dmesg - typec128g2
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
st_mag40 7-001e: failed to read Who-Am-I register.
st_mag40: probe of 7-001e failed with error -121
sht4x: probe of 7-0044 failed with error -121
inv-icm42600-i2c: probe of 7-0068 failed with error -121
tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2006000 KHz, changing to: 2035200 KHz
cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz
cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz
tegra194-cpufreq e000000.ccplex: probed with ICC
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000
tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000
tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000
mmc0: CQHCI version 5.10
irq: IRQ303: trimming hierarchy from :interrupt-controller@f400000-1
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 303
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit
tegra194-pcie 14100000.pcie: Link up
tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff])
pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref]
pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
pci 0001:01:00.0: [8086:0d9f] type 00 class 0x020000
pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
mmc0: Command Queue Engine enabled
pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
mmc0: periodic cache flush enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
mmcblk0: mmc0:0001 G1M15M 59.3 GiB
mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0)
pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a81fffff]
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
pci 0001:01:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a80fffff]
pci 0001:01:00.0: BAR 3: assigned [mem 0x20a8100000-0x20a8103fff]
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a81fffff]
pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0001:00:00.0: Adding to iommu group 9
pcieport 0001:00:00.0: PME: Signaling with IRQ 52
pcieport 0001:00:00.0: AER: enabled with IRQ 52
igc 0001:01:00.0: Adding to iommu group 9
igc 0001:01:00.0: enabling device (0000 -> 0002)
igc 0001:01:00.0 (unnamed net_device) (uninitialized): PHC added
igc 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0001:01:00.0 eth0: MAC: 4c:62:7b:00:00:cd
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000
tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000
tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000
tegra194-pcie 14160000.pcie: Link up
tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff])
pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref]
pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot
pci 0004:01:00.0: [1bc0:1002] type 00 class 0x010802
pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0004:01:00.0: PME# supported from D0 D3hot
pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff]
pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit]
pci 0004:00:00.0: PCI bridge to [bus 01-ff]
pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff]
pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0004:00:00.0: Adding to iommu group 10
pcieport 0004:00:00.0: PME: Signaling with IRQ 54
pcieport 0004:00:00.0: AER: enabled with IRQ 54
nvme 0004:01:00.0: Adding to iommu group 10
nvme nvme0: pci function 0004:01:00.0
nvme 0004:01:00.0: enabling device (0000 -> 0002)
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
nvme nvme0: missing or invalid SUBNQN field.
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
vdd-3v3-pcie: supplied by vdd-3v3-sys
nvme nvme0: allocated 16 MiB host memory buffer.
avdd-cam-2v8: supplied by vdd-3v3-sys
vdd-dp: supplied by vdd-3v3-sys
nvme nvme0: 8/0/0 default/read/poll queues
vdd-3v3-sd: supplied by vdd-3v3-sys
nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
(NULL device *): fops function table already registered
tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 303
tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges:
tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000
tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000
tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000
usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb
usb 2-1: New USB device found, idVendor=174c, idProduct=235c, bcdDevice= 0.01
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: AS2235
usb 2-1: Manufacturer: ASMedia
usb 2-1: SerialNumber: 00000000000000000000
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 2-1:1.0
usb 1-4: new high-speed USB device number 3 using tegra-xusb
usb 1-4: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 7.f3
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0 Hub
usb 1-4: Manufacturer: VIA Labs, Inc.
usb 1-4: SerialNumber: 000000001
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 2-3: new SuperSpeedPlus Gen 2 USB device number 3 using tegra-xusb
usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 7.f3
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB3.1 Hub
usb 2-3: Manufacturer: VIA Labs, Inc.
usb 2-3: SerialNumber: 000000001
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
tegra194-pcie 141a0000.pcie: Phy link never came up
tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref]
pci 0005:00:00.0: [10de:229a] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot
scsi 0:0:0:0: Direct-Access ASMT 2235 0 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
sd 0:0:0:0: [sda] Write Protect is off
pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
pcieport 0005:00:00.0: Adding to iommu group 11
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
pcieport 0005:00:00.0: PME: Signaling with IRQ 56
pcieport 0005:00:00.0: AER: enabled with IRQ 56
sd 0:0:0:0: [sda] Attached SCSI disk
pci_bus 0005:01: busn_res: [bus 01-ff] is released
pci 0005:00:00.0: Removing from iommu group 11
pci_bus 0005:00: busn_res: [bus 00-ff] is released
nvethernet 6810000.ethernet: Adding to iommu group 51
nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0
nvethernet 6810000.ethernet: failed to read MDIO address
nvethernet 6810000.ethernet: setting to default DMA bit mask
nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G
nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:dd:d6:f9
-->macsec_probe()
nvethernet 6810000.ethernet: macsec param in DT is missing or disabled