dmesg - 212
Linux version 5.15.0-89-generic (buildd@lcy02-amd64-004) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #99~20.04.1-Ubuntu SMP Thu Nov 2 15:16:47 UTC 2023 (Ubuntu 5.15.0-89.99~20.04.1-generic 5.15.126)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe7ffff] usable
BIOS-e820: [mem 0x00000000dfe80000-0x00000000dfe97fff] ACPI data
BIOS-e820: [mem 0x00000000dfe98000-0x00000000dfebffff] ACPI NVS
BIOS-e820: [mem 0x00000000dfec0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M5A78L-M PLUS/USB3, BIOS 0502 11/18/2016
tsc: Fast TSC calibration using PIT
tsc: Detected 2712.095 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdfe80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
Using GB pages for direct mapping
RAMDISK: [mem 0x2997d000-0x30cb5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB490 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000DFE80100 000054 (v01 111816 XSDT0857 20161118 MSFT 00000097)
ACPI: FACP 0x00000000DFE80290 0000F4 (v03 111816 FACP0857 20161118 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20210730/tbfadt-615)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564)
ACPI: DSDT 0x00000000DFE80460 00D60B (v01 A3690 A3690001 00000001 INTL 20060113)
ACPI: FACS 0x00000000DFE98000 000040
ACPI: FACS 0x00000000DFE98000 000040
ACPI: APIC 0x00000000DFE80390 00008C (v01 111816 APIC0857 20161118 MSFT 00000097)
ACPI: MCFG 0x00000000DFE80420 00003C (v01 111816 OEMMCFG 20161118 MSFT 00000097)
ACPI: OEMB 0x00000000DFE98040 000072 (v01 111816 OEMB0857 20161118 MSFT 00000097)
ACPI: HPET 0x00000000DFE8F460 000038 (v01 111816 OEMHPET 20161118 MSFT 00000097)
ACPI: SSDT 0x00000000DFE8F4A0 000470 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Reserving FACP table memory at [mem 0xdfe80290-0xdfe80383]
ACPI: Reserving DSDT table memory at [mem 0xdfe80460-0xdfe8da6a]
ACPI: Reserving FACS table memory at [mem 0xdfe98000-0xdfe9803f]
ACPI: Reserving FACS table memory at [mem 0xdfe98000-0xdfe9803f]
ACPI: Reserving APIC table memory at [mem 0xdfe80390-0xdfe8041b]
ACPI: Reserving MCFG table memory at [mem 0xdfe80420-0xdfe8045b]
ACPI: Reserving OEMB table memory at [mem 0xdfe98040-0xdfe980b1]
ACPI: Reserving HPET table memory at [mem 0xdfe8f460-0xdfe8f497]
ACPI: Reserving SSDT table memory at [mem 0xdfe8f4a0-0xdfe8f90f]
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
NODE_DATA(0) allocated [mem 0x21ffd6000-0x21fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dfe7ffff]
node 0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone Normal: 384 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: hibernation: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xdfe80000-0xdfe97fff]
PM: hibernation: Registered nosave memory: [mem 0xdfe98000-0xdfebffff]
PM: hibernation: Registered nosave memory: [mem 0xdfec0000-0xdfefffff]
PM: hibernation: Registered nosave memory: [mem 0xdff00000-0xffdfffff]
PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[mem 0xdff00000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2063750
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-89-generic", will be passed to user space.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
PM: hibernation: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 7932960K/8386680K available (16393K kernel code, 4388K rwdata, 10848K rodata, 3356K init, 18724K bss, 453460K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 50171 entries in 196 pages
ftrace: allocated 196 pages with 3 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2717e0799b5, max_idle_ns: 440795334843 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.19 BogoMIPS (lpj=10848380)
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 40K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
smpboot: CPU0: AMD Athlon(tm) II X2 215 Processor (family: 0x10, model: 0x6, stepping: 0x2)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
signal: max sigframe size: 1440
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 2 processors activated (10848.38 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xdfe98000-0xdfebffff] (163840 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 23:47:11, date: 2023-11-29
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1701301630.152:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffdfffff]
TOM2: 0000000220000000 aka 8704M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x220000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
pci 0000:00:07.0: enabling Extended Tags
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfcffa000-0xfcffafff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:128b] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe880000-0xfe8fffff pref]
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe87c000-0xfe87ffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
pci 0000:02:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe9f8000-0xfe9fffff 64bit]
pci 0000:02:00.0: PME# supported from D3cold
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfeaf8000-0xfeafffff 64bit]
