:1.2: Firmware version 24.11.0, H2C version 12
rtw_8821cu 3-2.4.1:1.2 wlp9s0u2u4u1i2: renamed from wlan0
Bluetooth: hci0: RTL: fw version 0x75b8f098
Bluetooth: MGMT ver 1.22
usb 3-2.3: new high-speed USB device number 11 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.09
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: FP3
usb 3-2.3: Manufacturer: Fairphone
usb 3-2.3: SerialNumber: A20A119T0201
usb 3-2.3: USB disconnect, device number 11
usb 3-2.3: new high-speed USB device number 12 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.09
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: FP3
usb 3-2.3: Manufacturer: Fairphone
usb 3-2.3: SerialNumber: A20A119T0201
usb 3-2.3: reset high-speed USB device number 12 using xhci_hcd
usb 3-2.3: USB disconnect, device number 12
rfkill: input handler enabled
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input29
retire_capture_urb: 50 callbacks suppressed
retire_capture_urb: 342 callbacks suppressed
rfkill: input handler enabled
retire_capture_urb: 26 callbacks suppressed
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input30
input: solaar-keyboard as /devices/virtual/input/input31
retire_capture_urb: 334 callbacks suppressed
usb 3-2.3: new high-speed USB device number 13 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.09
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: FP3
usb 3-2.3: Manufacturer: Fairphone
usb 3-2.3: SerialNumber: A209G1710201
usb 3-2.3: USB disconnect, device number 13
input: solaar-keyboard as /devices/virtual/input/input32
rfkill: input handler enabled
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input33
retire_capture_urb: 38 callbacks suppressed
retire_capture_urb: 342 callbacks suppressed
input: spice vdagent tablet as /devices/virtual/input/input34
[drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
input: spice vdagent tablet as /devices/virtual/input/input35
i2c i2c-3: sendbytes: NAK bailout.
input: spice vdagent tablet as /devices/virtual/input/input36
rfkill: input handler enabled
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input37
retire_capture_urb: 30 callbacks suppressed
retire_capture_urb: 338 callbacks suppressed
rfkill: input handler enabled
retire_capture_urb: 38 callbacks suppressed
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input38
input: solaar-keyboard as /devices/virtual/input/input39
retire_capture_urb: 334 callbacks suppressed
rfkill: input handler enabled
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input40
retire_capture_urb: 42 callbacks suppressed
retire_capture_urb: 342 callbacks suppressed
rfkill: input handler enabled
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input41
rfkill: input handler enabled
[drm:btc_dpm_set_power_state [radeon]] *ERROR* rv770_restrict_performance_levels_before_switch failed
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input42
retire_capture_urb: 10 callbacks suppressed
retire_capture_urb: 338 callbacks suppressed
rfkill: input handler enabled
retire_capture_urb: 46 callbacks suppressed
rfkill: input handler disabled
input: spice vdagent tablet as /devices/virtual/input/input43
input: solaar-keyboard as /devices/virtual/input/input44
retire_capture_urb: 330 callbacks suppressed
warning: `wireshark' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
lo: entered promiscuous mode
usb 3-2.3: new high-speed USB device number 14 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.09
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: FP3
usb 3-2.3: Manufacturer: Fairphone
usb 3-2.3: SerialNumber: A209G1710201
usb 3-2.3: USB disconnect, device number 14
lo: left promiscuous mode
usb 3-2.3: new high-speed USB device number 15 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.09
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: FP3
usb 3-2.3: Manufacturer: Fairphone
usb 3-2.3: SerialNumber: A209G1710201
usb 3-2.3: USB disconnect, device number 15

Return To old_cpu2 System Information