pci 0000:03:00.0: PME# supported from D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfebf8000-0xfebfbfff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI: Interrupt link LNKA configured for IRQ 10
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 10
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe80000-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:02: [dma 0 disabled]
pnp 00:03: [dma 0 disabled]
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0b00-0x0b3f] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:06: [io 0x0230-0x023f] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: [io 0x0300-0x030f] has been reserved
system 00:06: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
pnp 00:08: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xdfefffff] could not be reserved
system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff window]
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 297605 usecs
pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6a0 took 31225 usecs
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 31026 usecs
pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6a0 took 31233 usecs
pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a0 took 31015 usecs
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
software IO TLB: tearing down default memory pool
LVT offset 1 assigned for vector 0x400
LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-89-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfcfff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-89-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 5.15.0-89-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 5.15.0-89-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 5.15.0-89-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 5.15.0-89-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 5.15.0-89-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2023-11-29T23:47:12 UTC (1701301632)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 117988K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: microcode updated early to new patch_level=0x010000c7
microcode: CPU0: patch_level=0x010000c7
microcode: CPU1: patch_level=0x010000c7
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1472764668, 278685)->(1480322725, -7279372)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4ec4134f122677377e646ccfa23b85730663b837'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4ec4134f122677377e646ccfa23b85730663b837'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 15:887:808
acpi_cpufreq: overriding BIOS provided _PSD data
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3356K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1440K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.0-89-generic
usb 5-1: new full-speed USB device number 2 using ohci-pci
usb 3-2: new full-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 2712.177 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27182db65f8, max_idle_ns: 440795252618 ns
clocksource: Switched to clocksource tsc
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
usb 5-1: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Xbox360 For Windows
usb 5-1: Manufacturer: ShanWan
usb 5-1: SerialNumber: 10F36D6
xhci_hcd 0000:02:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.15.0-89-generic xhci-hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 5.15.0-89-generic xhci-hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20210730/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20210730/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: pata_atiixp
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
scsi host2: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
scsi host1: ahci
xhci_hcd 0000:03:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 5.15.0-89-generic xhci-hcd
usb usb10: SerialNumber: 0000:03:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 5.15.0-89-generic xhci-hcd
usb usb11: SerialNumber: 0000:03:00.0
scsi host3: ahci
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
r8169 0000:04:00.0 eth0: RTL8168h/8111h, 60:45:cb:a7:5b:e1, XID 541, IRQ 34
r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
usb 3-2: New USB device found, idVendor=058f, idProduct=9254, bcdDevice= 3.12
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Generic USB Hub
usb 3-2: Manufacturer: ALCOR
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 3-2.1: new full-speed USB device number 3 using ohci-pci
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 10-1: new high-speed USB device number 2 using xhci_hcd
usb 3-2.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.1: Product: USB Receiver
usb 3-2.1: Manufacturer: Logitech
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SanDisk SD6SB1M128G1001, X232201, max UDMA/133
ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
hid: raw HID events driver (C) Jiri Kosina
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk SD6SB1M1 201 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-3: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: 802.11n
usb 1-3: Manufacturer: Realtek
usb 1-3: SerialNumber: 2C0547A3B05B
ata5.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 6H05 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 3-2.2: new low-speed USB device number 4 using ohci-pci
r8169 0000:04:00.0 enp4s0: renamed from eth0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:046D:C52B.0001/input/input7
usb 1-4: new high-speed USB device number 4 using ehci-pci
usb 10-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: Product: USB2.1 Hub
usb 10-1: Manufacturer: GenesysLogic
hub 10-1:1.0: USB hub found
hub 10-1:1.0: 4 ports detected
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2.1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C52B.0002/input/input8
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C52B.0002/input/input9
usb 3-2.2: New USB device found, idVendor=05a4, idProduct=9881, bcdDevice= 1.21
usb 3-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05a4:9881 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:05A4:9881.0004/input/input12
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C52B.0002/input/input10
hid-generic 0003:05A4:9881.0004: input,hidraw1: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:12.0-2.2/input0
hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2.1/input1
usb 11-1: new SuperSpeed USB device number 2 using xhci_hcd
hid-generic 0003:046D:C52B.0003: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2.1/input2
input: HID 05a4:9881 Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05A4:9881.0005/input/input13
usb 11-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63
usb 11-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-1: Product: USB3.1 Hub
usb 11-1: Manufacturer: GenesysLogic
hub 11-1:1.0: USB hub found
usb 1-4: New USB device found, idVendor=148f, idProduct=5372, bcdDevice= 1.01
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11 n WLAN
usb 1-4: Manufacturer: Ralink
hub 11-1:1.0: 4 ports detected
input: HID 05a4:9881 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05A4:9881.0005/input/input14
input: HID 05a4:9881 System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05A4:9881.0005/input/input15
hid-generic 0003:05A4:9881.0005: input,hidraw0: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:12.0-2.2/input1
usb 3-2.3: new low-speed USB device number 5 using ohci-pci
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2.1/input2
usb 3-2.3: New USB device found, idVendor=10d5, idProduct=55a2, bcdDevice= 0.01
usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.3: Product: 2Port KVMSwitcher
usb 3-2.3: Manufacturer: Device
usb 3-2.3: SerialNumber: 1"²
input: Device 2Port KVMSwitcher as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:10D5:55A2.0006/input/input16
usb 11-1.4: new SuperSpeed USB device number 3 using xhci_hcd
input: Logitech Wireless Device PID:404b Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:046D:C52B.0003/0003:046D:404B.0007/input/input17
usb 11-1.4: New USB device found, idVendor=0bc2, idProduct=ab21, bcdDevice= 1.43
usb 11-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-1.4: Product: BUP Slim SL
usb 11-1.4: Manufacturer: Seagate
usb 11-1.4: SerialNumber: NA78ZK8W
hid-generic 0003:10D5:55A2.0006: input,hidraw3: USB HID v1.00 Keyboard [Device 2Port KVMSwitcher] on usb-0000:00:12.0-2.3/input0
usbhid 3-2.3:1.1: couldn't find an input interrupt endpoint
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
input: Logitech Wireless Device PID:404b Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:046D:C52B.0003/0003:046D:404B.0007/input/input18
hid-generic 0003:046D:404B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404b] on usb-0000:00:12.0-2.1/input2:1
usbcore: registered new interface driver usb-storage
scsi host6: uas
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Seagate BUP Slim SL 0143 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 2b 00 10 08
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
input: Logitech K400 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:046D:C52B.0003/0003:046D:404B.0007/input/input22
logitech-hidpp-device 0003:046D:404B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:12.0-2.1/input2:1
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-modprobe.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
lp: driver loaded but no devices found
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
systemd[1]: Finished Load Kernel Module chromeos_pstore.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Succeeded.
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@pstore_blk.service: Succeeded.
systemd[1]: Finished Load Kernel Module pstore_blk.
systemd[1]: modprobe@pstore_zone.service: Succeeded.
systemd[1]: Finished Load Kernel Module pstore_zone.
systemd[1]: modprobe@ramoops.service: Succeeded.
systemd[1]: Finished Load Kernel Module ramoops.
systemd[1]: Finished Remount Root and Kernel File Systems.
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Adding 2097148k swap on /swapfile. Priority:-2 extents:14 across:117403428k SSFS
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
lp0: using parport0 (interrupt-driven).
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
loop0: detected capacity change from 0 to 113992
systemd-journald[302]: Received client request to flush runtime journal.
loop1: detected capacity change from 0 to 83672
loop2: detected capacity change from 0 to 657576
audit: type=1400 audit(1701301637.625:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=370 comm="apparmor_parser"
audit: type=1400 audit(1701301637.633:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=371 comm="apparmor_parser"
audit: type=1400 audit(1701301637.645:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=373 comm="apparmor_parser"
audit: type=1400 audit(1701301637.645:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=373 comm="apparmor_parser"
audit: type=1400 audit(1701301637.645:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=373 comm="apparmor_parser"
audit: type=1400 audit(1701301637.649:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=372 comm="apparmor_parser"
audit: type=1400 audit(1701301637.649:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=372 comm="apparmor_parser"
audit: type=1400 audit(1701301637.673:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=376 comm="apparmor_parser"
audit: type=1400 audit(1701301637.677:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=374 comm="apparmor_parser"
audit: type=1400 audit(1701301637.757:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=382 comm="apparmor_parser"
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: crng init done
random: 150 urandom warning(s) missed due to ratelimiting
IPMI message handler: version 39.2
ipmi device interface
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 236
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.157 Wed Oct 12 09:19:07 UTC 2022 (using threaded interrupts)
ATK0110 ATK0110:00: Overriding interface detection
Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
r8169 0000:04:00.0 enp4s0: Link is Down
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.157 Wed Oct 12 09:15:25 UTC 2022
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
vboxdrv: Found 2 processor cores/threads
vboxdrv: TSC mode is Invariant, tentative frequency 2712177153 Hz
vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
loop3: detected capacity change from 0 to 8
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input25
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input26
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input27
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input28
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input29
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input30
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input31
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input32
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input33
usbcore: registered new interface driver xpad
usb 1-4: reset high-speed USB device number 4 using ehci-pci
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 1-4:1.0 wlx7cdd90828bd6: renamed from wlan0
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
caller os_map_kernel_space+0x131/0x170 [nvidia] mapping multiple BARs
r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
caller os_map_kernel_space+0x131/0x170 [nvidia] mapping multiple BARs
wlx7cdd90828bd6: authenticate with b4:75:0e:42:77:90
wlx7cdd90828bd6: send auth to b4:75:0e:42:77:90 (try 1/3)
wlx7cdd90828bd6: authenticated
wlx7cdd90828bd6: associate with b4:75:0e:42:77:90 (try 1/3)
wlx7cdd90828bd6: RX AssocResp from b4:75:0e:42:77:90 (capab=0x1411 status=0 aid=1)
wlx7cdd90828bd6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90828bd6: link becomes ready
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=120)
Initialized host personality
NET: Registered PF_VSOCK protocol family
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:404B.0007: HID++ 2.0 device connected.
show_signal_msg: 23 callbacks suppressed
nautilus[4482]: segfault at 20 ip 00007f0af8abd224 sp 00007fff16894858 error 4 in libgio-2.0.so.0.6400.6[7f0af8a0f000+113000]
Code: 74 0c 31 d2 31 f6 e9 2b 81 02 00 0f 1f 00 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8b 07 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 47 20 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 55 48 83 ec 10 48
nautilus[4633]: segfault at 20 ip 00007f9e23558224 sp 00007ffc66d59d38 error 4 in libgio-2.0.so.0.6400.6[7f9e234aa000+113000]
Code: 74 0c 31 d2 31 f6 e9 2b 81 02 00 0f 1f 00 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8b 07 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 47 20 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 55 48 83 ec 10 48
nautilus[4801]: segfault at 20 ip 00007f0ad67b3224 sp 00007fffe7c5dae8 error 4 in libgio-2.0.so.0.6400.6[7f0ad6705000+113000]
Code: 74 0c 31 d2 31 f6 e9 2b 81 02 00 0f 1f 00 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8b 07 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 47 20 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 55 48 83 ec 10 48
nautilus[5218]: segfault at 20 ip 00007fe380191224 sp 00007ffe0d630e28 error 4 in libgio-2.0.so.0.6400.6[7fe3800e3000+113000]
Code: 74 0c 31 d2 31 f6 e9 2b 81 02 00 0f 1f 00 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8b 07 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 47 20 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 55 48 83 ec 10 48
nautilus[5346]: segfault at 20 ip 00007f157537e224 sp 00007ffe4843c678 error 4 in libgio-2.0.so.0.6400.6[7f15752d0000+113000]
Code: 74 0c 31 d2 31 f6 e9 2b 81 02 00 0f 1f 00 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8b 07 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 47 20 c3 0f 1f 80 00 00 00 00 f3 0f 1e fa 55 48 83 ec 10 48